Battery Tenders

Description: CATEGORY: RECHARGEABLE BATTERY PACK

Description: CATEGORY: Battery Secondary Lead Acid MT Type (Defence) (Q2)

Description: Condemned Bg 8 Wheeler- Coaches With All Available Ferrous-non Ferrous-wooden Fittings Thereon But Excluding The Following Reclaimable Items-mechanical Rc Items-, (1) Buffer Plunger With Buffer Pads And Buffer Casings .( 2 ) Aluminum Water Tank (3) Distributor Valve Complete . Electrical Rc Items 1) All Type Of Batteries , Coach Numbers- 1) Sr Gs 986573 (2) Sr Wgscn 026261, (3) Sr Gs 996560 (4) Sr Demu/tc 14405 - [4 Coaches]. Ds8 No: 232873 Dt 17.06.24, Location: At Tondiarpet Marshalling Yard, Custodian: Sse/c&w/tnpm, Pl.no.98111061.note: At The Time Of Deivery Excluding Rc Items, Other Items Including Zero/low Value Items Like Rexin, Frp,resonal Foam Seats To Be Completely Cleared By Purchaser From The Location. 2) All Rc Items Should Be Handed Over To Custodian At Respective Location.(3). Rate Per Number Should Be Quoted (4) Cutting Permitted To Loadable Size Only. (5) Crane Loading Permitted. (6) Coaches Are In Grounded Condition...(7) Draw/hook And Screw Coupling Should Be Defaced Before Delivery. (8) In Sl N O .2 Bio Toilets, Regulators, Fans Removed.(9) Sl No. 1 & 3 Bio Toilets Salable.

Description: Universal Power Systems Battery Replacement

Description: Cond/scrap Alco Diesel Locomotives-vijayawada-pl No:98112326 [hsn Code-86079100]. Cond./scrap Alco Diesel Locomotive No-13245 Wdg3a , Of Dls/bza Consisting Of Main Chassis-chassis Fuel Tank, Cattle Guard With Stay Rods, Mr Air Tanks, Cylinder Blocks, Cylinder Head Assembly, Cylinder Head Studs, Valve Leaver Sets, Cylinder Liners, Fip Supports, Fips, Vibration Dampers, Vibration Damper Housings, Steel Cap Pistons, Crank Shaft Gear, Crank Shaft Dampers, Crank Shaft , Cam Shaft Bushings, S-pipes, Main Bearings, Gudgeon Pins, Connecting Rod Assembly, Extension Shafts, Extension Shaft Gears, Ost Assembly, Fip Covers, Tappet Covers, Turbo Super Chargers, Tsc Supports, Lubricating Oil Pumps, Push Rods, Push Rod Spacers, Fuel Jumpers, Water Jumpers, Water Risers, C/r Bushing With Nut & Bolts, Copper Pipes, Engine Base Sumps, On Line Lube Oil Centrifuge, Sump Covers, Piston Rings, System Pipes, Lube Oil Cooller (ptloc), Fuel Oil Filter Housing, Fast Coupling, Flexible Coupling, Rttm Blowers, Lube Oil Filter Drum, Inter Cooler Air Compressor, Radiator2-core Modified, After Cooler Air Compressor, Air Compressor, Fttm Blowers, Horizontal Shaft With Pulley, Right Angular Gear Box With U-shaft, Truck Without Traction Motors And Wheel Sets, Bogie Frame, Equalizer, Compensating Beams, Vertical Links, Outer Coil Springs, Inner Coil Springs, Spring Seaters, Brake Cylinders, Brake Hanger With Brake Heads, Brake Cylinder Pipes, Fish Plates, Re Silent Pads, Pull Rods, Slack Adjuster Assembly, Stay Plate, Gear Case, Vertical Dampers, Latter Dampers, Axle Boxes, Axle Boxes Hnbc With Bearings, Hand Brake Assembly, Engine Hood Consisting Of - Power Pack Hoods, Driver Cabins, Radiator Compressor Hoods, Fuel Oil Gauge, Water Expansion Tank, Traction Alternator, Exciter Generator, Aux Generator, Traction Motors, Bkbl, Power Cables, Control Wires, Ccem, Dem, Ep Contactor, Fpm, Bkt, Control Drum, Rev, Gf Contactor, Relay, Resister Grid, Rectifier, Air Brake System Bracket With Valves, Air Maize, Exhaust Manifold Set, J-filter Housing, Governor, Load Pad, Loco Side Buffers, Cbc Coupler With Draft Gear, Apu, Miscellaneous, With All The Above Items Contains ¿ Ferrous-96800kg, Copper-6613kg, Brass-840kg, Aluminium=647kg, Total Qty=104.900 Mt. (these Weights Are Obtained As Per Ds-8. All Weights Are Given By The Custodian. The Locomotive Is Available At Compound Of Dls/bza. Under Control Of Sse/loco/bza. Sold On Number Basis And Delivery On By Lot Basis. Cutting Is Permitted For Loading Purpose. This Locomotive Consisting Of Rc- Items-1) Wheel Sets With Bull Gear Suspension Tube-06-nos. 2) 8v 450/500 Ah Lead Acid Batteries -8nos. Note: A) The Above Rc-items Should Return To The Railways Before Effecting The Delivery Of The Cut Parts Of The Locomotive. B) The Purchaser Should Keep The Similar Items As Separate Heap. C) The Purchaser Must Clean The Cutting Area After Completion Of Delivery. Ds-8 No: 236200040. Dt.23.11.2024.

Description: Scrap And Unserviceable Condemned Bajaj Made Gc Max Three Wheeler Auto With M&p No 48, Mh -12-gt-7744, And Chassis No Md2alalzzuwg03396, Without Battery And Tyres Total Lot Qty: 01 No. *remarks: 1. Approach Road Available 2. There Is Scrap And Unserviceable Condemned Bajaj Make Gc Max Three Wheeler Auto With M&p No 48, Mh -12-gt- 7744 And Chassis No Md2alalzzuwg03396 With Or Without Battery, Tyres. 3. The Stockholder Is Responsible For The Assessment & Valuation Of Material On A Basis Subject To Any Variation During The Delivery By Actual Payment. 4. The Weight Has Been Assessed On Approximate Basis Subject To Any Variation During Delivery By Actual Unit Basis If Any. 5. No/similar And Other Type Of Material Is Lying Near The Lot. Sse/c&w/frt/mrj Has Assured To Remove The Extra Material Laying Near The Lot Or Side Assets. 6. The Quantity Physically Available. The Lot No & Measurement Has Been/bring Painted By The Stock Holder 7. The Lots Are Ok/net Ok For Auction Sale. 8. The Stock Holder Is Responsible For Any Alteration, Addition, Deletion & Variation In The Lot After Joint Inspection, If Any Found Subsequently 9. The Items Marked As Nfs (not For Sale) Will Not Be Delivered To The Purchaser Certified That No Unverified Material Is Lying Bear The Lot 10. Rc Book Available. 11. The Gas Cutting May Be Allowed For Easy Loading In The Truck 12. The Delivery Of The Lot Will Be On A Number Count Basis Only. 13. Bidders/purchasers Are Requested To Inspect & Clarify The Lot Material Personally Before Bidding. Location: Sse/c&w/frt Mrj Office Opposite To Bpcl Miraj - 416410

Description: Divisional Stores Depot-guntur [andhra Pradesh]. Condemned And Unserviceable Smf/vrla Lead Acid Batteries [plastic Body] Of 2v/1100ah, 2v/ 200ah And 6v/120ah And 12v/250 Ah, 125ah,180ah, 150ah, 100ah, 84ah, 75ah, 65ah, 42ah, 26ah, 18ah, 7ah, 4ah ,1a, Full Or Broken, With Or Without Connectors. Total Qty: 14.75 Mts. Location: Available Inside The Godown Of Dsd/gnt. Delivery On Actual Weighment Basis Only. Note: Cpcb Holder Only To Bid, Original Rc Book Of Cpcb Is Required At The Time Of Delivery. (validity From & To Date Should Be Clearly Mentioned In The Original Rc Book Of Cpcb.)

Description: Update 1 To Questions Answered: the Gao States The Following When Baa Applies: “(1) The Procurement Must Be Intended For Public Use Within The United States; And (2) The Items To Be Procured Or The Materials From Which They Are Manufactured Must Be Present In The United States In Sufficient And Reasonably Available Commercial Quantities Of A Satisfactory Quality. The Provisions Of The Act May Be Waived If The Head Of The Procuring Agency Determines The Act To Be Inconsistent With The Public Interest Or The Cost Of Acquiring The Domestic Product Is Unreasonable.” if These Do Not Apply To Our Case, Then We Can Go Open Market. 2. We Will Use The Existing Transformers Unless They Determine There Is A Need To Have The Supply Power To The Unit Stepped Down. 3. We Will Support Any Day Of The Week. Also, We Would Like To Have A Week, Or 2 Weeks’ Notice Prior To Any Requested Shutdowns. updated!!description Of Services:the Contractor Shall Provide All Personnel, Management, Supervision, Materials, Tools, Supplies, Equipment, Transportation, Labor, And Other Items And Services Necessary To Replace A Total Of Two (2) Uninterruptible Power Supply (ups) Systems In Building 4 Room #135 And Building #4 Room #339, At Base Seattle. The Contractor Must Perform To The Standards In This Contract. All Work Shall Comply With All Applicable Codes, Along With Federal, State And Local Regulations. . this Notice Is A Combined Synopsis/solicitation For A Commercial Products And Commercial Services In Accordance With Federal Acquisition Regulation Subpart 12.6, As Supplemented With Additional Information Included In This Notice. This Announcement Constitutes A Public Solicitation. Please Read This Entire Notice, The Instructions Herein, And The Attachment Documents Carefully. This Acquisition Is On A Small Business Set-aside Only. how To Respond: To Compete For This Project, Interested Parties Must Be Registered In Sam (system For Award Management) Prior To Close Of This Solicitation. Https://www.sam.gov/portal/public/sam/. The Vendors Sam Registration Must Be In An “active” Status Prior To Award. Vendors Must Ensure That The Above Listed Naics Codes Are Listed On Their Sam Registration To Perform This Type Of Service. cost Proposals: The Contract Will Be Awarded Using Simplified Acquisition Procedures In Accordance With Far Part 13 And Part 15 Provide Firm Fixed-price “broken Out By Labor Hours, Labor Category, Materials, And Other Direct Costs”. Offerors Must Submit The Proposal To Elizabeth Meister E-mail: Elizabeth.a.meister@uscg.mil. evaluation Criteria: The Government Will Award A Contract Resulting From This Request For Quote (rfq) To The Responsible Offeror Whose Offer Conforming To The Rfq Is The Lowest Price Technically Acceptable (lpta) Quote. The Lowest Priced Quote Will Be Evaluated On Technical Acceptability, If It Is Found To Be Acceptable, An Award Will Be Made. If It Is Found To Be Unacceptable, The Next Lowest Price Will Be Evaluated. This Process Will Continue Until A Technically Acceptable Offer Is Identified. description Of Work Required: contractor Shall Replace Two (2) Ups Systems. Contractor To Remove And Dispose Of Existing Ups System Located In Building 4 Room #135, And Ups System In Room #339, And Supply And Install New Ups Systems With New Lithium-ion Batteries. Contractor To Replace System With Brand Name Or Approved Equal. existing Ups Manufacturer And Model For Both Systems- Vertiv Liebert Npower 100 Kva 480 Volt 3-phase. Incoming Voltage To Ups Is 480v. After Ups, Voltage Steps Down To 208v.it Is Estimated That The Capacity Of The Existing Ups System In Each Room Is Too Large. Contractor Is To Present A Ups System Design To The Ko For Approval Prior To Purchase And Installation. suggested Ups Systems: manufacturer: Vertiv Liebert Exm 480v manufacturer: Eaton 93pm 480v manufacturer: Schneider Electric Galaxy Vs 480v existing Load On Ups System In Room #135 Is 21% And Room #339 Is Approximately 26%.new Ups Is To Be Sized To Existing Load Capacity Plus 25% Increase For Future Expansion. New Ups Must Fit Within Dimensions Of Existing Room. New Ups System Is To Supply Power To Connected Equipment For A Runtime Of 60 Minutes. ups Battery Type: Lithium Ion, Flame Retardant Case And Cover Meet Ul 1778 Standards. ups System Complies With The Most Recent Version Of Following Standards: Ul1778, Ul924, Ul1989 And Ul94 V-2, Bs 6290-4, Iec-60896-2 As Well As Standards Referenced In Section 4, And All Relevant Federal, State, And Local Standards And Codes. all Materials And Parts Supplied By The Contractor In This Sow Shall Be New, Are Fully Compatible With The Entire Ups System, And Comply With The Ups Manufacturer’s Specifications And Installation Standards. All Materials And Parts Shall Be Approved By The Ko Prior To Installation. submit Quotes To The Following E-mail Address By The Offer Due Date And Time: attn: Elizabeth Meister E-mail Address: Elizabeth.a.meister@uscg.mil With Solicitation Rfq Number Sps-uscg-250003 In Subject Line.

Description: CATEGORY: 20 U HEIGHT RACK WITH 19 INCH PROFILE FOR INSTALLING THE SUB SYSTEMS , 5KVA UPS WITH BATTERY BANK , FTLRB , 8-PORT RUGGED GIGABIT ETHERNET SWITCHES WITH EXTENDED TEMPERATURE , ELECTRICAL INTEGRATION OF THE SIMULATOR SYSTEM AS PER GIVEN BoM , HIGH-END WORKSTATION , AC-DC PROGRAMMABLE POWER SUPPLY , MULTIFUNCTION CONSOLE

Description: Cond. And Unservicable Maruti Suzuki Esteem No - Dl2cq2491 With Battery And Stephany, As Is Where Is Basis. As It Is. Note :- Sold As Scrap R.c Will Not Be Given, I.bond Will Be Taken Before Delivery.