Battery Tenders
Battery Tenders
COUNCIL FOR THE WELFARE OF CHILDREN, DSWD Tender
Others
Philippines
Details: Description Request For Quotation Sir/madam: Please Quote Your Government Price/s Including Delivery Charges, Vat Or Other Applicable Taxes, And Other Incidental Expenses For The Goods Listed In Annex A. Failure To Indicate Information Could Be Basis For Non - Compliance. Also, Furnish Us With Descriptive Brochures, Catalogues, Literatures And/or Samples, If Applicable. If You Are The Exclusive Manufacturer, Distributor Or Agent In The Philippines For The Goods Listed In Annex A Please Attach In Your Quotation A Duly Notarized Certification To This Effect. Please Accomplish And Submit This Form Together With Annex A; Philgeps Certificate / Registration Number; Valid 2025 Mayor's Permit Or Business Permit; And Copy Of Notarized Omnibus Sworn Statement (oss) To Council For The Welfare Of Children C/o Bac Secretariat At #10 Apo St., Santa Mesa Heights, Quezon City 1114 Metro Manila Or Email It To Bac@cwc.gov.ph Cc: Cwcbac@gmail.com On Or Before 07-march 2025, 10:00 A.m With Subject: Rfq Number - Name Of Bidder Very Truly Yours, (original Signed) Jovertlee C. Pudan, Enp Bac Chairperson Terms And Conditions: 1. Award Shall Be Made On Per: Item/lot Basis X Total Quoted Price. 2. Quotation Validity Shall Not Be Less Than Thirty (30) Days. 3. Good/s Shall Be Delivered Within Please See Annex A 4. Place Of Delivery: Please See Annex A 5. Terms Of Payment: Within 15-30 Days Upon Final Inspection And Acceptance. 6. Liquidated Damages/penalty: (1/10) Of One Percent For Everyday Of Delay Shall Be Imposed. 7. Indicate Brand, Model And Country Of Origin. 8. In Case Of Discrepancy Between Unit Cost And Total Cost, Unit Cost Shall Prevail. 9. Disclosure Of Relations: The Winning Bidder Shall Submit The Original Duly Signed And Notarized Omnibus Sworn Statement (oss) Within Ten (10) Calendar Days After The Conforme Of Notice Of Award (noa) 10. Warranty: A Warranty Security Shall Be Covered By A Retention Money In An Amount Equivalent To 5% Of The Contract Awarded, And Will Only Be Released After The Lapse Of The Warranty Period, As Stated In Section 62. Warranty - 62.1 Of Ra 9184 And Its 2016 Revised Irr ============== 1 1 Lot Procurement Of Pmos Office Supplies And Equipment "24 Pcs Printer Ink For Brother Dcp-t720dw Bt5000c - 6pcs Bt5000m - 6pcs Bt5000y - 6pcs Bt5000bk - 6pcs Abc: ₱10,800.00" "2 Pcs Printer Ink Cartridge For Brother Mfc-l8900cdw Tn 456 Bk - 2pcs Abc: ₱11,000.00" "6 Pcs Printer Ink Cartridge For Brother Mfc-l8900cdw Tn 456 C - 2pcs Tn 456 M - 2pcs Tn 456 Y - 2pcs Abc: ₱54,000.00" "1 Pc Rechargeable Batteries And Chargers Aaa Rechargeable (8pcs) Battery Hr03 Rechargeable Aaa Batteries Rate Voltage: 1.2v -normal Capacity 800mah 1. Low Self-discharge 2. Large Capacity, High Efficieny And Stability 3. Mercury-free And Environmentally Friendly, In Line With Environmental Standards 4. Wide Range Of Applications 5. Ni-mh Battery 6. Explosion-proof And Anti-leakage Double Protection Technology 7. Up To 5 Years Of Battery Life 8. Charging Up To 1000 Cycles Aa/aaa Compatible Battery Charger The Charger Has 4 Battery Slots, Which Can Quickly Charge Aa, Aaa, Nicd Nimh Batteries, Repair Damaged Batteries, And Charge Nicd Nimh Batteries. The Charger Has An Lcd Display That Can Determine The Capacity Of Each Battery Being Charged Charger Will Cut Off Charging When The Battery Is Full Abc: ₱1,500.00" "5 Pcs Extension Cords 4-gang Universal Outlet (3-gang Universal Outlet With Master Switch, 1-gang Universal Outlet With Ground Rigid Brass Strips For Internal Connection Outlets Are Made Of Copper Material For Better Grip Impact Resistant And Highly Conducive With Real Grounding System Connection For Safety With Built-in Safety Circuit Breaker With Built-in Lightning Protector Outlet Enclosures Are Made Up Of Fire-retardant Materials Maximum Wattage: 2500w Current: 10a Voltage: 250v Cord Length: 1.83 Meters Abc: ₱1,500.00" "5pcs Acrylic Stands Color: Clear Materials: Acrylic Product Dimensions: 4.72"" (l) X 8.77"" (w) X 4.45 (h) Item Weight: 0.66 Pounds Abc: ₱2,500.00" "5pcs Display Brochure Holders Material: Acrylic A5 Flip Horizontal (210mm X 148mm) Abc: ₱2,500.00" "1pc Window Curtain Blinds Size: 170 X 214 Cm (wxh) Color: White/ Cream Venetians Duo Roler Blinds Curtain Roler Blinds Curtain Duo Roler Blinds (include Brackets And Screws) Environmental Protection Polyster Fabric Easy To Clean Abc: ₱3,500.00" "2pcs Window Curtain Blinds Size: 160 X 120 Cm (wxh) Color: White/ Cream Venetians Duo Roler Blinds Curtain Roler Blinds Curtain Duo Roler Blinds (include Brackets And Screws) Environmental Protection Polyster Fabric Easy To Clean Abc: ₱4,000.00" "1pc Portable Document Scanner Compact Scanner With A Small Footprint Flexible Scanning With Vertical Path And Straight Path Scan Mode Scan Various Media Types Including Plastic Cards, Envelopes And Even Passports Fast Scan Speeds Of Up To 30ppm / 60ppm Wi-fi And Wi-fi Direct 2.4"" Lcd Touchsreen Panel Abc: ₱25,000.00" "1pc Paper Cutter 12 X 15 B4 Size Material: Wood Base / Metal Base Size: 50 X 40 X 8 Cm Abc: ₱800.00" "5pcs Clipboards With Cover Long: 35*23 Cm Abc: ₱1,000.00" "5pcs Clipboards Without Cover Long: 35*23 Cm Abc: ₱750.00" "2pcs Travel Adapter Conversion Plugs Us/eu/au To Uk (great Britain) Travel Adapter Plug Current: 15a Voltage: 250v Frequency: 50/60 Hz Material: Abs Plastic Safety & Realibility 100% Copper Abc: ₱200.00" "1pc 5gb Pocket Wifi With (2 Free Sim Card, Different Network) Connectivity: Connect Up To 15 Devices Network: 3g, 4g, 5g Wi-fi Band: Dual Band (2.4ghz, 5ghz) Battery: 9,800 Mah Screen: Size: 2.4 Inches Touchscreen Others: Nfc Capable Inclusions: 5gb Pocket Wifi Device, Charger Abc: ₱13,000.00" "10pcs Magazine File Box Single, Fits Legal Size Folders With Pocket For Label L-16 X W-5 X H-9 Abc: ₱2,000.00" "7pcs Storage Box Storage Box With Lid For Filing And Organizing Documents And Accessories Made With Thick Chip Board And Arlin Book Binding Cover For A Matte Finish Abc: ₱4,200.00" Delivery Date: Within 30 Calendar Days Upon Po Conforme Place Of Delivery: Pmo C/o Council For The Welfare Of Children, No. 10 Apo St., Santa Mesa Heights, Quezon City "contract Person: Mr. Jonathan James Endoma - 09457234155 Mr. Jim Carl Tuazon - 09630061000" *************nothing Follows************* Approved Budget Ceiling: ₱138,250.00 Charged To: Pmo Continuing Funds
Closing Date7 Mar 2025
Tender AmountPHP 138.2 K (USD 2.3 K)
Department Of School Education Tender
Goods
Electronics Equipment...+2Solar Installation and Products, Electrical and Electronics
GEM
India
Description: CATEGORY: Arduino UNO R3 , Arduino Nano , Raspberry Pi 3 , Arduino
Mega , Breadboards 800 and 400points , Berg Strip FandM ,
Zero PCB , 16x2 LDC Display with I2C module , USB Cables ,
9V Battery , Resistors capacitor linear voltage regulator Kit ,
Water Pump Module , Piezoelectric Plate , 8x8 LED Matrix
Module , Bluetooth Module , 7 Segment LED Display , GSM
Module , GPS Module , Laser Diode Emitter , LDR Module ,
Keypad , Joy Stick , Active Buzzer , Motor Driver L298P ,
Sound Playback Module , ESP 32 , Vibrating Motor , Alligator
Connector , DC Jack Male and Female , LED , IC LM555 ,
Diode and Transistor Kit , Button Switch Set , Touch Module
, Battery Clip , IR Sensors , Triple Axis Magnetometer , MQ
Sensor , IR Transmitter and Receiver , Ultrasonic Sensor
Module , Triple Axis Accelerometer , Pulse Rate Heart
Sensor , Relay module , Sound Module , IOT sensors , Power
Bank Module , Stepper Motor , DC Motor , Servo Motor , DIY
kit , 3D printer , Cardboard , stationary iteam , Wood Glue
500ml , Hacksaw Frame , Mini Hacksaw Frame , Tweezer
Set , Steel Shaft Claw Hammer , C-Clamp , Allen key Set ,
Drill Machine Set , Workstation For Drilling , Spanner Set ,
Vice Normal , Precision Screw Driver , Wire Stripper ,
Screwdriver , Cordless Rotary Multitool Set , Air Blower , File
Set , Mini File Set , Flexible Cutting Mat , Plastic Storage
Drawer , Pegboard , Hot Glue Gun , Digital Oscilloscope ,
Soldering Kit , Adapter , Electric Screw Driver , Dual
Temperature Heat Gun , Soldering helping Hand , Stainless
Steel Rule , Digital Vernier Caliper , Digital Multimeter , DIY
Paper Microscope , Telescope , Sewing Kit , Glue Stick ,
Cable Tie , Power Strip Adapters , Bulb Holder , Electric
wires 20M , First Aid Kit , Fire Extinguisher , Safety item ,
Furniture , Chairs , Storage Cabinet , solar trainer kit
Closing Date15 Mar 2025
Tender AmountRefer Documents
South Western Railway - SWR Tender
Auction
Scraps
Ireps
India
Description: Ubl/gsd/0513/ Ms /signal/24/k [pl No.98987331] Condemned And Un- Serviceable Signal Scrap Consisting Of Location Boxes Full/half/quarter With/with Out Wood/nfs Attachments, Relay Frames, Relay Racks With/with Out Electrical Wiring , Ms Ladder With/with Out Platform, Tld, Offset Bracket, Ctb Monkey Type, Route Indicator, Signals Pipes, Level Crossing Gate And Its Parts, Lifting Buzzers, Calling On Board, Boom Joints, Panel Boxes With/with Out Electrical Wiring, Boards, Sm Panel With/with Out Electrical Wiring, Wire Round Warning Signals, 2&3 Signal Aspect Unit, W Round Bell Stand, Point Rods, Tlj Boxes, Rods/bars, Power Panel, Ground Connection Rods, Signal Number Plates With Camp, Additional Unit For Junction Type Route Indicator, Ms Frames And Other Ms/ Signal Scrap.ms Scrap Consisting Of Ms/gi Sheets, Boilers, Tube/pipes, Cut Channels, Alternator Covers ,ceiling Fan Rods, Empty Solar Panels, Bend, Elbows, Flanges, Angles, Frames, Doors, Trolleys, Boards, Nut & Bolt, Footsteps, Fan Motor Covers, Fan Guard, Sheets/plates, Grills, Shutters, Ms Bowls, Ms Trays,ms Chaqure Plate, Air Filter, Racks, Boxes, Rods/bars, Ms Window Frames Off Sizes, Tanks, Steel Bars In Window Frames, Tie Bars, Coach Light Cut Up Parts, Iron Doors Off Sorts & Sizes. Ms Electrical Boxes, Ms Rope/chain With/with Out Hook, Channels, Rail Trolley Wheel Set, Conveyor Belt And Its Parts, Battery Boxes, Battery Containers And Ms Stand, Bridge Plates, Empty Electrical Boxes, Packing Rings, Different Types Of Boards And Boxes With Or Without Rusted. At The Time Of Delivery If Any Nfs Item Found In The Lot Should Be Returned To Railway. Available Under The Custody Of Cdms/rs Ward/gsd/ubl . Note: Bidder Has To Physically Inspect The Lot Before Bidding. Note: Cutting Permitted By Gas/manual Location: Road No 05 Gsd/ubl Bin No- 051 Remarks-. Delivery Should Be Start From One End. No Pick And Choose Allowed.
Closing Date29 Mar 2025
Tender AmountRefer Documents
VETERANS AFFAIRS, DEPARTMENT OF USA Tender
Healthcare and Medicine...+1Chemical Products
United States
Details: This Request For Information (rfi) - Is Issued Solely For Information And Planning Purposes Only And Does Not Constitute A Solicitation.
the Submission Of Pricing, Capabilities For Planning Purposes, And Other Market Information Is Highly Encouraged And Allowed Under This Rfi In Accordance With (iaw) Far 15.201(e).
see Attachment For Details:
Bipap V60 Replacement For Clarksburg Vamc
Brand Name Or Equal To Nihon Kohden Iaw Statement Of Work
Must Provide An Authorized Distributor Letter If You Are Not The Manufacturer At The Time Rfi Will Close To Qualify For This Solicitation .
Must Provide The Country Of Origin (coo) For Each Line Item
this Is A Requirement For:
u.s. Department Of Veterans Affairs Va Medical Center (vamc).
description:
the Clarksburg Vamc Requires The Contractor To Deliver Within 90 Days From Contract Award To The Va Medical Facility Warehouse Below During Normal Business Hours From 8:00 A.m. To 3:30 P.m. (est), Monday Through Friday:
delivery To:
u.s. Department Of Veterans Affairs
clarksburg Va Medical Center
warehouse/attn:
1 Medical Center Drive
clarksburg, Wv 26301
disclaimer:
this Rfi Is Issued Solely For Information And Planning Purposes Only And Does Not Constitute A Solicitation. All Information Received In Response To This Rfi That Is Marked As Proprietary Will Be Handled Accordingly. Iaw Far 15.201(e), Responses To This Notice Are Not Offers And Cannot Be Accepted By The Government To Form A Binding Contract. Responders Are Solely Responsible For All Expenses Associated With Responding To This Rfi.
note: The Contractor Shall Deliver Required Commodities (please See Attachments) No Later Than 90 Days Or Less From Date Of Award, Unless Otherwise Directed By The Contracting Officer (co). Commodities Shall Not Be Delivered To The Government Site On Federal Holidays Or Weekends Unless Directed By The Co. Delivery Shall Be Made Between The Hours Of 8:00 Am And 3:30 Pm Of The Delivery Location, During Normal Workday Business Hours.
the U.s. Government Is Performing Market Research To Identify Responsible Sources Who Have The Skills, Experience, And Knowledge Required To Successfully Meet The Requirements. Information Received From Market Research Will Determine The Best Acquisition Strategy And If Responsible Sources Exist For Competition, And/or A Total Small Business Set-aside. This Is Only For Market Research But May Result In An Invitation To An Open Discussion With The U.s. Government. This Notice Is Not To Be Construed As A Commitment By The U.s. Government. All Information Is To Be Submitted At No Cost Or Obligation To The U.s. Government.
any Information Submitted By Respondents To This Notice Is Strictly Voluntary. Propriety Information Or Trade Secrets Should Be Clearly Marked. Information Received Will Not Be Returned. The U.s. Government Reserves The Right To Reject, In Whole Or In Part, Any Private Sector Input As A Result Of This Sources Sought Notice/market Survey.
the U.s. Government Is Not Obligated To Notify Respondents Of The Results Of This Notice. All Responses To This Sources Sought Must Be Submitted To The Point Of Contact Listed Herein. This Does Not Constitute A Commitment, Implied Or Otherwise, That Procurement Will Be Accomplished And Is Not A Request For Proposal Or Invitation For Bid. Responding To This Notice In No Manner Guarantees A Contract Will Be Awarded.
**respondents To This Source Sought Announcement Capable Of Manufacturing These Items Should At A Minimum Provide The Following Information For U.s. Government Review**
please Indicate The Size Status And Representations Of Your Business, Such As But Not Limited To: Service-disabled Veteran Owned Small Business (sdvosb), Veteran Owned Small Business (vosb), Hubzone, Woman Owned Small Business (wosb), Large Business, Etc.
is Your Company Considered Small Under The Naics Code Identified Under This Rfi?
are You The Manufacturer Or Distributor Of The Items Being Referenced Above?
what Is The Place Of Manufacturing For The Requested Items? 52.212-3(j)
if Paragraph (j) Of The Provision Is Applicable, A Written Submission Is Required. Offerors Must Be Registered In Sam At Time Of Offer Submission. Must Complete Place Of Manufacturer.
(j) Place Of Manufacture. (the Solicitation Is Predominantly For The Acquisition Of Manufactured End Products.) For Statistical Purposes Only, The Offeror Shall Indicate Whether The Place Of Manufacture Of The End Products It Expects To Provide In Response To This Solicitation Is Predominantly
(1) __ In The United States (check This Box If The Total Anticipated Price Of Offered End Products Manufactured In The United States Exceeds The Total Anticipated Price Of Offered End Products Manufactured Outside The United States); Or
(2) __ Outside The United States.
if You Are Not A Manufacturer. Company Shall Provide An Authorized Distributor Or Reseller Letter From Original Equipment Manufacturers (oem) To Qualify For This Requirement.
does Your Company Have An Fss Contract With Gsa Or The Nac Or Are You A Contract Holder With Nasa Sewp Or Any Other Federal Contract? If So, Please Provide The Contract Type And Number And Sin Number?
if You Are An Fss Gsa/nac Or Nasa Sewp Contract Holder Or Other Federal Contract Holder, Are The Referenced Items/solutions Available On Your Schedule/contract/sin?
must Provide Manufacture Name (oem) & Manufacturer Part # (mpn).
please Provide General Pricing For Your Products/solutions For Market Research Purposes.
Legal Business/company Name (as It Is Indicated In Https://sam.gov ).
Unique Entity Id Uei (sam) & Duns Number.
Warranty Information (can Be A Separate Attachment).
Point Of Contact Name, Telephone Number And Email Address.
must Provide The Estimated Delivery Time Frame After Award. For Example: Within 60 Days Aro, Within 90 Days Aro.
the Government Intends To Award A Firm-fixed Price (ffp) Contract For This Purchase.
to Be Considered For Award, Prospective Quoters Must Be Registered With The System For Award Management (sam) Website And Complete Representations And Certifications At Https://www.sam.gov . Prospective Awardees Must Be Registered With The System For Award Management (sam) At Http://www.sam.gov. Prior To Award And Through Final Payment And Must Complete The Online Representations And Certifications Application (orca) At Http://www.sam.gov Prior To Award And Through Final Payment. Contract Will Not Be Awarded Until Sam Registration Has Been Completed. Sdvosb And Vosb Socio-economic Categories Must Be Verified In The Sba Website, U.s. Small Business Administration: Https://veterans.certify.sba.gov, At The Time Of Receipt Of Quotes And At The Time Of Award.
responses To This Notice Shall Be Submitted Via Email: Mohsin.abbas2@va.gov. No Telephone Responses Shall Not Be Accepted. Responses Must Be Received No Later Than Friday, Feb 28, 2025, By 3:00 Pm (est).
responses To This Sources Sought Notice Will Be Utilized By The Government To Make Appropriate Acquisition Decisions. After Review Of The Responses To This Sources Sought Notice, A Solicitation Announcement May Or May Not Be Published In Sam.gov/open Market Or Gsa Ebuy.
statement Of Work (sow)
bipap V60 Replacement
general:
scope Of Services:
the Purpose Of This Requirement Is To Replace The Current V60 Non-invasive Positive Pressure Ventilators For The Respiratory Department At The Louis A. Johnson Vamc. The Brand Name Nkv-330 Ventilator System Or Equal Requirement Includes The Ventilators, Accessories/carts, And Software For The Eight (8) Systems. The Procurement Shall Include All Parts, Materials, Labor, Software/licenses, And Travel To Complete The Full Installation Of The Ventilators.
location: Louis A. Johnson Va Medical Center, 1 Medical Center Drive, Clarksburg, Wv 26301
performance Period: Delivery Within 90 Days From Contract Award
work Hours:
hours Of Operation: Normal Business Hours Are Monday Through Friday, 7:00 A.m. To 4:00 P.m., Excluding Holidays. Should The Contractor Require Work Afterhours, The Contractor Shall Arrange In Advance With The Contracting Officer S Representative (cor).
delivery Hours: The Warehouse Is Open To Receive Deliveries Monday Through Friday, 7:00 A.m. To 4:00 P.m., Excluding Holidays.
national Holidays: The Holidays Observed By The Federal Government Are: New Year S Day, Martin Luther King Day, President S Day, Memorial Day, Juneteenth, Independence Day, Labor Day, Columbus Day, Veteran S Day, Thanksgiving Day, And Christmas Day And Any Other Day Specifically Declared By The President Of The United States To Be A National Holiday. Contractor May Work On Holidays With Prior Communication And Coordination.
specifications:
minimum Technical Requirements: Brand Name Nkv-330 Ventilator System Or Equal:
the Procurement Is For A Quantity Of Eight (8) Non-invasive Positive Pressure Ventilators.
six Ventilators Shall Include A Wheeled Trolley, Bedrail Hook, Etco2 Cable, Dual Oxygen Cylinder Holder, Circuit Arm, Waterbag Pole, And 8ft Diss Oxygen Hose.
two Ventilators Shall Include A Wheeled Trolley, Bedrail Hook, Dual Oxygen Cylinder Holder, Circuit Arm, Waterbag Pole, And 8ft Diss Oxygen Hose.
the Ventilators Shall Have Bilevel Positive Airway Pressure (bipap) Capability.
the Devices Should Have Heated High Flow Nasal Cannula Capability.
the Ventilator Shall Be Able To Be Used In The Following Modes:
spont Ps (spontaneous Ventilation With Pressure Support)
s/t (spontaneous With Timed Backup)
pcv (pressure Control Ventilation)
prvc (pressure Regulated Volume Control)
pps (proportion Pressure Support Ventilation)
o2 Therapy (high Flow Oxygen Therapy)
the Systems Shall Be Functional With Or Without Built-in Leak Circuits.
the Systems Shall Have Dual Hepa Filtration.
the System Shall Have Visible Alarms For Critical Ventilator Events.
the Ventilators Shall Include Full Data Disclosure With At Least 72 Hours Of Continuous Analog Signals Stored.
the Procurement Shall Include Roll Stands And The Required Brackets/mounts For Use With The Roll Stands.
the System Shall Include All Necessary Software And Licenses.
the Ventilators Shall Have A Color Touch Screen At Least 12 Inches Diagonally.
the Ventilators Shall Have A Battery Life Of At Least 5 Hours And/or Continuous Battery Life With Hot-swappable Batteries.
the Devices Should Feature Integrated Capnography (etco2) Monitoring Capability.
the Devices Should Be Compatible With Nppv Masks.
the Unit Must Have Or Accept The Bracket Necessary For The Fisher & Paykel Mr850 Heated Humidifiers That Will Be Used In-circuit.
the Systems Should Include An Anti-asphyxiation Valve.
contractor Shall Provide Two Copies Of The Operating And Service Manuals.
delivery Requirements
delivery Is Required 90 Days From Award Of The Contract.
large Deliveries Are To Be Coordinated In Advance With The Cor To Ensure Necessary Planning Takes Place.
contractor Is To Provide The Cor With Shipment Tracking Information.
installation Requirements
full Installation Of The System Shall Be Included As A Part Of This Contract.
all Parts, Materials, Tools, Labor, And Travel To Complete The Installation Shall Be Included As A Part Of This Contract.
contractor Is Required To Complete All Configuration For The System To Be Usable.
contractor Shall Provide Validation That The System Is Fully Functional Upon Completion Of The Installation/implementation.
patient Health Information
the Contractor Shall Safeguard Patient Health Information.
the Contractor Shall Report To The Biomedical Engineering Department Any Issues With Disclosed Or Unsecure Patient Health Information.
de-installation Requirements
contractor Shall Not Remove Any Hard-drives Or Storage Systems Containing Sensitive Or Patient Health Information.
training Requirements
contract Shall Include Training For The End-users In The Operation Of The System.
training Shall Be On The Function And Use Of The Device, In Addition To Any Software/applications During The One Week Of Installation.
training Shall Be On-site.
contract Shall Include Training For The Technical Professionals (biomedical Equipment Support Specialists)
training Shall Include Two Days Of On-site Instruction Covering Operation, Basic Servicing, Preventative Maintenance, Disassembly And Reassembly, And System Servicing.
contractor Requirements
all Contractor Personnel Performing Installation Services Of The Equipment Shall Have Factory Training And Experience In The Implementation Of The Equipment.
contractor Shall Provide Copies Of Training Certificates For The Contractor Personnel Performing Work On-site Upon The Request Of The Government.
warranty Information
the Equipment Shall Have A Warranty Of 1 Year From The Full Installation/acceptance Of The Equipment.
warranty Support Shall Include Repair Of The System.
warranty Support Shall Include All Parts, Materials, Labor, And Travel To Complete The Repair Or Maintenance.
requests For Warranty Support Shall Be Made To The Telephone Support Number Provided By The Contractor.
warranty Support Requests Shall Be Responded To Within 1 Day.
contractor Shall Provide A Copy Of The Service Report, Complete With Test Data, To The Contract Cor Within Five Working Days After Completion Of Any Services.
service Reports Shall Include Identifying Information About The Equipment, All Services Provided During The Service Visit, Any Issues Found During The Visit, The Technician/engineer Names Of The Personnel Performing Work, And The Date Service Was Provided.
on-site Procedures
contractor Personnel Arriving On-site To Perform Work Shall Report To The Biomedical Engineering Department.
contractor Personnel Shall Sign In Using The Department S Vendor Sign In Sheet, Filling Out All Required Information.
contractor Personnel S Tool Bags Are Subject To Inspection By The Biomedical Engineering Department Upon Arrival And Upon Departure.
contractor Personnel Shall Sign Out Upon Completion Of Visit.
prior To Departure, Contractor Personnel Are Required To, At A Minimum, Verbally Report Any Issues With The Equipment To The Biomedical Engineering Department, Especially Noting If The System Is Still Down Or Not Fully Repaired.
the Va Campus Is Non-smoking. Contractor Personnel Are Required To Comply With This Policy.
parking. It Is The Responsibility Of The Contractor To Park In The Appropriate Designated Parking Areas.
safety And Security
contractor Shall Follow All Occupational Safety And Health Administration (osha) Laws And Regulations. The Contractor Is Responsible For Reporting Any Hazards They Come Across To Their Point Of Contact.
contractor Shall Follow All Local Procedures Concerning Infection Control. Should The Contractor Be Unsure Of The Requirements, The Cor Can Provide The Specific Information And Procedures.
contractor Personnel Shall Wear Visible Identification At All Times While On Va Property. Contract Personnel Are Required To Identify Themselves As Such To Avoid Creating An Impression In The Minds Of Members Of The Public That They Are Government Officials.
property Damage
the Contractor Shall Take All Necessary Precautions To Prevent Damage To Any Government Property.
the Contractor Shall Report Any Damages Immediately And Shall Be Assessed Current Replacement Costs For Property Damaged By The Contractor Unless Corrective Action Is Taken.
any Damaged Material (i.e., Trees, Shrubs, Lawn/turf, Curbs, Gutters, Sidewalks, Etc.) Will Be Replaced In A Timely Manner Or Corrected By The Contractor With Like Materials, At No Extra Cost To The Government, Upon Approval Of The Contracting Officer.
quality Assurance
end-users, Biomedical Engineering, And/or The Contract Cor Shall Perform System Verification Tests To Ensure The System Is Fully Functional Following Service/repairs.
issues With The Quality Of The Contractor S Work Will Be Communicated Through The Contracting Officer To The Contractor Point Of Contact For Resolution.
documentation With Be Completed In The Government Systems.
records Management Obligations
a. Â applicability
this Clause Applies To All Contractors Whose Employees Create, Work With, Or Otherwise Handle Federal Records, As Defined In Section B, Regardless Of The Medium In Which The Record Exists. Â
b. Â definitions
Federal Record As Defined In 44 U.s.c. § 3301, Includes All Recorded Information, Regardless Of Form Or Characteristics, Made Or Received By A Federal Agency Under Federal Law Or In Connection With The Transaction Of Public Business And Preserved Or Appropriate For Preservation By That Agency Or Its Legitimate Successor As Evidence Of The Organization, Functions, Policies, Decisions, Procedures, Operations, Or Other Activities Of The United States Government Or Because Of The Informational Value Of Data In Them. Â
the Term Federal Record:
includes [agency] Records.â
does Not Include Personal Materials.
applies To Records Created, Received, Or Maintained By Contractors Pursuant To Their [agency] Contract.
may Include Deliverables And Documentation Associated With Deliverables.
c. Â requirements
contractor Shall Comply With All Applicable Records Management Laws And Regulations, As Well As National Archives And Records Administration (nara) Records Policies, Including But Not Limited To The Federal Records Act (44 U.s.c. Chs. 21, 29, 31, 33), Nara Regulations At 36 Cfr Chapter Xii Subchapter B, And Those Policies Associated With The Safeguarding Of Records Covered By The Privacy Act Of 1974 (5 U.s.c. 552a). These Policies Include The Preservation Of All Records, Regardless Of Form Or Characteristics, Mode Of Transmission, Or State Of Completion.â
in Accordance With 36 Cfr 1222.32, All Data Created For Government Use And Delivered To, Or Falling Under The Legal Control Of, The Government Are Federal Records Subject To The Provisions Of 44 U.s.c. Chapters 21, 29, 31, And 33, The Freedom Of Information Act (foia) (5 U.s.c. 552), As Amended, And The Privacy Act Of 1974 (5 U.s.c. 552a), As Amended And Must Be Managed And Scheduled For Disposition Only As Permitted By Statute Or Regulation.â
in Accordance With 36 Cfr 1222.32, Contractor Shall Maintain All Records Created For Government Use Or Created In The Course Of Performing The Contract And/or Delivered To, Or Under The Legal Control Of The Government And Must Be Managed In Accordance With Federal Law. Electronic Records And Associated Metadata Must Be Accompanied By Sufficient Technical Documentation To Permit Understanding And Use Of The Records And Data.â
[agency] And Its Contractors Are Responsible For Preventing The Alienation Or Unauthorized Destruction Of Records, Including All Forms Of Mutilation. Records May Not Be Removed From The Legal Custody Of [agency] Or Destroyed Except For In Accordance With The Provisions Of The Agency Records Schedules And With The Written Concurrence Of The Head Of The Contracting Activity. Willful And Unlawful Destruction, Damage Or Alienation Of Federal Records Is Subject To The Fines And Penalties Imposed By 18 U.s.c. 2701. In The Event Of Any Unlawful Or Accidental Removal, Defacing, Alteration, Or Destruction Of Records, Contractor Must Report To [agency]. The Agency Must Report Promptly To Nara In Accordance With 36 Cfr 1230.
the Contractor Shall Immediately Notify The Appropriate Contracting Officer Upon Discovery Of Any Inadvertent Or Unauthorized Disclosures Of Information, Data, Documentary Materials, Records, Or Equipment. Disclosure Of Non-public Information Is Limited To Authorized Personnel With A Need-to-know As Described In The [contract Vehicle]. The Contractor Shall Ensure That The Appropriate Personnel, Administrative, Technical, And Physical Safeguards Are Established To Ensure The Security And Confidentiality Of This Information, Data, Documentary Material, Records And/or Equipment Is Properly Protected. The Contractor Shall Not Remove Material From Government Facilities Or Systems, Or Facilities Or Systems Operated Or Maintained On The Government S Behalf, Without The Express Written Permission Of The Head Of The Contracting Activity. When Information, Data, Documentary Material, Records And/or Equipment Is No Longer Required, It Shall Be Returned To [agency] Control, Or The Contractor Must Hold It Until Otherwise Directed. Items Returned To The Government Shall Be Hand Carried, Mailed, Emailed, Or Securely Electronically Transmitted To The Contracting Officer Or Address Prescribed In The [contract Vehicle]. Destruction Of Records Is Expressly Prohibited Unless In Accordance With Paragraph (4).
the Contractor Is Required To Obtain The Contracting Officer's Approval Prior To Engaging In Any Contractual Relationship (sub-contractor) In Support Of This Contract Requiring The Disclosure Of Information, Documentary Material And/or Records Generated Under, Or Relating To, Contracts. The Contractor (and Any Sub-contractor) Is Required To Abide By Government And [agency] Guidance For Protecting Sensitive, Proprietary Information, Classified, And Controlled Unclassified Information.
the Contractor Shall Only Use Government It Equipment For Purposes Specifically Tied To Or Authorized By The Contract And In Accordance With [agency] Policy.â
the Contractor Shall Not Create Or Maintain Any Records Containing Any Non-public [agency] Information That Are Not Specifically Tied To Or Authorized By The Contract.â
the Contractor Shall Not Retain, Use, Sell, Or Disseminate Copies Of Any Deliverable That Contains Information Covered By The Privacy Act Of 1974 Or That Which Is Generally Protected From Public Disclosure By An Exemption To The Freedom Of Information Act.â
the [agency] Owns The Rights To All Data And Records Produced As Part Of This Contract. All Deliverables Under The Contract Are The Property Of The U.s. Government For Which [agency] Shall Have Unlimited Rights To Use, Dispose Of, Or Disclose Such Data Contained Therein As It Determines To Be In The Public Interest. Any Contractor Rights In The Data Or Deliverables Must Be Identified As Required By Far 52.227-11 Through Far 52.227-20.
training. Â all Contractor Employees Assigned To This Contract Who Create, Work With, Or Otherwise Handle Records Are Required To Take [agency]-provided Records Management Training. The Contractor Is Responsible For Confirming Training Has Been Completed According To Agency Policies, Including Initial Training And Any Annual Or Refresher Training.â
line-item Description
bipap V60 Replacement
Brand Name Or Equal To Nihon Kohden Iaw Sow
b.3 Price/cost Schedule
item Information
item Number
description Of Supplies/services
quantity
unit
unit Price
amount
0001
6.00
ea
__________________
__________________
comprehensive Nkv330, Trolley, Accessories
nkv330-comp-t/za
"brand Name Or Equal To Nihon Kohden Iaw Sow"
principal Naics Code: 339112 - Surgical And Medical Instrument Manufacturing
product/service Code: 6515 - Medical And Surgical Instruments, Equipment, And Supplies
manufacturer Part Number (mpn): Nkv330-comp-t/za
local Stock Number: Nkv330-comp-t/za
0002
2.00
ea
__________________
__________________
transport Nkv330, Trolley, Accessories
nkv330-tp-t/za
"brand Name Or Equal To Nihon Kohden Iaw Sow"
principal Naics Code: 339112 - Surgical And Medical Instrument Manufacturing
product/service Code: 6515 - Medical And Surgical Instruments, Equipment, And Supplies
manufacturer Part Number (mpn): Nkv330-tp-t/za
local Stock Number: Nkv330-tp-t/za
0003
4.00
bx
__________________
__________________
nppv Capone Mask, Medium, Bx 4
a/msk3314p-4
"brand Name Or Equal To Nihon Kohden Iaw Sow"
principal Naics Code: 339112 - Surgical And Medical Instrument Manufacturing
product/service Code: 6515 - Medical And Surgical Instruments, Equipment, And Supplies
manufacturer Part Number (mpn): A/msk3314p-4
local Stock Number: A/msk3314p-4
0004
4.00
bx
__________________
__________________
nppv Capone Mask, Large, Bx 4
a/msk3313p-4
"brand Name Or Equal To Nihon Kohden Iaw Sow"
principal Naics Code: 339112 - Surgical And Medical Instrument Manufacturing
product/service Code: 6515 - Medical And Surgical Instruments, Equipment, And Supplies
manufacturer Part Number (mpn): A/msk3313p-4
local Stock Number: A/msk3313p-4
0005
4.00
bx
__________________
__________________
nppv Capone Mask, Small, Bx 4
a/msk3315p-4
"brand Name Or Equal To Nihon Kohden Iaw Sow"
principal Naics Code: 339112 - Surgical And Medical Instrument Manufacturing
product/service Code: 6515 - Medical And Surgical Instruments, Equipment, And Supplies
manufacturer Part Number (mpn): A/msk3315p-4
local Stock Number: A/msk3315p-4
0006
1.00
ea
__________________
__________________
nkv-330 Biomed Training
"brand Name Or Equal To Nihon Kohden Iaw Sow"
principal Naics Code: 339112 - Surgical And Medical Instrument Manufacturing
product/service Code: 6515 - Medical And Surgical Instruments, Equipment, And Supplies
manufacturer Part Number (mpn): #330-bmd Training
local Stock Number: #330-bmd Training
grand Total
__________________
Closing Soon28 Feb 2025
Tender AmountRefer Documents
Internal Services Department Tender
Electronics Equipment...+1Electrical and Electronics
United States
Description: Blood Warmer Mount & Batteries Blood Warmer Mount & Batteries
Closing Soon3 Mar 2025
Tender AmountRefer Documents
City Of Cape Town Tender
Goods
Others
South Africa
Description: * Quotation Conditions Clause - 2.14.1 <(>&<)> 2.15 Provide, On Request By The Cct, Any Other Material That Has A Bearing On The Quotation Offer, The Supplier#s Commercial Position (including Joint Venture Agreements), Preferencing Arrangements, Or Samples Of Materials, Considered Necessary By The Cct For The Purpose Of The Evaluation Of The Quotation. If The Specifications Require The Supplier To Provide Samples/technical Data Sheets, These Shall Be Provided Strictly In Accordance With The Instructions Set Out In The Specification. If Such Samples /technical Data Sheets Are Not Submitted As Required In The Bid Documents Or Within Any Further Time Stipulated By The Cct In Writing, Then The Bid Concerned May Be Declared Non-responsive. # Wherever Reference Is Made To Any Particular Trade Mark, Name, Patent, Design, Type, Specific Origin Or Producer, Such Reference Shall Be Deemed To Be Accompanied By The Words "or Equivalent" # Nb: The Municipal Bidding Document 6.1 (mbd 6.1) Is Attached, In Order To Be Eligible For Preference Points Bidders Are Required To Submit A Duly Completed, Current Dated Mbd 6.1 Document With Supporting Documents With Each And Every Rfq Submission, Failure To Submit Will Result In Zero Point Allocation. Portable Gas Detectors <(>&<)> Docking Station For Calibration Testing. Quantities Required: 3 X Portable Gas Detectors 1 X Docking Station For The 3 Gas Detectors. Including All Gas Pump Testers And All Requirements Included. Monitor Oxygen Levels Within A Room Or Area Of Work. Must Have Warning Alarm, Within A Maximum Of 60 Seconds After Detection Alert. Must Detect All Dangerous Gases And Or Any Oxygen Displacement In The Proximity Or Area. Ip67 Rated Portable To Carry Around And Carry On The Body. Must Include The Sensor And Test Gases. Chargeable And Include The Docking Station For Charging And Calibration Tests. 12-volt Power Supply Unit. Docking Station - If A Rechargeable Gas Detection Device Is Placed Inside The Docking Station While Switched Off, It Will Automatically Start Charging. Once It Is Fully Charged, The Docking Station Will Switch To Trickle Charge Mode To Conserve The Battery. The Docking Station Is Supplied With Power By A 12-volt Power Supply Unit. Wherever Reference Is Made To Any Particular Trade Mark, Name, Patent, Design, Type, Specific Origin Or Producer, Such Reference Shall Be Deemed To Be Accompanied By The Words "or Equivalent". For More Information Please Call Gideon Keyser On T: 021 444 8385 | C: 084 751 0817 Or Nathan Theys 073 256 4749 Wherever Reference Is Made To Any Particular Trade Mark, Name, Patent, Design, Type, Specific Origin Or Producer, Such Reference Shall Be Deemed To Be Accompanied By The Words "or Equivalent". Nb!!! Please Ensure That You Attach The Technical Data Sheets And Pictures Of The Item Quoted On, To Your Rfq Submission****failure To Adhere To This Requirement, May Result In Your Offer Being Non-responsive**** Allocation Of Preference Points *nb: The Municipal Bidding Document 6.1 (mbd 6.1) Has Been Amended, In Order To Be Eligible For Preference Points Bidders Are Required To Submit A Duly Completed Mbd 6.1 Document With Supporting Documents With Each And Every Rfq Submission. In Order To Qualify For Preference Points, It Is The Responsibility Of The Bidder To: Submit A Duly Completed Mbd 6.1 Form (bidders Must Indicate How They Claim Points For Each Specific Goal). Submit Documentary Proof Of Updated Bbbee Certificate/sworn Affidavit And/or Cipc Certificate With Each Rfq Submission To Validate Specific Goals. (if A Bidder Is Registered And Active On The City#s Supplier Database And Has Submitted The Bbbee Certificate/ Sworn Affidavit/ Cipc Certificate, The Submission Of Said Documents Is Not Necessary). It Is Therefore Incumbent On Suppliers To Ensure That Documents Are Kept Updated. Failure To Comply With The Above Will Result In A Zero (0) Allocation For Preference Points. *** Please Ensure That All Required Insurances Such As Your Public Liability, Employers Liability Or Coida And Motor Vehicle Insurance Are Attached And That They Are Up-to-date. If You Utilise Couriers And Do Not Have Motor Vehicle Insurance, Then Please Mention This. Also Ensure That Your Updated Declaration Of Interest And Bbbee Is Attached At All Times***
Closing Date6 Mar 2025
Tender AmountRefer Documents
BALANTANG ELEMENTARY SCHOOL Tender
Publishing and Printing
Philippines
Details: Description 60 Reams Bond Paper, A4 30 Reams Bond Paper, Long 5 Reams Bond Paper, Short 10 Pcs Clearbook, A4 5 Bxs Clip, Backfold 25mm 10 Bxs Clip, Backfold 50mm 10 Pcs Correction Tape 5 Packs Cutter Blade, Big, Trio 3 Pcs Cutter/utillity Knife, All Purpose 10 Pcs Data File Box W/ Cover 15 Rolls Double Sided Tape, 24mm 1 Box Envelop Documentary, Legal 5 Bxs Fastener, Pvc 300 Pcs Folder Jackets, Transparent 1 Pack Folder W/ Tab, A4, 100s, System 2 Packs Folder W/ Tab, Legal, 100s, System 30 Pcs Glue Stick, Big 5 Pcs Glue Stick, Paste, Elmers 50 Pcs Glue Stick, Small 3 Btls Glue, All-purpose., Elmers 1 Pcs Highlighter Green 10 Pcs Index Paster W/ Sign Here Label 6 Btls Ink, Bother, Bt D60 Blk 6 Btls Ink, Bt5000 (cyan, Magenta, Yellow) 1 Btls Ink, Canon Gi-790 (black, Cyan, Magenta, Yellow) 15 Btls Ink, Epson 003 Black 15 Btls Ink, Epson 003 Cyan 15 Btls Ink, Epson 003 Magenta 15 Btls Ink, Epson 003 Yellow 6 Btls Inks Epson 664 Cyan 6 Btls Inks, Epson 664 Black 6 Btls Inks, Epson 664 Magenta 6 Btls Inks, Epson 664 Yellow 1 Pack Laminating Film, 100s, A4 5 Rls Masking Tape, 24mm 5 Rls Masking Tape, 48mm 5 Pads Notepad, Stick On 50mmx76mm 5 Pads Notepad, Stick On 76mmx76mm 5 Packs Parchment Paper, A4 20 Packs Photo Paper, A4 10 Bxs Plastic Fastener 1 Pack Push Pins 5 Pcs Record Book, 300pages, Speedway 10 Pcs Sign Pen, Medium Tip, Black, 0.5 2 Bxs Staple Wire, Binder Typer, 23/13 5 Bxs Staple Wire, Standard #35 5 Packs Sticker Paper, A4 10 Pcs Data File Box 50 Packs Vellum Board 3 Cans Air Freshener 3 Gals Alcohol 3 Pcks Battery Dry Cell, Aa 3 Pcks Battery Dry Cell, Aaa 5 Pairs Battery, Dry Cell, Big 3 Gals Bleaching Solution, Zonrox 5 Pouches Detergent Powder, 2.2 Kgs 3 Cans Disinfectant Spray 1 Btl Glass Cleaner 2 Pcs Glue Gun, Big 2 Pcs Glue Gun, Small 60 Pcs Medals, Bronze 6cm 20 Pcs Medals, Gold 6cm 20 Pcs Medals, Silver 6cm 1 Gal Muriatic Acid 2 Pcs Philippine National Flag 10 Rls Ribbons(blue) 10 Rls Ribbons(red) 10 Rls Ribbons(yellow) 3 Btls Toilet Bowl Cleaner And Urinal 5 Rolls/packs Trash Bags, Xxl 3 Pcs Whistles, Sports 1 Unit Calculator, Compact, 12-digits 1 Unit Stapler, Binder, Hd-max
Closing Soon27 Feb 2025
Tender AmountPHP 116.4 K (USD 2 K)
Eastern Samar State University - ESSU Tender
Laboratory Equipment and Services
Philippines
Details: Description Request For Quotation (rfq) Date: February 23, 2025 Rfq No.: 2025-ron027 Pr#: 2025-02-076 The Owner/proprietor _________________________ _________________________ Sir/ma’am: Please Quote Your Price For The Items Specified Below, Taking Into Consideration The Following & Fill-up The Above Portion “the Owner/proprietor& The Portion Below The Price Quotation: Name Of The Transaction: Purchase Of Supplies For Coe Physics And Chemistry Laboratory Use In Compliance With The Copc Requirement. Terms And Conditions 1. The Total Approved Budget For The Contract (abc) Is Six Hundred Forty-eight Thousand Nine Hundred Pesos Only (₱648,900.00) 2. Price Quotation Should Be Inclusive Of The Required Tax Obligations; 3. Submission Of Bids Through Sealed Envelope Or Electronic Mail To Essubacoffice1@gmail.com When: On Or Before 9:00 Am Of February 26, 2025 Where: Quotation Drop Box, Bac Office, 2nd Floor Of Essu Admin Building 4. Opening Of Submitted Rfqs: When: Exactly 10:00 Am Of February 26, 2025 Where: Procurement Office, 2nd Floor Of Essu Admin Building 5. Evaluation Of Bids Shall Be Conducted On A “per Item” Basis; Delivered To Essu Main Campus 6. Delivery Period Is Fifteen Calendar Days (15 Cd) Upon Receipt Of Notice To Proceed (ntp). 7. If Awarded The Contract, Processing Of Payment Shall Be Made Within Five (5) Working Days Upon Receipt Of Billing Request. 8. Refusal To Accept An Award May Be Ground For Imposition Administrative Sanctions Under Rule Xxiii Of The 2016 Revised Irr Of Ra 9184; And 9. Failure Of The Supplier To Deliver Goods And Render Services Under The Contract Within The Specified Delivery Schedule Shall Made Him/her Liable For Damages For The Delay. 10. Subject To The Submission Of The Following Documents: Failure To Submit The Same May Result For A Disqualification Under The Applicable Law. A. Dti/sec Certificate Of Registration B. Income /business Tax Return (abc’s Above 500k) C. Mayor’s /business Permit D. Philgeps Class “a” Platinum Or Philgeps Registration Number E. Omnibus Sworn Statement Notarized (for Abc’s Above 50k) F. Professional License/curriculum Vitae (consulting Services Only) G. Pcab License (infra Project Only H. Request For Quotation (rfq) 11. Price Quotation/s, To Be Denominated In Philippine Peso, Shall Include All Taxes, Duties, And/or Levies Payable Rolando L Cadalin Jr. Authorized Canvasser Dr. Jerald P. Torillo Bac Chairperson To The Bac Chairperson: I Have Read And Understood The Procurement Terms And Conditions Stated Above. By Signing This Quote, I Hereby Agree And Bind Myself To The Above Terms And Conditions. Item # Qty Unit Particular Abc Bid Price Unit Price Total Amount 1 5 Pcs Al Strips 1,000.00 2 10 Pcs Alligator Clip 1,000.00 3 1 Set-up Conductivity Apparatus 10,000.00 4 10 Pcs Cu Strips 5,000.00 5 25 Ml Cuso4 Solution 10,000.00 6 1 Set-up Distillation Apparatus, 1000ml 24/40 Glass Distillation Vacuum Apparatus W/500ml Erlenmeyer Flask 22,000.00 7 25 Ml Electrolyte Solution 15,000.00 8 5 Pcs Evaporating Dish, 100ml Ceramic 4,000.00 9 25 Ml Fe (no3)3 Solution 4,000.00 10 25 Ml Fecl3 Solution 3,000.00 11 5 Pcs Filter Stand 5,000.00 12 5 Pcs Glass Funnel, 90mm 2,000.00 13 5 Pcs Graduated Cylinder, 50ml, 100ml, 250ml, 500ml, 1l 3,000.00 14 80 Ml Hcl Solution 4,500.00 15 25 Ml Hexane, Non Polar Solvent 3,000.00 16 8 Grams I2 Crystals, Granular Form 1,500.00 17 25 Ml Kcl Solution 1,500.00 18 3 Grams Kclo3 Solid, White Crystalline Solid 500.00 19 25 Ml Kmno4 Solution 1,500.00 20 25 Ml Kscn Solution 1,500.00 21 10 Pcs Mg Strips, Thin Strips Of Magnesium Metal; 99% Pure 1,200.00 22 5 Grams Nacl 2,000.00 23 50 Ml Nacl Solution 1,000.00 24 25 Ml Naoh Solution 1,000.00 25 5 Ml Nh4oh Solution, 28% To 30% Concentration 1,000.00 26 50 Ml Pb (no3)2 Solution 3,000.00 27 5 Pcs Pb Strips 500.00 28 5 Pcs Petri Dish 1,000.00 29 20 Pcs Ph Paper 500.00 30 5 Pcs Sand Bag 2,500.00 31 5 Pcs Syringe,1 Ml, 5 Ml, 10 Ml Capacities, Plastic Or Glass 1,000.00 32 5 Pcs Triple Beam Balance, 0.1gram Accuracy, 2kg Capacity 30,000.00 33 5 Grams Urea 1,500.00 34 25 Ml Zn (no3)2 Solution, 0.1 M To 1 M Solutions 2,500.00 35 15 Pcs Zn Strips 3,000.00 36 5 Pcs Filter Paper, Ashless, 90 Mm Diameter 1,000.00 37 5 Pcs Iron Stand And Ring, Adjustable Rings, Corrosion-resistant 9,000.00 38 5 Pcs Tripod, Stainless Steel, Height-adjustable 4,500.00 39 15 Pcs Glass Tubing, Borosilicate Glass, Various Diameters 6,750.00 40 2 Sets Aluminum Foil, 1: Heating Temperature: 350-410 Degrees. 2: Tensile Strength (mpa) "75. 3: Yield Strength (mpa) "35 4: Standard: Gb / T3190-1996 5: Elongation: 3-5 6: Aluminum Content: 99.6% 7: Hb Hardness: 20-35 8: Welding: General 9: Cutting Resistance: Very Good 10: Corrosion Resistance: General. Features : -aluminum 300.00 41 10 Pcs Bar Magnet, 1: Heating Temperature: 350-410 Degrees. 2: Tensile Strength (mpa) "75. 3: Yield Strength (mpa) "35 4: Standard: Gb / T3190-1996 5: Elongation: 3-5 6: Aluminum Content: 99.6% 7: Hb Hardness: 20-35 8: Welding: General 9: Cutting Resistance: Very Good 10: Corrosion Resistance: General. Features : -aluminum 4,000.00 42 5 Pcs Beaker, Material:gg-17 Borosilicate Glass Capacity:250 Ml 750.00 43 5 Pcs Beam Balance, Max. Weight: 2610g Graduation Value: 0.1g Beam Calibrations: 10*0.1g, 100*10g,500*100g Total Capacity Is 2610grams 15,000.00 44 5 Pcs Bread Board, Solderless Breadboard Specifications: Size/dimensions: Mini: 170-400 Points 1,500.00 45 5 Sets Bridging Plugs/connecting Wires, Material: Imported Polycarbonate, Copper Working Voltage: < 36v Max Current: 9a (conductor Without Wire) Workable Wire Type: Solid Wire / Stranded Wire Workable Wire: 22-20awg/0.34 - 0.54 Mm² Flame Retardancy Level: Ul94v-0 Protection Rating: Ip40 Outer Body Cold Resistance: - 45°c Working Temperature: -20°c~80°c Quantities: 10 Pieces Size: Approx. 21.8 * 9.8 * 6.15mm / 0.85 * 0.38 * 0.24in Net Weight: Approx. 9g 2,000.00 46 5 Pcs Clamp, Material: Galvanized Steel Style: Double And Single 1/2" 2,000.00 47 5 Pcs Coil, 10m Nichrome Resistance Wire Nichrome Heating Coil For Heating Machine 0.25mm Features: Nichrome(cr20ni80) Heating Alloy, Temperatures Resistant, Corrosion Resistant. Wire Diameter: 0.25mm/0.01inch; Length: 10m/33ft. 2,000.00 48 5 Pcs Compass, Product Name: High-precision Stainless Steel Multifunctional Metal Compass Material: Stainless Steel Weight: 80g/2.82oz,55g/1.94oz Size: 7.5cm × 7.5cm × 1.4cm/2.95inch × 2.95inch × 0.55inch 6.0cm × 6.0cm × 1.3cm/2.36inch × 2.36inch × 0.51inch 5,000.00 49 15 Pcs Component Holder, The Component Holder Is An Instrument For Holding The Electronic Components Such As Resistors, Capacitors, Leds, Ldrs Etc For The Use In Different Experimental Circuits. With 4 Mm Socket Connectors 2,250.00 50 5 Pcs Concave Lens, Optical Glass Optics Double Concave Lens Great Concave Glass For Spinning Tops Material: Optical Glass Lens Diameter: 10cm Focal Length: -30cm 2,500.00 51 5 Pcs Conducting Paper, Material Composition: Base: Made Of Paper Or Cardboard. Coating: The Conductive Material (such As Graphite, Silver, Or Carbon) Is Typically Applied To The Surface Of The Paper To Provide Conductivity. 5,000.00 52 5 Sets Connecting Wires, 10 Meters Pvc Wire 20awg 1.8mm Pvc Wire Electronic Cable Insulated Led Cable 2,500.00 53 5 Pcs Convex Lens, Material: Optical Glass Color: Transparent Shape: Biconvex Lens Diameter: 25mm Focal Length: 45mm Package Included 2/10 X 25*45mm Biconvex Lens 2,500.00 54 5 Pcs Crossed Arrow Target, Diameter: 40cm Weight: 20g Material: Paper 5,000.00 55 5 Pcs Cylindrical Lens, Product: Cylinder Material: Alloy And Glass. Color: Silver. Overall Length: 70mm/2.76". Lens Dia: 36mm/1.18" 2,500.00 56 5 Pcs Fixed Capacitor (330 Microfarad), 330uf Smd Tantalum Capacitor 2.5 Volts 2,500.00 57 25 Pcs Fixed Resistor (100 Ohms), Features:standard General Purposemaximum Power Dissipation:2wtolerance Rating:±1% 3,000.00 58 5 Pcs Frame For Bar Magnets, The Practical Poster Frame Holder Consists Of A Ferrite Magnet, A Plastic Housing Available In Black Or White And A Horizontal Adapter For Our Special Poster Frames On The Top. The Holder Enables Posters And Advertising Materials To Be Attached Quickly And Flexibly To All Magnetic Surfaces. Thus, In Combination With The Poster Frame, It Is Ideally Suited And The Ideal Aid For The Sales Or Storage Room Of Shops Or On Exhibition Stands. The Holder Is Also Characterized By A Relatively High Adhesive Force. Weight: 43 G / Pcs 5,000.00 59 5 Pcs Galvanometer, Material: Plastic + Electronic Component Sensitive Range: -30-0-30μa Size: 133x97x100mm Accuracy: ≤5% Application: Environment Temperature: 0℃+40℃ Relative Humidity: ≤85% 12,500.00 60 5 Pcs Glass Plate, Specifications: Material: Borosilicate Glass Culture Dishes Size Types:approx 60mm 75mm 90mm 100mm (diameter) 60mm Type Size:approx 56x65x18mm/2.2x2.56x0.71in 75mm Type Size:approx 72x79x17mm/2.83x3.11x0.67in 90mm Type Size:approx 86x96x20mm/3.38x3.78x0.78in 1000mm Type Size:approx 97x106x22mm/3.82x4.17x0.87in 2,500.00 61 5 Pcs Glass Plate Of Size Similar To Friction Board, Size: 4" X 6" Clear Glass Plate; 6" X 8" Clear Glass Plate; 8" X 10" Clear Glass Plate 1,500.00 62 5 Pcs Hanging Mass, Contains 4 50g Weights And A 50g Hanger Weights Are Slotted To Fit And Lock On To The Hanger Slot Is Approximately 2mm Wide 1,500.00 63 5 Pcs Horseshoe Magnets, Material: Alnico; Dimension: 25mm L X 9x9mm 5,000.00 64 5 Pcs Hydrometer Jar, Body Color : Clearbottle/jar Shape: Cylindricaldiameter: 50 Mmheight : 375 Mmlabware Basic Material : Glasslabware Capacity : 600 Mlmouth : Wide 5,000.00 65 5 Pcs Inclined Plane, Material: Alloy Steel Style : Modern Power Source: Manual Product Dimensions : 24.4 X 7.5 X 2.4 Inches (62 X 19.1 X 6.1 Cm); 6 Pounds (2.72 Kg) 25,000.00 66 5 Pcs Inverted U-tube, Made Of Stainless Steel 304 1.5mm Thickness 2” Diameter Rd. Tube , 180 Deg. U Shaped 30cm Outside Diameter - Width Mandrel Bend Mirror Finished 15,000.00 67 5 Sets Iron Fillings, Iron, Filings, 40 Mesh, Laboratory Grade, 500 G 1,000.00 68 5 Sets Jumper, Jumper Cable 10/15/20/30 Cm. 40p Pam Wire Bread Board Rehearsal 2.54mm Dupont Line 1,000.00 69 15 Pcs Light Source, Sodium/mercury Lamps, High Pressure Sodium Lamp Plant Lighting Growing Lamp Bulb Yellow High Efficiency 220v E27 E40 70w 100w 250w 400w 1000w; 125w160w250w500w Self-ballasted Mercury Lamp Mercury Lamp Fluorescent Lamp 15,000.00 70 5 Pcs Mass With Hook, Solid Chrome Plated Metal, Durable To Use; 200g Per Double Hook Weight. The Weights Are Easy To Move And Have Hooks On Both Sides For Attaching Extra Weight. 4,000.00 71 5 Sets Masses, Stainless Steel Anti-oxidation: Contains Different Masses (1g-100g) 6,000.00 72 5 Pcs Metal Ball Of Different Sizes, Name: Steel Ballmaterial: 304 Stainless Steelsurface: Polished Processspecification: 1mm 1.2mm 1.5mm 1.588mm 1.8mm 2mm 2.381mm 2.5mm 2.778mm 3mm 3.175mm 3.5mm 3.969mm 4.5mm 4.763mm 5mm 5.556mm 6mm 6.35mm 6.5mm 7mm 7.144mm 7.5mm 8mm 8.5 Mm 9mm 9.525mm 10mm 11mm 12mm 3,500.00 73 2 Sets Metal Conductor With Insulated Handle, Specification: Size: 16awg~24awg Ul1015 Length: 10meters Raged Voltage: 600v Temperature Resistance: 105deg.c Conductor Material:tinned Copper Insulation Material:pvc It Will Be A Single Cut If Order 2 Or More Pcs Features: Wire Core Is Composed Of Many Strands Of Tinned Copper Wire, External Insulation Consists Of Pvc. 2,000.00 74 5 Pcs Metal Stand, Load Capacity: Should Be Capable Of Holding Weights Or Apparatus (up To 5–10 Kg) Securely. Height: Adjustable Height To Accommodate Apparatus Like A Rotating Drum Or Calorimeter. Corrosion Resistance: Essential For Experiments Involving Liquids Or High Humidity. Flexibility: The Stand Should Allow For Easy Attachment And Adjustment Of Clamps For Precise Alignment. 10,000.00 75 5 Pcs Metal Stick, 150 X 10 Mm Dia. 1,000.00 76 5 Pcs Micrometer Caliper, High Precision: The Precision Is 0.02mm Multi Function: Metric Thickness Is Included Between 0 And 6 Inches / 150 Mm. It Can Measure Outer Diameter, Inner Diameter, Depth And Pitch Value Of Exquisite Item, A Multifunctional Tool For You. Measurement Range: 0 - 150mm 5,000.00 77 5 Pcs Mohr-westpal Balance, Plummet Volume: Pre-calibrated To Displace A Known Volume Of Liquid. Weight Accuracy: Typically To The Nearest 0.001 G. Scale Range: Usually Measures Specific Gravity Values From 0.7 To 2.0 Or More. Material: Corrosion-resistant Materials For Durability. 20,000.00 78 5 Pcs Mounted Straight Wire, Wire Material: Copper Or Aluminum, Chosen For Their Excellent Electrical Conductivity.wire Gauge: Typically 20 To 22 Awg (american Wire Gauge) For Manageable Current Handling And Ease Of Manipulation.length: Varies Based On Experimental Requirements; Common Lengths Range From 1 Meter To Several Meters.mounting Base: Non-magnetic Materials Such As Acrylic Or Pvc To Prevent Interference With The Magnetic Field. 2,500.00 79 5 Pcs Natural Magnets, Material: Magnetite (fe₃o₄), A Naturally Occurring Iron Oxide. Magnetic Strength: Generally Weaker Than Synthetic Magnets Like Neodymium Or Samarium-cobalt. Shape: Typically Irregular, As They Are Naturally Formed. Size: Varies; Small Specimens Suitable For Display Or Study Are Common. 2,500.00 80 5 Pcs Parallel Ray Lens, Lens Shape: Plano-convex Surface Quality: 60-40 Scratch-dig Surface Flatness: Λ/8 Surface Accuracy: 1.5 Λ Chamfers Angle/tolerance: 45° ±15° Material: Germanium Clear Aperture: ≥central 90% Of Surface Area 15,000.00 81 5 Pcs Ray Optics Mirror, 1x Double-convex Lens 1x Double-concave Lens 1x Acrylic Trapezoid 1x Triangular Mirror Accessory With Concave, Convex, And Plane Reflective Surfaces 1x Hollow Lens To Fill With A Liquid Or Use As An Air Lens. 1x Storage Box/water Tank With Foam Insert And White Plastic Sheet 12,500.00 82 10 Pcs Resistors,m Type: Fixed Resistor (0ω, 22ω, 47ω, 100ω, 150ω, 200ω, 220ω, 270ω, 330ω, 470ω, 510ω, 680ω, 1kω, 2kω, 2.2kω, 3.3kω, 4.7kω, 5.1kω, 6.8kω, 10kω, 20kω, 47kω, 51kω, 68kω, 100kω, 220kω, 300kω, 470kω, 680kω, 1m)resistance Tolerance: 1%technology: Cermetcolor: Blueoperating Temperature: -20-+85temperature Coefficient: -20-+85model Number: 10r 22r 47r 100r 150r 200r 220r 270r 330rrated Power: 1/4w 2,000.00 83 5 Pcs Reversing Switch, Within Dc220v High Current: 15a Rated Current: 10a High Power: 250w This Product Can Manually Control Brush Dc Motor Forward, Stop, Reverse Function. 2,500.00 84 5 Pcs Ring, Ring Clamps (or Iron Rings) Are Also Commonly Used In The Organic Lab. They Are Used To Hold Separatory Funnels, And Can Be Used To Secure Funnels When Filtering Or Pouring Liquids Into Narrow Joints. Size: 100mm; 120mm; 140mm; 60mm;80mm 2,000.00 85 5 Sets Rubber Hammer, Dimension: *small - Weight: 240g - Length: 9in - Head Diameter: 5cm - Head Length: 8cm *medium - Weight: 390g - Length: 11in - Head Diameter: 6cm - Head Length: 9cm *large - Weight: 785g - Length: 13in - Head Diameter: 7cm - Head Length: 11cm Material: Rubber Mallet With Wooden Handle 5,000.00 86 5 Sets Set Of Weights, Name:calibration Weight Set Size:as Show Material:steel Package:10g、20g、50g、100g、200g、500g 5,000.00 87 5 Pcs Slit Mask, Aperture Size: Diameter 1mm Hole, 2 Pieces, Black Anodizing Finishing, Sensing Range 180 Mm (gse2s) And 198 Mm (wse2s) 10,000.00 88 5 Pcs Slit Plate, Material: Molybdenum; Size 150 X 1 Mm(t), Various Sizes Of Slits 10,000.00 89 5 Sets Slotted Masses, 5-500g, 2 X Slotted Masses(200g) 2 X Slotted Masses(100g) 2 X Slotted Masses(50g) 2 X Slotted Masses(20g) 2 X Slotted Masses(10g) 2 X Slotted Masses(5g) 3 X Slotted Masses( 2g) 2 X Hangers 1 X Box 4,000.00 90 5 Pcs Solenoid, Current Characteristics : Direct; Recommended Power On Time: Within 5 Secondstrip : 10mm12v: Current: 2a, Suction: 4n24v: Current: .300ma, Suction: 4n1.a Framework: High Quality Low Carbon Steel, A Integrated, Remanence Little White Zinc Plating, Beautiful And Corrosion Resistance2.coilnational Standard Copper Electromagnetic Wire, Mechanical Automation Winding; The Iron Core: Pure Iron Core, The Demagnetization Heat Treatment, Magnetic Force Is Stronger; Spring/card/nut: Using 304 Stainless Steel, Durable; Copper Wire: High-temperature Tin Plated Copper Wire, Oxidation Resistance, Low Resistance Can Withstand High Tension, Two Lines Of Both Positive And Negative 2,500.00 91 5 Pcs Spark Timer/ticker Timer, Material: Metal Package Weight: Approx.490g Size: Approx.15x15x4cm/5.90x5.90x1.57in 12,500.00 92 5 Pcs Spdt Switch, Ac 250v/3a 125v/5a Momentary Spdt 3 Positions Toggle Switch T80-r 1,250.00 93 5 Sets Specimen For Shot, 60 Ml Capacity 750.00 94 5 Pcs Spherical Mirror, Diameter: 45cm、60cm、80cm Mirror Curvature: 130 Degrees Style: Indoor、outdoor 12,500.00 95 5 Pcs Spring, Compression Springs, Return Springs, Carbon Steel Nickel Plated Compression Springs; Color: Nickel Color ; Size: Wire Diameter 1.1mm*outer Diameter 15mm*length 40mm*9 Turns 1,250.00 96 15 Pcs Spring Balance, Metal Spring Balance Sizes: 12kg,25kg,50kg 5,250.00 97 5 Pcs Spst Switch, *name: Rocker Switch *material: Plastic + Metal *color: Black (as Pictures Show) *voltage: Dc 12v,16a *ports: 2 Pins *spst: On-off *dimension: 10*15mm/0.4*0.6 Inch (approx.); Spst On-off Control And 2 Terminals 150.00 98 5 Pcs Stirrer For Shot, Glass Stirring Rod Made From High Quality Borosilicate Glass Suitable For Mixing Reagents And Solutions In The Laboratory. Can Also Be Used In Mixing Formulations In The Cosmetics, Pharma, Etc. Available Sizes: 1. 30 Cm ± 1 Cm (diameter: 6 Mm) 2. 20 Cm ± 1 Cm (diameter: 6 Mm) 3. 15 Cm ± 1 Cm (diameter: 6 Mm) Sold Per Piece. Kindly Allow Measurement Difference Of +/- 1 Cm. 500.00 99 5 Pcs Stopwatch, Package Size: 9.3x2.6x14cm / Package Weight: 40g Body Weight: (approximately) 60 G Material: Resin Functions: Countdown Timer (maximum Set: 99 Hours 59 Minutes 59 Seconds), 4 Timers, Count Up (maximum Measurement Time: 99 Hours 59 Minutes 59 Seconds), Time Display, Magnet, Clip For Stand, 12/24 Hour System Display Switching Power Supply: Alkaline Button Cell Battery (lr44) X 1 (battery Life Approx. 1 Year) 2,500.00 100 5 Pcs Spring, Compression Springs, Return Springs, Carbon Steel Nickel Plated Compression Springs; Color: Nickel Color ; Size: Wire Diameter 1.1mm*outer Diameter 15mm*length 40mm*9 Turns 1,250.00 101 5 Pcs String, Withstands Up To 133 Newtons Of Force (equivalent To 13.6 Kg). 5,000.00 102 5 Pcs Support Rod, Material:aluminum Alloy Type:silver Hood Support,brown Hood Support,nylon Rope Hood Support Length:approx.40.5cm/15.94''-63cm/24.8'' 2,500.00 103 2 Sets Tesla Meter/tangent Galvanometer, Level 1 Technical Specificationsrange :200 Mt 2000 Mt (full Automatic Range Switching)measurement Range: 0 ~ 2400mt 0 To 24000gs (1mt=10gs)range Of Measurements:0 ~ 120%minimum Resolution :10ut 4 Digits Display (0.1gs 0.01mt 10ut)basic Accuracy :±1% (full Range Meets)number Of Digits Displayed :4 Bits (decimal)power Supply :one 9 V Battery(battery Not Included)working Temperature :0℃ ~ 50℃storage Temperature :-20℃ ~ 50℃shape Size :160 Mm × 80 Mm × 32 Mmdevice Weight :260 G (including Batteries And Wires)hall Probe Longitudinal Hall Probe, Wire Length Is About 2 Meters 30,000.00 104 5 Pcs Thermometer, Laboratory-grade, Precision ±0.1°c 2,500.00 105 5 Pcs Tuning Forks Of Three Different Frequencies , Tuning Fork Set - 128hz, 256hz, 512hz 7,500.00 106 5 Pcs Vernier Caliper, Measuring Range: 0–150 Mm / 0–6 Inch Resolution: 0.01mm/0.0004" Accuracy: +0.04mm/0.0016" Tolerance: The 0.04mm Battery: 1 * Lr44 Button Battery(not Included) Material: 4cr13 Stainless Steel Header Material : Abs Plastic Size:236mm/9.2in * 77mm/3in * 15mm/0.59in Package Informations: Package Size:230*80*20mm/8.97*3.12*0.78in Package Weight:290g/10.15oz 2,500.00 107 5 Pcs Vom Or Multitester, Lcd Display 1999 Counts Dc Voltage: 200mv/2v/20v/200v/600v Ac Voltage: 200v/600v Dc Current: 200ua/2ma/200ma/10a Dimension : 7 X 5 X 15 Cm (l*w*h) 2pcs Battery 1pc Negative Probe 5,000.00 108 5 Pcs Weight Holder, Material: Stainless Steel Or Brass Design: Features Hooks Or Slots For Attaching Weights, With Adjustable Components To Accommodate Various Weight Sizes.capacity: 5g-1kg 2,500.00 109 5 Pcs Wooden Cart, Material: Solid Wood (often Hardwood Like Oak Or Maple) Or A Wood Composite (e.g., Plywood); Load Capacity: Varies By Model; Some Carts Can Support Up To 440 Lbs. Dimensions: Common Sizes Include 30" W X 18" D X 30" H. Wheels: Heavy-duty Wheels, Often Made Of Pp (polypropylene) Or Rubber, For Easy Maneuverability. 22,500.00 110 5 Pcs Clamps, Adjustable Metal Or Plastic Devices With A Maximum Opening Range Of 10–50 Mm, Used To Securely Hold Apparatus Or Objects During Experiments. 1,250.00 111 5 Pcs Plane Board With Stand, A Flat Board (50 Cm X 50 Cm To 100 Cm X 100 Cm) Mounted On An Adjustable Stand (50 Cm To 150 Cm Height), Used For Holding Or Displaying Experimental Setups. 25,000.00 112 5 Sets Specimen Liquid, A Liquid Sample Used In Experiments For Studying Properties Like Density Or Viscosity, Typically Measured In Milliliters (ml). 3,000.00 113 5 Pcs U-tube, Length Of Arms: 200 Mm Stand Rod: 33 Mm X 10 Mm Dia Base Plate: 210x70 Mm Approx 30,000.00 114 1 Box Copper Wire, 3.5 Sq.mm Thhn Wire 3,500.00 115 1 Box Copper Wire, 5.5 Sq. Mm Thhn Wire 4,000.00 116 50 Unit Complete Set Of Netwrok Cable Fabrication Tools, Cat 5e/cat 6 Ethernet Cable, Cable Tester, Wire Stripper, Crimping Tool, Rj45 Connector(plastic, Standard, 9v Battery) 15,000.00 Please Fill-out This Portion Legibly And Completely: Name Of Business Or Firm: _________________________________________________________________ Authorized Representative: _______________________________________ Date: ___________________________ Signature Over Printed Name Position In Firm: ________________________________________________ Contact Number: _________________ Business Address: _________________________________________________________________________________
Closing Soon26 Feb 2025
Tender AmountPHP 648.9 K (USD 11.2 K)
Municipality Of Carmen, Bohol Tender
Telecommunication Services
Philippines
Details: Description 1 Satellite Internet Equipment 1 Unit Satellite Feed Internet Wifi 6 Triband 4x4 Mu-mimo Weight: 2.7 Kg. Devices: Connect Up To 235 Devices Warranty: 6 Months With Complete Accessories 2 Ac Output: 2000w To 2400w 1 Unit Capacity: 2016wh Weight: 20-22kg. Battery: Lifepo4 (3000 Cycle 8-10 Yrs.) Warranty: 5 Yrs. Charging Time: Grid Power: 1.6 Hrs. Solar Power: 3-6 Hrs. Depending On Weather Car Charger: 21 Hrs. (96w) With 2 Pieces Solar Panel 400w With Accessories
Closing Date4 Mar 2025
Tender AmountPHP 230.5 K (USD 3.9 K)
VETERANS AFFAIRS, DEPARTMENT OF USA Tender
Others
United States
Details: This Is A Sources Sought Notice Only. The Purpose Of This Sources Sought Notice Is To Obtain Information Regarding The Availability And Capability Of All Qualified Sources To Perform A Potential Requirement, And To Gain Knowledge Of Potential Qualified Service-disabled Veteran Owned Small Business (sdvosb), Veteran Owned Small Business (vosb), Other Small Businesses Interested And Capable Of Providing Items Requested, As Well As Any Large Business Interested And Capable. This Request For Information/sources Sought Notice In Support Of The Portland Va Healthcare System, Is For Market Research And Planning Purposes Only And Is Not To Be Construed As A Commitment By The Government. The Government Will Not Pay For Information Solicited. Respondents Will Not Be Notified Of The Results Of The Evaluation. Results Will Be Used To Determine Set-aside.
the Intended Contract Is A Firm-fixed Price Supply Purchase.
the Sba Non-manufacturer Rule Is Applicable, And A Waiver Will Not Be Sought For This Potential Acquisition.
potential Contractors Shall Provide, At A Minimum, The Following Information:
1) Company Name, Address, And Point Of Contact, Phone Number, E-mail Address, And Sam.gov Uei Number/code.
2) Anticipated North American Industry Classification System (naics) Code Is 334510. The Largest A Firm Can Be And Still Qualify As A Small Business For Federal Government Programs Is No More Than 1250 Employees. Please Indicate Whether You Are A Small Business, Sdvosb, Vosb, Small Business Manufacturer, Other Small Business, Or Large Business, And Whether You Are The Manufacturer Of The Items Listed Below.
3) The Government Is Not Obligated To, Nor Will It Pay For Or Reimburse Any Costs Associated With Responding To This Sources Sought Notice. This Notice Shall Not Be Construed As A Commitment By The Government To Issue A Solicitation Or Ultimately Award A Contract, Nor Does It Restrict The Government To A Particular Acquisition Approach. The Government Will In No Way Be Bound To This Information If Any Solicitation Is Issued. Notice To Potential Offerors: All Offerors Who Provide Goods Or Services To The United States Federal Government Must Be Registered In The System Award Management (sam Located On The Web At Www.sam.gov). It Is Desirable That Any Offeror To Have Completed Their Business Online Representations And Certifications Application In The System For Award Management (sam).
4) Any Service-disabled Veteran Owned Businesses Or Veteran Owned Businesses Who Respond To A Solicitation On This Project Must Be Registered With The Small Business Administration Vetcert Registry Located At Https://veterans.certify.sba.gov.
5) If Not A Manufacturer, Only Authorized Representatives/providers/distributors Of The Manufacturer Will Be Considered. Equipment Must Be New, No Used Or Refurbished Equipment Accepted. Please Provide A Proof Of Authorized Dealer Or Reseller Letter From Manufacturer.
6) If You Are The Manufacturer, Do You Have Any Designated Or Authorized Distributors? If So, Please Provide Their Name, Telephone, Point Of Contact And Size Status (if Available).
7) This Is A Brand Name Or Equal Requirement. As Such, The Salient Characteristics Reflect The Physical, Functional, Or Performance Characteristics That Equal Products Must Meet To Satisfy The Government S Needs. To Be Considered For Any Potential Solicitation, Offers Of Equal Products, Including Equal Products Of The Brand Name Manufacturer, Must:
(a) Meet The Salient Physical, Functional, Or Performance Characteristic Of The Item And Those Specified In This Sources Sought; Clearly Identify The Item By Brand Name, If Any And Make/model Number.
(b) Include Descriptive Literature Such As Illustrations, Drawings, Or A Clear Reference To Descriptive Data Or Information Available That Identifies That The Equal Item Meets Or Exceeds The Salient Characteristics Required By The Government.
(c) Identify The Manufacturer Name (oem) And Manufacturer Part Number, As Well As Any Warranty Information.
(d) Please Provide A Courtesy Quote In Response To This Request To Evaluate Price Reasonableness For Any Set-aside Determination, And Any Applicable Contract Vehicle Information.
8) Please Identify The Country Of Origin For All Items.
it Is The Intent Of The Va To Use The Information Gathered For Market Research Purposes Only. If A Formal Solicitation Is Released, It Will Be Posted Via The Contracting Opportunities Website Located At Sam.gov Or Gsa Ebuy.
description Of The Requirement:
the Department Of Veterans Affairs Is Looking To Obtain Information On Vendors Who Can Provide The Products And Services As Outlined Below. This Is An Unrestricted/open Market Brand Name Or Equal To Request For Information/sources Sought Notice.
delivery Address:
portland Va Medical Center
3710 Sw U.s. Veterans Hospital Rd.
portland, Wa 97239-2964
items:
brand Name Or Equal To:
biwaze Clear System, Home Care W/remote Setup
biwazecough, Mobile Cart For Acute, Post-acute, Clinical Environments
quantity
manufacturer Part #
description
price
3
bk367-rs
biwaze Clear System, Home Care W/remote Setup
3
bc22506
biwazecough, Mobile Cart For Acute, Post-acute, Clinical Environments
total
the Proposal Price Shall Include All Costs Associated With The Delivery, Installation, Setup, And Integration.
salient Characteristics:
brand Name Or Equal To Biwaze Clear System For Home Care, Item # Bk367-rs
biwaze Clear System Provides Oscillating Lung Expansion (ole) Therapy To Help Treat And Prevent Atelectasis, Remove Retained Secretions From Deep In The Lungs And Reduce Work Of Breathing.
positive Expiratory Pressure (pep): During Pep, The System Delivers A Programmed Positive Pressure Which The Patient Exhales Against To Open And Expand The Patient S Airways. The Nebulizer Can Be Configured To Run During Pep Therapy To Help Move The Saline Throughout The Airways.
oscillation (osc): During Osc, The System Oscillates The Airways With Pulses Of Positive Pressure To Thin Secretions And Mobilize Them From The Lower Airways To The Upper Airways So They Can Be Coughed Or Sectioned Out. The Nebulizer Can Be Configured To Run During Osc Therapy To Help Move The Saline Solution Throughout The Airways.
nebulize (neb): During Neb, The System Powers Only The Aerogen Solo Vibration Mesh Nebulizer. This Therapy Give The Patient A Break From Pep Or Osc While The Patient Receives Their Nebulized Saline.
operating Temperature: 40 To 95 F (5c To 35c)
relative Humidity: 15 To 90% (non-condensing)
size: Similar To 27 Cm L X 23.5 Cm W X 9.0 Cm H (10.5 L X 9.2 W X 3.5 H)
weight: Similar To 9.4 Lbs (4.1 Kg) Including Battery
pep Pressure: 1 To 30 Cm H20
osc Pressure: 5 To 70 Cm H20
neb Pressure: 1 Cm H20
oscillation Frequency: Low, Med, High
phase / Stage Duration: 00:05 To 30:00 Minutes
modes: Auto / Manual
battery: Included
number Of Therapies Per Battery Charge: Similar To 10
must Meet All Required Federal Mandates For Medical Use
ac Voltage Source 100 To 240vac, 50/60 Hz
ac Power Supply Input: 100-240 V, 50/60 Hz, 2.0-1.0a
type Of Protection Against Electric Shock: Class Ii
degree Of Protection Against Electric Shock: Type Bf Applied Part
patient Applied Part: Face Mask, Mouthpiece And Trach Adapter
degree Of Protection Against Ingress: Exposure Protection, Ip21
wifi Capable
brand Name Or Equal To Biwazecough, Mobile Cart For Acute, Post-acute, Clinical Environments, Item # Bc22506
mobile Cart With Basket, Telescoping Pole And Locking Caster Wheels.
must Be Compatible With Biwaze Clear System For Home Care Item # Bk367-rs Or Equal Product.
must Meet All Required Federal Mandates For Medical Use.
if Your Business Is Interested And Capable, Please Send The Capability Statement Outlined Above, And A Courtesy Market Research Quote To Christian.bianchi2@va.gov By 10:00 Am Pst On March 06, 2025. No Phone Calls, Please.
again, This Is Not A Request For Quote, And No Solicitation Is Available At This Time.
Closing Date6 Mar 2025
Tender AmountRefer Documents
11-20 of 3454 active Tenders