Bridge Tenders

Details: Project Description The Objective Of The Project (project) Is To Inspect All Underwater Culvert/structures Identified In Attachment A – Statement Of Work, Appendix A - Underwater Inspection List, To Assess Their Current Condition And Provide Critical Information For Repair And Maintenance Activities. Inspection Reports Will Be Supplied To The United States Army Corps Of Engineers (usace). Consultant Shall Provide An Underwater Inspection Team And Qualified Divers To Inspect All Structure Elements Which Are Primarily Below-water. The Underwater Inspection Team Shall Include Individuals Qualified By Experience And Training In The Inspection, Design, Construction And Understanding Of The Operation Of Flood Control Structures. A Minimum Of One (1) Member Of The Inspection Team Shall Be A Professional Engineer Licensed In The State Of Florida Under Chapter 471, Florida Statute. The Professional Engineer, As A Member Of The Inspection Team, Shall Be Responsible For The Overall Underwater Inspection Findings And Recommendations. All Dive Operations Shall Meet The Requirements And Qualifications Of Osha 29 Cfr Part 1910, Subpart T - Commercial Diving Operations. Underwater Inspectors Must Be Familiar With The Principles Of General Civil, Geotechnical, Structural, Electrical And Mechanical Engineering. In Addition To Osha 29 Cfr Part 1910, Consultant Shall Ensure That All Other Applicable Federal And State Safety Regulations Are Met. This Includes Providing Staff And Equipment To Meet The Requirements. Structure Underwater Inspections Shall Be Based On Usace’s Manual Em 1110-2-2902 Conduits, Pipes, And Culverts Associated With Dams And Levee Systems, Chapter 6: Inspections, Condition Assessments, And Prioritized Mitigation Plans. Other Federal Or Industry Standards Of Practice May Be Utilized For Specific Activities If Appropriate. The Following List Presents A Partial Listing Of Inspection Standards; Other Standards May Also Apply. Consultant Shall Use The Most Recent Version Of Referenced Standards. Underwater Inspection Of Bridges Fhwa-nhi-10-027; U.s. Dot/fhwa Underwater Investigations Standard Practice Manual, Level 1 Inspections, American Society Of Civil Engineer’s (asce)

Details: The Road Administration Hereby Offers Supervision And Consulting With The Tender Work Ring Road (1) Around Ölfusá, Alútbud. The tender includes the construction and design of a new ring road on a 3.7 km section from Biskupstungnabraut, over Ölfusá around Efri-laugurdælaeyja and to the existing ring road east of Selfoss, the construction and design of a new suspension bridge over Ölfusá, the construction and design of new junctions at Laugardælaveg and Gaulverjabæjarveg in the east Selfoss, Construction And Design Of Underpasses For Pedestrians And Cycling and Underpasses for Pedestrians and Cars, Construction and Design of Pipes and Pipe Spaces Around the Ölfusár Bridge and Execution of Pipework Outside the Bridge.

Details: The U.s. Fish And Wildlife Service, Hq, 5275 Leesburg Pike, Falls Church 22041 Intends To Award A Sole Source Firm Fixed Price Order Under Authority Of Far 6.302-1, Other Than Full And Open Competition Procedures, And Far Part 13 Simplified Acquisition Procedures To Oceanic Society, Ross, California. This Requirement Is For Continuity Of Services To Expand And Build Upon Its Initial Work Back In 2020. The Training Aim On Bridging The Gap Between Sea Turtle Conservationists And Behavior Change Theory And Methodology, With An Emphasis On Addressing Issues Related To Direct Take And Illegal Trade In Africa.an Active Network Of Sea Turtle Conservationists And Behavior Change Experts Worldwide Will Share Case Studies, Best Practices, Instructional Materials, And Stories That Drive Meaningful Behavior Change For Sea Turtle Conservation. The Study Has Provided A Range Of Educational Materials And Opportunities To Conservation Practitioners Both Online And In-person Since Its Establishment In 2020, Including The Implementation Of Training Workshops At Both The 41st And 42nd International Sea Turtle Symposiums (ists) In Colombia (march 2023) And Thailand (march 2024), Respectively. The Third Training Workshop At The 43rd Ists Is Expected To Take Place In Accra, Ghana (march 2025).the Recipient Has Developed A Model For These Projects; And The Proposed Work Builds Upon The Earlier Research. The Main Goal Of The Project Is To Ensure Participants Gain New Knowledge About The Importance Of Behavior Change, Techniques In Reducing Threats To Sea Turtles, Poaching And Trafficking Both Domestic And International, Illegal Trade, And Ideas On How To Address Them. These Activities Have Followed A Decision-based Framework And Reaching A Critical Phase Where Continued Collaboration With Oceanic Society Will Help Bring In Critical Conservationist Partners From Around The World And Ensure Expert Coaching To Creating An Effective Behavior Change Campaigns Is Achieved. The North American Industry Classification (naics) Code Is 813312, And The Size Standard Is $19.5 Million. This Notice Is Not A Request For Competitive Proposals; However, Firms With Expressed Interest And Capability Are Encouraged To Respond. A Determination By The Government Not To Compete This Requirement Based On Responses To This Notice Is Solely Within The Discretion Of The Government.

Details: Description Republic Of The Philippines Department Of Public Works And Highways Albay 3rd District Engineering Office Regional Office V Paulog, Ligao City Invitation To Bid For Organizational Outcome 2: Protect Lives And Properties Against Major Floods - Flood Management Program - Construction/ Maintenance Of Flood Mitigation Structures And Drainage Systems - Construction Of Flood Control Structure Along Nasisi/tobgon River, Left And Right Side Of Bridge, Brgy. Amtic, Ligao City, Albay The Dpwh - Albay 3rd District Engineering Office, Through National Expenditure Program (nep) Fy 2025 Intends To Apply The Sum As Stated Below Being The Approved Budget For The Contract (abc) To Payments Under The Contract Specified Below. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At The Bid Opening. The Dpwh - Albay 3rd District Engineering Office Through Its Bids And Awards Committee Now Invites Bids For The Hereunder Works: Contract Id No. : 25fo0027 Name Of Contract : Organizational Outcome 2: Protect Lives And Properties Against Major Floods - Flood Management Program - Construction/ Maintenance Of Flood Mitigation Structures And Drainage Systems - Construction Of Flood Control Structure Along Nasisi/tobgon River, Left And Right Side Of Bridge, Brgy. Amtic, Ligao City, Albay Location : Ligao City, Albay Scope Of Works : Construction Of 307.00 L.m. Flood Control Structure At Said Location Approved Budget For The Contract : Forty-eight Million Two Hundred Fifty Thousand Pesos (p 48,250,000.00 ) Contract Duration : 210 Cd Prospective Bidders Should Be Registered With And Classified By The Philippine Contractors Accreditation Board (pcab) With At Least A Pcab License Category B (medium A). Contractors/applicants Who Wish To Participate In This Bidding Are Encouraged To Enroll In The Dpwh Civil Works Application (cwa) At The Dpwh Procurement Service (prs), 5th Floor, Dpwh Building, Bonifacio Drive, Port Area, Manila, While Those Already Enrolled Shall Keep Their Records Current And Updated. The Contractor's Eligibility To Bid On The Project Will Be Determined Using The Dpwh Contactor Profile Eligibility Process (cpep), And Subject To Further Post-qualification. Information On Registration Can Be Obtained From The Prs During Working Weekdays From 7:00 Am To 4:00 Pm, Or At The Dpwh Website Www.dpwh.gov.ph. Bidding Will Be Conducted Through Open Competitive Bidding Using Non-discretionary "pass/fail" Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184, As Well As All Applicable Procurement-related Dpwh Department Orders (do). The Contract Shall Be Awarded To The Lowest Calculated Responsive Bidder (lcrb) Who Was Determined As Such During Post-qualification. Interested Bidders May Obtain Further Information From The Procurement Unit Office, And Inspect The Bidding Documents At Dpwh - Albay 3rd District Engineering Office, Paulog, Ligao City, During Weekdays From 8:00 Am - 12:00 Pm & 1:00 Pm - 5:00 Pm. Prospective Bidders Shall Submit Their Duly Accomplished Forms As Specified In Itb Clause 16. The Technical And Financial Documents Must Be Paginated, Bounded, Tab Marked, And Properly Sealed. All Bidders Are Invited To Attend The Pre-bid Conference As Scheduled For New Instructions. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 19, 2024 Until The Submission Of Bids, From The Given Address, And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Twenty-five Thousand Pesos (p25,000.00). Bidders Can Make Payment For The Purchase Of Bid Documents At Any Dpwh Field Office. Should They Opt To Make Such Payment In Our Office, They Are Advised That The Cut-off Time For Securing The Memo For Order Of Payment Is At 8:45 Am, And The Order Of Payment Itself From The Accounting Section For Such Fee Is At 9:15 Am, Respectively, On The Deadline Date For The Receipt By The Bac Of Bids. It May Also Be Downloaded Free Of Charge From The Philippine Government Electronic Procurement System (philgeps) Website - Www.philgeps.gov.ph, And/or At The Dpwh Website - Www.dpwh.gov.ph, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. The Dpwh - Albay 3rd District Engineering Office Will Hold Pre-bid Conference On November 26, 2024 At 9:00 Am At The Procurement Unit Office, Paulog, Ligao City, Which Shall Be Open To Prospective Bidders. Bid Submission May Be Done Manually Or Electronically/online. However, Bidders Should Only Select One Mode Of Submission, Either Manual Or Electronic. Similar To Manual Submission, The Guidelines For The Preparation And Submission Of An Electronic Bid Are Contained In The Bds. Prospective Bidders. Who Opts To Submit Bids Manually, Shall Present Their Original Official Receipt Of Payment For Bidding Documents (project Specific) To The Bac Secretariat Of This Office Before Deadline Stated Above For Inclusion In The List Of Contractors For Eligibility Processing. Only The Owner Or Authorized Representative/s As Reflected In The Crc Will Be Allowed To Transact Business Relative To Bidding Matters Per D.o. 197 Series Of 2001. Thus, Said Owner Or Representative Is Required To Present Two (2) Government Issued Identification Cards W/ Photo & Signature, For Identity Purposes. Bids Must Be Duly Received By The Bac Secretariat Through Either (i) Manual Submission At The Procurement Unit Office, Paulog, Ligao City, Or (ii) Online Or Electronic Submission At Electronicbids_albay3@dpwh.gov.ph , On Or Before December 10, 2024 At 10:00 Am. Late Bids Shall Not Be Accepted. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 15. Bid Opening Shall Be On December 10, 2024 Right After The Deadline For The Submission And Dropping Of Bids, At The Procurement Unit Office, Paulog, Ligao City. Bids Will Be Opened In The Presence Of The Bidders' Representative/s Who Choose To Attend The Activity. Likewise, Prospective Bidders Are Advised That This Office Will Be Implementing D.o. 28 Series Of 2024 - 3-strike Policy In The Procurement Of Contracts For Infrastructure Works, Goods, And Consulting Services. Prospective Bidders Are Reminded And Emphasis Is Given That, If At The Time Of Post Qualification Procedure, The Bac Verifies That Any Of The Deficiencies Is Due To The Contractor's Fault Or Negligence Pursuant To Section 34.3(b)(ii)(c) Of The 2016 Revised Implementing Rules And Regulations Of Republic Act No. 9184 (2016 Rirr Of Ra 9184), Gppb Circular No. 06-2019 (guidelines On The Implementation Of Early Procurement Activities), The Procuring Entity Shall Disqualify The Contractor From The Award Without Any Right To Reimburse Fees And Incidental Cost Paid For The Procurement Of Infrastructure Contract Subject Of The Bid. Also, Prospective Bidders Are Advised To Indicate Their Company/firm's Official E-mail Address In Their Bidding Documents. Official Communication/s, Pertaining To This Procurement After The Opening Of Bids, Will Be Thru The Internet On Said Official E-mail Address As Reflected In Your Submitted Bidding Documents. The Dpwh-albay 3rd District Engineering Office Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not To Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.1 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Incurring Any Liability To The Affected Bidder/s. For Further Information Please Refer To: Engr. Rubirosa A. Nota Head - Procurement Unit Procurement Unit Office Paulog, Ligao City Albay3rdbacsec@gmail.com Eddie A. Hernandez Bac Chairperson November 18, 2024 Date Issued

Details: Description Invitation To Bid The Nueva Ecija University Of Science And Technology (neust) Through The Bids And Awards Committee (bac), Hereby Invites All Interested Entities Registered With The Philippine Government Electronic Procurement System (philgeps) To Bid For The Hereunder Project, Subject To The General Conditions Stated Herein. Name Of Project: Upgrading Of Programmable Logic Controller (plc) System In The Mechatronics Laboratory Location: College Of Industrial Technology, Neust Gen. Tinio (st.) Campus, Cabanatuan City Approved Budget For The Contract: Php6,419,764.00 Contract Duration: 120 Calendar Days Source Of Fund: Income Cost Of Bidding Documents: Php10,000.00 Project Description: 1lot Item No. Description Qty Unit 1 Programmable Logic Controller For Mechatronics Training System Training Device For The A4 Mounting Frame Or As A Desktop Device With Modern, Industrially Used Programmable Logic Controller And System Interfaces For A Mechatronics Station. It Ensures Highest Performance And User-friendliness For Medium And High-end Applications Of Machine And Plant Automation. Benefits • Stable, Powder-coated, Sheet-steel Mounting System • Suitable For One Mechatronics Station And Suitable As A Tabletop Unit • Mounting Rail For 19" Module Is Attached To The Mounting System • Equipped With 4 Mm Safety Sockets • Integrated Power Supply Further Information The Stable Powder-coated Sheet Steel Support System Contains A 19" Module System Plug Syslink (9 Te), With 2x Syslink Plug-in Connection For Mechatronics Station And Control Panel, Each With 8 Digital Inputs And 8 Digital Outputs And 1x D-sub 15-pin Plug-in Connection With 4 Analog Inputs And 2 Analog Outputs, Emergency Stop Bridge For Connecting A Safety Circuit To Switch Off 8 Digital Outputs. Technical Data: - Dimensions (w X H): 305 Mm X 297 Mm (size 1) - Integrated Power Pack: 100 ... 240 V Ac ±10%; Necessary Accessories: Iec Cables 5 Units 2 Programmable Logic Controller For Electro-pneumatics Training Device For Er Recording Frame (pneumatic/hydraulic) For Solutions In Discrete And Stand-alone Automation Applications Of The Lower Power Range. Further Information The Modular Small Controller Can Be Used For Solutions In Discrete And Stand-alone Automation Applications In The Lower Performance Range. Technical Details: • Digital Inputs On 4 Mm Safety Sockets And Switches/buttons For Signal Simulation • Digital Outputs On 4 Mm Safety Sockets • Analog Inputs And Outputs On 4 Mm Safety Sockets • Simulation Module With 2x Syslink Connector For Control Panel With Digital Inputs And Outputs And D-sub 15-pin Connector With Analog Inputs And Outputs; 4 Mm Safety Sockets For Emergency Stop Bridge To Connect A Safety Circuit For Digital Outputs The Carrier System Consists Of A Lightweight Injection-moulded Housing, Suitable For An Er Mounting Frame Size 2, Dimensions (w X H X D): 364 Mm X 170 Mm X Approx. 80 Mm. The Unit Is Delivered Fully Assembled. Special Licensing Rules Apply To Schools And Training Centers In The Commercial Sector. 6 Units 3 Electro-pneumatics Simulator Software Simulation Software For Pneumatics Is An Application For Creating And Simulating Pneumatic And Electropneumatic Circuits. Valuable Technical Skills Are Learned By Designing Circuits And Simulating Them Interactively. Learning Goals • Creation Of Circuit Diagrams • Identifying And Preventing Errors • Optimization Of Solution Circuit Diagrams Through Interactive Simulations • Understanding Solution Development • Observing Effects Through Real-time Simulations Benefits • Convenient Creation Of Circuit Diagrams And Their Interactive Simulation • Content Tailored To Festo Didactic Learning Systems • Can Be Used Online And Offline • Learning The Effects Of Changes In A Technical Setup And Observing Their Immediate Consequences Through Real-time Simulation • Extensive Library Of Pneumatic, Hydraulic, Electrical Engineering, Electronic And Digital Components. • Further Information Simulation Software For Pneumatics Makes It Possible To Create (electro-)pneumatic Circuits And Simulate Them Interactively. State Changes And Switching Processes Are Calculated Realistically, And Interactive Interventions Can Be Made By Actuating Switches Or Switching Valves. Signals Can Also Be Transmitted Via Connected Hardware Or From Other Programs. In Addition To Real Measuring Devices, Fluidsim 6 Offers Virtual Measuring Devices. Circuits Can Be Constructed From A Library Of Various Electropneumatic Components. In Addition, Grafcet Diagrams Can Be Created And Included In The Simulation If Desired. Simulation Software For Pneumatics Covers The Following Topics: • Pneumatics/electropneumatics • Closed-loop Pneumatics • Vacuum Technology • Electrical Controllers • Digital Technology • Grafcet 6 Units Warranty: • One (1) Year Against Factory Defects Must Include: • On-site Installation And Testing • Three (3) Days Rigid Training For Faculty And Laboratory Technicians • Must Provide Official Partner Or Authorization To Bid From Manufacturer • Iso 9001:2015 Quality Management System Certification From The Manufacturer • Iso 14001: 2015 Environmental Management Certificate From The Manufacturer The Summary Of The Bidding Activities Is As Follows: Activities Schedule 1. Advertisement December 11-18, 2024 2. Issuance Of Bid Documents December 19, 2024 To January 3, 2025 3. Pre-bid Conference December 19, 2024, 2:30pm (via Zoom) 4. Deadline For Submission Of Bids (manual Submission) January 3, 2025, Until 5:00pm Bac Conference Room, Gen. Tinio (st.) Campus, Cabanatuan City 5. Opening Of Bids (face To Face) January 6, 2025, 9:00am Bac Conference Room, Gen. Tinio (st.) Campus, Cabanatuan City General Conditions: All Particulars To The Eligibility Statement And Screening, Bid Security, Performance Security, Pre-bidding Conference, Evaluation Of Bids, Post Qualification And Award Of Contract Shall Be Governed By The Pertinent Provisions Of R.a. 9184 And Its Implementing Rules And Regulations. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act”. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Business Organizations With At Least Sixty Percent (60%) Interest Or Ownership Of At Least 60% Of The Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Business Organizations Of A Country Where The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders From December 19, 2024 To January 3, 2025 Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb. It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps) And The Website Of The Procuring Entity, Provided That Bidders Pay The Applicable Fee For The Bidding Documents Not Later Than The Deadline For Submission Of Bids. Bids Must Be Duly Received By The Bac Secretariat At The Address Below On Or Before January 3, 2025, Until 5:00pm. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In The Pbd. Late Bids Shall Not Be Accepted. On The Last Day For The Submission Of Bids And No Prospective Bidder/s Submitted Its Bid Documents Or Only One (1) Bid Was Submitted For The Above-mentioned Project, The Same Is Deemed Extended Until January 10, 2025, 5:00 Pm. This Is To Protect The Interest Of The University And Full Opportunity For A Competitive Bidding May Be Achieved. The University Likewise Reserves The Right To Cause Extension Or Postponement Of The Filing Of Bids Should Similar Situation Arises. Bid Opening Shall Be On January 6, 2025, 9:00 Am At The Bac Conference Room, Gen. Tinio (st.) Campus, Cabanatuan City Unless Extended. Bids Will Be Opened In The Presence Of The Bidder Or His/her/its Duly Authorized Representative/s. Failure To Attend During The Opening Of Bids Shall Be Considered A Waiver On The Part Of The Bidder Who Likewise Waives His/her/its Right To Raise Questions During The Bidding Procedures. The Nueva Ecija University Of Science And Technology Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. For More Information Concerning This Bidding, Please Contact The Following: Engr. Joel G. De Mesa Head, Bac Secretariat For Goods And Services Neust Gen. Tinio St., Cabanatuan City Email Address: Neust.bacsec@gmail.com Approved By: Dr. Honorato P. Panahon (sgd.) Bac Chairperson

Details: Description:- Conducting Final Location Survey (fls) For Broad Gauge Railway Line Along The Existing line With Consultant's Own Labour, Tools, Plants & Equipment, Materials, Transportation With All Lead and Lifts, Duly Taking All Safety Precautions To Ensure Safety, Using Survey Instruments Like Total stations, Dgps, Auto Levels Etc And Using Mx Rail Software As Per The Scope, Terms Of Reference, relevant Provisions Of Indian Railways Code For Engineering Department (1999, Third Reprint) With Up to Date Correction Slips, Special Conditions Of Tender And As Directed By The Engineer-in-charge, including Topographical Survey For 25metre Corridor On Proposed Alignment Side Of Center Line Of existing Track Or On Both Sides Of Proposed Alignment At Diverted Alignment Or Adequate Width In station Yards As The Case May Be, Taking The Longitudinal Levels At Intervals Of 20 M. & At Obligatory points And Cross Sectional Levels At An Interval Of 5m ( Or Less As Decided By Engineer In Charge As per The Terrain) ( Extra Width To Be Covered At Some Locations As Directed By Engineer -in- Charge), including Staking Of Approved Alignment With Cc Pillars (150x150x900mm Size With 300mm Projected above Ground Level) At An Interval Of 100m And With Wooden Pags ( 50x50x450mrn Size) At Every 20m Where Track Is Not Parallel Or Is Away From The Existing Track By More Than 15 M (cost Of Wooden pags In Inclusive).the Rcc Pillars Shall Also Be Fixed On Curves Indicating Transition Portion, Apex point, Crown Of Curve, Beginning And End Point Of Circular Curves, (5 Locations For Each Curve), At major Bridges Two Posts One On Either Side (payment For Cc Pillars Will Be Made Separately As Per item 2 Of Schedule), Including Submitting List Of Distance And Coordinates Of Centre Line Of Proposed bg Line From Centre Line Of Existing Bg Line At Every 20m Interval. The Rate Also Includes Preparation and Submission Of Report Of Final Location Survey (fls) Printed & Duly Bound (2 Sets) And With Two soft Copy In Cd. Note : Detailed Project Report (dpr) Should Be Prepared As Per Railway Board Letter no. 2022/w-1/gen/dpr Proforma (e-off : 3404238) Dt. 13.12.2023

Details: 16 Gauge Stainless Steel Wire , 18 Gauge Stainless Steel Wire , 24 Gauge Stainless Steel Wire , 26 Gauge Stainless Steel Wire , A. J. Wilcock 0.016 S.s.wire , A. J. Wilcock 0.018 S.s.wire , Addition Silicon Includes The Following , Air Rotar Cartridge For Hand Piece , Alginate Impression Material 500gm , Amalgam Silver Alloy Power , Apf Gel , Applicator Tip , Articulating Paper 100 M , Articulating Paper 40 M , Begg Bracket Curve , Begg Bracket Flat , Bite Block , Bite Block With Tongue Retractor , Bite Registration Paste With Gun , Bondable Molar Tubes , Bone Cutting Burs No. 702 , Bur Trimmer Holder , Burr Holder , Calcium Hydroxide Obturating Material , Catalyst Paste , Ceramic Repair Kit , Cheek Retractor With Wings , Cheek Retractor , Chip Blower With Nozzel , Cold Cure-lab Pack Clear , Composite Polishing Disc Kit , Composite Restoration Kit All Shades , Cotton Holder , Dappen Dish , Dental Floss , Dental Mixing Pad , Dental Stone 1kg , Disc Sand Paper , Dual Impression Tray , Dycal Dental Calcium Hydroxide Composition , Edta Paste For Dentist , Elastic Chain Closed , Elastic Chain Short , Elastic Ligature Module , Elastics Coloured Red 3 , Elastics Coloured Green , Elastomeric Impression Material , Endo Box , Endo Ice , Etching Gel For Composite , Eugenol Liquid , File Reamer Holder Metalic , Formocresol , Fox Plane Metalic , Gas Burner Micro Torch , Gate Drills For Post Core , Gemini 3m Bracket Kit , Gic High Strength Posterior , Glass Slab , Glassix Glass Fibre Composite Posts , Green Stick Compound , Gtr Membrane , Gun For Addition Silicon , Gutta Percha Protaper F1 , Gutta Percha Protaper F2 , Gutta Percha Protaper F3 , Gutta Percha Protaper F4 , Gutta Percha Protaper F5 , Hot Plate Spatula , Impression Compound , Impression Foam Trays , Impression Tray , Impression Trays Fo , Inter Proximal Strip , Intra Canal Dressing Paste , Ligature Spool , Light Cure Composite Kit , Lingual Buttons , Liquid For Gutta Purcha , Matrix Band For Composite , Matrix Band S.s. , Mineral Trioxide Aggregate , Miracle Mix Restoration , Molar Bands With Tubes , Molar Bands With Tubes 33 Lr , Molar Bands With Tubes 33 Ul , Molar Bands With Tubes33 Ur , Molar Bands 33 Ur , Molar Bands 33ll , Molar Bands 34 Lr , Molar Bands 34 Ul , Molar Bands 34 Ur , Molar Bands 34 Ll , Molar Bands 35 Ll , Molar Bands 35 Lr , Molar Bands 35 Ul , Molar Bands 35 Ur , Molar Bands 35ll , Molar Bands 36 Ll , Molar Bands 36 Lr , Molar Bands 36 Ul , Molar Bands 36 Ur , Molar Bands37 Ll , Molar Bands 37 Lr , Molar Bands 37 Ul , Molar Bands 37 Ur , Molar Bands 37 Ll , Molar Bands 38 Ll , Molar Bands 38 Lr , Molar Bands 38 Ul , Molar Bands 38 Ur , Molar Bands39 Ll , Molar Bands 39 Lr , Molar Bands 39 Ul , Molar Bands 39 Ur , Molar Bands 39ll , Molar Bands 40 Ll , Molar Bands 40 Lr , Molar Bands 40 Ul , Molar Bands 40 Ur , Molar Bands 41 Ll , Molar Bands 41 Lr , Molar Bands 41 Ul , Molar Bands 41 Ur , Molar Bands 42 Ll , Molar Bands 42 Lr , Molar Bands 42 Ul , Molar Bands 42 Ur , Niti Wire 0.012l , Niti Wire 0.012u , Niti Wire 0.014 , Niti Wire 0.014u , Niti Wire 0.016l , Niti Wire 0.016u , Niti Wire 0.016 , Non Perforated And Perforated Trays , Open Coil Springs , Open Coil Springs S.s. , Periodontal Bone Graft , Rapid Repair , Resin Luting Cement , Retainer Wires , Rubber Bowl Big , S.s Wire 0.016 X 0.022 U , S.s Wire 0.016 X 0.022u , Teethset A1 , Temporary Crown And Bridge , Transperant Strips , Zinc Oxide Powder , Zoe Mixing Pad

Details: Advertisement For Bids Mei Project No. (3118-13) Acadia Parish Police Jury (herein Referred To As The "owner") Notice Is Hereby Given That Sealed Bids Will Be Received In The Office Of The Acadia Parish Police Jury, Located At 505 N.e. Court Circle, Crowley, Louisiana, Or By Electronic Bid At Www.madereng.com, Until 10:00 O'clock A.m. On Thursday The 9th Day Of January, 2025 For The “old Spanish Trail Reconstruction” For The Acadia Parish Police Jury, And Shall At That Time And Place Be Publicly Opened And Read Aloud. Bids Received After The Above Specified Time For Opening Shall Not Be Considered And Shall Be Returned Unopened To The Sender. The Work Shall Consist Of The Removal Of Approximately 2,000 Linear Feet Of Existing Aggregate Roadway, The Construction Of A New Roadway Base (class Ii Soil Cement) And Asphaltic Concrete Surfacing, Supplemental Drainage Improvements (open Ditch And Subsurface Drainage), And Other Related Improvements. Copies Of Plans And Specifications, Including The Information For Bidders, Form Of Bid Proposal, Form Of Contract, Plans, Specifications, Performance And Payment Bond, And Other Contract Documents May Be Downloaded From The Mader Engineering Plan Room As Hosted By Central Bidding (go To The “planroom” Link Within Www.madereng.com) (subject To Fees And Conditions). This Will Be The Only Method Of Plan Distribution. A Pre-bid Conference May Be Scheduled. If So, It Would Be Mandatory For All Bidders To Attend And Any Firm Not Represented At Such Conference Will Be Disqualified From The Bid Process And Will Not Have Its Bid Opened. Notice Of The Pre-bid Conferences Date, Time, And Location Will Be Provided Via Addendum If Applicable. The Owner Reserves The Right To Reject Any And All Bids For Just Cause. Such Actions Will Be In Accordance With Title 38 Of The Louisiana Revised Statutes. The Acadia Parish Police Jury Reserves The Right To Consider The Bidder’s Past Performance History At This Facility As Well As At Other Similar Facilities, And To Make Such Investigations As Deemed Necessary To Determine The Ability Of The Bidder To Perform The Work. The Acadia Parish Police Jury Also Reserves The Right To Refuse To Issue Plans And Specifications And/or Reject Any Bid If The Evidence Submitted By, Or Investigation Of, Such Bidder Fails To Satisfy The Acadia Parish Police Jury That Such Bidder Is Properly Qualified To Carry Out The Obligations Of The Contract And To Complete The Work Contemplated Therein. Each Bid Shall Be Accompanied By A Certified Check, Cashier's Check, Or Bid Bond Payable To The Acadia Parish Police Jury, The Amount Of Which Shall Be Five Percent (5%) Of The Base Bid Plus Additive Alternates. If A Bid Bond Is Used, It Shall Be Written By A Surety Or Insurance Company Currently On The U.s. Department Of The Treasury Financial Management Service List Of Approved Bonding Companies Which Is Published Annually In The Federal Register, Or By A Louisiana Domiciled Insurance Company With At Least An A-rating In The Latest Printing Of The A.m. Best's Key Rating Guide To Write Individual Bonds Up To Ten Percent Of Policyholders' Surplus As Shown In The A.m. Best's Key Rating Guide, Or By An Insurance Company In Good Standing Licensed To Write Bid Bonds Which Is Either Domiciled In Louisiana Or Owned By Louisiana Residents. The Bid Bond Shall Be Issued By A Company Licensed To Do Business In Louisiana And Countersigned By A Person Who Is Under Contract With The Surety Company Or Bond Issuer As A Licensed Agent In This State And Residing In This State. The Certified Check, Cashier's Check Or Bid Bond Shall Be Given As A Guarantee That The Bidder Shall Execute The Contract, Should It Be Awarded To Him, In Conformity With The Contract Documents Within Ten (10) Days. No Bidder May Withdraw His Bid For At Least Forty-five (45) Days After The Time Scheduled For The Opening Of Bids. Each Bid Shall Be Submitted Only On The Bid Form Provided With The Specifications. The Successful Contractor Will Be Required To Execute Performance And Labor And Material Payment Bonds In The Full Amount Of The Contract As More Fully Defined In The Bid Documents. Bids Will Be Evaluated By The Owner Based On The Lowest Responsible Bid Submitted Which Is Also In Compliance With The Specifications. Contractors Or Contracting Firms Submitting Bids In The Amount Of $50,000.00 Or More Shall Certify That They Are Licensed Contractors Under Chapter 24 Of Title 37 Of The Louisiana Revised Statutes Of 1950 And Show Their License Number On The Front Of The Sealed Envelope In Which Their Bid Is Enclosed. Contractors Shall Be Licensed In Highways, Streets, And Bridge Construction. Bids In The Amount Of $50,000.00 Or More, Not Submitted In Accordance With This Requirement, Shall Be Rejected And Shall Not Be Read. Additional Information Relative To Licensing May Be Obtained From The Louisiana State Licensing Board For Contractors, Baton Rouge, Louisiana. Acadia Parish Police Jury Publish Dates: December 11th, December 18th, And December 25th, 2024

Details: Advertisement For Bids - Notice To Contractors Notice Is Hereby Given That Warren County Board Of Supervisors Will Receive Sealed Bids From Qualified Bidders For The Project Identified As Riverfront Park Site Development Project. The Project Includes Grading, Pavements, Drainage, Site Clearing And Selective Demolition Of A New Park In Warren County, Vicksburg, Ms As Indicated In The Drawings, Specifications, And Other Contract Documents. The Above General Outline Of Features Of Work Does Not In Any Way Limit The Responsibility Of The Contractor To Perform All Work And Furnish All Parts, Labor, Equipment, And Materials Required By The Specifications And The Drawings Referred To Therein. The Contract Time For The Work Included In This Contract Is Two Hundred Seventy (270) Calendar Days. The Contract Will Be Subject To Liquidated Damages Of Three Hundred Fifty Dollars ($350) Per Calendar Day For Each Day In Default After The Stipulated Completion Date. The Contract Time Will Begin On The Date Specified In The Written Notice To Proceed. Deadline For Receipt Of Bids Is 10:00 A.m. Local Time On Wednesday, January 8, 2025. Bids Will Be Received At The Warren County Purchasing Department, 913 Jackson Street, Vicksburg, Ms 39183. Bidders Are Cautioned That The Purchasing Department Does Not Receive The Daily U.s. Mail On Or Before 10:00 A.m. Bids Will Be Time-stamped Upon Receipt According To Purchasing Department’s Time Clock. Bids Received After The Stated Deadline Will Not Be Considered. All Bids Properly Received Will Be Publicly Opened And Read Aloud. Electronic Bids Can Be Submitted At Www.centralbidding.com. Official Bid Documents Can Be Downloaded From Central Bidding. Interested Contractors Can Register As A Vendor At Www.centralbidding.com And Download Plans. Electronic Bids Are Due At The Same Time And Date As Sealed Bids. For Any Questions Relating To The Electronic Bidding Process, Please Call Central Bidding At 225-810-4814. Bidders Must Be Qualified Under Mississippi State Law And Possess A Certificate Of Responsibility Issued By The Mississippi State Board Of Public Contractors In A Classification Such As (a) Highway, Street And Bridge Construction, (b) Municipal And Public Works Construction, (c) Excavation, Grading & Drainage Or Another Closely Related Classification. This Project Is Expected To Exceed $50,000, Therefore The Certificate Of Responsibility Number Shall Be Written On The Outside Of The Sealed Bid Envelope. For Electronic Bids, The Cor Information Must Be Submitted As The First Page Of The Pdf Attachment With The Electronic Bid Submittal. For Bids Less Than $50,000, A Certificate Of Responsibility Number Is Not Required. Bidder Shall Note On The Outside Of The Envelope Containing The Bid That The “bid Is Less Than $50,000, Cr No. Not Required”. Mississippi Has A Reciprocal Preference Law. Mississippi Code 31-3-21 Requires That A Copy Of Any Non-resident Bidder’s Current State Law Pertaining To Its Treatment Of Non-resident Contractors Be Submitted At The Time The Bid Is Submitted, Or That Bid Shall Not Be Considered Further. Each Bidder Must Deposit With His Proposal A Bid Bond Or Certified Check In An Amount Equal To Five Percent (5%) Of The Total Bid Payable To Warren County As Bid Security. The Successful Bidder Shall Furnish A Performance Bond And A Payment Bond Each In The Amount Of 100% Of The Contract Amount Awarded. Bidders Shall Also Submit A Current Financial Statement If Requested By Warren County. Attorneys-in-fact Who Sign Bid Bonds Or Payment Bonds And Performance Bonds Must File With Each Bond A Certified And Effective Dated Copy Of Their Power Of Attorney. Neel-schaffer, Inc. Is The Engineer For This Project. Plans, Specifications, And Contract Documents Are On File And Open To Public Inspection At The Local Neel-schaffer, Inc. Office, 1100 Cherry Street, And At The Warren County Purchasing Department, 913 Jackson Street, Vicksburg, Ms 39183. Contractors May Request Bid Documents By Visiting Www.centralbidding.com And Following The Site Instructions For Registration And Download. Bid Documents May Also Be Picked Up At No Charge At The Neel-schaffer Office Located At 1100 Cherry Street, Vicksburg, Ms 39183. Questions May Be Addressed To Christopher Trebisky, Project Manager Via Chris.trebisky@neel-schaffer.com. The Warren County Board Of Supervisors Reserves The Right To Determine Responsible Bidders, Responsive Bids, The Lowest And Best Bid, Reject Any And All Bids, Award To The Bidder Believed Most Advantageous To Warren County, And To Waive Any Informalities In The Bids And Bidding Process. Published Pursuant To Board Order Dated The 21st Day Of October 2024. Warren County Board Of Supervisors By: Victoria Bell, Purchasing Agent Publication Dates: December 6, 2024 December 13, 2024

Purchaser Name: Hooghly River Bridge Commissioners | Maintenance Of Hrbc Bhavan Six Storied Building With Annex Building Two Storied, Canteen Building 2nd Floor And Three Storied Old Building And Q.c. Building Kolkata For The Year 2024-25