Battery Tenders

Purchaser Name: UK Battery Industrialisation Centre | Fpl Cylindrical Cell Assembly

Details: Description 1. The Davao Oriental State University Through The General Appropriations Act Fy 2025 Intends To Apply The Sum Of One Million Four Hundred Forty-five Thousand Peses (p1,445,000.00) Being The Abc To Payments Under The Contract For Procurement Of Other Machinery And Equipment: Supply, Delivery And Installation Of Equipment For Dorsu Administrative And Finance Division (goods2025-epa-06). Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. The Davao Oriental State University, Through The General Appropriations Act Fy 2025 Intends To Apply The Sum Of The Following Items Being The Abc To Payments Under The Contract For Each Lot. Lot 1 Item # Description Abc 1. Document Scanner 955,000.00 2. Photo Scanner 3. 65 Inches Led Smart Tv With Brackets And Accessories 4. Digital Queuing Machine Lot 2 1. Battery Sets For Existing 10kva Ups 490,000.00 Total Abc 1,445,000.00 Bids Received In Excess Of The Abc For Each Lot Shall Be Automatically Rejected At Bid Opening. 2. The Dorsu Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required By Sixty (60) Calendar Days Upon Receipt Of The Notice To Proceed. Bidders Should Have Completed, Within Five (5) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From Dorsu – Bids And Awards Committee Secretariat/procurement Management Office And Inspect The Bidding Documents At The Address Given Below During 8:00 Am To 5:00 Pm Excluding Saturdays And Sundays And Holidays. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On December 26, 2024 To January 15, 2025 From The Given Address And Website(s) Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of: Lot # Abc Amount Of Bidding Documents 1 P 955,000.00 P 1,000.00 2 P 490,000.00 P 500.00 The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees Be Presented In Person Or Through Electronic Means. As An Alternative Option For Payment, Dorsu Accepts Payments Of Bidding Documents Through Bank Payment With The Following Details: Bank Name: Landbank Of The Philippines – Mati Branch Account Name: Dorsu – Igp Account Number: 1022-1027-17 Copy Of Payment Receipt Must Be Emailed To Procurement@dorsu.edu.ph Before The Deadline Of Submission Of Bids. 6. The Dorsu Will Hold A Pre-bid Conference1 On January 3, 2025, 10:00am At Board Room, Dorsu, Guang-guang, Dahican, City Of Mati, Davao Oriental Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Below On Or Before January 15, 2025, 10:00am. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On January 15, 2025, 10:15am At The Given Address Below. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. The Davao Oriental State University Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section S 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders.

Details: Opportunity: lawrence Livermore National Laboratory (llnl), Operated By The Lawrence Livermore National Security (llns), Llc Under Contract No. De-ac52-07na27344 (contract 44) With The U.s. Department Of Energy (doe), Is Offering The Opportunity To Enter Into A Collaboration To Further Develop And Commercialize Its Metalens-enabled Tpp Printing. background: llnl Has Been At The Forefront In Developing Two-photon Polymerization (tpp) Additive Manufacturing (am) Method. In 2018, Llnl Was A Recipient Of A Federal Laboratory Consortium (flc) Award For Their Development Of Femtoprowrite, Which Leverages Tpp. Tpp Is A Laser Light-directed Writing Technique In Which Crosslinking Reactions Initiated By Light Lead To A Change From Liquid To Solid Within A Region That Is Smaller Than The Light Spot. The Method Is Very High Resolution, Capable Of Fabricating Micro- And Nano-scale Features. however, Conventional Tpp Am Printers Have Extremely Slow Printing Speeds With Limited Part Size Since They Utilize A Single Laser Spot Approach Where The Laser Is Directed Through A Conventional Microscope Objective And The 3d Printed Part Is Built By Scanning Within The Resin Material. There Is A Market Need To Maintain The High Sub-micron Printing Resolution Offered By Tpp, While Increasing The Throughput And Dimensions Of The Printed Components. description: llnl Researchers Have Developed A Parallelized Tpp System That Combines Metalens Array And Spatial Light Modulator (slm) To Manipulate The Directed Laser Light, Which Enables High-volume Fabrication Of Nano-architected Structures At Wafer-scale. Instead Of Using A Single Microscope Objective, Llnl’s Approach Uses An Array Of Metalens That The Laser Passes Through With Each Metalens Being Independently Controlled Via A Slm. This Parallelization Of Printing Allows For Large Scale, High Throughput Writing Of Periodic And Non-repeating Patterns That Exceed The Capabilities Of Conventional Tpp Platforms. This Novel Approach Significantly Increases Throughput Without Sacrificing Resolution Or Introducing Stitching Errors. advantages/benefits: 1000x Speed Compared To Currently Available Tpp Printers wafer-scale 100 Nm-resolution free Of Stitching Defects potential Applications: using The Fine Resolution Of Submicron Am, The Technology Can Be Used In A Wide Variety Of Fields To Fabricate Functional Micro- And Nanoscale 3d Structures For Photonic Crystals, Micro-optics, Mechanical Metamaterials, Micro Fluidics, Miniaturized Optics, Flexible Micro-electronics, Micro-electromechanical Systems (mems), On-demand 3d Chip Packaging Solutions, Custom Micro-heatsinks For The Next-generation Semiconductor And High-density 3d Optical Memory. Tpp Can Also Be Used To Produce Architected Materialsfor Energy Solutions (e.g., Battery And Co2 Electrolyzer Electrodes) And Biomedical Engineering (e.g., Neural Probes). development Status: current Stage Of Technology Development: Trl ☐ 0-2 ☒ 3-5 ☐ 5-9 llnl Has Filed For Patent Protection On This Invention. u.s. Patent Application No. 2022/0252761 System And Method For Parallel Two-photon Lithography Using A Metalens Array Published 8/11/2022 llnl Is Seeking Industry Partners With A Demonstrated Ability To Bring Such Inventions To The Market. Moving Critical Technology Beyond The Laboratory To The Commercial World Helps Our Licensees Gain A Competitive Edge In The Marketplace. All Licensing Activities Are Conducted Under Policies Relating To The Strict Nondisclosure Of Company Proprietary Information. please Visit The Ipo Website At Https://ipo.llnl.gov/resources For More Information On Working With Llnl And The Industrial Partnering And Technology Transfer Process. note: This Is Not A Procurement. Companies Interested In Commercializing Llnl's Metalens-enabled Tpp Printing Should Provide An Electronic Or Written Statement Of Interest, Which Includes The Following: company Name And Address. the Name, Address, And Telephone Number Of A Point Of Contact. a Description Of Corporate Expertise And/or Facilities Relevant To Commercializing This Technology. please Provide A Complete Electronic Or Written Statement To Ensure Consideration Of Your Interest In Llnl's Metalens-enabled Tpp Printing. the Subject Heading In An Email Response Should Include The Notice Id And/or The Title Of Llnl’s Technology/business Opportunity And Directed To The Primary And Secondary Point Of Contacts Listed Below. written Responses Should Be Directed To: lawrence Livermore National Laboratory innovation And Partnerships Office p.o. Box 808, L-779 livermore, Ca 94551-0808 attention: Il-13643plus

Details: Description Lot 1 - C-0113-0374-24 Repair Improvement Of Pabx Room, Ground Floor, Main Building I. Carpentry (ceiling) 1 Metal Furring Channel 0.6m X 19mm X 50mm X 5m 22 Pcs 2 Metal Furring 0.6m X 12mm X 38mm X 5m 10 Pcs 3 W-clip 30 Pcs 4 Wall Angle 0.6m X 25mm X 25mm X 2.4m 10 Pcs 5 Blind Rivets 1/8 ꬾ X 1/2" 1000pcs/box 1 Box 6 1" Black Screw, Pointed, 500pcs/bag 3 Bags 7 9mm Thk. 4' X 8' Gypsum Board 7 Pcs 8 Riveter, Good Quality 1 Set Ii. Painting A. Ceiling 9 Flat Latex, White, Pq 2 Gallon 10 Boral Powder, 25kilos/ Bag 1 Bag 11 No.100 Sanding Paper 2 Meters 12 4" Paint Roller W/ Tray 1 Set 13 2" Paint Brush 1 Pc B. Wall 14 Semi Gloss Latex, White Pq 2 Gal 15 Hanza Yellow, Achre Color 1 Pint C. Roof Deck 16 Thoroseal, Water Proofing 2 Gals 17 4" Paint Brush 2 Pcs 18 Steel Brush W/ Handle 2 Pcs Iii. Fabrication Of Wooden Cabinet A. Carpentry 19 3/4 Thick 4' X 8' Marine Plywood 5 Pcs 20 1/4 Thick 4' X 8' Marine Plywood 2 Pcs 21 1/2" X 1" X 10' Wood Edging 15 Pcs 22 Stickwel Glue 1 Qrt 23 2" X 4" X 6' Kd Good Lumber 3 Pcs 24 2" Finishing Nail 1 Kg 25 1 1/2 " Finishing Nail 1 Kg 26 4" Pull Handle Stainless 5 Pcs 27 Drawer Guide 18" Heavy Duty Hydraulic 2 Sets 28 Heavy Duty Drawer Lock 2 Pcs 29 No. 3 Concealed Hinges 2 Pcs B. Painting 30 Flat Enamel 2 Gals 31 Q.d.e Odorless, Water Base 2 Gals 32 Poly Tuff W/ Hardener 1 Qrt 33 Paint Thinner 2 Gals 34 No. 100 Sand Paper 1 Meter 35 No. 280 Sand Paper 3 Pcs 36 Stopa Rags, 6" 1 Kl 37 2"paint Brush 1 Pc 38 Achre Color Hanza Yellow/bulletin Red 2 Pint Iv. Electrical 39 Emergency Light, Rechargeable Twinhead Led, 230v, 60hz, 2heads (24 X 0.60 Watts, Led), 6v, 4.5ah Sealed Lead Acid Battery, External Safety Fuse And Battery Test Switch 1 Unit 40 Recessed Type Led Panel Light, 18 Watts, Daylight, 230v, 60hz, Square Type 15 Sets 41 Duplex Convenience Outlet, Wide Series Parallel Slot, Universal 16a, 250vac 1 Set 42 3.5 Mm² Thhn Electrical Wire, Stranded, Black 1 Box 43 20mm Dia. Pvc Pipe / 3mtr 10 Pcs 44 20mm Elbow Pipe 6 Pcs 45 20mm Adaptor With Locknuts 35 Pcs 46 Utility Box (pvc) 4" X 2" X 2" 5 Pcs 47 Junction Box (pvc) 4" X 2" X 2" 18 Pcs 48 Flexible Hose 1/2" Pvc 20 Meters 49 Electrical Tape, Big, 8' Black Color 5 Pcs 50 One Gang Switch, Wide Series, Parallel Slot, 230 Vac 1 Set 51 Three Gang Switch, Wide Series, Parallel Slot, 230 Vac 1 Set Subtotal Lot 2 - C-0113-0385-24 Improvement Of Storage And Pantry Area At Icc Building, 5th Fl. Ims A. Carpentry Works: 1 Wall Angle 0.6mm X 25mm X 25mm X 2.4m 7 Pcs 2 Metal Furring 0.6mm X 19mm X 38mm X 5m 30 Pcs 3 Carrying Channel 0.6mm X 19mm X 50mm X 5m 7 Pcs 4 Riveter, Heavy Duty, Good Quality 1 Pc 5 Screw Adapter 1 Pc 6 Drill Bit 1/8" ꬾ 10 Pcs 7 Diamond Tile Cutter, Blade 4" ꬾ 1 Pc 8 W-clip 100 Pcs 9 Hardiflex, 4.5mm Thk X 4' X 8' 14 Pcs 10 1" Black Screw, Pointed, 500pcs/box 1 Box 11 Blind Rivets, 1/8 ꬾ X 1/2, 1,000 Pcs/box 2 Boxes 12 Cutting Disc For Metal 5 Pcs B. Masonry Works: 13 Ceramic Floor Tiles 40 X 40 (approved By The End-user, Colored Texture) 145 Pcs 14 Tile Adhesive 5 Bags 15 Cement 15 Bags 16 Sand Bistay 100 Bags 17 Tile Grout, 2kg/bag 3 Bags 18 Empty Sacks For Debris 50 Pcs 19 Cutting Disc, 4" For Tiles, Good Quality 2 Pcs C. Painting Works: 20 Flat Latex Paint, White, Premium Quality 1 Pail 21 Semi-gloss Latex, White, Premium Quality 1 Pail 22 Acri-color, Raw Sienna 1 Qrt 23 Acri-color, Lamp Black 1 Qrt 24 Paint Roller With Tray, 9" 1 Set 25 Paint Brush, 2" 1 Pc 26 Boral Powder 1 Bag 27 Sanding Paper #100 2 Mtrs 28 Sand Paper #280 Waterproof 12 Pcs D. Supply And Delivery Of Steele Shelve 29 Prepainted Metal Shelve W/ Hole Nut & Washer (see Attached Plan) 4 Sets 1.02mm Thk. (gauge 18) 1m X .40m X 1.80cm Assembled Slotted Metal Rack Heavy Duty Standard (gray) E. Electrical Works 30 Panel Light 18watts, Led, M Daylight, 1800lm, 50,000 Hrs, 230vac, 8 Set 60hz, Square Type 31 Duplex Convenience Outlet, Wide Series Parallel Slot, Universal 16a, 250vac 7 Set 32 3.5mm2 Thhn Electrical Wire,, Stranded, Black 2 Box 33 Pvc Pipe 1/2" (orange) 10 Length 34 Pvc Elbow1/2" (orange) 6 Pcs 35 Flexible Hose 1/2" Pvc 100mtrs/roll 1 Roll 36 Junction Box (pvc) 4" X 4" X 2" Orange 12 Pcs 37 Utility Box (pvc) 4" X 4" X 2" Orange 15 Pcs 38 Three Gang Switch W/ Element 1 Set 39 One Gang Switch W/ Element 1 Set 40 Electrical Tape 8" (big) Black 5 Pcs 41 Emergency Lights Two (2) Led Lamps, 220vac, 60hz, Wall Mounted With 2 Unit Complete Accessories Total Amount (php) Please Specify Total Amount In Words (php) "terms And Conditions : " "1. All Entries Must Be Typewritten Or Legibly Written. " 2. Delivery Period Within 20 Working Days Upon Receipt Of The Approved Funded Purchase Order (p.o). Administrative Penalties Pursuant To Sec. 69 Of The Revised Irr-ra 9184 Shall Be Imposed For Non- Delivery Without Valid Reason. "3. Warranty Shall Be For A Mininum Of One (1) Year For Equipment And Three (3) Months For Supplies From Date Of Acceptance " By The End-user. "4. Price Validity Shall Be For A Period Of Sixty (60) Calendar Days. " "5. Philgeps Registration Number And Mayor's Permit Shall Be Attached Upon Submission Of The Quotation. " Dti /sec And Latest Tax Clearance Shall Be Submitted Before The Award Of Purchase Order (p.o.). 6. To Establish Financial Capability, Bidders May Attach/includenin Its Quotation A Commited Line Of Credit (clc) Equivalent To 10% Of The Abc, From A Commercial Or Universal Bank. 7. Bidders Must Qoute For All Of The Items And Shall Submit A Proposal On Each Item And Evaluation And Award Of Contract Will Be Undertaken On A Lump Sum Basis. 8. Any Erasure, Correction Or Alteration Made By The Bidders In Any Of The Items Shall Render The Bid Non-complying, Hence, A Ground For Disqualification. 9. The Dpwh Reserves The Right To Accept Or Reject Any Bid To Annul The Bidding Process, And To Reject " All Bids At Any Time Prior To Contract Award Without Thereby Incurring Any Liability To The Affected Bidder. " "10. Please Indicate The Brand And Model For Each Items Being Offered. " "medmier G. Malig Assistant Secretary For Technical Services And Information Management Service Chairperson, Bac For Goods "

Details: Description Invitation To Bid For Procurement For The Supply And Delivery Of Information And Communication Technology (ict) Equipment 1. The Department Of Agrarian Reform Provincial Office Of Tarlac, Through The Fy 2024 General Appropriations Intends To Apply The Sum Of The Following: Lot Item Ict Equipment Qty Unit Cost Abc I 1 Laptop 6 49,990.00 299,940.00 2 External Hard Drive 14 4,500.00 63,000.00 362,940.00 Ii Document Scanner 11 30,000.00 330,000.00 Iii Tablet 9 19,000.00 171,000.00 Iv 1 Automatic Projector Screen 1 15,000.00 15,000.00 2 Lcd Projector 6 25,000.00 150,000.00 165,000.00 V 1 Camera 1 42,990.00 42,990.00 2 Battery For Camera 2 3,350.00 6,700.00 49,690.00 Vi Drone 1 29,990.00 29,990.00 Vii 1 Information Display Monitor, 70" 1 42,990.00 42,990.00 2 Information Display Monitor, 32" 5 20,000.00 100,000.00 142,990.00 Total 1,251,610.00 Being The Abc To Payments Under The Contract For Each Lot. Bids Received In Excess Of The Abc For Each Lot Shall Be Automatically Rejected At Bid Opening. 2. The Department Of Agrarian Reform Provincial Office Of Tarlac Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required By Within 15 Days After Receipt Of Notice To Proceed. Bidders Should Have Completed, Within Two (2) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From Department Of Agrarian Reform Provincial Office Of Tarlac And Inspect The Bidding Documents At The Address Given Below During Monday – Friday, 8:00 Am – 5:00 Pm. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On December 26, 2024 From The Given Address And Website(s) Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of: Lot Amount Lot I Php 500.00 Lot Ii Php 500.00 Lot Iii Php 500.00 Lot Iv Php 500.00 Lot V Php 500.00 Lot Vi Php 500.00 Lot Vii Php 500.00 The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person Or Through Electronic Means. 6. The Department Of Agrarian Reform Provincial Office Of Tarlac Will Hold A Pre-bid Conference On January 8, 2025, 01:00 Pm At Dar Provincial Office Conference Room Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Below On Or Before January 22, 2025, 12:00 Pm. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On January 22, 2025, 2:00 Pm At The Given Address Below. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. The Department Of Agrarian Reform Provincial Office Of Tarlac Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11. For Further Information, Please Refer To: Noli V. Abella Bac Secretariat, Head Dar Provincial Office Of Tarlac 2nd Fl., Pinaccles Bldg., Matatalaib, Tarlac City +63917-126-3228 Dartarlac.bac@gmail.com 12. You May Visit The Following Websites: For Downloading Of Bidding Documents: Www.philgeps.gov.ph 26 December 2024 Atty. Ferdinand T. Sally Bac Chairperson

Details: Psc Code: 5865 – Electronic Countermeasures, Counter-countermeasures And Quick Reaction Capability Equipment naics Code: 334511 – Countermeasure Sets (e.g., Active Countermeasures, Jamming Equipment) Manufacturing this Sources Sought/ Request For Information (rfi) Notice Is Being Posted In Accordance With (iaw) Dfars 206.302-1(d). Naval Air Warfare Center Aircraft Division (nawcad) Webster Outlying Field (wolf), Combat Integration & Identification Systems Division (tw12) Has A Requirement To Provide Counter-small Unmanned Aircraft System (c-suas) Handheld Countermeasure Capability. The C-suas Handhelds Are Used To Provide Radio Frequency (rf) And Global Positioning Systems (gps) Disruption. This Allows Users To Control Landing Of The C-suas On The Spot, Return To The Operator, Or To The Starting Point. this Rfi Is Issued As Part Of A Procurement Strategy For Theprocurement Of C-suas Handhelds For The Ci&ids Division. As A Part Of This Rfi, Please Provide Information Regarding The Solution’s Below Salient Characteristics: weight: dimensions: power Source battery Type (if Applicable) operating Time: effective Range: global Positioning System (gps)/ Global Navigation Satellite System (glonass) Jamming mean Time Between Failure (mtbf) responses requested Information section 1 Of The Response Shall Provide Administrative Information And Shall Include The Following As A Minimum. organization Name, Mailing Address, Overnight Delivery Address (if Different From Mailing Address), Phone Number, Fax Number, And Name And E-mail Of Designated Point Of Contact. business Type (large Business, Small Business, Small Disadvantaged Business, 8(a)-certified Small Disadvantaged Business, Hub Zone Small Business, Woman-owned Small Business, Very Small Business, Veteran-owned Small Business, Service-disabled Veteran-owned Small Business). section 2 Of The Response Shall Provide Technical Information, And Shall Include The Following As A Minimum. interested Parties Shall Respond With Existing Capabilities Or Products That Meet All Or A Subset Of The Aforementioned Attributes. Reponses That Include Information Detailing Potential Tradeoffs Or Alternative Solutions Is Encouraged. respondents Shall Include Product Specifications And Sketches With Submission. Product Specification And Sketches Are Not Included In The Final Page Count. if Applicable, Respondents Shall Include A List Of Department Of Defense (dod), Department Of Justice (doj) Or Department Of Homeland Security (dohs) Programs Of Record That Currently Employ Their Solution. Include A Sponsor Point Of Contact (poc) For Each Program, With Email Address And Phone Number. the Government Is Interested In Receiving Vendors’ Price Lists For Items They Believe Meet The Need In This Rfi. Supplying Price Data Does Not Imply A Contractual Obligation And Must Be Provided And Marked As Price Data. respondents Should Include A List Of Authorized Distributors. additional Information the Government Is Seeking Industry Input To Assist In Identifying Components That Might Meet The Requirements Described Above. Please Note That The Government Will Not Be Responsible For Any Costs Incurred By Interested Parties Responding To This Rfi. This Is A Request For Information Only. This Rfi Is Issued Solely For Information And Planning Purposes And Does Not Constitute A Solicitation. Iaw Far 15.201(e), Responses To This Notice Are Not Offers And Cannot Be Accepted By The Government To Form A Binding Contract. in Response To This Rfi, Respondents Shall Submit Written Responses, Not-to-exceed Ten Pages In Length Via Electronic Mail. Respondents Should Include Product Specifications With Submission And Proof Of Certifications. Product Specification, Sketches, Or Listings Of Authorized Distributors Do Not To Count As Part Of The Page Count. The Government Is Interested In Receiving Vendors’ Price Lists For Items They Believe Meet The Need In This Rfi. Supplying Price Data Does Not Imply A Contractual Obligation And Must Be Provided As A Separate Document, Marked As Price Data. the Government Does Not Intend To Award A Contract On The Basis Of This Request Or To Otherwise Pay For The Information Solicited. All Information Received In Response To This Rfi Shall Be Safeguarded Adequately From Unauthorized Disclosure Iaw Far 15.207, Handling Proposals And Information. The Government Utilizes Contractor Support Staff (css) For Assisting In All Aspects Of Its Acquisition Process, And Each Of Those Individuals Does Have Signed Non-disclosure Statements On File As Condition Of Their Employment. All Information Received In Response To This Rfi That Is Marked Proprietary Will Be Handled Accordingly. The Government Will Not Be Liable For Or Suffer Any Consequential Damages For Any Proprietary Information Not Properly Identified. Proprietary Information Will Be Safeguarded Iaw The Applicable Government Regulations. failure To Respond To This Rfi Does Not Preclude Participation In Any Future Associated Solicitation That May Be Issued. Information Provided In No Way Binds The Government To Solicit Or Award A Contract. If A Solicitation Is Released, It Will Be Synopsized On The System For Award Management (www.sam.gov). It Is The Potential Vendor’s Responsibility To Monitor This Site For The Release Of Any Follow-on Information. how To Respond . Please Submit Your Response To This Rfi (not To Exceed Ten (10) Pages) With Product Information That Meets All Or A Subset Of The Aforementioned Attributes Via E-mail No Later Than 6 February 2025 To Lauren Clemmens At Lauren.a.clemmens.civ@us.navy.mil.

Details: Description Purchase Of The Following Heavy Equipment And Vehicles, To Wit: 1 Unit Crawler Excavator (1cbm) Specification: Operating Weight(kg): Atleast 21,000 Engine Power (kw/rpm): Altleast 120/1800 Bucket Capacity Cbm): Atleast 1cbm External Dimensions (mm): Atleast 9525*2700*3300 Arm Digging Force (kn): Atleast 90 Bucket Digging Force (kn): Atleast 130 Rotating Speed (r/min): Atleast 0-11 Travel Speed (km/h): Atleast 3.5-5.6 Maximum Digging Height (mm): Atleast 10,000 Maximum Digging Distance (mm): Atleast 9,500 Maximum Digging Depth (mm): Atleast 6,000 Fuel Tank: Atleast 400l Ground Clearance: Atleast 450mm ========================================================= 1 Unit Motor Grader (12 Ft. Blade) Specification: Number Of Cylinders: Atleast 6 Type: 4-cycle, Electronic Injection, Water Cooled Aspiration: Turbocharged, Air-air Intercooled Bore X Stroke: Atleast 100*110mm Displacement: Atleast 5.5l Gross Power: Atleast 110kw@2100rpm Max. Traction: Atleast 70kn Max. Torque: Atleast 650n.m@1200rpm Rated Fuel Consumption: Atleast 220g/kw.h Moldboard Width: Atleast 3600mm Moldboard Height:atleast 600mm Moldboard Thickness: Atleast 15mm Moldboard Tip Angle: Atleast 20-70deg. Moldboard Cutting Depth: Atleast 460mm Max. Tilting Angle (left/right): Atleast +90deg. Standard Operating Weight: Atleast 13,000kg. ========================================================== 1 Unit Road Roller (10 Tons) Specification: Gross Power: Atleast 90w@1800rpm Operating Weight: Atleast 10,000 Kg Number Of Cylinders: Atleast 4 Type: 4-cycle, Direct Injection, Water Cooled Aspiration: Turbocharged Maximum Torque: Atleast 550n.m@1300-1500rpm Rated Fuel Consumption: Atleast 200g/kw.h Fuel Tank: Atleast 220l Hydraulic Oil Tank: Atleast 80l Engine Coolant: Atleast 15l Battery: 2x12v, 120ah Alternator: 28v, 80a Steering Angle: Atleast +35deg. Oscillating Angle: Atleast +12deg. Min. Turning Radius: Atleast 6400mm ============================================= 1 Unit Pick-up Truck M/t (4x4) Specification: Overall Dimensions(mm): At Least 5267x1870x1800 Enginetype: 4-cylinder In-line Blue Power Diesel Engine With Turbo Intercooler, Semi-midship Weight Distribution Engine Displacement (cc): At Least 2989 Maximum Power (ps/rpm): At Least 180/3500 Maximum Torque (nm/rpm): At Least 440/1500-2600 Transmission: At Least 6-speed Mt Wheels And Tires: At Least 265/60 R18 All-terrain, Matte Dark Gray Metallic Wheelbase: At Least 3115mm Ground Clearance: At Least 230mm Gross Vehicle Weight: At Least 2500kg. Fuel Tank Capacity: At Least 66l ================================================================== 1 Unit Van Specification: Overall Dimensions (mm): At Least 5,255x1940x1980 Wheelbase (mm): At Least 3200 Min. Tire Turning Radius (m): At Least 5 Seating Capacity (pax): Atleast 15 Ground Clearance (mm): At Least 165 Displacement (cc): Atleast 2745 Maximum Output (ps/rpm): Atleast 166/3300 Maximum Torque(nm/rpm): Atleast 410/1300-2600 Fuel Tank Capacity: Atleast 70l Transmission: 6-speed Manual Tires/wheels: Atleast 215/70r16c Steel With Full Cap Airconditioner Type: Dual, Front Manual Control Brakes (front/rear): Ventilated Discs/drum ======================================================= Terms And Conditions: 1. Supplier Must Be Located Within The Mindanao Region. 2.supplier Must Have Its Own Functioning Service Center. 3.supplier Must Have Parts Inventory. 4. Appointing Of Sub-service Center Is Not Allowed. 5. Delivery Is Within 90-120 Days Upon Receipt Of Notice To Proceed. 6.warranty Covers From The Date Of Delivery For Major Parts Only For Trucks- 60,000kms Or 1 Year Whichever Comes First For Equipments- 2,000 Hours Or 1 Year Whichever Comes First 7. All Units Must Have A Municipal Logo And Stickers 8. Delivery At Job Site 9. With Tools And Safety Devices 10. With Extra/reserve Tire For Trucks Or Service Vehicle

Details: Description Itb No. 2025 – 02 January 8, 2025 Republic Of The Philippines Province Of Davao Oriental City Of Mati Invitation To Bid Acquisition Of Two (2) Units Tri-wheeler Motor Vehicle Name Of Project 1. The City Government Of Mati, Through The 20% Local Development Fund Intends To Apply The Sum Of Five Hundred Seventy- Thousand Pesos (php570,000.00) Being The Abc To Payments Under The Contract For Acquisition Of Two (2) Units Tri-wheeler Motor Vehicle. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The City Government Of Mati Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required By Thirty (30) Days After The Receipt Of Purchase Order. Bidders Should Have Completed, Within Five (5) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). Quantity Unit Of Issue Item Description 2 Units Tri-wheeler Vehicle Engine Type: Four Stroke, Spark Ignition Engine Bore X Stroke (mm): 67x67 Engine Displacement (cc): 236.2 Cc Max. Net Power: 8.00 Kw @4500 Max. Net Torque: 20.1 N-m @3500 Lubrication: Pressurized Lubrication By Separate Oil Pump Transmission: 4 Forward + 1 Reverse Max. Speed: 60kmph Front Tire Size: 4.5 X 10” Rear Tire Size: 4.5 X 10” Front/rear Brake: Drum / Drum (200) System: 12v Dc Battery: 12v, 32ah Length: 3230mm Width: 1493mm Height: 1818mm Wheel Base: 2125mm Ground Clearance: 180mm Vehicle Kerb Weight: 503kg Gross Vehicle Weight: 990kg Fuel Tank Capacity: 12l Inclusion:  Water Pressure Machine  Water Square Tank  Free 3yrs Lto Registration  Free Tpl Insurance Free 1-year Gsis Insurance 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From City Government Of Mati And Inspect The Bidding Documents At The Address Given Below During 8:00am - 12:00nn To 1:00pm - 5:00pm. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On January 8, 2025 – January 28, 2025 From The Given Address Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of One Thousand Pesos (p1,000.00). The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees Presented In Person. 6. Bids Must Be Duly Received By The Bac Secretariat Through (i) Manual Submission At The Office Address Indicated Below, (ii) Online Or Electronic Submission As Indicated Below, On Or Before January 28, 2025 At 2:00 Pm. Late Bids Shall Not Be Accepted. 7. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 8. Bid Opening Shall Be On January 28, 2025 At 2:00 Pm At The Given Address Below Bac Conference Room, City Hall, City Of Mati, Province Of Davao Oriental. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 9. The City Government Of Mati Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 10. For Further Information, Please Refer To: Lucio F. Pequiro - Head, Bac Secretariat Bids And Awards Committee Bids And Awards Committee Office, City Hall, City Of Mati, Province Of Davao Oriental Bac_cityofmati@yahoo.com (087) 3883-167 11. You May Visit The Following Websites: For Downloading Of Bidding Documents: Www.philgeps.gov.ph Atty. Kareen Silver Marzan-manluyang Bac Chairperson

Details: Description Republic Of The Philippines Office Of The Municipal Mayor Bids And Awards Committee Burgos, Ilocos Sur Invitation To Bid For Farm Equipment For Registered Farmers Of Burgos, Ilocos Sur The Municipality Of Burgos, Ilocos Sur, Through The Virginia Tobacco Excise Tax (ra7171), Intends To Apply The Sum Of Php1,799,800.00 Being The Approved Budget For The Contract (abc) To Payments Under The Contract, Farm Equipment For Registered Farmers Of Burgos, Ilocos Sur – Municipalwide, Gds 2025-002. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. The Municipality Of Burgos, Ilocos Sur Now Invites Bids For The Above Procurement Project. Completion Of The Works Is Required Within 15 Cds. Bidders Should Have Completed A Contract Similar To The Project Within Three (3) Years Up To The Date Of Bidding. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly In Section Ii, Instructions To Bidders. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act 9184. Interested Bidders May Obtain Further Information From The Municipality Of Burgos, Ilocos Sur And Inspect The Bidding Documents At The Address Given Below During Office Hours From 9:00 Am – 4:00 Pm. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On January 9 – 27, 2024 From Given Address And Upon Payment Of The Applicable Fee For Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Php5,000.00. A Non-refundable Bidder’s Fee In The Amount Of Php2,000.00 Shall Also Be Paid To The Municipal Treasurer, Burgos, Ilocos Sur Not Later Than The Opening Of Bids. Official Receipts Shall Be Presented In Person As Proofs Of Payments And For Photocopying. The Municipality Of Burgos, Ilocos Sur Will Conduct A Pre-bid Conference On January 15, 2025, 2:00 Pm. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission On The Office Address As Indicated Below On Or Before January 27, 2025, 2:00 Pm. Late Bids Shall Not Be Accepted. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 15. Bid Opening Shall Be On January 27, 2025, 2024, 2:00 Pm At The Given Address Below. Bids Will Be Opened In The Presence Of The Bidder’s Representative/s Who Choose To Attend The Activity. All Bids (financial & Technical Documents) Shall Be Submitted In Three (3) Sets. One Original And Copies 1 & 2. The Municipality Of Burgos, Ilocos Sur Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. For Further Information, Please, Refer To: Mr. Oscar P. Luciano Bac Secretariat, Cp# 09266142033 Mun. Hall, Pob. Norte, Burgos, Ilocos Sur Date: January 8, 2025 Approved: Randolph A. Castillo Mpdc/bac Chairman Farm Equipment For Registered Farmers Of Burgos, Ilocos Sur Technical Specifications Particulars Qty Unit Cost 1. Polyethylene Hose (black Pipe), 2” X 200’, Sch. 40 20 Rolls 140,000.00 2. Polyethylene Hose (black Pipe), 1.5” X 200’, Sch. 40 21 Rolls 105,000.00 3. Centrifugal Electric Pump (2hp, 2” Outlet, 1.4” Inlet) 25 Units 400,000.00 4. Grass/brush Cutter (4 Stroke) 21 Units 268,800.00 *engine Type: Air-cooled, 4-cycle, Vertical *displacement: 30 – 35 Ml *maximum Output (kw/r/min): 1.0/6500 *fuel: Gasoline *fuel Tank Capacity: 0.75 – 0.80l *weight: Approximately 3.5 Kg. 5. Manual Knapsack Sprayer (stainless) 20 Units 86,000.00 6. Battery-operated Knapsack Sprayer 20 Units 50,000.00 7. Water Pump (diesel Engine) 25 Units 750,000.00 *12hp *type: Single Cylinder, Vertical, Air-cooled, 4-strolke, Direct Injection *displacement: 418l – 420l *compression Ratio: 19 – 20 *rotation Speed: 3500 Rpm – 3600 Rpm *starting System: Marine Pulley *fuel Tank Capacity: 5.5l – 6l

Details: Title: Rer B Parc Des Services Techniques Massy Palaiseau Amenagements Des Parcs Pour Vehicules De Maintenance Industriels Electriques - Raccords Supplementaires Aux Voies Des Futurs Locotracteurs Autonomes - Travaux De Génie Civil Et De Voie description: L’ Arrivée D’un Nouveau Matériel Roulant À Deux Niveaux Sur La Ligne B Nécessite L’adaptation Des Infrastructures Du Site De Massy-palaiseau Pour Les Activités Des Départements Matériels Roulants Férroviaire Et Ratp Infrastructures, Pour Permettre La Maintenance Des Matériels Roulants Existants Et Projetés. Cette Consultation S’inscrit Dans Le Cadre Du Projet Parc Des Services Techniques De Massy Palaiseau Et Permettra La Liaison De La Voie 10 Aux Futures Voies 78 / 80 Côté Ateliers Mrf. Ces Nouvelles Voies Accueilleront Les Futurs Locotracteurs Autonomes (tra) En 2026 Pour Permettre Le Rechargement Des Batteries. Le Présent Avis Concerne La Réalisation De Travaux De Voie Et De Génie Civil Pour L’adaptation Du Faisceau Nord Avec La Création De Deux Raccords De Voies. Les Travaux Comprennent Notamment : - Pour Les Travaux De Génie Civil : La Réalisation Des Études D’exe, Les Installations De Chantier, Les Travaux De Déposes / Démolitions, Les Travaux De Terrassements / Remblais, Les Travaux De Vrd, Les Travaux De Fondations Profondes, Les Travaux D’ouvrages En Béton, Les Travaux De Serrurerie / Métallerie. - Pour Les Travaux De Voie : La Sécurisation Du Chantier, Dépose Et Évacuation Des Appareils De Voie, Des Voies, Du Heurtoir, Pose D’appareils De Voie, Ballast, Pose De Poutre, Pose De Joints Isolants Collés, Pose De Heurtoir Mécano-soudé, Contrôle Et Réglage Des Joints Mécaniques, Raccordement De La Nouvelle Voie Au Talon De L’appareil De Voie N°276 (raccord 2), Raccordement De La Nouvelle Voie Au Talon De L’appareil De Voie N°50090 (raccord 1), Pose De Passage Routier, Mise En Place De Traversées Piétons Caillebotis Composite À Privilégier, Pose De Cheminement, Marquage Au Sol… Le Présent Avis De Marché Vise À Conclure Un Acoord Cadre À Bons De Commande Intégrant Un Montant Minimum Et Un Montant Maximum.