Bridge Tenders

Details: Description 1. The Davao Oriental 2nd District Engineering Office, Through The Gaa Fy-2025 Intends To Apply The Sum Of Approved Budget For The Contract (abc) Stated Below Being The Abc To Payments Under The Contracts Below. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening And Declared Non-complying/failed. 2. The Dpwh Davao Oriental 2nd District Engineering Office Through Its Bids And Awards Committee Now Invites Bid For The Hereunder Works Of The Contract: 2.3 Contract Id No. : 25lg0024 Contract Name : Rehabilitation/ Major Repair Of Magdug Br. (b01132mn) Along Tibanban-lavigan Rd Contract Location : Governor Generoso, Davao Oriental Project Description/scope Of Work : - Lengthening Of Bridge (17 Meters) On Bored Pile Foundation - Detour Steel - Abutment Protection On Sheet Pile Foundation Approved Budget For The Contract : Php 39,200,000.00 Contract Duration : 243 Calendar Days Cost Of Bidding Documents : Php 25,000.00 Pcab License(size Range) : Medium A 3. Prospective Bidders Should Be Registered With And Classified By The Philippine Contractors Accreditation Board (pcab) With Pcab License Category For License Classification As Stated Above. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Annex Ii-1.1 B Section Ii And Iii Of Bidding Documents Contractors/applicants Who Wish To Participate In This Bidding Are Encouraged To Enroll In The Dpwh Civil Works Application (cwa) At The Dpwh Procurement Service (prs), 5th Floor, Dpwh Bldg., Bonifacio Drive, Port Area, Manila, While Those Already Enrolled Shall Keep Their Records Current And Updated. The Contractor’s Eligibility To Bid On The Project Will Be Determined Using The Dpwh Contractor Profile Eligibility Process (cpep) And Subject To Further Post-qualification. Information On Registration Can Be Obtained From The Prs During Working Weekdays From 7:00 Am To 4:00 Pm Or At The Dpwh Website Www.dpwh.gov.ph. 4. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary Pass/fail Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184), Otherwise Known As The "“government Procurement Reform Act”. The Contract Shall Be Awarded To The Lowest Calculated Responsive Bidder (lcrb) Who Was Determined As Such During Post-qualification. 5. Interested Bidders May Obtain Further Information From The Dpwh Davao Oriental 2nd District Engineering Office And Inspect The Bidding Documents At Brgy. Matiao, Mati, Davao Oriental During Weekdays From 8:00 A.m. To 5:00 P.m. 6. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders From The Address Below And Upon Payment Of A Non-refundable Fee For The Bidding Documents In The Amount Stated Above. Bidders Can Make Payments For The Purchase Of The Bidding Documents At Any Dpwh Field Offices. The Schedule Of Key Procurement Activities For This Contract Is Shown Below: Procurement Activity Date/time 1. Publication/issuance And Downloading Of Bidding Documents: November 21, 2024 To December 12, 2024 2. Pre-bid Conference :november 29, 2024 @ 10:00 A.m. 3. Deadline Of Receipt/submission Of Bids: December 12, 2024 @ 10:00 A.m. 4. Opening Of Bids: December 12, 2024 @ 10:00 A.m. 7. It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps), And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 8. Pre-bid Conference And Opening Of Bids Will Be Held At The 3rd Floor Conference Room, Dpwh Compound, Brgy. Matiao, City Of Mati, Davao Oriental Which Is Also Accessible Through Youtube Live Streaming Through This Page Https://www.youtube.com/@dpwh_davor2_deo , Which Shall Be Open To Prospective Bidders. 9. Bid Submission Maybe Done Manually Or Electronically/online. However, Bidders Should Only Select One Mode Of Submission, Either Manual Or Electronic. Similar To Manual Submission, The Guidelines For The Preparation And Submission Of An Electronic Bid Are Contained In The Bds. 10. Bids Must Be Duly Received By The Bac Secretariat At The Address Below For Manual Submission Or At Electronicbids_davaooriental2@dpwh.gov.ph For Electronic Submission On Or Before December 12, 2024 @ 10:00 Am. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 18. 11. Bid Opening Shall Be On December 12, 2024 @ 10:00 Am At 3rd Floor Conference Room, Dpwh Compound, Brgy. Matiao, City Of Mati, Davao Oriental. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. Late Bids Shall Not Be Accepted. 12. The Dpwh Davao Oriental 2nd Deo, Mati, Davao Oriental Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 13. For Further Information, Please Refer To: Pedro P. Raagas, Jr. Bac Vice-chairperson (087) 811-7576 (tele/fax Number) Rowena A. Aquino Head, Bac Secretariat (087) 811-7576 (tele/fax Number) Matidpwh@gmail.com

Description: * Refer To Gk12500331 Scope # Spotting Scope Powerful 20-60x Zoom Eyepiece Allows You To Make Detailed Observations And Identifications At Extreme Long-range # Oversized 80mm Objective Lens Helps To Ensure Views Remain Bright And Clear, Even When Viewing Subjects At Long Range On Maximum Magnification And In Challenging Light Conditions; Also Makes The Spotting Scope Ideal As A Starter Telescope For Lunar And Planetary Viewing And Surveying Constellations # Bak4 Porro Prism Glass Delivers A Round Exit Pupil And A Crisp And Clear Image With Limited Edge Distortion # Anti-reflection Fully Multicoated Optics Maximize Light Transmission While Improving Colour Rendition, Contrast, And Clarity # Proprietary Exo Exterior Lens Coatings Resist External Fogging, Scratches, And Abrasions While Allowing Oil, Dirt, And Sap To Be Cleaned Off Without Leaving Smudges Or Residus # 98-foot Field Of View At 1000 Yards At 20x Power, 50-foot At 60x # The Eyepiece Is Set At A 45° Angle To The Optical Tube, Placing The User's Head In A Comfortable Viewing Position Whether Standing, Sitting, Or Lying Prone # Large Textured Single-speed Focusing Knob Ensures Tack-sharp Views # Twist-up Rubber Eyecup For Comfortable Use With Or Without Eyewear # Rotating The Tripod Collar Allows The User To Adjust The Orientation Of The Eyepiece Relative To The Tripod For Optimum Viewing Comfort # Standard 1/4"-20 Mount Is Compatible With Most Quick-release Plates, Heads, Photo/video/field Tripods And Other Support Systems # Long Eye Relief At All Powers Allows The User To Back Off The Eyepiece To Reduce Eye Fatigue And Increase Viewing Comfort During Long Glassing Sessions#even On High Magnification # 3.6mm Exit Pupil At 20x Magnification Will Cover Most Pupils As They Open And Dilate In Low Light # Spotting Scope Small Picatinny/weaver Rail On The Side Of The Housing Enables You To Mount Accessories, Like A Dot Sight Or Laser, To Enhance The Usability # Lightweight And Durable Aluminium Alloy Chassis # Rubber Armour Protects The Optical Tube From Impacts And Bumps While Providing A Sure Grip During Setup And Breakdown#even In Cold And Wet Conditions # The Optical Tube Is Nitrogen Filled And O-ring Sealed To An Ip67 Rating, Making It Water, Dust, And Resistant To Internal Fogging In Extreme Conditions # Extendable Sunshade Prevents Flare When Looking In The Direction Of The Sun#improving Contrast And Clarity, Especially When The Sun Is Low On The Horizon At Dawn And Dusk Contact Person : Kyle October 0214446401 076 870 2549 * Spotting Scope # Build-in Type Slide Hood. # Lead-and Arsenic-free Eco-glass. # A Stay-on Case Is Included. # Lightweight # Minimized Colour Aberration At The Edge Of The Field Of View And Long Eye Relief Are Achieved With The Newly Developed Zoom Eyepiece Lens. # Large Objective Lens (60mm <(>&<)> 82mm) For A Brighter Field Of View. # Main Body And The Eyepieces Are Multilayer Coated Lenses And Prism. # Waterproof (up To 1m For 10 Minutes) And Fog-free With O-ring Seals And Nitrogen Gas In The Main Body. Water-resistant Eyepiece Lenses. # The Digiscoping Mount Which Can Be Connected To A Wide Variety # Two Screw Mounting Holes Of The Main Body Are Provided For Stable Mounting On A Tripod Adjustable For Use With Or Without A Digiscoping System. # Stylish And Compact Design. Type Angle Objective Diameter (mm) 82 Close Focus Distance (m) 6.1 Length (mm) 392*1 Height X Width (mm) 113x95*1 Weight (g) 960 Coating, Optics Fully Multilayer Coated, Phase Correction Coating Waterproofness Filled With Nitrogen Gas, Up To 1m Under Water For 10 Min. Screw Holes For Tripod 2 Screw Holes To Balance The Body With Or Without Dsrl Camera Zoom Attachment Fsa-l2 + D-slr Or Digiscoping Systems. Eyepiece Mount Type Bayonet Built-in Type Slide Hood Yes Compatibility With Current Eyepieces Of Spotting Raiii Series Yes Contact Person : Kyle October 0214446401 076 870 2549 * Binoculars The Black Binocular A Handheld Fixed-magnification Optic With Multicoated Aspherical Lenses And An Ergonomically-designed Housing. # Aspheric Eco-glass Elements # Porro Prism Design # Multicoated Optics # Wide Angle Viewing # Closed-bridge Configuration # Center Focus Wheel # Twist-up Rubber Eyecups # Rubber Armored Housing Sculpted Rubber-armored Housing That Is Designed To Fit Comfortably Into The Observer's Hand And Provide Non-slip Handling. Grooved Ridges Atop The Housing And A Generously-sized Focusing Wheel Enable Adjustments To The Interpupillary Distance And The Point Of Focus Even While Wearing Gloves. Turn-and-slide Eyecups Allow Quick Adjustment To The Eye Relief. Optical Performance # 16x Magnification, 50mm Objectives # Arsenic-free Eco-glass Elements # Multicoated Optics, Bak-4 Porro Prisms # 67m Field Of View At 1000 Yd # 60.8° Apparent Viewing Angle # 9m Minimum Focus Distance # 12.6mm Eye Relief, 3.1mm Exit Pupil Use And Handling # Turn-and-slide Twist-up Rubber Eyecups # Centre Focus Wheel Construction Details # Ergonomic Sculpted Rubber Armouring # Black Housing Finish # 924g Weight Contact Person : Kyle October 0214446401 076 870 2549 * Tripod The Black Tripod With Ball Head Is A 4-section Support Weighing 1.59 Kg With A Twist Leg-lock System. To Extend The Tripod To Its Maximum Height Of 160 Cm, Turn The Twist Leg Locks To Disengage And Extend The Legs Along The Rapid Centre Column. The Tripod Can Also Be Set Up Close To The Ground By Splaying The Legs Out In Its Two-leg Position. For Transport Or Storage, The Legs Fold In The Reverse To A Compact 42.42 Cm And Are Easily Carried In The Included Carrying Bag. As Part Of The Tripod, The Arca-type Compatible Ball Head Has A Main Locking Knob To Control The Ball Movement And An Independent Pan-locking Knob For The 360° Rotation Of The Head. The Ball Head Has A 200pl-pro Aluminum Plate That Is Compatible With Other Arca-type And Rc2 Quick Release Systems. The Head's Load Capacity Is 7.98 Kg, So It Can Support Mirrorless To Large Dslr Cameras Without Difficulty. # Load Capacity: 7.98 Kg # Maximum Height: 160 Cm # Folded Length: 42.42 Cm # Leg Sections: 4 # Weight: 1.59 Kg # Two Leg Angle Positioning # Rapid Center Column # Twist Leg Lock System # Arca-type Compatible Ball Head # Arca-type <(>&<)> Rc2 Compatible Qr Plate Contact Person : Kyle October 0214446401 076 870 2549 * Scope Plate # Designed To Eliminate Unwanted Rotation Of The Spotting Scope # It Can Be Used To Mount All Makes Of Spotting Scope # Made From Machine-tooled Aluminium With A Black Anodised Finish # 2 Grub Set Screws To Lock The Spotting Scope Securely This Adapter Plate Has Been Specifically Designed To Eliminate Unwanted Rotation Of The Spotting Scope During Viewing. Its Universal Design Means It Can Be Used To Mount All Makes Of Spotting Scope, No Matter What Their Foot Shape (square, Rectangular, Trapezium), On Any Manfrotto Two-way Head With Rapid Rc2 Connector System. The Adapter Is Made From Machine-tooled Aluminum With A Black Anodised Finish. In Addition To The Standard 1/4' Screw, It Has Two Grub Set Screws To Lock The Spotting Scope Securely In Position. Contact Person : Kyle October 0214446401 076 870 2549 * Compressor # 4×4 Air Compressor (12v # 160lpm) # Air Output: 160 Lpm # Maximum Working Pressure: 120 Psi # Maximum Restart Pressure: 150 Psi # Maximum Amperage Draw: 45a # Voltage: 12 Volt Dc # Heavy Duty Storage Bag # With Amperage Over-load Protector, # Automatic Reset # Cylinder Diameter: 60mm Contact Person : Kyle October 0214446401 076 870 2549 Wherever Reference Is Made To Any Particular Trade Mark, Name, Patent, Design, Type, Specific Origin Or Producer, Such Reference Shall Be Deemed To Be Accompanied By The Words "or Equivalent". Nb!!! Please Ensure That You Attach The Technical Data Sheets And Pictures Of The Item Quoted On, To Your Rfq Submission****failure To Adhere To This Requirement, Will Result In Your Offer Being Non-responsive**** If There Is No Sample Pictures And Specifications Your Quotation Will Be Disregarded As Non-responsive. Allocation Of Preference Points *nb: The Municipal Bidding Document 6.1 (mbd 6.1) Has Been Amended, In Order To Be Eligible For Preference Points Bidders Are Required To Submit A Duly Completed Mbd 6.1 Document With Supporting Documents With Each And Every Rfq Submission. In Order To Qualify For Preference Points, It Is The Responsibility Of The Bidder To: Submit A Duly Completed Mbd 6.1 Form (bidders Must Indicate How They Claim Points For Each Specific Goal). Submit Documentary Proof Of Updated Bbbee Certificate/sworn Affidavit And/or Cipc Certificate With Each Rfq Submission To Validate Specific Goals. (if A Bidder Is Registered And Active On The City#s Supplier Database And Has Submitted The Bbbee Certificate/ Sworn Affidavit/ Cipc Certificate, The Submission Of Said Documents Is Not Necessary). It Is Therefore Incumbent On Suppliers To Ensure That Documents Are Kept Updated. Failure To Comply With The Above Will Result In A Zero (0) Allocation For Preference Points. *** Please Ensure That All Required Insurances Such As Your Public Liability, Employers Liability Or Coida And Motor Vehicle Insurance Are Attached And That They Are Up-to-date. If You Utilise Couriers And Do Not Have Motor Vehicle Insurance, Then Please Mention This. Also Ensure That Your Updated Declaration Of Interest And Bbbee Is Attached At All Times***

Details: The purpose of the framework agreement is to provide services for spreading and supplying road melting products for treating the roads of the Normandy and Tancarville bridge concessions during the winter period. The purpose of the winter treatment operations is to: - Ensure the safety of road users; - Allow traffic to flow; - Restore traffic conditions to level C1 as soon as possible.

Details: Description Invitation To Bid For 25ka0027 Completion Of Water System, Brgy. Kalagangan, San Fernando, Bukidnon Barangay Kalagangan, San Fernando, Bukidnon 2nd Ld 1. The Department Of Public Works And Highways – Bukidnon 1st District Engineering Office, Malaybalay City, Through The Fy 2025 Nep (national Expenditure Program) Intends To Apply The Sum Of Php14,700,000.00 Being The Approved Budget For The Contract (abc) To Payments Under The Contract For 25ka0027 Completion Of Water System, Brgy. Kalagangan, San Fernando, Bukidnon Barangay Kalagangan, San Fernando, Bukidnon 2nd Ld. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening 2. The Department Of Public Works And Highways – Bukidnon 1st District Engineering Office, Malaybalay City Through Its Bids And Awards Committee Now Invites Bids For The Hereunder Works: Contract Id : 25ka0027 Contract Name : Completion Of Water System, Brgy. Kalagangan, San Fernando, Bukidnon Contract Location : Barangay Kalagangan, San Fernando, Bukidnon 2nd Ld Scope Of Work : Construction Of 1 Unit 113.1 Cu.m Capacity Rc Ground Reservoir, Construction Pipeline Suspension Bridge, Pipelaying Of 6" Dia. Hdpe Pipe Sdr 11 (5,304.00 Lm), 4" Dia. Hdpe Pipe Sdr 11 (1,500.00 Lm), Installation Of Stand Pipe With Water Meter. Approved Budget For The Contract (abc) : Php14,700,000.00 Source Of Fund : Fy 2025 National Expenditure Program (nep) Contract Duration : 155 Cd Bid Documents Fee In Php : Php 25, 000.00 3. Prospective Bidders Should Be (1) Registered With And Classified By The Philippine Contractors Accreditation Board (pcab) With Pcab License Category Of C & D For Small B. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Annex Ii-1.1 B Section Ii And Iii Of Bidding Documents. Contractors/applicants Who Wish To Participate In This Bidding Are Encouraged To Enroll In The Dpwh Civil Works Application (cwa) At The Dpwh Procurement Service (prs), 5th Floor, Dpwh Bldg., Bonifacio Drive, Port Area, Manila, While Those Already Enrolled Shall Keep Their Records Current And Updated. The Contractor’s Eligibility To Bid On The Project Will Be Determined Using The Dpwh Contractor Profile Eligibility Process (cpep) And Subject To Further Post-qualification. Information On Registration Can Be Obtained From The Prs During Working Weekdays From 7:00 Am To 4:00 Pm Or At The Dpwh Website Www.dpwh.gov.ph. 4. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary Pass/fail Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184), Otherwise Known As The "“government Procurement Reform Act”. The Contract Shall Be Awarded To The Lowest Calculated Responsive Bidder (lcrb) Who Was Determined As Such During Post-qualification. 5. Interested Bidders May Obtain Further Information From The Department Of Public Works And Highways – Bukidnon 1st District Engineering Office, Malaybalay City And Inspect The Bidding Documents At Capitol Compound, Malaybalay City During Weekdays From 8:00 Am – 5:00 Pm. 6. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 07, 2024, From The Address Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Php 25,000.00. 7. It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps), And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 8. The Department Of Public Works And Highways – Bukidnon 1st District Engineering Office, Malaybalay City Will Hold A Pre-bid Conference On November 15, 2024, 10:00 Am Via Zoom With Meeting Id: 923 1132 1070 And Passcode: Dpwh2024 And The Bidder May View Through Live Streaming (youtube Channel) Dpwh Bukidnon 1st Deo Procurement Ls, Which Shall Be Open To Prospective Bidders. 9. Bid Submission Maybe Done Manually Or Electronically/online. However, Bidders Should Only Select One Mode Of Submission, Either Manual Or Electronic. Similar To Manual Submission, The Guidelines For The Preparation And Submission Of An Electronic Bid Are Contained In The Bds. 10. Bids Must Be Duly Received By The Bac Secretariat At The Address Below For Manual Submission Or At Electronicbids_bukidnon1@dpwh.gov.ph For Electronic Submission On Or Before November 29, 2024 Until 10:00 Am. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 18. 11. Bid Opening Shall Be On November 29, 2024, 10:00 Am At Conference Room, Dpwh-bukidnon 1st Deo. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. Late Bids Shall Not Be Accepted. 12. The Department Of Public Works And Highways – Bukidnon 1st District Engineering Office, Malaybalay City Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 13. For Further Information, Please Refer To: Rosmendo C. Bongocan, Jr. Engineer Iii Head, Procurement Unit Telefax No. (088) 813-2087 Cellphone No.09178765473 Bongocan.rosmendo_jr@dpwh.gov.ph 14. You May Visit The Following Websites: For Downloading Of Bidding Documents: Www.dpwh.gov.ph And Philgeps Website For Online Bid Submission: Electronicbids_bukidnon1@dpwh.gov.ph Approved By: Sarah Jane B. Lagrama Bac Chairperson Date Of Publication: November 07, 2024

Purchaser Name: cc of bridge audemer val de risle | Evolution and Security of the Information System

Purchaser Name: cc of bridge audemer val de risle | Evolution and Security of the Information System

Purchaser Name: cc of bridge audemer val de risle | France – Computer Equipment And Supplies – Evolution Et Sécurisation Du Système D'information

Details: Description Section 1. Invitation To Bid Republic Of The Philippines Province Of Nueva Vizcaya Municipality Of Kasibu Barangay Didipio Invitation To Bid For The Project: Improvement Of Farm To Market Road Between Purok 6 To Purok 2 (road Concreting) Minimum Pcab License Required: Small B On Roads, Highways And Bridges The Barangay Alimit-kasibu, Nueva Vizcaya, Through The Financial Assistance From Plgu Nueva Vizcaya 2024 Intends To Apply The Sum Of Nine Hundred Sixty-nine Thousand Two Hundred Twenty-eight Pesos And 96/100 (php 969,228.96) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For The Improvement Of Farm To Market Road Between Purok 6 To Purok 2 (road Concreting). Invitation Number: 058-2024. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 1. The Barangay Didipio-kasibu, Nueva Vizcaya Now Invites Bids For The Above Procurement Project. Completion Of The Works Is Required Fifty-one Working Days (51). Bidders Should Have Completed A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 2. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non- Discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. 3. Interested Bidders May Obtain Further Information From The Barangay Didipio- Kasibu, Nueva Vizcaya-bac Secretariat And Inspect The Bidding Documents At The Address Given From 8:00am To 5:00pm. 4. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 8, 2024 From Given Address And Website/s Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of One Thousand Pesos Only (php 1,000.00). The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees Personal. 5. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Bac Office, Didipio Barangay Hall On Or Before November 27, 2024 At 9:00am. Late Bids Shall Not Be Accepted. 6. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 16. 7. Equipment Needed For The Project Are As Follows: 1 Unit Motorized Road Grader 1 Unit Vibratory Road Roller 1 Unit Backhoe 0.80 Cu.m 1 Unit Dump Truck 5.0 Cu.m 1 Unit Water Truck 1 Unit One Bagger Mixer 8. Bid Opening Shall Be On November 27, 2024 At 9:30am At The Barangay Hall-session Room. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 9. The Barangay Didipio-kasibu, Nueva Vizcaya Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Implementing Rules And Regulations (irr) Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 10. For Further Information, Please Refer To: Angela Joy H. Dulnuan Head, Bac Secretariat Cp# 09959083554 Raquel T. Ananayo Member, Bac Secretariat Cp# 09677912309 Lalain L. Ananayo Member, Bac Secretariat Cp# 09568362428 Divina Nagangi Member, Bac Secretariat Cp# 09271479461

Details: Description Section 1. Invitation To Bid Republic Of The Philippines Province Of Nueva Vizcaya Municipality Of Kasibu Barangay Didipio Invitation To Bid For The Project: Concreting Of Farm To Market Road (jacinto Guay-antonio Dingcog Section) Itb # 057-2024 Minimum Pcab License Required: Small B On Roads, Highways And Bridges The Barangay Didipio-kasibu, Nueva Vizcaya, Through The Financial Assistance From Plgu Nueva Vizcaya 2024 Intends To Apply The Sum Of Nine Hundred Sixty-nine Thousand Four Hundred Twelve Pesos And 24/100 (php 969,412.24) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For The Concreting Of Farm To Market Road (jacinto Guay-antonio Dingcog Section) Invitation Number: 057-2024. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 1. The Barangay Didipio-kasibu, Nueva Vizcaya Now Invites Bids For The Above Procurement Project. Completion Of The Works Is Required Fifty-two Working Days (52). Bidders Should Have Completed A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 2. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Nondiscretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. 3. Interested Bidders May Obtain Further Information From The Barangay Didipiokasibu, Nueva Vizcaya-bac Secretariat And Inspect The Bidding Documents At The Address Given From 8:00am To 5:00pm. 4. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 5, 2024 From Given Address And Website/s Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of One Thousand Pesos Only (php1,000.00). The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees Personal. 5. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Bac Office, Didipio Barangay Hall On Or Before November 25, 2024 At 9:00am. Late Bids Shall Not Be Accepted. 6. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 16. 7. Equipment Needed For The Project Are As Follows: 1 Unit-motorized Road Grader 1 Unit-vibratory Road Roller 1 Unit-backhoe 0.80 Cu.m 1 Unit-dump Truck 5.0 Cu.m 1 Unit-water Truck 1 Unit-one Bagger Mixer 8. Bid Opening Shall Be On November 25, 2024 At 9:30am At The Barangay Hall- Session Room. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 9. The Barangay Didipio-kasibu, Nueva Vizcaya Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Implementing Rules And Regulations (irr) Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 10. For Further Information, Please Refer To: Angela Joy H. Dulnuan Head, Bac Secretariat Cp# 09959083554 Raquel T. Ananayo Member, Bac Secretariat Cp# 09677912309 Lalain L. Ananayo Member, Bac Secretariat Cp# 09568362428 Divina Nagangi Member, Bac Secretariat Cp# 09271479461

Details: Description Scope Of Works: Item 1. General Requirements 1.1. Construction Safety & Health, Project Billboards & Signages, Etc. Qty.: 1.00 Lot Item 2. Site Works 2.1. Excavation Labor (column Footing, Footing Tie Beam) Qty.: 94.60 Cu.m. F1 C1= 14.70 Cu.m.- 5 Pcs.- 1.40 X 1.40 X 1.50m F2 C2= 39.70 Cu.m.- 5 Pcs.- 2.30 X 2.30 X 1.50m F3 C3= 33.10 Cu.m.- 5 Pcs.- 2.10 X 2.10 X 1.50m Footing Tie Beam= 7.10 Cu.m.- 0.30 X 0.50 X 15.60m 2.2. Backfill Labor (column Footing Soil On Site Backfilling) Qty.: 64.29 Cu.m. F1 C1= 10.35 Cu.m. F2 C2= 29.50 Cu.m. F3 C3= 24.44 Cu.m. 2.3. On Fill (flooring At Classrooms & Hallways) Qty.: 50.00 Cu.m. V= 164.47 X 0.25= 41.12 + 20% (compacted Volume)= 49.34 Cu.m. 2.4. Gravel Bedding (2" Thick)- Flooring At Toilets/ Electrical Room Qty.: 9.50 Cu.m. 2.5. Equipment Rental Qty.: 1.00 Lot Item 3. Formworks & Scaffoldings Qty.: 1.00 Lot Item 4. Concrete & Reinforcements 4.1.a. F1 C1- Column Footings Qty.: 3.43 Cu.m. V= 1.40 X 1.40 X 0.35m X 5 Sets= 3.43 Cu.m. 4.1.b. F2 C2- Column Footings Qty.: 9.26 Cu.m. V= 2.30 X 2.30 X 0.35m X 5 Sets= 9.26 Cu.m. 4.1.c. F3 C3- Column Footings Qty.: 7.72 Cu.m. V= 2.10 X 2.10 X 0.35m X 5 Sets= 7.72 Cu.m. 4.2.a. C1- Columns Qty.: 6.76 Cu.m. V= 0.40 X 0.40 X 8.45m X 5 Columns= 6.76 Cu.m. 4.2.b. C2- Columns Qty.: 6.76 Cu.m. V= 0.40 X 0.40 X 8.45m X 5 Columns= 6.76 Cu.m. 4.2.c. C3- Columns Qty.: 6.76 Cu.m. V= 0.40 X 0.40 X 8.45m X 5 Columns= 6.76 Cu.m. 4.3.a. Ftb-1- Footing Tie Beam Qty.: 0.95 Cu.m. V= 0.30 X 0.50 X 6.30m= 0.95 Cu.m. 4.3.b. Ftb-2- Footing Tie Beam Qty.: 2.97 Cu.m. V= 0.30 X 0.50 X 19.80m= 2.97 Cu.m. 4.3.c. Ftb-3- Footing Tie Beam Qty.: 7.74 Cu.m. V= 0.30 X 0.50 X 51.60m= 7.74 Cu.m. 4.3.d. G1- 2nd Floor Beams Qty.: 1.64 Cu.m. V= 0.25 X 0.40 X 16.40m= 1.64 Cu.m. 4.3.e. G2- 2nd Floor Beams Qty.: 1.64 Cu.m. V= 0.25 X 0.40 X 16.40m= 1.64 Cu.m. 4.3.f. G3- 2nd Floor Beams Qty.: 1.64 Cu.m. V= 0.25 X 0.40 X 16.40m= 1.64 Cu.m. 4.3.g. G6- 2nd Floor Beams Qty.: 1.05 Cu.m. V= 0.25 X 0.40 X 10.50m= 1.05 Cu.m. 4.3.h. G7- 2nd Floor Beams Qty.: 4.38 Cu.m. V= 0.25 X 0.50 X 35.00m= 4.38 Cu.m. 4.3.i. B1- 2nd Floor Beams Qty.: 1.80 Cu.m. V= 0.25 X 0.40 X 18.00m= 1.80 Cu.m. 4.3.j. Rg1- Roof Level Qty.: 4.32 Cu.m. V= 0.20 X 0.40 X 54.00m= 4.32 Cu.m. 4.3.k. Rg2- Roof Level Qty.: 1.00 Cu.m. V= 0.20 X 0.40 X 12.50m= 1.00 Cu.m. 4.3.l. Rg3- Roof Level Qty.: 3.50 Cu.m. V= 0.20 X 0.50 X 35.00m= 3.50 Cu.m. 4.3.m. Lintel Beam At Parapet Wall Qty.: 0.74 Cu.m. V= 0.15 X 0.30 X 16.40m= 0.74 Cu.m. 4.4.a. Ground Floor Slab Qty.: 17.50 Cu.m. V= 175sq.m. X 0.10m= 17.50 Cu.m. 4.4.b. Second Floor Slab Qty.: 22.25 Cu.m. V= 178sq.m. X 0.125m= 22.25 Cu.m. 4.4.c.1. Stiffener Column Qty.: 0.81 Cu.m. V= 0.15 X 0.30 X 3.00m X 6 Sets= 0.81 Cu.m. Ground- Second, Second- Roof Beam 4.4.c.2. Stiffener Column At Parapet Wall Qty.: 0.44 Cu.m. V= 0.10 X 0.40 X 2.20m X 5 Sets= 0.44 Cu.m. Roof Beam- Top Of Parapet Wall 4.5. Equipment Rental Qty.: 1.00 Lot Item 5. Masonry Works 5.1. Chb Laying @ Ground Floor & Second Floor Walls Qty.: 300.52 Sq.m. Total Area= 300.52 Sq.m. (6" Chb) 16mm Thk. Plaster 5.2. Chb Laying @ Parapet Walls Qty.: 42.00 Sq.m. Total Area= 42.00 Sq.m. (4" Chb) 16mm Thk. Plaster One Side Only 5.3. Chb Laying @ Concrete Railings 5.3.a. Ground Floor Qty.: 17.28 Sq.m. Total Area= 17.28 Sq.m. (4" Chb) 16mm Thk. Plaster 5.3.b. Second Floor Qty.: 16.65 Sq.m. Total Area= 16.65 Sq.m. (4" Chb) 16mm Thk. Plaster 5.4. Plastering At Column & Beams Qty.: 395.00 Sq.m. Column Total Area= 153.60 Sq.m. (4" Chb) 16mm Thk. Plaster Beam Total Area= 240.98 Sq.m. (4" Chb) 16mm Thk. Plaster Total Area= 395.00 Sq.m. 5.5. Chb Laying @ Concrete Stair At Entrance Qty.: 1.00 Lot Concrete Slab At Stair 4" Thk. 5.6. Equipment Rental Qty.: 1.00 Lot Item 6. Steel Works 6.1.a. Roof Framing Qty.: 1.00 Lot 6.1.b. Tool/ Equipment Rental Qty.: 1.00 Lot 6.1.c. Roofing And Accessories (materials Including Installation & Delivery) Qty.: 1.00 Lot 6.2. Sidings Adjacent To Parapet Walls @ Right And Left Side Elevation 6.2.a. Steel Framing Qty.: 12.70 Sq.m. 6.2.b. Flashing And Accessories Qty.: 1.00 Lot 6.2.c. Tool/ Equipment Rental Qty.: 1.00 Lot 6.2.d. Scaffoldings Qty.: 1.00 Lot 6.3.a. Window Grills @ W2 (window 2) Qty.: 1.00 Lot 6.3.b. Steel Railings Above Concrete Handrails Qty.: 1.00 Lot (ground Floor, Second Floor And Bridge Railings) 6.3.c. Tool/ Equipment Rental Qty.: 1.00 Lot Item 7. Doors & Windows 7.1. Doors & Accessories Qty.: 1.00 Lot 7.2. Windows Accessories (materials Including Installation & Delivery) Qty.: 1.00 Lot Item 8. Hallway At 2nd Floor (connection To Existing Building From Proposed Building) 8.1. G8- 2nd Floor Beams Qty.: 0.90 Cu.m. V= 0.25 X 0.40 X 4.50 X 2= 0.90 Cu.m. 8.2. Rg1- Roof Level Qty.: 0.72 Cu.m. V= 0.20 X 0.40 X 4.50 X 2= 0.72 Cu.m. 8.3. Second Floor Bridge Slab Qty.: 1.406 Cu.m. V= 11.25sq.m. X 0.125m= 1.406 Cu.m. 8.4. Roof Framing Qty.: 1.00 Lot 8.5. Roof Girt Qty.: 3.00 Sets 8.6. Tool/ Equipment Rental Qty.: 1.00 Lot 8.7. Roofing And Accessories (materials Including Installation & Delivery) Qty.: 1.00 Lot 8.8. Chb Laying @ Concrete Railings 8.8.a. Ground Floor Qty.: 17.28 Sq.m. Total Area= 17.28 Sq.m. (4" Chb) 16mm Thk. Plaster 8.9. Formworks & Scaffoldings Qty.: 1.00 Lot Item 9. Water Proofing & Moisture Protection 9.1. Water Proofing Of Rear Elevation Wall (façade & Parapet Walls) Qty.: 125.00 Sq.m. 9.2. Water Proofing Of Interior Walls Facing The Windows At Rear Elevation (4 Classrooms) Qty.: 125.00 Sq.m. 9.3. Parapet Wall Moisture Protection (flashing At Top) Qty.: 1.00 Lot 9.4. Scaffoldings Qty.: 1.00 Lot Item 10. Plumbing Works 10.1. Stormwater Drainage Line Qty.: 1.00 Lot Item 11. Ceiling Works 11.1. Ceiling Eaves At Second Floor Qty.: 58.80 Sq.m. Dimension= 42.00m Length X 1.40m Width 11.2. Ceiling At Interior (furring & Accessories Only) Qty.: 1.00 Lot 11.3. Scaffoldings Qty.: 1.00 Lot