Cable Tenders

Details: Description 1 Item Car Wash Supplies And Equipment Wet And Dry Vacuum Cleaner Cleaning For Both Wet And Dry Applications. Max Watts: 1600 Watts Voltage: 220v-240v~50/60hz Tank Size: 25l Php8,047.00 1 Item Portable Air Blower Voltage: 220v-240v~50/60hz Input Power: 600w Max Blowing Speed Rate: 0 -3.5m3/min Variable Speed Php1,584.70 1 Item 5 Step Aluminum Ladder Heavy Duty Featherweight Foldable For Easy Storage Slip-proof Vinyl Footing Php3,716.70 2 Item Car Shampoo 20 Liters (container) Ph Neutral – Safe For All Finishes Hi-concentrate Php2,340.00 11 Item Drying Cloth Microfiber Size: 18” X24” Php5,005.00 1 Item Mechanic Repair And Maintenance Tools Click Torque Wrench 18” ½” Drive Torque Range: 42-210 Nm Length: 18” Php3,900.00 1 Item Click Torque Wrench 14” ½” Drive Torque Range: 19-110 Nm Length: 14” Php5,200.00 1 Item Combination Wrench 26 Pcs Set Open Ends And Box Ends Included Sizes: 6,7,8,9,10,11,12,13,14,15,16,17, 18,19,20,21,22,23,24,25,26,27,28,29,30,32mm Drop Forged, Heated Steel Php11,050.00 1 Item Double Ring Box Wrench 12 Pcs Set Box Ends Included Sizes: 6x7, 8x9, 10x11, 12x13, 14x15x 16x17, 18x19, 20x22, 21x23, 24x26, 25x28, 30x32mm Drop Forged, Heated Steel Php7,540.00 1 Item Cordless Impact Wrench 800 Nm 800 Nm Brushless Motor ½” Drive 21 Volts 2x15 Cells (6ah) Battery Tool Case Php5,850.00 1 Item Cordless Impact Wrench 330 Nm 330 Nm Brushless Motor ½” Drive 21 Volts 2x15 Cells (6ah) Battery Tool Case Php3,900.00 1 Item Breaker Bar Wrench 24” ½” Drive Length: 24” Php1,675.70 1 Item Breaker Bar Wrench 15” ½” Drive Length: 15” Php715.00 1 Item Snap Ring Pliers 4 Pcs Set 1x180mm Straight Circlip Pliers, Internal 1x180mm Bent Circlip Pliers, Internal 1x180mm Straight Circlip Pliers, External 1x180mm Bent Circlip Pliers, External Php2,338.70 1 Item Oil Filter Locking Plier Jaw Capacity: 2 1⁄8” - 4 5⁄8” Php845.00 1 Item Impact Driver Kit Set ½” Drive With Included Philips And Slotted Bits Php1,664.00 1 Item Grease Gun Capacity: 400cc Working Pressure: Up To 4500psi Php1,001.00 1 Item 12/24 V Battery Charger Dual Charging Voltage 12v And 24v With Over-load Protection With Fast Charging Mode Php5,185.70 1 Item Booster Cable 600a Minimum Length: 3m Php2,340.00 11 Item Driver And Vehicle Emergency Tool Kit Combination Wrench 10 Pcs Set Included Sizes: (8,9,10,11,12,13,14,17,19, 22mm) Php8,937.50 11 Item Vice Grip, 10” Curved Jaw Size: 10” Php6,134.70 11 Item Adjustable Wrench, 10” Size: 10” Php3,989.70 11 Item Combination Pliers, 8” Size: 8” Php6,134.70 11 Item Slip Joint Pliers, 8” Size: 8” Php1,844.70 11 Item Long Nose Pliers, 8” Size: 8” Php4,647.50 11 Item Screw Driver, Philips, 10” Philips Head Size: 5/16” X 10” Php1,401.40 11 Item Screw Driver, Flat, 10” Flat Head Size: 5/16” X 10” Php1,401.40 11 Item Plastic Tool Box, 16” Size: 16” Php5,133.70 11 Item Car Phone Charger Four (4) Usb Power Adapter Qc 3.0 Fast Charging Ports With Extended Wire Php4,404.40 11 Item Portable Fire Suppresor Type: Abck Weight: 350 G Php10,010.00 11 Item Emergency First Aid Kit Includes: Hydrogen Peroxide 10%, Povidine Iodine, Isopropyl Alcohol, Cotton, Bantam Plastic Strips, Gauze Pads, Gauze Bandages, Paper Tape, Face Masks, Flashlight, Water Disinfectant. Php6,563.70 Total Amount Php134,501.90

Details: The Purpose Of This Synopsis Is To Provide Notice Of Naval Information Warfare Center (niwc) Atlantic's Intent To Award A Firm-fixed-price Purchase Order On A Noncompetitive Basis To Climax Portable For 1 Climax 105215 Flange Facer, Model Ff8200 Id Chuck Hyd Turning Arm C-weight Metal 1ea2 Hp 93724 Laptop, Model Hp1000 208-230v Controls Pendant C050 H050 1ea. The Government Intends To Negotiate Solely With Climax Portable Under The Authority Of Far 13.106-1(b). A Request For Information Was Posted To The Government Point Of Entry On 9/18/2024 Until 10/9/2024 For The Following Requirement For The Flange Facer And Hpu Of Armored Military Vehicles. Machine Performance Rangesid Mounting Range45 - 120 Inches (1143.0 - 3048.0 Mm)facing Diameter Range 45 - 120 Inches (1143.0 - 3048.0 Mm)milling Diameter Range 45 - 120 Inches (1143.0 - 3048.0 Mm)grinding Diameter Range 45 - 120 Inches (1143.0 - 3048.0 Mm)swing Diameter @ Minimum With Feedbox On End Of Arm84.7 Inches (2151.4 Mm)radial Tool Slide Travel 12 Inches (304.8 Mm)axial Tool Head Travel 4 Inches (101.6 Mm)depth Required Inside Bore For Id Chuck (± 0.25 Inches (± 6.4 Mm) Is Travel Of Leveling Foot)12.13 ± 0.25 Inches (308.1 ± 6.4 Mm)feed Rate 0.002 - 0.040 In/rev (0.051 - 1.016 Mm/rev)rotational Drive Systemdrive Type Hydraulic Drive Withpinion And Internal Ring Gearpinion Gear To Ring Gear Reduction 7.429:1single Point Turning Speed Range:2.8 - 14 Rpmmilling & Grinding Speed Ranges (with 150:1 Reducer):0.002 - 0.374 Rpmpower Input Requirements10 Gpm@1200 Psi 37.9 L/min @ 8273 Kpatesting Data - Flatness At 82 Inch (2083 Mm) Diameter: 0.0068 Inches (0.17 Mm)on A Dedicated Fixture Made Of A-36 Steel In A Controlled Environment With Single Point Machine, After Warm-up.tool Configurationssingle-point Machining Only1. Base Packagerotary Table, Tool Kit, Operator's Manual 2. Feed Assemblypneumatic Feed Assembly W/ Remote Air Control 3. Drive Motor Assemblyhydraulic Drive Assy W/ Feed Conditioning Unit - Does Not Include Motor(hydraulic Drive System Includes: Hyd Motormount, Hoses, Fittings, Rotary Union, Feed Trip Valve,cam, And Feed Pneumatic Conditioning Unit.)4. Hydraulic Motor For Rotary Table Drive (if Hydraulic Drive Isselected In Step 3). Rated At 10 Gpm, 1200 Psi18.7 Cu In (306.4 Cu Cm), 2.8 - 14 Rpm 5. Turning Arm Assemblyturning Arm Assembly With Single Point Tool Head 6. Counterweight Assemblycounterweight Assembly 7. Chuck Assemblyid Chuck Assembly 8. Shipping Containermetal Container For Id Mount Machinehydraulic Power Units For Single Pointinghorsepower 10 Hpgpm Flow / Hz 10 Gpm @ 60 Hz 8.36 Gpm @ 50 Hzspeedto Be Rated For 15gpm (56.7 L/min) Max Continuous Use, 20 Gpm (75.7 L/min) Max Intermittent Use. Intermittent Is Defined As 10% Of Each Minuteoperating Range-10°f ( –23°c) - 200°f (93°c)oil Temperature Range50°f (10°c) - 190°f (88°c)cordset/hose Length 50 Ft (15m)hydraulic Quick Disconnect Couplingsiso 16028control Functions System Start, E-stop, Jog, And Remote Speed Dial Controloperator Pendant Accessory Needed Functions:-remote Pendant-3 Axis Pendant Control-hydraulic Locking Feature-built-in System Relief Valve And System Pressure Gauge-osha Compliant-speed Control Allowing The Operator To Set Repeatable Speed Settings And Easily Make Small Speed Adjustments When Needed.-soft Start/stop Control Ensuring Smooth Starting And Stopping On Large Machines, Preventing Damage To The Drive And Feed.-controlled Deceleration Preventing Over-pressurization Of The Hydraulic System Allowing The Operator To Decelerate The Machine Tool In A Safe And Controlled Manner, Especially When The "emergency Stop" Is Used.-controlled Motion Of The Machine Tool Minimizing Sudden Speed Changes Preventing Rapid Acceleration When A Cutting On Uneven Surfaces-replaceable Cordset With Quick Connectors At Both Ends Of The Cable.-magnetic Back Allowing For Convenient Positioning Of The Pendant And Preventing Pendant From Falling.-ergonomic Pistol Grip For Ease Of Use.*laptop Is Custom Built For Oem And Cannot Be Bought From Hp Commercially. Must Purchase Through Climax To Ensure Form Fit Function With Machinery The Naics Code Is 333517and The Small Business Size Standard Is 500 Employees. This Notice Is Not A Request For Competitive Quotes; However, Any Responsible Source Believing That It Can Fulfill The Requirement May Submit A Capability Statement, Proposal, Or Quotation. Responses To The Pre-solicitation Notice Can Be Submitted Via The Navwar E-commerce Website At Navwar E-commerce Central (navy.mil) By 31 January 2025. Questions Concerning This Notice Should Be Directed To William Faulconer At William.a.faulconer.civ@us.navy.mil. All Responses Received By 31 January 2025 Will Be Considered By The Government For The Purpose Of Determining Whether To Conduct A Competitive Procurement. A Determination By The Government Not To Compete The Proposed Purchase Order Based Upon Responses To This Notice Is Solely Within The Discretion Of The Government.

Details: Description Invitation To Bid For Supply And Delivery Of Ten (10) Pcs. Vehicle Recovery Traction Device 4x4 And One (1) Unit 16 Ft. Closed Van At Provincial Disaster Risk Reduction Management Office, Lingayen, Pangasinan Project Identification No.: Pang-2025-01-0018-g 1. The Provincial Government Of Pangasinan, Through The Local Disaster Risk Reduction Management Fund (pr#2024-12-10206) Intends To Apply The Sum Of Three Million Three Hundred Fourteen Thousand Pesos (p3,314,000.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Supply And Delivery Of Ten (10) Pcs. Vehicle Recovery Traction Device 4x4 And One (1) Unit 16 Ft. Closed Van At Provincial Disaster Risk Reduction Management Office, Lingayen, Pangasinan. Specifications: - Engine: 2.5 Crdi Gl 6m/t; Emission Rating; Euro 4 - Fuel Type: Diesel - Max Output: 91 Kw (124 0 Ps)/ 2,600 Rpm - Max Torque: 354 N-m (36.0 Kg M)/ 1,500 Rpm - Aircon: Dual (front And Back, With At Least 5 Aircon Vents In The Back - Seating Capacity: 16-20 Person With Load Inclusions: - Two(2) Reflectorized Early Warning Device - Complete Set Of Tools (combination Slip-joint Pliers, Vice Grip Plier, Screw Driver, Hydraulic Floor Jack, Gross Tire Disassembly Wrench, Tire Press Gauge, Pressure Gauge, Jumper Cable, Tow-strap) - Two(2) Spare Tires, One (1) Spare Key, Tint, Matting & Seatcover, One (1) Front Dash Cam (crystal Clear 4k Recording Of Full Hd 1080p, At Least 3” Screen, 1700 View Angle Including Accessories I.e Suction Mount (3600 Rotating), 128gb Memory Card, Charger) With Decals Or Sticker Logo, Lto Registration 3 Yrs, Blinker Led Light And Siren, Base Radio With Insurance And Warranty Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Provincial Government Of Pangasinan Now Invites Bids For Supply And Delivery Of Rescue Vehicle. Delivery Of The Goods Is Required Thirty (30) Calendar Days. Bidders Should Have Completed From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instruction To Bidders. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulation (irr) Of Republic Act (ra) 9184), Otherwise Known As The “government Procurement Reform Act” Bidding Is Restricted To Filipino Citizen/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60% Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183. 4. Interested Bidders May Obtain Further Information From Provincial Government Of Pangasinan Thru The Bids And Awards Committee (bac) Office And Inspect The Bidding Documents At The Address Given Below During Bidders January 14, 2025 – February 5, 2025; 8:00 Am To 5:00pm And February 6, 2025; 8:00 Am To 10:00am. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested January 14, 2025 – February 5, 2025; 8:00 Am To 5:00pm And February 6, 2025; 8:00 Am To 10:00am And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Four Thousand Pesos (p4,000.00). It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps) And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 6. The Provincial Government Of Pangasinan Will Hold A Pre-bid Conference On January 23, 2025; 10:00 Am At Conference Room, 2nd Floor Malong Building, Capitol Compound, Lingayen, Pangasinan, Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat At The Address Below On Or Before February 6, 2025; 10:00am. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 18. Bid Opening Shall Be On February 6, 2025; 10:00am At Conference Room, 2nd Floor, Malong Building, Capitol Compound, Lingayen, Pangasinan. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. Late Bids Shall Not Be Accepted. 8. The Provincial Government Of Pangasinan Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 9. For Further Information, Please Refer To: Melicio F. Patague Ii Provincial Administrator Bac Chairman Provincial Administrator Capitol Building, Capitol Compound Lingayen, Pangasinan Marlon C. Operaña Provincial Accountant Bac Technical Working Group Provincial Accountant Finance Building, Capitol Compound Lingayen, Pangasinan Rhodyn Luchinvar O. Oro Pdrrm Officer Bac Secretariat Bac Office 2nd Floor Malong Building, Capitol Compound Lingayen, Pangasinan 075 6327840 _________________________ Melicio F. Patague Ii Provincial Administrator Bac Chairman

Details: Description Republic Of The Philippines Province Of Cebu Bids And Awards Committee - Goods And Services Cebu Capitol, Cebu City Mode Of Procurement : Negotiated 53.9 Control No. 25-01-033 Dated : January 22, 2025 Note: Please Attached Latest & Not Expired Bac Certificate Of P. R. No. 25-01-0044 Dated : January 21, 2025 Registration & Omnibus Sworn Statement For Abc Worth O.r. No. 100-25-01-278 Dated : Of 500k & Above. Abc: P120,000.00 Gentlemen: Please Quote Your Prices On The Following Listed Articles Which The Province Of Cebu Desires To Buy If To The Government. For Clarification & Inquiry Call Telefax Nos. 888-2328 Local 1228 - 1229, Fax #: 1229 Or Email Us At Bacgscapitol02@gmail.com. ♥ Prices Quoted Should Be Vat Inclusive And Subject To Withholding Tax. ♥ Philgeps Registration Number: ______________________ ♥ Price Quoted Valid Until: ______________________ ♥ Terms Of Payment: _________________________ ♥ Delivery Date: 15cd Upon Receipt Of Purchase Order. Bids And Awards Committee ♥ Deadline Of Quotation: _______________________ ♥ Tin No.: ______________________________________________________________ (sgd) ♥ Place Of Delivery: Onsite Hector P. Jamora ♥ Note: Must Have A Satellite Office/service Center In Cebu (for Supplier Outside Cebu). Bac-gs Chairman ♥ Please Submit Certified True Copy Of Business/mayor's Permit. Item Quantity Unit Articles And Description Brand Offer Unit Cost Total Price 1 1 Unit Industrial Fan, Large Ceiling Type, W/ Inst. *7.32 Meters In Diameter *1.5 Kilowatts, 220-volts, * 60hz. Frequency Single Phase *covering Area 1200 M2 *cooling-425,000 Cfm/1500 Watts *speed- 50 Rpm *no. Of Blades-5 Or 6 Airfoil/op *max. Noise Level - 60 Db *weight -+ / - 156kg *3-years Warrantly For Spare Parts And Labor *including Of Electrical Wirings And Supply/materials Including Panel Control Protection "metal Enclosure", And Incidental Services In The Special Condition Of The Contract *mounting Heigh Of Control Panel Must Be 1.8m From The Ground. *motor Name/ Specification Must Be Engraved In Metal Plate / Sheet >the Base/suspension Rod Of The Industrial Fan Should Only Be Anchored/ Connected To Main/full Truss. >connection Guide Set By The Supplier Should Be Followed During Installation >use High-strength Alloy Steel Bolts And Anti-skid Nuts. >provide Tension Rods/steel Wire Cables With Turn-buckle As Additional Supports In Order To Resist Buckling Moment And Ensure Safety/stability. Anchor These To The Main Truss Or Middle Rigid Strut Only. >adjust Electrical Lighting Fixtures That Will Obstruct The Rotating Blades Of The Industrial Fan. The Contractor Must Have An Actual Inspection To Countercheck The Truss Vertical/pitch Clearance With Respect To The Industrial Fan’s Suspension Rod Designed Length That Should Be Safe. >observe Sufficient & Safe Spacing Of 2-units Industrial Fan Or More That Have Been Scheduled To Specific Covered Courts. >provide Sufficient Scaffoldings / Stage During Installation Progress For Safety Purposes. Purpose: ***for The Installation Of Industrial Fan In Barangay Antipolo, Medellin (sp Singco)**** Canvassed By ____________________ Signature Of Bidder Or His/her Representative Over Printed Name Please Label Your Envelope. Sign Your Quotation And State The Brand Of The Articles Quoted.

Details: Nasa’s Technology Transfer Program Solicits Inquiries From Companies Interested In Obtaining License Rights To Commercialize, Manufacture And Market The Following Technology. License Rights May Be Issued On An Exclusive Or Nonexclusive Basis And May Include Specific Fields Of Use.nasa Provides No Funding In Conjunction With These Potential Licenses. the Technology: nasa Langley Research Center's Electric Field Imaging (efi) System Is The Only Noncontact Method Capable Of Quantitatively Measuring The Magnitude And Direction Of Electrostatic Fields In Near- And Far-field Applications. Based On Low-cost, Commercially Available Components, The Efi System Uses Measurement Of Very Low-current, Human-safe Electric Fields To Construct A Three-dimensional Image Of Objects And People Based On Their Dielectric Properties. This Platform Technology, Originally Developed For Measurement Of The Efficacy Of Electrical Shielding Around Cables, Could Be Optimized For A Variety Of Applications, Including Medical Imaging, Security And Detection, Weather And Natural Disaster Prediction, And Nondestructive Evaluation Of Composites And Insulators. The Efi System Has The Potential To Offer A Lower-cost, Portable, And Safer Alternative To The Imaging Systems Currently Used In These Applications. the Efi Imaging Platform Consists Of A Sensor Array, Processing Equipment, And An Output Device. By Registering Voltage Differences At Multiple Points Within The Sensor Array, The Efi System Can Calculate The Electrical Potential At Points Removed From The Sensor. Using Techniques Similar To Computed Tomography, The Electrical Potential Data Can Be Assembled Into A Three-dimension Map Of The Magnitude And Direction Of Electric Fields. Since Objects Interact With Electric Fields Differently Based On Their Shape And Dielectric Properties, This Electric Field Data Can Then Be Used To Understand Shape, Internal Structure, And Dielectric Properties (e.g., Impedance, Resistance) Of Objects In Three Dimensions. The Efi Sensor Can Be Used On Its Own To See Electric Fields Or Image Electric Fieldemitting Objects Near The Sensor (e.g., To Evaluate Leakage From Poorly Shielded Wires Or Casings). For Evaluation Of Objects That Do Not Produce An Electric Field, Nasa Has Developed Generator That Emits A Low-current, Human-safe Electrostatic Field For Snapshot Evaluation Of Objects. Additionally, An Alternative Efi System Optimized To Evaluate Electric Fields At Significant Distances (greater Than 1 Mile) Is Being Developed For Weather-related Applications. to Express Interest In This Opportunity, Please Submit A License Application Through Nasa’s Automated Technology Licensing Application System (atlas) By Visitinghttps://technology.nasa.gov/patent/lar-tops-116 if You Have Any Questions, Please E-mail Nasa’s Technology Transfer Program Atagency-patent-licensing@mail.nasa.govwith The Title Of This Technology Transfer Opportunity As Listed In This Sam.gov Notice And Your Preferred Contact Information. For More Information About Licensing Other Nasa-developed Technologies, Please Visit The Nasa Technology Transfer Portal Athttps://technology.nasa.gov/ these Responses Are Provided To Members Of Nasa’s Technology Transfer Program For The Purpose Of Promoting Public Awareness Of Nasa-developed Technology Products, And Conducting Preliminary Market Research To Determine Public Interest In And Potential For Future Licensing Opportunities.no Follow-on Procurement Is Expected To Result From Responses To This Notice.

Details: This Is A Sources Sought Notice Only. It Is Neither A Solicitation Nor A Request For Quote (rfq) And It Does Not Obligate The Government To Award A Contract. Request For Solicitation Will Not Receive A Response. The Government Will Not Pay Nor Reimburse Any Costs Of Preparing This Response. The Source S Sought Notice Is For Market Research Purposes To Make The Appropriate Acquisition Decision And Gain Knowledge Of Potential Qualified Businesses And Their Small Business Administration (sba) Size Classification In Relation To North America Industry Classification System (naics) 334310, Audio And Video Equipment Manufacturing, Size Standard Of 750 Employees. The Federal Supply Code (fsc) Is 5836. the Network Contracting Office (nco) 8, Orlando Va Medical Center (ovamc) Is Seeking To Identify Qualified, Experienced, And Interested Contractors Who Can Design, Assess, Procure, Assemble, Install, Integrate, Test, And Remove Obsolete Cables And Equipment To Replace/upgrade The Existing Tv Studio Equipment And Library Management System To Include An Led Curved Video Wall Installed And The Studio Walls Need To Be Soundproofed To Enable Proper Video And Sound Production Without Any Outside Sound Interferences. The Contractor Will Provide All Labor, Materials, Transportation, And Equipment Required To Complete The Design And Installation, Which Includes An Hd/uhd/4k Television Studio With An Industrial-level Digital Media Asset Management Solution(s), Suitable For Hd/uhd/4k Video And Will Also Update The Library Management System To Provide More Storage. the Capability Statement Shall Be Limited To No More Than Five Pages And Must Clearly State The Following: Capability In Industry To Replace/upgrade The Existing Tv Studio Equipment And Library Management System. Offerors Who Cannot Provide Historical Information For Their Company Regarding The Requirements Outlined Above Or Similar Scope And Scale Should Provide Corresponding Information To Show How The Company Would Meet Ovamc Requirements. This Information Should Provide A Strong Level Of Confidence To The Government That An Offeror Would Meet Or Exceed The Performance Requirements To Provide All The Requirements To Replace/upgrade The Existing Tv Studio Equipment And Library Management System. in Addition, Provide And Answer The Following: company Name, Address, Point(s) Of Contact, Title, Telephone Number, Fax Number, Email Address, Cage Code, And Sam Uei Number. company S Business Size, To Include Number Of Employees; company S Socioeconomic Status there Is No Solicitation At This Time. This Request For Capability Information Does Not Constitute A Request For Proposal (rfq); Submission Of Any Information In Response To This Market Survey Is Purely Voluntary; The Government Assumes No Financial Responsibility For Any Costs Incurred. to Be Eligible For Award, Prospective Must Be Registered In The System For Award Management (sam) Interest Site, Www.sam.gov. responses To This Notice Should Be Emailed, No Later Than 1300 Hours (1:00 Pm), Eastern Standard Time On February 4, 2025. telephone And Facsimile Responses Will Not Be Considered. please Email: Benjamin M. Amato At Benjamin.amato@va.gov. When Responding Via Email Ensure The Subject Line Is Titled With Rfi# 36c24825q0310 Fy25: Television Studio And Library Management System. no Other Information Is Available At This Time And Questions Will Not Be Entertained. We Thank You For Your Interest And Time To The Prepare And Submit A Response.

Details: Description Republic Of The Philippines Province Of Cebu Bids And Awards Committee - Goods And Services Cebu Capitol, Cebu City Mode Of Procurement : Negotiated 53.9 Control No. 25-01-029 Dated : January 16, 2025 Note: Please Attached Latest & Not Expired Bac Certificate Of P. R. No. 25-01-0040 Dated : January 16, 2025 Registration & Omnibus Sworn Statement For Abc Worth O.r. No. 100-25-01-291 Dated : Of 500k & Above. Abc: P720,000.00 Gentlemen: Please Quote Your Prices On The Following Listed Articles Which The Province Of Cebu Desires To Buy If To The Government. For Clarification & Inquiry Call Telefax Nos. 888-2328 Local 1228 - 1229, Fax #: 1229 Or Email Us At Bacgscapitol02@gmail.com. ♥ Prices Quoted Should Be Vat Inclusive And Subject To Withholding Tax. ♥ Philgeps Registration Number: ______________________ ♥ Price Quoted Valid Until: ______________________ ♥ Terms Of Payment: _________________________ ♥ Delivery Date: 15cd Upon Receipt Of Purchase Order. Bids And Awards Committee ♥ Deadline Of Quotation: _______________________ ♥ Tin No.: ______________________________________________________________ (sgd) ♥ Place Of Delivery: Onsite Hector P. Jamora ♥ Note: Must Have A Satellite Office/service Center In Cebu (for Supplier Outside Cebu). Bac-gs Chairman ♥ Please Submit Certified True Copy Of Business/mayor's Permit. Item Quantity Unit Articles And Description Brand Offer Unit Cost Total Price 1 6 Units Industrial Fan, Large Ceiling Type, W/ Inst. *7.32 Meters In Diameter *1.5 Kilowatts, 220-volts, * 60hz. Frequency Single Phase *covering Area 1200 M2 *cooling-425,000 Cfm/1500 Watts *speed- 50 Rpm *no. Of Blades-5 Or 6 Airfoil/op *max. Noise Level - 60 Db *weight -+ / - 156kg *3-years Warrantly For Spare Parts And Labor *including Of Electrical Wirings And Supply/materials Including Panel Control Protection "metal Enclosure", And Incidental Services In The Special Condition Of The Contract *mounting Heigh Of Control Panel Must Be 1.8m From The Ground. *motor Name/ Specification Must Be Engraved In Metal Plate / Sheet >the Base/suspension Rod Of The Industrial Fan Should Only Be Anchored/ Connected To Main/full Truss. >connection Guide Set By The Supplier Should Be Followed During Installation >use High-strength Alloy Steel Bolts And Anti-skid Nuts. >provide Tension Rods/steel Wire Cables With Turn-buckle As Additional Supports In Order To Resist Buckling Moment And Ensure Safety/stability. Anchor These To The Main Truss Or Middle Rigid Strut Only. >adjust Electrical Lighting Fixtures That Will Obstruct The Rotating Blades Of The Industrial Fan. The Contractor Must Have An Actual Inspection To Countercheck The Truss Vertical/pitch Clearance With Respect To The Industrial Fan’s Suspension Rod Designed Length That Should Be Safe. >observe Sufficient & Safe Spacing Of 2-units Industrial Fan Or More That Have Been Scheduled To Specific Covered Courts. >provide Sufficient Scaffoldings / Stage During Installation Progress For Safety Purposes. Purpose: ***for The Installation Of Industrial Fan In Barangays Of Bato, Talavera,bunga Captain Claudio, And General Climaco In The Municipality Of Toledo (sp Pepito)*** Canvassed By ____________________ Signature Of Bidder Or His/her Representative Over Printed Name Please Label Your Envelope. Sign Your Quotation And State The Brand Of The Articles Quoted.

Details: Description Republic Of The Philippines Province Of Cebu Bids And Awards Committee - Goods And Services Cebu Capitol, Cebu City Mode Of Procurement : Negotiated 53.9 Control No. 25-01-032 Dated : January 22, 2025 Note: Please Attached Latest & Not Expired Bac Certificate Of P. R. No. 25-01-0043 Dated : January 21, 2025 Registration & Omnibus Sworn Statement For Abc Worth O.r. No. 100-25-01-287 Dated : Of 500k & Above. Abc: P720,000.00 Gentlemen: Please Quote Your Prices On The Following Listed Articles Which The Province Of Cebu Desires To Buy If To The Government. For Clarification & Inquiry Call Telefax Nos. 888-2328 Local 1228 - 1229, Fax #: 1229 Or Email Us At Bacgscapitol02@gmail.com. ♥ Prices Quoted Should Be Vat Inclusive And Subject To Withholding Tax. ♥ Philgeps Registration Number: ______________________ ♥ Price Quoted Valid Until: ______________________ ♥ Terms Of Payment: _________________________ ♥ Delivery Date: 15cd Upon Receipt Of Purchase Order. Bids And Awards Committee ♥ Deadline Of Quotation: _______________________ ♥ Tin No.: ______________________________________________________________ (sgd) ♥ Place Of Delivery: Onsite Hector P. Jamora ♥ Note: Must Have A Satellite Office/service Center In Cebu (for Supplier Outside Cebu). Bac-gs Chairman ♥ Please Submit Certified True Copy Of Business/mayor's Permit. Item Quantity Unit Articles And Description Brand Offer Unit Cost Total Price 1 6 Units Industrial Fan, Large Ceiling Type, W/ Inst. *7.32 Meters In Diameter *1.5 Kilowatts, 220-volts, * 60hz. Frequency Single Phase *covering Area 1200 M2 *cooling-425,000 Cfm/1500 Watts *speed- 50 Rpm *no. Of Blades-5 Or 6 Airfoil/op *max. Noise Level - 60 Db *weight -+ / - 156kg *3-years Warrantly For Spare Parts And Labor *including Of Electrical Wirings And Supply/materials Including Panel Control Protection "metal Enclosure", And Incidental Services In The Special Condition Of The Contract *mounting Heigh Of Control Panel Must Be 1.8m From The Ground. *motor Name/ Specification Must Be Engraved In Metal Plate / Sheet >the Base/suspension Rod Of The Industrial Fan Should Only Be Anchored/ Connected To Main/full Truss. >connection Guide Set By The Supplier Should Be Followed During Installation >use High-strength Alloy Steel Bolts And Anti-skid Nuts. >provide Tension Rods/steel Wire Cables With Turn-buckle As Additional Supports In Order To Resist Buckling Moment And Ensure Safety/stability. Anchor These To The Main Truss Or Middle Rigid Strut Only. >adjust Electrical Lighting Fixtures That Will Obstruct The Rotating Blades Of The Industrial Fan. The Contractor Must Have An Actual Inspection To Countercheck The Truss Vertical/pitch Clearance With Respect To The Industrial Fan’s Suspension Rod Designed Length That Should Be Safe. >observe Sufficient & Safe Spacing Of 2-units Industrial Fan Or More That Have Been Scheduled To Specific Covered Courts. >provide Sufficient Scaffoldings / Stage During Installation Progress For Safety Purposes. Purpose: ***for The Installation Of Industrial Fan In Barangays Of Tominjao, Agujo, Talisay, Poblacion,and Lanao In The Municipality Of Daanbantayan And In Barangay Of Luy-a In The Municipality Of Medellin Canvassed By ____________________ Signature Of Bidder Or His/her Representative Over Printed Name Please Label Your Envelope. Sign Your Quotation And State The Brand Of The Articles Quoted.

Details: Description Republic Of The Philippines Province Of Zambales Municipality Of Palauig -0- Bids And Awards Committee Invitation To Apply For Eligibility And To Bid Itb No. Palg 01-2025 (goods) The Local Government Of Palauig Thru Its Bids And Awards Committee (bac) Invites Suppliers, Manufacturers, Distributors Duly Registered To Apply For Eligibility And If Found Eligible, To Bid For The Hereunder Contract: Name Of Project: Digitalization Of Payments For Collections And Disbursements Location : Palauig, Zambales Approved Budget For The Contract . . . . . . . . . . . Php10,000,000.00 Source Of Fund: Trust Fund (lgsf-fa) Delivery Period: Two Hundred Calendar Days (upon Receipt Of Notice To Proceed) Item No. Unit Qty. Item Description Unit Cost Total Cost 1. Package 1 Collections And Disbursements Softwares (including Customization, Implementation And Initial Support) 2. Unit 11 Desktop Computer ( Specs: Intel I7, 1tb Ssd,16gb Ram) 3. Unit 20 3-in-1 Printer 4. Unit 13 Uninterruptible Power Supply (ups) 5 Unit 10 Laptop (specs: Intel I7, 1tb Ssd,, 16gb Ram) 6. Unit 5 Dot Matrix Printers 7. Unit 3 Biometrics 8. Unit 1 Production Server 9. Unit 1 Data Switch 10. Unit 1 Server Cabinet 11. Set 1 Data Cables Total Project Cost Prospective Bidder Should Have Experience In Undertaking A Similar Project Within The Last Three (3) Years With An Amount Of At Least 50% Of The Proposed Project For Bidding. The Eligibility Check/screening As Well As The Preliminary Examination Of Bids Shall Use Non-discretionary “pass/fail” Criteria. Post-qualification Of The Lowest Calculated Bid Shall Be Conducted. All Particulars Relative To Eligibility Statement And Screening, Bid Security, Performance Security, Pre-bidding Conference(s), Evaluation Of Bids, Post-qualification And Award Of Contract Shall Be Governed By The Pertinent Provisions Of R.a. 9184 And Its Implementing Rules And Regulation (irr). The Complete Schedule Of Activities Is Listed, As Follows: 1. Issuance Of Bid Documents - January 15, 2025 2. Pre-bid Conference - January 22, 2025 (2:00 P.m.) 2. Deadline Of Submission Of Bid Proposal - February 03, 2025 (11:30 A.m.) 4. Opening Of Bids - February 03, 2025 (2:00 P.m.) 5. Bid Evaluation - February 04-05, 2025 6. Post-qualification - February 06-07, 2025 7. Notice Of Award - February 10, 2025 Bidding Documents May Be Obtained At The Bac Secretariat, Palauig, Zambales Upon Payment Of Non-refundable Fee Of Php 10,000.00 To The Municipal Treasurer’s Office. Duly Accomplished Eligibility Forms Shall Be Submitted In Sealed Envelope Address To The Bac Chairperson. The Bac Reserves The Right To Accept Or Reject All Bids Or Part Thereof, To Waive Formality Therein Or To Accept Such Bids Or To Award Of Any That Is Considered Advantageous To The Local Government Unit Of Palauig, Zambales. For Further Inquiry, You May Refer To: Ms. Daisy D. Bautista Head, Palauig Bac Secretariat 2nd Floor, Municipal Building Palauig, Zambales Cp No. 09094876435 By: Bids And Awards Committee – Goods (sgd.) Adrian Ariel C. Altares Oic- Municipal Engineer Bac Chairperson

Details: Installation of an emergency power feed point for a mobile generator with an output of around 80 kW in the courtyard of the elementary school. The school building can be supplied by the generator in the event of a power failure via a new cable that is to be laid and acts on a switching device. The mobile generator enables the entire school (daycare center/gymnasium) to be supplied only in isolated operation. The emergency power feed is not suitable for parallel operation. Various outdoor work is necessary to create the cable trench. This includes the dismantling and rebuilding of paths, roads and paved areas. An earthing point in the form of a deep earth rod is planned at the generator's feed point.