Bridge Tenders

Details: Description Republic Of The Philippines Department Of Public Works And Highways Office Of The District Engineer Catarman, Northern Samar Tel. No.: (055) 500-0559 Invitation To Bid For: 1. The Dpwh Northern Samar 1st District Engineering Office, Catarman, N. Samar, Through Fy 2025 Gaa & Fy 2024 Da Fmr Intends To Apply The Sum Of The Approved Budget For The Contract (abc) Stated Below Being The Abc To Payments Under The Contracts Below. Bids Received In Excess Of The Abc Shall Be Automatically Rejected And Declared Non-complying/failed. 2. The Dpwh – Northern Samar 1st Engineering District Office, Through Its Bids And Awards Committee (bac), Invites Contractors To Submit Bids For The Following Contract/s: 1. Contract Id : 24ih0104 Contract Name : Concreting Of Brgy. San Isidro To Brgy. San Juan Fmr, Brgy. San Isidro And Brgy. San Juan, Lavezares, Northern Samar Contract Location : Lavezares Northern Samar Brief Description/scope Of Work : Construction Of Roads With Total Length Of 0.42 Lane Kilometers (w=2.50m, 230mm Thickness) Which Includes Construction Of Slope Protection Structures On Stone Masonry 228.62 Cu.m. 80 Meters Right Side And 10 Meters Left Side, Rcbc Of 3 Meter Width By 2.4 Meter Height & 2.4m Width By 1.8 Meter Height. Approved Budget For The Contract (abc) : Php 9,949,428.92 Source Of Funds : Fy 2024 Da Fmr Contract Duration : 147 Calendar Days Cost Of Bidding Document : Php 10,000.00 3. Prospective Bidders Should Be (1) Registered With And Classified By The Philippine Contractors Accreditation Board (pcab) With Pcab License Category, For “small B” As Per Pcab Resolution No. 201, Series Of 2017, (b) Completion Of A Single Largest Completed Contract (slcc) Similar To The Contract To Be Bid Costing At Least 50% Of The Abc, And (c) Net Financial Contracting Capacity Source (nfcc) At Least Equal To The Abc. For This Purpose, The Major Categories Of Work Are: 25ih0008 - Bcsdp – Bridges : Construction – Steel (superstructure) – With Driven Piles, 24ih0104 & 24ih0105 - Rcp – Roads: Construction – Pccp Contractor/applicants Who Wish To Participate In This Bidding Are Require To First Register With The Dpwh Civil Works Application (cwa) At The Dpwh Procurement Service (prs), 5th Floor, Dpwh Building, Bonifacio Drive, Port Area, Manila, While Those Already Registered Shall Keep Their Records Current And Updated. The Contractor’s Eligibility To Bid On The Project Will Be Determined Using The Dpwh Contractor Profile Eligibility Process (cpep) And Subject To Further Post-qualification. Information On Registration Can Be Obtained From The Prs During Working Days From 7:00 Am To 4:00 Pm Or At The Dpwh Website Www.dpwh.gov.ph. 4. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (lrr) Of Republic Act 9184 (ra 9184), Otherwise Known As The “government Procurement Reform Act”. The Contract Shall Be Awarded To The Lowest Calculated Responsive Bidder (lcrb) Who Was Determined As Such During Post-qualification. 5. Interested Bidders May Obtain Further Information From The Dpwh Northern Samar 1st District Engineering Office, Catarman, N. Samar And Inspect The Bidding Documents At The Address Given Below From 8:00 A.m. – 5:00 P.m. 6. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On The Dates And From Address/websites Stated Below And Upon Payment Of The Applicable Fee (nonrefundable) For The Bidding Documents, Pursuant To The Latest Guidelines Issued By Gppb, In The Amount Stated Above. Bidders Can Make Payment For The Purchase Of The Bidding Documents At Any Dpwh Field Offices. The Scheduled Of Key Procurement Activities Is Shown Below: Procurement Activity Date / Time Place 1. Issuance / Posting Of Bidding Documents November 15, 2024 – December 5, 2024 @ 1:00 P.m. * Hard Copies At Bac Secretariat, Dpwh – Nsfed, Office, Catarman, N, Samar * Downloadable From (a) Dpwh Website Www.dpwh.gov.ph, (b) Philgeps Website Www.philgeps.gov.ph, And (c) Website Of Concerned Foreign Financing Institution. 2. Pre-bid Conference November 22, 2024 @ 10:00 A.m. At The Bac Office / Conference Room, Dpwh – Northern Samar First Engineering District Office, Catarman, N. Samar *you Can Join The Pre-bid Conference Through [zoom - Meeting Id : 86527944585, Password : 810941 & Https://www.youtube.com/@dpwh.nsamar1deo] 3. Deadline For Receipt / Submission Of Bids December 5, 2024 @ 1:00 P.m. Bac – Dpwh Northern Samar First Engineering District Office, Catarman, N. Samar *you Can Submit Your Bids Through Our Official Electronic Mail (electronicbids_northernsamar1@dpwh.gov.ph) 4. Opening Of Bids (upon Availability Of Eligibility Results) December 5, 2024 Immediately After The Deadline Of Submission Of Bids Bac Office / Conference Room, Dpwh – Northern Samar First Engineering District Office, Catarman, N. Samar *you Can Join The Opening Of Bids Through [zoom - Meeting Id : 86527944585, Password : 810941 & Https://www.youtube.com/@dpwh.nsamar1deo] 7. It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps) And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Fee For The Bidding Documents Not Later That The Submission Of Their Bids. 8. The Pre-bid Conference Will Be Held On Dates Stated Above At Bac Office/ Conference Room, Dpwh Northern Samar 1st District Engineering Office, Catarman, N. Samar And/or Through Videoconferencing/webcasting Via ( Zoom), Which Shall Be Open To Prospective Bidders. Bidding For The Above-mentioned Cy 2025 Projects Shall Be Conducted “short Of Award” Pending Availability/receipt Of Fund Fy 2025. 9. Bid Submission Maybe Done Manually Or Electronically/online. However, Bidders Should Only Select One Mode Of Submission, Either Manual Or Electronic. Similar To Manual Submission, The Guidelines For The Preparation And Submission Of An Electronic Bid Are Contained In The Bds. 10. Bids Must Be Duly Received By The Bac Secretariat At The Address Below For Manual Submission Or At Electronicbids_northernsamar1@dpwh.gov.ph For Electronic Submission On Or Before December 5, 2024 At 1:00 P.m. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 18. 11. Bid Opening Shall Be On December 5, 2024 Immediately After The Deadline Of Submission Of Bids At Bac Office / Conference Room, Dpwh – Northern Samar First Engineering District Office, Catarman, N. Samar. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. Late Bids Shall Not Be Accepted. 12. The Dpwh Northern Samar 1st District Engineering Office, Catarman, N. Samar Reserves The Right To Accept Or Reject Any And All Bids, Declare Failure Of Bidding, Or Not Award The Contract At Any Time Prior To The Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Implementing Rules And Regulations (irr) Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 13. For Further Information, Please Refer To: The Head, Bac Secretariat Bac Office, Dpwh – Nsfed, Catarman, N. Samar Tel. No.: (055) 500-2536 Email Add: Arao.joan_candylou@dpwh.gov.ph Approved: Vicente C. Galecio Bac - Chairman Noted: Alvin A. Ignacio District Engineer Dates Of Dpwh Web/philgeps Posting : November 15 - 21, 2024 Dpwh-nsfdeo Bulletin Board

Details: The subject of this public contract is the reconstruction of the footbridge to the swimming pool in Benešov above Ploučnicí and part of the footpath. The footbridge The footbridge is located in the inner city of Benešov Nad Ploučnicí. The footbridge transfers local traffic connecting Ul. Nadražní A Bezručova Street, Across the Ploučnica River. Construction Will Be Conducted Under Full Closures, All Pedestrian Traffic Will Be Excluded. The Repair of the Existing Building Will Not Lead to New Permanent Occupancies. The Existing Bridge Will Be Dismantled To The Shaft Of The Supports, The Supporting Structure Will Be Demolished. The upper part of the supports will be demolished to the level of the new storage sills. Unused Material Will Be Taken To A Managed Landfill. Existing Stone Abutments Will Be Deeply Injected with Moss. Activated Cement Mixture. New Reinforced Concrete Monolithic Storage Bridges will be Anchored to the Existing Supports. The supporting structure of the new footbridge will be two steel girders with a monolithic slab on the lost formwork. The brick regulatory walls of the watercourse channel (wings of the bridge) will be repaired from local stone to cement mortar and deeply repaired. These wings will connect to the existing watercourse control wall. Watercourse channel in flood hole No. 1 Will be Cleared. Furthermore, only the trough at the Pat Abutments will be cleaned. Sidewalk Existing Tubular Railing Will Be Removed. Retaining Wall Will Be Lowered By Demolition For New Cornice. The surface is swept and blown before the cornice is carried out. The Outer Sides of the Remaining Retaining Walls Will Be Reprofiled to Ground Level. Walkway Between Retaining Walls Will Be Removed Including Base Courses.

Details: Description Orthopedic Equipment 1 Unit Or Bed (operating Room Bed) Specifications: External Size (lxwxh) 1940x480x770-1020 Mm Built-in Kidney Bridge 0-120 Mm Back Plate Up/down 80°/10° Head Plate Up/down 60°/90° Trendelenburg/reverse Trendelenburg 25°/25° Lateral Tilt Left/right 20°/20° Leg Plate Down 90° Patient Weight Capacity 250 Kg X-rays Translucent Optional With Extra Charge C-arm Compatible No Multi-functional Orthopedic Frame Yes 2 Pieces Or Cabinets Glass Door Specifications: 4 Levels Color : White / Light Grey Thinkness: 21 Guage Or 0.8mm Size: W=40cm,l=90cm,h=185cm Material: All Steel Powder Coated Paint Weight: 48kg Paint: Powder Coat Rust-proof 3 Pieces Small Mayo Table Dimension:44.5*42*79.5-131cm Material: Stainless Steel With Tray For Carrying Instruments Height Of Tray Is Adjustable From76cm To130cm 1 Piece Foot Operated Faucet Specifications: Single Cold Water Tap Outlet + Foot Board + Two 1m Hose Hose Type: Basin Faucet; Basin Not Included Style: Contemporary Hot And Cold Handle: Single Handle Surface Treatment: Chrome Style: Single Handle Single Hole Faucet Installation: Single Hole Flexible Hose: 1 Meter Material: Brass Body, Ceramic Size: 1/2" Thread Weight: 840g 1 Set Balkam Frame Specifications: Orthopaedic Bed With Mechanically Operated Back Rest & Knee Rest By Crank Mechanism. Size: 2140 × 940 × 500 Mm. Epoxy Coated Frame Work With Beautiful Abs Panels. 4 Section Perforated Top. Balkan Frame (made Of Aluminium) With Monkey Bars And Monkey Chains. Collapsible Side Railings. Four Swivel Castor (all With Individual Brakes). Provision For I.v. Rod. Freight Saving Knock-down Construction. 6 Pieces Bed Linens With School Logo Flat,fitted With Pillowcase White, Good Quality Fabric With Git Logo 6 Pieces Pillow Material: Polyester Fiberfill, Cotton Dimension (l X W) 46cmx 71cm 2 Sets Or Gown Free Size Operating Room Gown Head Cap Cotton Ribbed Cuffs Wash And Wear Cotton Material 3 Pieces Patient Gown Free Size Patient’s Gown Back Tie, Open Back Wash And Wear Cotton Material 2 Units Instrument Trolley Stainless Steel Two Shelves Size: 20"w X 48" X 34"h 7 Pieces Kelly Hemostatic Forceps-curved Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 7 Pieces Kelly Hemostatic Forceps-straight Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 4 Pieces Mayo Scissor-straight Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 2 Pieces Metzenbaum Scissors-curved Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 4 Pieces Mosquito Forceps-curved Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 4 Pieces Mosquito Forceps-straight Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 4 Pieces Needle Holder Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 2 Pieces Scalpel Handle No. 3 Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 2 Pieces Scalpel Handle No. 4 Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 1 Piece Skin Retractor Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 3 Pieces Tissue Forceps (125 Mm) Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 2 Pieces Thumb Forceps Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 2 Pieces Instrument / Mayo Table Dimension:44.5*42*79.5-131cm Made Of Stainless Steel,which Is Reliable,smooth And Elegant With Tray For Carrying Instruments Height Of Tray Is Adjustable From76cm To130cm 3 Tanks Medical Oxygen Tank (big) (20lbs) 20 Lbs Oxygen Tank 4 Pieces Towel Clamp Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 1 Piece Army-navy Retractor Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 1 Piece Richardson Retractor-double-end Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 1 Piece Self-retraining Retractor (balfour) Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 4 Pieces Halsted Mosquito Forceps-straight Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 1 Piece Mixter-curved Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 1 Piece Mayo Scissor-curved Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 1 Piece Periosteal Elevator Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 1 Piece Bone Chisel/osteotome Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 1 Piece Bone Mallet Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 1 Piece Bone Rongeur Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 1 Piece Bone Holder Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 7 Pieces Twist Drill/drill Bits 100mm-115 Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 1 Piece Gigli Saw (handle And Wire, 500 Mm) Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 1 Piece Pin / Wire Cutter Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 1 Piece Pin / Wire Puller Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 1 Piece Bonecurette Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 1 Piece Cast Spreader Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 1 Piece Bone Clamp Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 1 Piece Screw Driver (flat Screw Driver For Upper Limb) Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 1 Tank Oxygen Unit 20 Lbs Oxygen Tank 1 Piece Rechargeable Emergency Light Specifications: 2 Head (17 Hours, 24pcs Bright Led) 220-240v Ac 50/60hz 6v 4.5ah Sealed Lead Acid Battery 20.24 Hours Charge Time <0.1 Second Response Time Dimensions : 31 X 812x 31.5cm 2 Units Sphygmomanometer, Non-mercurial-adult Cuff Specifications: Standard Cotton Cuff, Non-stop Pin Manometer 2-tube Adult Size Bladder, Standard Latex Bulb Air-release Valve With Spring, Standard End Valve Manometer : 20-300mmhg Accuracy : ±3mmhg Air System : Velcro Cuff With Weight : 430 G 2 Units Sphygmomanometer, Non-mercurial-pediatric Cuff Specifications: Standard Cotton Cuff, Non-stop Pin Manometer 2-tube Adult Size Bladder, Standard Latex Bulb Air-release Valve With Spring, Standard End Valve Manometer : 20-300mmhg Accuracy : ±3mmhg Air System : Velcro Cuff With Weight : 430 G 1 Piece Thermometer, Non-mercurial-oral Accuracy ±0.1/0.1 Power Supply 1 X Ag3lr41 Battery(included) Measuring Range 32~44/89.6~111.2 Specifications: Material: Abs, Silicone (bpa Free) 1 Piece Thermometer, Non-mercurial-rectal Accuracy ±0.1/0.1 Power Supply 1 X Ag3lr41 Battery(included) Measuring Range 32~44/89.6~111.2 Specifications: Material: Abs, Silicone (bpa Free) 1 Unit Bag Valve Mask Unit (adult) Specifications: Includes Reusable Oxygen Reservoir Bag, Silicon Mask, Oxygen Tubing, And A Plastic Container Powerful, Patient-oriented, And User-friendly Ergonomic, Lightweight Design To Decrease Fatigue During Extended Ventilation Recoils Quickly To Allow Rapid Ventilation Low Valve Resistance For Thorough Airflow Hygienic & Transparent 1 Unit Bag Valve Mask Unit (pediatric) Specifications: Includes Reusable Oxygen Reservoir Bag, Silicon Mask, Oxygen Tubing, And A Plastic Container Powerful, Patient-oriented, And User-friendly Ergonomic, Lightweight Design To Decrease Fatigue During Extended Ventilation Recoils Quickly To Allow Rapid Ventilation Low Valve Resistance For Thorough Airflow Hygienic & Transparent 1 Set Bassinet Stainless Baby Bassinet With Acrylic Neonatal Crib, And Mattress. 1 Set Dilatation/curette Set Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 1 Piece Uterine Sound/hysterometer Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 1 Piece Uterine Forceps Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 1 Piece Dull Uterine Curette (300x5, Sharp) Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 1 Piece Sharp Uterine Curette Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 1 Piece Vaginal Retractor Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 1 Piece Vaginal Speculum Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 1 Piece Ovum Forceps Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 1 Set Hegars Dilator, Graduated Sizes Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 1 Piece Sponge Forceps Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 1 Piece Metzenbaum Scissor-straight Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 2 Units Emergency Cart Specifications: 1 Lumination (adjustable):60,000-180,000lux Bulbs Quantity:80pcs Bulbs Type:led Average Bulb Life:≥80,000h Color Temperature(adjustable):3700k ~5000k Display Index (adjustable):85~98 Focus Depth:≥1200mm Spot Diameter: 160-280mm(adjustable) Bright Adjustment: 1%-100% The Surgeon's Head Heats Up:<1°c Voltage:ac100-240v 50/60hz 1 Piece Kelly Pad Washable And Can Be Sterilized Size: 50x110cm (tube Dia X Overall Length) Material: Rubber 1 Piece Sphygmomanometer Non-mercurial Specifications: Standard Cotton Cuff, Non-stop Pin Manometer 2-tube Adult Size Bladder, Standard Latex Bulb Air-release Valve With Spring, Standard End Valve Manometer : 20-300mmhg Accuracy : ±3mmhg Air System : Velcro Cuff With Weight : 430 G 3 Pieces Stethoscope Specification: Double Dual Head (diaphragm And Bell) Latex Free, Hypo-allergenic, Y Rubber Tube (28 Inches) Non-chill Rim And Diaphragm Ergonomically Designed Headset Snap Tight Soft-sealing Eartips 1 Unit Clinical Height And Weight Scale Specifications: Capacity: 400 Lb X 4 Oz / 180 Kg X 100 G Height Rod: 20- 78in / 76-198cm Platform Size: 10.5” W X 14.5”d/ 27cm W X 37cm D Scale Height: 59”/150cm Weigh Beam- Dual Reading, Die-cast Beam 1 Set Eent Diagnostic Set With Ophthalmoscope And Otoscope Specifications: Fibre Optic-opthalmoscope Otoscope Head With Standard Handle Removable Magnifying Kit Set 2.5v Led Light With Long Life Bulb / Gives Bright Cool Light Grey Plastic Hard Case Irrigation Access For Minor Operation 3 Units Mechanical/patient Bed With Lock, If Wheeled; With Guard Or Side Rails Specifications: Bed Material: Spraying Steel Structure+abs Headboard Bed Size:2100*970*480mm With Mattress Topper Mattress Topper Material:waterproof Oxford Cloth Cover Mattress Topper Innercore: Coconutplam+high Density Sponge Mattress Topper Size:1920*840*80mm With 12mm Bread Wheel With Brake Three Rocker System Adjustment Lifting Weight:65kg Load-bearing: 180kg 5 Units Bedside Table Specifications: Length: 18.70" (47.5cm) Width: 18.70" (47.5cm) Hieght: 29.50" (75.0cm) Abs Engineering Plastic Material With One Food Board, One Drawer, One Small Door (inner With One Shelf Board) Tower Shelf In Lateral Side, Can Be Hiding With Dia.50mm Castors (4) 1 Unit Nebulizer Specifications: Reliable Piston Compressor Effective Medication Delivery One-button Operation Powerful Compressor And Nebulizer Kit Safety Fuse, Auto Off Anti-dry Lightweight And Compact 1 Piece Neurologic Hammer Size: 18cm Color: Black Material: Pvc, Zinc Alloy 1 Piece Thermometer-oral Accuracy ±0.1/0.1 Power Supply 1 X Ag3lr41 Battery(included) Measuring Range 32~44/89.6~111.2 Specifications: Material: Abs, Silicone (bpa Free) 1 Piece Thermometer-rectal Accuracy ±0.1/0.1 Power Supply 1 X Ag3lr41 Battery(included) Measuring Range 32~44/89.6~111.2 Specifications: Material: Abs, Silicone (bpa Free)

Details: The Road Administration hereby offers the construction of land fills and sea defenses due to the new construction of a bridge over Fossvogr. The work is part of the 1st batch of Borgarliín and development for the development area in Skerjafjörður. Land filling shall be done on both sides of Fossvogr. On the Reykjavík side, the work includes the construction of about 2 ha of land filling and 740 m of sea defense outside the current coastline from Skerjafjörður in the north-west to Kýrhamr in the north-east. In Kársnes, the work includes the construction of about 0.3 ha of land fills outside the existing coastline with 220 m of new sea defense together with about 0.4 ha of fills on land. The work is a joint project of the Road Administration, the City of Reykjavík and Kópavogur City.

Details: Description The City Government Of Davao Now Invites Bidders For The Projects Under Batch 13-2024 As Listed Below. The Prospective Bidder Must Have Completed A Single Largest Contract Cost (slcc) That Is Similar To The Contract To Be Bid, And Whose Value, Adjusted To Current Prices Using The Psa Consumer Price Indices, Must Be At Least Fifty Percent (50%) Of The Abc To Be Bid: Provided, However, That Contractors Under Small A And B Categories Without Similar Experience On The Contract To Bid May Be Allowed To Bid If The Cost Of Such Contract Is Not More Than The Allowable Range Of Contract Cost (arcc) Of Their Registration Based On The Guidelines As Prescribed By The Pcab And Section 23.4.2.4 Of The 2016 Revised Irr Of Ra 9184 Updated As Of April 15, 2024. Moreover, A Contract Shall Be Considered "similar" To The Contract To The Bid If It Has The Same Major Categories Of Work. B13-2024-01 Project Title: Road Opening With Concreting Located At Purok Pag-ibig, Purok Salome, Purok Masaya To Purok Pagbabago, Brgy. Saloy, Calinan District (phase 2) Source Of Fund: Adf, Cy 2024 (24102) Approved Budget For The Contract: Php 160,000,000.00 Project Duration: 540 Calendar Days Pcab License: Road Medium B Cost Of Tender Documents: Php 50,000.00 Minimum Equipment Requirements: 1 Unit Hydraulic Excavator (0.80 Cu.m) 1 Unit Concrete Mixer (1-bagger) 1 Unit Bulldozer, D6h Series Ii Psds/dd 1 Unit Concrete Vibrator 1 Unit Motorized Road Grader (140hp), G710a 1 Unit Concrete Saw 1 Unit Vibratory Roller (10mt), Sd100dc 1 Unit Handroller Vibratory 1 Unit Dumptruck 5 Cu.m. Cap. 1 Unit Bar Cutter 1 Unit Hydraulic Excavator (0.80 Cu.m) W/ Breaker 2 Units Chainsaw 1 Unit Boomtruck 1 Unit Water Truck 1 Unit Payloader 1 Unit Tm Crane 86 Units Steel Forms 1 Unit Generator Set 1 Unit Vibratory Hammer B13-2024-02 Project Title: Construction Of Farm To Market Road From Purok 8 Gulansing To Sitio Kinse-kinse Proper, Brgy. Salapawan, Paquibato District Source Of Fund: Adf Cy 2024 (24094) Approved Budget For The Contract: Php 130,000,000.00 Project Duration: 540 Calendar Days Pcab License: Road Medium A Cost Of Tender Documents: Php 50,000.00 Minimum Equipment Requirements: 1 Unit Hydraulic Excavator (0.80 Cu.m) 1 Unit Payloader 1 Unit Bulldozer, D6h Series Ii Psds/dd 88 Units Steel Forms 1 Unit Motorized Road Grader (140hp), G710a 1 Unit Concrete Mixer (1-bagger) 1 Unit Vibratory Roller (10mt), Sd100dc 1 Unit Concrete Vibrator 1 Unit Hydraulic Excavator (0.80 Cu.m) W/ Breaker 1 Unit Concrete Saw 1 Unit Dumptruck 5 Cu.m. Cap. 1 Unit Handroller Vibratory 1 Unit Dumptruck 10 Cu.m Cap. 1 Unit Bar Cutter 1 Unit Boomtruck B13-2024-03 Project Title: Road Concreting With Drainage System From P-8 Puting Bato To Sitio Namnam, Brgy. Baganihan, Marilog District (with 2 Bridge Component) Source Of Fund: Adf , Cy 2024 (24104) Approved Budget For The Contract: Php 65,000,000.00 Project Duration: 300 Calendar Days Pcab License: Road/ Flood Control Medium A Cost Of Tender Documents: Php 50,000.00 Minimum Equipment Requirements: 88 Units Steel Forms 1 Unit Water Truck 1 Unit Bulldozer, D6h Series Ii Psds/dd 2 Units Concrete Mixer (1-bagger) 1 Unit Hydraulic Excavator (0.8 Cu.m) 1 Unit Concrete Vibrator 1 Unit Motorized Road Grader (140hp), G710a 1 Unit Concrete Saw 1 Unit Vibratory Roller (10mt), Sd100dc 1 Unit Handroller Vibratory 2 Units Dumptruck (12 Cu.yd) 1 Unit Bar Cutter 1 Units Payloader (1.5 Cu. M) B13-2024-04 Project Title: Road Concreting And Drainage System At Purok 1-c, Brgy. Talomo River, Calinan District Source Of Fund: Df, Sb1, Cy 2023 (23250) Approved Budget For The Contract: Php 30,000,000.00 Project Duration: 240 Calendar Days Pcab License: Road/ Flood Control Medium A Cost Of Tender Documents: Php 25,000.00 Minimum Equipment Requirements: 1 Unit Jackhammer W/ Air Compressor 1 Unit Handroller 1 Unit Dumptruck 5 Cu.m. 1 Unit Concrete Vibrator 1 Unit Backhoe Pc - 60 1 Unit Concrete Saw 1 Unit 10w Dumptruck 1 Unit Bar Cutter 1 Unit Road Grader 88 Units Steel Forms 1 Unit Road Roller 1 Unit One Bagger Concrete Mixer 1 Unit Payloader B13-2024-05 Project Title:construction Of Farm To Market Road At Purok Olaniag To Purok Kibilog, Brgy. Mapula, Paquibato District (phase 3) Source Of Fund: Adf Cy2024 (24095) Approved Budget For The Contract: Php 24,000,000.00 Project Duration: 300 Calendar Days Pcab License: Road Small B Cost Of Tender Documents: Php 25,000.00 Minimum Equipment Requirements: 1 Unit Dumptruck 5 Cu.m. Cap. 1 Unit Water Truck/pump (16000l) 1 Unit Chainsaw 2 Units Handroller 2t Vibratory 1 Unit Hydraulic Backhoe (0.80 Cu.m.) 2 Units Concrete Vibrator 1 Unit Bulldozer, D6h Series Ii Psds/dd 2 Units Concrete Saw 1 Unit Dumptruck (12 Cu.yd) 2 Units Bar Cutter 1 Unit Backhoe Pc-60 176 Units Steel Forms 1 Unit Motorized Road Grader (140hp), G710a 1 Unit Concrete Mixer (one Bagger) 1 Unit Vibratory Roller (10mt), Sd100dc B13-2024-06 Project Title: Road Concreting At Purok 4 Sitio Magsaysay, Brgy. Catigan, Toril District Source Of Fund: Df, Sb No. 1, Cy 2024 (24199) Approved Budget For The Contract: Php 17,000,000.00 Project Duration: 180 Calendar Days Pcab License: Road Small B Cost Of Tender Documents: Php 25,000.00 Minimum Equipment Requirements: 2 Units Backhoe Pc-30 1 Unit Handroller, 2t, Vibratory 2 Units Dumptruck 5 Cu.m. Cap. 1 Unit Concrete Vibrator 1 Unit Road Grader 1 Unit Concrete Saw 1 Unit Road Roller, Vibratory 4 Units Bar Cutter 1 Unit Mini Dumptruck 102 Units Steel Forms 1 Unit Water Truck/pump (16000l) 1 Unit One Bagger Concrete Mixer B13-2024-07 Project Title: Construction Of Wastewater Treatment Facility For Marilog District Hospital, Brgy. Marilog Proper, Marilog District Source Of Fund: Adf Cy 2024 (24132) Approved Budget For The Contract: Php 15,000,000.00 Project Duration: 180 Calendar Days Pcab License: Gb-3 Water Treatment Plant & System Small B Cost Of Tender Documents: Php 25,000.00 Minimum Equipment Requirements: 1 Unit Backhoe Pc-30 1 Unit Cut-off Machine 1 Unit Mini Dump Truck 1 Unit Concrete Mixer ( 1-bagger) 1 Unit Plate Compactor 8 Units H-frame With Cross Bracing & Joint Pin 1 Unit Concrete Vibrator 2 Units Welding Machine 1 Unit Pumpcrete 2 Units Electric Grinder B13-2024-08 Project Title: Road Construction At Purok 1, Purok 2 And Purok 9, Brgy. Buda, Marilog District (phase 1) Source Of Fund: Df, Sb No. 1, Cy 2024 (24196) Approved Budget For The Contract: Php 14,250,000.00 Project Duration: 120 Calendar Days Pcab License: Road Small B Cost Of Tender Documents: Php 25,000.00 Minimum Equipment Requirements: 1 Unit Backhoe Pc-60 1 Unit Water Truck 1 Unit Bulldozer 1 Unit Concrete Vibrator 1 Unit Hydraulic Excavator (crawler) 1 Unit Concrete Saw 1 Unit Road Grader 84 Units Steel Forms 1 Unit Road Roller 1 Unit One Bagger Concrete Mixer 2 Units Dump Truck 1 Unit Electric Drill 1 Unit Chainsaw 1 Unit Bar Cutter 2 Units Payloader (1.50 Cu.m.) B13-2024-09 Project Title: Construction Of Perimeter Fence At Tagakpan Elementary School, Purok San Francisco, Tagakpan, Tugbok District, Davao City Source Of Fund: Sef 2024 (3321-a) Approved Budget For The Contract: Php 9,500,000.00 Project Duration: 240 Calendar Days Pcab License: Building Small B Cost Of Tender Documents: Php10,000.00 Minimum Equipment Requirements: 1 Unit Backhoe Pc – 35 1 Unit Concrete Vibrator 1 Unit Chainsaw 2 Units Bar/shear Cutter 1 Unit Dumptruck 1 Unit Electric Grinder 2 Units Jackhammer With Air Compressor 4 Units Welding Machine 1 Unit One Bagger Concrete Mixer 4 Units Cut-off Machine B13-2024-10 Project Title: Construction Of Bleachers With Canopy At Wangan Elementary School, Brgy. Wangan, Calinan District Source Of Fund: Df, Sb No. 1, Cy 2024 (24186) Approved Budget For The Contract: Php 7,500,000.00 Project Duration: 180 Calendar Days Pcab License: Building Small B Cost Of Tender Documents: Php 10,000.00 Minimum Equipment Requirements: 1 Unit Backhoe Pc-60 W/ Breaker 1 Unit Cargo Stake Truck 1 Unit Plate Compactor 1 Unit Dumptruck 1 Unit Walk-behind Compactor 1 Unit Steel Bar Bender 2 Units One-bagger Concrete Mixer 2 Units Welding Machine 2 Units Bar/shear Cutter 1 Unit Boom W/ Chainblock 2 Units Electric Grinder 1 Unit Oxy-actylene Cuttiing Outfit 2 Units Electric Handrill 2 Units Cut Off Machine 2 Units Tile Cutter B13-2024-11 Project Title: Construction Of Multipurpose Building At Purok 4, Brgy. San Isidro, Bunawan District Source Of Fund: Df, Sb No. 1, 2024 (24206) Approved Budget For The Contract: Php 4,000,000.00 Project Duration: 150 Calendar Days Pcab License: Building Small B Cost Of Tender Documents: Php 5,000.00 Minimum Equipment Requirements: 1 Unit Jackhammer With Air Compressor 2 Units Welding Machine 1 Unit Mini Dumptruck 1 Unit Cut Off Machine 1 Unit Backhoe Pc-30 1 Unit Electric Grinder 1 Unit Plate Compactor 2 Units Electric Drill 1 Unit One Bagger Mixer 2 Units Riveter 1 Unit Concrete Vibrator 2 Units Tile Cutter 2 Units Bar/shear Cutter 6 Units H-frame W/cross Bracing And Joint Pin B13-2024-12 Project Title: Construction Of Mini Green Park With Solar Lights And Drainage System Along Bonifacio-mabini-aurora Junctions, Brgy. 33-d, Poblacion District Source Of Fund: Df, Sb No. 1, Cy2023 (23269) Approved Budget For The Contract: Php 3,450,000.00 Project Duration: 120 Calendar Days Pcab License: Gb-4 Playground Or Recreational Work/ Electrical Works/ Flood Control Small B Cost Of Tender Documents: Php 5,000.00 Minimum Equipment Requirements: 2 Units Bar/shear Cutter 1 Unit One Bagger Concrete Mixer 1 Unit Boom Truck 1 Unit Plate Compactor 1 Unit Concrete Vibrator 1 Unit Tile Cutter 1 Unit Electric Grinder 1 Unit Welding Machine 1 Unit Mini-dumptruck B13-2024-13 Project Title: Installation Of Solar Street Lights At Purok 8 And 9 Duha, San Rafael, Brgy. 10-a, Poblacion District Source Of Fund: Adf Cy 2024 (24057) Approved Budget For The Contract: Php 4,000,000.00 Project Duration: 60 Calendar Days Pcab License: Electrical Works Small B Cost Of Tender Documents: Php 5,000.00 Minimum Equipment Requirements: 1 Unit Concrete Mixer 1 Unit Jackhammer With Generator Set 1 Unit Concrete Vibrator 1 Unit Boom Truck B13-2024-14 Project Title: Construction Of Concrete Pathway With Drainage At Subasta Elementary School, Brgy. Subasta, Calinan District Source Of Fund: Df, Sb No. 1, Cy 2024 (24184) Approved Budget For The Contract: Php 3,600,000.00 Project Duration: 120 Calendar Days Pcab License: Road/ Flood Control Small B Cost Of Tender Documents: Php 5,000.00 Minimum Equipment Requirements: 1 Unit Cargo Stake Truck/low Bed Truck 1 Unit Concrete Saw 1 Unit Jack Hammer With Air Compressor 1 Unit Concrete Vibrator 1 Unit Dumptruck 5 Cu.m. Cap. 1 Unit Steel Forms 1 Unit Backhoe (pc-60) 1 Unit Bar Cutter 1 Unit Hand Roller B13-2024-15 Project Title: Completion Of Multipurpose Building At Megkawayan Elementary School, Brgy. Megkawayan, Calinan District, Davao City Source Of Fund: Sef Cy 2024 (3321-a) Approved Budget For The Contract: Php 2,000,000.00 Project Duration: 60 Calendar Days Pcab License: Building Small B Cost Of Tender Documents: Php 5,000.00 Minimum Equipment Requirements: 1 Unit One-bagger Concrete Mixer 2 Units Electric Grinder 1 Unit Concrete Vibrator 1 Unit Welding Machine 1 Unit Bar/shear Cutter 1 Unit Cut-off Machine 12 Units H-frame With Cross Bracing & Joint Pin 4 Units Tile Cutter 2 Units Electric Handrill Procurement Activity Schedule A. Issuance Of Bidding Documents November 6 To 27, 2024 8:00 Am To 5:00 Pm Bac Secretariat For Civil Works (excluding Saturdays, Sundays & Holidays) B. Pre-bid Conference November 13, 2024, 10:30 Am Virtual Meeting Through Zoom C. Deadline Of Submission And Receipt Of Bids November 27, 2024, 9:00 Am Bac Conference Room, Ground Floor, City Hall, Davao City D. Opening Of Bids November 27, 2024, 10:30 Am Virtual Meeting Through Zoom (sgd) Atty. Joseph Dominic S. Felizarta, Ce Bac Chairman

Details: Description Bids And Awards Committee Iloilo Provincial Government Procurement Of Musical Instruments And Apparatus Bid No. Ppo-24-1897-b Philippine Bidding Documents Sixth Edition July 2020 Table Of Contents Section I. Invitation To Bid……………………………………………………..3 Section Ii. Instructions To Bidders………………………………………..…...5 1. Scope Of Bid ………………………………………………………………………. 5 2. Funding Information………………………………………………………………. 5 3. Bidding Requirements ……………………………………………………………. 5 4. Corrupt, Fraudulent, Collusive, And Coercive Practices 5 5. Eligible Bidders…………………………………………………………………… 5 6. Origin Of Goods ………………………………………………………………….. 6 7. Subcontracts ……………………………………………………………………… 6 8. Pre-bid Conference ………………………………………………………………. 7 9. Clarification And Amendment Of Bidding Documents …………………………… 7 10. Documents Comprising The Bid: Eligibility And Technical Components …………. 7 11. Documents Comprising The Bid: Financial Component …………………………... 7 12. Bid Prices …………………………………………………………………………. 8 13. Bid And Payment Currencies ……………………………………………………… 8 14. Bid Security ………………………………………………………………………. 8 15. Sealing And Marking Of Bids ……………………………………………………… 9 16. Deadline For Submission Of Bids …………………………………………………. 9 17. Opening And Preliminary Examination Of Bids ………………………………….. 9 18. Domestic Preference ……………………………………………………………… 9 19. Detailed Evaluation And Comparison Of Bids ……………………………………. 9 20. Post-qualification ………………………………………………………………… 10 21. Signing Of The Contract …………………………………………………………… 10 Section Iii. Bid Data Sheet …………………………………………………..11 Section Iv. General Conditions Of Contract ……………………...………..12 1. Scope Of Contract ………………………………………………………………… 12 2. Advance Payment And Terms Of Payment ……………………………………….. 12 3. Performance Security ……………………………………………………………. 12 4. Inspection And Tests ……………………………………………………………… 12 5. Warranty …………………………………………………………………………. 13 6. Liability Of The Supplier ………………………………………………………….. 13 Section V. Special Conditions Of Contract ………………………………….14 Section Vi. Schedule Of Requirements ……………………………………....16 Section Vii. Technical Specifications …………………………………………17 Section Viii. Checklist Of Technical And Financial Documents …………..19 Section I. Invitation To Bid Purchase Of Musical Instruments And Apparatus Bid No. Ppo-24-1897-b 1. The Iloilo Provincial Government Through Supplemental Budget No. 1, Cy 2024 (sef) Intends To Apply The Sum Of Four Hundred Sixty Five Thousand Pesos (₱465,000.00) Being The Abc To Payments Under The Contract For The Purchase Of Musical Instruments And Apparatus. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Iloilo Provincial Government Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required By 30 Days Upon Receipt Of Notice To Proceed. Bidders Should Have Completed, Within Three (3) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From The Bids And Awards Committee Secretariat Of The Iloilo Provincial Government And Inspect The Bidding Documents At The Address Given Below During 8:00 A.m. To 5:00 P.m. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 20, 2024 From The Given Address And Website(s) Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Five Hundred Pesos (₱ 500.00). The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person. 6. The Iloilo Provincial Government Will Hold A Pre-bid Conference On November 27, 2024 At The 5th Floor, Bids And Awards Committee Secretariat Office, Iloilo Provincial Capitol, Bonifacio Drive, Iloilo City And/or Through Video Conferencing Or Webcasting, Upon Request At Least Three (3) Days Before The Pre-bid Conference, Via Zoom Or Other Videoconferencing Portals, Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The 5th Floor, Bids And Awards Committee Secretariat Office, Iloilo Provincial Capitol, Bonifacio Drive, Iloilo City On Or Before December 11, 2024 At 9:00 A.m. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On December 11, 2024 At 9:01 A.m. At The 5th Floor, Bids And Awards Committee Secretariat Office, Iloilo Provincial Capitol, Bonifacio Drive, Iloilo City. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. A. The Participating Bidder/supplier Or Its Authorized Representative Must Indicate In Any Of The Eligibility Documents, An Email Address Or A Working Fax Number. The Absence Of Which Shall Be A Ground For Disqualification. Notice To The Bidder/supplier Through The Use Of Either Of These Means (email/fax) Is Considered Sufficient Notice. The Date Of Filing Of Reconsideration And All Communications With The Bac Shall Be Its (bac) Date Of Receipt. B. The Bidder(s)/awardee(s) Or Its Authorized Representative Must Conform To The Notice Of Award Within Three (3) Calendar Days From Receipt Of Such Notice And The Winning Bidder Shall Post The Required Performance Security And Enter Into Contract With The Procuring Entity Within Ten (10) Calendar Days From Receipt By The Winning Bidder Of The Notice Of Award In Accordance With Section 37.2.1 Of The Revised Irr Of R.a. No. 9184. C. The Bidder/supplier Must Have No Pending Unaccepted Notice To Proceed Three (3) Days From The Date Of Acceptance And Signing Of The Purchase Order. Otherwise, It Shall Be A Ground For Disqualification And The Bidder Will Be Rated "failed" During The Preliminary Examination Of Bids And/or Its Bid Shall Be Declared As "non-responsive" During Post-qualification. D. The Bidder/supplier Must Have No Notice Of Award Pending Its Conformity Three (3) Days From The Date Of Its Receipt Of The Notice Of Award. Otherwise, It Shall Be Aground For Disqualification And The Bidder Will Be Rated "failed" During The Preliminary Examination Of Bids And/or Its Bid Shall Be Declared As "non-responsive" During Post-qualification. E. The Bidder/supplier Shall Submit A List Of All Its Ongoing And Completed Projects With The Iloilo Provincial Government Indicating The Delivery Periods And Accomplishments Of Such Projects. F. The Bidder/supplier At The Time Of The Bidding Must Have No Pending Unposted Performance Or Warranty Security, As The Case May Be, Beyond The Period Allowed In The Notice Of Award. Otherwise, It Shall Be A Ground For Disqualification And The Bidder Will Be Rated "failed" During The Preliminary Examination Of Bids And/or Its Bid Shall Be Declared As "non-responsive" During Post-qualification. G. When An Occurrence Of A Tie Among Bidders Takes Place, I.e., Two Or More Of The Bidders Are Determined And Declared As The Lowest Calculated And Responsive Bidder (lcrb), The Winning Bidder Shall Be Determined By Draw Lots Upon Notice To The Bidders Concerned And/or Their Authorized Representatives In Accordance With The Relevant Circulars Issued By The Government Procurement Policy Board (gppb). 11. The Iloilo Provincial Government Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. For Further Information, Please Refer To: Atty. Raemman M. Lagrada Bac Secretariat Head 5th Floor, Bids And Awards Committee Iloilo Provincial Capitol Email Address: Ipg_bacs@yahoo.com Website: Iloilo.gov.ph Telephone Number: (033) 336-0736 13. You May Visit The Following Websites For Downloading Of Bidding Documents: Ipg.gov.ph And/or Philgeps.com November 18, 2024 Atty. Dennis T. Ventilacion Chairperson, Bids And Awards Committee Section Ii. Instructions To Bidders 1. Scope Of Bid The Procuring Entity, Iloilo Provincial Government Wishes To Receive Bids For The Purchase Of Musical Instruments And Apparatus With Bid No. Ppo-24-1897-b. The Procurement Project (referred To Herein As “project”) Is Composed Of Six (6) Items, The Details Of Which Are Described In Section Vii (technical Specifications). 2. Funding Information 2.1. The Gop Through The Source Of Funding As Indicated Below For 2024 In The Amount Of Four Hundred Sixty Five Thousand Pesos (₱ 465,000.00). 2.2. The Source Of Funding Is: A. Lgus, The Annual Or Supplemental Budget, As Approved By The Sanggunian. 3. Bidding Requirements The Bidding For The Project Shall Be Governed By All The Provisions Of Ra No. 9184 And Its 2016 Revised Irr, Including Its Generic Procurement Manuals And Associated Policies, Rules And Regulations As The Primary Source Thereof, While The Herein Clauses Shall Serve As The Secondary Source Thereof. Any Amendments Made To The Irr And Other Gppb Issuances Shall Be Applicable Only To The Ongoing Posting, Advertisement, Or Ib By The Bac Through The Issuance Of A Supplemental Or Bid Bulletin. The Bidder, By The Act Of Submitting Its Bid, Shall Be Deemed To Have Verified And Accepted The General Requirements Of This Project, Including Other Factors That May Affect The Cost, Duration And Execution Or Implementation Of The Contract, Project, Or Work And Examine All Instructions, Forms, Terms, And Project Requirements In The Bidding Documents. 4. Corrupt, Fraudulent, Collusive, And Coercive Practices The Procuring Entity, As Well As The Bidders And Suppliers, Shall Observe The Highest Standard Of Ethics During The Procurement And Execution Of The Contract. They Or Through An Agent Shall Not Engage In Corrupt, Fraudulent, Collusive, Coercive, And Obstructive Practices Defined Under Annex “i” Of The 2016 Revised Irr Of Ra No. 9184 Or Other Integrity Violations In Competing For The Project. 5. Eligible Bidders 5.1. Only Bids Of Bidders Found To Be Legally, Technically, And Financially Capable Will Be Evaluated. 5.2. A. Foreign Ownership Exceeding Those Allowed Under The Rules May Participate Pursuant To: I. When A Treaty Or International Or Executive Agreement As Provided In Section 4 Of The Ra No. 9184 And Its 2016 Revised Irr Allow Foreign Bidders To Participate; Ii. Citizens, Corporations, Or Associations Of A Country, Included In The List Issued By The Gppb, The Laws Or Regulations Of Which Grant Reciprocal Rights Or Privileges To Citizens, Corporations, Or Associations Of The Philippines; Iii. When The Goods Sought To Be Procured Are Not Available From Local Suppliers; Or Iv. When There Is A Need To Prevent Situations That Defeat Competition Or Restrain Trade. 5.3. Pursuant To Section 23.4.1.3 Of The 2016 Revised Irr Of Ra No.9184, The Bidder Shall Have An Slcc That Is At Least One (1) Contract Similar To The Project The Value Of Which, Adjusted To Current Prices Using The Psa’s Cpi, Must Be At Least Equivalent To: A. For The Procurement Of Non-expendable Supplies And Services: The Bidder Must Have Completed A Single Contract That Is Similar To This Project, Equivalent To At Least Fifty Percent (50%) Of The Abc. B. For The Procurement Of Expendable Supplies: The Bidder Must Have Completed A Single Contract That Is Similar To This Project, Equivalent To At Least Twenty-five Percent (25%) Of The Abc. C. For Procurement Where The Procuring Entity Has Determined, After The Conduct Of Market Research, That Imposition Of Either (a) Or (b) Will Likely Result To Failure Of Bidding Or Monopoly That Will Defeat The Purpose Of Public Bidding: The Bidder Should Comply With The Following Requirements: [select Either Failure Or Monopoly Of Bidding Based On Market Research Conducted] I. Completed At Least Two (2) Similar Contracts, The Aggregate Amount Of Which Should Be Equivalent To At Least Fifty Percent (50%) In The Case Of Non-expendable Supplies And Services Or Twenty-five Percent (25%) In The Case Of Expendable Supplies] Of The Abc For This Project; And Ii. The Largest Of These Similar Contracts Must Be Equivalent To At Least Half Of The Percentage Of The Abc As Required Above. 5.4. The Bidders Shall Comply With The Eligibility Criteria Under Section 23.4.1 Of The 2016 Irr Of Ra No. 9184. 6. Origin Of Goods There Is No Restriction On The Origin Of Goods Other Than Those Prohibited By A Decision Of The Un Security Council Taken Under Chapter Vii Of The Charter Of The Un, Subject To Domestic Preference Requirements Under Itb Clause 18. 7. Subcontracts 7.1. The Bidder May Subcontract Portions Of The Project To The Extent Allowed By The Procuring Entity As Stated Herein, But In No Case More Than Twenty Percent (20%) Of The Project. The Procuring Entity Has Prescribed That: Subcontracting Is Not Allowed. 8. Pre-bid Conference The Procuring Entity Will Hold A Pre-bid Conference For This Project On The Specified Date And Time And Either At Its Physical Address As Indicated In Paragraph 6 Of The Ib. 9. Clarification And Amendment Of Bidding Documents Prospective Bidders May Request For Clarification On And/or Interpretation Of Any Part Of The Bidding Documents. Such Requests Must Be In Writing And Received By The Procuring Entity, Either At Its Given Address Or Through Electronic Mail Indicated In The Ib, At Least Ten (10) Calendar Days Before The Deadline Set For The Submission And Receipt Of Bids. 10. Documents Comprising The Bid: Eligibility And Technical Components 10.1. The First Envelope Shall Contain The Eligibility And Technical Documents Of The Bid As Specified In Section Viii (checklist Of Technical And Financial Documents). 10.2. The Bidder’s Slcc As Indicated In Itb Clause 5.3 Should Have Been Completed Within Three (3) Years Prior To The Deadline For The Submission And Receipt Of Bids. 10.3. If The Eligibility Requirements Or Statements, The Bids, And All Other Documents For Submission To The Bac Are In Foreign Language Other Than English, It Must Be Accompanied By A Translation In English, Which Shall Be Authenticated By The Appropriate Philippine Foreign Service Establishment, Post, Or The Equivalent Office Having Jurisdiction Over The Foreign Bidder’s Affairs In The Philippines. Similar To The Required Authentication Above, For Contracting Parties To The Apostille Convention, Only The Translated Documents Shall Be Authenticated Through An Apostille Pursuant To Gppb Resolution No. 13-2019 Dated 23 May 2019. The English Translation Shall Govern, For Purposes Of Interpretation Of The Bid. 11. Documents Comprising The Bid: Financial Component 11.1. The Second Bid Envelope Shall Contain The Financial Documents For The Bid As Specified In Section Viii (checklist Of Technical And Financial Documents). 11.2. If The Bidder Claims Preference As A Domestic Bidder Or Domestic Entity, A Certification Issued By Dti Shall Be Provided By The Bidder In Accordance With Section 43.1.3 Of The 2016 Revised Irr Of Ra No. 9184. 11.3. Any Bid Exceeding The Abc Indicated In Paragraph 1 Of The Ib Shall Not Be Accepted. 11.4. For Foreign-funded Procurement, A Ceiling May Be Applied To Bid Prices Provided The Conditions Are Met Under Section 31.2 Of The 2016 Revised Irr Of Ra No. 9184. 12. Bid Prices 12.1. Prices Indicated On The Price Schedule Shall Be Entered Separately In The Following Manner: A. For Goods Offered From Within The Procuring Entity’s Country: I. The Price Of The Goods Quoted Exw (ex-works, Ex-factory, Ex-warehouse, Ex-showroom, Or Off-the-shelf, As Applicable); Ii. The Cost Of All Customs Duties And Sales And Other Taxes Already Paid Or Payable; Iii. The Cost Of Transportation, Insurance, And Other Costs Incidental To Delivery Of The Goods To Their Final Destination; And Iv. The Price Of Other (incidental) Services, If Any, Listed In E. B. For Goods Offered From Abroad: I. Unless Otherwise Stated In The Bds, The Price Of The Goods Shall Be Quoted Delivered Duty Paid (ddp) With The Place Of Destination In The Philippines As Specified In The Bds. In Quoting The Price, The Bidder Shall Be Free To Use Transportation Through Carriers Registered In Any Eligible Country. Similarly, The Bidder May Obtain Insurance Services From Any Eligible Source Country. Ii. The Price Of Other (incidental) Services, If Any, As Listed In Section Vii (technical Specifications). 13. Bid And Payment Currencies 13.1. For Goods That The Bidder Will Supply From Outside The Philippines, The Bid Prices May Be Quoted In The Local Currency Or Tradeable Currency Accepted By The Bsp At The Discretion Of The Bidder. However, For Purposes Of Bid Evaluation, Bids Denominated In Foreign Currencies, Shall Be Converted To Philippine Currency Based On The Exchange Rate As Published In The Bsp Reference Rate Bulletin On The Day Of The Bid Opening. 13.2. Payment Of The Contract Price Shall Be Made In: Philippine Pesos. 14. Bid Security 14.1. The Bidder Shall Submit A Bid Securing Declaration Or Any Form Of Bid Security In The Amount Indicated In The Bds, Which Shall Be Not Less Than The Percentage Of The Abc In Accordance With The Schedule In The Bds. 14.2. The Bid And Bid Security Shall Be Valid Until One Hundred Twenty (120) Days. Any Bid Not Accompanied By An Acceptable Bid Security Shall Be Rejected By The Procuring Entity As Non-responsive. 15. Sealing And Marking Of Bids Each Bidder Shall Submit One Copy Of The First And Second Components Of Its Bid. The Procuring Entity May Request Additional Hard Copies And/or Electronic Copies Of The Bid. However, Failure Of The Bidders To Comply With The Said Request Shall Not Be A Ground For Disqualification. 16. Deadline For Submission Of Bids 16.1. The Bidders Shall Submit On The Specified Date And Time At Its Physical Address As Indicated In Paragraph 7 Of The Ib. 17. Opening And Preliminary Examination Of Bids 17.1. The Bac Shall Open The Bids In Public At The Time, On The Date, And At The Place Specified In Paragraph 9 Of The Ib. The Bidders’ Representatives Who Are Present Shall Sign A Register Evidencing Their Attendance. In Case Videoconferencing, Webcasting Or Other Similar Technologies Will Be Used, Attendance Of Participants Shall Likewise Be Recorded By The Bac Secretariat. In Case The Bids Cannot Be Opened As Scheduled Due To Justifiable Reasons, The Rescheduling Requirements Under Section 29 Of The 2016 Revised Irr Of Ra No. 9184 Shall Prevail. 17.2. The Preliminary Examination Of Bids Shall Be Governed By Section 30 Of The 2016 Revised Irr Of Ra No. 9184. 18. Domestic Preference 18.1. The Procuring Entity Will Grant A Margin Of Preference For The Purpose Of Comparison Of Bids In Accordance With Section 43.1.2 Of The 2016 Revised Irr Of Ra No. 9184. 19. Detailed Evaluation And Comparison Of Bids 19.1. The Procuring Bac Shall Immediately Conduct A Detailed Evaluation Of All Bids Rated “passed,” Using Non-discretionary Pass/fail Criteria. The Bac Shall Consider The Conditions In The Evaluation Of Bids Under Section 32.2 Of The 2016 Revised Irr Of Ra No. 9184. 19.2. If The Project Allows Partial Bids, Bidders May Submit A Proposal On Any Of The Lots Or Items, And Evaluation Will Be Undertaken On A Per Lot Or Item Basis, As The Case Maybe. In This Case, The Bid Security As Required By Itb Clause 15 Shall Be Submitted For Each Lot Or Item Separately. 19.3. The Descriptions Of The Lots Or Items Shall Be Indicated In Section Vii (technical Specifications), Although The Abcs Of These Lots Or Items Are Indicated In The Bds For Purposes Of The Nfcc Computation Pursuant To Section 23.4.2.6 Of The 2016 Revised Irr Of Ra No. 9184. The Nfcc Must Be Sufficient For The Total Of The Abcs For All The Lots Or Items Participated In By The Prospective Bidder. 19.4. The Project Shall Be Awarded As Follows: Complete Bid - One Project Having Several Items That Shall Be Awarded As One Contract In Case Of Complete Bid. Line Bidding/partial Bidding - One Project Having Several Items, Which Shall Be Awarded As Separate Contracts Per Item 19.5. Except For Bidders Submitting A Committed Line Of Credit From A Universal Or Commercial Bank In Lieu Of Its Nfcc Computation, All Bids Must Include The Nfcc Computation Pursuant To Section 23.4.1.4 Of The 2016 Revised Irr Of Ra No. 9184, Which Must Be Sufficient For The Total Of The Abcs For All The Lots Or Items Participated In By The Prospective Bidder. For Bidders Submitting The Committed Line Of Credit, It Must Be At Least Equal To Ten Percent (10%) Of The Abcs For All The Lots Or Items Participated In By The Prospective Bidder. 20. Post-qualification Within A Non-extendible Period Of Five (5) Calendar Days From Receipt By The Bidder Of The Notice From The Bac That It Submitted The Lowest Calculated Bid, The Bidder Shall Submit Its Latest Income And Business Tax Returns Filed And Paid Through The Bir Electronic Filing And Payment System (efps) And Other Appropriate Licenses And Permits Required By Law And Stated In The Bds. 21. Signing Of The Contract 21.1. The Documents Required In Section 37.2 Of The 2016 Revised Irr Of Ra No. 9184 Shall Form Part Of The Contract. Additional Contract Documents Are Indicated In The Bds. Section Iii. Bid Data Sheet Itb Clause 5.3 For This Purpose, Contracts Similar To The Project Shall Be: A. Refers To The Contracts To Be Bid Or The Object Of The Contract; B. Completed Within Three (3) Years Prior To The Deadline For The Submission And Receipt Of Bids. 7.1 Subcontracting Is Not Allowed. 12 The Price Of The Goods Shall Be Quoted Ddp [provincial Population Office] Or The Applicable International Commercial Terms (incoterms) For This Project. 14.1 The Bid Security Shall Be In The Form Of A Bid Securing Declaration, Or Any Of The Following Forms And Amounts: A. The Amount Of Not Less Than Two Percent (2%) Of Abc, If Bid Security Is In Cash, Cashier’s/manager’s Check, Bank Draft/guarantee Or Irrevocable Letter Of Credit; Or B. The Amount Of Not Less Than Five Percent (5%) Of Abc, If Bid Security Is In Surety Bond. 15 Bidders Shall Prepare An Original Of The First (eligibility And Technical) And Second (financial) Envelopes. In Addition, Bidders Shall Submit Separate Copies Of The First And Second Envelopes (copy 1, Copy 2) And Each Set Of Documents Must Clearly Indicate Whether The Same Is Original, Copy 1, Or Copy 2. In The Event Of Any Discrepancy Between The Original And The Copies, The Original Shall Prevail. 19.3 No Further Instructions. 20.2 For The Procurement Of Drugs And Medicines And Medical Equipment/supplies, The Bidder Shall Submit The Following: A. Certificate Of Product Registration From Food And Drug Administration (fda) For Easy Validation During The Post-qualification; B. Certificate If Good Manufacturing Practice From Fda, For Easy Validation During The Post-qualification; C. Batch Release Certificate From Fda, For Easy Validation During The Post-qualification; D. If The Supplier Is Not The Manufacturer, Certification From The Manufacturer That The Supplier Is An Authorized Distributor/ Dealer Of The Products / Items For Easy Validation During The Post-qualification; E. For The Procurement Of Regulated Drugs, The Applicable Type Of S-license: S-1, S-3 (retailer) S-4 (wholesaler) S-5c (manufacturer) S-5d (bulk Depot/storage) S-5e S-5i (importer); F. License To Operate (lto) Issued By Fda, If Applicable; G. After-sales Services/parts, If Applicable; H. Manpower Requirements, If Applicable. 21.2 No Further Instructions. Section Iv. General Conditions Of Contract 1. Scope Of Contract This Contract Shall Include All Such Items, Although Not Specifically Mentioned, That Can Be Reasonably Inferred As Being Required For Its Completion As If Such Items Were Expressly Mentioned Herein. All The Provisions Of Ra No. 9184 And Its 2016 Revised Irr, Including The Generic Procurement Manual, And Associated Issuances, Constitute The Primary Source For The Terms And Conditions Of The Contract, And Thus, Applicable In Contract Implementation. Herein Clauses Shall Serve As The Secondary Source For The Terms And Conditions Of The Contract. This Is Without Prejudice To Sections 74.1 And 74.2 Of The 2016 Revised Irr Of Ra No. 9184 Allowing The Gppb To Amend The Irr, Which Shall Be Applied To All Procurement Activities, The Advertisement, Posting, Or Invitation Of Which Were Issued After The Effectivity Of The Said Amendment. Additional Requirements For The Completion Of This Contract Shall Be Provided In The Special Conditions Of Contract (scc). 2. Advance Payment And Terms Of Payment 2.1. Advance Payment Of The Contract Amount Is Provided Under Annex “d” Of The Revised 2016 Irr Of Ra No. 9184. 2.2. The Procuring Entity Is Allowed To Determine The Terms Of Payment On The Partial Or Staggered Delivery Of The Goods Procured, Provided Such Partial Payment Shall Correspond To The Value Of The Goods Delivered And Accepted In Accordance With Prevailing Accounting And Auditing Rules And Regulations. The Terms Of Payment Are Indicated In The Scc. 3. Performance Security Within Ten (10) Calendar Days From Receipt Of The Notice Of Award By The Bidder From The Procuring Entity But In No Case Later Than Prior To The Signing Of The Contract By Both Parties, The Successful Bidder Shall Furnish The Performance Security In Any Of The Forms Prescribed In Section 39 Of The 2016 Revised Irr Of Ra No. 9184. 4. Inspection And Tests The Procuring Entity Or Its Representative Shall Have The Right To Inspect And/or To Test The Goods To Confirm Their Conformity To The Project Specifications At No Extra Cost To The Procuring Entity In Accordance With The Generic Procurement Manual. In Addition To Tests In The Scc, Section Iv (technical Specifications) Shall Specify What Inspections And/or Tests The Procuring Entity Requires, And Where They Are To Be Conducted. The Procuring Entity Shall Notify The Supplier In Writing, In A Timely Manner, Of The Identity Of Any Representatives Retained For These Purposes. All Reasonable Facilities And Assistance For The Inspection And Testing Of Goods, Including Access To Drawings And Production Data, Shall Be Provided By The Supplier To The Authorized Inspectors At No Charge To The Procuring Entity. 5. Warranty 6.1. In Order To Assure That Manufacturing Defects Shall Be Corrected By The Supplier, A Warranty Shall Be Required From The Supplier As Provided Under Section 62.1 Of The 2016 Revised Irr Of Ra No. 9184. 6.2. The Procuring Entity Shall Promptly Notify The Supplier In Writing Of Any Claims Arising Under This Warranty. Upon Receipt Of Such Notice, The Supplier Shall, Repair Or Replace The Defective Goods Or Parts Thereof Without Cost To The Procuring Entity, Pursuant To The Generic Procurement Manual. 6. Liability Of The Supplier The Supplier’s Liability Under This Contract Shall Be As Provided By The Laws Of The Republic Of The Philippines. If The Supplier Is A Joint Venture, All Partners To The Joint Venture Shall Be Jointly And Severally Liable To The Procuring Entity. Section V. Special Conditions Of Contract Gcc Clause 1 Delivery And Documents – For Purposes Of The Contract, “exw,” “fob,” “fca,” “cif,” “cip,” “ddp” And Other Trade Terms Used To Describe The Obligations Of The Parties Shall Have The Meanings Assigned To Them By The Current Edition Of Incoterms Published By The International Chamber Of Commerce, Paris. The Delivery Terms Of This Contract Shall Be As Follows: [for Goods Supplied From Within The Philippines, State:] “the Delivery Terms Applicable To This Contract Are Delivered 2nd Floor, Provincial Population Office, Iloilo Provincial Capitol, Bonifacio Drive, Iloilo City. Risk And Title Will Pass From The Supplier To The Procuring Entity Upon Receipt And Final Acceptance Of The Goods At Their Final Destination.” Delivery Of The Goods Shall Be Made By The Supplier In Accordance With The Terms Specified In Section Vi (schedule Of Requirements). For Purposes Of This Clause The Procuring Entity’s Representative At The Project Site Is The Authorized Employee/official Of The Iloilo Provincial Government. Incidental Services – The Supplier Is Required To Provide All Of The Following Services, Including Additional Services, If Any, Specified In Section Vi. Schedule Of Requirements: A. Performance Or Supervision Of On-site Assembly And/or Start-up Of The Supplied Goods; B. Furnishing Of Tools Required For Assembly And/or Maintenance Of The Supplied Goods; C. Furnishing Of A Detailed Operations And Maintenance Manual For Each Appropriate Unit Of The Supplied Goods; The Contract Price For The Goods Shall Include The Prices Charged By The Supplier For Incidental Services And Shall Not Exceed The Prevailing Rates Charged To Other Parties By The Supplier For Similar Services. Packaging – The Supplier Shall Provide Such Packaging Of The Goods As Is Required To Prevent Their Damage Or Deterioration During Transit To Their Final Destination, As Indicated In This Contract. The Packaging Shall Be Sufficient To Withstand, Without Limitation, Rough Handling During Transit And Exposure To Extreme Temperatures, Salt And Precipitation During Transit, And Open Storage. Packaging Case Size And Weights Shall Take Into Consideration, Where Appropriate, The Remoteness Of The Goods’ Final Destination And The Absence Of Heavy Handling Facilities At All Points In Transit. The Packaging, Marking, And Documentation Within And Outside The Packages Shall Comply Strictly With Such Special Requirements As Shall Be Expressly Provided For In The Contract, Including Additional Requirements, If Any, Specified Below, And In Any Subsequent Instructions Ordered By The Procuring Entity. The Outer Packaging Must Be Clearly Marked On At Least Four (4) Sides As Follows: Name Of The Procuring Entity Name Of The Supplier Contract Description Final Destination Gross Weight Any Special Lifting Instructions Any Special Handling Instructions A Packaging List Identifying The Contents And Quantities Of The Package Is To Be Placed On An Accessible Point Of The Outer Packaging If Practical. If Not Practical The Packaging List Is To Be Placed Inside The Outer Packaging But Outside The Secondary Packaging. Transportation – Where The Supplier Is Required Under Contract To Deliver The Goods Cif, Cip, Or Ddp, Transport Of The Goods To The Port Of Destination Or Such Other Named Place Of Destination In The Philippines, As Shall Be Specified In This Contract, Shall Be Arranged And Paid For By The Supplier, And The Cost Thereof Shall Be Included In The Contract Price. Where The Supplier Is Required Under This Contract To Transport The Goods To A Specified Place Of Destination Within The Philippines, Defined As The Project Site, Transport To Such Place Of Destination In The Philippines, Including Insurance And Storage, As Shall Be Specified In This Contract, Shall Be Arranged By The Supplier, And Related Costs Shall Be Included In The Contract Price. Where The Supplier Is Required Under Contract To Deliver The Goods Cif, Cip Or Ddp, Goods Are To Be Transported On Carriers Of Philippine Registry. In The Event That No Carrier Of Philippine Registry Is Available, Goods May Be Shipped By A Carrier Which Is Not Of Philippine Registry Provided That The Supplier Obtains And Presents To The Procuring Entity Certification To This Effect From The Nearest Philippine Consulate To The Port Of Dispatch. In The Event That Carriers Of Philippine Registry Are Available But Their Schedule Delays The Supplier In Its Performance Of This Contract The Period From When The Goods Were First Ready For Shipment And The Actual Date Of Shipment The Period Of Delay Will Be Considered Force Majeure. The Procuring Entity Accepts No Liability For The Damage Of Goods During Transit Other Than Those Prescribed By Incoterms For Ddp Deliveries. In The Case Of Goods Supplied From Within The Philippines Or Supplied By Domestic Suppliers Risk And Title Will Not Be Deemed To Have Passed To The Procuring Entity Until Their Receipt And Final Acceptance At The Final Destination. 2.2 Partial Payment Is Not Allowed. 4 The Inspections And Tests That Will Be Conducted Are Through Physical Inspection. Section Vi. Schedule Of Requirements The Delivery Schedule Expressed As Weeks/months Stipulates Hereafter A Delivery Date Which Is The Date Of Delivery To The Project Site. Item Number Description Quantity Total Delivered, Weeks/months 1 Guitar (electric) 10 10 2 Drum Set 5 5 3 Keyboard Stand 5 5 4 Acoustic Guitar 15 15 5 Portable Piano/keyboard 5 5 6 Electric Guitar Amplifier 5 5 ___________________________________ Signature Over Printed Name Section Vii. Technical Specifications Bid No.: Ppo-24-1897-b Item Specification Statement Of Compliance [bidders Must State Here Either “comply” Or “not Comply” Against Each Of The Individual Parameters Of Each Specification Stating The Corresponding Performance Parameter Of The Equipment Offered. Statements Of “comply” Or “not Comply” Must Be Supported By Evidence In A Bidders Bid And Cross-referenced To That Evidence. Evidence Shall Be In The Form Of Manufacturer’s Un-amended Sales Literature, Unconditional Statements Of Specification And Compliance Issued By The Manufacturer, Samples, Independent Test Data Etc., As Appropriate. A Statement That Is Not Supported By Evidence Or Is Subsequently Found To Be Contradicted By The Evidence Presented Will Render The Bid Under Evaluation Liable For Rejection. A Statement Either In The Bidder's Statement Of Compliance Or The Supporting Evidence That Is Found To Be False Either During Bid Evaluation, Post-qualification Or The Execution Of The Contract May Be Regarded As Fraudulent And Render The Bidder Or Supplier Liable For Prosecution Subject To The Applicable Laws And Issuances.] 1 Guitar (electric) Body Wood: Sycamore Neck: Maple Fingerboard: Technical Wood Fret: 22 Scale Length: 25.5”, Minimum Construction: Bolt On Control 1v1t, 5 Way Switch Bridge System: Tremolo Hardware: Chrome Finish: High Gloss Accessories: Cable, Strap, Pick, Allen Wrench, Tremolo 2 Drum Set Full Size Complete Drum Hi-hat, Ride & Crash Cymbals High Gloss Natural Finish -chain Driven Pedals Youtube Video Credits And Compliments To The Owner 12" High Tom 13" Low Tom 16” Floor Tom 22" Bass Drum With Pedal 14" Wood Snare 14" Hi-hat Cymbals W/ Stand 16" Crash Cymbal W/ Stand 20" Ride Cymbal W/ Stand Drum Sticks Drum Stool Drum Key 3 Keyboard Stand -patented Quick A-lever Allows For Easy Set Up, Tear Down And Height Adjustments -non-slip Rubber Pads On All Contact Points, Prevents Keyboard And Stand From Sliding 4 Acoustic Guitar Guitar Construction: 40 Inches Pick-ups: Lc-5 W/ 5 Band Eq Neck: Linden Finger Board: Rosewood Frets: 20 Machine Heads: 3 X 3 Individual Diecast Top: Linden Back & Sides. Linden Bridge: Rosewood 5 Portable Pιανο/κευβοard Number Of Keys. 61 Type Of Keys: Organ-style Velocity Sensitive: Soft, Medium, Hard, Fixed Other Controllers: Pitchbend, Momentary Motion Effect Button Polyphony: 64 Notes Presets: 820 Voices, 290 Rhythms Number Of Effects: 71 Effects Types: Reverb, Chorus, Eq, Dsp Memory: 1.72mb Storage: Usb Flash Drive Formats: Wav, Smf Sequencer: 10 Song, 6 Track, 19,000 Notes, Smf 0/1 Audio Recording: Wav, 16-bit/44.1khz, Stereo, 80 Minutes Audio Inputs: 1 X 1/4" (mic), 1 X 1/8" (aux In) Audio Outputs: 2 X 1/4" Usb: 1 X Type A, 1 X Type B Midi I/o: Usb Head Phones: 1 X 1/4" Pedal Inputs: 1 X 1/4" (sustain) Built-in Speakers: 2 X 4.7", 6w Per Side Power Supply: 12v Dc Power Supply (included) / 6 X Aa Batteries Height: 5.37" Width: 39.06" Depth: 15.87" Weight: 15.43 Lbs. 6 Electric Guitar Amplifier 2 Channels (clean/overdrive) With Independent Volume Controls Reverb Speaker: 12" Power: 220 Vac 50hz Related Power: 60 Watts Rms High Impedance Instrument Input Signal/noise Ratio: 70db Frequency Response: 20hz To 15khz Dimension: 495*225*415 (mm) Weight: 12.5kg 3-band Eq (bass/middle/treble) Stereo Jack Input For Cd/mp3 Player Headphone Output Effects Loop (out/in) Terms And Conditions 1. Items Delivered Shall Have Warranty Of One Year Or Longer 2. Delivery Schedule: Within 30 Days Upon Receipt Of Notice To Proceed 3. Service Center Must Be Located In The Province Or City Of Iloilo ___________________________________ Signature Over Printed Name Section Viii. Checklist Of Technical And Financial Documents I. Technical Component Envelope Class “a” Documents Legal Documents ⬜ (a) Valid Philgeps Registration Certificate (platinum Membership) (all Pages);or ⬜ (b) Registration Certificate From Securities And Exchange Commission (sec), Department Of Trade And Industry (dti) For Sole Proprietorship, Or Cooperative Development Authority (cda) For Cooperatives Or Its Equivalent Document, And ⬜ (c) Mayor’s Or Business Permit Issued By The City Or Municipality Where The Principal Place Of Business Of The Prospective Bidder Is Located, Or The Equivalent Document For Exclusive Economic Zones Or Areas; And ⬜ (d) Tax Clearance Per E.o. No. 398, S. 2005, As Finally Reviewed And Approved By The Bureau Of Internal Revenue (bir). Technical Documents ⬜ (e) Statement Of The Prospective Bidder Of All Its Ongoing Government And Private Contracts, Including Contracts Awarded But Not Yet Started, If Any, Whether Similar Or Not Similar In Nature And Complexity To The Contract To Be Bid; And ⬜ (f) Statement Of The Bidder’s Single Largest Completed Contract (slcc) Similar To The Contract To Be Bid, Except Under Conditions Provided For In Sections 23.4.1.3 And 23.4.2.4 Of The 2016 Revised Irr Of Ra No. 9184, Within The Relevant Period As Provided In The Bidding Documents; And ⬜ (g) Original Copy Of Bid Security. If In The Form Of A Surety Bond, Submit Also A Certification Issued By The Insurance Commission; Or Original Copy Of Notarized Bid Securing Declaration; And ⬜ (h) Conformity With The Technical Specifications, Which May Include Production/delivery Schedule, Manpower Requirements, And/or After-sales/parts, If Applicable; And ⬜ (i) Original Duly Signed Omnibus Sworn Statement (oss); And If Applicable, Original Notarized Secretary’s Certificate In Case Of A Corporation, Partnership, Or Cooperative; Or Original Special Power Of Attorney Of All Members Of The Joint Venture Giving Full Power And Authority To Its Officer To Sign The Oss And Do Acts To Represent The Bidder. Financial Documents ⬜ (j) The Supplier’s Audited Financial Statements, Showing, Among Others, The Supplier’s Total And Current Assets And Liabilities, Stamped “received” By The Bir Or Its Duly Accredited And Authorized Institutions, For The Preceding Calendar Year Which Should Not Be Earlier Than Two (2) Years From The Date Of Bid Submission; And ⬜ (k) The Prospective Bidder’s Computation Of Net Financial Contracting Capacity (nfcc); Or A Committed Line Of Credit From A Universal Or Commercial Bank In Lieu Of Its Nfcc Computation. Class “b” Documents ⬜ (l) If Applicable, A Duly Signed Joint Venture Agreement (jva) In Case The Joint Venture Is Already In Existence; Or Duly Notarized Statements From All The Potential Joint Venture Partners Stating That They Will Enter Into And Abide By The Provisions Of The Jva In The Instance That The Bid Is Successful. Ii. Financial Component Envelope ⬜ (m) Original Of Duly Signed And Accomplished Financial Bid Form; And ⬜ (n) Original Of Duly Signed And Accomplished Price Schedule(s). Other Documentary Requirements Under Ra No. 9184 (as Applicable) ⬜ (o) [for Foreign Bidders Claiming By Reason Of Their Country’s Extension Of Reciprocal Rights To Filipinos] Certification From The Relevant Government Office Of Their Country Stating That Filipinos Are Allowed To Participate In Government Procurement Activities For The Same Item Or Product. ⬜ (p) Certification From The Dti If The Bidder Claims Preference As A Domestic Bidder Or Domestic Entity.

Details: The subject of the Public Contract is the conclusion of a contract for the work with one contractor for the execution of construction works on the bridge Ev. C. 4585-7 In the municipality of Zátor, which was damaged as a result of a natural disaster (flood) in the Moravian-Silesian Region in September 2024. Within the framework of the Ev. C. 4585-7 This concerns the implementation of rehabilitation - the creation of a two-sided coastal fortification with a stone level. Next, Adjustment of the Bottom of the Inlet - Leveling and Cleaning of the Existing Concrete, Deepening for the Transverse Threshold and Concreting of the Threshold. It is also necessary to carry out the clearing of vegetation, the repair of the paving of the bottom of the inlet, and also the restoration of the railings and the repair of the sidewalk. The Contractor will ensure the Processing of Transport Engineering Measures – I.e. Workplace Marking, According to Tp 66 For Marking Workplaces On Land Communications. If the Item Amount for Other and Ancillary Costs is not part of the Statement, the Participant will estimate these Costs under Other Items. Estimated Implementation Time Is Set Max. For 14 Calendar Days.

Details: Description Supply And Delivery Of Information And Communication Technology (ict) Equipment – 2 Lots Project Identification No. Pb-011-2024 The Philippine Fiber Industry Development Authority Through The General Appropriations Act Fy 2024 Approved Annual Procurement Plan (pcaarrd Project 4) Intends To Apply The Sum Of Two Million Six Hundred Sixty Thousand Pesos (php2,660,000.00) Being The Abc To Payments Under The Contract For The Supply And Delivery Of Information And Communication Technology (ict Equipment – 2 Lots With Project Identification No. Pb-011-2024. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. The Philippine Fiber Industry Development Authority Through The General Appropriations Act Fy 2024 Approved Annual Procurement Plan (pcaarrd Project 4) Intends To Apply The Sum Of Two Million Six Hundred Sixty Thousand Pesos (php2,660,000.00) Being The Abc To Payments Under The Contract For Each Lot. Bids Received In Excess Of The Abc For Each Lot Shall Be Automatically Rejected At Bid Opening. Lot No. 1 - Supply And Delivery Of Branded And Brand New Laptop Computer - Php160,000.00 Lot No. 2 - Supply, Delivery, Installation And Setup Of High Processing Workstation Set For Generative A.i. Modelling And Bioinformatics Analysis - Php2,500,000.00 Estimated Total Cost: Php2,660,000.00 The Philippine Fiber Industry Development Authority Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required By And Shall Be In Accordance With The Delivery Schedule Under Section Vi. Schedule Of Requirements. Bidders Should Have Completed, Within Five (5) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. Prospective Bidders May Obtain Further Information From Philfida And Inspect The Bidding Documents At The Address Given Below During Office Hours From 8:00 Am To 5:00 Pm. A Complete Set Of Bidding Documents Can Be Accessed Online Starting November 22, 2024 (friday) And The Hard Copy Can Be Purchased By Interested Bidders Starting November 25, 2024 (monday) From The Given Address And Websites Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of: Lot No. 1 - Supply And Delivery Of Branded And Brand New Laptop Computer - Php160.00 Lot No. 2 - Supply, Delivery, Installation And Setup Of High Processing Workstation Set For Generative A.i. Modelling And Bioinformatics Analysis - Php2,500.00 Total Bid Doc Price: Php2,660.00 The Philfida Will Hold A Pre-bid Conference On November 29, 2024 (friday) At 9:30 A.m. Through Video Conferencing Via Microsoft Office 365 Teams Which Shall Be Open To Prospective Bidders. Bidder/s Should Submit A Valid Email Address One (1) Day Before The Pre-bid Conference. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At Philfida’s Fiber Processing And Utilization Laboratory, Bai Compound, Visayas Ave., Diliman, Quezon City On Or Before December 16, 2024 (monday) At 9:00 A.m. Late Bids Shall Not Be Accepted. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. Bid Opening Shall Be On December 16, 2024 (monday) At 9:30 A.m. At Philfida’s Fiber Processing And Utilization Laboratory: Bai Compound, Visayas Avenue, Quezon City To Be Streamed Live Via Ms Office 365 Teams, The Link Of Which Is Available By Request. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. Bidders May Opt To Attend Virtually. The Bidders Shall Drop Three (3) Copies Of Their Duly Accomplished Eligibility Requirement, Technical And Financial Proposals In Two (2) Separate Sealed Envelopes In The Bid Box Located At Philfida’s Fiber Processing And Utilization Laboratory: Bai Compound, Visayas Avenue, Quezon City. Interested Bidders Are Requested To Contact The Bac Secretariat At Cellular Phone Nos.: 09189402419 And 09274003482 Before Submitting The Bidding Documents. Technical Specifications: Supply And Delivery Of Information And Communication And Technology (ict) Equipment - 2 Lots Lot 1 Supply And Delivery Of Branded And Brand New Laptop Computer Technical Specifications: 1. 2 Units 2. 14-inch Fhd+ / Ips-level Display (at Least 1920 X 1200 Resolution) 3. Monitor Panel Refresh Rate Of At Least 144hz With At Least 100% Srgb Color Coverage 4. At Least 14 Total Cores And 18 Total Threads (combination Of Performance And Efficient Cores), With At Least 3.3ghz Performance Clock Base Speed 5. At Least 6gb Of Gddr6 Dedicated Graphical Unit, With Raytracing Capability 6. At Least 16 Gb Ddr5 Ram 7. With At Least 512gb M.2 Ssd 8. With Webcam 9. With Backlit Keyboard 10. With At Least Wifi7 Technology 11. With At Least 1x Thunderbolt™ 4 (displayport™/ Power Delivery 3.1); 1x Type-c (usb3.2 Gen2 / Displayport™/ Power Delivery 3.0); 1x Type-a Usb3.2 Gen2; 1x Hdmi™ 2.1 (8k @ 60hz / 4k @ 120hz); 1x Rj45 12. With At Least Windows 11 Pro/home Os Delivery Period: Forty-five (45) Calendar Days Upon Receipt Of Ntp Delivery Site: Immunology And Molecular Biology Laboratory, Visayas Ave., Quezon City Lot 2 Supply, Delivery, Installation And Orientation Of High Processing Workstation Set For Generative A.i. Modelling And Bioinformatics Analysis Technical Specifications: Workstation I: 1. Central Processing Unit: A. At Least 350w Thermal Design Power (tdp) With At Least 64 Core, 128 Threads, And 256mb Cache B. With A Base Clock Speed Of At Least 3.20ghz And A Turbo Speed Of At Least 5.10 Ghz C. Compatible With Wrx90 Socket D. With Compatible Heatsinks And Air Cooling Peripheral For Thermal Management 2. Graphical Processing Unit: A. Dual (2) Gpu Setup Connected Through 2-way Low Profile Bridges B. Each Gpu Should Have At Least 300w Max Power Consumption C. Each Gpu Should Have At Least 48 Gb Gddr6 D. With And Compatible With Pci Express Generation 4 X 16 Graphics Bus E. Vr/raytracing Compatible F. With At Least 4 Display Ports G. Ampere Architecture-based Gpu H. With At Least 10,700 Cuda Cores, And At Least 300 Tensor Cores For A.i Generation And Modelling 3. Memory: A. With A Total Memory Of At Least 256 Gb - Ddr5, Partitioned To 4 Channels B. Memory Should Have At Least 4,800 Mhz Speed 4. Storage: A. With At Least 2 Tb M.2 Nvme Ssd Boot Drive B. With At Least 24 Tb Total Hard-drive Storage, With A Speed Of At Least 7,200 Rpm 5. Chassis And Power Supply: A. Compatible Chassis To Contain Parts B. With At Least 1350w Power Supply 6. Operating System: A. With Windows 11 Pro (english) Operating System Workstation Ii: 1. Central Processing Unit: A. At Least 350w Thermal Design Power (tdp) With At Least 64 Core, 128 Threads, And 256mb Cache B. With A Base Clock Speed Of At Least 3.20ghz And A Turbo Speed Of At Least 5.10 Ghz C. Compatible With Wrx90 Socket D. With Compatible Heatsinks And Air Cooling Peripheral For Thermal Management 2. Graphical Processing Unit: A. With At Least 4 Gb Gddr6 Memory B. At Least 350 Cuda Cores C. With At Least Pci Express Gen 3 Bus D. Turing Gpu Architecture 3. Memory: A. With A Total Memory Of At Least 256 Gb - Ddr5, Partitioned To 4 Channels B. Memory Should Have At Least 4,800 Mhz Speed 4. Storage: A. With At Least 2 Tb M.2 Nvme Ssd Boot Drive B. With At Least 24 Tb Total Hard-drive Storage, With A Speed Of At Least 7,200 Rpm 5. Chassis And Power Supply: A. Compatible Chassis To Contain Parts B. With At Least 1350w Power Supply 6. Operating System: A. With Windows 11 Pro (english) Operating System Peripherals, Software And Warranty: 1. Monitors: A. Two (2) Ips Panel Monitors With At Least 27 Inch Diagonal Size B. Full Hd (1920x1080) Resolution C. Height, Tilt, Swivel And Pivot Adjustable D. Supports Hdmi, Usb 3.2, Rj45 Connection 2. Keyboard And Mouse: A. 2 Pairs Of Qwerty Full Keyboard, And 2 Optical Mouse For The Workstations 3. Four (4) Support Laptops: A. With At Least 16 Cores, 22 Threads And 24 Mb Cache B. With A Turbo Clockspeed Of At Least 4.8 Ghz C. With A Dedicated Graphical Processing Unit With At Least 4gb Gddr6 Memory, Ray-tracing Compatible D. With At Least 32 Gb Ddr5 Memory, With Speed Of At Least 5600 Mt/s E. With At Least 2 Tb M.2 Nvme Ssd Storage F. At Least 15.6" Display Screen With Resolution Of At Least 1920x1080 Fhd G. With Built-in Microphone, Camera, Backlit Keyboard, Wifi 6/6e H. Inclusion Of Wireless Optical Mouse And Backpack I. With Windows 11 Pro (english) Operating System 4. Services And Warranty: A. At Least 3 Years Warranty Support For All Equipment B. At Least 3 Years On-site Services For Workstations C. At Least 1 Year On-site Services For Laptops D. At Least 1 Year Warranty On Laptop Batteries Delivery Period: Forty-five (45) Calendar Days Upon Receipt Of Ntp Delivery Site: Immunology And Molecular Biology Laboratory, Visayas Ave., Quezon City

Details: The National Institute Of Diabetes And Digestive And Kidney Diseases (niddk) Seeks Industry Partners For Clinical Research Collaborations On Therapeutics, Diagnostics Or Devices For The Liver Cirrhosis Network the National Institute Of Diabetes And Digestive And Kidney Diseases (niddk) Of The National Institutes Of Health (nih) Of The Department Of Health And Human Services (dhhs) Has Released Requests For Applications Rfa-dk-20-003 And Rfa-dk-20-004 For The Establishment Of The Liver Cirrhosis Network; And Seeks Industry Collaborators To Provide Novel Or Repurposed Therapeutic Agents, Diagnostic Markers, Biomarkers, Devices, Or Services For Use In Nih-sponsored Multi-center Clinical Trials And Ancillary Studies In Adult Patients With Advanced Liver Disease And Cirrhosis; And The Hepatic And Extrahepatic Related Complications Emanating From Cirrhosis. background: The Niddk Is Proposing The Establishment Of The Liver Cirrhosis Network Through Funding Opportunity Announcements Rfa-dk-20-003 Seeking Clinical Centers; And In Conjunction With Rfa-dk-20-004 Seeking A Single Scientific Data Coordination Center, In Order To Promote Clinical And Translational Research On Cirrhosis Of The Liver And Related Complications In Adults. cirrhosis Represents Not A Single Disease But Is Rather The Consequence And Major Serious Outcome Of Many Chronic Liver Diseases, Caused By A Wide Range Of Conditions. The Etiologies Of Cirrhosis In The United States Include Infectious Causes Such As Chronic Hepatitis B, C And D; Genetic Causes Such As Wilson Disease, Hemochromatosis And Alpha-1-antitrypsin Deficiency; Metabolic Causes Such As Nonalcoholic Steatohepatitis; Autoimmunity Such As Autoimmune Hepatitis, Primary Biliary Cholangitis And Sclerosing Cholangitis; And Toxic Causes Such As Alcohol-associated Liver Disease And Chronic Liver Injury From Medications Such As Methotrexate And Amiodarone. Cirrhosis From These Diseases Is Almost Always The Result Of Chronic Injury With Persistent Inflammation And Cell Damage That Results In Faulty Healing And Fibrosis. As Fibrosis Accumulates It Causes Distortion Of The Architecture Of Liver, Portal Hypertension And Compromise Of Liver Function. Clinical Complications Of Cirrhosis Include Symptoms Of Fatigue, Weakness, Weight Loss, Itching And Jaundice; Gastrointestinal Bleeding From Varices Or Portal Hypertensive Gastropathy, Coagulopathy, Ascites And Disturbance Of Fluid And Electrolyte Balance, Renal Dysfunction And Hepatic Encephalopathy. The Most Dreaded Complication Of Cirrhosis Is Hepatocellular Carcinoma, A Highly Fatal Cancer That Arises In 1 To 3% Of Persons With Cirrhosis Yearly. Once Cirrhosis Is Present, Treatment Of The Underlying Liver Disease Can Lessen Further Progression And Deterioration, But Does Not Eliminate All Risk Of Complications, Particularly Hepatocellular Carcinoma. mortality Due To Liver Disease Remains A Significant Public Health Burden In The United States, Currently Ranked 11th Overall And Ranking 6th In Persons Below The Age Of 65 Years. Cirrhosis Appears To Be Rising In Some Populations Such As Persons Living With Hiv Infection, Nonalcoholic Fatty Liver Disease And Cystic Fibrosis. Hepatocellular Carcinoma Incidence Is Also Rising In The United States And Is A Surrogate For The Prevalence Of Cirrhosis. treatment Of Underlying Causes Of Chronic Liver Disease Such As Antivirals For Chronic Hepatitis B And C; Therapeutic Phlebotomy For Genetic Hemochromatosis; Ursodiol For Primary Biliary Cirrhosis; Weight Loss For Nonalcoholic Steatohepatitis (nash), And Cessation Of Alcohol Consumption For Alcohol-associated Liver Disease, All Underpin The Overarching Clinical Approach To Prevent The Development Of Cirrhosis By Early Abrogation Of Ongoing Injury To The Still Noncirrhotic Liver. Neutralization Of The Liver Disease Etiology May Allow The Injured Liver To Invoke Endogenous Mechanisms To Reverse The Consequences Of Chronic Inflammation And The Accumulation Of Mild Or Even Modest Amounts Of Liver Fibrosis. However, Once Advanced Fibrosis Or Cirrhosis Has Been Established, Neutralization Of The Causes Of Liver Disease Generally Will Not Reverse Fibrosis Or Cirrhosis Completely. While The Residual Risk Of Complications May Be Decrease, This May Be Off-set By The Improvement In Survival, So That Patients With Cirrhosis And Advanced Fibrosis Will Live And Be At Risk For The Complications Longer. liver Transplantation Is Currently The Only Medically Viable Avenue For Patients With End-stage Liver Disease That Will Extend Their Longevity. On An Annual Basis, Despite Treatment Success Rates For Chronic Hepatitis C And Other Liver Diseases, The National Wait List For Liver Transplantation In The United States Remains Essentially Unchanged At Approximately 13,000 Patients. Only 8000 Liver Transplantations Are Performed Annually. However, Far, Far More Patients With End-stage Liver Disease Are Not Even Placed On Liver Transplantation Lists For A Variety Of Co-morbid Or Psychosocial Issues. given The Discrepancy Between The Need And The Availability Of Liver Organs For Patients On Liver Transplant Waiting Lists And The Even More Numerous Patients Who Are Unable To Be Considered For Listing For Liver Transplantation, There Is A Significant Need To Improve Our Understanding Of Clinical And Translational Scientific Aspects Of Liver Fibrosis And Cirrhosis. In Addition, There Is A Need For Furthering Fundamental Understanding Of Both The Underlying Pro- And Anti-fibrotic Mechanisms As Well As Risk Factors And Mechanisms That Accentuate Pro- And Anti-fibrotic Processes. study Goals: The Overall Goal Of The Liver Cirrhosis Network Is To Promote Clinical And Translational Research That Will Advance The Understanding Of Liver Fibrosis And Cirrhosis Pathophysiology; Improve Clinical Management Of Liver Cirrhosis And Complications Of Advanced Fibrosis; And To Conduct Clinical Trials To Alter Cirrhosis Liver Disease Trajectory And The Related Complications. While Specific Details Of The Protocols For The Liver Cirrhosis Network Are Yet To Be Defined And Will Be Made By Consensus By The Future Steering Committee Of The Network, It Is Expected That Sufficient Numbers Of Subjects Will Be Enrolled With Either Stable, Child Class A, Cirrhosis Or Evidence Of Advanced Fibrosis (such As Bridging Fibrosis On Liver Biopsy Or Evidence Of Advanced Disease As Assessed By Validated Non-invasive Markers) To Operationalize The Eventual Network Studies. An Attempt Will Be Considered To Enroll Subjects With All Forms Of Cirrhosis (viral, Autoimmune, Genetic, Toxic, Alcohol-associated And “cryptogenic”) And With A Diverse Range Of Demographics As Typifies Chronic Liver Disease In The United States. the Liver Cirrhosis Network Is Interested In Conducting Research That Will Lead To Improved Clinical Outcomes In Adults With Cirrhosis And Advanced Liver Disease With Industry Collaborators To: • Evaluate The Natural History, Pathogenesis, Diagnosis, Genetic Factors, Genomics, Proteomics, Metabolomics, Lipidomics, Epigenomics, Imaging Studies, And Determinants Of Progression And Severity Of Advanced Liver Disease And Cirrhosis-related Complications • Explore Use Of Serum Markers For Fibrosis And Serum Markers For Disease Activity To Predict Hepatic Histology Or Function Either By Themselves Or In Combination With Other Clinical, Laboratory, Genomic, Proteomic, Metabolomic, And Lipidomic Variables • Explore The Utility Of These Serum Markers As Surrogate Markers Of Therapeutic Response In Study Subjects Participating In Treatment Trials • Investigate Proprietary Or Repurposed Drugs (such As Statins, Anti-fibrogenic Agents, Autophagy Inducers, Chemo-preventive Agents, Nonsteroidal Anti-inflammatory Agents, Etc.), Reagents, Or Devices In Controlled Randomized Clinical Trials As Potential Diagnostics Or Therapies For Advanced Liver Disease, Cirrhosis And Cirrhosis Related Complications • Evaluate Noninvasive Imaging Methods For Assessing Fibrosis, Portal Vein Hypertension, Hepatic Function, Screening For Or Diagnosis Of Liver Cancer, And Parenchymal Pathology In Cirrhosis Liver Disease Including But Not Limited To The Use Of Elastography, Nuclear Magnetic Resonance Imaging, And Molecular Imaging. • Evaluate The Use Of Cytokine Assays For Analyses Of Serum/plasma Cytokine Levels As Markers Of Disease Activity And As Surrogate Markers Of Histologic Or Clinical Improvement In Therapeutic Trials capability Statement: Commercial Organizations Interested In Pursuing Clinical Collaborations With Niddk For Cirrhosis Liver Disease Are Required To Submit A Capability Statement To The Niddk. The Capability Statements Submitted In Response To This Announcement Will Be Used To Evaluate And Select Industry Collaborators. The Capability Statement Should Not Exceed 10 (ten) Pages Of Narrative (not Including Appendices) And Should Include The Following Information: 1. A Description Of The Therapeutic, Diagnostic Or Device Proposed To Be Used In The Clinical Research Study. (note: The Proposed Therapeutic Or Device Must Have Been Tested Already In A Phase I Trial In Humans.) 2. The Specific Details Of The Methods To Be Utilized In The Investigation Of The Pharmacologic, Surgical Or Device Intervention In Patients With Cirrhosis Liver Disease, And A Clear Description Of The Important Issues Surrounding The Evaluation Of Disease Progression In These Patients. 3. A Detailed Plan Demonstrating The Ability To Provide Sufficient Quantities Of The Therapeutic, Diagnostic Or Device Either In Total Prior To Study Initiation (preferred If Possible) Or In A Timely Manner For The Duration Of The Study. 4. A Description Of All Laboratory Tests That Are Needed And Proficiency In Conducting These Laboratory Tests, Including Assays And Required Amount Of Specimens, To Determine Specific Biomarker(s) Levels And List Potential Biomarkers, Along With Appropriate Methods For Performing Such Tests. 5. A Description Of Other Core Facilities And Interactions With Core Facilities That Are Needed For The Study. 6. Dosing, Pharmacodynamic, And Pharmacokinetic Data From Human Studies For Any Novel Therapeutics. 7. Adverse Event Profile For The Proposed Therapeutic Or Device. 8. A Description Of The Practices And Procedures That Would Be Used To Assure Patient Privacy And Maintain Confidentiality Of Data Obtained From The Study. 9. (optional) Outcome Measures Of Interest To The Organization. The Specifics Of The Proposed Outcome Measures Should Include But Not Be Limited To Treatment And Evaluation Of Cirrhosis Liver Disease Or Cirrhosis Related Complications. 10. Any Other Resources The Organization Proposes To Commit To The Collaboration (in Addition To The Proposed Therapeutic, Diagnostic Or Device), Which May Include Any Of The Following: Equipment, Reagents, Supplies, Access To Facilities, Personnel Or Services, And, If Appropriate, Funding (pursuant To A Cooperative Research And Development Agreement (crada) Authorized Under 15 U.s.c. § 3710a), To Help Support The Conduct Of The Clinical Study. 11. Affirmative Statements That The Organization: a. Agrees To Provide A Letter Of Cross Reference To The Drug, Biologic Or Device Master File For The Proposed Therapeutic Or Device, Which Will Be Included With Any Us Fda Filing By The Ind Or Ide Sponsor Of The Liver Cirrhosis Network Study; b. Agrees To Have The Proposed Therapeutic, Diagnostic Or Device Used In The Liver Cirrhosis Network-developed Protocols Which Will Be Conducted By The Liver Cirrhosis Network Research Network For Which The Study Data Collection And Analysis Will Be Performed By The Liver Cirrhosis Network Scientific And Data Coordinating Center; c. Agrees To Assure Patient Privacy And Will Maintain Confidentiality Of Data Obtained From The Study; d. Agrees To Share All Safety Data From Other Studies Involving The Proposed Therapeutic Or Device As Well As Relevant Efficacy Data From Other Studies (updated Investigator Brochure, Etc) With The Liver Cirrhosis Network; e. Understands That Because The Liver Cirrhosis Network Is Supported By Niddk Funding, The Study Results Will Be Published And Therefore Agrees To The Prompt Publication Of Research Results From The Clinical Study Using The Organization's Proposed Therapeutic, Diagnostic Or Device; f. Has Intellectual Property Rights To Provide Laboratory Test/biomarker(s), Therapeutic Or Device To Niddk For Testing And Has No Current Agreements Or Arrangements That Could Impede This Right; And f. Understands That The Clinical Study Will Be Conducted Under An Agreement With Niddk Which Must Adhere To Phs Intellectual Property Policies (see: Http://www.ott.nih.gov/policy/phspat_policy.aspx). submission: Capability Statements Received By Niddk Will Be Considered. Prospective Collaborators May Be Invited To Attend, At Their Own Expense, A Liver Cirrhosis Network Steering Committee Meeting To Be Held In The Baltimore-washington, Dc Area To Discuss The Information In Their Capability Statement With The Steering Committee Members. Note:no Funds Will Be Provided By Niddk To Any Organization Selected For This Clinical Research Collaboration Opportunity. submision And Inquiries: Submit Capability Statements To: noo Coordinator, National Institute Of Diabetes And Digestive And Kidney Diseases e-mail: Niddkottdip@niddk.nih.gov for Scientific Inquiries Contact: edward Doo, Md, director, Liver Diseases Research Program division Of Digestive Diseases And Nutrition, Niddk 6707 Democracy Blvd., Room 6149 bethesda, Md 20892-5450 telephone: (301) 451-4524 fax: (301) 480-8300 e-mail: Dooe@niddk.nih.gov for Inquiries Regarding Partnering With Niddk (intellectual Property Matters And Collaboration Agreements) Contact: agnes Rooke, Jd technology Advancement Office niddk, Nih, Hhs telephone: 301-451-6072 e-mail: Agnes.rooke@nih.gov this Notice Of Opportunity Is Also Posted At: Http://techdev.niddk.nih.gov/collabs.shtml.

Details: Description Invitation To Bid For Asset Preservation – Rehabilitation/ Reconstruction/ Upgrading Of Damaged Paved Roads – Primary Roads – Zamboanga City Bypass Road (s01311mn) – Chainage 4920 – Chainage 4933, Chainage 4971 – Chainage 5053, Chainage 5114 – Chainage 5132, Chainage 5132 – Chainage 5159, Chainage 5182 – Chainage 5200, Chainage 5282 – Chainage 5305, Chainage 5305 – Chainage 5373, Chainage 5548 - Chainage 5575, Chainage 5621 – Chainage 5635, Chainage 5635 – Chainage 5671, Chainage 5725 – Chainage 5936, Chainage 5981 – Chainage 5991, Chainage 5999 – Chainage 6007, Chainage 6187 – Chainage 6255, Chainage 6633 – Chainage 6757, Chainage 6826 – Chainage 6860, Chainage 6880 – Chainage 6903, Chainage 6964 – Chainage 7074, Chainage 7895 – Chainage 7922, Chainage 8123 – Chainage 8128, Chainage 8132 – Chainage 8137, Chainage 8137 – Chainage 8142, Chainage 8146 – Chainage 8155, Chainage 8160 – Chainage 8169, Chainage 8169 – Chainage 8223, Chainage 8228 - Chainage 8232, Chainage 8232 – Chainage 8250, Chainage 8250 – Chainage 8322, Chainage 8327 – Chainage 8359, Chainage 8359 – Chainage 8377, Chainage 8381 – Chainage 8390, Chainage 8390 - Chainage 8326, Chainage 8502 - Chainage 8600, Chainage 8681 – Chainage 8711, Chainage 9045 – Chainage 9054, Chainage 9068 – Chainage 9073, Chainage 9095 – Chainage 9109, Chainage 9109 - Chainage 9114, Chainage 9123 – Chainage 9128, Chainage 9132 – Chainage 9150, Chainage 9154 – Chainage 9159, Chainage 9159 – Chainage 9172, Chainage 9177 – Chainage 9190, Chainage 9190 – Chainage 9213, Chainage 9236 – Chainage 9250, Chainage 9250 – Chainage 9259, Chainage 9263 – Chainage 9321, Chainage 9424 – Chainage 9500, Chainage 9607 – Chainage 9621, Chainage 9621 – Chainage 9658, Chainage 9701 – Chainage 9717, Chainage 9765 – Chainage 9794, Chainage 9995 – Chainage 10027, Chainage 10192 – Chainage 10255, Chainage 10310 – Chainage 10333, Chainage 10800 – Chainage 10817 1. The Department Of Public Works And Highways - Zamboanga City 2nd District Engineering Office, Through The Gop Cy 2025 Intends To Apply The Sum Of Php26,496,975.05 Being The Approved Budget For The Contract (abc) To Payments Under The Contract For 25ja0002 – Asset Preservation – Rehabilitation/ Reconstruction/ Upgrading Of Damaged Paved Roads – Primary Roads – Zamboanga City Bypass Road (s01311mn) – Chainage 4920 – Chainage 4933, Chainage 4971 – Chainage 5053, Chainage 5114 – Chainage 5132, Chainage 5132 – Chainage 5159, Chainage 5182 – Chainage 5200, Chainage 5282 – Chainage 5305, Chainage 5305 – Chainage 5373, Chainage 5548 - Chainage 5575, Chainage 5621 – Chainage 5635, Chainage 5635 – Chainage 5671, Chainage 5725 – Chainage 5936, Chainage 5981 – Chainage 5991, Chainage 5999 – Chainage 6007, Chainage 6187 – Chainage 6255, Chainage 6633 – Chainage 6757, Chainage 6826 – Chainage 6860, Chainage 6880 – Chainage 6903, Chainage 6964 – Chainage 7074, Chainage 7895 – Chainage 7922, Chainage 8123 – Chainage 8128, Chainage 8132 – Chainage 8137, Chainage 8137 – Chainage 8142, Chainage 8146 – Chainage 8155, Chainage 8160 – Chainage 8169, Chainage 8169 – Chainage 8223, Chainage 8228 - Chainage 8232, Chainage 8232 – Chainage 8250, Chainage 8250 – Chainage 8322, Chainage 8327 – Chainage 8359, Chainage 8359 – Chainage 8377, Chainage 8381 – Chainage 8390, Chainage 8390 - Chainage 8326, Chainage 8502 - Chainage 8600, Chainage 8681 – Chainage 8711, Chainage 9045 – Chainage 9054, Chainage 9068 – Chainage 9073, Chainage 9095 – Chainage 9109, Chainage 9109 - Chainage 9114, Chainage 9123 – Chainage 9128, Chainage 9132 – Chainage 9150, Chainage 9154 – Chainage 9159, Chainage 9159 – Chainage 9172, Chainage 9177 – Chainage 9190, Chainage 9190 – Chainage 9213, Chainage 9236 – Chainage 9250, Chainage 9250 – Chainage 9259, Chainage 9263 – Chainage 9321, Chainage 9424 – Chainage 9500, Chainage 9607 – Chainage 9621, Chainage 9621 – Chainage 9658, Chainage 9701 – Chainage 9717, Chainage 9765 – Chainage 9794, Chainage 9995 – Chainage 10027, Chainage 10192 – Chainage 10255, Chainage 10310 – Chainage 10333, Chainage 10800 – Chainage 10817. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Department Of Public Works And Highways - Zamboanga City 2nd District Engineering Office Through Its Bids And Awards Committee Now Invites Bids For The Hereunder Works: Name Of Contract : Asset Preservation – Rehabilitation/ Reconstruction/ Upgrading Of Damaged Paved Roads – Primary Roads – Zamboanga City Bypass Road (s01311mn) – Chainage 4920 – Chainage 4933, Chainage 4971 – Chainage 5053, Chainage 5114 – Chainage 5132, Chainage 5132 – Chainage 5159, Chainage 5182 – Chainage 5200, Chainage 5282 – Chainage 5305, Chainage 5305 – Chainage 5373, Chainage 5548 - Chainage 5575, Chainage 5621 – Chainage 5635, Chainage 5635 – Chainage 5671, Chainage 5725 – Chainage 5936, Chainage 5981 – Chainage 5991, Chainage 5999 – Chainage 6007, Chainage 6187 – Chainage 6255, Chainage 6633 – Chainage 6757, Chainage 6826 – Chainage 6860, Chainage 6880 – Chainage 6903, Chainage 6964 – Chainage 7074, Chainage 7895 – Chainage 7922, Chainage 8123 – Chainage 8128, Chainage 8132 – Chainage 8137, Chainage 8137 – Chainage 8142, Chainage 8146 – Chainage 8155, Chainage 8160 – Chainage 8169, Chainage 8169 – Chainage 8223, Chainage 8228 - Chainage 8232, Chainage 8232 – Chainage 8250, Chainage 8250 – Chainage 8322, Chainage 8327 – Chainage 8359, Chainage 8359 – Chainage 8377, Chainage 8381 – Chainage 8390, Chainage 8390 - Chainage 8326, Chainage 8502 - Chainage 8600, Chainage 8681 – Chainage 8711, Chainage 9045 – Chainage 9054, Chainage 9068 – Chainage 9073, Chainage 9095 – Chainage 9109, Chainage 9109 - Chainage 9114, Chainage 9123 – Chainage 9128, Chainage 9132 – Chainage 9150, Chainage 9154 – Chainage 9159, Chainage 9159 – Chainage 9172, Chainage 9177 – Chainage 9190, Chainage 9190 – Chainage 9213, Chainage 9236 – Chainage 9250, Chainage 9250 – Chainage 9259, Chainage 9263 – Chainage 9321, Chainage 9424 – Chainage 9500, Chainage 9607 – Chainage 9621, Chainage 9621 – Chainage 9658, Chainage 9701 – Chainage 9717, Chainage 9765 – Chainage 9794, Chainage 9995 – Chainage 10027, Chainage 10192 – Chainage 10255, Chainage 10310 – Chainage 10333, Chainage 10800 – Chainage 10817 Contract Id No. : 25ja0002 Locations : Zamboanga City Scope Of Works : Rehabilitation/ Reconstruction/ Upgrading Of Damaged Paved Approved Budget For The Contract : 26,496,975.05 Contract Duration : 206 Calendar Days 3. Prospective Bidders Should Be Registered With And Classified By The Philippine Contractors Accreditation Board (pcab) With Pcab License Category Of C & D (size Range – Small B) For General Engineering -1 (roads, Haighways, Pavements, Railways, Airport Horizontal Structure, And Bridges). The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Annex Ii-1.1 B Section Ii And Iii Of Bidding Documents. Contractors/applicants Who Wish To Participate In This Bidding Are Encouraged To Enroll In The Dpwh Civil Works Application (cwa) At The Dpwh Procurement Service (prs), 5th Floor, Dpwh Bldg., Bonifacio Drive, Port Area, Manila, While Those Already Enrolled Shall Keep Their Records Current And Updated. The Contractor’s Eligibility To Bid On The Project Will Be Determined Using The Dpwh Contractor Profile Eligibility Process (cpep) And Subject To Further Post-qualification. Information On Registration Can Be Obtained From The Prs During Working Weekdays From 7:00 Am To 4:00 Pm Or At The Dpwh Website Www.dpwh.gov.ph. 4. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary Pass/fail Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184), Otherwise Known As The “government Procurement Reform Act”. The Contract Shall Be Awarded To The Lowest Calculated Responsive Bidder (lcrb) Who Was Determined As Such During Post-qualification. 5. Interested Bidders May Obtain Further Information From The Department Of Public Works And Highways - Zamboanga City 2nd District Engineering Office And Inspect The Bidding Documents At Mcll Highway, Divisoria, Zamboanga City During Weekdays From 8:00am To 5:00pm. 6. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 18, 2024 Up To The Date Of Opening Of Bids From The Address Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Php 25,000.00. 7. It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps), And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 8. The Department Of Public Works And Highways - Zamboanga City 2nd District Engineering Office Will Hold A Pre-bid Conference On November 25, 2024 @ 2:00pm At Bac, Dpwh-zcdeo Mcll Highway, Divisoria, Zc, Which Shall Be Open To Prospective Bidders. 9. Bid Submission Maybe Done Manually Or Electronically/online. However, Bidders Should Only Select One Mode Of Submission, Either Manual Or Electronic. Similar To Manual Submission, The Guidelines For The Preparation And Submission Of An Electronic Bid Are Contained In The Bds. 10. Bids Must Be Duly Received By The Bac Secretariat At The Address Below For Manual Submission Or At Electronicbids_zamboangacity@dpwh.gov.ph For Electronic Submission On Or Before December 09, 2024 @ 10:00am. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 18. 11. Bid Opening Shall Be On December 09, 2024 @ 10:00am At Bac, Dpwh-zc 2nd Deo Mcll Highway, Divisoria, Zc. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below Or Bidders May Visit @www.youtube.com/@zamboanga_city_deo For The Livestreaming During Opening Of Bids. Late Bids Shall Not Be Accepted. 12. The Department Of Public Works And Highways - Zamboanga City 2nd District Engineering Office Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 13. For Further Information, Please Refer To: Teresita F. Marquez Head, Bac Secretariat Tel: 984-245 Carolyn M. Orbecido Bac - Chairperson 984-245