Bus Tenders

Details: Nsn 7r-4320-014552564-qe, Tdp Ver 001, Qty 124 Ea, Delivery Fob Origin. This Part Requires Engineering Source Approval By The Design Control Activity In Order To Maintain The Quality Of The Part. Existing Unique Design Capability, Engineering Skills, And Manufacturing/repair Knowledge By The Qualified Source(s) Require Acquisition/repair Of The Part From The Approved Source(s). The Approved Source(s) Retain Data Rights,manufacturing/repair Knowledge, Or Technical Data That Are Not Economically Available To The Government, And The Data Or Knowledge Is Essential To Maintaining The Quality Of The Part. An Alternate Source Must Qualify In Accordance With The Design Control Activity's Procedures, As Approved By The Cognizant Government Engineering Activity. The Qualification Procedures Must Be Approved By The Government Engineering Activity Having Jurisdiction Over The Part In The Intended Application. The Subject Item Requires Government Source Approval Prior To Contract Award, As The Item Is Flight Critical And/or The Technical Data Available Has Not Been Determined Adequate To Support Acquisition Via Full And Open Competition. Only The Source(s) Previously Approved By The Government For This Item Have Been Solicited. The Time Required For Approval Of A New Source Is Normally Such That An Award Cannot Be Delayed Pending Approval Of A New Source. If You Are Not An Approved Source You Must Submit, Together With Your Proposal, The Information Detailed In One Of The Navsup Weapon Systems Support (navsup Wss) Source Approval Information Brochures Listed Below. Spares: Https://www.navsup.navy.mil/navsup-enterprise/navsup-weapon-systems-sup Port/business-opps/ Repair: Https://www.navsup.navy.mil/navsup-enterprise/navsup -weapon-systems-support/business-opps/ Technical Data Required To Be Submitted Based On Your Company's Experience In Production Of The Same Or Similar Item, Or If This Is An Item You Have Never Made. If Your Request For Source Approval Is Currently Being Evaluated At Navsup Wss Submit With Your Offer A Copy Of The Cover Letter Which Forwarded Your Request For Source Approval. Offers Received Which Fail To Provide All Data Required By The Source Approval Brochure Or Document Previous Submission Of All Data Required By The Source Approval Brochure Will Not Be Considered For Award Under This Solicitation. Please Note, If Evaluation Of A Source Approval Request Submitted Hereunder Cannot Be Processed In Time And/or Approval Requirements Preclude The Ability To Obtain Subject Items In Time To Meet Government Requirements, Award Of The Subject Requirement May Continue Based On Fleet Support Needs. The Navsup Wss Commercial Item Identification Brochure Is Now Available At: "https://www.navsup.navy.mil/navsup-enterprise/navsup-weapon-systems-support/bus Iness-opps/" Interested Parties May Obtain Copies Of Military And Federal Specificationsand Standards, Qualified Products Lists (qpls), Qualified Product Databases(qpds), Military Handbooks, And Other Standardized Documents From The Dodsingle Stock Point (dodssp) At Document Automation And Production Service(daps) In Philadelphia, Pa. Note: Patterns, Drawings, Deviation Lists, Purchase Descriptions, Etc. Are Not Stocked At Dodssp. Most Documents Are Available In Adobe Pdf Format From Assist-online At: Http://quicksearch.dla.mil/. Users May Use Assist-quick Search To Search For And Download Available Documents Directly Using Standard Browser Software. Documents That Are Not Available For Downloading From Assist-quick Search Can Be Ordered From The Dodssp Website Using The Assist Shopping Wizard After Obtaining A Dodssp Customer Account By Following The Registration Procedures. Users Who Do Not Have Access To The Internet May Contact The Dodssp Assisthelp Desk At 215-697-2667 Or 215-697-2179 (dsn: 442-2667), Or Mail Their Request To Dladocument Services, Bldg. 4/d, 700 Robbins Avenue, Philadelphia Pa 19111-5094. The Proposed Contract Action Is For Supplies Or Services For Which The Government Intends To Solicit And Negotiate With Only One Source Under The Authority Of Far 6.302-1. All Responsible Sources May Identify Their Interest And Capability To Respond To The Requirement Or Submit Proposals, Quotationsor Capability Statements. This Notice Of Intent Is Not A Request Forcompetitive Proposals. However, All Proposals Received Within 45 Days (30days If Award Is Issued Under An Existing Basic Ordering Agreement (boa) Afterdate Of Publication Of This Synopsis Will Be Considered By The Government. A Determination By The Government Not To Compete With This Proposed Contract Based Upon Responses To This Notice Is Solely Within The Discretion Of The Government. Information Received Will Normally Be Considered Solely For The Purpose Of Determining Whether To Conduct A Competitive Procurement. Award Will Be Made Only If The Offeror, The Product/service, Or The Manufacturer Meets The Qualification Requirement(s) At Time Of Award, In Accordance With Far Clause 52.209-1. The Solicitation Identifies The Office Where Additional Information Can Be Obtained Concerning Qualification Requirements And Is Cited In Each Individual Solicitation. Based Upon Market Research, The Government Is Not Using The Policies Contained In Far Part 12, Acquisition Of Commercial Items, In Its Solicitation For The Described Supplies Or Services. However, Interested Persons May Identify Tothe Contracting Officer Their Interest And Capability To Satisfy Thegovernment's Requirement With A Commercial Item Within 15 Days Of This Notice.

Details: Synopsis: This Sources Sought Announcement Is To Assist The U.s. Army Combat Capabilities Development Command - Soldier Center (devcom-sc) To Identify Potential Sources To Manage The Joint Aerial Delivery Demonstration & Exhibition (jadde) To Be Conducted In November 4-6, 2025 In Yuma, Az. the U.s. Government Requests That Responses Be Submitted Electronically To Allison Griffin (allison.k.griffin4.civ@army.mil) And Brian Bagdonovich (brian.p.bagdonovich.civ@army.mil) No Later Than 21 January 2025, 5 Pm.est. description: Devcom-sc Is Conducting An International Aerial Delivery Demonstration & Exhibition In Yuma, Az November 2025. Approximately 300 Us And International Participants Are Anticipated. the Government Desires A Contractor To Manage Registration And Collect Fees. This Will Require The Establishment Of A Secure Website To Advertise The Event, Collect Registration Information, And Potentially Fees As Well. The Contractor May Be Directed By The Government To Use Those Funds To Pay For Costs Related To The Event Such As: 1. Three Days Of Coach Bus Transportation From Hotels In Yuma Az To The Drop Zone On Yuma Proving Ground And Return In The Afternoon. 2. Food And Water For Participants For Three Days On The Dropzone. 3. Large Area Commercial Tents To Provide Protection From The Elements. 4. Tables And Chairs For Under The Tent. 5. Bleachers For Participants To Sit On Outside. 6. Toilets Facilities. 7. Other Expenses Not Yet Defined As It Pertains To The Administration Of The Event deliverables: all Documentation Submitted Shall Be Submitted As Ms Word, Adobe Pdf, Ms Powerpoint, Visio, Or Ms Excel Files. 1. Respondents: The White Paper Should Be Written In Respondent Format, Double Spaced, And Minimum Font Size Of 10 Pt. Paper Should Not Exceed 12 Pages, Including Cover. a. This Paper Should Cover Company Information (company Name, Cage Code, Mailing Address, And Primary Point Of Contact Information (to Include Telephone Number And Email Address). b. The Paper Should Cover The 5 Ws, As Applicable. (e.g., What, Where, When, Why And Who. Example Focus Areas: i. Please Discuss Any/all Relevant Current Products And Services That Currently Meet Or Will Be Able To Meet The Enclosed Requirements. ii. Vendors Are Encouraged To Propose Alternative Products That May Be Able To Meet Or Exceed The Requirements. iii. As Applicable, Please Discuss How Your Product(s) Was Implemented Within Industry/government. c. Please Discuss, As Applicable, Proposed Hardware Used As Part Of The Solution. d. For Foreign Companies: Discuss How The Proposer Will Be Able To Work With The Us Government In The Future (i.e., Us Subsidiary Or Partner) If Required. e. Additional Documentation Accepted (and Not Included In The Page Count For The White Paper) Includes, But Is Not Limited To, The Following: Powerpoint Presentations, Training Documentation, Product Specification Sheets, User Handbook/guides, Pictures, Link To Demonstrations, Test Data, Etc. 2. Test, Certification And Accreditation (c&a) Documentation: vendors Are Requested To Provide Any Supporting Documentation Illustrating Safety Certification, Government Approval, Test Data, Etc. 3. Cost. interested Parties Are Invited To Submit A Response To This Sources Sought Announcement. This Is A Sources Sought Announcement Only this Sources Sought Announcement Is Issued Solely For Information And Planning Purposes And To Identify Interested Sources. This Is Not A Solicitation. No Contract Will Be Awarded From This Announcement. This Sources Sought Does Not Constitute A Request For Proposal (rfp) Or A Promise To Issue An Rfp In The Future. It Is Subject To Change And Is Not Binding On The Government. Further, Unsolicited Proposals Will Not Be Accepted. Funding Is Not Available At This Time. The United States Army Has Not Made A Commitment To Procure Any Of The Items/services Discussed, And Release Of This Sources Sought Announcement Should Not Be Construed As Such A Commitment Or As Authorization To Incur Cost For Which Reimbursement Would Be Required Or Sought. Response To This Sources Sought Announcement Is Voluntary And No Reimbursement Will Be Made For Any Costs Associated With Providing Information In Response To This And Any Follow-on Information Requests. All Submissions Become Government Property And Will Not Be Returned. not Responding To This Sources Sought Announcement Does Not Preclude Participation In Any Future Rfp If Any Is Issued. If A Solicitation Is Released, It Will Be Synopsized On The Sam.gov Website. It Is The Responsibility Of The Potential Responders To Monitor This Site For Additional Information Pertaining To This Subject. responses: interested Parties May Identify Their Interest And Capability By Sending Responses Regarding This Requirement To Devcom-sc Via E-mail Only To Allison.k.griffin4.civ@army.mil And To Brian.p.bagdonovich.civ@army.mil No Later Than 21 January 2025, 5:00 Pm. The U.s. Government Will Not Pay For Any Information Or Administrative Cost Incurred In Response To This Notice. All Costs Associated With Responding To This Notice Will Be Solely At The Expense Of The Interested Party. please Provide Business Size (indicate Your Socioeconomic Status), Applicable Naics Code, And Cage Code. If You Hold A Gsa Federal Supply Schedule Contract, Please Identify Your Contract Number. questions: any Questions For Clarification May Be Emailed To Allison.k.griffin4.civ@army.mil And Brian.p.bagdonovich.civ@army.mil No Later Than 14 January 2025, 5:00 Pm Est. Verbal Questions Will Not Be Accepted. Questions Shall Not Contain Proprietary Or Classified Information. An Unattributed List Of Questions And Answers Will Be Published At The Same Web Location Of This Sources Sought Announcement.

Details: Nsn 7r-4810-013539209-gf, Tdp Ver 008, Qty 324 Ea, Delivery Fob Origin. This Part Requires Engineering Source Approval By The Design Control Activity In Order To Maintain The Quality Of The Part. Existing Unique Design Capability, Engineering Skills, And Manufacturing/repair Knowledge By The Qualified Source(s) Require Acquisition/repair Of The Part From The Approved Source(s). The Approved Source(s) Retain Data Rights,manufacturing/repair Knowledge, Or Technical Data That Are Not Economically Available To The Government, And The Data Or Knowledge Is Essential To Maintaining The Quality Of The Part. An Alternate Source Must Qualify In Accordance With The Design Control Activity's Procedures, As Approved By The Cognizant Government Engineering Activity. The Qualification Procedures Must Be Approved By The Government Engineering Activity Having Jurisdiction Over The Part In The Intended Application. The Subject Item Requires Government Source Approval Prior To Contract Award, As The Item Is Flight Critical And/or The Technical Data Available Has Not Been Determined Adequate To Support Acquisition Via Full And Open Competition. Only The Source(s) Previously Approved By The Government For This Item Have Been Solicited. The Time Required For Approval Of A New Source Is Normally Such That An Award Cannot Be Delayed Pending Approval Of A New Source. If You Are Not An Approved Source You Must Submit, Together With Your Proposal, The Information Detailed In One Of The Navsup Weapon Systems Support (navsup Wss) Source Approval Information Brochures Listed Below. Spares: Https://www.navsup.navy.mil/navsup-enterprise/navsup-weapon-systems-sup Port/business-opps/ Repair: Https://www.navsup.navy.mil/navsup-enterprise/navsup -weapon-systems-support/business-opps/ Technical Data Required To Be Submitted Based On Your Company's Experience In Production Of The Same Or Similar Item, Or If This Is An Item You Have Never Made. If Your Request For Source Approval Is Currently Being Evaluated At Navsup Wss Submit With Your Offer A Copy Of The Cover Letter Which Forwarded Your Request For Source Approval. Offers Received Which Fail To Provide All Data Required By The Source Approval Brochure Or Document Previous Submission Of All Data Required By The Source Approval Brochure Will Not Be Considered For Award Under This Solicitation. Please Note, If Evaluation Of A Source Approval Request Submitted Hereunder Cannot Be Processed In Time And/or Approval Requirements Preclude The Ability To Obtain Subject Items In Time To Meet Government Requirements, Award Of The Subject Requirement May Continue Based On Fleet Support Needs. The Navsup Wss Commercial Item Identification Brochure Is Now Available At: "https://www.navsup.navy.mil/navsup-enterprise/navsup-weapon-systems-support/bus Iness-opps/" Interested Parties May Obtain Copies Of Military And Federal Specificationsand Standards, Qualified Products Lists (qpls), Qualified Product Databases(qpds), Military Handbooks, And Other Standardized Documents From The Dodsingle Stock Point (dodssp) At Document Automation And Production Service(daps) In Philadelphia, Pa. Note: Patterns, Drawings, Deviation Lists, Purchase Descriptions, Etc. Are Not Stocked At Dodssp. Most Documents Are Available In Adobe Pdf Format From Assist-online At: Http://quicksearch.dla.mil/. Users May Use Assist-quick Search To Search For And Download Available Documents Directly Using Standard Browser Software. Documents That Are Not Available For Downloading From Assist-quick Search Can Be Ordered From The Dodssp Website Using The Assist Shopping Wizard After Obtaining A Dodssp Customer Account By Following The Registration Procedures. Users Who Do Not Have Access To The Internet May Contact The Dodssp Assisthelp Desk At 215-697-2667 Or 215-697-2179 (dsn: 442-2667), Or Mail Their Request To Dladocument Services, Bldg. 4/d, 700 Robbins Avenue, Philadelphia Pa 19111-5094. The Proposed Contract Action Is For Supplies Or Services For Which The Government Intends To Solicit And Negotiate With Only One Source Under The Authority Of Far 6.302-1. All Responsible Sources May Identify Their Interest And Capability To Respond To The Requirement Or Submit Proposals, Quotationsor Capability Statements. This Notice Of Intent Is Not A Request Forcompetitive Proposals. However, All Proposals Received Within 45 Days (30days If Award Is Issued Under An Existing Basic Ordering Agreement (boa) Afterdate Of Publication Of This Synopsis Will Be Considered By The Government. A Determination By The Government Not To Compete With This Proposed Contract Based Upon Responses To This Notice Is Solely Within The Discretion Of The Government. Information Received Will Normally Be Considered Solely For The Purpose Of Determining Whether To Conduct A Competitive Procurement. Award Will Be Made Only If The Offeror, The Product/service, Or The Manufacturer Meets The Qualification Requirement(s) At Time Of Award, In Accordance With Far Clause 52.209-1. The Solicitation Identifies The Office Where Additional Information Can Be Obtained Concerning Qualification Requirements And Is Cited In Each Individual Solicitation. Based Upon Market Research, The Government Is Not Using The Policies Contained In Far Part 12, Acquisition Of Commercial Items, In Its Solicitation For The Described Supplies Or Services. However, Interested Persons May Identify Tothe Contracting Officer Their Interest And Capability To Satisfy Thegovernment's Requirement With A Commercial Item Within 15 Days Of This Notice.

Details: Description Republic Of The Philippines Sp Government Of Ormoc City P.r. No.: 250273 Bids And Awards Committee Quotation No.: 255805-3193 Ormoc City Philgeps No.: Standard Form Title: Request For Quotation Please Quote Your Lowest Price On The Item/s Listed Below, Subject To The General Conditions On The Last Page, Stating The Shortest Time Of Delivery And Submit Your Quotation Duly Signed By You Or Your Authorized Representative Not Later Than _______ _______________________. (sgd) Katheryn A. Solaña Procurement Officer Note: (1) All Entries Must Be Typewritten Or Legibly Written. Of Acceptance By The End-user. (4) Price Validity Shall Be For A Period Of (2) Delivery Period Within 45 C.d. Upon Receipt Of The Sixty (60) Days. (5) G-eps Reg No., Mayors Permit, Dti/sec, And For Abc's Above Approved Funded Purchase Order (p.o.). Administrative 500k - Itr & Omnibus Sworn Statement Shall Be Attached Upon Submission Penalties Pursuant To Sec. 69 Of The Revised Irr-ra 9184 Shall (6) Bidders Shall Submit Original Brochures Showing Certifications Of Be For A Minimum For Non-delivery Without Valid Reason. The Products If Applicable. (7) The Approved Budget Ceiling For This (3) Warranty Shall Be For A Period Of Three (3) Months Of Procurement Is (amount Indicated Below) Supplies & Materials, One (1) Year For Equipment, From Date Php 277,680.00 Activities Schedule From To 1 Issuance Of Canvass Tuesday February 04, 2025 Friday February 07, 2025 2 Submission Of Canvass Monday February 10, 2025 10:00 Am 3 Opening Of Canvass Monday February 10, 2025 2:00 Pm # Item And Description Qty Unit Cost Total 1 Supply And Installation Of Sound System 1 Lot Audio Processor Digital Sound Processor, 4 Input, 8 Output, Limiter Crosover,equalizer,noisegate,feedback,delay,fir,96k/190k 16-band Parametic Eq Equipped W/ Output Fir Filter High & Low Pass Filter, Signal Generator, Noise Gate Input Compression,output Limite,usb & Rs232 Control Port High And Low Pass Filter: Butterworth Slope: 6/12/18/24/30/36/42/48db/oct Linkwich Rayleigh: 12/24/36/48db/o, Wifi Connection, 220v/60hz 4 Channel Amplifier 1300watts Per Channel, Maximum Ouput Power: 8 Ohms Per Channel 1300watts,4 Ohms Per Channel 2100watts Performance With Gain: Thd 20hz-20khz @ 1w-<0.1% Voltage Peak Imiter (vpl) Max Output: Vpl Selectable Per Channel - 150,121,101,83,70,56,47,38v Vpl Mode Per Channel - Hard/soft Gain & Level: Amplifier Gain Selectable=23,26,32,35,38, 41,44 Db, Default Gain: 35db, Connector:pin Xlr Balanced Ouput Connector Neutrik Speakon Power Sequencer Line Voltage:220v50-60hz, Number Of Outlet:10 Front Panel Mete: Digital Voltmeter Control: Front Panel With On/off Switch & Light Dimmer Knobs, Ac Protection: Surge Protection Maximum Current Rating: 15 (amps) Mic Mixer Type Analog Mixer, Channel 6, Faders: 11x60mm Inputs-mic Preamps: 4 X Xlr-1/4" Combo, 2x Xlr Phantom Power: 48v, Channels 1-78 Input-line: 8x1/4"input-other:2xdual Rca Stereo Outputs -main: 2 X Xlr, 2 X /4" Output - Other: 2 X 1/4' (monitor), Aux Sends: 2 X 1/4" Busses/groups: 1xstereo, 2xgroup, Headphones: 1x1/4"trs Other I/o: 1 X 1/4"(footswitch), Eqbands: 3 Band (high,mid,low), Effects: Spx With 24 Programs Rackmountable: Rack Mount Kit (kr-mg12) Sold Separately Power Source: Standard Iec Ac Cable Height:4.6",width12.1"depth:16.6",weight:9.3lbs Audio Interface 2 Units, Bus/external Power, Mac/windows/ipadsos 2 Xlr Mic Preamps, 2 1/4"line/hi-z Ins 1 Headphone Out, @ Monitor Outs 24-bit/192khz Ad/da Conversion, Auto Gain Clip Safe Control, 48v Zero Latency Direct Monitoring, Mic Air Mode, Multicolor Gain Hales, Virtual Loop Back Streaming Ableton, Pro Tools, Hitmaker Expansion Stereo Shielded Cables Royal Cord 4 Rolls Hdmi Cable 30m, Din Cable 10m,5m, Utp Cat6e Cable 150m, Connectors Xlr,stereo Grand Total >>> * Brand And Model : Warranty : Delivery Period : Price Validity : After Having Carefully Read And Accepted Your Conditions, I/we Quote You On The Item At Prices Noted Above And Hereby Commit To Deliver The Same If Adjudged To Have The Lowest And Responsive Quotation. Business Name 2025-02-250273 Printed Name/signature/date

Details: Nsn 7r-2915-014545723-qe, Tdp Ver 001, Qty 49 Ea, Delivery Fob Origin. This Part Requires Engineering Source Approval By The Design Control Activity In Order To Maintain The Quality Of The Part. Existing Unique Design Capability, Engineering Skills, And Manufacturing/repair Knowledge By The Qualified Source(s) Require Acquisition/repair Of The Part From The Approved Source(s). The Approved Source(s) Retain Data Rights,manufacturing/repair Knowledge, Or Technical Data That Are Not Economically Available To The Government, And The Data Or Knowledge Is Essential To Maintaining The Quality Of The Part. An Alternate Source Must Qualify In Accordance With The Design Control Activity's Procedures, As Approved By The Cognizant Government Engineering Activity. The Qualification Procedures Must Be Approved By The Government Engineering Activity Having Jurisdiction Over The Part In The Intended Application. The Subject Item Requires Government Source Approval Prior To Contract Award, As The Item Is Flight Critical And/or The Technical Data Available Has Not Been Determined Adequate To Support Acquisition Via Full And Open Competition. Only The Source(s) Previously Approved By The Government For This Item Have Been Solicited. The Time Required For Approval Of A New Source Is Normally Such That An Award Cannot Be Delayed Pending Approval Of A New Source. If You Are Not An Approved Source You Must Submit, Together With Your Proposal, The Information Detailed In One Of The Navsup Weapon Systems Support (navsup Wss) Source Approval Information Brochures Listed Below. Spares: Https://www.navsup.navy.mil/navsup-enterprise/navsup-weapon-systems-sup Port/business-opps/ Repair: Https://www.navsup.navy.mil/navsup-enterprise/navsup -weapon-systems-support/business-opps/ Technical Data Required To Be Submitted Based On Your Company's Experience In Production Of The Same Or Similar Item, Or If This Is An Item You Have Never Made. If Your Request For Source Approval Is Currently Being Evaluated At Navsup Wss Submit With Your Offer A Copy Of The Cover Letter Which Forwarded Your Request For Source Approval. Offers Received Which Fail To Provide All Data Required By The Source Approval Brochure Or Document Previous Submission Of All Data Required By The Source Approval Brochure Will Not Be Considered For Award Under This Solicitation. Please Note, If Evaluation Of A Source Approval Request Submitted Hereunder Cannot Be Processed In Time And/or Approval Requirements Preclude The Ability To Obtain Subject Items In Time To Meet Government Requirements, Award Of The Subject Requirement May Continue Based On Fleet Support Needs. The Navsup Wss Commercial Item Identification Brochure Is Now Available At: "https://www.navsup.navy.mil/navsup-enterprise/navsup-weapon-systems-support/bus Iness-opps/" Interested Parties May Obtain Copies Of Military And Federal Specificationsand Standards, Qualified Products Lists (qpls), Qualified Product Databases(qpds), Military Handbooks, And Other Standardized Documents From The Dodsingle Stock Point (dodssp) At Document Automation And Production Service(daps) In Philadelphia, Pa. Note: Patterns, Drawings, Deviation Lists, Purchase Descriptions, Etc. Are Not Stocked At Dodssp. Most Documents Are Available In Adobe Pdf Format From Assist-online At: Http://quicksearch.dla.mil/. Users May Use Assist-quick Search To Search For And Download Available Documents Directly Using Standard Browser Software. Documents That Are Not Available For Downloading From Assist-quick Search Can Be Ordered From The Dodssp Website Using The Assist Shopping Wizard After Obtaining A Dodssp Customer Account By Following The Registration Procedures. Users Who Do Not Have Access To The Internet May Contact The Dodssp Assisthelp Desk At 215-697-2667 Or 215-697-2179 (dsn: 442-2667), Or Mail Their Request To Dladocument Services, Bldg. 4/d, 700 Robbins Avenue, Philadelphia Pa 19111-5094. The Proposed Contract Action Is For Supplies Or Services For Which The Government Intends To Solicit And Negotiate With Only One Source Under The Authority Of Far 6.302-1. All Responsible Sources May Identify Their Interest And Capability To Respond To The Requirement Or Submit Proposals, Quotationsor Capability Statements. This Notice Of Intent Is Not A Request Forcompetitive Proposals. However, All Proposals Received Within 45 Days (30days If Award Is Issued Under An Existing Basic Ordering Agreement (boa) Afterdate Of Publication Of This Synopsis Will Be Considered By The Government. A Determination By The Government Not To Compete With This Proposed Contract Based Upon Responses To This Notice Is Solely Within The Discretion Of The Government. Information Received Will Normally Be Considered Solely For The Purpose Of Determining Whether To Conduct A Competitive Procurement. Award Will Be Made Only If The Offeror, The Product/service, Or The Manufacturer Meets The Qualification Requirement(s) At Time Of Award, In Accordance With Far Clause 52.209-1. The Solicitation Identifies The Office Where Additional Information Can Be Obtained Concerning Qualification Requirements And Is Cited In Each Individual Solicitation. Based Upon Market Research, The Government Is Not Using The Policies Contained In Far Part 12, Acquisition Of Commercial Items, In Its Solicitation For The Described Supplies Or Services. However, Interested Persons May Identify Tothe Contracting Officer Their Interest And Capability To Satisfy Thegovernment's Requirement With A Commercial Item Within 15 Days Of This Notice.

Details: Description Pr 2024-08-3611 1. 1.1 Unit/s Gravel Bedding 2. 10 Bag/s Cement 3. 1 Cu.m Washed Sand 4. 1 Cu.m 3/4 Screen Gravel 5. 37 Kilo/s 10 Lenghts 10mm Dia. 6m Def. Bar Grade 40 6. 1.52 Kilo/s #126 Galvanized Iron Wire 7. 4 Set/s Stainless Steel Single Slot Lavatory 8. 30 Piece/s 600mm X 600 Ceramic Tiles 9. 4 Sack/s Cement 10. 1 Cu.m Washed Sand 11. 2 Bag/s Tile Grout 12. 2 Bag/s Tile Adhesive 13. 80 Piece/s 4.5mm Fiber Cement Board 14. 240 Piece/s Metal Furring 3m 15. 76 Piece/s Carrying Channel 16. 212 Piece/s Hanger Bars/rod 17. 1267 Piece/s Channel Clip 18. 51 Piece/s Wall Angle 19. 2955 Piece/s Rivets 20. 846 Piece/s 1 Inch Metal Screw 21. 1 Set/s D-1 Double Swing 22. 6 Set/s D-2 Single Swing Door 23. 1 Set/s D-3 Single Sliding Door 24. 1 Set/s W-1 Sliding Window With Mm Thk. Clear Glass 25. 1 Set/s W-2 Sliding Window With Mm Thk. Clear Glass 26. 129 Sq.m 6mm Thk Clear Glass On Powder Coated Aluminum 27. 1 Set/s D-2 Pvc Flush Door On Pvc Jamb With Louver 28. 2 Piece/s Putty Plate 29. 6 Piece/s Paint Roller #6 30. 2 Piece/s Paint Tray 31. 6 Piece/s Paint Brush 32. 16 Gallon/s Acrylic Cast 33. 13 Gallon/s Acrylic Printer 34. 25 Gallon/s Acrylic Semi-gloss Topcoat 35. 7 Gallon/s Acrytex Reducer 36. 1 Roll/s Sand Paper 37. 11 Gallon/s Acrytex Cast 38. 9 Gallon/s Acrytex Primer 39. 3 Set/s Non-sag Epoxy 4l (a&b) 40. 17 Gallon/s Acrytex Flat White 41. 5 Gallon/s Acrytex Reducer 42. 2 Piece/s Putty Plate 43. 2 Piece/s Paint Brush #3 44. 2 Piece/s Paint Brush #1 1/2 45. 2 Piece/s Paint Tray 46. 2 Piece/s Paint Roller #6 47. 2 Piece/s Mini Roller 48. 10 Piece/s Masking Tape 1 Inch 49. 10 Piece/s Mesh Tape 2 Inches 50. 1 Roll/s Assorted Sand Paper 51. 3 Box/es 3.5mm Thhn Stranded Wire (black) 52. 3 Box/es 3.5mm Thhn Stranded Wire (white) 53. 2 Box/es 5.5mm Thhn Stranded Wire (white) 54. 2 Box/es 5.5mm Thhn Stranded Wire (white) 55. 10 Meter/s 8.0mm Thhn Stranded Wire (white) 56. 30 Meter/s 14.0mm Thhn Stranded Wire (white) 57. 11 Set/s Douplex Universal Outlet With Ground, 250v-15a 58. 4 Set/s Acu Outlet 59. 1 Set/s 2-gang, 1-way Flush Type Switch, 250v-10a 60. 8 Set/s 1-gang, 1-way Flush Type Switch, 250v-10a 61. 3 Kilo/s G.i Tie Wire #16 62. 4 Set/s 12watts Led Downlight Lighting Fixtures 63. 8 Set/s 15watts Led Downlight Lighting Fixtures 64. 16 Set/s 2 X 36watts Flourescent Lighting 65. 1 Set/s 10 Branches Panelboard With Ground Bus 66. 3 Set/s 20at/50af, 2p Moided Case Circuit Breaker 67. 4 Set/s 30at/50af, 2p Moided Case Circuit Breaker 68. 1 Set/s 60at/50af, 2p Moided Case Circuit Breaker 69. 18 Piece/s 4.5mm Fiber Cement Board 70. 28 Piece/s Metal Studs 3mm 71. 200 Piece/s 1 Inch Metal Screw 72. 133 Sq.m Aluminum Composite Panel 73. 25 Piece/s Stainless Steel 3d Lettering 20 Inches 74. 2 Piece/s Stainless Steel 3d Logo 36 Inches

Details: Nsn 7r-1630-014183177-v2, Tdp Ver 002, Qty 24 Ea, Delivery Fob Origin. This Part Requires Engineering Source Approval By The Design Control Activity In Order To Maintain The Quality Of The Part. Existing Unique Design Capability, Engineering Skills, And Manufacturing/repair Knowledge By The Qualified Source(s) Require Acquisition/repair Of The Part From The Approved Source(s). The Approved Source(s) Retain Data Rights,manufacturing/repair Knowledge, Or Technical Data That Are Not Economically Available To The Government, And The Data Or Knowledge Is Essential To Maintaining The Quality Of The Part. An Alternate Source Must Qualify In Accordance With The Design Control Activity's Procedures, As Approved By The Cognizant Government Engineering Activity. The Qualification Procedures Must Be Approved By The Government Engineering Activity Having Jurisdiction Over The Part In The Intended Application. The Subject Item Requires Government Source Approval Prior To Contract Award, As The Item Is Flight Critical And/or The Technical Data Available Has Not Been Determined Adequate To Support Acquisition Via Full And Open Competition. Only The Source(s) Previously Approved By The Government For This Item Have Been Solicited. The Time Required For Approval Of A New Source Is Normally Such That An Award Cannot Be Delayed Pending Approval Of A New Source. If You Are Not An Approved Source You Must Submit, Together With Your Proposal, The Information Detailed In One Of The Navsup Weapon Systems Support (navsup Wss)source Approval Information Brochures Listed Below. Spares: Https://www.navsup.navy.mil/navsup-enterprise/navsup-weapon-systems-sup Port/business-opps/ Repair: Https://www.navsup.navy.mil/navsup-enterprise/navsup -weapon-systems-support/business-opps/ Technical Data Required To Be Submitted Based On Your Company's Experience In Production Of The Same Or Similar Item, Or If This Is An Item You Have Never Made. If Your Request For Source Approval Is Currently Being Evaluated At Navsup Wss Submit With Your Offer A Copy Of The Cover Letter Which Forwarded Your Request For Source Approval. Offers Received Which Fail To Provide All Data Required By The Source Approval Brochure Or Document Previous Submission Of All Data Required By The Source Approval Brochure Will Not Be Considered For Award Under This Solicitation. Please Note, If Evaluation Of A Source Approval Request Submitted Hereunder Cannot Be Processed In Time And/or Approval Requirements Preclude The Ability To Obtain Subject Items In Time To Meet Government Requirements, Award Of The Subject Requirement May Continue Based On Fleet Support Needs. The Navsup Wss Commercial Item Identification Brochure Is Now Available At: "https://www.navsup.navy.mil/navsup-enterprise/navsup-weapon-systems-support/bus Iness-opps/"interested Parties May Obtain Copies Of Military And Federal Specificationsand Standards, Qualified Products Lists (qpls), Qualified Product Databases(qpds), Military Handbooks, And Other Standardized Documents From The Dodsingle Stock Point (dodssp) At Document Automation And Production Service(daps) In Philadelphia, Pa. Note: Patterns, Drawings, Deviation Lists, Purchase Descriptions, Etc. Are Not Stocked At Dodssp. Most Documents Are Available In Adobe Pdf Format From Assist-online At: Http://quicksearch.dla.mil/. Users May Use Assist-quick Search To Search For And Download Available Documents Directly Using Standard Browser Software. Documents That Are Not Available For Downloading From Assist-quick Search Can Be Ordered From The Dodssp Website Using The Assist Shopping Wizard After Obtaining A Dodssp Customer Account By Following The Registration Procedures. Users Who Do Not Have Access To The Internet May Contact The Dodssp Assisthelp Desk At 215-697-2667 Or 215-697-2179 (dsn: 442-2667), Or Mail Their Request To Dladocument Services, Bldg. 4/d, 700 Robbins Avenue, Philadelphia Pa 19111-5094.the Proposed Contract Action Is For Supplies Or Services For Which Thegovernment Intends To Solicit And Negotiate With Only One Source Under The Authority Of Far 6.302-1. All Responsible Sources May Identify Their Interest And Capability To Respond To The Requirement Or Submit Proposals, Quotationsor Capability Statements. This Notice Of Intent Is Not A Request Forcompetitive Proposals. However, All Proposals Received Within 45 Days (30days If Award Is Issued Under An Existing Basic Ordering Agreement (boa) Afterdate Of Publication Of This Synopsis Will Be Considered By The Government. A Determination By The Government Not To Compete With This Proposed Contract Based Upon Responses To This Notice Is Solely Within The Discretion Of The Government. Information Received Will Normally Be Considered Solely For The Purpose Of Determining Whether To Conduct A Competitive Procurement.award Will Be Made Only If The Offeror, The Product/service, Or Themanufacturer Meets The Qualification Requirement(s) At Time Of Award, Inaccordance With Far Clause 52.209-1. The Solicitation Identifies The Officewhere Additional Information Can Be Obtained Concerning Qualificationrequirements And Is Cited In Each Individual Solicitation.one Or More Of The Items Under This Acquisition Is Subject To: Free Trade Agreements, If Dfars Clause 252.225-7036 Buy American Act--free Trade Agreements--balance Of Payments Program, Is Included In Thesolicitation. The World Trade Organization Government Procurement Agreement And Free Trade Agreements, If Dfars Clause 252.225-7021 Trade Agreements, Is Included In The Solicitation. "navsup Wss Intends On Awarding Sole Source To On Awarding Sole Source To Non-prime Source(s) And That The Lack Of Response From Any Other Source Will Consider Them To Be Not Interested."

Details: Nsn 7r-6115-016484473-rq, Tdp Ver 001, Qty 2 Ea, Delivery Fob Origin. All Contractual Documents (i.e. Contracts, Purchase Orders, Task Orders, Delivery Orders And Modifications) Related To The Instant Procurement Are Considered To Be "issued" By The Government When Copies Are Either Deposited In The Mail, Transmitted By Facsimile, Or Sent By Other Electronic Commerce Methods, Such As Email. The Government's Acceptance Of The Contractor's Proposal Constitutes Bilateral Agreement To "issue" Contractual Documents As Detailed Herein. Early And Incremental Deliveries Accepted. This Part Requires Engineering Source Approval By The Design Control Activity In Order To Maintain The Quality Of The Part. Existing Unique Design Capability, Engineering Skills, And Manufacturing/repair Knowledge By The Qualified Source(s) Require Acquisition/repair Of The Part From The Approved Source(s). The Approved Source(s) Retain Data Rights,manufacturing/repair Knowledge, Or Technical Data That Are Not Economically Available To The Government, And The Data Or Knowledge Is Essential To Maintaining The Quality Of The Part. An Alternate Source Must Qualify In Accordance With The Design Control Activity's Procedures, As Approved By The Cognizant Government Engineering Activity. The Qualification Procedures Must Be Approved By The Government Engineering Activity Having Jurisdiction Over The Part In The Intended Application. The Subject Item Requires Government Source Approval Prior To Contract Award, As The Item Is Flight Critical And/or The Technical Data Available Has Not Been Determined Adequate To Support Acquisition Via Full And Open Competition. Only The Source(s) Previously Approved By The Government For This Item Have Been Solicited. The Time Required For Approval Of A New Source Is Normally Such That An Award Cannot Be Delayed Pending Approval Of A New Source. If You Are Not An Approved Source You Must Submit, Together With Your Proposal, The Information Detailed In One Of The Navsup Weapon Systems Support (navsup Wss) Source Approval Information Brochures Listed Below. Spares: Https://www.navsup.navy.mil/navsup-enterprise/navsup-weapon-systems-sup Port/business-opps/ Repair: Https://www.navsup.navy.mil/navsup-enterprise/navsup -weapon-systems-support/business-opps/ Technical Data Required To Be Submitted Based On Your Company's Experience In Production Of The Same Or Similar Item, Or If This Is An Item You Have Never Made. If Your Request For Source Approval Is Currently Being Evaluated At Navsup Wss Submit With Your Offer A Copy Of The Cover Letter Which Forwarded Your Request For Source Approval. Offers Received Which Fail To Provide All Data Required By The Source Approval Brochure Or Document Previous Submission Of All Data Required By The Source Approval Brochure Will Not Be Considered For Award Under This Solicitation. Please Note, If Evaluation Of A Source Approval Request Submitted Hereunder Cannot Be Processed In Time And/or Approval Requirements Preclude The Ability To Obtain Subject Items In Time To Meet Government Requirements, Award Of The Subject Requirement May Continue Based On Fleet Support Needs. The Navsup Wss Commercial Item Identification Brochure Is Now Available At: "https://www.navsup.navy.mil/navsup-enterprise/navsup-weapon-systems-support/bus Iness-opps/" Interested Parties May Obtain Copies Of Military And Federal Specificationsand Standards, Qualified Products Lists (qpls), Qualified Product Databases(qpds), Military Handbooks, And Other Standardized Documents From The Dodsingle Stock Point (dodssp) At Document Automation And Production Service(daps) In Philadelphia, Pa. Note: Patterns, Drawings, Deviation Lists, Purchase Descriptions, Etc. Are Not Stocked At Dodssp. Most Documents Are Available In Adobe Pdf Format From Assist-online At: Http://quicksearch.dla.mil/. Users May Use Assist-quick Search To Search For And Download Available Documents Directly Using Standard Browser Software. Documents That Are Not Available For Downloading From Assist-quick Search Can Be Ordered From The Dodssp Website Using The Assist Shopping Wizard After Obtaining A Dodssp Customer Account By Following The Registration Procedures. Users Who Do Not Have Access To The Internet May Contact The Dodssp Assisthelp Desk At 215-697-2667 Or 215-697-2179 (dsn: 442-2667), Or Mail Their Request To Dladocument Services, Bldg. 4/d, 700 Robbins Avenue, Philadelphia Pa 19111-5094. The Proposed Contract Action Is For Supplies Or Services For Which The Government Intends To Solicit And Negotiate With Only One Source Under The Authority Of Far 6.302-1. All Responsible Sources May Identify Their Interest And Capability To Respond To The Requirement Or Submit Proposals, Quotationsor Capability Statements. This Notice Of Intent Is Not A Request Forcompetitive Proposals. However, All Proposals Received Within 45 Days (30days If Award Is Issued Under An Existing Basic Ordering Agreement (boa) Afterdate Of Publication Of This Synopsis Will Be Considered By The Government. A Determination By The Government Not To Compete With This Proposed Contract Based Upon Responses To This Notice Is Solely Within The Discretion Of The Government. Information Received Will Normally Be Considered Solely For The Purpose Of Determining Whether To Conduct A Competitive Procurement. Based Upon Market Research, The Government Is Not Using The Policies Contained In Far Part 12, Acquisition Of Commercial Items, In Its Solicitation For The Described Supplies Or Services. However, Interested Persons May Identify Tothe Contracting Officer Their Interest And Capability To Satisfy Thegovernment's Requirement With A Commercial Item Within 15 Days Of This Notice.

Details: Description 1. Internet Protocol Gateway Nmea 2000® Connector Devicenet Micro – C Nmea 2000® Isolation Opto – Isolated Usb Connector For Usb Type A Ethernet Connector Rj – 45 Operating Voltage 9 To 32 Volts Power Consumption Size: 5.000” X 4.500” X 2.375” Nmea 2000® Standard Level A Fcc And Ce Mark Electromagnetic Compatibility 1 Unit 2. Vessel Data Recorder Data Recorded On Solid State Memory Via Removable Usb Flash Drive Free Data Extraction Software (n2kextractor™) Nmea 2000® Connector Devicenet Micro Usb Connector Usb Type A Ethernet Connecter Rj45 Operating Voltage 9 To 32 Volts Power Consumption Size: 5.000” X 4.500” X 2.375” Nmea 2000® Standard Level A Fcc And Ce Mark Electromagnetic Compatibility 1 Unit 3. Wireless – N Router 2.4ghz/5ghz Wireless – N Router Pre – Configured For Use With Maretron’s N2kview® Up To 300+300mbps Wireless Speeds Four Internal Antennas Supports Wpa/wpa2 Wireless Security Four 10/100 Ethernet Ports For Wired Connections 1 Unit 4. Livescope With Lvs34 Transducer Transducer Beamwidth: 20° To 135° Transducer Cable Length: 20ft Transducer Number Of Pins: 21 Water Rating: Ipx7 Weight: Gls 10 Sonar Black Box: 2.0kg Lv32 Transducer: 0.9kg Power Input: 10 -32 V Power Usage: 21w Typical, 58w Max Frequency: 530 – 1,100khz Transmit Power: 500w Maximum Depth: Down And Forward: 61.0m 1 Unit 1. Gps Antenna/receiver Gps 200-1, Gps & Glonass <3m (autonomous), 2.5m (waas) Position Accuracy 99 Channels, -161dbm Tacking Sensitivity 10hz Position And Speed Update Rate 1hz Time Update Rate Waas Satellite Based Augmentation System Lithium Battery Backup Accept Data Cards: 2 Microsd Cards 9 – 32v Operating Voltage <150ma Power Consumption 4” (diameter) X 1.65” (height), 6oz Level A Nmea 2000® Tested To Iec 60945 Fcc And Ce Mark: Electromagnetic Compatibility 1 Unit 2. Solid – State Rate / Gyro Compass W/o Cables Ssc300 – 01 Solid State Rate / Gyro Compass <0.7deg Rms Static Heading Accuracy 0.1deg Heading Display Resolution 20hz Heading Update Rate 10hz Pitch And Roll Update Rate 9 – 16v Operating Voltage <50ma Power Consumption 4.46” X 3.23” 2.14 Lwh, 7oz. Level A Nmea 2000® Ec61162 – 3, Iec 60945 Fcc And Ce Mark: Electromagnetic Compatibility 1 Unit 3. Direct Current Monitor Dc Monitor W/ 200 Amp Current Transducer Dcm100 Battery Harness With Fuse Lemhta200 – S 200 Amp Current Transducer With Cable 0 – 50 Vdc Battery Sense Voltage Range ±100 Mv Battery Sense Voltage Accuracy 9 – 32v Operating Voltage, Nmea / Battery Interface 70ma Battery Interface, 50ma Nmea 2000® Connection 3.50” X 4.20” X 2.03” Lwg, 13oz 1 Unit 4. Nmea 2000® / Usb Gateway Nmea 2000® Connected Devicenet Micro – C Nmea 2000® / Usb Isolation Opto – Isolated Usb Connector Usb Type B Operating Voltage 9 To 32 Volts Power Consumption <50ma Size: 3.11” X 3.46” X 1.38” (79mm X 88mm X 35mm) 1 Unit 5. 0183 To N2k Gateway W/ Pc Interface, Usb Supply Voltage (nmea 200 Port) 9 To 30v Dc Supply Current (nmea 2000 Port) 62ma @9v Dc Nmea 2000 Port (ngx – 1 – Iso / Ngx – 1 – Usb), 250kbps, M12 Male Nmea 2000 Port To Usb Port Galvanic Isolation Nmea 2000 Nmea 2000 Certified 1 Unit 6. 8” Vessel Monitoring And Control Touchscreen Includes The N2kview® Software 8” Tft Lcd Panel, Led Backlit Widescreen Aspect Ratio 5:3 1350 Nits Brightness (optically Bonded) Solid State Disk Drive, Fanless Cooling System Dual Can Bus For Single Or Redundant Nmea 2000® Network Connections Iec 60945, Nmea 2000® 1 Unit

Details: Nsn 7r-4320-014552588-qe, Tdp Ver 002, Qty 27 Ea, Delivery Fob Origin. This Part Requires Engineering Source Approval By The Design Control Activity In Order To Maintain The Quality Of The Part. Existing Unique Design Capability, Engineering Skills, And Manufacturing/repair Knowledge By The Qualified Source(s) Require Acquisition/repair Of The Part From The Approved Source(s). The Approved Source(s) Retain Data Rights,manufacturing/repair Knowledge, Or Technical Data That Are Not Economically Available To The Government, And The Data Or Knowledge Is Essential To Maintaining The Quality Of The Part. An Alternate Source Must Qualify In Accordance With The Design Control Activity's Procedures, As Approved By The Cognizant Government Engineering Activity. The Qualification Procedures Must Be Approved By The Government Engineering Activity Having Jurisdiction Over The Part In The Intended Application. The Subject Item Requires Government Source Approval Prior To Contract Award, As The Item Is Flight Critical And/or The Technical Data Available Has Not Been Determined Adequate To Support Acquisition Via Full And Open Competition. Only The Source(s) Previously Approved By The Government For This Item Have Been Solicited. The Time Required For Approval Of A New Source Is Normally Such That An Award Cannot Be Delayed Pending Approval Of A New Source. If You Are Not An Approved Source You Must Submit, Together With Your Proposal, The Information Detailed In One Of The Navsup Weapon Systems Support (navsup Wss) Source Approval Information Brochures Listed Below. Spares: Https://www.navsup.navy.mil/navsup-enterprise/navsup-weapon-systems-sup Port/business-opps/ Repair: Https://www.navsup.navy.mil/navsup-enterprise/navsup -weapon-systems-support/business-opps/ Technical Data Required To Be Submitted Based On Your Company's Experience In Production Of The Same Or Similar Item, Or If This Is An Item You Have Never Made. If Your Request For Source Approval Is Currently Being Evaluated At Navsup Wss Submit With Your Offer A Copy Of The Cover Letter Which Forwarded Your Request For Source Approval. Offers Received Which Fail To Provide All Data Required By The Source Approval Brochure Or Document Previous Submission Of All Data Required By The Source Approval Brochure Will Not Be Considered For Award Under This Solicitation. Please Note, If Evaluation Of A Source Approval Request Submitted Hereunder Cannot Be Processed In Time And/or Approval Requirements Preclude The Ability To Obtain Subject Items In Time To Meet Government Requirements, Award Of The Subject Requirement May Continue Based On Fleet Support Needs. The Navsup Wss Commercial Item Identification Brochure Is Now Available At: "https://www.navsup.navy.mil/navsup-enterprise/navsup-weapon-systems-support/bus Iness-opps/" Interested Parties May Obtain Copies Of Military And Federal Specificationsand Standards, Qualified Products Lists (qpls), Qualified Product Databases(qpds), Military Handbooks, And Other Standardized Documents From The Dodsingle Stock Point (dodssp) At Document Automation And Production Service(daps) In Philadelphia, Pa. Note: Patterns, Drawings, Deviation Lists, Purchase Descriptions, Etc. Are Not Stocked At Dodssp. Most Documents Are Available In Adobe Pdf Format From Assist-online At: Http://quicksearch.dla.mil/. Users May Use Assist-quick Search To Search For And Download Available Documents Directly Using Standard Browser Software. Documents That Are Not Available For Downloading From Assist-quick Search Can Be Ordered From The Dodssp Website Using The Assist Shopping Wizard After Obtaining A Dodssp Customer Account By Following The Registration Procedures. Users Who Do Not Have Access To The Internet May Contact The Dodssp Assisthelp Desk At 215-697-2667 Or 215-697-2179 (dsn: 442-2667), Or Mail Their Request To Dladocument Services, Bldg. 4/d, 700 Robbins Avenue, Philadelphia Pa 19111-5094. The Proposed Contract Action Is For Supplies Or Services For Which The Government Intends To Solicit And Negotiate With Only One Source Under The Authority Of Far 6.302-1. All Responsible Sources May Identify Their Interest And Capability To Respond To The Requirement Or Submit Proposals, Quotationsor Capability Statements. This Notice Of Intent Is Not A Request Forcompetitive Proposals. However, All Proposals Received Within 45 Days (30days If Award Is Issued Under An Existing Basic Ordering Agreement (boa) Afterdate Of Publication Of This Synopsis Will Be Considered By The Government. A Determination By The Government Not To Compete With This Proposed Contract Based Upon Responses To This Notice Is Solely Within The Discretion Of The Government. Information Received Will Normally Be Considered Solely For The Purpose Of Determining Whether To Conduct A Competitive Procurement. Award Will Be Made Only If The Offeror, The Product/service, Or The Manufacturer Meets The Qualification Requirement(s) At Time Of Award, In Accordance With Far Clause 52.209-1. The Solicitation Identifies The Office Where Additional Information Can Be Obtained Concerning Qualification Requirements And Is Cited In Each Individual Solicitation. Based Upon Market Research, The Government Is Not Using The Policies Contained In Far Part 12, Acquisition Of Commercial Items, In Its Solicitation For The Described Supplies Or Services. However, Interested Persons May Identify Tothe Contracting Officer Their Interest And Capability To Satisfy Thegovernment's Requirement With A Commercial Item Within 15 Days Of This Notice.