Biometric Tenders

Description: CATEGORY: Tablet Based Biometric Attendance System (V2) (Q2)

Details: Synopsis this Is A Synopsis For Construction Prepared In Accordance With The Format In Far Part 36, As Supplemented With Additional Information Included In This Notice. The Solicitation Number Sp4703-25-b-0003 Is To Be Issued As An Invitation For Bid (ifb). The Resulting Contract Will Be A Firm-fixed Price Award With An Expected Period Of Performance Of One Year From Issuance Of The Notice To Proceed. This Acquisition Is Set-aside For 100% Small Businesses. The North American Industry Classification System (naics) Code Is 236220 (miscellaneous Building Renovation). The Small Business Size Standard Is $45m. Department Of Labor Wage Determination Based On Location Of The Service Provided (chesterfield County, Va). Partial Proposals Will Not Be Accepted. for An Offer To Be Considered For Award, The Contractor Must Have A Physical Office From Which Mobilization Occurs Within 120 Miles To Dscr. the Contractor Must Be Registered In The System For Award Management (sam) Prior To Award. If Not Already Registered In Sam, Go To The Sam Website Www.sam.gov To Register Prior To Submitting Your Quote. access To Defense Supply Center Richmond Is Dictated By The Language At The Following Location: https://www.dla.mil/aviation/installation/visitors-and-id-office/ a New System Will Be Implemented On 3 January 2023 To Screen Visitors And Contractors For Installation Access At Dscr. The New System Is Designed To Increase Efficiencies, Enhance The Protection Of Personal Information During The Vetting Process And Eliminate The Use Of Hard Copy Dla Form 1815s. the Screening System Will Require Visitors And Contractors To Pre-enroll In Dbids (defense Biometric Identification System). To Begin The Process, Visitors And Contractors Will Complete Registration Through The Pre-enrollment Website: Https://dbids-global-enroll.dmdc.mil. upon Entry Of Their Information, Visiting Personnel Will Be Provided An Electronic Form To Download, Which Will Have An Individualized Barcode And Alpha Numeric Code. The Codes Will Be Electronically Sent To The Visiting Person’s Sponsor. Once In Receipt Of The Barcode, The Sponsor Will Email Security And Emergency Services And Provide The Barcode And Sponsorship Information. Once The Visitor/contractor Is Vetted And Approved For Installation Access, Security & Emergency Services Will Notify The Sponsor That The Visitor/contractor Can Go To The Dscr Visitor Center To Obtain His/her Pass. At The Visitor Center, The Visitor Provides The Barcode And Code Provided Earlier In The Process And Completes The Credentialing Process. dbids Enrollments Shall Be Completed With Five (5) Days Before The Site Visit.

Description: Supply And Delivery Of Monoblock Chair, Office Tables And Biometric For North Western Kidapawan Super Health Center San Isidro, Mua-an Uban Super Health Center, Western Kidapawan Super Health Center B , Office Supplies And Devices ,city Of Kidapawan, North Cotabato

Description: CATEGORY: Bullet Camera 5MP , Dome Camera 5MP , Server Rack 42U , Workstation for Display , Server with License Pack , Network attached Storage Device , Video management software , Layer 2 Access Switch , Cat 6 patch panel , Cat 6 Patch Cord , Cat 6 Cable , Workstation for Biometric and RF Machine , Access Control Bio Metric Machine with software including all accessories , Radio frequency identification workflow RFID CARD

Description: Aadhaar Biometric Equipments With Support And Services

Description: CATEGORY: Tablet Based Biometric Attendance System (V2) (Q2)

Description: Biometric Attendance System

Details: Notice Of Sources Sought. requesting: 1. Written Notification By Qualified And Interested Vendors 2. Market Research Quote For The Services Requested In The Attached Statement Of Work ***please See Attachment For Full Statement Of Work**** statement Of Work replacement Chillers, Hq0448516562 for The Defense Finance And Accounting Service Events (rome, New York) 1.0. Purpose: The Purpose Of This Contract Is To Replace Three (3) Existing Air-cooled, Rtaa Packaged Chiller Units With New Hermetic Rotary Refrigeration Machines To Provide Chilled Water Cooling To Meet The Comfort Cooling Needs Of The Facility. The Work To Be Performed Under This Contract And In Accordance With This Statement Of Work (sow) Shall Consist Of Furnishing, All Necessary Plant, Labor, Tools, Transportation, Supplies, Supervision, Equipment, Materials, And Incidentals Necessary For Providing All Work Shown In This Sow, And All Applicable Codes, Regulations, Standards, Meet Ashrae 90.1-2001 Efficiency Guidelines, And Criteria In Effect At The Date Of Solicitation. 2.0 Scope: The John S. Mccain National Defense Authorization Act (ndaa) Section 889 Applies To All Components Of This Requirement. The Contractor Shall Provide Labor, Service, Supervision, Personnel, Parts, Tools, Materials, Equipment, Installation, Programming, Hardware, Software, Licensing, And Other Items And Services As Needed For The Completion Of Av Support. The Contractor Shall Provide Project Management Of The Services Identified In This Pws. The Contractor Shall Provide Travel Expenses For All Contractor Personnel. 3.0 General Requirements: The Contractor Shall Provide All Necessary Personnel, Equipment, Supplies, Transportation, Tools, Materials, Supervision, And Other Non-personal Services For Comprehensive Removal, Replacement Of Three (3) Rtaa Chillers At The Defense Finance And Accounting Service (dfas) Rome, New York As Detailed In This Statement Of Work (sow) 3.1 Chiller #1. 130 Tons: Remove Existing Model: Rttaa 1304 Yt01 A3c0 B. Serial #: U99j01971., Outdoor Air-cooled Chiller, With Freeze Protection, And Provide, New, For Comfort Cooling, 130 Tons., Rtaa Hermetic Rotary Compressor Refrigeration Air Cooled Chiller, High Efficiency With Applicable Low Ambient Operation, Freeze Protection, System Control Integration To The Existing Building Automation System Communication Interface (bas), And New 20amp, 120v Duplex Weathertight Outlet. New Exterior Chilled Water Piping (supply & Return) As Well As New Line Gauges, Vibration Eliminator, Vent, Thermometer, Water Strainer, Gate Valve, Valve Pressure Gage, New Insulation With Aluminum Shielding And Proper Piping Supports. Existing Chiller Concrete Pad Dimensions Are Approximate: 103” W X 286” L. Contractor Shall Verify All Rtaa Specifications And Dimensions. 3.2 Chiller #2. 90 Tons: Remove Existing Model: Rtaa 0904 Yt01 A3d0 Bf. Serial #: U99j01996., Outdoor Air-cooled Chiller, With Freeze Protection, And Provide New, For Comfort Cooling, 90 Tons., Rtaa Hermetic Rotary Compressor Refrigeration Air Cooled Chiller, High Efficiency With Applicable Low Ambient Operation, Freeze Protection, System Control Integration To The Existing Building Automation System Communication Interface (bas), And New 20amp, 120v Duplex Weathertight Outlet. New Exterior Chilled Water Piping (supply & Return) As Well As New Line Gauges, Vibration Eliminator, Vent, Thermometer, Water Strainer, Gate Valve, Valve Pressure Gage, New Insulation With Aluminum Shielding And Proper Piping Supports. Existing Chiller Concrete Pad Dimensions Are Approximate: 100” W X 216” L. Contractor Shall Verify All Rtaa Specifications And Dimensions. 3.3 Chiller #5. 80 Tons: Remove Existing Model: Rtaa 0804 Yt01 A3c0 B., Serial #: U07m06563., Outdoor Air-cooled Chiller, With Freeze Protection, And Provide New, For Comfort Cooling, 80 Tons., Rtaa Hermetic Rotary Compressor Refrigeration Air Cooled Chiller, High Efficiency With Applicable Low Ambient Operation, Freeze Protection, System Control Integration To The Existing Building Automation System Communication Interface (bas), And New 20amp, 120v Duplex Weathertight Outlet. New Exterior Chilled Water Piping (supply & Return) As Well As New Line Gauges, Vibration Eliminator, Vent, Thermometer, Water Strainer, Gate Valve, Valve Pressure Gage, New Insulation With Aluminum Shielding And Proper Piping Supports. Existing Chiller Concrete Pad Dimensions Are Approximate: 108” W X 240” L. Contractor Shall Verify All Rtaa Specifications And Dimensions. 3.4 Description Of Services: Contractor Shall Remove Existing Intellipak Air-cooled Units, Located On The Exterior Of Building 1. Contractor Will Coordinate With Dfas Cor For Required System Down Time. Chilled Water Systems Are Glycol Treated, Contractor Is Responsible For Drained, Reclaimed And Reintroduced Into The System. Glycol Must Be Tested (glycol Percentage Based On Its Refractive Index) Upon Removal And Documented For Owner Review; Reintroduced System Glycol Will Be At The Same Recorded/tested Level. All Systems Will Be Left In Working Condition Without Leaks. Remove Existing Supply And Return Exterior Chilled Water Piping Up To And Including The Isolation Valves. Remove, Retain, And Re-install System Control Integration To The Existing Building Automation System (bas) Tracer Es., Control Wiring And Materials For Communication From The Chiller To The Bas Monitoring Office. Contractor Shall Update Tracer Es With New Chiller Unit Image, Data, Graphics, And Set Points. Install New From Factory New Rtaa 80, 90, And 130 Ton, Air Cooled Chiller With Correct Voltage Design For The Building. Provide Necessary Electrical Wiring, Conduit, Connections, And Materials Resulting In A Durable And Reliable Power Supply To The New Units. New Chillers Will Be Equipped With Vibration/noise Dampening Features And Be Placed On Current Contract Pads Per Manufactures Specifications. Provide And Install New Exterior Chilled Water Supply/return Lines. For Each Unit, Provide And Install Two New Isolation Valves (butterfly Valves). Provide And Install Two New ¾ Inch Ball Valve Equipped Test/bleed Ports, One In Supply And One In Return. Provide And Install One New Y Strainer In New Supply Line. Install New Piping Support Brackets For Supply And Return Lines; Install New Piping Insulation With Aluminum Exterior Shielding, Insulation Will Be Applied To Isolation Valve, Test Ports, And Y Strainer As Well. Exterior Of Supply And Return Chilled Water piping Will Be Marked With Industry Standard Uv/weather Resistant Markings To Identify “chilled Water Supply” And “chilled Water Return” a.) Contractor Shall Be Responsible For On-site Coordination Of All Staging And Deliveries Of Their Product, To Include Access To And Operation Of Any Equipment Need For Unloading And Movement Of Materials Or Product. b.) Start Up, Training, And Manuals: The Contractor Shall Provide, Schedule, And Arrange For Factory Certified Start-up. Contractor Will Provide Operational, And Maintenance Training As Recommended By The Manufacture, To Train Government Technicians And Provide All Operating, Maintenance, And Parts Manuals Instructions To Include Parts Listing Of Equipment And Other Materials Installed. c.) The Contractor Shall Conduct A Minimum Two (2) Hours Training For On-site Staff Upon Installation Of The Equipment To The End-user At The Government Site. d.) The Contractor Shall Provide Documentation Of Unit Start-up Commissioning And All Recorded Readings. 4.0 Qualifications: The Work For This Project Shall Be Executed In The Best And Most Workmanlike Manner, By Qualified, Trained And Certified Efficient Mechanics/tradesmen, Skilled In Their Respective Trades. Only Certified Journeymen In Each Respective Trade, Or Apprentices Under The Direct Supervision Of Certified Journeymen, Shall Be Permitted To Install And/or Supervise Installation For This Project. Individual Trade Work For This Project Shall Be Performed And Quality Maintained By The Applicable Trade Only. The Contractor Shall Assure That All Trades Coordinate Their Work With That Of Other Trades. The Contractor Shall Coordinate And Perform All Operations In A Manner That Will Result In A Professional And Expeditiously Completed Project. The Work Shall Be In Strict Accordance With Prevailing Industry Standards And Manufacturer’s Instructions. Work And Materials Shall Comply With This Sow And The Editions In Effect At The Time Of This Solicitation For All Applicable Criteria, Regulations, Guidelines, And Codes, All Of Which Are Made A Part Thereof. 5.0 Disposal Of Materials And Cleanup: The Contractor Shall Clean Up After Each Work Period And Dispose Of All Debris At The Close Of Each Day. The Contractor Shall Protect All Structures, Utilities, Vegetation, Sidewalks And Vehicles From Damage At All Times. The Contractor Shall Replace All Damaged Materials With New Materials To The Satisfaction Of The Government, At No Additional Cost To The Government. Removal/disposal Of Obsolete Chiller Unit; The Contractor Will Take Custody Of The Removed Chiller, Piping, And Isolation Valves To Include Any Oil, R-22 Refrigerant And Any Equipment And Materials From The Demolition. Removed Oil And Refrigerant Will Be Disposed Of At A Waste Or Recycle Location Adhering To Epa, Federal, State, City, County And Local Codes By The Contractor. 6.0 Place Of Performance: Defense Finance And Accounting Service-rome, 325 Brooks Rd, Rome, New York, 13441., Bldg 1. 7.0 Period Of Performance: Installation, Set Up, And Start-up Commissioning Of The New Chiller Unit; Removal And Proper Disposal Of The Obsolete Chiller Unit; And Training Of The End User Shall Be Completed Within One Hundred And Forty-nine (149) Days Upon The Award Of Contract. 8.0 Normal Hours Of Operation: Work Hours Shall Be Monday Through Friday 0800- 1600 Hours, Except For Us Federal Holidays. The Contractor Shall Have Prior Writing Approval From The Cor To Work Outside Of These Guidelines To Coordinate With The Site Installation Law Enforcement Personnel. 8.1 Installation Access: All Contractors Arriving At The Installation Access Point Shall Be Preannounced And Be Cleared Prior To Accessing The Installation. A Map And Directions To The Installation Will Be Provided By The Cor. The Contractors Shall Preregister Their Arrival At The Following Website: Defense Biometric Identification, Dbids Https://dbids- Global-enroll.dmdc.mil/preenrollui/#/landing-page. Upon Arrival, The Cor Will Meet Contractor Personnel At The Vehicle Control Center (vcc). Preregistered Contracting Personnel Will Enter The Vcc. Contractor Personnel Shall Bring Their Preregister Letter Or Qrc Scan Code And Valid Photo Identification For Badging. After Badging Has Been Completed, Contractor Vehicles Will Be Searched, And Badges Will Be Scanned Prior To Entry On The Installation. Each Time When Processing Onto The Installation, All Contractor Vehicles Shall Be Searched, And All Badges Shall Be Scanned By Installation Security Forces. 8.2 Visitor Adjudication Matrix: Contractor Personnel Containing Any Of The Following Offenses Shall Not Be Permitted Access To The Installation.

Description: Electronic Auction - Acquisition of Biometric Time Clock

Details: Title: 81313095 - Building Of An Innovative Development Environment And Capacity Building For The Digitalisation Of Public Services description: The Government Of The Republic Of Benin Aims To "transform Benin Into West Africa's Digital Services Platform For Accelerated Growth And Social Inclusion". To Do So, The Government Has Developed A Solid Administrative Framework To Underpin Its Ambitious Development Objectives. A Ministry For Digitalization Was Set Up In 2016, Followed By The Establishment Of Specialized Technical Agencies For Information Security, Infrastructure Development, Information Systems And Services, Etc. The "digital Code" Was Adopted In 2017, Followed By The Strategies On Cybersecurity And Artificial Intelligence. Among The Government"s Flagship Projects Is The "smart Government" Programme Which Aims To Contribute To The Establishment Of A Modern Administration With The Help Of The Agency For Information And Digital Systems (asin). Asin"s Objectives Include The Widespread Use Of Ict In Public Administration And In Benin's Social And Economic Sectors. Over The Past Three Years, Benin Has Made Remarkable Progress In Digital Transformation, Designing National E-government Frameworks And Developing E-services For Citizens And Businesses. A Data Exchange Solution For Public Authorities Was Implemented Based On X-road, The Open-source Technology Used In Estonia. A Public Key Infrastructure Has Already Been Put In Place; An E-payment System Will Follow Shortly. Benin Championed The Smart Africa Digital Id Blueprint To Enhance Cross-border Eid Interoperability And The Government Successfully Conducted A Large Census For The Purpose Of Identifying People, Resulting In Nearly 10 Million Beninese Listed In The National Register Of Persons (npr). Next To Civil Status Data And Biometric Data, The Npr Contains The Personal Identification Number (npi) That Identifies Every Beninese Citizen. Therefore, Npr Is One Of The Foundations For Digital Identity And A Key Element For Public E-services Provided Through A National E-services Portal. The Latter Will Serves As A Single Point Of Entry To All Public Services - Increasing Accountability And Accessibility. While Still Nascent, The Portal Currently Makes Some 250 Public Services Accessible And Will Ultimately Be The Place Where Most Public Services Can Be Accessed Digitally. The German Development Cooperation Supports The Ambitious Reform Agenda Of The Ministry Of Digitalization Through The Digital Transformation Center Approach. The Concept Of The Digital Transformation Centers Is Linked To A Political Initiative Of The Federal Republic Of Germany To Support The Governments Of Partner Countries In Creating Mechanisms And Instruments For The Development, Implementation And Dissemination Of Digital Solutions. In Benin, The Digital Transformation Center Has Worked On Three Topics: Digital Administration, Digital Entrepreneurship And Digital Learning. The Beninnovation Project Aims At Promoting The Collaboration Between The Public And The Local Private Sector On The Digitalisation Of Public Services In Benin. It Contributes To Unlock The Creative And Innovative Potential Of The Private Sector For The Digitalisation Of Public Services By Implementing A Series Of Activities. Among Those Activities Are The Development Of A Methodological And Technical Framework (toolkit) And The Preparation Of A Project Pipeline For The Digitalisation Of Services Or The Establishment Of A Co-creation Space That Will Enable Stakeholders To Successfully Co-create New Ideas And Services. These And Other Activities Are Complemented By A Series Of Tailor-made Training Offers For Both, The Public And The Private Sector.