Battery Tenders

Details: Description Lot A 23 Box Clearbook, A4 Size (piece)refillable, Material: Plastic, Cover: Opaque Plastic, Dimension: 310mm X 235mm (min.), Thickness: 0.5mm (min.), Pocket: Transparent Plastic, Number Of Pockets: Twenty (20), Thickness: 0.04 Mm (min.), Color: Assorted ( Black, Blue, Red, Yellow) 23 Box Clearbook, Legal Size (piece) Refillable, Material: Plastic, Cover: Opaque Plastic, Dimension: 345mm X 235mm (min.), Thickness: 0.04mm (min.), Color: Assorted ( Black, Blue, Red, Yellow) 30 Piece Eraser, Plastic/rubber (piece) Rectangular, Dimension (l X W X T) (min.): Equivalent Volume Of 8,350mm3 422 Piece Sign Pen, Extra Fine Tip, Black (piece) Ink Color: Black, Type: Liquid Or Gel, Tip: 0.5mm, Needle Type, One (1) Piece Barrel (non-refillable), Writing Length: One (1) Km (min) 172 Piece Sign Pen, Fine Tip, Black 182 Piece Sign Pen, Medium Tip, Black (piece) , Black (piece) Ink Color: Black, Type: Liquid Or Gel, Tip: 0.7mm, Needle Type, One (1) Piece Barrel (non-refillable), Writing Length: One (1) Km (min) 43 piece Sign Pen, Medium Tip, Blue(piece) , Blue(piece) Ink Color: Blue, Type: Liquid Or Gel, Tip: 0.7mm, Needle Type, One (1) Piece Barrel (non-refillable), Writing Length: One (1) Km (min) 1 pack "wrapping Paper, Kraft, Weight: 65gsm (-5%), Size: Width: 914.4mm (36"") (-3mm), Length: 1,219.4mm (48"") (-3mm)" 25 pack  Battery, Dry Cell, Size Aa (pack) 1.5 Volts, Alkaline, Minimum Of Thirty (30) Minutes Runtime With A Current Draw Of 1.0 Amp Until Cut-off At One (1) Volt 19 pack  Battery, Dry Cell, Size Aaa (pack)1.5 Volts, Alkaline, Minimum Of Thirty (30 Min.) Runtime With A Current Draw Of 0.5 Amp Until Cut-off At One (1) Volt, Shelf Life: Five (5) Years (min) From Date Of Acceptance 19 Bottle Ink, For Stamp Pad (bottle) Volume (min): 50ml, With Applicator, Shall Conform With The Required Perfamnce Test: Dry Time, Stability Test, Resistance To Water, Effect On Rubber Stamp, Corrosion Of Stamp-pad Container 2 Unit Digital Voice Recorder, Built-in Memory: 4gb (expandable), Channel: Stereo, Recording & Playback Format: Mp3, Wma, Earphone Jack, Built-in Microphone, Usb Connectivity, Battery Life 20 Hours (min) (recording Mode, Mp3 128kbps 2 Unit Fire Extinguisher, Dry Chemical, Capacity In Terms Of Mass Of Extinguisher Medium: 4.5kg (10lbs), Purity Of The Chemical: 75% (min.), Duration Of Discharge: 10 Seconds (min.) 5 Piece Philippine National Flag (piece) Type: 1, Size: Length: 1,828.8mm (6') (-3mm), Width: 914.4mm (3') (-3mm), Material: 100% Polyester, With Certificate Of Accreditation From National Historical Commission Of The Philippines (nhcp) 4 Unit "external Hard Drive (unit) Capacity: 1tb, Weight: 181 G - 205 G, Storage Media: 2.5""sata Hdd, Rotational Speed: 5400 Rpm, System Requirements: 1. Ms Windows 7, Ms Windows 8, Ms Windows 10, Mac Os 10.7 Or Later, Linux Kernel 2.6.31 Or Later, Antivirus: Pre-installed Antivirus (optional), Accessories: With Usb 3.0 Cable And Product Manual In English" 17 Piece Flash Drive (piece) 64gb Capacity 7 Unit Computer Mouse, Wireless (unit)connection Type: Usb, Tracking Method: Optical, Resolution: 1,000 Dpi (min), High-definition Optical: 2.5x More Responsive Than Standard Optical Mouse, 1000dpi High Technology Delivers Smoother, More Accurate Cursor Control 15 Piece Light-emitting Diode (led) Light Bulb, 7 Watts, Power Consumption: 7 Watts (max), Color Temperature: 6,500 Kelvin, Lumen Output: Not Less Than 530 Lumens, Frequency Rating: 60hz, Color Rendering Index: 80 +/-10%, Input Voltage: 220-240 Volts, Ac, Socket Base: E27, Light Color: Cool Daylight, Power Factor: Not Less Than 0.90, Average Life: Not Less Than 15,000 Hours, Operating Temperature: ≥ 35°c 73 jar Glue, All-purpose (bottle) Gross Weight (min.): 200 Grams, Free Formaldehyde(max.): 0.1%, Adhesive Strength - No Slippage On Pasted Part, Solid Content (min.): 30%, Ph: 4 To 8,container: Plastic Jar, Cap: Plastic Non-stick Easy Open Twist Top, With Tapered Applicator Attached To The Cap 42 box Staple Wire, Heavy Duty (binder Type), 23/13, Type: Chisel Point, Thickness: 0.60mm (-0.05), Width: 13mm (0.20), Leg Length: 13mm (-0.30), Number Of Staples Per Strip:100, Number Of Staples Per Box: 1,000, Binding Capacity: 40-90 Sheets Of 70gsm Multi-purpose Paper 201 box Staple Wire, Standard (box) 5000 Wires Per Box, Dimensions, In Mm: (see Fig. 1), Width (w): 12.70 +0.15mm/-0.20mm, Leg Length (l): 6.00 +0.50mm/-0.20mm, Thickness (d): 0.40 + 0.05mm, Width (e): 0.50 + 0.05mm, Number Of Wires Per Strip: 100 (min) 12 roll Tape, Electrical, Made Of Polyvinyl Chloride (pvc), Width: 18mm (min.), Length: 16 Meters (min.), Assorted Colors 36 roll Tape, Masking, 24mm (roll)width: 24mm (+1mm), Usable Length: 50 Meters, Adhesion Strength: 8.5n/24mm Width (min), Breaking Strength: 65n/24mm Width (min) 68 roll Tape, Masking, 48 Mm (roll) Width: 48mm (+1mm), Usable Length: 50 Meters, Adhesion Strength: 8.5/24mm Width (min), Breaking Strength: 65n/24mm Width (min) 70 roll Tape, Packaging, 48 Mm (roll) Color: Tan, Width: 48mm (+1mm), Usable Length: 50 Meters, Base Material: Biaxially-oriented Polypropylene, Adhesion Strength: 6n/24mm (min), Breaking Strength: 14n/24mm (min) 52 roll Tape, Transparent, 24mm (roll) Width: 24mm (+1mm), Usable Length: 50 Meters, Base Material: Biaxially-oriented Polypropylene, Adhesion Strength: 6n/24mm (min), Breaking Strength: 14n/24mm (min) 69 roll Tape, Transparent, 48 Mm (roll) Width: 48mm (+1mm), Usable Length: 50 Meters, Base Material: Biaxially-oriented Polypropylene, Adhesion Strength: 6n/24mm (min), Breaking Strength: 14n/24mm (min) 11 roll Twine, Plastic (roll) Weight Per Roll (min.): 1000g, Breaking Strength(min.): 25kg 20 piece Ruler, Plastic, 450mm (piece) Transparent/clear, Ruler Scale: Millimeters, Centimeters, Inches, Clear And Sharp Ruler Scales, Width: 38mm (min), Thickness: 1.30mm (min) 14 unit Calculator, Compact (unit) Width: 100mm - 130mm, Lcd Display, Capacity: 12 Digits, Two Way Power Source (solar And Cell) 10 boc Clip, Backfold, 15mm 87 box Clip, Backfold, 19mm (box) All Metal, Clamping Length: 19mm (-1mm), Clamping Depth: 10mm (min.), Thickness Of Metal: 0.20mm (min.), Diameter Of Clip Handles: 1.0mm (min.) 94 box Clip, Backfold, 25mm (box) All Metal, Clamping Length: 25mm (-1mm), Clamping Depth: 13mm (min.), Thickness Of Metal: 0.22mm (min.), Diameter Of Clip Handles: 1.20mm (min.) 36 box Clip, Backfold, 32mm (box) All Metal, Clamping Length: 32mm (-1mm), Clamping Depth: 14mm (-1mm) Thickness Of Metal: 0.30mm (min.), Diameter Of Clip Handles: 1.45mm (min.) 26 box Clip, Backfold, 50mm (box) All Metal, Clamping Length: 50mm (-1mm), Clamping Depth: 25mm (-1mm), Thickness Of Metal: 0.33mm (min.), Diameter Of Clip Handles: 1.85mm (min.) 252 piece Correction Tape (piece) Disposable, Dispensing Mechanism: Gear Type, Dispensing System: Single Line Tape 21 piece Cutter/utility Knife, For General Purpose (piece) Length: 100mm (+2mm), Width: 16mm (+2mm) Thickness: 0.40mm (+0.02mm) 85 piece Data File Box (piece) Outside Dimension: Width: 125mm (min), Height: 230mm (min), Length: 400mm (min), Material: Chipboard: 3mm Thick (min) 53 piece Data Folder (piece) Dimension: Width: 75mm (min), Height: 230mm (min), Length 380mm (min), Material: Chipboard: 2,5mm Thick (min) 11 piece Dater Stamp (piece) With Locking Mechanism, With Self-inking Stamp, With Removable And Refillable Ink Pad, Single Color, Size Of Imprint: 30mm X 45mm (min) 9 box Envelope, Documentary, A4 (box) 14 box Envelope, Documentary, Legal, (box) Size: 254mm X 381mm (-2mm), Basis Weight: 150gsm (-5%), Thickness (min.): 0.22mm 12 box Envelope, Expanding, Kraft (box) Legal Size: 380mm X 250mm (-3mm), Expansion: 50mm (-3mm), Thickness (min.): 0.38mm 4 box Envelope, Expanding, Plastic (box) 10 box Envelope, Mailing (box) 13 piece Eraser, Felt, For Blackboard/whiteboard (piece) Overall Size (l X W X T) (min.): 125mm X 45mm X 19mm 30 box Fastener, Metal (box) Thickness: Base With Prongs And Compressor: 0.30mm (min.), Material: As Per Sample Provided, Able To Hold 25mm Thick Of Multipurpose Paper (70gsm), 70mm Between Prongs 43 piece File Organizer, Expanding, Plastic, Legal (piece) With 12 Inside Pockets With Index Tab, For Legal Size Paper /documents, Dimension (min.): Cover (flap): Width: 220mm Length: 380mm Thickness: 0.60mm, Inside Pocket: Width: 230mm Length: 360mm Thickness: 0.12mm 49 pack "file Tab Divider, A4, For 210mm X 297mm (a4 Size) Documents, Size (min): Leaf: Length: 297mm Width: 210mm Tab: Length: 65mm Width: 12mm, Basis Weight: 153gsm (-5%), Thickness: 0.22mm (min.) " 37 pack Folder, L-type, Legal, Materials: Plastic, Size: 235mm X 346mm (min.) Thickness: (min.): 0.17mm, Transparent For Easy Identification Of Contents, Assorted Colors 3 box "folder, Pressboard (box) • Material: Heavy Duty Paper Board • Size: 369mm X 242mm (-smm) • Thickness: 0.40mm (min.) • Basis Weight: 312gsm (min.) • Color: Cream, Green Or Maroon, Etc. • Accordion-pleat Gusset: Latex Paper/pvc Bookbinder/book Cloth/paper Cloth, Color: Green, Red, Blue, Expansion: 39mm (-3mm)" 1 pack Folder With Tab, A4, Material: Tagboard/carrier/foldcote/cupstock Board, Leaf Dimension: 240mm X 320mm (+1mm), Tab: 13mm (+2mm), Scoring: 20mm From Edge Of Forlder (+2mm), Other Physical Properties: Grammage G/m²:308 (-5%), Thickness, Mm:0.35 (min), Tearing Resistance, Mn, Md + Cd 2940 (min), Stiffness, Mn.m, (taber) Md + Cd: 13 (min) 45 pack Folder With Tab, Legal (pack) Material: Tagboard/carrier/foldcote/cupstock Board, Leaf Dimension: 240mm X 320mm (+1mm), Tab: 13mm (+2mm), Scoring: 20mm From Edge Of Forlder (+2mm), Other Physical Properties: Grammage G/m²:308 (-5%), Thickness, Mm:0.35 (min), Tearing Resistance, Mn, Md + Cd 2940 (min), Stiffness, Mn.m, (taber) Md + Cd: 13 (min) 27 box "index Tab (box) Transparent, Self-adhesive, Assorted Colors, Five (5) Sets Per Box, One (1) Set Composed Of 2-pieces 6"" Tab Strip And Two (2) Complete Alphabets" 40 piece Magazine File Box, Large, Material: Chipboard: 3mm Thick (min.), Leatherette Paper For Outside Cover, Coated Paper For Inside Cover, Outside Dimension: :width: 110mm (min), Height: 265mm (min), Length: 220mm (min) 36 set Marker, Flourescent (set) Barrel: Flat, Tip: Chisel Point, Color: Three (3) Assorted Colors Per Set, Material And Structure: The Barrel And The Cap Shall Be Made Of Plastic And The Cap Shall Fit Snugly Or Firmly To The Barrel And Of Such Structure That Will Easily Cap And Uncap, Quality: Writing Performance: Flourescent Marker Shall Continuously Highlight On Multipurpose Paper For A Distance Of At Least 100 Meters Under Normal Pressure And Shall Not Show Noticeable Change In Ink Intensity. Cap-off Time: 45 Minutes (min) 225 piece Marker, Permanent, Black (piece) Ink Color: Black, Tip: Felt, Bullet Type, Point: Medium, Structure: The Barrel And The Cap Shall Fit Snugly Or Firmly To The Barrel And Os Such Structure That Shall Easily Cand And Uncap 80 piece Marker, Permanent, Blue (piece) Ink Color: Blue, Tip: Felt, Bullet Type, Point: Medium, Structure: The Barrel And The Cap Shall Fit Snugly Or Firmly To The Barrel And Os Such Structure That Shall Easily Cand And Uncap 86 piece Marker, Whiteboard, Black (piece) Ink Color: Black, Blue, Red, Tip: Felt, Bullet Type, Structure: The Barrel And The Cap Shall Fit Snugly Or Firmly To The Barrel And Of Such Structure That Shall Easily Cand And Uncap 19 piece Marker, Whiteboard, Red, Ink Color: Red, Tip: Felt, Bullet Type, Structure: The Barrel And The Cap Shall Fit Snugly Or Firmly To The Barrel And Of Such Structure That Shall Easily Cand And Uncap 76 box Paper Clip, Vinly/plastic Coated, 33mm (box) Wire Diameter: 0.80mm (min), Length Of Clip: 33mm (min), Total Length Of Wire Used: 102mm (min), Assorted Colors 100 Box Paper Clip, Vinly/plastic Coated, Jumbo, 50mm (box) Wire Diameter: 1.0mm (min), Length Of Clip: 50mm (min), Total Length Of Wire Used: 155mm (min), Assorted Colors 19 Box Pencil, Lead/graphite, With Eraser, Hardness: Hb Or 2, Lead/graphite Diameter: 2mm (min), Wood Casing: Softwood, Coated, Free From Defects As Cross Grains, Interlocked Grains, Warpage Knots And The Like; And Shall Permit Easy Sharpening 11 Piece Pencil Sharpener, Table Mountable Type, With Metal Clamp, Single Cutter-head, One Hole Guide, 9-10mm In A Diameter, All Main Parts Shall Be Made Of Metal Particularly The Cutting Mechanism Cutter,pinion Gear,internal Gear,handle 23 Piece Puncher, Paper, Heavy Duty (piece) Punching Capacity: 30 Sheets Of 70gsm Multipurpose Paper, With Two Hole Guide, Diameter Of Hole: 7mm (approx) 19 Box Rubber Band No. 18 (box) 35o Grams (min) (net Weight), Thickness: 1.00mm (min), Lay Flat Length: 70mm (min), Tensile Strength: 9.81mpa (min), Elongation: 250% (min) 31 Piece Stamp Pad, Felt (piece) Thickness Of Felt: 5mm (min.), Thickness Of Metal: 0.20mm (min.), Stamp Bed Size: Width: 60mm (min.), Length: 100mm (min.) 68 Pair Scissors, Symmetrical/asymmetrical (pair) Overall Length: 160mm (min), Length Of The Cutting Blade: 70mm (min), Thickness Of The Cutting Blade: 1.70mm (min), Length Of Metal Handle (measured From The Center Of The Binding Rivet Screw To The Tip Of The Metal Handle): 35mm (min) 37 Piece Stapler, Standard Type (piece) Loading Capacity: 200 Staples (min), One Time Binding Capacity Of 2-20 Sheets Multi-purpose Paper (70gsm)r 6 Unit Stapler, Heavy Duty (binder) (unit) Type: Desktop, High Capacity/volume, Compatible With The Following Staple Sizes: 13mm And 17mm, Material: Body: Metal, Bases Grip: Non-skid Durable Material, Stapling Capacity: 25-135 Sheets Of 70gsm Multi-purpose Paper, Load Capacity: 100 Staples (min), Throat: Depth: 65mm (min) With Adjustable Paper Guide, Dimension: Manufacturer's Standard 9 Piece Tape Dispenser, Table Top (piece) Net Weight (min.): 1.2kg, Body Made Of Rigid Plastic, Smooth Finish: Weighted, Serrated Cutting Blade Thickness: 0.40mm +0.03mm, Holds Rolls Up To 24mm Wide On 75mm Core, Assorted Color 17 Pack Cartolina, Assorted Colors (pack) Bristol Board, Size: 572mm X 724mm (-3mm), Basis Weight: 100gsm (min.), Thickness: 0.12mm (min.), Assorted Colors: Blue, Green, Yellow, Orange, Lavender, Violet, Gold And Pink, Minimum Of Four (4) Colors 158 Pad "notepad, Stick-on, 50mm X 76mm (pad) Size: 50mm X 76mm (2"" X 3"") (min), Basis Weight: 70gsm (min), Sheet Thickness: 0.09mm (min), Assorted Colors" 175 Pad "notepad, Stick-on, 76mm X 100mm (pad) Size: 76mm X 100mm (3"" X 4"") (min), Basis Weight: 70gsm (min), Sheet Thickness: 0.09mm (min), Assorted Colors" 98 Pad "notepad, Stick-on, 76mm X 76mm (pad) Size: 76mm X 76mm (3"" X 3"") (min), Basis Weight: 70gsm (min), Sheet Thickness: 0.09mm (min), Assorted Colors" 153 Piece Steno Notebook (piece) Basis Weight: 55gsm (-5%) Bond, Thickness: 0.075mm (min), Size: 150mm X 225mm, (min), Top Margin: 25mm (min.), Bottom Margin: 5mm, Number Of Spaces: 22 (min), Cover Thickness: 0.40mm (-0.02mm), 40 Leaves, Ruled Both Sides 40 Bond Paper , Legal, 70 Gsm 40 Ream Bond Paper , A4, 70 Gsm 591 Ream Paper, Multicopy A4 (ream) Basis Weight: 80gsm (-3%), Size: A4, 210mm X 297mm (+2mm In Either Direction), Trim Sizes Shall Be Along Machine Direction Or Long Grain 156 Ream Paper, Multicopy Legal (ream) Basis Weight: 80gsm (-3%), Size: Legal, 216mm X 330mm (+2mm In Either Direction), Trim Sizes Shall Be Along Machine Direction Or Long Grain 419 Ream Paper, Multipurpose A4, Basis Weight: 80gsm (min.), Size: Legal, 216mm X 330mm (+2mm In Either Direction), Trim Sizes Shall Be Along Machine Direction Or Long Grain 93 Ream Paper, Multipurpose Legal, Basis Weight: 80gsm (min.), Size: Legal, 216mm X 330mm (+2mm In Either Direction), Trim Sizes Shall Be Along Machine Direction Or Long Grain 15 Box Paper, Parchment, Size: 210mm X 297mm (+2mm In Either Direction), Basis Weight: 80gsm (-5%), Fine Translucent, Suitable For Laser/inkjet Printing 48 Book Record Book, 300 Pages (book) Basis Wieght: 55gsm (-5%), Thickness: 0.07mm (minimum), Size: L X W: 265mm X 165mm (minimum), Cover Material: Laminated Chipboard, Thickness: 1.5mm (minimum) Size: L X W: 278mm X 175mm (minimum), Margins Top: 25mm (-2mm), Bottom: 8mm (+4mm), Left / Right: Manufacturer's Standard 37 Book "record Book, 500 Pages (book) Basis Weight: 55 Gsm (-5%) Thickness 0.07 Mm (minimum) Size L X W: 265mm X 165mm (minimum) Cover Material Laminated Chipboard Thickness 1.5mm (minimum) Size L X W: 278mm X 175mm (minimum) Margins Top 25mm (-2mm) Bottom 8mm (±4mm) Left / Right Manufacturer’s Standard" 35 Cart Ink Cartridge, Epson C13t664100 (t6641), Black 30 Cart Ink Cartridge, Epson C13t664200 (t6642), Cyan 30 Cart Ink Cartridge, Epson C13t664300 (t6643), Magenta 30 Cart Ink Cartridge, Epson C13t664400 (t6644), Yellow 1054 piece Ballpen 36 pack Sticker Paper , A4, Matte, White, 10 Pcs/pack 21 pack Sticker Paper , Legal, Matte, White, 10 Pcs/pack 25 roll Double Sided Tape 31 pack Photo Paper, A4 Size, Glossy, 10 Sheets/pack 15 packs Photo Paper Legal 4 bottle Disinfectant Bleaching Solution, 3.78 Lit 67 piece Certificate Frame, A4, Orientation: Landscape, Pvc Black 195 piece Certificate Holder, A4, Plastic 1 unit Microphone 74 box Plastic Fastener, Size: Regular (50pcs/box) 14 box Plastic Fastener, Size: Long 2 piece Extension Cord 2 pack Push Pin 12 piece Glue Stick (paste) 5 pack Glue Stick (for Glue Gun) 2 unit Ergonomic Chair, (midback Synthetic Leather Finished Office Chair- Padded Steel Armrest With Heavy Duty Base With Nylon Caster Wheels, With Pneumatic Gaslift For Height Adjustment) 1 unit Executive Chair (for Fo Head) 2 unit Glue Gun 2 unit Speakers 113 bottle Ink Cartridge, Epson 003 Yellow 109 bottle Ink Cartridge, Epson 003 Magenta 109 bottle Ink Cartridge, Epson 003 Cyan 131 bottle Ink Cartridge, Epson 003 Black 10 bottle Ink Cartridge, Hp Gt52 Yellow 10 bottle Ink Cartridge, Hp Gt52 Magenta 10 bottle Ink Cartridge, Hp Gt52 Cyan 10 bottle Ink Cartridge, Hp Gt53 Black 18 bottle Ink, Brother, Black, Btd60bk, 108ml 9 bottle Ink, Brother, Cyan, Bt5000c, 48.8ml 9 bottle Ink, Brother, Yellow, Bt5000c, 48.8ml 6 bottle Ink, Brother, Magenta, Bt5000c, 48.8ml 37 bottle Ink Refill, Epson Ink 001, Black, 127ml 29 bottle Ink Refill, Epson Ink 001, Cyan, 65ml 29 bottle Ink Refill, Epson Ink 001, Magenta, 65ml 29 bottle Ink Refill, Epson Ink 001, Yellow, 65ml 5 Box Sign Pen, Uniball-impact Gel, Ruber Grip, Steel Point, Water-based Pigment Gel Ink 1.0% Ball, Approx 0.6% Line, 12 Pcs/box 58 Piece Sign Penm Black, Gel 0.7mm 12 Piece Sign Pen, Ink Refill, 0.5, My Gel 3 Meter Pdx Loomex Wire 2 Cart Tonner (5501i, No. Tk6309) 12 Packs Notarial Seal Box Notarial Seal (gold), No. 23, 25pcs/box 1 Piece Glass Top Corner Table 2 Piece Steel Filing Cabinet Four Drawers, Vertical 15 Packs Specialty Board, A4 21 Pad Sign Here Sticky Note Pad 30 Packs Specialty Paper, A4 Lot B 58 Bottle Alcohol, Ethyl, 500 Ml, 68% - 72% Ethyl Alcohol, Fully Miscible In Water, Flip-top Cap, Scented 49 Gallon Alcohol, Ethyl, 1 Gallon, , Strength: 68% - 72%, Volume: 1 Gallon, Bottle: Hdpe 51 Can Air Freshener (can) Aerosol Type, Net Content: 150g (min), Assorted Scents (at Least Three (3) Scents), Long Lasting Fragrance (scent Trace Lingers For Atleast 5 Min.) 10 Piece Broom (walis Tambo) (piece)weight: 500 Grams (max), Handle: Plastic Coated Aluminum Tube, Diameter Of Handle: 19mm (min), Length Of Handle: 545mm (min), Dry Weight Of The Tiger Grass: 200grams (min), Usable Length Of Tiger Grass: 300mm (min), With Upper Stitch: 20 (min) Lower Stitch: 30 (min) 5 Piece Broom (walis Ting-ting) (piece) Made Of Mature Coconut Midribs, Standard Size (min.): 140mm Grip, Measured 150mm From The Top,usable Length (min.): 760mm, Rib Count (min.): 350 Pieces 55 Bottle Cleaner, Toilet Bowl And Urinal (bottle) Color: Cear Or Blue, Net Content: 900ml - 1000ml In Rigid Plastic Bottle, Not Chlorine Based, Viscosity: 114cp At 25°c Min Using Ostwald Method 15 Bar Detergent Bar (piece) Net Weight: 140 Grams As Packed (-2.5%) 30 Pouch Detergent Powder, All-purpose, 1kg, Net Weight: One (1) Kilogram (-2.5%) 51 Can Disinfectant Spray (can) Aerosol Type, Net Content Per Can: 400 Grams (min), Crisp, Clean Scent 11 Piece Dust Pan (piece) Made Of Rigid Non-breakable Plastic, With Detachable Handle: Diameter (min.): 30mm, Length (min.): 600mm, Base (min.): Thickness: 1.25mm, Front Width: 260mm, Back Width: 200mm, Depth: 225mm 13 Can "furniture Cleaner (can) Aerosol Type • For All Types Of Surfaces Such As Furniture, Cabinets And Countertops, Vinyl And Leather, Etc. • Net Content (min.): 300mi Per Can • Pleasant Smell. • Sufficient Amount Of Propellant To Totally Expel Content. • Shelf Life: Must Have A Shelf Life Of At Least Twenty-four (24) Months From The Date Of Manufacture But Not Less Than Eighteen (18) Months From The Date Of Delivery" 48 Bottle Hand Soap, Liquid, 500ml (bottle) Mild Scented, Bactericidal/germicidal Property, Individual Packed Plastic Bottle, Packaging: Standard Packaging Of The Manufacture 1 Unit Mop Bucket, Heavy Duty, Hard Plastic, Material: Hard Palstic, Approximate Size (min.), Width: 370mm Length: 475mm Height: 245mm, Capacity: 30 Liters 4 Piece Mophandle, Heavy Duty, Screw Type, Screw Type, With Metal Mop Head Clipper, Aluminum Handle: Thickness (min.): 0.70mm, Outside Diameter: 22mm To 25mm Length (min.): 1.5 Meters 10 Piece Mophead, Made Of Rayon, 36 Stands Per Head (min), 3 Ply's Per Stand, 40 Threads Per Ply, Weight:400 Grams (min), Length: 410mm (min), Length Of Band: 170mm (min), Breaking Strength, Kg: 126 (min) 5 Kilo "rags All Cotton (bundle) Diameter: 178mm (7"") (approx.) Minimum Of Thirty-two (32) Pieces To A Kilogram, Assorted Colors" 7 Pack Scouring Pad (pack) Made Of Synthetic Nylon, 150mm X 200m (min.), Thickness (min.): 8mm, Color: Green 56 Pack/roll "trashbag, Xxl Size (roll/pack) Color: Black, Dimension: 940mm X 1016mm (-6mm) (37"" X 40""), Thickness: 0.02mm (min), Tensile Strength At Break: Astm D882, One Way: 15n/mm² (min), Other Way: 12n/mm² (min), Elongation At Break: Astm D882, One Way: 400% (min), Other Way: 600% (min)" 54 Pack/roll Trashbag, Large Size (roll/pack) 29 Pack/roll Trashbag, Xl Size (roll/pack) 19 Piece Wastebasket, Non-rigid Plastic, Made Of Rigid Plastic, Thickness (min.): 1.20mm, Height (min.): 225mm, Full Volume (up To The Lid): 8.5 Liters (min.), Assorted Colors 44 bottle Dishwashing Liquid Lemon/calamansi 25 pcs Dishwashing Paste, 200g 34 Pack Tissue, Interfolded Paper Towel (pack) Basis Weight: 34gsm (+/-2gsm), Sheet Dimension: Width Of Sheet: 200mm (+3mm), Length Of Sheet: 200mm (+3mm), Total Number Of Sheets Per Pack: 150 Pulls, Interfolded, Number Of Ply: One (1) Ply 164 Pack Toilet Tissue Paper, 2 Ply (pack) , 100% Recycled, 12 Rolls Per Pack, Weight: 28gsm (min.), Sheet Dimension: Width Of Sheet: 100mm (+/-3mm), Length Of Sheet: 114mm (-5mm) 18 Bottle Hand Sanitizer (bottle) Form: Liquid Or Gels, Volume: 500ml, Hypoallergenic, Non-drying, Bottle: Pump Dispenser Plastic, Fda Certificate Of Product Registration/notification 20 Can Insecticide (can) Aerosol, Kerosene Based, Quick Kill Contact And Residual Type, Cautionary Scent/odor Required, Multi-insect Killer, Net Content Per Can: 600ml (min.) 41 piece Toilet Deodorant Cake, Assorted, 100grms 6 Pcs Doormat Xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

Details: Description Contract For The Supply Of One (1) Lot Afcs Equipment Consumables Under Pr No. Rs2-2406-181 And Itb No. 2407-143-01r Schedule Of Activities Pre-bid Conference : 25 November 2024 (monday) At 10:00 A.m. Cafeteria, Lrta Line 2- Depot, Santolan, Pasig City Submission Of Bids : 09 December 2024 (monday) At 9:30 A.m. Cafeteria, Lrta Line 2- Depot, Santolan, Pasig City Opening Of Bids : 09 December 2024 (monday) At 10:00 A.m. Cafeteria, Lrta Line 2- Depot, Santolan, Pasig City Complete Details Of The Contract Are In The Bidding Documents, And Can Be Viewed On Philgeps And Lrta Websites. The Light Rail Transit Authority (lrta), Through Its Cob 2024, Intends To Apply The Sum Of Six Million Eight Hundred Thirty-three Thousand Nine Hundred Twenty-nine 00/100 (₱6,833,929.00) Pesos, Inclusive Of All Duties, Taxes, And/or Other Charges, Being The Approved Budget For The Contract (abc) To Payments Under The Afore-mentioned Contract. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. Lrta Now Invites Bids From Prospective/interested Bidders With The Following Details: Description Ticket Vending Machine (tvm) 1. 8 Pcs- Sensor, Receive (like Overflow Sensor) ₱42,688.00 2. 15 Pcs- Roller, Single Drive B ₱100,215.00 3. 15 Pcs- Roller, Passive (big) ₱87,795.00 4. 15 Pcs- Roller, Reverse Drive ₱115,740.00 5. 15 Pcs- Roller, Dual Drive B ₱87,795.00 6. 30 Pcs- U-shaped Bracket, Press Spring ₱150,750.00 7. 30 Pcs- Spring, Shaft 0.5 ₱150,750.00 8. 30 Pcs- Spring, Shaft 0.6 ₱150,750.00 9. 30 Pcs- Holder, Shaft Press ₱144,540.00 10. 2 Pcs- Stepper Motor (for Sjt Issuing Module) ₱28,266.00 11. 6 Pcs- Electromagnet, Solenoid M001 (coin/diverter Solenoid) ₱53,748.00 12. 2 Pcs- Buzzer ₱13,776.00 13. 15 Pcs- Door Switch, Short (chs,svt, Hopper Switch) ₱69,165.00 14. 3 Pcs- Dc Motor (sjt Magazine Motor) ₱42,399.00 15. 6 Pcs- Sensor, Transmit (coin Vault Sensor Tx) ₱27,666.00 16. 6 Pcs- Sensor, Receive (coin Vault Sensor Rx) ₱27,666.00 17. 10 Pcs- Sensor, Transmit (like Overflow Sensor) ₱53,350.00 18. 2 Pcs- Cover Plastic, Ticket Issuing Module ₱13,776.00 19. 8 Pcs- Roller, Feeder Drive ₱55,104.00 20. 30 Pcs- Roller, Passive (press Roller Equivalent To Old) ₱169,380.00 21. 30 Pcs- Holder, Spring 0.5 ₱160,050.00 22. 30 Pcs- Holder, Spring 0.6 ₱160,050.00 23. 10 Pcs- Timing Belt (172xl) ₱63,700.00 24. 15 Pcs- Timing Belt (45mxl) ₱80,025.00 25. 10 Pcs- Timing Belt (53mxl) ₱53,350.00 26. 10 Pcs- Timing Belt (94mxl) ₱56,460.00 27. 10 Pcs- Timing Belt (347.2mxl)( Sjt Issuing Belt) ₱74,050.00 28. 4 Pcs- Slide, 12" (railing) ₱25,480.00 29. 4 Pcs- Lock (lcd Lock) ₱29,620.00 30. 2 Pcs- Note Box ₱322,206.00 31. 2 Pcs- Ligthing, Led-12v ₱11,706.00 32. 2 Pcs- Lighting, Led-24v (for Tvm Return Cup) ₱10,050.00 33. 2 Pcs- Lighting, Round 24v (tvm Maintenance Light) ₱32,406.00 34. 10 Pcs- Chs Flexible Hose ₱51,630.00 35. 2 Pcs- Coin Hopper ₱64,566.00 36. 10 Pcs- Bna6 Overhauling Kit Or Its Equivalent ₱629,200.00 Note: Equivalent Offers For Item Nos. 1-36 Must Fit And Be Compatible With The Existing Line 2 East Ticket Vending Machine (tvm) Equipment Msi/elis Infotech Systems Co..ltd Model: V-c2125 (please Refer To Attached Files For Item Specifications/ Usage And Pictures) Automatic Gates (ag) 37. 15 Pcs- Door Switch, Long ₱72,270.00 38. 2 Pcs- Speaker ₱12,740.00 39. 10 Pcs- Electromagnet (ag-diverter Solenoid) ₱89,580.00 40. 10 Pcs- Electromagnet (ag-insert Bezel Solenoid) ₱105,100.00 41. 10 Pcs- Geared Motor, Transport (ag-transport Motor) ₱141,330.00 42. 5 Pcs- Geared Motor (ag-elevator Motor For Old) ₱44,790.00 43. 15- Sensor (like Weigth Det Sensor) ₱87,795.00 44. 150- Roller, Main Drive ₱722,700.00 45. 150- Roller, Press Or Its Equivalent ₱645,000.00 46. 6 - Timing Belt (490xl) (tcm Belt) ₱50,640.00 47. 5 - Gas Spring ₱42,200.00 48. 5 - Gas Spring (dt) ₱44,790.00 49. 2 - Latch, Lock ₱18,950.00 50. 6 - Reader Bracket For Secondary Antenna ₱53,748.00 Note: Equivalent Offers For Item Nos. 37-50 Must Fit And Be Compatible With The Existing Line 2 East Automatic Gates (ag) Msi/elis Infotech Systems Co..ltd Model: G-x0c1 (please Refer To Attached Files For Item Specifications/ Usage And Pictures) Pos / Sc And Common Parts 51. 30 - Sensor (transmit) White ₱141,420.00 52. 30 - Sensor (receive) Black ₱141,420.00 53. 15 - Sensor, U-shaped (m) (prep Sensor) ₱70,710.00 54. 30 - Sensor, U-shaped (h) (diverter/coin Shutter Sensor) ₱141,420.00 55. 15 - Sensor, Retro-reflective (like Stacker Sensor Small) ₱134,370.00 56. 2 - Emc Filter ₱26,196.00 57. 6 - Magazine (ag/tvm) ₱78,588.00 58. 6 - Cru Casing With Db9 Port Or Its Equivalent ₱31,422.00 59. 4 - Keyboard/mouse Or Its Equivalent ₱17,892.00 60. 10 - Fujitsu Cutter Assembly ₱56,230.00 61. 10 - Pos Sam Or Its Equivalent ₱46,800.00 62. 10 - Ag-sam Or Its Equivalent ₱46,800.00 63. 10 - Sjt Sam Or Its Equivalent ₱46,800.00 64. 10 - Svc Sam Or Its Equivalent ₱46,800.00 65. 2 - Coin Box ₱85,190.00 66. 4 - Mini Hdmi Antenna Cable ₱25,480.00 67. 30 - Ups Battery 12v ₱154,890.00 Note: Equivalent Offers For Item Nos. 51-67 Must Fit And Be Compatible With The Existing Line 2 East Point Of Sale (pos) & Server Computer (sc) (please Refer To Attached Files For Item Specifications/ Usage And Pictures) Approved Budget For The Contract (abc) Grand Total: ₱ 6,833,929.00 Bid Security Cash/cc-mcbank Draft/ Guarantee Or Ilc (2%) ₱ 136,678.58 Surety Bond (5%) ₱ 341,696.45 Cost Of Bid Documents ₱ 10,000.00 Note: Prospective Bidders Have The Option To Post A Bid Securing Declaration Which Commits To Pay The Corresponding Amount As Fine And Be Suspended For A Period Of Time From Being Qualified To Participate In Any Government Procurement Activity In The Event It Violates Any Of The Conditions Stated Therein As Required In The Guidelines Issued By The Gppb. The Contract Period Is Eight (8) Months Upon Receipt Of Contract / Purchase Order (p.o.). Bidders Should Have Completed, Within Fifteen (15) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). Bidding Will Be Conducted Through Open Competitive Bidding Procedure Using A Non-discretionary” Pass/fail” Criterion As Specified In The 2016 Implementing Rules And Regulations (r-irr) Of Republic Act No. 9184. Bidding Is Restricted To Filipino Citizens / Sole Proprietorships, Partnerships, Corporations, Cooperatives Or Joint Ventures With At Least Sixty (60%) Percent Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. Prospective Bidders May Obtain Further Information From Lrta And Inspect The Bidding Documents At The Bac Secretariat Office, Lrta Line 2 Depot, Marcos Highway, Santolan, Pasig City During Office Hours From 8:00 A.m. To 5:00 P.m. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On 15 November 2024 (friday) Until Not Later Than The Deadline For The Submission And Receipt Of Bids From The Address Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Indicated Above. The Lrta Shall Allow The Bidder To Present Its Proof Of Payment For The Fees Through Personal Appearance, Facsimile, Or Through E-mail. The Lrta Will Hold A Pre-bid Conference On The Date And Address As Described Above, Which Shall Be Open To Prospective Bidders. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Address Indicated Above On Or Before 09 December 2024 (monday) At 9:30 A.m. Late Bids Shall Not Be Accepted. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In The Instruction To Bidders And The Bid Data Sheet. Bid Opening Shall Be 09 December 2024 (monday) At 10:00 A.m.at The Address Indicated Above. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. The Lrta Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. For Further Information, Please Refer To: Atty. Aylwinston C. Pillos Head, Bac Secretariat Bac Secretariat Office Lrta Line 2 Depot, Marcos Highway, Santolan, Pasig City Tel. Nos. 647-3484 To 85 Loc. 29872 Email Address: Bacsec@lrta.gov.ph Facsimile No. 647-3484 To 85 Loc. 29906/29 You May Visit The Following Websites: Https://www.lrta.gov.ph/ Https://philgeps.gov.ph/

Details: Description Republic Of The Philippines Department Of Public Works And Highways Regional Office Ii Dalan Na Pavvurulun, Rgc, Carig Sur, Tuguegarao City, Cagayan Invitation To Bid For 24b00127 : Construction Of Two - Storey Building For Procurement Service: Department Of Budget And Management (ps-dbm) Regional Depot - Tuguegarao 1. The Dpwh Regional Office Ii, Through The 2024 Ps-dbm Revolving Fund Intends To Apply The Sum Of ₱64,525,000.00 Being The Approved Budget For The Contract (abc) To Payments Under The Contract 24b00127: Construction Of Two - Storey Building For Procurement Service: Department Of Budget And Management (ps-dbm) Regional Depot - Tuguegarao. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 1. The Dpwh Regional Office Ii Through Its Bids And Awards Committee Now Invites Bids For The Hereunder Works: Name Of Contract : Construction Of Two - Storey Building For Procurement Service: Department Of Budget And Management (ps-dbm) Regional Depot - Tuguegarao Contract Id No. : 24b00127 Location : Regional Government Center, Carig Sur, Tuguegarao City, Cagayan Brief Project Description : Ps-dbm Building, Generator Set With Generator Set House And Concrete Pavement, Building = 23.0 X 33.8 Meters Scope Of Works : Facilities For The Engineer • Provision (rental Basis), Operation And Maintenance Of Combined Field Office, Laboratory And Living Quarters Building For The Engineer • Provision Of Furniture /fixtures Equipment & Appliances For The Field Office Of The Engineer Other General Requirements • Permits And Clearances • Project Billboard/signboard (dpwh, Coa, Denr) • Occupational Safety And Health Program • Traffic Management • Mobilization/demobilization • Additional Geotechnical Investigation Earthworks • Trees (furnishing And Transplanting) • Clearing And Grubbing • Removal Of Trees • Structure Excavation • Embankment (from Structure Excavation And Borrow) • Gravel Fill Subbase And Base Preparation • Aggregate Subbase Course Surface Courses • Pccp, 0.15m Thick, 14-day Concrete Plain And Reinforced Concrete Works • Structural Concrete, (3000 & 4000) Psi, Class A, 28 Days • Lean Concrete • Reinforcing Steel Grade (40 & 60) • Formworks And Falseworks Finishing And Other Civil Works • Soil Poisoning • Ceiling, Metal Frame, Gypsum Board • Aluminum Metal Cladding • Modular Partition • Louver Window • Flush Door • Aluminum Framed Glass Doors (swing Type) • Aluminum Glass Windows, (casement, Awning, Fixed) Type • Frames (jambs, Sills, Head, Transoms And Mullions) • Doors, (flush, Wood Panel) • Roll-up Doors • Waterproofing, Liquid • Built-up And Preformed Membrane • Canopy Drain With Strainer • Unglazed Tiles • Cement (floor, Plaster) Finish • Stucco Finish • Painting Works, (masonry/concrete, Steel) • Pvc Doors And Frames • Chb Non-load Bearing (including Reinforcing Steel), (100 & 150) Mm • Louver Block • Metal Structure Accessories • Metal Railing (steel) • Sanitary/plumbing Fixtures • Cold Water Lines • Sewer Line Works • Storm Drainage And Downspout Electrical Works • Rigid Steel Conduit • Rigid Polyvinyl Chloride Pipes (pvc/upvc) • Boxes/wire Gutter • Fittings And Accessories • Electric Wire • Single Pole Wall Switch On One Switch Plate • Duplex (2 Single Pole Wall Switches On One Switch Plate) • Triplex (3 Single Pole Wall Switches On One Switch Plate) • Three-way Switch • Single Convenience Outlet/receptacle, Grounding Type (gt) • Duplex Convenience Outlets/receptacles (gt) • Pop-up Type/floor Duplex Convenience Outlet/receptacle (gt) • Wires And Wiring Devices • Panelboard With Main & Branch Breakers • Pad Mounted Distribution Transformer (oisc) With Complete Accessories • Generator (single Or Three Phase - Standby) • Lighting Fixtures Electronic Works • Network Cabling • Cctv System • Network Video Recorder • Lcd, Led Monitor • Door Access And Card Reader System • Public Address System • System Management Amplifier • Remote Microphone • Ceiling Speaker • Wall Mount Speaker • Wires/cables • Fire Alarm System • Smoke Detector With Base • Heat Detector With Base • Fire Alarm Control Panel • Manual Pull Station Switch • Back-up Battery Pack Mechanical Works • Ventilating Equipment • Exhaust Fan (ceiling Cassette, Wall Mounted, Wall Mounted, Industrial Type) • Booster Pump With Control • Water Tank (stainless) • Fire Department Connections For Wet And Dry Type System • Air Conditioning System (vrf/vrv) • Service Elevator Approved Budget For The Contract (abc) : ₱64,525,000.00 Contract Duration : 243 Calendar Days Inclusive Of 16 Unworkable/rainy Days, 47 Sundays And Holidays 2. The Major Category Of Work For The Project Is Bicwoplc - Buildings: Construction-without Piles-low Rise-concrete Frame(1 To 5 Storey ). 3. Prospective Bidders Should Be Registered With And Classified By The Philippine Contractors Accreditation Board (pcab) With Pcab License Size Range Of At Least Medium A. Contractors/applicants Who Wish To Participate In This Bidding Are Encouraged To Enroll In The Dpwh Civil Works Application (cwa) At The Dpwh Procurement Service (prs), 5th Floor, Dpwh Bldg., Bonifacio Drive, Port Area, Manila, While Those Already Enrolled Shall Keep Their Records Current And Updated. The Contractor’s Eligibility To Bid On The Project Will Be Determined Using The Dpwh Contractor Profile Eligibility Process (cpep) And Subject To Further Post-qualification. Information On Registration Can Be Obtained From The Prs During Working Weekdays From 7:00 Am To 4:00 Pm Or At The Dpwh Website Www.dpwh.gov.ph. 4. Pursuant To Gppb Resolution No. 15- 2021 Dated October 14, 2021, Prospective Bidders Shall Submit In Their First Envelope The Updated Philgeps Certificate Of Platinum Registration And Membership In Accordance With Sections 23.3, 24.4.3 And 54 Of Republic Act 9184 (ra9184), All Class “a” Eligibility Documents Covered By Section 8.5.2 Of The 2016 Revised Irr Of Ra 9184 Supporting The Veracity, Authenticity And Validity Of The Certificate Shall Remain Current And Updated, And That Failure By The Prospective Bidder To Update Its Philgeps Certificate Of Platinum Registration And Membership With The Current And Updated Class “a” Eligibility Documents Covered By Section 8.5.2 Of The 2016 Revised Irr Of Ra 9184 Shall Result In The Automatic Suspension Of The Validity Of Its Certificate Of Platinum Registration And Membership Until Such Time That All Of The Expired Class “a” Eligibility Documents Has Been Updated. 5. Bidders Are Required To Update Their Existing Philgeps Registration (platinum) In The Dpwh Civil Works Registry Prior To The Scheduled Receipt And Opening Of Bids. 6. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184), Otherwise Known As The "“government Procurement Reform Act”. The Contract Shall Be Awarded To The Lowest Calculated Responsive Bidder (lcrb) Who Was Determined As Such During Post-qualification. 7. Interested Bidders May Obtain Further Information From The Dpwh Regional Office Ii And Inspect The Bidding Documents At Procurement Staff, 4th Floor, Dpwh Regional Office No. Ii Extension Bldg. 2, Regional Government Center, Carig Sur, Tuguegarao City, Cagayan During Weekdays From 8:00 A.m. To 5:00 P.m.. 8. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 6 - 26, 2024, From The Address Given Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Fifty Thousand Pesos Only (₱50,000.00). Pursuant To Section 17. 5 Of The 2016 Revised Irr Of Ra 9184, Bidding Documents Fee May Be Refunded In Accordance With The Aforementioned Guidelines Based On The Grounds Provided For Under Section 41 Of Ra 9184 And Its Irr. 9. The Bidding Documents May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps), And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 10. The Dpwh Regional Office Ii Will Hold A Pre-bid Conference On November 13, 2024, 1:00 Pm At The Procurement Conference Room, 4th Floor, Dpwh Regional Office Ii Extension Bldg. 2, Regional Government Center, Carig Sur, Tuguegarao City, Cagayan, And/or Through Webcasting Via Youtube Channel (dpwh Regional Office Ii Procurement Livestream) Which Shall Be Open To Prospective Bidders. Prospective Bidders Are Encouraged To Send Their Technical Personnel To Attend The Pre-bid Conference. 11. Bid Submission May Be Done Manually Or Electronically. However, Bidders Should Only Select One Mode Of Submission, Either Manual Or Electronic. Similar To Manual Submission, The Guidelines For The Preparation And Submission Of An Electronic Bid Are Contained In The Bds Clause 17. 12. Bids Must Be Duly Received By The Bac Secretariat For Manual Submission At The Procurement Conference Room, 4th Floor, Dpwh Regional Office Ii Extension Bldg. 2, Regional Government Center, Carig Sur, Tuguegarao City, Cagayan Or At Electronicbids_r2@dpwh.gov.ph For Electronic Submission And Receipt Of Bids On Or Before November 26, 2024 At 10:00 Am. Late Bids Shall Not Be Accepted. 13. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Bds Clause 15.1. 14. Bid Opening Shall Be On November 26, 2024, Immediately After The Deadline For The Submission Of Bid At The Procurement Conference Room, 4th Floor, Dpwh Regional Office Ii Extension Bldg. 2, Regional Government Center, Carig Sur, Tuguegarao City, Cagayan. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. 15. The Dpwh Regional Office Ii Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra 9184, Updated As Of July 19, 2024, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 16. You May Visit The Following Websites; For Downloading Bidding Documents: Dpwh Website: Www.dpwh.gov.ph Philgeps Website: Www.philgeps.gov.ph Livestreaming Website: Https://www.youtube.com/@dpwh.ro.2 For Online Bid Submission: Electronicbids_r2@dpwh.gov.ph 17. For Further Information, Please Refer To: Hilario Y. Casem Engineer Iv Head, Procurement Staff Dpwh Regional Office Ii Carig Sur, Tuguegarao City, Cagayan Contact No.: 0935-176-0624 Email Address: Casem.hilario@dpwh.gov.ph Bernard T. Calabazaron Chief, Qah Division Bac Chairperson Dpwh Regional Office Ii Carig Sur, Tuguegarao City, Cagayan Calabazaron.bernard@dpwh.gov.ph Date Of Posting: Dpwh And Philgeps Websites: November 6 -12, 2024 Conspicuous Place (procurement Bulletin Board): November 6 -12, 2024

Details: The Purpose Of This Notice Is To Post Questions From Industry And Provide Answers For The Sources Sought Notice: Request For White Papers Baa Topic Ii A.2.: Assessing And Developing Technological Fluency For The Future Force “creative Performance Behaviors With Technology” ________________________________________________________________________________________________________ sources Sought Notice: Request For White Papers Baa Topic Ii A.2.: Assessing And Developing Technological Fluency For The Future Force “creative Performance Behaviors With Technology” Per Special Notice, White Paper Submissions Are Due No Later Than 26 September 2024; 5:00 Pm Eastern Daylight Time. _________________________________________________________________________________________________ the Purpose Of This Amendment 02 Is To Provide Updated Weblinks, Updated Policy For Property Management Plan (contracts Only) And Other Updates. ____________________________________________________________________________________________________ sources Sought Notice: Request For White Papers Baa Topic Ii A.2-8.a.2: Enhancing Job Classification And Assignment "review Of Army Aptitude Area Composites Of The Armed Services Vocational Aptitude Battery (asvab)" Per Special Notice, White Paper Submissions Are Due No Later Than 19 July 2024; 5:00 Pm Eastern Daylight Time. _____________________________________________________________________________________________________ sources Sought Notice: Request For White Papers Baa Topic 1. Basic Research Areas Of Interest “theories Of Self-regulated Learning” Per Special Notice, White Paper Submissions Are Due No Later Than 05 January 2024; 5:00 Pm Eastern Daylight Time ______________________________________________________________________________________________ the Purpose Of This Notice Is To Post Questions From Industry And Provide Answers For The Broad Agency Announcementbaa Topic Ii A.2-.a.ii: Holistic Personnel Assessment "influences On Enlisted Soldier Career Progression" _______________________________________________________________________________________________ sources Sought Notice: Request For White Papers Baa Topic Ii A.2.b.ii:multifaceted Development Pathways For Organizational And Strategic Leaders “self-development Decision-making In Army Officers” Per Special Notice, White Paper Submissions Are Due No Later Than 8 December 2023; 5:00 Pm Eastern Daylight Time. __________________________________________________________________________________________________ sources Sought Notice: Request For White Papers Baa Topic Ii A.2-.a.ii: Holistic Personnel Assessment "influences On Enlisted Soldier Career Progression" Per Special Notice, White Paper Submissions Are Due No Later Than 04 November 2023; 5:00 Pm Eastern Daylight Time. ____________________________________________________________________________________________________ sources Sought Notice: Request For White Papers Baa Topic Ii A.2.a.i: Improving Talent Management Through Data Science “understanding Organizational And Profession Identity Influence On Career Pathing And Retention” Per Special Notice, White Paper Submissions Are Due No Later Than 7 October 2023; 5:00 Pm Eastern Daylight Time. _____________________________________________________________________________________________________ sources Sought Notice: Request For White Papers Baa Topic Ii A.2.a.i: Improving Talent Management Through Data Science “army Resume Profiling And Matching System” Per Special Notice, White Paper Submissions Are Due No Later Than 4 October 2023; 5:00 Pm Eastern Daylight Time. _________________________________________________________________________________________________ the Purpose Of This Notice Is To Post Questions From Industry And Provide Answers For The Broad Agency Announcement Baa Topic Ii A.2.b.i: Complex Cognitive Competencies For Organizational And Strategic Leaders “developmental Experiences Assessment For Officer Strategic Thinking Development” __________________________________________________________________________________________________ sources Sought Notice: Request For White Papers Baa Topic Ii A.2-.a.ii: Holistic Personnel Assessment“influences On Officer Career Progression” white Papers Due Nlt 13 September 2023; 5:00 Pm Eastern Daylight Time. _________________________________________________________________________________________________ sources Sought Notice: Request For White Papers Baa Topic Ii A.2-.a.ii: Holistic Personnel Assessment "influences On Enlisted Soldier Career Progression" white Papers Due Nlt 13 September 2023; 5:00 Pm Eastern Daylight Time. __________________________________________________________________________________________________ the Purpose Of This Notice Is To Post Addtional Questions From Industry And Provide Answers For The Broad Agency Announcement (baa) W911nf-23-s-0010 Baa Topic Ii A.2-.a.ii: Holistic Personnel Assessment “developing Nco Promotion Situational Judgment Test” ___________________________________________________________________________________________________ request For White Papers Baa Topic Ii A.2.b.ii: Multifaceted Development Pathways For Organizational And Strategic Leaders “self-development Decision-making In Army Officers”. white Papers Due Nlt 1 September 2023; 5:00 Pm Eastern Daylight Time. ____________________________________________________________________________________________________ request For White Papers Baa Topic Ii A.2.b.ii: Multifaceted Development Pathways For Organizational And Strategic Leaders “enhancing Metacognition Across The Leader Development Lifecycle” . white Papers Due Nlt 31 August 2023; 5:00 Pm Eastern Daylight Time. _____________________________________________________________________________________________________ request For White Papers Baa Topic Ii A.2.b.i:complex Cognitive Competencies For Organizational And Strategic Leaders “accelerating Innovative Thinking Proficiency In Army Officers” . white Papers Due Nlt 31 August 2023; 5:00 Pm Eastern Daylight Time. ____________________________________________________________________________________________________ w911nf-23-s-0010_amendment 01 Is Issued To Correct Administrative Inconsistencies. ___________________________________________________________________________________________________ request For White Papers Baa Topic Ii A.2.b.i: Complex Cognitive Competencies For Organizational And Strategic Leaders, "envisioning Futures With Probability And Risk". white Papers Due Nlt 28 August 2023; 5:00 Pm Eastern Daylight Time. _____________________________________________________________________________________________________ request For White Papers Baa Topic Ii A.2.b.i: Complex Cognitive Competencies For Organizational And Strategic Leaders, "developmental Experiences Assessment For Officer Strategic Thinking Development." white Papers Due Nlt 28 August 2023; 5:00 Pm Eastern Daylight Time. _____________________________________________________________________________________________________ request For White Papers Baa Topic Ii A.2d: Assessing And Developing Technological Fluency For The Future Force “small Unmanned Aircraft Systems Ksbs: Leader Training And Utilization” white Papers Due Nlt 30 August 2023; 5:00 Pm Eastern Daylight Time. _____________________________________________________________________________________________________ the Purpose Of This Notice Is To Post Questions From Industry And Provide Answers For The Broad Agency Announcement (baa) W911nf-23-s-0010 Baa Topic Ii A.2-.a.ii: Holistic Personnel Assessment “developing Nco Promotion Situational Judgment Test” __________________________________________________________________________________________________ request For White Papers Baa Topic Ii A.2-.a.ii: Holistic Personnel Assessment “developing Nco Promotion Situational Judgment Test” white Papers Due Nlt 2 August 2023; 5:00 Pm Eastern Daylight Time. __________________________________________________________________________________________________ request For White Papers Baa Topic Ii A.2-.b.4: Assessing And Developing Junior Leader Competencies For Multidomain Operations “tactical Decision-making Exercises To Assess And Develop Leader Critical Thinking Competencies” white Papers Due Nlt 17 August 2023; 5:00 Pm Eastern Daylight Time. ___________________________________________________________________________________________________ the Purpose Of This Notice Is To Post Additional Questions From Industry And Provide Answers For The Broad Agency Announcement (baa) W911nf-23-s-0010 Baa Topic Ii A.2.a.ii: Holistic Personnel Assessment “refinement Of The Common Cyber Capabilities Assessment” __________________________________________________________________________________________________ the Purpose Of This Notice Is To Post Questions From Industry And Provide Answers For The Broad Agency Announcement (baa) W911nf-23-s-0010 Baa Topic Ii A.2.a.ii: Holistic Personnel Assessment “refinement Of The Common Cyber Capabilities Assessment” ____________________________________________________________________________________________________ request For White Papers Baa Topic Ii A.2.b.v: Developing Noncommissioned Officers For The Future Force “enhancing Interpersonal Competencies Of Junior Noncommissioned Officers” white Papers Due Nlt 16 July 2023; 5:00 Pm Eastern Daylight Time. __________________________________________________________________________________________________ request For White Papers: Baa Topic Ii A.2-.c.ii: Team Staffing And Composition “computational Modeling For Team-based Assignment” **white Papers Due Nlt 30 June 2023, 5:00 Pm Eastern Daylight Time. __________________________________________________________________________________________________ request For White Papers: Baa Topic Ii A.2-c.3: Developing Teams For The Future Operational Environment “identifying, Operationalizing, And Developing Transportable Multiteam System Competencies For The Future Operational Environment” **white Papers Due Nlt 15 July 2023, 5:00 Pm Eastern Daylight Time. ______________________________________________________________________________________________ request For White Papers: Baa Topic Ii A.2- C.iii: Developing Teams For The Future Operational Environment “mitigating The Impacts Of Personnel Turnover For Teams In The Foe” **white Papers Due Nlt 30 June 2023, 5:00 Pm Eastern Daylight Time. ____________________________________________________________________________________________________ request For White Papers: Baa Topic Ii A.2.a.ii: Holistic Personnel Assessment “refinement Of The Common Cyber Capabilities Assessment” **white Papers Due Nlt 15 June 2023, 5:00 Pm Eastern Daylight Time. ___________________________________________________________________________________________________ this Broad Agency Announcement (baa), Which Sets Forth Research Areas Of Interest To The United States Army Research Institute For The Behavioral And Social Sciences (ari), Is Issued Under The Provisions Of Paragraph 6.102(d)(2) And 35.016 Of The Federal Acquisition Regulation (far), Which Provides For The Acquisition Of Basic And Applied Research And That Part Of Development Not Related To The Development Of A Specific System Or Hardware Procurement Through The Competitive Selection Of Proposals, And 10 U.s.c. 4001, 10 U.s.c. 4021, And 10 U.s.c. 4022, Which Provide The Authorities For Issuing Awards Under This Announcement For Basic And Applied Research. Proposals Submitted In Response To This Baa And Selected For Award Are Considered To Be The Result Of Full And Open Competition And In Full Compliance With The Provisions Of Public Law 98-369, "the Competition In Contracting Act Of 1984" And Subsequent Amendments. ari Is The Army’s Lead Agency For The Conduct Of Research, Development, And Analyses For Army Readiness And Performance Via Research Advances And Applications Of The Behavioral And Social Sciences That Address Personnel, Organization, And Soldier And Leader Development Issues. Programs Funded Under This Baa Include Basic Research, Applied Research, And Advanced Technology Development That Can Improve Human Performance And Army Readiness. funding Of Research And Development (r&d) Within Ari Areas Of Interest Will Be Determined By Funding Constraints And Priorities Set During Each Budget Cycle. Those Contemplating Submission Of A Proposal Are Encouraged To Contact The Ari Technical Point Of Contact (tpoc) Identified In Section G Of This Baa Or The Responsible Ari Manager Noted At The End Of The Technical Area Entry (part Ii Section A Of This Baa) To Determine Whether The Proposed R&d Warrants Further Inquiry. If The Proposed R&d Warrants Further Inquiry And Funding Is Available, Submission Of A White Paper Or Proposal Will Be Entertained. The Recommended Three-step Sequence Is (1) Initial Contact With The Ari Tpoc Or Responsible Ari Manager, (2) White Paper Submission, (3) Proposal Submission. this Sequence Allows Earliest Determination Of The Potential For Funding And Minimizes The Labor And Cost Associated With Submission Of Proposals That Have Minimal Probability Of Being Selected For Funding. Costs Associated With White Paper Or Proposal Submissions In Response To This Baa Are Not Considered Allowable Direct Charges To Any Resulting Award. These Costs May Be Allowable Expenses To Normal Bid And Proposal Indirect Costs Specified In Far 31.205-18. applicants Submitting Proposals Are Cautioned That Only A Government Contracting Or Grants Officer May Obligate The Government To Any Agreement Involving Expenditure Of Government Funds. to Be Eligible For An Award Under This Announcement, A Prospective Awardee Must Meet Certain Minimum Standards Pertaining To Financial Resources And Responsibility, Ability To Comply With The Performance Schedule, Past Performance, Integrity, Experience, Technical Capabilities, Operational Controls, And Facilities. In Accordance With Federal Statutes, Regulations, And Department Of Defense (dod) And Army Policies, No Person On Grounds Of Race, Color, Age, Sex, National Origin, Or Disability Shall Be Excluded From Participation In, Be Denied The Benefits Of, Or Be Subjected To Discrimination Under Any Program Or Activity Receiving Financial Assistance From The Army.

Details: Description Quantity Unit Item Description 1 Lot Procurement Of Integrated Full Mission Bridge And Engine Room Simulator With Desktop Station Full Mission Bridge Simulator (fmbs) And Mini Bridge Stations’ Features And Applications, Major Components, Bridge Simulator Performance Standards And Hardware 1. Major Components The Full Mission Bridge Simulators That Can Be Integrated With Engine Simulators Shall Consist Of The Following Major Components: A. One (1) Full Mission Bridge Station With 270° Horizontal Display (class A Configuration); B. Seven (7) Mini Bridge Stations With 120° Horizontal Display (class B Configuration); C. One (1) Server Station; D. One (1) Instructor Station; E. One (1) Simulator Scenario Development Station; And F. One (1) Briefing/ Debriefing Station. 2. Features And Applications 2.1 The Bridge Simulator Should Provide A Realistic, Ship-like Environment Based On Real Hardware Consoles And High-quality Visualization. The Systems Include Major Components Such As Conning, Radar/ Arpa And Ecdis, Gmdss, Navigation Equipment, Bearing Finder, Steering Control Console, Engine Control, Auto Pilot System, Overhead Display, Etc. 2.2 The Bridge Simulator Product Shall Be Certified And Compliant As Class A (full Mission), B (multi-task), C (limited Task), And D (cloud-based Distant Learning) Type-approved Maritime Simulator System By An Internationally Recognized Classification Society. The Compliance With Classification Shall Be Reflected In The Certificate Of The Product. 2.3 The Simulator Can Be Utilized To A Variety Of Navigation Techniques Under Different Environmental Conditions, Serving A Wide Range Of Purposes As Follows: 1. Control Of The Ship While Navigating In The Operational And Emergency Modes In Various Weather Conditions With The Possibility Of Setting Wind And Current Parameters; 2. Analysis Of The Above-water Situation In Day And Night Conditions; In Poor Visibility By Visible Navigation Lights And Information Received From Radar/ Arpa; 3. Use Of The Electronic Chart-based Navigational Information System (ecdis); 4. Practical Use Of Radio Equipment And Global Maritime Distress And Safety System (gmdss) Facilities; 5. Application Of The International Regulations For Preventing Collisions At Sea; 6. Ship Control During Anchoring And Mooring; 7. Ship Control During Towing Operations; 8. Ship Control During Maneuvers "man Overboard"; 9. Rational Methods Of Ship Control In Case Of Main Engines (me) And Ship And Navigation Equipment Failures During Movement; 10. Eye Survey Of Above-water And Radar Situation, Determination Of Vessel Movement Elements; 11. Navigational Situation Assessment By Visual Observation During Daytime, By Lights At Night Time And By Observation Of Transmission Of Echo Signals On Ppi Simulators In Conditions Of Limited Visibility; 12. Visual Determination Of Vessel Movement Patterns, Maneuvering Capabilities And Dimensions; 13. Selection And Execution Of Collision Avoidance Maneuvers In Open Sea, During Night And In Limited Visibility Conditions Using Radar/arpa; 14. Evaluation Of Accuracy Of Primary And Secondary Information Received From Arpa, Consideration Of Factors Affecting Accuracy Of Arpa And Delay In Formation Of Secondary Radar Information; 15. Orientation Of Ships In Complex Navigation Conditions In Daytime And Nighttime And In Conditions Of Limited Visibility; 16. Use Of Ecdis For Preliminary And Executive Plotting, Practicing Correct Response To Emergency Signals Produced By Ecdis, Solution Of Chart-metric Tasks And Ensuring Safety Of Navigation With The Use Of Information Received From Ecdis; 17. Use Of Basic Capabilities Of Marine Mobile Service And Marine Mobile Satellite Service. 2.4 The Bridge Simulator Product Shall Be Able To Address The Following Stcw Competencies And Shall Be Reflected In The Certificate. · Table A-ii/1.1 - Plan And Conduct A Passage And Determine Position. • Table A-ii/1.2 - Maintain A Safe Navigational Watch. • Table A-ii/1.3 - Use Of Radar And Arpa To Maintain Safety Of Navigation. § Table A-ii/1.4 - Use Of Ecdis To Maintain The Safety Of Navigation. • Table A-ii/1.5 - Respond To Emergencies. • Table A-ii/1.6 - Respond To A Distress Signal At Sea. • Table A-ii/1.8 - Transmit And Receive Information By Visual Signaling. • Table A-ii/1.9 - Manoeuvre The Ship. • Table A-ii/2.1 - Plan A Voyage And Conduct Navigation. • Table A-ii/2.2 - Determine Position And The Accuracy Of Resultant Position Fix By Any Means. • Table A-ii/2.3 - Determine And Allow For Compass Errors. • Table A-ii/2.4 - Co-ordinate Search And Rescue Operations. • Table A-ii/2.5 - Establish Watchkeeping Arrangements And Procedures. • Table A-ii/2.6 - Maintain Safe Navigation Through The Use Of Information From Navigation Equipment And Systems To Assist Command Decision-making. • Table A-ii/2.7 - Maintain The Safety Of Navigation Through The Use Of Ecdis And Associated Navigation Systems To Assist Command Decision Making. • Table A-ii/2.10 - Maneuver And Handle A Ship In All Conditions. • Table A-ii/2.11 - Operate Remote Controls Of Propulsion Plant And Engineering Systems And Services. • Table A-ii/3.1 - Plan And Conduct A Coastal Passage And Determine Position. • Table A-ii/3.2 - Maintain A Safe Navigational Watch. • Table A-ii/3.3 - Respond To Emergencies. • Table A-ii/3.4 - Respond To A Distress Signal At Sea. • Table A-ii/3.5 - Manoeuvre The Ship And Operate Small Ship Power Plants. • Table A-ii/4.1 - Steer The Ship And Also Comply With Helm Orders In The English Language. • Table A-ii/4.2 - Keep A Proper Look-out By Sight And Hearing. § Table A-ii/5.2 - Contribute To Berthing, Anchoring And Other Mooring Operations. • Table A-v/4-1.1 - Contribute To Safe Operation Of Vessels Operating In Polar Waters. • Table A-v/4-1.2 - Monitor And Ensure Compliance With Legislative Requirements. • Table A-v/4-1.3 - Apply Safe Working Practices, Respond To Emergencies. • Table A-v/4-1.4 - Ensure Compliance With Pollution-prevention Requirements And Prevent Environmental Hazards. • Table A-v/4-2.1 - Plan And Conduct A Voyage In Polar Waters. • Table A-v/4-2.2 - Manage The Safe Operation Of Vessels Operating In Polar Waters. • Table A-v/4-2.3 - Maintain Safety Of The Ship's Crew And Passengers And The Operational Condition Of Life- Saving, Firefighting And Other Safety Systems. 2.5 The Bridge Simulator Shall Allow For Training And Certification Of Watch Officers, Chief Officers, Captains, And Pilots Serving On Commercial And Fishing Vessels Of 500 Gross Tonnage Or More In Accordance With The Requirements Of The Imo Stcw Convention And Model Courses: · 1.07 – Radar Navigation, Radar Plotting And Use Of Arpa; · 1.08 – Radar, Arpa, Bridge Teamwork And Search & Rescue; · 1.22 – Ship Simulator And Bridge Teamwork; · 1.27 – Operational Use Of Electronic Chart Display And Information System (ecdis); · 1.32 – Operational Use Of Integrated Bridge System; · 1.34 – Operational Use Of Ais; · 2.02 – Maritime Sar Coordinator; · 3.11 – Marine Accident And Incident Investigation With Compendium; · 3.19 – Ship Security Officer; · 3.23 – Actions To Be Taken To Prevent Acts Of Piracy And Armed Robbery; · 7.01 – Master And Chief Mate; · 7.03 – Officer In Charge Of Navigational Watch; · 7.05 – Officer In Charge Of Navigational Watch Of Fishing Vessel; · 1.25 – General Operator’s Certificate For The Gmdss; · 1.26 – Restricted Operator’s Certificate For The Gmdss. 2.6 The Bridge Simulator Shall Have All The Ownship Models, Target Ship Models , Objects And Exercise Areas Available In The Database Of The Simulator Product. It Shall Also Include Polar Areas, The Existing Models And Areas In Current Simulator, Naval And Coast Guard Ship Models, Ship Models Ready For Integration With Engine Simulators And Ship/engine Models Using Future Fuels. 2.7 The Simulator Shall Have Intercom Installed In The Instructor Station And All Bridge Stations. 2.8 The Simulator Shall Have An Evaluation And Assessment Method Designed For The Evaluation And Assessment Of A Range Of Predefined Assessment Parameters From The Following Categories: • Planning And Conducting A Passage And Determine Position; • Maintain Safe Navigational Watch; • Using Radar And Arpa To Maintain Navigational Safety; • Ability To Operate And Analyze Information Obtained From Arpa; • Respond To Emergencies; • Use Imo Standard Marine Communication Phrases And Use English Inwriting And Speaking; • Transmit And Receive Information Using Visual Signals; • Maneuver The Ship; • Colreg. 2.9 The Simulator Shall Have The Ability To Set Up A Scoring And Grading System To Evaluate The Operator’s Performance. The Program Allows The Instructor To Monitor The Results Of The Bridge Team / Operator Workstation Performance. 2.10 The Simulator Shall Be Capable Of Simulating Ship Operation In Polar Waters Or Ice Navigation According To The Polar Code And Shall Have The Following Training Capabilities: - Ice Management Of Offshore Installations In An Arctic Environment, - Use Of Radar Data And Ice Charts In Ecdis While Navigating In Ice Conditions, - Following Of Icebreakers, - Offshore Loading Operations To Include Mooring To Single Point Mooring And Floating Production Storage And Offloading Equipment In Ice Conditions, And - Navigation In Shattered Ice, Along Hard Ice Edges, Bumping Against Ice Edges, In Open Pack Ice, In Ice Holes, And Spots Of Ice-free Water. 2.11 The Ice Navigation Environment Shall Have The Following Characteristics: - Capable Of Ice Accumulation On Ship Superstructure, - Ship’s Tracks On Ice Fields Re-freeze As Programmed By The User, - Ice Mounds And Channels Can Be Added By The User, - Characteristics Of Ice Resistance Are Based On The Type Of Ice, Thickness, And Accumulation, - Capable Of Traversing Large Ice Areas, And - Realistic Representation Of Iceberg Objects. 3. Bridge Simulator Performance Standards 3.1 Physical Realism The Bridge Simulator Stations Shall Have The Following Physical Realism: A. The Equipment, Consoles, And Workstations Shall Be Installed, Mounted, And Arranged In A Manner That Mimics An Actual Bridge Of A Ship. B. The Workstations Shall Have Standard Rubber Mat Flooring. The Simulator Shall Have The Following Equipment: C. Controls Of Propulsion Plant Operations, Including Engine Telegraph, Pitch-control And Thrusters. There Shall Be Indicators For Shaft(s) Revolutions And Pitch Of Propeller(s). There Shall Be Controls For At Least One Propeller And One Bow Thruster. D. Controls Of Propulsion Plant For Mooring Operations. By Any Method, It Shall Be Possible To Observe The Ship's Side And The Dock During Operation Of Such Controls. E. Controls Of Auxiliary Machinery. There Shall Be Controls For At Least Two Auxiliary Engines, Including Electric Power Supply Control. F. Steering Console, Including Equipment For Hand Steering And Automatic Steering With Controls For Switchover. There Shall Be Indicators Of Rudder Angle And Rate Of Turn. G. Steering Compass And Bearing Compass (or Repeater) With An Accuracy Of At Least 1 Degree. H. At Least One Radar/arpa Display/unit (automatic Radar Plotting Aid). It Shall Be Possible To Simulate Both A 10 Cm (s-band) And A 3 Cm (x-band) Radars. The Radar Shall Be Capable To Operate In The Stabilised Relative-motion Mode And Sea- And Ground-stabilised True-motion Modes (see Stcw Section A-1/12.4.1 And 1/12.5 And Paragraph 2 Of Section B-i/12). I. Communication Equipment Per Gmdss (global Maritime Distress Safety System) Framework, Covering At Least The Requirements For The Relevant Area. J. The Simulator Shall Include A Communications System That Will Allow For Internal Ship Communications To Be Conducted. K. Ecdis (electronic Chart Display And Information System) Displaying Selected Information From A System Electronic Navigational Chart (senc) With Positional Information From Navigation Sensors Like Ais And Radar To Assist The Mariner In Route Planning And Route Monitoring, And By Displaying Additional Navigation-related Information. (see Stcw Section B-i/12). L. Gps (global Positioning System), Echo-sounder And Speed Log Showing Speed Through The Water (1 Axis) For Ships Below 50,000 Grt And In Addition Speed And Distance Over Ground In Forward And Athwart Ship Direction For Ships Above 50,000 Grt. M. Instrument (anemometer) For Indication Of Relative Wind- Direction And Force. N. Ship Sound Signal Control Panel According To Colreg. O. Instrument For Indication Of Navigational Lights. P. Function For Transmitting Visual Signals (morse Light). Q. Control System For General Alarm And Fire Detection/alarm And Other Alarms. R. Ais (automatic Identification System). S. Ship-borne Meteorological Instrument. The Simulator Shall Have The Following Additional Requirements For Training In Ice Navigation: T. Controls For Propulsion Plant Operations, Including Engine Telegraph, Pitch Control, And Thrusters. There Shall Be Indicators For Shaft Revolutions And Pitch Of Propeller. There Shall Be Controls For At Least One Propeller And One Bow Thruster. U. Two Speed And Distance Measuring Devices. Each Device Should Operate On A Different Principle, And At Least One Device Should Be Capable Of Being Operated In Both The Sea And The Ground Stabilized Mode. V. Searchlight Controllable From Conning Positions. W. Manually Operated Flashing Red Light Visible From Astern To Indicate When The Ship Is Stopped. X. Vdr (voyage Data Recorder) Or Capability For Vessel History Track And Learner Actions Log From The Instructor And The Assessor Position. Y. Equipment Capable Of Receiving Ice, Icing Warnings, And Weather Information Charts. Z. Anchoring And Towing Arrangements. The Simulator Shall Have The Following Additional Requirements For Training In Integrated Bridge Systems Including Integrated Navigation Systems: Aa. Workstation For Navigating, Maneuvering And Monitoring Consisting Of: · Radar/arpa · Ecdis · Conning Display · Binoculars Control · Autopilot Control · Observer Position/ Visual Control · Information On Position-fixing Systems · Information On Ship Automatic Identification System (ais) · Heading Control System · Flags, Daytime Shapes And Sound Signals · Control For The Main Engine Including Emergency Stop · Control For The Main Rudder Using Helm · Controls For Thruster · Two-way Vhf Radiotelephone (walkie-talkie) With Charging Connection · Internal Communication Equipment · Public Address System · Vhf With Channel Selector · Remote Control For Searchlight · Rudder Pump Selector Switch · Steering Mode Selector Switch · Steering Position Selector Switch · Illumination Of Equipment And Displays In The Surrounding Darkness · Sound Reception System · Acknowledgment Of The Watch Alarm · Controls For Console Lighting · Indicators For: - Propeller Revolutions (actual And Desired) - Main Engine Revolution In The Case Of Reduction Geared Engine - Propeller Pitch In The Case Of Controllable Pitch Propeller - Torque - Starting Air - Lateral Thrust - Speed - Rudder Angle - Rate-of-turn - Gyro Compass Heading - Magnetic Compass Heading - Heading Reminder (pre-set Heading) - Water Depth Including Depth Warning Adjustment - Time - Wind Direction And Velocity - Air And Water Temperature - Clinometer - Alarms · Signal Transmitter For: - Whistle - Automatic Device For Fog Signals - Alarms, (general Alarm, Emergency Alarm, Etc.) - Morse Signaling Light Bb. Workstation For Manual Steering (wheelhouse) Consisting Of: · Steering Wheel · Rudder Pump Selector Switch · Indications For: - Gyro Compass Heading - Magnetic Compass Heading - Pre-set Heading - Rudder Angle - Rate Of Turn Cc. Workstation For Planning And Documentation Consisting Of: · Ecdis Including Navigation Planning Station · Route Planning Devices · Chart Table · Paper Charts · Plotting Aids Dd. Workstation For Communications Consisting Of: · Gmdss Equipment As Required For The Applicable Sea Area · Vhf-dsc, Radiotelephone · Mf-dsc, Radiotelephone · Mf/hf-dsc, Nbdp, Radiotelephone · Mf/hf Mf/hf Radio Telex · Inmarsat-ses, Egc Rx With Lrit And Ssas · Navtex/egc/hf Direct Printing Telegraph · Fbb/iridium · Cospas-sarsat Epirb · Sart · Ais Sart · Main Station For Two-way Vhf Radiotelephone · Aircraft Vhf Radiotelephone · Gmdss Alarm Panel · Radio Direction Finder Rt-500-m (marine) · Power Switchboard · Battery Charger · Virtual Printer Ee. All Systems Related To The Integrated Bridge System Shall Include Failure Control(s) And Method(s) To Train And Assess The Learner In The Use Of Advanced Equipment, Technology And Enable Familiarization And Training To Understand The Limitations Of Automatic Systems. 3.2 Behavioral Realism The Bridge Simulator Stations Shall Have The Following Behavioral Realism: A. The Simulation Of Ownship Shall Be Based On A Mathematical Model With 6 Degrees Of Freedom. B. The Model Shall Realistically Simulate Own Ship Hydrodynamics In Open Water Conditions, Including The Effects Of Wind Forces, Wave Forces, Tidal Stream And Currents. C. The Model Shall Realistically Simulate Own Ship Hydrodynamics In Restricted Waterways, Including Shallow Water And Bank Effects, Interaction With Other Ships And Direct, Counter And Sheer Currents. D. The Simulator Shall Include Mathematical Models Of Different The Types Of Ownships. E. The Simulator Shall Include Tug Models That Can Realistically Simulate Tug Assistance During Maneuvering And Escort Operations. It Shall Be Possible To Simulate Pull, Push, Reposition Towing And Escorting. F. The Simulator Shall Include Exercise Areas Including Correct Data For Landmass, Depth, Buoys, Tidal Streams And Visual As Appropriate To The Nautical Chart And Publication Used For The Relevant Training Objectives. G. The Radar Simulation Equipment Shall Be Capable Of Model Weather, Tidal Streams, Current, Shadow Sectors, Spurious And False Echoes And Other Propagation Effects, And Generate Coastlines, Navigational Buoys And Search And Rescue Transponders. H. The Arpa Simulation Equipment Shall Incorporate The Facilities For: - Manual And Automatic Target Acquisition - Fast Track Information - Use Of Exclusion Areas - Vector/graphic Time-scale And Data Display - Trial Maneuvers. I. The Ecdis Simulation Equipment Shall Incorporate The Facilities For: - Integration With Other Navigation Systems - Own Position - Sea Area Display - Mode And Orientation - Chart Data Displayed - Route Monitoring - User-created Information Layers - Contacts (when Interfaced With Ais And/or Radar Tracking) - Radar Overlay Functions. J. The Simulator Shall Provide An Own Ship Engine Sound, Reflecting The Power Output. K. The Simulator Shall Provide Capabilities For Realistically Conduct Anchoring Operations. L. The Model Shall Realistically Simulate Own Ship Hydrodynamics In Interaction With Applicable Anchor And Chain Dimensions With Different Bottom Holding Grounds, Including The Effects Of Wind Forces, Wave Forces, Tidal Stream And Currents. M. The Simulator Shall Provide Capabilities For Realistically Simulate The Function Of Mooring And Tug Lines And How Each Line Functions As Part Of An Overall System Taking Into Account The Capacities, Safe Working Loads, And Breaking Strengths Of Mooring Equipment Including Mooring Wires, Synthetic And Fiber Lines, Winches, Anchor Windlasses, Capstans, Bitts, Chocks And Bollards. The Simulator Shall Have The Following Additional Requirements For Training In Ice Navigation: N. The Own Ship Model Shall Realistically Simulate Hydrodynamics In Interaction With Solid Ice Edge. O. The Own Ship Model Shall Realistically Simulate Hydrodynamics And Ice Pressure In Interaction With Solid And Packed Ice. Ship Motion In Solid Ice Should Affect At Least Ship Speed And Turning Radius. P. The Own Ship Model Shall Realistically Simulate The Effects Of Reduced Stability As A Consequence Of Ice Accretion. Q. It Shall Be Possible To Simulate The Effect Of The Following Ice Conditions With Variations: - Ice Type - Ice Concentration - Ice Thickness. R. It Shall Be Possible To Realistically Simulate The Towing Of Ownship – Ownship, And Own Ship Target Ship And Target Ownship. It Shall Be Possible To Introduce Different Towing Gear Like Rope Or Steel Wire With Different Strength And Elasticity, Forward, Stern And Side Towing. S. It Shall Be Possible To Realistically Simulate The Interaction Between The Ships Propeller Wash And The Ice. T. It Shall Be Possible To Realistically Simulate Ice Drift. U. The Simulator Shall Be Equipped With Iceberg Targets Of At Least Six Different Sizes Including Realistic Underwater Bodies Which Interacts With The Sea Bottom. The Icebergs Should Be Visible On The Ship's Radar. V. Motion Through Ice Hummocks Should Be Simulated Realistically Considering Ship Icebreaking Capabilities And Affect Ship's Speed, Roll And Pitch. The Simulator Shall Have The Following Additional Requirements For Training In Integrated Bridge Systems Including Integrated Navigation System: W. The Integrated Navigation System Should Combine Process And Evaluate Data From All Sensors In Use. The Integrity Of Data From Different Sensors Should Be Evaluated Prior To Distribution. X. The Integrated Navigation System Shall Ensure That The Different Types Of Information Are Distributed To The Relevant Parts Of The System, Applying A Consistent Common Reference System For All Types Of Information. Y. The Integrated Navigation System Shall Provide Information On Position, Speed, Heading, And Time. Z. The Integrated Navigation System Shall Be Able To Automatically, Continually And Graphically Indicate The Ship's Position, Speed And Heading And, Where Available, Depth In Relation To The Planned Route As Well As To Known And Detected Hazards. Aa. The Integrated Navigation System Shall, In Addition, Provide Means To Automatically Control Heading, Track Or Speed, And Monitor The Performance And Status Of These Controls. Bb. Alarms Shall Be Displayed So That The Alarm Reason And The Resulting Functional Restrictions Can Be Easily Understood. 3.3 Operating Environment The Bridge Simulator Shall Exhibit The Following Operating Environment: A. The Simulator Shall Be Able To Present Different Types Of Target Ships, Each Equipped With A Mathematical Model, Which Accounts For Motion, Drift And Steering Angles According To Forces Induced By Current, Wind Or Wave. B. The Targets Shall Be Equipped With Navigational And Signal-lights, Shapes, And Sound Signals, According To Rules Of The Road. The Signals Shall Be Individually Controlled By The Instructor, And The Sound Signals Shall Be Directional And Fade With Range. Each Ship Shall Have An Aspect Recognizable At A Distance Of 6 Nautical Miles In Clear Weather. A Ship Underway Shall Provide Relevant Bow- And Stern Wave. C. The Simulator Shall Be Equipped With Targets Enabling Search And Rescuing Persons From The Sea, Assisting A Ship In Distress And Responding To Emergencies Which Arise In Port. Such Targets Shall At Least Be: · Rocket Parachute Flares · Hand Flares · Buoyant Smoke Signals · Sart (search And Rescue Transponder) · Satellite Epirb (emergency Position Indicating Radio Beacon) · Lifeboat · Life Raft · Rescue Helicopter · Rescue Aircraft · People In Water. D. The Simulator Shall Be Able To Present At Least 20 Target Ships At The Same Time, Where The Instructor Shall Be Able To Programme Voyage Routes For Each Target Ship Individually. (see Stcw Section A-1/12.4.3) E. The Simulator Shall Provide A Realistic Visual Scenario By Day, Dusk Or By Night, Including Variable Meteorological Visibility, Changing In Time. It Shall Be Possible To Create A Range Of Visual Conditions, From Dense Fog To Clear Conditions. F. The Visual System And/or A Motion Platform Shall Replicate Movements Of Own Ship According To 6 Degrees Of Freedom. G. The Projection Of The View Shall Be Placed At Such A Distance And In Such A Manner From The Bridge Windows That Accurate Visual Bearings May Be Taken To Objects In The Scene. It Shall Be Possible To Use Binocular Systems For Observations. H. The Visual System Shall Present The Outside World By A View Around The Horizon (360°). The Horizontal Field Of View May Be Obtained By A View Of 270° And Where The Rest Of The Horizon May Be Panned (to Move The “camera”). (applicable Only To Full Mission Bridge Station With 270° Horizontal Display) I. The Visual System Shall Present The Outside World By A View Of At Least 120° Horizontal Field Of View. In Addition, At Least The Horizon From 120° Port To 120° Starboard Shall Be Able To Be Visualised By Any Method. (applicable Only To Mini Bridge Station With 120° Horizontal Display). J. The Visual System Shall Present A Vertical View From The Workstations For Navigation, Traffic Surveillance And Manoeuvring Enabling The Navigator To Detect And Monitor Objects Visually On The Sea Surface Up To The Horizon Within The Required Horizontal Field Of View When The Ship Is Pitching And Rolling. In Addition, By Any Method, It Shall Be Possible To Observe The Ship's Side And The Dock During Mooring Operations. K. The Visual System Shall Present All Navigational Marks According To Charts Used. L. The Visual System Shall Show Objects With Sufficient Realism (detailed Enough To Be Recognized As In Real Life). M. The Visual System Shall Show Mooring And Towing Lines With Sufficient Realism In Accordance With The Forces Effecting The Tension. N. The Visual System Shall Provide A Realistic Set Of Bow Wave, Sea Spray And Wakes In Accordance With Ships Power Output, Speed And Weather Conditions. O. The Visual System Shall Provide A Realistic Set Of Flue Gas Emission And Waving Flag Effect In Accordance With Ships Power Output, Speed And Weather Conditions. P. The Simulator Shall Be Capable Of Providing Environmental Sound According To Conditions Simulated. Q. The Navigated Waters Shall Include A Current Pattern, Changeable In Time, According To The Charts Used. Tidal Waters Shall Be Reflected. R. The Simulation Shall Include The Depth According To Charts Used, Reflecting Water Level According To Tidal Water Situation. S. The Simulator Shall Provide At Least Two Different Wave Spectra, Variable In Direction Height And Period. T. The Visual System Shall Provide A Realistic Set Of Wind Waves Including White Caps According To The Beaufort Wind Force Scale. The Simulator Shall Have The Following Additional Requirements For Training In Ice Navigation: U. The Visual System Shall Be Capable Of Showing Concentrations Of Solid And Broken Ice Of Different Thickness. V. The Visual System Shall Be Capable Of Showing The Result Of Icebreaking Including Opening, Twin Breaking And Compacting Channel. W. The Visual System Shall Be Capable Of Showing The Effects Of Searchlight. X. The Visual System Shall Be Capable Of Showing The Effects Of The Ice Accretion To The Own Ship Model. The Simulator Shall Have The Following Additional Requirements For Training In Integrated Bridge Systems Including Integrated Navigation Systems: Y. There Shall Be A Field Of View Around The Vessel Of 360° Obtained By An Observer Moving Within The Confines Of The Wheelhouse Or May Be Panned (to Move The Camera). 4. Hardware Requirements 1 Set 4.1 Full Mission Bridge Simulator (horizon Field View Of 270 Degrees) A. Steel Fabrication Of Main Bridge Consoles Consisting Of: I. Conning/maneuvering Console Ii. Radar Console Iii. Ecdis Console Iv. Bearing Console V. Navigation Aid Equipment Console Vi. Gmdss Console Vii. Steering Stand/console Viii. Chart Table Ix. Overhead Panel X. Gyro Repeater With Pelorus Stand Xi. Binoculars Xii. The Console Must Made Of Steel W/ Handrails B. Visual Specification (minimum Requirements) I. 9x 70” Visual Screens Led Backlit 1. Pc Visual Channel 2. Intel Core I5 Processor 3. 16 Gb Ram 4. 256 M.2 Ssd 5. Rtx 4070 Or Higher 6. Keyboard/mouse 7. Hdmi Cable 8. Ups 1.5kva A. Surge Protection B. W/ Automatic Voltage Regulator C. 1x Conning Console (minimum Requirements) 1. Intel Core I5 Processor 2. 8 Gb Ram 3. 256 M.2 Ssd 4. 2x Monitor 24” 5. Keyboard/mouse 6. Ups 1.5kva A. Surge Protection B. W/ Automatic Voltage Regulator 7. Console Made Of Steel (tct 0.8 Mm To 2 Mm) 8. Instrument Adds On Conning Console. D. 2x Ecdis Console (minimum Requirements) 1. Intel Core I5 Processor 2. 8 Gb Ram 3. 256 M.2 Ssd 4. Monitor 24” 5. Keyboard/mouse 6. Ups 1.5kva A. Surge Protection B. W/ Automatic Voltage Regulator 7. Console Made Of Steel (tct 0.8 Mm To 2 Mm) E. 2x Radar / Arpa Console (minimum Requirements) 1. Intel Core I5 Processor 2. 8 Gb Ram 3. 256 M.2 Ssd 4. Monitor 24” 5. Keyboard/mouse 6. Ups 1.5kva A. Surge Protection B. W/ Automatic Voltage Regulator 7. Console Made Of Steel (tct 0.8 Mm To 2 Mm) F. Binocular And Instrument (minimum Requirements) 1. Intel Core I5 Processor 2. 8 Gb Ram 3. 256 M.2. Ssd 4. Rtx 4070 Or Higher 5. Keyboard/mouse 6. 2x 24" Monitor 7. Ups 1.5kva A. Surge Protection B. W/ Automatic Voltage Regulator 8. Console Made Of Steel (tct 0.8 Mm To 2 Mm) G. Overhead Panel Display 1. Intel Core I5 Processor 2. 8 Gb Ram 3. 256 M.2 Ssd 4. At Least 1width And 0.4height 5. Keyboard/mouse 6. Ups 1kva A. Surge Protection B. W/ Automatic Voltage Regulator H. Radar/arpa I. Radar/arpa Keyboard (1 Set) Specifications: 1. Usb Interface 2. Console Mount Type I. Handset I. Handset Includes: 1. Handset 2. Cradle With A Ptt Switch 3. Usb Interface Board 4. Handset Box J. 1x Chart Table Console 1300mm X 1312mm (minimum Requirements) 1. Intel Core I5 Processor 2. 8 Gb Ram 3. 256 M.2 Ssd 4. 2x Monitor 24” 5. Keyboard/mouse 6. Ups 1kva A. Surge Protection B. W/ Automatic Voltage Regulator Ii. 1x Parallel Ruler Iii. 1x One-hand Compass Divider Steel Iv. 10x Plotting Triangle With Handle V. 1x Deck Log Book Vi. 1x Night Order Book Vii. 1x Bell Book Viii. 1x Chronometer Ix. Admiralty Paper Charts Related To Installed Maps In Simulator K. Gyro Repeater With Pelorus Stand 1. Bearing Repeater Compass 2. Pelorus Stand 3. Power: 24vd 4. Signal: Rs422 Nmea L. Weather Instruments 1. 1x Ships Clock 2. 1x Aneroid Barometer 3. 1x Hygrometer. M. Speaker With Subwoofer I. Channel Sound System Specification: 1. Interface With Visual Pc 2. Realization Of 3d Sound Effect System 3. Atleast 450watts Speaker With Subwoofer 4. Port: Mini Jack 7 Sets 4.2 Mini Bridge Simulator (horizon Field View Of 120 Degrees) A. Consoles Made In Formica Laminated Board Fabrication Of Main Bridge Consoles Consisting Of: I. Conning Console Ii. Radar Console Iii. Ecdis Console Iv. Maneuvering Console V. Chart Table With Gooseneck Dimming Light B. Mini Bridge Desktop Station (bridge Image Generator Computer For Visual, Conning, Radar, Maneuvering And Overhead Display) I. 3x 45” 4k Display For Visual (minimum Requirements) Ii. 1x Computer (minimum Requirements) 1. 256 M.2 Ssd 2. Rtx 4070 Or Higher 3. 1 X Keyboard/mouse 4. Ups 1.5kva A. Surge Protection B. W/ Automatic Voltage Regulator Iii. 1 X Computer (minimum Requirements) 1. Intel Core I5 Processor 2. 8 Gb Ram 3. 256 M.2 Ssd 4. Keyboard/mouse 5. 24” Monitor 6. Ups 1.5kva A. Surge Protection B. W/ Automatic Voltage Regulator Iv. 1 X Overhead Panel Display V. 1 X Speakers (minimum Requirements) 1. Interface With Visual Pc 2. Realization Of 3d Sound Effect System 3. Atleast 150 Watts Speaker With Subwoofer 4. Port: Mini Jack Vi. 1 X Goose Neck Microphone Vii. 1 X Set Desktop Instrument Console Including: 1. Steering System / Autopilot / Nfu 2. Steering Wheel Viii. Dual Telegraph 1. 1 X Console Tables 2. 1 X Handheld Uhf Equipment 3. 1 X Console Made In Formica Laminated Board (tct 3/4 Inches) Ix. Chart Table And Plotting Aids (minimum Requirements) 1. Intel Core I5 Processor 2. 8 Gb Ram 3. 256 M.2 Ssd 4. 1x Monitor 24” 5. Keyboard/mouse 6. Ups 1kva A. Surge Protection B. W/ Automatic Voltage Regulator X. 1x Parallel Ruler Xi. 1x One-hand Compass Divider Steel Xii. 1x Plotting Triangle With Handle Xiii. 1x Chart Table At Least 1000mm X 700mm Xiv. 1x Deck Log Book Xv. 1x Night Order Book Xvi. 1x Bell Book Xvii. 1x Chronometer 1 Set 4.3 Bridge Instructor Station A. Instructor Station I. 1x Computer (minimum Requirements) 1. 2x 24” Monitor 2. Intel Core I5 Processor 3. 16 Gb Ram 4. 256 M.2 Ssd 5. Rtx 4070 Or Higher 6. Keyboard/mouse 7. Ups 1.5kva 1. Surge Protection 2. W/ Automatic Voltage Regulator Ii. 1x Handset 1. Handset 2. Cradle With A Ptt Switch 3. Usb Interface Board 4. Handset Box Iii. 1x Speaker 1. Type: Desktop 2. Port: Mini Jack Iv. 1x Steel Cabinet W/ Lock 1. Metal Drawer Office Drawer 2. File Cabinet Storage With Wheel V. 1x Drone View Monitor W/ Smart Tv 55” Tv Led (environment View Of Instructor) Vi. 1x Smart Tv 55” Tv Led For Cctv Vii. 1x Printer 1. Laser Printer A4 2. A4 Print Speed Up To 48 Ppm 3. Auto 2-sided (duplex) Printing, 1-line Lcd 4. Wifi, Airprint, Mopria, Wifi Direct, Lan, Usb 2.0 5. Colored Printer Viii. Instructor Station Table Specification: Ix. 1x Table Size: At Least L 1700 X W 700 X H 750 Mm 1. Material: Formica Matt Laminate On Chipboard X. Intercom Telephone / Public Announcement System Xi. 9x Two-way Vhf Radiotelephone (walkie-talkie) With Charging Connection Xii. 1x Ergodynamic Chair Xiii. 1x Document Metal Cabinet With Glass Sliding Door 1. Size: 1850x 400mmx 900mm 2. Door Lock 1 Set 4.4 Bridge Simulator Scenario Development Station B. Scenario Development Station As An Instructor Station Capable Of Deploying Scenarios To Other Stations. I. 1x Computer (minimum Requirements) 1. 2x 24” Monitor 2. Intel Core I5 Processor 3. 16 Gb Ram 4. 256 M.2 Ssd 5. Rtx 4070 Or Higher 6. Keyboard/mouse 7. Ups 1.5kva 1. Surge Protection 2. W/ Automatic Voltage Regulator Ii. 1x Table Size: At Least L 1200 X W 800 X H 750 Mm 1. Material: Formica Matt Laminate On Chipboard Iii. 1x Ergodynamic Chair 5. Software Requirements 5.1 Full Mission Bridge Simulator The Full Mission Bridge Simulator Shall Have The Following Software And Controls For The Following Workstations: A. Workstation For Navigating, Maneuvering And Monitoring Consisting: · One (1) Ecdis Master Software · One (1) Ecdis Slave Software · One (1) Conning Display Software · One (1) Radar/arpa 3cm · One (1) Radar/arpa 10cm · Nine (9) Realistic Visualization Software With 270° Field Of View · Keyboard And Trackball Controls For Ecdis, Radar Apra And Conning Display · Two (2) Vhf Dsc Radio W Ch16 · One (1) Overhead Panel Display · One (1) Main Engine Telegraph Including Emergency Stop Control With Printer · One (1) Bow And Stern Thruster Control · One (1) Gps Software · One (1) Bridge Navigational Watch Alarm System (bnwas) · One (1) Echo Sounder · One (1) Speed Log · One (1) Vr Binoculars · One (1) Observer Position/ Visual Control · One (1) Anchor Gear And Mooring Operations Control · One (1) Towing Control · One (1) Tugs Control · One (1) Autopilot Control System · Nfu/ Fu Controls · One (1) Tiller Controls · One (1) Information On Ship Automatic Identification System (ais) · One (1) Intercom Telephone Capable For Public Address System · One (1) Conference Microphone · One (1) Control For Searchlight · One (1) Gyro Repeater/pelorus Stand That Can Display Magnetic And Gyro Compass · One (1) Bearing Finder · One (1) Alarm System Panel For General Alarm, Fire Alarm, And Other Alarms · Navigation Lights Control · Flags, Daytime Shapes And Sound Signals Control · One (1) Two-way Vhf Radiotelephone (walkie-talkie) With Charging Connection · Sound Reception System · Acknowledgment Of The Watch Alarm · Information Indicators For: - Propeller Revolutions (actual And Desired) - Main Engine Rpm - Main Engine Revolution In The Case Of Reduction Geared Engine - Propeller Pitch In The Case Of Controllable Pitch Propeller - Torque - Starting Air - Lateral Thrust - Log Speed And Speed Over The Ground - Bow And Stern Speed - Athwartship Speed - Rudder Angle - Rate-of-turn - Gyro Compass Heading - Magnetic Compass Heading - Heading Reminder (pre-set Heading) - Water Depth Including Depth Warning Adjustment - Vessel Time - Wind Direction And Velocity - Air And Water Temperature - Clinometer - Alarms - Pilot Card - Maneuvering Characteristics - Scoring Exercise/ Assessment · Signal Transmitter For: - Whistle - Automatic Device For Fog Signals - Alarms, (general Alarm, Emergency Alarm, Etc.) - Morse Signaling Light B. Workstation For Manual Steering (wheelhouse) Consisting Of: · One (1) Steering Wheel · Rudder Pump Selector Switch · Steering Mode Selector Switch · Steering Position Selector Switch · Indications For: - Gyro Compass Heading - Magnetic Compass Heading - Pre-set Heading - Rudder Angle - Rate Of Turn - Steering Mode (fu/nfu) – Track Control/auto Navigation C. Workstation For Route Planning And Documentation Consisting Of: · Computer For Route Planning Devices (ecdis) · Chart Table With Drawers For Paper Charts, Flags And Pennants · Paper Charts · Plotting Aids · Chronometer · Weather Facsimile D. Workstation For Communications Consisting Of: · One (1) Handset For Radiotelephone · Gmdss Equipment As Required For The Applicable Sea Area · Vhf-dsc, Radiotelephone · Mf-dsc, Radiotelephone · Mf/hf-dsc, Nbdp, Radiotelephone · Mf/hf Mf/hf Radio Telex · Inmarsat-ses, Egc Rx With Lrit And Ssas · Navtex/egc/hf Direct Printing Telegraph · Fbb/iridium · Cospas-sarsat Epirb · Sart · Ais Sart · Main Station For Two-way Vhf Radiotelephone · Aircraft Vhf Radiotelephone · Gmdss Alarm Panel · Radio Direction Finder Rt-500-m (marine) · Power Switchboard · Battery Charger · Virtual Printer 5.2 Mini Bridge Simulator The Mini Bridge Simulators Shall Have Each Of The Following Software And Controls For The Following Workstations: E. Workstation For Navigating, Maneuvering And Monitoring Consisting: · One (1) Ecdis Master Software · One (1) Conning Display Software · One (1) Radar/arpa Interchangeable To 3cm & 10cm · Three (3) Realistic Visualization Software With 120° Field Of View · Keyboard And Trackball Controls For Ecdis, Radar Apra And Conning Display · One (1) Vhf Dsc Radio W Ch16 · One (1) Overhead Panel Display · One (1) Main Engine Telegraph Including Emergency Stop Control With Printer · One (1) Bow And Stern Thruster Control · One (1) Gps Software · One (1) Bridge Navigational Watch Alarm System (bnwas) · One (1) Echo Sounder · One (1) Speed Log · One (1) Vr Binoculars · One (1) Observer Position/ Visual Control · One (1) Anchor Gear And Mooring Operations Control · One (1) Towing Control · One (1) Tugs Control · One (1) Autopilot Control System · Nfu/ Fu Controls · One (1) Tiller Controls · One (1) Information On Ship Automatic Identification System (ais) · One (1) Intercom Telephone Capable For Public Address System · One (1) Conference Microphone · One (1) Control For Searchlight · One (1) Vdr Remote Alarm Panel · One (1) Bearing Finder · One (1) Alarm System Panel For General Alarm, Fire Alarm, And Other Alarms · Navigation Lights Control · Flags, Daytime Shapes And Sound Signals Control · One (1) Two-way Vhf Radiotelephone (walkie-talkie) With Charging Connection · Sound Reception System · Acknowledgment Of The Watch Alarm · Information Indicators For: - Propeller Revolutions (actual And Desired) - Main Engine Rpm - Main Engine Revolution In The Case Of Reduction Geared Engine - Propeller Pitch In The Case Of Controllable Pitch Propeller - Torque - Starting Air - Lateral Thrust - Log Speed And Speed Over The Ground - Bow And Stern Speed - Athwartship Speed - Rudder Angle - Rate-of-turn - Gyro Compass Heading - Magnetic Compass Heading - Heading Reminder (pre-set Heading) - Water Depth Including Depth Warning Adjustment - Vessel Time - Wind Direction And Velocity - Air And Water Temperature - Clinometer - Alarms - Pilot Card - Maneuvering Characteristics - Scoring Exercise/ Assessment · Signal Transmitter For: - Whistle - Automatic Device For Fog Signals - Alarms, (general Alarm, Emergency Alarm, Etc.) - Morse Signaling Light F. Workstation For Manual Steering (wheelhouse) Consisting Of: · One (1) Steering Wheel · Rudder Pump Selector Switch · Steering Mode Selector Switch · Steering Position Selector Switch · Indications For: - Gyro Compass Heading - Magnetic Compass Heading - Pre-set Heading - Rudder Angle - Rate Of Turn - Steering Mode (fu/nfu) G. Workstation For Route Planning And Documentation Consisting Of: · Computer For Route Planning Devices (ecdis) · Chart Table With Drawers For Paper Charts, Flags And Pennants · Paper Charts · Plotting Aids · Chronometer H. Workstation For Communications Consisting Of: · One (1) Handset For Radiotelephone · Gmdss Equipment As Required For The Applicable Sea Area · Vhf-dsc, Radiotelephone · Mf-dsc, Radiotelephone · Mf/hf-dsc, Nbdp, Radiotelephone · Mf/hf Mf/hf Radio Telex · Inmarsat-ses, Egc Rx With Lrit And Ssas · Navtex/egc/hf Direct Printing Telegraph · Fbb/iridium · Cospas-sarsat Epirb · Sart · Ais Sart · Main Station For Two-way Vhf Radiotelephone · Aircraft Vhf Radiotelephone · Gmdss Alarm Panel · Radio Direction Finder Rt-500-m (marine) · Power Switchboard · Battery Charger · Virtual Printer 5.3 Instructor Station 1. The Instructor Workstation Is An Integral Part Of The Simulator And Is Designed To Control The Training Complex, Design (develop) Exercises, Perform Exercises In Real Time, Control Exercise Performance By Trainees, Change Environmental Conditions And Sailing Circumstances, As Well As Enter Own Ship Failure Variables, Document, And Archive The Position And Activity Of The Ship Involved In The Exercise. The Instructor Station Software Should Contain Navigation Areas As Well As Sub-tasks For Each Area, Allowing The Control Of All Active Vessels And Target Ships. 2. Navigation Instructor Software Includes: · Navigation Instructor · Evaluation And Assessment · Tug And Mooring · Radar/arpa · Electronic Navigational Chart: · Bird Eye Of Instructor · Debriefing System 3. Simulator Session(s) Control: • Exercise(s) Start, Pause, Re-start After The Pause, Stop On Bridge(s); • Setting The Initial Position For Own Ships; • Entering Faults Of Navigation Systems, Steering Gear, Propulsion Plant, Fire And General Alarm; • Ability To Set Faults Of Navigational Equipment; • Pulling Apart Ships That Have Collided Or Run Aground; • Control Of Target Vessels, Hoisting Flags Of The International Code Of Signals, Turning Their Sound Signals On And Turning Their Lights On/off; 4. The Software Modules Should Provide A Possibility To Flexibly Configure The Required Bridge Configuration. General: · An Integrated Application For Exercise Editing, Conducting And Debriefing; · Highly Accurate Data Representation Based On Vector Diagrams (ability To Automatically Load All Diagrams Related To The Selected Game Area); · Tools For Creating Exercises And Automatic Competency Assessment Scenarios; · Displaying Of The Actual Ship Contours; · Display Of Object Tracks: Contour Or Point With Selectable Resolution, Track History And Time Stamps; · Using The Mouse Wheel For Chart Scaling; · Control Of Simulator Session(s); · Continuous Automatic Recording Of Data During Exercise (main, Audio And Video Log Files); · Real Time, Slow Time, And Fast Time Modes; · Ability To Display And Print A New Pilot Card And A Table Of Maneuvering Characteristics Of The Ship; · Setting Parameters And Faults Of Navigation Equipment: Radar, Gps, Loran C, Log, Gyro, Echo Sounder, Uais; · Setting Weather And Bathymetric Conditions: Global And Local Zones, Import Of Tide And Current Databases (ecdis); · Working With Measuring Tools: - Ability To Set Erbl; - Ability To Attach, Move Or Delete Erbl During An Exercise; 9. Ability To Attach Sart To The Life Raft; 5. Ability To Move Own Ship During Exercise Without Grounding Or Collision; 6. Ability To Apply Virtual Tug Force To 8 Points Of The Vessel’s Hull In Any Direction; 7. Display Of Actual Ship's Contours; 8. Continuous Display Of Parameters Of Vessel Movement And Environment Conditions: Course And Speed Of The Vessel, Course Over The Ground, Transversal Component Of Speed On The Bow And On The Stern, Gyro Heading, Rate Of Turn, Speed And Direction Of The Current And Wind, Height And Direction Of A Wave, Depth; 9. Independent Instructor Control For Wind And Swell Components Of The Wave; 10. Ability To Set Sea State Spectrum: · Pierson-moskowitz; · Phillips; · Ittc (international Towing Tank Conference); · Jonswap (joint North Sea Wave Project); · User. 11. Ability To Exclude Hydrodynamic Interaction With Mooring Walls In The Required Area; 12. Ability To Create A Template Containing A Set Of Objects (ships), Save And Use This Template In Other Exercises; 13. Ability To Save Environment Settings As A Template And Load A Previously Saved Template In Any Exercise And Area; 14. Mooring Operations: · Ability To Set The Rope Material; · Ability To Set The Initial State Of The Mooring Winch (render, Slack Away, Stop); · Ability To Set Mooring Winch Parameters (speed, Pulling Force, Holding Force); · Ability To Operate The Mooring Winch At The Instructor Workplace. 15. Anchor Operations: · Ability To Set User Ground Type With Required Anchor Holding Force Coefficients; · Display Of Anchor Position On The Instructor's Chart On The Ground. 16. Control Of Navigational Lights And Shapes: · Ability To Control The Navigational Lights; · Ability To Switch On/off Deck Lights On Target Ships. 17. Loading/discharging Of Own Ship During Exercises; 18. Weather Conditions Manager: · Ability To Set Predefined Weather Conditions By Beaufort Number (wind, Wave, Whitecaps And Foam, 3d Clouds, Cloud Layer, Visibility) On The Fly; · Ability To Set Customized Weather Conditions; · Visual Effects: Rain And Snow (low, Medium, High), Lightning, Reflection, Translucency, Sea With White Caps, Foam, Splashes, Bow-wave; · Separate Settings For Wind Wave And Swell; · Manual Control Of Wind Direction And Strength; · Adjustment Of Atmospheric Parameters – Temperature, Humidity, Pressure; · Ability To Use Thunderstorm, Precipitation; · Automatic Calculation Of The Position Of The Sun, Moon, Major Stars (up To 100) And Constellations, The Angle And Phase Of The Moon; · Ability To Set Wave Spectrum Type: Pierson-moskowitz; Jonswap (joint North Sea Wave Project); Phillips; User-defined; · Ability To Use Thunderstorm, Precipitation. 19. Rcc, Ship And Coast Stating Assignment; 20. Log Module With Possibility To Print Out And Create Archives; 21. Window For Listening/monitoring Of The Radiotelephone Traffic Including Possibilities To Interfere With Radiotelephone Traffic; 22. Ability To Introduce Background Noise From A List And Instrument Faults To The Trainee Stations. 23. Ability To Change Names, Call Signs, Mmsi, Telex Numbers And Inmarsat Mobile Numbers Of All Emulated Ship Stations And Coast Station According To The Needs Of Different Exercises; 24. Electronic Chart With Vessel Position Indication And The Ability To Change Position, Course And Speed; 25. Ability To Display And Instantly Change Trainee Station Positions On The Electronic Map For Search And Rescue (sar) Exercises; 26. Full Monitoring Of Any Trainee Workstation – The Ability To Monitor The Status Of Each Gmdss Unit And Listen To The Radio Traffic Of Each Trainee Station; 27. Connection To An External Printer; 28. Connection To An Active Speaker For Simultaneous Viewing Of Channels; 29. Providing Functions Of A Coast Telex Or Telephone Subscriber, Coast Radio Station And Rcc Operator From The Log Window; 30. Status Window For All Instruments At Any Workstation; 31. Ability To Log Communication And Trainee Actions For Playback And Later Review; 32. Database Of Coastal Stations, Navtex And Msi Stations And Inmarsat Shore-based Stations Plotted On The Chart; 33. Information About The Gmdss Sea Areas On The Chart; 34. Approximate Estimation Of Radio Wave Propagation In The Selected Frequency Range; 35. Evaluation And Assessment Module; 36. Navtex Functionality: · Ability To Send Navtex Messages On Behalf Of A Navtex Station; · Ability To Edit And Use The Navtex Station Used-defined List; · Ability To Save And Use Navtex Message Templates. 37. “intercom” Panel. To Monitor Intercom Communication, Execute Voice Messages From The Instructor's Side. 38. Vhf Radio Station Module. To Monitor Vhf Communication, Send Voice Messages From The Instructor’s Side, Play Pre-recorded *.wav Files. 39. Coastal Radio Station Module. Screen Layout: 40. Use Of The Mouse Wheel For Chart Centering And Scaling; 41. On-screen Display Of Mooring Walls And Piers; 42. On-screen Display Of Actual Contours Of Any Ship; 43. On-screen Display Of The Object’s Route Line And Its Actual Track; 44. On-screen Display Of The True And Relative Speed Vectors; 45. Selectable Display Mode: True Motion, Relative Motion, Course Up Or North Up; 46. Display Of Prompt And Other Information In The Status Bar: · Bearing And Distance From The Current Cursor On-chart Position To The Reference Point; · Coordinates Of The Current Cursor On-chart Position; · Depth In The Current Cursor Position; · Current Exercise Time (absolute And Relative). 47. Displaying Of Object Tracks: Contour Or Point With Selectable Resolution, Track History And Time Stamp; 48. Displaying Of Walls And Piers; 49. Use Of A Mouse Wheel For Chart Centering And Scaling; 50. User Configurable Workplace; 51. Different Panels For The Control And Monitoring Of The Exercise Fulfillment: · Reports Panel – To Form And Print Exercise Fulfillment Reports; · Ship Info Panel – To Display Courses, Longitudinal And Transverse Speeds, Rates Of Turn For All The Ships Involved In The Exercise. · Evaluation And Assessment Module Panel; · Target Panel – To Control Vessel Target And Flight And Sar Objects; · Objects Panel – To Promptly Select An Object On The Chart From The List Of All The Objects Available In The Exercise; · Flags Panel – To Hoist/lower Ics Flag Signals On Any Of The Ships, Including Ability To Set And Keep Flag Templates · Events Panel – For The Automatic Recording Of Any Important Events Related To The Incorrect Trainee Actions; · Flash Light Panel – To Send Light Signals From Target Vessels, Including Automated Translation Into Morse Code; · Magnetic Deviation Panel – To Configure The Magnetic Deviation Panel For The Vessels, Participating In The Exercise, Save The Panel And Apply Desired Template To Any Own Vessel, Print The Magnetic Deviation Table; · Procedural Alarms Panel – For Defining User Set Of Alarm For Dedicated Vessels. 52. Setting Navigational Equipment Parameters And Faults: Radar, Gps, Loran C, Log, Gyro, Echo Sounder, Uais; 53. Setting The Exercise Weather And Bathymetric Conditions: Global And Local Zones, Import Of Tide And Current Databases; 54. Observing Own Ships And Targets On The Chart: Ship Info Panel, Cpatcpa Panel, Events Panel; 55. Control Of Own Ships And Targets On The Chart: Direct Control Of Steering And Propulsion Systems, Autopilot, Mooring Lines, Anchors; 56. Setting Faults Of Navigational Equipment, Steering And Propulsion System, Fire And General Alarms; 57. Continuous Data Logging During Exercises; 58. Playback Of Recorded Exercises In Real And Fast-time Modes; 59. Performing Preliminary Exercises On The Map To Check Their Suitability For Training On The Simulator; 60. Distress Signals (flare, Smoke Signals, Dye Markers); 61. Adding New Target Ships; 62. Changing Weather Conditions; 63. Moving Buoys, Turning Off Lights On Them And Hiding Them On Both The Visualization System And Radar; 64. Control Of Automatic Tugboats On Commands From The Bridge Or From The Instructor; 65. Generating And Printing Exercise Reports 5.4 Simulator Scenario Development Station 1. The Simulator Scenario Development Station Shall Be Integrated With All Engine Stations And Instructor Stations, And Can Act As An Instructor Station Capable Of Deploying Scenarios To Other Stations (bridge And Engine) 2. The Simulator Scenario Development Station Shall Have The Same Software And Control Capabilities As The Instructor Station. (see Section A 5.5.3) B. Full Mission Engine Room Simulator (fmers) And Mini Er Stations’ Features And Applications, Major Components And Engine Room Simulator Performance Standards 1. Major Components The Full Mission Engine Simulators That Can Be Integrated With Bridge Simulators Shall Consist Of The Following Major Components: A. One (1) Full Mission Engine Room Station (class A Configuration) B. Ten (10) Mini Engine Room Stations (class B Configuration) C. One (1) Server Station D. One (1) Instructor Station E. One (1) Simulator Scenario Development Station F. One (1) Briefing/ Debriefing Station 2. Features And Applications 2.1 The Man Electronic Engine Model Simulates A Suez Max Crude Oil Carrier With A Man Slow Speed Turbo Charged Diesel Engine As Propulsion Unit Modeled With Fixed Propeller. The Main Engine Models Respond Dynamically To Variations In Operation And Conditions Of The Ship Model, And The Ship Models Have Mutual Responses To The Main Engine Models. The Model Is Based On Real Engine Data That Makes The Dynamic Behavior Of The Simulator Close To Real Engine Response. In Addition To The Man Engine, The Vessel Has An Electrical Power Plant Including Three 1125 Kva Diesel Generators And One 250 Kva Emergency Generator. The Steam Plant Includes Two D-type Steam Boilers, Based On Alfa Laval And One Composite Boiler (aalborg), 3 Cargo Turbines, Condensing And Feed Water Systems. Control Room Operator Station, Bridge And Steering Panels Are Included. The System Shall Also Be Connected To The High Voltage Engine Simulator. 2.2 The Simulator Models Complies With The Requirements In The Stcw Convention, Regulation 1/12 And Fulfill The Standards Of An Internationally Recognized Classification Society For Maritime Simulator Systems. 2.3 The Engine Model Main Specifications High Fidelity Engine Room Systems Include: - Sea & Lt/ht Fresh Water Systems, Incl. Fw Generator - Electrical Power Plant, Incl. Diesel Generators And Power Management - Start & Service Air Compressors, Incl. Compressor Intermediate Coolers And Emergency Compressor - Integrated Automation System, Incl. Vessel Performance Monitor - Steam Plant Incl. D-type Oil Fired Boilers And Combined Exhaust/oil Fired Boiler - Diesel/heavy Fuel/oil Systems, Incl. Hfo, Lshfo And Mdo Tanks, Separators, Viscometers - Lubricating Oil Systems, Incl. Separator - Stern Tube Systems - Steering Gear - Main Engine Control System (man) - Main Engine Remote Control System (ac 600) - Main Engine Maneuvering System - Main Engine Hydraulic Oil System - Main Engine Hydraulic Cylinder Units System - Cylinder Indication Diagrams - Air Ventilation System - Bilge Wells & Bilge Separator - Sewage Treatment Plant - Incinerator Plant - Inert Gas System - Ballast System - Refrigeration System - Ship Loading System - Fire Detection System - Fire Fighting System - Remote Co2 Release, Emergency Stops And Quick Release Valves - Emission Control System (water Scrubbing And Me Low Nox Mode) 2.4 The Engine Simulator Product Shall Be Able To Address The Following Stcw Competencies And Shall Be Reflected In The Certificate: · Table A-iii/1.1 – Maintain Safe Engineering Watch · Table A-iii/1.3 – Used Of Internal Communication Systems · Table A-iii/1.4 – Operate Main And Auxiliary Machinery And Associated Controls · Table A-iii/1.5 – Operate Fuel, Lubrication, Ballast And Other Pumping Systems And Associated Control Systems · Table A-iii/1.6 – Operate Electrical, Electronic And Control Systems · Table A-iii/1.7 – Maintenance And Repair Of Electrical And Electronic Equipment · Table A-iii/1.11 – Maintain Seaworthiness Of The Ship 2.5 Interface To Engine Room High Voltage System - The Engine Room Model Will Be Interfaced To A Corresponding High Voltage Simulator And Gas Turbine Installed In The Academy. 3. Engine Room Simulator Performance Standards 3.1 Physical Realism The Engine Simulator Stations Shall Have The Following Physical Realism: A. Equipment And Consoles Shall Be Installed, Mounted, And Arranged In A Ship-like Manner B. The Control Room Consoles Shall Include Control And Monitoring Of The Main Engine, Auxiliary Engines And Electrical Power Generation, Steam Boiler, Pump, Compressors And All Other Alarms. C. The Remote Monitoring And Control Systems Shall Be In Compliance With The Functional Requirements Of The Classification Societies For Periodically Unattended Machinery Spaces. D. The Main Engine Remote Control Console Shall Include Command Functions And Status Indication Normally Found On Board Ships. E. The Electric Power Generation Shall Be Under Automatic Or Manual Control. Such System Should Be Able To Constantly Monitor Demand And Supply. When Deviation From Pre-set Limits Arises, The System Should Be Able To Act In Order To Normalize The Situation. The System Shall Also Perform Continuous Control Of The Frequency And Load Sharing. F. The Electric Power Supply System Shall Be Operated Either From The Switchboard Or The Power Management System. - Remote Start/stop Of Auxiliary Diesel Generators - Operation For Shaft Generator - Connect/ Disconnect Of All Generators - Automatic And Priority Selection - Non-essential Systems Trip - Constant Frequency Mode - Different Control Modes Of Load Sharing G. The Main Switchboard Shall Be A Full Scale Model Of A Typical Switchboard, And Comprise The Necessary Controls And Indicators Usually Available Of Real Generators. H. The Remote Control And Automation System Must Include Control Of The Following Equipment: - Me Lubricating Oil Pumps - Me Fresh Water Cooling Pumps - Me Sea Water Cooling Pumps - Me Auxiliary Blowers - Fuel Oil System And Pumps - Air Compressors - Steering Gear Pumps - Fire Pump Each Of The Above Individual Units Shall Allow Manual Start And Stop From The Control Room Consoles. It Shall Also Be Possible To Use Automatic Start And Stop Where Applicable. I. The Alarm Monitoring System Shall Consist Of A Typical Shipboard Alarm System. J. An Alarm Shall Be Announced By Sound And By Flashing Light In The Control Room. K. A Printer Or A Computer In The Engine Room Control Shall Be Used As An Alarm Log And Event Log. L. “dead Man Alarm System” The Simulator Shall Have The Following Additional Requirements For Low Speed Engine: M. The Simulated Engine Room Shall As A Minimum Reflect Typical Machinery Found On Merchant Ships. The Following Main Components Shall Be Simulated And All Necessary Sub-systems Included For A Low Speed Engine: - Main Engine Including Turbocharger System - 2 Auxiliary Diesel Generators - Lubrication Oil Separator - Steering Gear System - Fire Pump - Shaft Generator - Cooling Water System Including Freshwater Generation System - Turbo Generator - Fuel Oil Bunkering System - Fuel Oil Settling And Service Systems - 2 Heavy Fuel Oil Separators - 1 Diesel Oil Separator - Steam Generation Plant Including Exhaust And Oil-fired Boilers - Diesel Oil And Heavy Fuel Oil Supply To Main And Auxiliary Engines - Main Engine Operation From Engine Room, Engine Control Room And Bridge - Turbocharger System - Air Ventilation System For Engine And Control Room - Bilge Water System Including Oily Water Treatment Systems - Stern Tube System - Deck Machinery Applicable To The Ship Model - Ballast System - Sewage Treatment System The Simulator Shall Have The Following Additional Requirements For Medium And High Speed Engine: N. The Simulated Engine Room Shall Consist Of Typical Machinery Found On Merchant Ships. The Following Main Components Shall Be Simulated And All Necessary Sub-systems Included For A Medium And High Speed Engine: - One Or More Main Engines - Main Sw System - 2 Auxiliary Engines - Fuel Oil Tanks - Fuel Oil Separator - Lubrication Oil Separator - Main Engine(s), Including: • Fresh Water System • Lubrication System • Turbocharger System • Me Sw System - Reduction Gear System - Controllable Propeller Pitch Were Applicable - Steam Generation System As Applicable - Freshwater Generator - Bilge Wells And Bilge Separation System - 2 Air Compressors - Steering Gear System - Fire Pump - Electrical Power Plant - Deck Machinery Applicable To The Ship Model - Ballast System - Sewage Treatment System The Simulator Shall At Least Have The Following Additional Requirements For Machinery Spaces: O. The Simulated Machinery Spaces Shall At Least Include One Dedicated Room For This Purpose. P. At Least The Following Main Components Of The Machinery Spaces Shall Be Graphically Presented Or Represented By Mock-ups Or In Realistic Visualization (to Illustrate Physical Presence) In The Simulated Machinery Spaces: - Main Engine - Auxiliary Diesel Generators - Steam Boiler - Fire Pump Q. The Facilities For Local Operation In The Simulated Machinery Spaces Shall Consist Of Local Operating Stations For Each System. Each Station Shall Be Furnished With Start/stop (open/closed) Buttons And Status Lights, Various Numbers Of Pressure -, Temperature Indicators, Etc. The Local Operating Stations Shall At Least Give Means To Operate The Following: - Main Engine (me) - Me Lubricating Oil Systems Including Separator - Me Fresh Water Cooling System - Me Sea Water Cooling System - Me Auxiliary Blowers - 2 Auxiliary Diesel Generators - Steam Boiler - Fuel Oil System (diesel And Heavy Fuel Oil) Including Separator - 2 Air Compressors - Steering Gear System - Bilge Water System - Fire Pump R. All Valves Typically Associated With The Operation Of Above Machinery May Be Operated At The Computer Screen In A 3d Visual Form Or Mouse Operated By The Candidate. S. Internal Communication System. 3.2 Behavioral Realism The Engine Simulator Stations Shall Have The Following Behavioral Realism: A. The Simulator Models Shall Be Able To Replicate The Dynamic Behaviour Of The Machinery Systems And All Its Visual Parameters As Well As The Interactions Between The Sub-systems. B. The Simulator Models Shall Simulate The Engine Room Components With Their Procedures, As Well As Modelled Controller Systems (sensors, Controllers, Actuators, And Valves) Connected To The Processes. C. When Simulating Real Equipment The Behaviour Of Such Simulated Equipment Should Behave As Identical Aw Possible As The Original. Critical Parameters Of The Behaviour Shall Be Documented D. The Simulator Model Shall Make Applicable Controllers Available And Adjustable With Regards To Pid (proportional-integral-derivative Controller) Parameters. E. The Simulator Model Shall Provide Facilities To Allow The Injection And Resetting Of Malfunctions At Appropriate Times During Operation As Necessary. F. It Shall Be Possible To Simulate Change In Seawater Temperature And Demonstrate How This Affects The Complete Simulation Model. G. It Shall Be Possible To Simulate A Change In Air Temperature And Demonstrate How This Affects The Complete Simulation Model. H. The Simulator Shall Have All Heat Exchangers Available And Adjustable With Regards To Their Parameters (heat-transfer Factor, Heat Dissipation Are Etc.) I. The Simulator Shall Make All Pumps Available And Adjustable With Regards To Their Parameters (pump Capacity, Wear, Etc.) J. It Shall Be Possible To Demonstrate Systematically The Tests That Are Made On The Ums (unmanned Machinery Space) Alarm System. K. It Shall Be Possible To Simulate Auto Slow-down And Emergency Shut Down L. It Shall Be Possible To Simulate Safe Methods To Test Inert Gas Generator (ig) Alarms And Control. M. It Shall Be Possible To Simulate Testing Of The 24v D.c. Power Supply To The Navigation, Communication And Engine Room Control Console In Event Of Power Failure. N. It Shall Be Possible To Simulate Safe Method Of Testing The Insulation For Rotor And Stator. O. It Shall Be Possible To Simulate Of Reading A Power Factor Meter With Reference To Four Segments P. It Shall Be Possible To Simulate Testing Of The Devices And Relays Provided For Generator Protection Q. It Shall Be Possible To Simulate Tests Related To Avr (automatic Voltage Regulator) R. It Shall Be Possible To Simulate Methods Of Cooling And Checking Of Air Gap S. It Shall Be Possible To Simulate The Precautionary Measures When Megger Testing The Rotor Of A Brushless Generator T. It Shall Be Possible To Simulate Routine Tests On An Emergency Generator U. It Shall Be Possible To Simulate How A Generator Circuit Breaker Ocr (over Current Relay) Is Set And Tested. V. It Shall Be Possible To Simulate The Process Of Connecting A Shaft Generator On Load And Specific Conditions For Taking Off Load. W. It Shall Be Possible To Simulate The Procedure For Megger Testing A High Voltage System X. It Shall Be Possible To Simulate The Maintenance And Checks Carried Out On An Acb (air Circuit Breaker) Y. It Shall Be Possible To Simulate Recovery From “dead Ship” Condition. Z. It Shall Be Possible To Simulate Methods Test The “preferential Tripping Sequence” Aa. It Shall Be Possible To Simulate Methods To Tests Auto “cut In” Of Stand Fault Bb. It Shall Be Possible To Simulate Methods Of Diagnosing Single Phasing Fault. Cc. It Shall Be Possible To Simulate Operation And Maintenance Of Variable Speed Motor Starters. Dd. It Shall Be Possible To Simulate Operational Test Methods Of Oily Water Separator Monitors Ee. It Shall Be Possible To Simulate Test Methods For Level Alarms And Function Tests Of Bilge Pumping Arrangement Ff. It Shall Be Possible To Simulate The Functional Tests Of Odmcs (oil Discharge Monitoring And Control System) And Odme (oil Discharge Monitoring Equipment) System Gg. It Shall Be Possible To Simulate The Function Test Of Ows (oily Water Separator) And Ppm (parts Per Million) Unit. 3.3 Operating Environment The Engine Simulator Stations Shall Have The Following Operating Environment: A. It Shall Be To Adjust The Noise Level In The Simulated Machinery Spaces Infinite From No Added Noise Up To Minimum 100 Db(a). The Noise Shall Have A Frequency Distribution Typical For Machinery Spaces. Headset Is Provided For Each Workstation. B. It Shall Be Possible To Simulate The Sea Water Temperature At Least Infinite Between +1ºc And +30 ºc C. An Alarm Can Be Heard Through Headset Of A Candidate And By Flashing Light In The Machinery Spaces 4. Hardware Requirements 1 Set 4.1 Full Mission Engine Room Simulator A. Engine Control Room Consoles I. Ecr Pump Compressor And Power Management Console 1. 1 X Console 2. 1 X Computer 3. 2 X 24 Touch Monitors Ii. Ecr2 Alarm, Monitoring And Remote-control Console: 1. 1 X Console 2. 1 X Computer 3. 1 X Keyboard 4. 1 X 24” Touch Monitor 5. 1 X Industrial Tracker Ball Iii. Ecr3 Main Engine Remote Control And Indication Console 1. 2 X Console 2. 1 X Computer 3. 3 X 24” Touch Monitors 4. 1 X Speed Set Lever For Main Engine Remote Control And 5. Indication Console 6. Dead Man Alarm (dma) 7. Engineers Reset 8. Included Power Relay To Which Illumination In Engine Control Room And Engine Room Can Be Connected, Causing Lights In The Rooms To Go Out During A Blackout To Increase Realism. Iv. Simulated Cctv Touch Monitor 1. 1 X Computer 2. 1 X 24 Monitor V. Internal Telephone At The Following Locations 1. Instructors Station 2. Engine Control Room 3. Engine Room 4. Emergency Generator Room Vi. Main Switchboard 1. 14 X Touch Screen Monitors 2. 7 X Computers 3. 1 Set Of Speakers 4. Installed In A Switchboard Manner Vii. Engine Room Equipment 1. 4 Dome Type Virtual Walkthrough 2. 4 X High Resolution Short Throw Projector 3. 4 X Computer With Graphics Card 4. 4 X Controller Viii. Local Operating Station Console 1. 1 X Console 2. 1 X Computer 3. 1 X Keyboard 4. 1 X 24” Touch Monitor 5. 1 X Industrial Tracker Ball Ix. Engine Room Sound 1. 1 X Sub Woofer 2. 4 X Satellite Speaker X. Alarm Horn And Lamp 1. 1 X Column With Lights And Sirens Xi. Emergency Generator Room 1. 1 X Dome Type Virtual Walkthrough 2. 1 X High Resolution Short Throw Projector 3. 1 X Computer With Graphics Card 4. 1 X Controller 5. With Sound System B. All Computers Must Be The Latest Generation This Includes Processors, Memory, Graphics Card And Storage. I. Monitors: Full Hd Resolution Ii. Storage: Solid-state Drive (ssd) Iii. Processor Generation: Must Be From The Latest Generation Of Processors Iv. Graphics: Integrated Graphics Dedicated Gpu If Needed. C. Touchscreens For Durability, Responsiveness, And Multi-touch Support. D. Each Computer Must Be Paired With A Ups Unit Rated For At Least 1.5 Kva And Automatic Voltage Regulation To Handle Voltage Fluctuations. E. The Engine Control Console Must Be Made From Steel W/ Handrails 10 Sets 4.2 Mini Engine Room Simulator A. 1x Computer Specification (minimum Requirement) 1. Intel Core I5 Processor 2. 16 Gb Ram 3. 256 M.2. Ssd 4. Video Card 5. Keyboard/mouse 6. 2x At Least 24" Monitor (touchscreen) 7. Ups 1.5kva A. Surge Protection B. W/ Automatic Voltage Regulator B. 1x Table Size: At Least L 1200 X W 800 X H 750 Mm C. 1x Chairs 1 Set 4.3 Engine Instructor Station A. Instructor Station I. 1x Computer (minimum Requirements) 1. 3x 24” Monitor 2. Intel Core I5 Processor 3. 16 Gb Ram 4. 256 M.2 Ssd 5. Keyboard/mouse 6. Ups 1.5kva A. Surge Protection B. W/ Automatic Voltage Regulator Ii. 1x Speaker 1. Type: Desktop 2. Port: Mini Jack Iii. 1x Steel Cabinet W/ Lock 1. Metal Drawer Office Drawer 2. File Cabinet Storage With Wheel Iv. 1x Smart Tv 55” Tv Led For Cctv V. 1x Printer 1. Laser Printer A4 2. A4 Print Speed Up To 48 Ppm 3. Auto 2-sided (duplex) Printing, 1-line Lcd 4. Wifi, Airprint, Mopria, Wifi Direct, Lan, Usb 2.0 5. Colored Printer Vi. Instructor Station Table Specification: Vii. 11x Two-way Vhf Radiotelephone (walkie-talkie) With Charging Connection Viii. 1x Table Size: At Least L 1700 X W 700 X H 750 Mm 1. Material: Formica Matt Laminate On Chipboard Ix. 1x Ergodynamic Chair X. 1x Document Metal Cabinet With Glass Sliding Door 1. Size: 1850x 400mmx 900mm 2. Door Lock 1 Set 4.4 Engine Simulator Scenario Development Station A. Scenario Development Station As An Instructor Station Capable Of Deploying Scenarios To Other Stations (bridge And Engine) 1. 1x Computer (minimum Requirements) 2. 2x 24” Monitor 3. Intel Core I5 Processor 4. 16 Gb Ram 5. 256 M.2 Ssd 6. Rtx 4070 Or Higher 7. Keyboard/mouse 8. Ups 1.5kva A. Surge Protection B. W/ Automatic Voltage Regulator B. 1x Table Size: At Least L 1200 X W 800 X H 750 Mm I. Material: Formica Matt Laminate On Chipboard Ii. 1x Ergodynamic Chair 5. Software Requirements 5.1 Full Mission Engine Room Simulator 5.2 Mini Engine Room Simulator 5.3 Instructor Station 5.4 Simulator Scenario Development Station 1. The Simulator Scenario Development Station Shall Be Integrated With All Engine Stations And Instructor Stations, And Can Act As An Instructor Station Capable Of Deploying Scenarios To Other Stations (bridge And Engine) 2. The Simulator Scenario Development Station Shall Have The Same Software And Control Capabilities As The Instructor Station. (see Section B 5.5.3) 1 Set C. Briefing/ Debriefing Station For Bridge And Engine A. 2x Computer (minimum Requirements) 1. 1 X Pc 2. Intel Core I5 Processor 3. 16 Gb Ram 4. 500gb Ssd 5. Low Profile Video Card 6. 1x Keyboard/mouse 7. 1x Ups 1kva 8. 1x W/ Computer Table Size: At Least L 1700 X W 700 X H 750 Mm 9. Briefing And Debriefing Rooms With Playback Capability (playing Of Recorded Exercise And Assessment In Simulator B. 50x Chairs C. 1x Solid Round Table (at Least 6100 X 1220 Mm) (for Bridge Briefing/debriefing) I. (metal Legs With Laminate Board Or Solid Wood Table) D. 1x Solid Round Table (at Least 4880 X 1220 Mm) (for Engine Briefing/debriefing) I. (metal Legs With Laminate Board Or Solid Wood Table) E. 1x Smart Tv At Least 70" 4k 1. Wall Mounted. 2. 2x Hdmi 10meters F. 4x Bridge And 4x Engine) Hardware For Virtual Bridge Familiarization (minimum Requirements) 1. Display: A. Type: Lcd B. Resolution: 2064 X 2208 Per Eye C. Refresh Rate: 120 Hz D. Field Of View: E. Horizontal: 97 Degrees F. Vertical: 93 Degrees 2. Processor: A. Chipset: Qualcomm Snapdragon Xr2 Gen 2 3. Ram: 12gb 4. Storage: A. Options: 128gb, 256gb, And 512gb Variants 5. Audio: 6. Hand Tracking: Improved Hand Tracking Capability 7. Controllers: A. Type: Meta Touch Pro Controllers B. Features: Haptic Feedback, Improved Ergonomics, Rechargeable Batteries 8. Battery: A. Headset: Approximately 2-3 Hours Of Active Use B. Charging: Usb-c Fast Charging 9. Connectivity: A. Wireless: Wi-fi 6e Support B. Bluetooth: 5.2 10. Inclusions: A. Headset B. Touch Pro Controllers (pair) C. Charging Cable (usb-c) D. Power Adapter W/ Extra 1 Battery Each E. Controller Lanyards F. Glasses Spacer Ii. Add On’s: 1. 2x Strap With Battery 2. 8x Silicone Cover Face Cover 3. 4x Silicone Protective Case 4. 8x Silicone Case For Controller 5. 3 Row Vr Storage Cabinet With Lock G. The Virtual Reality Bridge Must Be Complete With Hotspots, Identification Tags And Descriptions. It Shall Also Be Available On An Offline System, Navigable. H. Playback Capability With The Following Functions: · Loading A Previously Created Exercise On A Chart Or In Engine Room; · Playing The Exercise To Explain The Task; · Uploading A Sample Log Of The Same Exercise To Explain The Correct Actions. I. Virtual Bridge Familiarization W/ Virtual Reality Device The Vr System Aims To Simulate The Overhauling Process, Enabling Immersive, Hands-on Learning And Pre-assessment Without Direct Physical Intervention On The Engine. This Approach Will Enhance Technical Skills, Reduce Risk, And Improve Efficiency In Real-world Engine Maintenance And Overhauling. The Supplier Shall Provide A Virtual Bridge And Engine With The Use Of Virtual Reality Providing The Following Visualizations: 1. Bridge Wing Equipment 2. Speaker Mic 3. Rate Of Turn 4. Engine Rpm 5. Quick Release Lifebouy 6. Remote Panel 7. Gyro Compass Repeater 8. Fire Box 9. Hatch For Maintenance 10. Thermometer Ii. Main Bridge 1. Epirb 2. Sart 3. Clear View Screen 4. Location Of Fire Extinguishers 5. Pantry With Equipment 6. Pilot Chair 7. Smoke Detectors 8. Damage Control Plans 9. Radar 1 And 2 And 3 10. Gps With Other Equipment 11. Helm Wheel 12. Indicator Control 13. Deck Light Control 14. Admiralty And Other Maritime Publications 15. Fireplan 16. Rudder Angle Indicator 17. Voice Recorder 18. Whistle Horn 19. Water Tight Door Indicators 20. Window Wipers 21. Pa Systems 22. Cargo Hold Fan Control 23. Smoke Alarm System 24. Fire Alarm System 25. General Alarm System 26. Vhf System 27. Log Books And Other Documentation 28. Ecdis Voyage Planner 29. Pressure Recorder 30. Portable Uhfs 31. Lifejackets, Rocket Flare, And Rocket Line 32. Location Of Immersion Suits 33. Barometer 34. Utc Clock 35. Radio Room Configuration 36. Posters 37. Charts 38. Compass Deck / Monkey Island 39. Radar Equipment 40. Antennas 41. Anemometer 42. And Other Equipment On The Monkey Bridge Iii. The Me-b Main Engine Vr Overhauling System Cover The Following Features Full-scale, Interactive Models Allowing For A Detailed Exploration Of All Engine Components, Including: Iv. Connection Rod & Crosshead Assembly V. Stuffing Box Assembly Vi. Piston Assembly Vii. Cylinder Liner Assembly Viii. Cylinder Cover Assembly Ix. Exhaust Valve Assembly X. The Vr Simulation Guides Users Through Disassembling, Inspecting, And Reassembling The Exhaust Valve, Focusing On Critical Tasks Like Checking Valve Seats, Spindle Condition, And Wear On Sealing Surfaces. Users Can Also Simulate Tasks Such As Lapping The Valve, Inspecting Hydraulic Actuators, And Ensuring Proper Seating Of The Valve During Reassembly. 1 Set D. Server Station For Bridge And Engine A. 2x Set Computer (minimum Requirements) 1. Intel Core I5 Processor 2. 16 Gb Ram 3. 4x 500 Ssd 4. Keyboard/mouse 5. License Operating System B. 1x Nas And Exercise Server 1. 4 Bay Nas Disk Station Quadcore Processor 2. 4x 4 Tb Hdd C. 1x Server Rack 1. Server Rack At Least 32u 2. W/ Fan D. 1x Ups 1. 5kva (5kw) 2. Sealed Lead-acid (sla) Or Lithium-ion 3. Output Voltage: 230v Ac 4. Surge Protection 5. Stabilizes Incoming Voltage Without Switching To Battery Mode 25 Sets E. Cloud Simulator-ready Computers A. Laptop 1. 13th Gen Intel Core I5-1335u 2. 16 Gb, 2 X 8 Gb, Ddr4. 2666 Mhz 3. 512 Gb, M2, Pcie Nvme, Ssd 4. Intel Iris Xe Graphics 5. Windows 11 Pro License 6. Wi-fi 6 Wireless Lan And Bluetooth 7. Keyboard With Numeric Keypad 8. 15.6", Fhd 1920x1080, 120hz, Wva, Non-touch, Anti-glare, 250 Nit, Narrow Border, Led-backlit 9. Ports: Usb 2.0, Headset Jack, Power Jack,hdmi 1.4, Usb 3.2 Gen 1 Type-a, Usb 3.2 Gen 1 Type-c™ 10. Power Adapter: 220v Ac Input, 65w 11. Accessories: Wireless Mouse 1 Set F. Network And Cctv A. 1 X High Speed Router For Remote Support B. Network Switch 1. Network Switch Specifications Manage: 2. 4x 24 Ports 10/100/1000mbps Rj45 Ports 3. 1x 8 Ports 10/100/1000mbps Rj45 Ports C. Set Cctv Monitoring 1. 1x Nvr At Least 32 Channel 2. 20x 6 Mp Fixed Dome Network Camera With Mic 3. 3x 6tb Storage (design For Cctv) D. Network Requirements: I. 72x Lan Port Ii. 1x Lot: Of Upvc, Conduit, Pull Box, Fittings, Hanger, And Support And Other Materials If Needed. Including Utp Cat6 Shielded Pure Copper, Fiber Optic Cable, Patch Panels. Iii. Installation, Engineering Labor For Entire Project. Iv. Cable Laying, Labeling, Harnessing V. Mobilization And Di-mobilization Vi. All Cabling Will Be Endpoint At Server Room (back Of Full Mission Bridge Simulator) E. Structured Cabling Systems Standard I. Stations Must Include Lan Outlets And Patch Cords. Ii. Backbone Cabling Will Be Using The Cable Tray For Lan Distribution. Iii. Lan Outlets Must Have Network Labeling Iv. Patch Panels Are Required G. Civil Works A. Program Of Work Separate Documents (attached) Part Ii. Other General Requirements 1 Ea. Project Billboard/signboard 1 L.s Occupational Safety And Health Program 1 L.s Mobilization/demobilization Part Iii. Civil, Mechanical, Electrical, & Sanitary/plumbing Works Part A. Earthworks 1 L.s Removal Of Structures And Obstruction Part C. Finishings And Other Civil Works 179.71 M² Wall, Metal Frame, Fiber Cement Board 6mm 37.92 M² Tempered Glass Door, 12mm, Reflective 23.04 M² Aluminum Glass Window 4.05 M² Doors, Solid Panel 406.28 M² Acoustical Ceiling Panel 745.2 M² Painting Works, Masonry/concrete 4.05 M² Painting Works, Wood 48.38 M² 150mm Chb Nonload Bearing(including Reinforcing Steel) 48.38 M² Plain Cement Plaster Finish 116 M² Floor Tiles, Imo Rubber, On Finish Floor 211.6 M² Floor Tiles, Imo Rubber, On Raised Floor System Part D. Electrical 1 L.s Panelboard With Main And Branch Breakers 1 L.s Wires And Wiring Devices 1 L.s Lighting Fixtures And Lamps 1 L.s Conduit, Boxes, And Fittings 1 L.s Pole Mounted Power Transformer (oisc) 1 L.s Network Cabling Part E. Mechanical 1 L.s. Door Access And Card Reader System Part F. Simulator Equipment 1 L.s Airconditioning, Package/split Type H. Terms And Conditions 1. A 3-year Warranty For The Computer Hardware And Console Peripherals 2. All Workstations Shall Have Imo Standard Rubber Mat Flooring. 3. The Software Comes With A 3-year Warranty Inclusive Of New Updates. 4. The Project Will Be Implemented Within 150 Cd. Liquidating Damages Will Be Applicable For Any Delays. 5. A Comprehensive Guide Will Be Provided, Offering Detailed Instructions On System Operation And Maintenance Activities, Facilitating Ease Of Use And System Upkeep. 6. Onsite Training Sessions Will Be Conducted By Certified Instructors And Technical Experts, Facilitating Smooth Knowledge Transfer And Ensuring Proficient System Operation. Certificates Will Be Provided Upon Completion Of Training Sessions. 7. Structured Cabling Standards To Establish A Reliable And Efficient Network Infrastructure. 8. The Simulator Manufacturer Should Be An Iso 9001:2015 And Iso 14001:2015 Certified Business. 9. The Simulator Should Be Certified By An Internationally Recognized Classification Society And May Also Be Certified By National Authorities. 10. The Software Must Be Perpetual License. 11. The Supplier Shall Conduct An Annual Face-to-face Maintenance Session To Ensure The System's Optimal Functionality And Performance. 12. The Supplier Must Resolve Any Software Or Hardware Issues Within 2 To 5 Cd Of Their Occurrence To Minimize Downtime And Disruptions. 13. All Hardware Installations Must Adhere To Software Specifications To Guarantee Seamless Integration And Operation. 14. The Computer Hardware Supplied Must Be Sourced From Proven Technology Hardware Companies, Quality And Performance Standards To Ensure Optimal Functionality And Compatibility With The Software. 15. Bidders Are Required To Offer Continuous Retraining Sessions Free Of Charge During The Warranty Period To Ensure Users' Proficiency With The System. 16. Bidders Should Provide Manufacturer Authorization Or Exclusivity Certificate To Ensure The Authenticity And Legality Of The Supplied Products. 17. The Bidder Is Responsible For Performing A Thorough Site Inspection, And A Site Inspection Certificate Issued By The Agency Shall Be Submitted As Part Of The Eligibility Requirements. 18. The Bridge Simulator Shall Be Integrated With The Engine Simulator Ensuring Compatibility And Functionality. 19. All Simulator Stations Can Connect And Enable Them To Interact With Each Other In A Coordinated Scenario. 20. The Simulator Scenario Development Station Shall Be Capable Same As An Instructor Station Capable Of Deploying Scenarios To Other Stations. 21. All Other Simulator Specifications And Capabilities Not Indicated Herein, The Simulator Shall Comply With The Simulator Performance Standards As Required In Maritime Industry Authority (marina) Evaluation Instrument For Full Mission Bridge And Engine Simulator. 22. The Bidders Should Provide A Breakdown Of The Unit Prices Of The Major Components In The Original Of Duly Signed And Accomplished Price Schedule(s) Under Financial Component Envelope Upon Bid Submission. Furthermore, They Should Provide A More Detailed Breakdown As A Condition For Issuance Of Notice To Proceed. ~~~~nothing Follows~~~~

Details: Description 1. Camera With Lens - Actual: 25.3 Megapixel*bionz X Image Processor & Front-end Lsi*693-point Hybrid Af System*uhd 4k30p Video With Hlg & S-log3 Gammas*2.36m-dot Tru-finder Oled Evf*3.0″ 922k-dot Tilting Touchscreen Lcd*5-axis Steadyshot Inside Stabilization*iso 204800 And 10 Fps Shooting*built-in Wi-fi And Nfc, Dual Sd Slots*fe 28-70mm F/3.5-5.6 Oss Lens - 4 Units 2. Microphones - For Professional Voice-over Applications *dynamic, Cardioid Pickup Pattern*bass Roll-off And Midrange Controls - 6 Pcs 3. "computer Set -processor: 12 Gen Intel Core I5-12400f (18 Mb Cache, 6 Cores, 12 Threads, 2.50 Ghz To 4.40 Ghz Turbo) Memory: 8 Gb, 1 X 8 Gb, Ddr4, 3200 Mhz Storage: 1 Tb + 256gb M.2 Nvme Pcie Ssd Graphics: Nvidia Geforce Gt730 2gb Gddr5 730 Wired Keyboard And Mouse O.s.: Windows 11 Wireless: Intel Wi-fi 6 2x2 (gig+) And Bluetooth Power: 180 W Bronze Internal Power Supply Unit (psu) / 300 W Bronze Internal Power Supply Unit (psu) , 24"" Fhd Monitor O.s.: Windows 11" - 3 Units 4. All Black 6-input Audio Recorder - Zoom H6 All Black 6-input / 6-track Portable Handy Recorder With Single Mic Capsule (black)*h6 All Black X/y Microphone Capsule 84 X Aa Batteries*set Of Download Codes For Cubase Le And Wavelab Le - 2 Units 5. Hs8 Studio Monitors - Specifications - Hs8 2-way Bass-reflex Bi-amplified Nearfield Studio Monitor With 8" Cone Woofer And 1" Dome Tweeter. • 38hz - 30khz (-10db), 47hz - 24khz (-3db) Frequency Response • 75w Lf Plus 45w Hf Bi-amp System For High-performance 120w Power Amplification • Room Control And High Trim Response Controls • Xlr And Trs Phone Jack Inputs Accept Balanced Or Unbalanced Signals - 2 Units 6. 8-channel Mic Preamp With Adat Connectivity - Preamp Type: Solid State*number Of Channels: 8*phantom Power: Yes*sample Rate: Up To 192khz*bit Depth: 24-bit*analog Inputs: 8 X Xlr-1/4" Combo*analog Outputs: 8 X 1/4"*digital Outputs: 2 X Optical Toslink (adat)*clock I/o: In/out *software: Focusrite Red Plug-in Suite, Softube Time & Tone Bundle*rack Spaces: 1u*power Source: Standard Iec Ac Cable*depth: 11.26"*weight: 7.1 Lb - 4 Units 7. Aluminium 4-section Tripod With Xpro Ball Head - Has A Clever 90° Column Mechanism, Housed In The Tripod's Top Casting, That Can Be Quickly Extended In The Vertical Or Horizontal Position. This Means You Won't Have To Disassemble Your Camera And Lose Out On Shooting Time. Compose Your Photos And Videos With More Freedom And Flexibility And Showcase Your Individual Style. - 3 Pcs 8. Rodecaster Pro Podcast Production Studio Audio Mixer - Features:*easy-to-use Integrated Podcast Production Console*records 24-bit/48khz Audio Directly To Microsd Card Or *computer Via Usb*seamlessly Streams Live Shows*4 Class A Mic Preamps*48v Phantom Power*8 Faders To Control Audio Levels*instant Fx Or Music Playback Via 8 Programmable Pads (with Companion App)*echo-free Phone Connectivity Via Either Trrs Or Bluetooth With Automatic Mix-minus*aphex Big Bottom And Aural Exciter Processing Onboard*dimensions: 13.78″ W X 10.83″ D X 3.23″ H Weight: 4.37 Lbs. - 2 Units 9. 3rd Gen Usb Audio Interface - Computer Connectivity: Usb 2.*form Factor: Rackmount*simultaneous I/o: 18 X 20*number Of Preamps: 8*phantom Power: Yes*a/d Resolution: Up To 24-bit/192khz*analog Inputs: 2 X Xlr-1/4" Combo (mic/hi-z), 6 X Xlr-1/4" Combo (mic/line)*analog Outputs: 10 X 1/4" (line Out)*digital Inputs: 1 X Coax (s/pdif), 2 X Optical (adat)*digital Outputs: 1 X Coax (s/pdif), 2 X Optical (adat)*headphones: 2 X 1/4"*midi I/o: In/out*usb: 1 X Type Usb-c*clock I/o: 1 X Word Clock Out*software: Focusrite Control, Ableton Live Lite, Focusrite Red *plug-in Suite, Pro Tools First Creative (does Not Support 3rd Party Plugins)*os Requirements - Mac: Macos 10.12 Or Later*os Requirements - Pc: Windows 7 Sp1 Or Later (scarlett)*windows 10 V1809 Or Later (pro Tools First)*rack Spaces: 1u*power Supply: Standard Iec Ac Cable*height: 1.83"*width: 19.00"*depth: 10.23" - 4 Units 10. Professional Mpk249 49-key Usb Midi Keyboard And Pad Controller With Lcd Screen - 49 Semi-weighted, Full-size Keys With Aftertouch*16 Rgb-illuminated Mpc Pads Each With 4 Banks For 64 Pads*24 Assignable Q-link Controllers Include Knobs, Faders, And Switches (8 Of Each) 8revamped Control Layout With Backlit Lcd Screen*ios Compatibility Using The Apple Ipad Camera Connection Kit (sold Separately)*usb-midi With 5-pin Midi Input & Output*comprehensive Transport And Parameter Controls For Hands-on Daw Integration*mpc Note Repeat, Mpc Swing, And Arpeggiator For Advanced Rhythmic And Melodic Manipulation*mpc Full Level, 16 Levels, Tap Tempo, And Time Division Assist With Dynamics And Tempo*pitch Bend, Modulation, And Octave Controls For Expressive Recording And Performing*1 Assignable Footswitch Jack And 1 Expression Jack*usb Power And Plug-and-play Connectivity - 4 Units

Details: Description 1.the Batangas State University (batstate U) Through The Bids And Awards Committee Invites Interested Firms/supplier To Submit Quotation For The Project "procurement Of Laboratory Equipment And Supplies" With An Approved Budget For The Contract (abc) Sixty-eight Thousand Five Hundred Sixty-two Pesos Only (php 68,562.00). Quotation Received In Excess Of The Abc Shall Be Automatically Rejected At The Opening. Item No. Qty Description Total 1 20 Bottle Alcohol Isopropyl, 70% Alcohol Solution, 250ml Fda Approved 1,600.00 2 6 Bottle Alcohol 70% Pump 1000ml/ 1 Liter 1,800.00 3 10 Unit Analog Multi Tester 14-range, 6-function Tests Ac Voltage, Dc Voltage, Dc Current, Resistance, Continuity And Batteries. Shelf Life: At Least 2 Year, With Certificate Of Calibration Of 1 Year Validity Upon Delivery 15,000.00 4 1 Unit Benedict's Reagent (bls) Benedict's Reagent 720.00 5 1 Bottle Bromothymol Blue Indicator Ph 6.0 (yellow)-ph 7.6 (blue) At Least 250ml Per Bottle W/ Dispensing Cap And 2oz Dropper Bottle Inclusion Waterproof Labels Expiration Date; At Least 2-3 Years Upon Deliver 3,500.00 6 1 Box Disposable Gloves Latex Free Non-sterile Multi-purpose Size: Xl 384.00 7 2 Box Disposable Gloves Latex Free Non-sterile Multi-purpose Size: Xs 768.00 8 10 Box Disposable Mask 50's Per Box Fda Approved 1,200.00 9 12 Kit Dissecting Kit (bls) Stainless Includes: Dissecting Scissors, Thumb Forceps, Scalpel, Needle, Flapper, Magnifier, & Set Of Pins 11,520.00 10 1 Unit Ethanol (bls) 2 Liters 1,500.00 11 1 Box Face Mask N95 Particulate Respirator W/ Cool Flow Valve Pollution Mask Size: Regular Fit Straps – Thermoplastic Elastomer (10pcs/box) Shelf Life: At Least 5 Years 3,000.00 12 8 Box Glass Microscope Slide (bls) Glass Microscope Slide 5,280.00 13 2 Bottle Hydrochlloric Acid N/10 Appearance: Clear Colourless Solution Melting Point: -35°c Boiling Point: 57°c Density: 1.18g/cm³ Vapor Pressure: 125mbar At 20°c Normality 0.099 - 0.101 Molecular Formula: Clh 500 To 650 Ml Per Bottle 1,000.00 14 1 Unit Iodine Solution (bls) Iodine Solution 1,440.00 15 1 Bottle Lugol Lugol's Iodine Solution, Reddish Brown Colored Solution. Iodine Content Of 0.8-1.0%w/v, Physical State At 20degrees C. Storage Temp 15degrees C To 30degreesc Expiration 3-5 Years Upon Delivery, (500ml/bottle) 2,500.00 16 1 Pack Magnetic Stirrer Stir Bar Pivot Ring Around The Center Made Of Ptfe And Quality Magnetic Steel, Chemical Resistant And Corrosion-resistant, Maximum Temperature: 250°c, Minimum Temperature: -196°c, Package Includes 10 Pcs Stir Bars Of Dimension Diameter Of 7 × 20mm, 10 Pcs/pack 2,000.00 17 10 Pack Medical Dropper Glass Dimension: 3cm X 10cm X 3cm Length: 75mm (3 7/8") Graduations: 0.3 To 1ml 6 Pieces/pack 1,000.00 18 1 Roll Parafilm Laboratory Sealing Film Size: 4inx125ft. Gas Permeability (permeabilty Rates Corrected To 760 Mm Pressure) 4,000.00 19 1 Box Pasteur Transfer Pipettes, Plastic 1ml Non-sterile Measurements Marked Up In 0.5ml, 3ml (length:160mm Drop: 48 Ul, 5ml Increments) 500pcs/box 2,500.00 20 1 Unit Spill Kit (biohazard) Inclusions Fluids Absorbed Bodily Fluids Volume Absorbed Per Kit At Least 21g Container Type: Carrying Case Sorbents Included (2) 5 In X 8 In Germicidal (kills Germs) Wipes (3) Bzk Antiseptic Towelettes (3) Disposable Clean-up Towels 21gm Fluid Control Solidifier Pack Ppe Included (2) 1 Pair Exam Quality Vinyl Gloves (2) Disposable Shoe Covers Disposable Gown W/full Sleeves Eye Shield With Ear Loop Mask Additional Components Included (2) 24 In X 24 In Biohazard Bags (2) 8 In X12 In Clear Plastic Bags (2) Twist Ties Biohazard Scoop Bodily Fluid Pick-up Guide 4,000.00 21 5 Box Square Coverslips (bls) 10 X 100mm 500.00 22 5 Box Square Coverslips (bls) 10 X 10mm 1,250.00 23 5 Piece Stirring Rod (bls) 7mm X 12" 600.00 24 1 Box Syringe With Needle 5cc Disposable (3-5 Years Expiration Upon Delivery) 100pcs/box 1,000.00 25 1 Unit Thermometer For Refrigerator/freezer Size: 2.5 Inches Dial Design Accurate From 20 Degree F To 80 Degree F 2-way Bracket Hangs Or Stands With Temperature Zone Indicators (round Type) 500.00 Note: Kindly Indicate The Brand On Your Quotation. 2.philgeps Registration Certificate And Other Business Permits Shall Be Attached Upon Submission Of The Quotation. 3.the Quotation Must Be Submitted (can Also Be Send Email At The Contact Details Listed Below) Or To The Batangas State University Lipa Campus Bgry. Marawoy, Lipa City, Batangas 4217 And Shall Be Received By The Committee On Or Before 5:00 Pm Of November 25, 2024. E-mail: Procurement.lipa@g.batstate-u.edu.ph 4.the Bsu Reserves The Right To Reject Any Or All Quotations And/or Proposals And Waive Any Formalities/informalities Therein And To Accept Such Bids It May Consider As Most Advantageous To The Agency And To The Government. Batstate U Neither Assumes Any Obligation For Whatsoever Losses That May Be Incurred In The Preparation Of Bids, Nor Does It Guarantee That An Award Will Be Made. Ms. Evangeline A. Garcia Head, Procurement Office Batangas State University Lipa Brgy. Marawoy, Lipa City Batangas 4217 (043)779-8400 Loc 3105 / 0917-129-3813

Details: Description Food, Venue And Accommodation For The Training Of Dcp School Recipient Food (1 Breakfast, 2 Snacks, 1 Lunch, And 1 Dinner) With Venue And Accommodation For 185 Participants X P2,000.00 X 3 Days = P1,110,000.00 Technical Specifications For Food: I. Menu Day 0: December 16, 2024 Pm Snack 1 Regular Serving Spaghetti 1 Can Pineapple Juice Dinner 1 Cup Steamed Rice 1 Regular Serving Pork Adobo 1 Pc. Regular Size Banana Day 1: December 17, 2024 Breakfast 1 Cup Steamed Rice 1 Regular Serving Tocino 1 Sunny Side Up Egg 1 Slice Pineapple 1 Cup Of Hot Coffee With Creamer And Sugar Or Chocolate Drink Am Snack 1 Regular Serving Clubhouse Sandwich W/ 10 Pcs. Potato Fries Or Chips 1 Glass Of Cold Lemon Juice Lunch 1 Cup Steamed Rice 1 Regular Serving Chopsuey (no Seafood) 1 Regular Size Roasted Chicken 1 Regular Serving Of Macaroni Salad 1 Regular Serving Of Hot Mushroom Soup Pm Snack 1 Regular Serving Pancit Guisado Slice Bread 1 Can Four Seasons Juice Dinner 1 Cup Steamed Rice 2 Pcs Regular Sized Barbecue 1 Regular Serving Mixed Vegetables (no Seafood) 1 Glass Pineapple Juice Day 2: December 18, 2024 Breakfast 1 Cup Steamed Rice 1 Regular Sized Fried Marinated Bangus W/ Sliced Tomatoes 1 Cup Of Hot Coffee With Creamer And Sugar Or Chocolate Drink Am Snack 1 Regular Serving Carbonara (no Seafood) 1 Glass Of Cold Four Seasons Juice Lunch 1 Cup Steamed Rice 1 Regular Serving Pork Steak 1 Regular Serving Of Sinigang Na Bangus (no Seafood) 1 Regular Serving Of Fruit Salad Pm Snack 1 Regular Serving Champorado 1 Glass Of Cold Calamansi Juice Dinner 1 Cup Steamed Rice 1 Regular Buttered Chicken 1 Regular Serving Mixed Vegetables (no Seafood) 1 Glass Of Cold Pineapple Juice Day 3: December 19, 2024 Breakfast 1 Cup Steamed Rice 2 Regular Sized Longganisa 1 Sunny Side Up Egg 1 Cup Of Hot Coffee Or Chocolate Drink Am Snack 1 Regular Serving Clubhouse Sandwich W/ 10 Pcs. Potato Fries Or Chips 1 Glass Of Cold Pineapple Juice Lunch 1 Cup Steamed Rice 1 Regular Serving Ginataang Kalabasa (no Seafood) 1 Regular Size Cordon Bleu W/ Mixed Veggies 1 Regular Serving Of Buko Salad Ii. Conditions 1. Meal Coverage (3 Breakfast, 3 Am Snacks, 3 Lunch, 3 Pm Snacks, 3 Dinner) For The Participants And Facilitators 2. With Unlimited Coffee, Creamer And Sugar In A Coffee Nook 3. With Water Dispenser And Purified Water. 4. With Sterilized And Properly Cleaned Utensils. 5. With Food Provision To Participants With Food Restrictions. Ten (10) Meals Substitute To The Menu Stated Above (non-pork, Chicken Or Seafood Eaters) 6. No Table Centerpiece 7. With 10 Free Meals For Guests/monitors 8. With Assigned Waiters And Head Waiter During The Event Proper. Technical Specifications For Venue: I. Availability Of Function Rooms 1. One (1) Air Condition Session Hall That Can Accommodate 185 Participants. Arrangement Of Tables And Chairs Must Be Properly Organized. Ii. Location And Site Condition 1. Within Naga City For The Accessibility Of The Participants And Geographical Reason 2. With Access To Main Roads And National Highways 3. With Free Parking Space Within The Venue Iii. Neighborhood Data 1. Sanitation And Health Conditions - Proper Waste Management System Such As Regular Garbage Collection And Sanitary Permit From Appropriate Authority. 2. Police And Fire Station - Proximity To Police And Fire Stations Iv. Venue 1. Structural Conditions: The Foundation Is Made Of Concrete And Structural Steel Materials Or Combination Of Both. 2. Functionality Of Function Room 2.1 Session Room - One (1) Session Hall For The Activity That Can Accommodate 185 Participants. 2.1.1 Arrangement Of Tables And Chairs Must Be Properly Organized. 2.1.2 With 20 Round Tables 10 Chairs Per Table. 2.1.3 With 1 Long Table And 5 Chairs For The Vips And Guest 2.1.4 With 1 Rectangular Table For Secretariat 2.1.5 Front Stage Must Be Free From Obstruction From The View Of The Participants 2.1.6 One (1) Lcd Projector And Wide Screen, Complete Set Of Sound System, 2 Microphones (if Wireless Provision Of Extra Batteries), Splitter Cable For Additional Projector. 2.1.7 One (1) Podium / Lectern For Each Hall 2.1.8 Hotel I.t. Staff On Stand-by In The Session Hall 2.1.9 Unlimited Access To Internet / Wifi And At Least 100 Mbps. 2.1.10 Free Backdrop, Lay Out Approved By The End-user Care Of The Winning Bidder Indicating The Title, Date, Venue And Other Salient Information About The Training. 4 X 8 Ft. Size 2.1.11 Extra Extension Cord That Can Be Used By The Participants 2.2 Light, Ventilation And Air Conditioning - With Uninterrupted Electrical Supply, Fully Air-conditioned Hall 2.3 Space Requirements - 1 Hall That Can Accommodate 185 Participants 3. Room 3.1 - Forty Seven (47) Fully Air-conditioned Twin Sharing Room That Can Accommodate 4 Guest Per Room. (check In Time Is 2pm And Check Out Time 12 Noon) 3.2 - With Hot And Cold Bath 3.3 - Provision Of Toothpaste, Soap, And Other Hygiene Materials 3.4. With Clean Beddings And Towels. 4. Facilities 4.1 Water Supply And Toilet - With Continuous Water Supply, And Accessible And Clean Comfort Rooms 4.2 Lighting System - With Uninterrupted Electrical Supply 4.3. Elevator - With Elevator Going To The Session Hall (if The Hall Is Not On The Ground Floor) 4.4 Fire Escapes - With Fire Escapes, Structure In Compliance With The Standards Provided By The Building Code Of The Philippines 4.5 Fire Fighting Equipment - With Accessible Emergency Exit And Alarm, With Standby Fire Extinguishers And Automatic Sprinklers 4.6 Internet And Telecommunications - Unlimited Access To Internet / Wifi And At Least 100 Mbps. 5. Other Requirements 5.1 Maintenance - Maintain Cleanliness/disinfection Of Hall, Restrooms And Dining Area. 5.2 Attractiveness - With Ambiance That Promotes Learning 5.3 Security- With 24-hour Security Service, Front Desk And Housekeeping Services.

Details: Description Invitation To Bid Goods And Services Lot 1 - No. 24-002 1. The Iloilo State University Of Fisheries Science And Technology-dingle Campus, Its Bids And Awards Committee Through Its Fund 101 Intends To Apply The Sum Of Five Hundred Eighty Thousand Pesos Only (php 580,000.00)) Being The Approved Budget For The Contract (abc) To Payments Under The Project Supply And Delivery Of Various Semi-expendable Furniture And Fixtures (early Procurement Activty-epa). Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. Bidders Should Have Completed A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instruction To Bidders. The Iloilo State University Of Fisheries Science And Technology-dingle Campus Now Invites Contractors For The Hereunder Contract: Name Of Contract : Lot 1 - Supply And Delivery Of Various Semi-expendable Furniture And Fixtures (early Procurement Activity - Epa) Location : Iloilo State University Of Fisheries Science And Technology Dingle Campus, Bgy. San Matias, Dingle, Iloilo Contract Price : Php 580,000.00 Contract Duration : 30cd 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedure Using A Non-discretionary “pass/fail Criterion As Specified In The Implementing Rules And Regulations (irr) Of Ra 9184, Otherwise Known As “government Procurement Act”. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Cooperative And Partnerships Or Organizations With At Least Seventy Five Percent (75%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines. 4. Interested Bidders May Obtain Further Information From Isufst-dingle Campus And Inspect The Bidding Documents At The Address Below From 8:00 Am To 5:00 Pm. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders From November 18, 2024 December 6, 2024 At The Address Below And Upon Payment Of A Non-refundable Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of One Thousand Pesos Only (php 1,000.00). 6. The Iloilo State College Of Fisheries-dingle Campus Will Hold A Pre-bid Conference On November 26, 2024 At Exactly 9:00 O’clock In The Morning At The Conference Room, 2nd Floor Administration Building Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat At The Address Below On Or Before December 9, 2024. All Bids Must Be Accompanied By A Bid Security And Or Bid Securing Declaration In Any Of The Acceptable Forms In The Amount Stated In Itb Clause 18. Bid Opening Shall Be On December 9, 2024 At Exactly 9:00 O’clock In The Morning At The Conference Room, 2nd Floor Administration Building. Bids Will Be Opened In The Presence Of The Bidder’s Representatives Who Choose To Attend At The Address Below. Late Bids Shall Not Be Accepted. 8. The Iloilo State University Of Fisheries Science And Technology-dingle Campus Reserves The Right To Reject Any And All Bids Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Incurring Any Liability To The Affected Bidder Or Bidders. 9. For Inquiries And Further Information Please Contact: Bac Head Secretariat Ma. Annalyn D. Soubiron Isufst- Dingle Campus San Matias, Dingle, Iloilo Tel. No. (033) 33-1591/09488865995 Email: Iscofdingle@yahoo.com Dinglebacprocurementoffice@gmail.com (sgd) Dingras E, Balbona, Ddm-lg Chairperson, Bids And Awards Committee Lot 1 - Supply And Delivery Of Various Furniture And Fixtures - Early Procurement Activity (epa) No. Qty. Unit Particular 1. 10 Unit Industrial Fan, 24" Wall Type 2. 500 Pcs Monobloc Chair, Gray, Heavy Duty 3. 2 Unit Rustrum -lectern Glass With School, Logo Dimension: Base Flatform:2.2ftx.61.3inches Height: 3.9ft.x110.3 Inches,top Base Flatform: 61 Inches X 2ft Combination Of Wood And Glass 4. 2 Unit Full Glass Cabinet Swing, Metal Cabinet, With 5 Layer, Adjustable Shelves With Full Glass Swing Door Power Coated Light Gray Dimension: H1859xw900xd400 Invitation To Bid Goods And Services Lot 2 - No. 24-003 1. The Iloilo State University Of Fisheries Science And Technology-dingle Campus, Its Bids And Awards Committee Through Its Fund 101 Intends To Apply The Sum Of Two Hundred Forty-five Thousand Pesos Only (php 245,000.00) Being The Approved Budget For The Contract (abc) To Payments Under The Project Supply And Delivery Of Various Office Supplies And Consumables (early Procurement Activity- Epa). Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. Bidders Should Have Completed A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instruction To Bidders. The Iloilo State University Of Fisheries Science And Technology-dingle Campus Now Invites Contractors For The Hereunder Contract: Name Of Contract : Lot 2 - Supply And Delivery Of Various Office Supplies And Consumables Early Procurement Activity -epa Location : Iloilo State University Of Fisheries Science And Technology Dingle Campus, Bgy. San Matias, Dingle, Iloilo Contract Price : Php 245,000.00 Contract Duration : 30cd 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedure Using A Non-discretionary “pass/fail Criterion As Specified In The Implementing Rules And Regulations (irr) Of Ra 9184, Otherwise Known As “government Procurement Act”. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Cooperative And Partnerships Or Organizations With At Least Seventy Five Percent (75%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines. 4. Interested Bidders May Obtain Further Information From Isufst-dingle Campus And Inspect The Bidding Documents At The Address Below From 8:00 Am To 5:00 Pm. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders From November 18, 2024 December 6, 2024 At The Address Below And Upon Payment Of A Non-refundable Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Five Hundred Pesos Only (php 500.00). 6. The Iloilo State College Of Fisheries-dingle Campus Will Hold A Pre-bid Conference On November 26, 2024 At Exactly 9:00 O’clock In The Morning At The Conference Room, 2nd Floor Administration Building Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat At The Address Below On Or Before December 9, 2024. All Bids Must Be Accompanied By A Bid Security And Or Bid Securing Declaration In Any Of The Acceptable Forms In The Amount Stated In Itb Clause 18. Bid Opening Shall Be On December 9, 2024 At Exactly 11:00 O’clock In The Morning At The Conference Room, 2nd Floor Administration Building. Bids Will Be Opened In The Presence Of The Bidder’s Representatives Who Choose To Attend At The Address Below. Late Bids Shall Not Be Accepted. 8. The Iloilo State University Of Fisheries Science And Technology-dingle Campus Reserves The Right To Reject Any And All Bids Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Incurring Any Liability To The Affected Bidder Or Bidders. 9. For Inquiries And Further Information Please Contact: Bac Head Secretariat Ma. Annalyn D. Soubiron Isufst- Dingle Campus San Matias, Dingle, Iloilo Tel. No. (033) 33-1591/09488865995 Email: Iscofdingle@yahoo.com Dinglebacprocurementoffice@gmail.com (sgd) Dingras E, Balbona, Ddm-lg Chairperson, Bids And Awards Committee Lot 2 - Supply And Delivery Of Various Office Supplies And Materials - Early Procurement Activity (epa) 1. 120 Piece 2 Ring Binder Folder H-9, W-15, Blue 2. 60 Piece Ballpen (black) 3. 60 Piece Ballpen (blue) 4. 50 Piece Battery, Aa 5. 120 Ream Bookpaper (sub. 20, Long) 6. 100 Ream Bookpaper (sub. 20, A4) 7. 20 Ream Bookpaper (sub. 20, Short) 8. 300 Piece Brown Envelope (short) 9. 1 50pcs/ 1box Cd, Rewritable 10. 20 Box Clip (backfold,metal: 19mm) 11. 20 Box Clip (backfold,metal: 25mm) 12. 50 Piece Correction Tape 13. 14 Piece Cutter (big, Heavy Duty) 14. 5 Piece Dater 15. 40 Piece Expanded Envelope, Long, Brown 16. 10 Box Fastener (plastic) 17. 500 Pc File Folder, Long, White 18. 40 Pc Filing Box, Blue 19. 30 Pc Filing Box, Red 20. 40 Bot Glue (all Purpose) 21. 2 Btl Ink, Refill, Canon 71 (pgbk) 22. 2 Cart Ink, Refill, Canon Pixma 741 (color) 23. 5 Bottle Ink, Refill, Canon, 790 (black) 24. 5 Bottle Ink, Refill, Canon, 790 (cyan) 25. 5 Bottle Ink, Refill, Canon, 790 (magenta) 26. 5 Bottle Ink, Refill, Canon, 790 (yellow) 27. 30 Btl Ink, Refill, Epson 003 (black) 28. 20 Btl Ink, Refill, Epson 003 (cyan ) 29. 20 Btl Ink, Refill, Epson 003 (magenta) 30. 20 Btl Ink, Refill, Epson 003 (yellow ) 31. 2 Btl Ink, Refill, Epson T664 (black) 32. 3 Pc Mouse ( Optical, Usb Connection Type ) 33. 10 Pad Note Pad (stick On, 50mm X 76mm ) 2x3 34. 10 Pad Note Pad (stick On, 76mm X 100mm) 3x4 35. 30 Box Paper Clip (32mm Min) 36. 30 Box Paper Clip (50mm Min) 37. 40 Pc Pencil (lead, W/ Eraser) 38. 2 Piece Pencil Sharpener (manual) 39. 10 Piece Plastic Envelope, With Zipper And Handle 40. 500 Piece Pressboard Folder, Long, Green 41. 20 Piece Record Book (300 Leaves) 42. 20 Piece Ring Binder (½") 43. 20 Piece Ring Binder (¾") 44. 20 Piece Ring Binder (1") 45. 5 Piece Ruler (plastic, 12") 46. 5 Pair Scissors, 8"-9" 47. 30 Piece Sign Pen (0.4, Black) 48. 30 Piece Sign Pen (0.4, Blue) 49. 20 Piece Sign Pen Refill, (0.4, Black) 50. 20 Piece Sign Pen Refill, (0.4, Blue) 51. 4 Piece Stamp Pad Felt (60mm X 100mm) 52. 4 Piece Staple Remover (plier-type) 53. 20 Box Staple Wire (#35) 54. 4 Piece Stapler (#35) 55. 30 Pack Sticker Paper 56. 25 Roll Tape (double-sided, 24mm) 57. 3 Roll Tape (duct Tape) 58. 20 Pack Tape (masking, Width:24mm) 59. 10 Roll Tape (masking, Width: 48mm) 60. 2 Roll Tape (packaging, Width: 48mm) 61. 60 Roll Tape (transparent, Width: 24mm) 62. 5 Roll Tape (transparent, Width: 48mm) 63. 30 Pack Vellum Board, Long 64. 30 Piece Whiteboard Pen (black, Refillable) 65. 30 Piece Whiteboard Pen (blue, Refillable)

Details: Description Item No. Quantity Unit Description 1 20.00 Bottles 0.3% Na Chloride 2 5,000.00 Tablet Albendazole 400mg/tab 3 2.00 Pieces Adjustable Cervical Collar Neck Brace Traction Device Breathable Neck Support (adult) 4 2.00 Pieces Adjustable Cervical Collar Neck Brace Traction Device Breathable Neck Support (pedia) 5 2.00 Pieces Adjustable Retractable Tourniquet 6 200.00 Tablets Aluminum Hydroxide 200mg+magnesium Hydroxide 200mg/tab (maalox) 7 300.00 Bottles Ambroxol Hcl 30mg/5ml 8 250.00 Bottles Ambroxol Hcl 6mg/ml (drops) 9 1.00 Unit Ambubag (adult) 10 1.00 Unit Ambubag (infant) 11 1.00 Unit Ambubag (pedia) 12 1.00 Unit Ambulance Strecher Convertible Chair Type 13 6,000.00 Tablets Amlodipine 10mg/tab 14 5,339.00 Tablet Amlodipine 5mg/tab 15 100.00 Bottles Amoxicillin 100mg/ml, Drops 16 300.00 Bottle Amoxicillin 100mg/ml,drops,10ml/bot 17 150.00 Bottle Amoxicillin 125mg/5ml,susp.60ml/bot 18 100.00 Bottles Amoxicillin 250mg/5ml 19 300.00 Bottle Amoxicillin 250mg/5ml,sups. 60ml/bot 20 2,420.00 Capsules Amoxicillin 250mg/cap 21 3,900.00 Capsule Amoxicillin 500mg/cap 22 2,000.00 Tablet Ascorbic Acid 500mg/tab 23 20.00 Boxes Ascorbic Acid 500mgf/tab 24 250.00 Bottles Ascorbic Acid, Drops 15ml 25 350.00 Bottles Ascorbic Acid, Syrup 60ml 26 3.00 Pieces Asepto Irrigation Bulb Syringe 27 1.00 Gallon Betadine Soln. 28 500.00 Tablet Betahistine 16mg/tab 29 200.00 Tube Betamethasone Cream 0.1% 5g 30 20.00 Tubes Betamethasone Ointment 5g 31 4.00 Units Bp Apparatus With Stetoscope (baxtel) 32 100.00 Bottle Carbocisteine 250/5ml 33 2,200.00 Capsules Carbocisteine 500mg/cap 34 200.00 Bottle Cefalexin 100mg/ml Drops 35 250.00 Bottle Cefalexin 250m/5ml Susp. 36 500.00 Capsule Cefalexin 250mg/cap 37 5,300.00 Capsules Cefalexin 500mg/cap 38 700.00 Tablets Cefuroxime 500mg/tab 39 1,700.00 Capsules Celecoxib 200mg/cap 40 250.00 Bottle Cetirizine 1mg/ml Syr.60ml 41 50.00 Bottles Cetirizine 5mg/5ml 42 3,000.00 Tablet Cetirizine Tab 10mg 43 2.00 Boxes Chromic 3-0 44 50.00 Bottle Ciprofloxacin 0.3% 5ml Eye Drops 45 500.00 Tablet Ciprofloxacin 500mg/tab 46 100.00 Bottle Clarithromycin 125mg/5ml 47 50.00 Bottle Clarithromycin 250mg/5ml 48 500.00 Tablet Clarithromycin 500mg/tab 49 500.00 Tablet Clonidine 150mcg/tab 50 200.00 Tablets Clonidine 150mcg/tab (catapres) 51 136.00 Tablets Clonidine 75mcg/tab (catapres) 52 550.00 Bottles Cloxacillin 250mg/5ml 53 2,500.00 Capsules Cloxacillin 250mg/cap 54 3,000.00 Capsules Cloxacillin 500mg/cap 55 200.00 Bottle Co-amoxiclav 125mg/5ml 56 200.00 Bottle Co-amoxiclav 250mg/5ml 57 700.00 Tablets Coamoxiclav 625mg/tab 58 100.00 Bottle Cotrimoxazole 200mg/40mg/5ml 59 300.00 Tablet Cotrimoxazole 800mg/160mg/tab 60 2.00 Rolls Cotton Roll 61 3.00 Pieces Cpr Breathing Mask Resuscitator Rescue Emergency First Aid Masks 62 20.00 Bottles D5 Lr 1 Liter 63 250.00 Vial Depo Provera (depot-medroxyprogesterone Acetate)dmpa 150mg/ml,1ml Suspension For Injection Vial 64 100.00 Bottle Diphenhydramine 12.5mg/5ml 65 500.00 Capsule Diphenhydramine 50mg/cap 66 25.00 Ampule Diphenhydramine 50mg/ml For Injection 67 100.00 Soft Gel Diphenhydramine 50mg/tab 68 2.00 Boxes Disposable Gloves (large) Thermometer (ear) 69 4.00 Units Disposable Gloves (large) Thermometer (ear) 70 2.00 Boxes Disposable Gloves (medium) 71 100.00 Pioeces Disposable Syringes 23x5ml (terumo) 72 1.00 Unit Ecg300g Portable 3 Channel Ecg Machine Digital 12 Lead Ekg 73 20.00 Pieces Elastic Bandage 3 Inches 74 20.00 Pieces Elastic Bandage 4 Inches 75 3.00 Pieces Emergency Blanket Thermal Mylar Blanket 76 50.00 Tube Erythromycin Eye Ointment 0.5%,3.5g 77 20.00 Bottles Ethyl Alcohol 70% 500ml 78 26.00 Boxes Face Mask 79 125.00 Bottle Ferous Drops 80 5,000.00 Tablet Ferous Tab 81 5,000.00 Tablet Ferous+foilc Acid 82 200.00 Bottle Ferrous Syrup 83 1.00 Unit Fetal Doppler 84 10.00 Pieces First Aid Latex Tourniquet Rubber Emergency Supplies 85 50.00 Inhaler Fluticasone+salmeterol 500micrograms+ 50micrograms X 60 Doses With Appropriate Accompanying Dispenser 86 20.00 Boxes Gauze 4x4 87 4.00 Units Glucometer 88 100.00 Bottles Guiafenesin+salbutamol 1mg/50mg/5ml Syrup 89 3.00 Pieces Hot Water Bag 500ml 90 50.00 Ampule Hydralazine 20mg/ml,1ml Ampule 91 200.00 Tablet Hydrochlorothiazide 25mg/tab 92 200.00 Tablet Hydrochlorothiazide 50mg/tab 93 10.00 Bottles Hydrogen Peroxide 94 100.00 Tablets Hyoscine (buscopan) 10mg/tab 95 700.00 Tablets Ibuprofen 200mg/tab 96 25.00 Pieces Iv Cannula G20 97 25.00 Pieces Iv Cannula G22 98 25.00 Pieces Iv Infusion Set 99 500.00 Boxes Levonorgestrel Ethinylestradiol 150mcg/130, Mcg Film Coated Tablet + Ferous Fumarate 75mg Film Coated Tablet 100 10.00 Bottles Lidocaine 50ml 101 1.00 Unit Littman Classic Stethoscope 102 50.00 Tablets Loperanide 2mg/tab 103 600.00 Tablet Loratadine 10mg/tab 104 11,000.00 Tablets Losartan 50mg/tab 105 50.00 Vial Magnesium Sulfate 250mg/ml, 20ml Solution For Injection 106 1.00 Unit Medical Oxygen Trank Trolley 107 1,200.00 Capsule Mefanamic Acid 500mg/cap 108 950.00 Capsules Mefenamic Acid 250mg/cap 109 6,000.00 Tablet Metformin 500mg/tab 110 500.00 Tabs Methyldopa 500mg/tab 111 1,000.00 Tablet Metoprolol 50mg/tab 112 100.00 Bottle Metronidazole 125mg/5ml 60ml 113 500.00 Tablet Metronidazole 500mg/tab 114 10.00 Pieces Micropore 1 Inch 115 100.00 Tube Mometasone 1mg/g 5g Cream 116 500.00 Tablet Montelukast 10mg/tab 117 1,000.00 Tablet Montelukast 5mg/tab 118 250.00 Bottles Multivitamins Drops 15ml 119 380.00 Bottles Multivitamins Syrup 60ml 120 20.00 Boxes Multivitamins Tab 121 10,000.00 Tablet Multivitamins+iron Tab 122 20.00 Tubes Mupirocin Cream 2% X 5g 123 100.00 Tube Mupirocin Ointment 2% X 5g 124 600.00 Tablets N-acetylcystein 600mg/tablet 125 2,200.00 Tablets Omeprazole 40mg/tab 126 500.00 Boxes Oral Contraceptive Pills (exluton 500mcg)for Lactating 127 400.00 Sachet Oresol 128 400.00 Pieces Oresol Sachet 129 1.00 Unit Oxygen Tank 50lbs. Witrh Oxygen Regulator 130 40.00 Boxes Oxytocin 131 600.00 Bottles Paracetamol 100mg/ml, Drops 132 450.00 Bottles Paracetamol 250mg/5ml, Syrup 133 500.00 Tablet Paracetamol 300 Mg/tab 134 2,000.00 Tablets Paracetamol 500mg/tab 135 100.00 Bottles Pedialyte Medium 136 100.00 Ampule Phytomenadione (vitamin K1) 10mg/ml Solution For Injection 137 50.00 Bottle Prednisone 10mg/5ml Suspension 60ml 138 500.00 Tablet Prednisone 10mg/tab 139 4.00 Units Pulse Oximeter 140 3,500.00 Capsule Rertinol Palmitate (vitamin A)100,000iu Softgel Capsule 141 2,500.00 Capsule Rertinol Palmitate (vitamin A)200,000iu Softgel Capsule 142 3.00 Pieces Reusable Male Urinal With Cap 143 50.00 Inhaler Salbutamol 100 Micrograms/dose X 200 Doses 144 350.00 Nebule Salbutamol 1mg/ml,2.5ml For Nebuization 145 50.00 Bottle Salbutamol 2mg/5ml 146 300.00 Bottle Salbutamol+guaifenesin 1mg/50mg/5ml 147 1,200.00 Tablets Salbutamol+guaifenesin 2mg/100mg/tab 148 100.00 Nebule Salbutamol+ipratropium 500mcg+2.5mgx2.5ml 149 120.00 Tubes Silaver Sulfadiazine Ointment 1% X 20g 150 1.00 Box Silk 3-0 151 500.00 Tablet Simvastatin 20mg/tab 152 2.00 Pieces Spine Board Straps (spider Straps) 153 3.00 Pieces Stainless Steel Battery Operated Diagnostic Penlight 154 200.00 Pieces Surgical Gloves Size 6.0 155 200.00 Pieces Surgical Gloves Size 7.5 156 1.00 Box Tongue Depressors,sterile 100s 157 500.00 Capsule Tranexamic Acid 500mg/cap 158 25.00 Ampule Tranexamic Acid 500mg/ml Ampule 159 15.00 Pieces Triangular Bandage First Aid Bandage 160 20.00 Boxes Vitamin B 1,6, 12 Tab 161 10,000.00 Tablet Vitamin B1,6,12 Tab 162 1.00 Unit Warsun Candyx Led Headlight 163 1.00 Unit Warsun D6000 High Power Led Flashlight Rechargeable Super Bright 5000 Lumens Handheld Spotlight Searchlight With Usb Output For Emergencies.