Cable Tenders

Description: The United States Coast Guard Surface Forces Logistics Center Has A Requirement And Requesting Quotations For The Following Part: item 1) 6680 01-598-3339 switch, Liquid Level mfg Name: Gems Sensors Incorporated part_nbr: 213897 qty: 30 gems Sensors Ls-280 Switch, Stem And Cable Assembly stem Material: 304 Ss switch: S.p.d.t rating: 20 Va volts: 0-30 Max Amps .4 Ac - .5 Dc volts: 120 Max Amps: .17 Ac - .13 Dc volts: 240 Max Amps: .08 Ac - .06 Dc cable: 3 Cond. #18 Awg, Rubber Jacketed, 10' Length each Switch Shall Be Individually Packaged In Accordance With Mil-std-2073-1e Method 10, Cushioned And Packed In An Appropriately Sized Astm-d5118 Double-wall Fiberboard Box. marking Iaw Mil-std-129r Except Bar Coded Iaw Iso/iec-16388-2007, Code 39 Symbology all Items Are Inspected When Delivered To The Coast Guard Warehouse. Failure To Meet The Requirements For Packaging, Packing, Marking (pp&m) And Bar-coding Will Result In The Item(s) Being Rejected And Possibly Returned To The Vendor. This Will Delay Payment. Any Questions Concerning The Pp&m Requirements Or Bar-coding Should Be Addressed With The Contracting Officer Prior To Contract Award. delivery Shall Be F.o.b. Destination To Uscg Surface Forces Logistics Center, 2401 Hawkins Point Road, Baltimore Md 21226 substitute Parts Are Not Acceptable. It Is Anticipated That A Non-competitive Sole Source Purchase Order Shall Be Awarded As A Result Of This Synopsis/solicitation. It Is The Government’s Belief That Only Gems Sensors And/or Their Authorized Distributors Can Provide This Unit. Concerns Having The Expertise And Required Capabilities To Provide This Item Are Invited To Submit Complete Information Discussing The Same Within Two (2) Calendar Days From The Day This Notice Posted. The Data Must Include Sufficient Detail To Allow The Coast Guard To Evaluate The Proposal Relative To The Requirements. The Information Submitted Must Include A Letter From The Oem Verifying The Offeror Is An Authorized Distributor, And Verifying The Oem Will Supply Genuine Oem Parts. this Is A Combined Synopsis/solicitation For A Commercial Item Prepared In Accordance With The Format Outlined In Far Subpart 12.6, 2025-01 11/12/2024 And As Supplemented With Additional Information Included In This Notice. This Announcement Constitutes The Only Solicitation. Quotations Are Being Requested And A Written Solicitation Will Not Be Issued. The Naics Code For This Solicitation Is 333998 And The Business Size Standard Is 500. The Resultant Purchase Order Will Be Awarded Using Simplified Acquisition Procedures In Accordance With Far 13 the U.s. Coast Guard Intends To Award On An All Or None Basis To A Responsible Offeror Whose Offer Conforming To The Solicitation Will Be The Most Advantageous To The Government. Award Will Be Lowest Price Technically Acceptable. The Coast Guard Intends To Award On A Firm Fixed Price Contract. all Responsible Sources May Submit A Quotation Via Email To Eric.i.goldstein@uscg.mil, Which If Timely Received, Shall Be Considered By The Agency. Companies Must Have Valid Duns Numbers And Be Registered With Systems For Award Management (sam) And Shall Provide The Company Tax Information Number (tin) With Their Offer. The Closing Date And Time For Receipt Of Quote Is Jan 21th, 2025 At _9:00 Am Eastern Standard Time offerors Must Submit The Following Information On Their Quote: disclosure: The Offeror Under This Solicitation Represents That [check One]: __ It Is Not A Foreign Incorporated Entity That Should Be Treated As An Inverted Domestic Corporation Pursuant To The Criteria Of (hsar) 48 Cfr 3009.104-70 Through 3009.104-73; __ It Is A Foreign Incorporated Entity That Should Be Treated As An Inverted Domestic Corporation Pursuant To The Criteria Of (hsar) 48 Cfr 3009.104-70 Through 3009.104-73, But It Has Submitted A Request For Waiver Pursuant To 3009.104-74, Which Has Not Been Denied; Or __it Is A Foreign Incorporated Entity That Should Be Treated As An Inverted Domestic Corporation Pursuant To The Criteria Of (hsar) 48 Cfr 3009.104-70 Through 3009.104-73, But It Plans To Submit A Request For Waiver Pursuant To 3009.104-74. (g) A Copy Of The Approved Waiver, If A Waiver Has Already Been Granted, Or The Waiver Request, If A Waiver Has Been Applied For, Shall Be Attached To The Bid Or Proposal. (end Of Provision) the Following Far Clauses Provisions Apply To This Solicitation. Far 52.212-1, Instructions To Offerors-commercial Items (june 2020); Far 52.212-3, Offeror Representations And Certifications-commercial Items (november 2020) With Alternate I. Offeror(s) Must Include A Completed Copy Of Far 52.212-3 With Their Quote. the Following Far Clauses Apply To This Solicitation. Offerors May Obtain Full Text Versions Of These Clauses Electronically At Www.arnet.gov.; Far 52.212-4, Contract Terms And Conditions-commercial Items (oct 2018); Far 52.212-5, Contract Terms & Conditions Required To Implement Statutes Or Executive Orders-commercial Items (november 2020). The Following Clauses Listed Within Far 52.212-5 Are Applicable: 52.219-4, Notice Of Price Evaluation Preference For Hubzone Small Business Concerns (october 2022) 52.219-28, Post Award Small Business Program Rerepresentation (feb 2024) 52.222-3, Convict Labor (june 2003) 52.222-19, Child Labor—cooperation With Authorities And Remedies (feb 2024) (e.o. 13126). 52.222-21, Prohibition Of Segregated Facilities (apr 2015). 52.222-26, Equal Opportunity (sep 2016) (e.o. 11246). 52.222-36, Equal Opportunity For Workers With Disabilities (jun 2020) (29 U.s.c. 793). 52.222-50, Combating Trafficking In Persons (nov 2021) 52.226-8, Encouraging Contractor Policies To Ban Text Messaging While Driving (may 2024) 52.225-13, Restrictions On Certain Foreign Purchases (feb 2021) 52.232-33, Payment By Electronic Funds Transfer— System For Award Management (october 2018) the Following Items Are Incorporated As Addenda To This Solicitation: Copies Of Hsar Clauses May Be Obtained Electronically At Www.dhs.gov. cgap 3042.302-90 Valuation Requirements For The Acquisition Of Spare Parts Purchased For Inventory Control Points From Hq Contracts (oct 2008). Copies Of Cgap Clauses May Be Obtained Electronically At: Www.uscg.mil/acquisition/procurement/pdf/cim_4200_19h.pdf

Description: Posted Answers To Questions That Was Submitted By 6 Jan 2025. Posted Answers Jan 8, 2025. (see Attached) this Solicitation Has Been Revised With New Proposal Date(13 January 2025) And A Site Visit Scheduled For( 3 January 2025) please Review All Attachments: statement Of Work(sow) Dated 8 Aug 2024. salent Characterisitcesdated 8 Aug 2024 revised Solicitation submit Any Questions And Answers On Sheet Provided the Contractor Shall Provide All Personnel, Equipment, Supplies, Tools, Materials, And All Non-personal Services Necessary For Purchase And To Install One Industrial Ceiling Fan In Support Of The 344th Training Squadron (trs), At Lackland Bldg. 10904 As Defined In This Statement Of Work (sow) Offerors Shall Inspect The Site Where Services Are To Be Performed And To Satisfy Themselves Regarding All General And Local Conditions That May Affect The Cost Of Contract Performance, To The Extent That The Information Is Reasonably Obtainable. specific Requirements: 1.3.1. The Industrial Ceiling Fan Shall Be Mounted To Structural Beams And Shall Have Safety Cables. 1.3.2. The Contractor Shall Hang The Industrial Ceiling Fan With Mount From The Manufacturer And Installed In Accordance With Manufacturer Specifications. 1.3.3. The Contractors Shall Make Electrical Connections From The Industrial Ceiling Fan To The Power Panel. 1.3.4. Structural Grade 8.8 Bolts Shall Be Used For Mounting. 1.3.5. Wiring Shall Be In Electrical Conduit (no Exposed Wires.) 1.3.6. The Contractor Shall Insure That All Possible Deflection, Vibration, Torque, And Other Such Detrimental Forces Are Considered, Controlled, And Eliminated As Necessary. 1.3.7. The Contractor Shall Provide And Install All Metal Conduit, Fittings, Boxes Wire, And Switches Necessary To Establish Full And Necessary Electrical Circuits And Ensure A Perfectly Working And Code Compliant Ceiling Fan System. 1.3.8. Industrial Ceiling Fan Shall Have A Minimum Drop From Support Beam Of 12”. 1.3.9. Contractor Shall Install The Fan (bldg. 10904) On Main Structural Ceiling Beam 35’ 8” From South Wall And 75’ From The East Wall. Fan Shall Be Centered Between Vertical Beams. 1.3.10. Contractor Shall Install A Ceiling Fan Control Box 44’ From The East Wall Next To The Current Light Switch At The South Entrance/exit Door.

Description: This Is A Notice Of Intent To Award A Sole Source Contract And Not A Competitive Request For Quote. This Notice Of Intent Is Not A Request For Competitive Proposals. This Is Not A Solicitation Or Request For Offers. No Solicitation Package Is Available. Only One Responsible Source And No Other Supplies Or Services Will Satisfy Agency Requirements.the National Park Service, Con Ops Strategic, Intends To Issue A Sole Source Award For The Following Innovasea Marine Systems Canada Inc Equipment For The St. Croix, Nsr, Saint Croix Falls, Wi.vemco Rx-live Cabled Receivers – Fathom Live Real Time Detection System (2ea)vemco Nextrak R1 Acoustic Receivers – (5ea)vemco Coded Transmitters 69 Khz – (150 Total)specifically:• v8-4x-a69-2801; Rounded Case (mooneye) (40 Total)• v13-1x-a69-2801; External Cap (longnose Gar) (20 Total)• v13-1x-a69-2801; Rounded Case (channel Cats) (10 Total)• v16-6x-a69-2801; Rounded Case (lake Sturgeon, Flathead Catfish Etc.) (50 Total)• v16tp-6x-a69-2951; Rounded Case (flatheads) (10 Total)o sensor Transmit Ratio (t:p) = 1:1 Temp Range -5 ~ 35 C; Depth Range 34 Meters O on 3650 Days; Power H; Random Delay: 90 To 150 Seconds Loop Back To Step 1 Estimated Tag Life 3650 Daysthe National Park Service Intends To Procure Vemco Receivers And Fish Tags From One Source Under The Authority Of Far 13.106-1(b) For Purchases Not Exceeding The Simplified Acquisition Threshold Of $250,000. This Will Be A Commercial Acquisition Using Simplified Acquisition Procedures And Will Be Classified Under North American Industry Classification System (naics) 334511 With A Small Business Size Standard Of $1.350. Interested Parties May Identify Their Interests And Capability To Respond To This Requirement Within Five (5) Calendar Days Of The Publication Of This Notice. Any Response To This Notice Must Show Clear And Convincing Evidence That Competition Would Be Advantageous To The Government. Information Received Will Be Considered Solely For The Purpose Of Determining Whether Or Not To Conduct A Competitive Procurement. A Determination By The Government Not To Compete This Proposed Purchase Order Based Upon Response To This Notice Is Solely Within The Discretion Of The Government. No Reimbursement For Any Cost Connected With Providing Capability Information Will Be Provided.

Description: Condemned Diesel Loco No.36142 Wds/6 With Iron, Steel And Non-ferrous. Restricted Items: 1. Complete Wheel Set With Gear Without Axle Box Equal To 06 Sets. 2. Piston Main ( 22 Kg Each) Equal To 06 Nos. List Of Removed Items: 1. Air Brake Valves And Cocks 01 Set. 2. Fttm Blower 01 Number. 3. Radiator Core 01 Number. 4. Lube Oil Pump 01 Number. 5. Radiator Fan 01 Number. Non- Ferrous Unserviceable Items To Be Handed Over To Purchaser: 1. Car Body Cables Equal To 01 Set. 2. Radiator Core 01 Number. 3. Epc, Reverser & Bkt Equal To 01 Set. 4. Traction Motor Equal To 06 Nos. 5. Traction Generator Equal To 01 Nos. 6. Auxiliary Generator & Exciter Equal To 02 Nos. 7. Fpm & Ccem Equal To 02 Nos. 8. Suspension Bearing Equal To 24 Nos. Remark: 1. Restricted Items To Be Returned To The Stockholder In Good Condition By The Purchaser At The Time Of Delivery. 2. Lot No. Is Painted On Loco. 3. Approach Road Is Available Up To The Lot. 4. Hsd Oil And Lubricants If Found To Be Returned To The Stockholder. 5. Loco Is Presently Stabled At Diesel Loco Shed Kurla, After Auction And Before Handing Over, Loco Will Be Placed At Cla Yard For Cutting And Delivery Purpose. Purchaser Is Advised That Loco Will Be Placed Only After Certification Of Line By Sse/pway/mnkd And As Advised By Sse/d/cla. 6. After Purchaser Submit All The Documents And D.o. After Auction To Adme/d/cla Office, Sse/d/cla In Consultation With Sse/p.way/mnkd Will Decide The Date Of Placement Of Loco At Cutting Yard And Only After Handing Over Of Loco Will Be Done. 7. Purchaser Has To Ensure Safety Of Railway Assets And His Labour While Working In Railway Premises. If Any Losses Arise Due To Negligence, The Purchaser Will Be Fully Responsible. 8. Purchaser Has To Personally Visit The Site And See The Lot. No Claim Will Be Entertained After Sale Of Lot. 9. Purchaser Has To Keep Enough Water/ Sand At The Cutting Site. 10. Lot Is Ok For Sale. Location: Presently Stabled At Diesel Loco Shed Kurla. Stockholder: Adme D Cla.

Description: Dismantling Of Abandoned/condemned Railway Shed No. 8 Consisting Of - Columns, Base Plate, Top Plate, Truss, Cantilever, Cross Bracket, Plate/cleat, Purline, Side Angle, Cross Bracing, Angle Above Gate, Flat, Ac Sheet, G.i.sheet, Shutters. Remarks - Lot Is Approachable By Pakka Road. The Delivery Of M.s. Ferrous/gi Sheet/shutters Will Be Made On Actual Weighment Basis Only At Hbhr Depot. The Weighment Will Be Done At Hbhr Depot. The Items Mentioned In The Description Only Will Be Delivered. Delivery Of Ac Sheet (1787.3m2 (approx.) Will Be Done On As Is Where Is Basis. No Claim Will Be Entertained For Any Shortage Of Ac Sheets. Lot Number Is Exhibited/painted On The Shed. The Quantity Is Worked Out On Approximate Basis. In Case Of Excess Quantity Of Ferrous Entire Quantity To Be Lifted By The Purchaser By Payment For Difference Of Actual Quantity Delivered With Lot Quantity. Materials Like Electric Wires, Fittings & Cables And Other Such Kind Of Materials Available Inside The Shed Which Is Not Within The Scope Of Lot Description, Shall Be Handed Over By The Purchaser To Custodian. The Items Used In Fencing Around The Structure Such As Rail, Tie Bar, Jali, Stone, Bricks, Wooden Pillar Or Any Other Items And Similar Type Of Material Lying Nearby The Structure/lot Will Not Be Delivered. Dismantling & Cutting Is Allowed For Easy Loading Purpose At The Risk & Cost Of The Purchaser. Dismantling Is Permitted Upto Ground Level Only. The Purchaser Should Ensure That During Dismantling & Cutting Operation No Nearby Structure/building Should Be Affected And Take Necessary Care/safety Precautions To Avoid Any Mishap As Well As Damage To Railway Property. The Purchaser Will Be Fully Responsible If Any Accident/unusual Incident Occurs At Work Site/place During Dismantling. Extra Precaution To Be Taken If There Are Trees Near The Structure Or Its Branches Are Spread Over The Same. Train Operations And Other Railway Work Should Not Be Disturbed/affected. All Debris Should Be Cleared Before Completion Of Delivery. The Purchaser Is Advised To See The Lot Site/content Before Bidding. No Claim Will Be Entertained After Sale Of Lot. Lot Is Ok For Sale With Above Observations. Qty - Ferrous - 70.042 Mts. (approx.), G.i. Sheet - 0. 628mts. (approx), Shutter - 0.254 Mts. (approx). Total Qty (ferrous) - 70.924 Mts. (approx). Location - Wadibunder Yard. Stock Holder - Sse (works) Wadi Bunder. Note - Free Delivery Period Up To 80 Days. Note - Original Lot No. 520223101006.

Description: Scrap Redundant Line Pachora -jamner (n.g) Mixed Up With Different Items Of P.way Materials Consisting Of Rails 69 Lbs & 90 R , C I Pots 69/82 With Tie Bars & Cotter Pin Various Size, Fish Plates Various Size, Fish Bolt Various Size, Check Rail 69 Lbs ,guard Rail 90 R, M S Keys, Steel Channel Sleeper, J/n Fish Plate, C.i Chairs 69 Lbs With Rail Screw, St Sleeper, Dog Bolt & Taibars At Br No 422/2. Complete Details As Per The Annexure.free Delivery Period May Be Upto 65 Days 1) Lot Is Approachable By Kuchha /pakka Rasta. Delivery Possible In Dry Season Only. 2) Ss-11 No. : - Sc/2024-25/13 Dt.04/06/2024 2) Ds8 Note No. 0063653 Dtd-04/06/2024 3) Lot Number Board Is Exhibited / Painted. 4) Similar And Other Type Of P.way Materials Are Laying Nearby Lot Will Not Be Delivered. 5) If Any Other Than P.way Materials Found Will Not Be Delivered. 6) It Is Strictly Advised To Bidder To See The Lot Personally & Loading Point Before Bidding For The Lot In E-auction. 7) Lot Will Be Sold On ¿by Lot Basis¿. 8) As Per Ss-11 The Quantity Is Physically Available At Location. 9) Lot Is In Order/ Ok And Can Be Put Up For Auction Sale. 10) After Joint Lot Inspection, If Any Addition, Deletion, Alteration & Variation Come In The Lot, Stock Holder Will Be Fully Responsible. 11) Materials Other Than Description Not To Be Delivered. 12) Wooden Sleepers Laid In Track Will Not Be Delivered. 13) At Level Crossing, Gate Operating Equipment¿s & Lifting Barriers, Rail Post, Fencing Will Not Be Delivered. 14) At Girder Bridges, Steel Girders, Materials Of Pathway, Railing, And G.i Pipe Carrying Cables Will Not Be Delivered. 15) Any Materials Other Than Redundant Line Lying & Erected On Both Side Of The Track Will Be Retained By The Custodian. 16) Weight Shown Are Indicative & Railway Will Not Be Responsible For Any Shortage. 17) After Handing Over The Relevant Line/siding The Purchaser Will Be Fully Responsible For The Dismantling And Removal Of The Released Materials. Any Loss/damage That May Arise From The Date Of Acceptance Of The Offer Of The Successful Purchaser By Pcmm To The Date Of Complete Removal Of All Released Material From The Site, Due To Theft, Accident, Flood Etc. Shall Be The Sole Responsibility Of The Purchaser And No Claim On This Account Will Be Entertained By The Railways Under Any Circumstances.

Description: CATEGORY: Welding 10H work housing, P. No. : K-SWS-10H-D-WSH, Make- Swagelok , Welding System 10H-D Motor side housing, P. No. : SWS-10H-D-MSH, Make -Swagelok , Welding system Socket Head Cap, SHCS 4-40 X 1.250 IN. P. No. : K-13162, Make -Swagelok , Welding system Socket Head, SHSC 4-40 x 0.625 in, P. No. : K-13160, Make - Swagelok , Welding system Work Extension Bar, P. No. : K- 21093, Make -Swagelok , SS Button Head Screw, 4-40 x 0.250 in. P. No. : K-188-21066-RCEU, Make -Swagelok , Welding System Plastic Ball Bearing 10H weld head, P. No. : K-11154, Make Swagelok , Welding system 20 Series Socket Head, SHCS 2-56 X 0.250 IN, P. No. : K-13176, Make - Swagelok , Welding System Electrode Clamping Plate, 5H weld head SS metal part, P. No. : K-11204, Make -Swagelok , Welding System 10/20 Series Ceramic, 10H, 20H, weld head Ceramic Insert part, P. No. : K-11210, Make , Welding system Socket Head Cap, SHCS 4-40 X 0.500 IN, P. No. : K- 13163, Make -Swagelok , Welding System Work plate, 10H weld head Brass metal work part, P. No. : K-11054, Make - Swagelok , Welding system weld head screw, P. No. : K-188- 13124-RCEU, Make -Swagelok , SS Pan Head Screw, 4-40 x 0.250 in, P. No. : K-188-21066-RCEU, Make -Swagelok , Welding System 20H Gear Assembly, 10H-20H Gear Assembly ss metal gear part, P. No. : 10009-5, Make -Sw , Welding System Gear Assembly 10H Series, 5H and 10H weld head gear SS metal gear part, P. No. : 10009 , Welding system Plastic socket head cap screw, 5, 10, 20, series weld head SHCS 6-32 X 0.437 IN, P. N , Welding system Locking Tab For CWS-10TFB, 10H weld head, P. No. : K-12148, Make -Swagelok , Welding System Ceriated Tungsten, Electrode Diameter (D) = 0.062" and Electrode Length (L) = 1.105" No , Welding System Ceriated Tungsten, Electrode Diameter (D) = 0.062" and Electrode Length (L) = 0.855" No , Welding System 230v, M200 Power, Welding machine Power cord cable, P. No. : CWS-CORD-10, Make -Swagel , Welding System Thermal Printer Paper for Swagelok Welding System Power Supply Printers (10 Rolls) , P , Welding system Split Lock Washer 5H, 10H, 20H series Extension Bar washer, P. No. : K-13208, Make -Sw

Description: CATEGORY: Labour Charges for Repair of vehicle heat and radiator cleaning testing etc for Repair of TATA Telcoline BA No 14C 098631K under GE I AF Shillong , Labour Charges for Repair to engine pulling weak repairing etc for Repair of TATA Telcoline BA No 14C 098631K under GE I AF Shillong , Labour Charges for Changing of Engine Oil, complete testing etc for Repair of TATA Telcoline BA No 14C 098631K under GE I AF Shillong , Labour Charges for Repairing of meter testing and commissioning etc for Repair of TATA Telcoline BA No 14C 098631K under GE I AF Shillong , Supply of Water Pump for Repair of TATA Telcoline BA No 14C 098631K under GE I AF Shillong , Supply of Radiator Fan with Pulley for Repair of TATA Telcoline BA No 14C 098631K under GE I AF Shillong , Supply of Heat Meter Switch for Repair of TATA Telcoline BA No 14C 098631K under GE I AF Shillong , Supply of Coolant for Repair of TATA Telcoline BA No 14C 098631K under GE I AF Shillong , Supply of Distilled Water for Repair of TATA Telcoline BA No 14C 098631K under GE I AF Shillong , Supply of Fuel Injector Pump Head for Repair of TATA Telcoline BA No 14C 098631K under GE I AF Shillong , Supply of Injector Nozzle Element for Repair of TATA Telcoline BA No 14C 098631K under GE I AF Shillong , Supply of FIP Bearing Set for Repair of TATA Telcoline BA No 14C 098631K under GE I AF Shillong , Supply of FIP Cam Plate for Repair of TATA Telcoline BA No 14C 098631K under GE I AF Shillong , Supply of FIP VAN Pump for Repair of TATA Telcoline BA No 14C 098631K under GE I AF Shillong , Supply of Fuel Injector Pump Assy Gasket for Repair of TATA Telcoline BA No 14C 098631K under GE I AF Shillong , Supply of Manifold Joint for Repair of TATA Telcoline BA No 14C 098631K under GE I AF Shillong , Supply of Mobil Oil for Repair of TATA Telcoline BA No 14C 098631K under GE I AF Shillong , Supply of Mobil Filter for Repair of TATA Telcoline BA No 14C 098631K under GE I AF Shillong , Supply of Diesel Filter for Repair of TATA Telcoline BA No 14C 098631K under GE I AF Shillong , Supply of Air Filter for Repair of TATA Telcoline BA No 14C 098631K under GE I AF Shillong , Supply of Kilometer Cable for Repair of TATA Telcoline BA No 14C 098631K under GE I AF Shillong , Supply of Fuse for Repair of TATA Telcoline BA No 14C 098631K under GE I AF Shillong

Details: The Scope Of Work Includes To Procure And Install An Operable, New, Dedicated, Flir Enterprise Cctv Camera Monitoring And Storage System, Utilizing Multicast Methodology Including But Not Limited To The Installation Of Dedicated Fiber-optic Backbone Network, Fiber Patch Panels, Cat 6 Cables, Switches, Servers, And Multiple Monitoring Stations, A Duplicate Redundant Server System For Backup Video And Audio Storage, Software Applications To Support And Secure The System. Including Configuration, Testing And Commissioning Of The Security System, Software Applications And Assist With Connection To Existing Low Voltage Network System Managed By The Los Angeles County Internal Services Department. The Project Also Consists Of Procuring And Installing Two New Cooling Units To Mitigate New Heat Loads, Necessary Electrical System Work And Plumbing Condensate Lines. To View, Print Or Download The Project Documents, Please Visit Https://dpw.lacounty.gov/contracts/opportunities.aspx The Scope Of Work Includes To Procure And Install An Operable, New, Dedicated, Flir Enterprise Cctv Camera Monitoring And Storage System, Utilizing Multicast Methodology Including But Not Limited To The Installation Of Dedicated Fiber-optic Backbone Network, Fiber Patch Panels, Cat 6 Cables, Switches, Servers, And Multiple Monitoring Stations, A Duplicate Redundant Server System For Backup Video And Audio Storage, Software Applications To Support And Secure The System. Including Configuration, Testing And Commissioning Of The Security System, Software Applications And Assist With Connection To Existing Low Voltage Network System Managed By The Los Angeles County Internal Services Department. The Project Also Consists Of Procuring And Installing Two New Cooling Units To Mitigate New Heat Loads, Necessary Electrical System Work And Plumbing Condensate Lines. To View, Print Or Download The Project Documents, Please Visit Https://dpw.lacounty.gov/contracts/opportunities.aspx More

Description: Public tender Vob/a fire damage restoration FD primary school Hasengrund Rüsselsheim am Main - elevator system The subject of the tender is elevator work and the creation of a smoke extraction system (RAS). The elevator will be constructed so that it serves 3 stops (split level) as a through-loader. The elevator system must be able to be converted into an elevator that serves 4 stops (additional stop on the 2nd floor) through simple adjustments (additional door, raising the motor, extending the rails and cables). The elevator work will take place in the inner courtyard (enclosed inner courtyard, no direct access from outside) of the building. This is accessible through the 1st floor. The basement (main building site access) can be reached on foot (approx. 25 m) or the ground floor (approx. 2.5 m, this floor will not be renovated and is to be regarded as finished). A mobile crane can be positioned; the required outreach is approx. 3.5 m over a two-storey building. This must be factored into the respective positions and is not paid for separately!