Tenders of Bureau Of Engraving And Printing Usa

Amendment 0001 Issued January 23, 2024 See Attachment Titled, "2031za24q00070 Rfq Amendment 0001 01232024." this Requirement Is For Alternate Firing Range Facility Support For Bep Wcf Police Services Branch To Conduct Annual Quarterly Qualification, In-service And Police Basic Training Program (pbtp) Classes. Training Space Should Include Two Indoor Ranges To Provide For Simultaneous Training With Different Weapon Systems. Range Capability Should Be Fully Automated With A Dedicated Control Booth For Each Area And Consist Of A Ten Lane 50-yard Range And 25-yard Tactical (law Enforcement Officer -leo) Training Range With A Minimum Two Lanes. Range Capability Should Provide A Turning Target System.     

Tour Brochure Distribution Services

Notice Of Intent To Award A Sole Source

This Will Be A 100% Total Small Business Set Aside. the Bureau Of Engraving And Printing Has A Requirment For The Fabrication, Delivery, Installation, Set-up, Training And Commissioning Of Twelve (12) Jogger/aerator System. This System Will Be Used To Prepare Sheets For Automatic Feeding In Bep Print And Inspect Operations. Five (5) Equipment Will Be Installed At Bep’s Western Currency Facility (wcf) Located In Fort Worth, Texas And Seven (7) Equipment Will Be Installed At Bep’s District Of Columbia Currency Facility (dcf) Located In Washington D.c. offerors Shall Examine And Follow All Instructions. Failure To Do So May Result In The Proposal Being Determined To Be Unacceptable, Not Evaluated Further And Removed From Consideration For Award. Proposals Shall Conform To Solicitation Provision Far 52.215-1, Instructions To Offerors – Competitive Acquisition And Be Prepared In Accordance With This Section. The Evaluation Factors For Award Can Be Found Under Solicitation Provision 52.212-2 Evaluation—commercial Products And Commercial Services. To Aid In The Evaluation, Proposals Shall Be Clearly And Concisely Written And Well Indexed (cross-indexed As Appropriate) And Logically Assembled. Prospective Offerors Are Asked To Bear In Mind That All Material Submitted Should Be Directly Pertinent To The Requirements Of This Rfp. Extraneous Narratives, Elaborate Brochures, Uninformative “pr” Material And So Forth, Shall Not Be Submitted. All Pages Of Each Part Shall Be Appropriately Numbered, And Identified With The Name Of The Offeror, The Date, And The Solicitation Number To The Extent Practical. The Entire Proposal (all Volumes) Shall Be Submitted Via Email To Ariel.dillon@bep.gov And Brandy.idemudia@bep.gov No Later Than The Date And Time Specified In Sf1449 (solicitation Section 8), May 27, 2024 12:00pm Cst. please See The Attached Solicitation And Statement Of Work For Additional Required Information To Submit A Quote.

Distinctive Currency Paper, Non-distinctive Banknote Paper, And Test Paper Samples To Support The Bureau Of Engraving And Printing (bep) Manufacture Of U.s. Currency.

Information Technology Operations And Maintenance Support (ito&ms)

The Purpose Of This Modification Is To Add The Sole Source Justification For A Brand Name. See Attachment the Quote Submission Date Has Been Extended To Wednesday, 24 July 2024, 3:00pm Edt. this Is A Request For Quote For The Item Listed On Attached Rfq. This Rfq Synopsis/solicitation For Commercial Items Is Prepared In Accordance With The Federal Acquisition Regulations (far) In Subpart 12 & 13. This Is A Firm Fixed-price Procurement Naics Code 327910.

This Is Not A Request For Bids, Quotes Or Proposals. At This Time Nosolicitation Exists. This Notification Is Being Posted For Information Purposes Only. this Procurement Action Is For The Acquisition Of Original Equipment Manufacturer (oem) Spare Parts For Various Bep Press Equipment Used For Currency Manufacturing. The Required Spare Part Is Described Below: bep Item # Map5630 - Hoist, Lifting Device, Cylinder, Wiper, Complete, Kba P/nl6200527, 1000324419. Kba Proprietary above Spare Part Is Manufactured And Is Proprietary To Koenig & Bauer (k&b). There Are No Other Sources That Are Capable Of Supplying The Required Oem Spare Parts Other Than K&b. Bep Does Not Possess The Required Capabilities In Terms Of Labor, Machinery Or Materials To Produce These Items. Therefore, The Government Has Determined That This Procurement Can Only Be Acquired From The Oem Contractor, K&b. the Bureau Of Engraving And Printing (bep) Intends To Sole-source This Requirement And Award To K&b. The Applicable North American Classification Code (naics) Is 333248, All Other Industrial Machinery Manufacturing. this Notice Of Intent Is Not A Request For Competitive Quotes. If You Feel Your Firm Can Provide The Spare Part Mentioned Above, Please Submit A Capability Statement By 4:00pm Edt, 29 July 2024. The Decision Not To Compete This Requirement Is Within The Discretion Of The Government. Any Response To This Notice Must Provide Clear And Convincing Evidence That Competition Would Be Advantageous To The Government. The Government May Consider All Capability Statements Received For Future Requirement. Poc Is William Corley Ii , Business Analyst, William.corleyii@bep.com. No Telephone Calls Will Be Accepted For This Action.

This Is A Request For Quotations (rfq) For Offset Press Blankets For The Bureau Of Engraving And Printing. Please See The Attached Combined Synopsis/solicitation. see Amendment 2031za24q00245 0001, Attached, For Answers To Questions Submitted In Repsonse This Solicitation.

It Accessibility And Section 508 Compliance Services