Architecture Tenders

Details: Tenderers Are Invited To Apply For Participation In A Dynamic Purchasing System Which Shall Cover The Norwegian Maritime Authority's Needs For It Consultants For The It Area - Consultants - Developer And Tech Lead. Below We Have Outlined Tasks That Will Be Relevant For Advisory And Assistance, As Well As Relevant Requirements For Experience And Competence. The Overview Is Not Complete. The Requirements Can And Will Be Specified For The Individual Contest That Is Carried Out Under The Dynamic Purchasing System. Requests For Tenders Includes I.a The Following • Service And Application Development • Code Administration • Technology And System Consultancy Services • Integration And Api Development We Request Competence And Experience In: • Standards For Information Modelling And Information Exchange • Full Stack Development - Work With Everything From Front End And Rest Apis To Back End Integration And Database • Operation, Provisioning And Monitoring Of Cloud Infrastructure • Automation, Configuration Management, Continuous Integration & Deploy • Container Technology And Micro-service Architecture • Flexible Development, Continuous Integration And Devops. The Procurement Is Related To A Project And/or Programme Financed By European Union Funds: No

Details: Tenderers Are Invited To Apply For Participation In A Dynamic Purchasing System Which Shall Cover The Norwegian Maritime Authority's Needs For It Consultants For The It Area - Consultants - It - Team/group Through This System, The Norwegian Maritime Authority Is Seeking Tenderers With The Capacity And Competence To Provide A Large Number Of Resources In A Group Or Team, Split Between One Or More Of The Roles Defined Below: Developers And Tech Lead Test And Test Lead User Experience Analytics, Machine Learning And Data Administration It - Security And Architecture Project Management And Team Lead Strategic Consultancy And Quality Assurance. The Procurement Is Related To A Project And/or Programme Financed By European Union Funds: No

Details: Tenderers Are Invited To Apply For Participation In A Dynamic Purchasing System Which Shall Cover The Norwegian Maritime Authority's Needs For It Consultants For The It Area - Consultants - It - Security And Architecture. The Dynamic Purchasing System Must Cover Advisory And Assistance Services For The Norwegian Maritime Authority's Internal System Architects In Accordance With Requirements. Currently, The Architects Have The Principal Liability For The Norwegian Maritime Authority's Digital Framework. This Includes Internally And Externally Developed Professional Systems, The Applied Technology And Maintenance Of The Systems' Documentation. The Architects Are Also Administrators Of The Norwegian Maritime Authority's Architectural Principles And Governance Documents. The Overview Is Not Complete. The Requirements Can And Will Be Specified For The Individual Contest That Is Carried Out Under The Dynamic Purchasing System. We Request Consultants With Experience And Competence In: • It Architecture • System Architecture • Functional Architecture • Integration Architecture • Security Architecture. The Procurement Is Related To A Project And/or Programme Financed By European Union Funds: No

Details: The Contract Will Cover The Contracting Authority’s Need For Competence That Is Not Available In Its Own Business, Or Where There Is A Need For An Independent External Task Solution. The Contracts Can Also Be Used If Extra Capacity And Transfer Of Competence Are Needed. The Relevant Competence Areas Are As Follows: A: consultancy B: architecture C: project Management D: infrastructure E: system Development F: information Security. The Procurement Is Related To A Project And/or Programme Financed By European Union Funds: No

Description: Consulting Services - Business Architecture

Details: Announcement of competition: dynamic purchasing scheme consulting services business development in the ict area Dynamic purchasing scheme consultant in: ict governance, business development, innovation and architecture. • strategic consulting in ict and it architecture. • concept study • profit realization • analyzes, including socio-economic analyzes and praise analyzes • risk analysis and quality assurance Information about subcontracts This procurement is divided into subcontracts: no Languages such as offers or requests for participation can be submitted to Norsk Eligibility Criteria : qualification requirements overview and brief description of qualification requirements: see tender documents minimum requirements: see tender documents contract terms

Details: Announcement of competition: dynamic purchasing scheme consulting services within information security. This scheme shall cover assistance and advice in the field of information security. it includes, but is not limited to, the following sub-areas: • it and information security, including consulting, management system / internal control, privacy, compliance with legal requirements, etc. • risk assessments and management • security-specific testing, including penetration testing, vulnerability scanning, etc. • security architecture .Suppliers shall briefly document which listed subject areas they have competence in within the area. Information about subcontracts This procurement is divided into subcontracts: no Languages such as offers or requests for participation can be submitted to Norsk Eligibility Criteria : qualification requirements overview and brief description of qualification requirements: see tender documentsminimum requirements: see tender documentscontract terms

Details: Advanced Research Announcement (ara) fa9451-21-s-0001 directed Energy Technology Experimentation Research (deter) air Force Research Laboratory/directed Energy Directorate naics Code: The Naics Code For This Acquisition Is 541715 For Research And Development In The Physical, Engineering, And Life Sciences (except Nanotechnology And Biotechnology), And The Small Business Size Standard Is 1,000 Employees federal Agency Name: Air Force Research Laboratory, Directed Energy, Phillips Research Site, Kirtland Afb Nm (afrl/rd) ara Title: Directed Energy Technology Experimentation Research Announcement (deter) ara Type: This Is An Open Ara With Calls; Initial Announcement ara Number: Fa9451-21-s-0001 program Summary: this Is An Open Ara Announcement Pursuant To The Authority Of 10 U.s.c. §4023 (formerly 10 U.s.c. §2373). Afrl/rd Is Interested In Receiving White Papers And Proposals Through A Two-step Process To Perform Research And Development (r&d), Modeling And Simulation (m&s), Design, Component/subsystem, Prototype Risk Reduction, Fabrication/purchase, Assembly, Integration, And Testing Of Directed Energy Source Components (to Include Spares And Alternate Component Technologies), And/or Systems And Any Required Accessories, Materials, And Supplies For Laboratory Research And Experimentation And Field Trials In A Relevant Environment To Demonstrate System Capabilities. Dialogue Between Prospective Offerors And Government Representatives Is Strongly Encouraged. *note: Afrl/rd Reserves The Right To Collapse A White Paper/two-step Into A One-step If The Situation Warrants The White Paper Contains Sufficient Technical Detail To Do Full Technical Proposal Evaluation Instead Of White Paper Evaluation. *please See The Attached Deter Industry User Guide For Guidance On Definitions, Processes, Submission Requirements And Evaluation Criteria.* background: Afrl/rd Equips The Joint Warfighter With Next-generation Technologies, Advanced Concepts, And Weapon System Options Across All Operational Domains To Become More Agile And Increase The Commercialization Potential Of Directed Energy Investments To Ensure The National Defense. this Solicitation Intends To Use Acquisition Authorities Provided By 10 U.s.c. §4023 (formerly 10 U.s.c. §2373). This Authority Applies To Acquisition Of Items Related To “…ordnance, Signal, Chemical Activity, Transportation, Energy, Medical, Space-flight, And Aeronautical Supplies, Including Parts And Accessories, And Designs Thereof, That Are Necessary For Experimental Or Test Purposes In The Development Of The Best Supplies That Are Needed For The National Defense.” Consequently, White Papers And Proposals Should Address How The Proposed Effort Provides Benefits To The National Defense And A Strategy For Verifying Those Intended Benefits. the Proposed Solutions Should Be Innovative And Substantially Improve National Defense Capabilities Across The Domains Of Directed Energy. While The Government Describes Discrete Topic Areas Below, It Also Anticipates That Certain Comprehensive Technology Solutions And Prototypes May Require Multidiscipline Approaches That Address Two Or More Topic Areas. The Topic Areas Are Covered Under This Announcement, Which May Be Used In Any Combination. The Government Reserves The Right To Add, Delete Or Modify The Topic Areas As Necessary. communication Between Prospective Offerors And Government Representatives: Dialogue Between Prospective Offerors And Government Representatives Is Strongly Encouraged Throughout The Life Of This Ara. However, Communication Will Be Limited Once Full-proposals Are Submitted For Evaluation/review. Prospective Offerors Are Welcome To Request Sit-downs And Provide Demonstrations Of Their Capabilities. Discussions Shall Not Constitute A Commitment By The Government To Subsequently Fund Or Award Any Proposed Effort. No Guidance Related To Technical Approach Will Be Given. However, Questions Related To The Objectives Of The Effort Or Prior Similar Efforts May Be Answered. Offerors Are Advised That Only Contracting Officers Are Legally Authorized To Contractually Bind Or Otherwise Commit The Government. this Will Be A Hybrid Announcement: This Announcement Has An Open Request For White Papers As Described Below. Calls May Be Issued Under This Announcement For Discrete Requirements. Call Types Can Vary And May Include, But Are Not Limited To, One-step, Two-step, Open, Closed, Staggered, Limited Calls Or Any Combination Therein. Afrl/rd Reserves The Right To Collapse A White Paper/two-step Into A One-step If The Situation Warrants The White Paper Contains Sufficient Technical Detail To Do Full Technical Proposal Evaluation Instead Of White Paper Evaluation. open Announcement Request: Afrl/rd Kirtland Air Force Base Is Soliciting White Papers On The Research Effort Described In The Below Topic Areas Pursuant To The Authority Of 10 U.s.c. §4023 (formerly 10 U.s.c. §2373), Procurement For Experimental Purposes. open Announcement Submission: White Papers Must Be Submitted To Https://usg.valideval.com/teams/deter/signup. If It Is Determined That A Classified White Paper Is Required, Please Do Not Deliver Any Classified Portion Of The White Paper, But Rather Contact The Deter Org Mailbox For Specific Delivery Instructions. Further Instructions For White Paper Submission Can Be Found In The Deter Industry User Guide Attached To This Announcement. call Request: Calls, Other Than Limited Calls, Will Be Issued Under This Announcement Via The Government Point Of Entry (gpe) At Https://beta.sam.gov. Notification Of Calls May Be Announced On Other Platforms (i.e. Www.grants.gov) And Will Direct Offerors To The Gpe For Full Solicitation Details. call Submission: Submission Requirements For Calls Will Be Specified In The Solicitation Documentation Of Each Call. call Variations: Variations Of The Ara Call Process Are Available For Use. The Following Types Are Commonly Used, But Are Not Considered All Inclusive. one-step: The One-step Process Is Used To Request Full Technical And Cost Proposals From Each Offeror. The Proposals Are Reviewed In Accordance With The Solicitation Criteria And Typically All Of A Selected Proposal, Part Of A Selected Proposal, Or None Of The Proposals May Be Selected For Award. two-step: The Two-step Process Is Sometimes Used When A Large Number Of Proposals Are Anticipated. Potential Offerors Are Invited To Submit Brief Descriptive White Papers In Lieu Of Full Proposals. The Call Must State Whether An Unfavorable White Paper Review Will Bar The Offeror From Further Consideration. The Government May Retain Unselected White Papers For A Specific Period Of Time, Which Will Be Identified In The Solicitation. Full Proposals Are Requested From Those Offerors Selected In The White Paper Review Process. After Proposals Are Received, They Are Reviewed Consistent With The Process For One-step Aras. open Call: This Approach Allows For White Paper And/or Proposal Submittals At Any Time Within A Specified Period. Open Calls Will Be Updated No Less Frequently Than Annually. White Papers/proposals Are Reviewed When Received During The Period That The Ara Is Open. closed Call: This Approach Allows For White Paper And/or Proposal Submittals At A Specified Date And Time As Set Forth In The Ara. staggered-closed Call: The Staggered-closed Call States A Specified Date And Time For Receipt Of Proposals Or White Papers, But Also Allows For Proposals/white Papers After The Date And Time Set For Proposal Receipt. All Offerors Should Be Cautioned, However, That The Likelihood Of Funding Proposals Received After The Specified Date And Time Is Substantially Reduced. limited Call: This Approach Allows For Solicitation To A Limited Group Of Potential Offerors. Request For Proposals (rfp) Or Requests For White Papers Will Be Issued Directly To Potential Offerors Without A Requirement To Publish To The Gpe. the Government May Issue Solicitations That Combine One Or More Of The Above Approaches. open Announcement Modifications: Due To The Dynamically Evolving Nature Of Us Warfighter Directed Energy Needs, This Announcement Is Subject To Updates, Revisions, Or Additional Topic Areas. Therefore, Offerors Are Highly Encouraged To Continually Monitor Https://beta.sam.gov To Ensure They Receive The Latest Guidance For This Announcement. The Government Shall Provide Updates To This Announcement No Less Than Annually. Updates May Include Changes To: Topic Areas, Submission Requirements, Administrative Changes, Evaluation Criteria, Solicitation Methods, Etc. (not An Inclusive List). type Of Contract/instrument: The Air Force Reserves The Right To Award The Instrument Best Suited To The Nature Of The Research Proposed. Accordingly, The Government May Award Any Appropriate Contract/instrument Type Under The Authorities Below: federal Acquisition Regulation (far) 10 U.s.c. §4021 (formerly 10 U.s.c. §2371) "other Transaction For Research 10 U.s.c. §4022 (formerly 10 U.s.c. §2371b) "other Transaction For Prototype" 10 U.s.c. §4023 (formerly 10 U.s.c. §2373) "procurement For Experimental Purposes" 10 U.s.c. §4025 (formerly 10 U.s.c. §2374) "prize Competitions" dod Grant And Agreement Regulation (dodgars) the Government Anticipates That A Mix Of Contract/instrument Types Will Be Used Throughout The Life Of This Ara. Generally, Awards Under This Announcement Or Any Calls May Be Cost-plus-fixed Fee (completion And Term), Cost Contract, Firm Fixed Price, Other Transaction Authority, Etc. note: If Proposing A Federal Acquisition Regulation (far) Type Contract, The Far Clauses Will Be Referenced At The Call Level Or Within The Request For Proposal. The Far And Supplement Provisions And Clauses Are Incorporated By Reference. The Full Text Of These Provisions And Clauses Can Be Found At Https://www.acquisition.gov. if Proposing An Assistance Instrument (grants Or Cooperative Agreements) Then Articles And Guidance Found Under Dodgars, Code Of Federal Regulations (cfr) And Omb/dod Policy Shall Be Used And Followed As Appropriate. if Proposing An Other Transaction (ot) These Far References And Clauses Would Not Apply. The Terms And Conditions Of An Ot Agreement Should Be Developed And Negotiated On A Case-by-case Basis. estimated Program Cost: The Overarching Announcement Has An Unrestricted Ceiling. However, Individual Calls May Elect To Provide An Estimated Program Value Or Funding Profile For Planning Purposes. anticipated Number Of Awards: The Air Force Anticipates Awarding Multiple Awards For This Announcement. However, The Air Force Reserves The Right To Award Zero, One, Or More Agreements, Other Transactions, Or Contracts For All, Some Or None Of The Solicited Effort Based On The Offeror’s Ability To Perform Desired Work And Funding Availability. There Is No Limit On The Number Of Awards That May Be Made To An Individual Offeror. schedule: The Anticipated Period Of Performance Will Be Determined Through Dialogue Between Prospective Offerors And Government Representatives For Each Topic Area And Specified In Each Individual Award. deliverables: Hardware And Software Deliverables Will Be Specified Within A Separately Priced Line Items And Data Deliverables Will Be Specified On Individual Cdrl(s) In Any Resultant Contract Or An Ot Article. within Scope Award Modifications: Offerors Are Advised That Due To The Inherent Uncertainty Of Research And Development Efforts, Awards Resulting From This Announcement May Be Modified During Performance To Make Within Scope Changes, To Include But Not Limited To, Modifications Which Increase Overall Contract/award Ceiling Amount. system For Award Management (sam) Registration: Before The Government Can Issue An Award, An Offeror Must Be Registered In The System For Award Management (sam). If An Offeror Was Previously Registered In Central Contractor Registration (ccr), The Information Has Been Transferred To Sam. However, It Is In The Offeror’s Interest To Visit Sam And Ensure That All Of Their Data Is Up To Date From Sam And Other Databases To Avoid Delay In Award. Sam Replaced Ccr, Online Representations And Certifications Application (orca), And The Excluded Parties List System (epls). Sam Allows Firms Interested In Conducting Business With The Federal Government To Provide Basic Information On Business Capabilities And Financial Information. To Register, Visit Https://www.sam.gov. science & Technology (s&t) Program Protection [summary Only -- See Attached Industry Guide For Full Details]: offerors Are Notified That Completion Of A S&t Program Protection Review With An Acceptable Risk Determination Is Required For All Awards Issued Under This Ara. To Reach An Acceptable Risk Level, Offerors May Be Asked To Provide A Mitigation Plan For Any Identified S&t Protection Risks. Offerors Selected For A Potential Award Will Be Required To Submit: 1.) Sf424 "research And Related Senior And Key Person Profile," 2.) Security Program Questionnaire And 3.) Privacy Act Statement. The (3) Template Documents Are Attached To This Announcement. the Government Reserves The Right To Determine An Offeror Unawardable Based On An Unacceptable S&t Protection Risk Determination. During The Security Review Process, If It Is Determined That Covered Individuals Are Identified As Potentially Having A Conflict Of Interest/commitment, The Government Will Not Award The Contract/agreement. announcement Period: The Overarching Announcement Has No End Date And Is Considered To Be In Effect Until Further Closed Or Rescinded. submit All Questions To The Deter Org Mailbox (afrl.deter.ara@us.af.mil) note: Call Points Of Contact Will Be Specified At The Call Level.   topic Areas 1. Directed Energy (de) Sources this Category Of Supplies Covers Research, Development And Testing For All Directed Energy Sources In The Near-term And Far-term In Support Of National Defense. This Area Covers The Design, Component/subsystem, Prototype Risk Reduction, Fabrication/purchase, Assembly, Integration, And Testing Of Directed Energy Source Components (to Include Spares And Alternate Component Technologies), And/or Systems And Any Required Accessories, Materials, And Supplies For Laboratory Research And Experimentation And Field Trials In A Relevant Environment To Demonstrate System Capabilities. Systems May Also Be Hardened To Meet Specific Requirements Imposed For Operations In Any Domain To Include Ground/sea, Airborne, And/or Space. This Area Also Covers The Redesign, Refurbishment, Modification, And/or Upgrade Of Existing Sources, If Required, To Support Laboratory Experimentation, Field Or Flight Trials, And/or Demonstrations. examples Of Directed Energy Sources Include, But Are Not Limited To: a. Laser Sources b. High Power Electromagnetic (hpem) Sources 2. Acquisition Tracking Pointing (atp), Beam Control (bc) And Atmospheric Compensation (ac) Systems this Area Covers The Design, Component/subsystem Prototype Risk Reduction, Fabrication/purchase, Assembly, Integration, And Testing Of Any Hardware, Sensors, Control Electronics, And Software/firmware Required To Develop Atp, Bc And Ac Systems To Control The Propagation Of Directed Energy So As To Maximize Energy/irradiance On Target. This Area Also Includes Any Required Accessories, Materials, Supplies, And/or Services Necessary To Conduct Laboratory Experimentation And Field Trials In A Relevant Environment To Demonstrate System Capabilities. Systems May Also Be Hardened To Meet Specific Requirements Imposed For Operations In Any Domain To Include Ground/sea, Airborne, And/or Space. 3. De Weapon Systems this Area Covers The Design, Component/subsystem Prototype Risk Reduction, Fabrication/purchase, Assembly, Integration, And Testing Of De Weapon Components And Systems, Diagnostics, Accessories, Materials, Supplies, And Services Necessary To Build/integrate Complete Weapon Systems For Laboratory Research, Experimentation And Field Trials In A Relevant Environment To Demonstrate System Capabilities. Systems May Also Be Hardened To Meet Specific Requirements Imposed For Operations In Any Domain To Include Ground/sea, Airborne, And/or Space. Systems Engineering Design/analysis And/or Trade Studies Are Relevant In Regards To Size, Weight, And Power (swap). specific Topics Of Interest Include The Following Areas: a. Feasibility Studies Of Innovative Hpem Applications b. Integration Of Disparate Technologies For The Fielding Of New Hpem Systems And Weapons c. Identification And Quantification Of Useful -hpem Effects d. Development Of Hpem Sources That Have A Role In Future Applications e. System Integration And Demonstration Of Future Hpem Capabilities f. Power Subsystems g. Thermal Management Subsystems h. Command And Control Subsystems i. Platform Integration j. Detection, Targeting And Tracking Subsystems k. Dotmlpf-p Studies And Experimentation l. Conops, Conemps, Ttp Development And Experimentation m. Performance Enhancement Technologies For Existing Systems 4. De Effects Testing provide Testing Of Materials, Components, Subsystems, And Systems To Determine The Vulnerability, Susceptibility, And Accessibility Of Potential De Targets To De Exposure. This Includes The Design, Component/subsystem Prototype Risk Reduction, Fabrication/purchase, Assembly, Integration, And Testing Of Unique De Components, Sources, And Systems And Any Required Diagnostic And/or Special Test Equipment/tooling And Materials Necessary To Conduct De-material Interaction Physics Experimentation To Establish The Efficacy Of De Waveforms To Support The Development Of De Weapons System Requirements And/or Assessment Of Proposed De Weapon Systems. Develop Survivability Requirements And Recommendations For Space Systems And Support Vulnerability Predictions. 5. Modeling, Simulation And Analysis (ms&a) this Area Covers The Development/procurement, Testing, Maintenance, Modification, Upgrade/reuse, And Execution Of Scientific Modeling, Simulation And Analysis Software And Requisite It Hardware Systems Necessary To Efficiently Execute Software To Support De Weapon System Design, Development, Testing, And Data Analysis Of Test Results. This Includes Campaign-level, Engagement-level, System, And Component-level Ms&a Codes To Create Test Scenarios, Assess Design Reference Mission Compliance, Provide Pre-test Predictions, And Conduct Post-test Assessment Of System Performance. In Addition, Sound Principles For Software Engineering And Development Must Be Employed For All Developed Software And Documentation. Robust Software Testing, Validation, And Verification Are Critical To Software Development Efforts. As Appropriate, Software Must Scale To Large Simulation Sizes And Be Portable To Massively Parallel Computer Architecture. Ms&a Software May Include Fast Running Engineering Codes And Detailed Physics Modeling Codes. examples Of Ms&a Sub-topic Areas Include, But Are Not Limited To: a. De System Performance Ms&a b. De System Effects Ms&a c. De System Target Assessment d. De System Biosafety And Biological Effects e. De Source And Component Virtual Design f. Satellite Signatures And Radiometric/photometric Assessments Of Space Objects. g. Assess Electro-optical Space Domain Awareness (sda) Systems And Architectures. h. Space System Functional Modeling And Response i. Conduct Space Domain Awareness In Non-traditional Orbits j. Quantify Safe Operating Conditions For Lasers Operating Through The Atmosphere And Space 6. Wargaming this Area Covers The Development/procurement, Testing, Maintenance, Modification, Upgrade/reuse, And Execution Of Wargaming And Scientific Modeling, Simulation And Analysis Software And Their Requisite It Hardware Systems Necessary To Efficiently Execute This Software To Support De Weapon System Design, Development, Testing, And Data Analysis Of Wargaming Results. This Includes Campaign-level, Engagement-level, System, And Component-level Wargaming Ms&a Codes To Create Test Scenarios, Assess Design Reference Mission Compliance, Provide Pre-test Predictions, And Conduct Post-test Assessment Of System Performance. In Addition, Sound Principles For Software Engineering And Development Must Be Employed For All Developed Software And Documentation. Robust Software Testing, Validation, And Verification Are Critical To Software Development Efforts. As Appropriate, Software Must Scale To Large Wargaming And Simulation Sizes And Be Portable To Massively Parallel Computer Architecture. Wargaming Ms&a Software May Include Fast Running Engineering Codes And Detailed Physics Modeling Codes. Additionally, The Wargaming Area Should Provide General Wargaming Support To Include De Wargame Planning, Table Top, Ms&a, And Field Execution, And Wargame Reporting. In Addition, Provide Required Hardware, Software/firmware, Accessories, Materials, Supplies, Infrastructure, Diagnostics, Targets, Safety Equipment, And Services Necessary To Conduct Wargame Research, Experiments, Field And/or Range Testing Of De Components, Subsystems, Systems And Demonstrations Under Operationally Relevant Conditions. 7. Innovative Space Domain Awareness provide Basic & Applied Research, Algorithms, Software/firmware, Materials, Supplies, And Services Necessary To Conduct Technology Maturation For Ground-based Surveillance Of Space Objects. Examples Include, But Are Not Limited To: a. Closely-spaced Object Detection And Characterization. b. Daytime Detection And Custody Of Satellites. c. Orbit Determination Techniques And Algorithms For Satellites Significantly Affected By Lunar And Solar Gravity. d. Rapid, On-demand Orbit Determination. e. Extremely Wide Field-of-view Image Exploitation For Satellite Discovery And Custody. f. Multi-phenomenology Sensor Integration (e.g. Optical, Radar, Passive Radiofrequency). g. Active Optical Techniques For Satellite Ranging And Characterization (e.g. Lidar, Ladar). h. Sharp Imaging Of Satellites Through The Atmosphere At Low Elevation Angles. i. Characterization Of Atmospheric Deep Turbulence For Image Restoration. j. Techniques, Algorithms, Architecture Designs, Etc. For Collaborative Autonomous Telescope Networks. k. Multispectral, Hyperspectral, And Polarimetric Characterization Of Space Objects. l. Techniques To Improve And Exploit Short- And Long-wave Infrared Characterization Of Space Objects. m. Machine Learning Algorithms To Advance The State-of-the-art In Areas Such As: • Point Spread Function Correction. • Space Object Image Classification Using Resolved Or Non-resolved Sensor Imagery. • Uncorrelated Track Association. • Space Object Feature Identification, Model Inference, And Attitude Regression. • Space Object Detection In Noisy Image Backgrounds. • Generation Of Realistic Space Scene Imagery / Discernment Of Real Vs. Synthetic. • Detection Of Subtle, Unique Image Artefacts Of Interest In A Large Dataset. 8. Experiments, Testing And Demonstrations provide General And Specialized Test Support To Include De Test Planning, Laboratory And Field Demonstration, And Reporting. Provide Required Hardware, Software/firmware, Accessories, Materials, Supplies, Infrastructure, Diagnostics, Targets, Safety Equipment, And Services Necessary To Conduct Testing Of De Components, Subsystems, Systems, And Demonstrations Under Operationally Relevant Conditions. 9. Laboratory Materials, Supplies And Services In Support Of Experimentation provide Required Ancillary Support Systems, Equipment, Materials, Supplies, Infrastructure, And Services Necessary To Support The Development, Operation, Maintenance, And Testing Required To Evaluate De Through Experimentation In The Laboratory And Field During Trials Or Flight/range Testing. Examples Include, But Are Not Limited To: a. Clean Rooms, Anechoic Chambers And Necessary Equipment, Materials, Supplies And/or Services To Support All Aspects Of De Source Development, Laboratory Experimentation, And Field Trials. b. Diagnostic And/or Special Test Equipment/tooling Required For: • Quality Assurance Of Components Used In The Fabrication Of De Sources • Damage Assessments And Root Cause Analysis Of Component, Subsystem And System Failures • Characterization Of Target Physical, Chemical, And Electromagnetic Properties • Fabrication, Assembly, Integration, Testing, Operation And Maintenance Of De Sources • Direct/indirect Measurements Of De Source Performance c. Power Systems Required To Operate The Source And Any Required Ancillary Equipment Or Services Necessary To Install, Operate And/or Maintain These Systems d. Unique Chemicals To Operate, Clean, And/or Maintain Direct Energy Systems And/or Laboratory Facilities Used For Directed Energy Experimentation As Well As Any Required Materials, Accessories Or Services Required For Safe Storage, Use, Operations, And Proper Disposal Of Any Hazardous Materials e. Thermal Management Components And Systems, To Include System-level And Facility-level Systems, Necessary To Support Safe Operations Of De Sources. This Includes Materials, Supplies, Accessories, Services And/or Any Support Required For Safe Operations And Maintenance Of The System As Well As Proper Disposal Of Hazardous Materials/waste. f. Any Required Safety Related Items Necessary To Fabricate, Assemble, Integrate, Test, Operate And Maintain Directed Energy Sources. g. Transportation: This Area Covers All Transportation, To And From, Various Research Facilities And Sites To Conduct Field And/or Flight Experimentation, Testing And/or Trials Of Directed Energy Components, Sub-systems And Systems And Demonstrations. This Includes Such Items As Associated Support/handling Equipment, Special Test Equipment/tooling, Spares, And Diagnostic/testing Equipment. Specialized Transportation Requirements May Include: Design, Fabrication And/or Purchase Of Specialized Packaging, Crating, Enclosures, Trailers, And/or Vehicles From Which The Transported Item(s) Will Be Operated/maintained To Conduct Experimentation, Testing And/or Trials Outside Of Traditional Laboratory Spaces. Additionally, This Area Covers Aspects Of Safe Transportation To And From Remote Field Locations, Department Of Defense Test Ranges, And Installations In Support Of Field And/or Flight Experimentation, Testing And/or Trials. ***updates As Of 09 Dec 2021*** a) Deter Industry User Guide, Amendment 02 Updateto Section 2.b., White Papers Shall Be Submitted Using The Following Link Https://usg.valideval.com/teams/deter/signuppapers Update To Section 2.c.2. b) Deter White Paper Cover Sheet, Attachment 1, Amendment 1 ***updates As Of 06 Jan 2022*** Corrects The Valid Eval Web Address In The Open Announcement Description Above From: Https://usg.valideval.com/teams/deter/signuppapers To: Https://usg.valideval.com/teams/deter/signup ***updates As Of 11 Aug 2022*** a.) Update Statute Renumbering Throughout Deter Ara And Industry Guide 10 U.s.c. §4021 (formerly 10 U.s.c. §2371) "other Transaction For Research 10 U.s.c. §4022 (formerly 10 U.s.c. §2371b) "other Transaction For Prototype" 10 U.s.c. §4023 (formerly 10 U.s.c. §2373) "procurement For Experimental Purposes" 10 U.s.c. §4025 (formerly 10 U.s.c. §2374) "prize Competitions" b.) Update Deter Contracting Points Of Contact primary: Mr. Bill Sherrod, Afrl/rdk c.) Include Requirement For Science & Technology (s&t) Program Protection all Proposal Responses (not Required For White Paper Submission) Are Required To Submit The Following With All Responses: 1.) A Sf424 (research And Related Senior/key Person Profile)(see Attachments), And 2.) Completed Program Security Questionnaire (see Attachments) 3.) Privacy Act Statement (see Attachments) d.) Request For 500 Word Abstract On White Paper Submissions offerors Shall Include A Short 500 Word Abstract As A Part Of The White Paper Narrative That Broadly Describes The Fundamental Intent Of The Proposed Effort Along With The Intended Approach. e.) Duplicate White Paper Submissions offerors Advised That Duplicate White Paper Submissions Within The Same 12 Month Timeframe Will Not Be Separately Evaluated. Please Do Not Submit Duplicate White Paper Submissions Within The Same 12 Month Period. ***updates As Of 08 Oct 2024*** a.) Summary Of Awards: below Is A Summary Of All Awards Made From Inception (8 Feb 2021) To Date (08 Oct 2024), Under The Deter Ara: 1.) Calls: 15 Calls Have Been Issued Or Are In Progress 13 Awards Have Been Issued Or Are In Progress, With A Combined Value Of $188m 2.) White Paper Open Announcement: 193 White Papers Have Been Received 32 Awards Have Been Issued Or Are In Progress, With A Combined Value Of $165m b.) Updated Evaluation Rubric: slight Changes Have Been Made To The Evaluation Rubric, Which Can Be Found Under The Attached "valid Eval Rubric (version 2.0)". The Updated Evaluation Rubric Will Be Used For All White Paper And Proposal Evaluations Effective Immediately. c.) Afrl Directed Energy -- Virtual Industry Day: date: Wednesday, 6 Nov 2024 location: Virtual Only (tentative Platform: Microsoft Teams Conference) schedule: 0900-1000 Rdl Laser Division Q&a Session 1000-1100 Rds Space Electro-optics Q&a Session 1300-1400 Rdh High Power Electro-magnetics Q&a Session 1400-1500 Rdm Modeling, Simulation & Wargaming Q&a Session discussion Level: Controlled Unclassified Information (cui). Participants Are Required To Have A Current And Active Dd Form 2345 To Access Or Participate In Any Virtual Q&a Session registered Participants May Attend One, Some Or All Of The Q&a Sessions registration Link: Https://forms.osi.apps.mil/r/h8zzpzdnht registration Closes Wednesday, 30 Oct 24 At 1700 Mt. After The Registration Form Is Submitted, Afrl Will Verify The Status Of The Dd Form 2345 And Will Send A Confirmation Email That The Registration Is Complete. A Subsequent Email Will Be Sent No Later Than 4 Nov 2024 With The Links To The Q&a Session. ***updates As Of 22 Nov 2024*** incorporated Updated Science & Technology (s&t) Program Protection Guidance Above (summary Only) And Under The Attached Industry Guide (full Details). incorporate "privacy Act Statement" As Additional Attachment.

Details: (please See Latest Baa Announcement Within, Posted02april 2020) this Is A Modification To The Broad Agency Announcement (baa) N00024-19-r-4145 To Extend The Date For Receipt Of White Papers And Full Proposals To 6 February 2028 And Correct Some Administrative Information. Any White Papers That Have Already Been Submitted Do Not Need To Be Resubmitted. Included In This Modification To The Baa Is Revision To The Power Controls Section To Augment The Desired Technology Interests. Included In This Modification To The Baa Is The Identification Of An Electronic Mail Submission Address For White Papers. Included In This Modification To The Baa Is Also A Change To The Identified Procuring Contracting Officer And Contract Specialist. The Navsea 0241 Points Of Contact (poc) Are Changed As Follows: The Primary Point Of Contact Remains Ms. Sakeena Siddiqi, Procuring Contracting Officer, Sakeena.s.siddiqi.civ@us.navy.mil And Secondary Point Of Contact Shall Be Mr. Tyler Pacak, Tyler.pacak@navy.mil. all Other Information Contained In The Prior Announcements Through Apr 02, 2020 Remain Unchanged. (please See Latest Baa Announcement Within, Posted 04 June 2019) i. Administrative Information this Publication Constitutes A Broad Agency Announcement (baa), As Contemplated In Federal Acquisition Regulation (far) 6.102(d)(2). A Formal Request For Proposals (rfp), Solicitation, And/or Additional Information Regarding This Announcement Will Not Be Issued Or Further Announced. This Announcement Will Remain Open For Approximately One Year From The Date Of Publication Or Until Extended Or Replaced By A Successor Baa. Initial Responses To This Announcement Must Be In The Form Of White Papers. Proposals Shall Be Requested Only From Those Offerors Selected As A Result Of The Scientific Review Of The White Papers Made In Accordance With The Evaluation Criteria Specified Herein. White Papers May Be Submitted Any Time During This Period. Awards May Take The Form Of Contracts, Cooperative Agreements, Or Other Transactions Agreements. the Naval Sea Systems Command (navsea) Will Not Issue Paper Copies Of This Announcement. Navsea Reserves The Right To Select For Proposal Submission All, Some, Or None From Among The White Papers Submitted In Response To This Announcement. For Those Who Are Requested To Submit Proposals, Navsea Reserves The Right To Award All, Some, Or None Of The Proposals Received Under This Baa. Navsea Provides No Funding For Direct Reimbursement Of White Paper Or Proposal Development Costs. Technical And Cost Proposals (or Any Other Material) Submitted In Response To This Baa Will Not Be Returned. It Is The Policy Of Navsea To Treat All White Papers And Proposals As Competition Sensitive Information And To Disclose Their Contents Only For The Purposes Of Evaluation. white Papers Submitted Under N00024-10-r-4215 That Have Not Resulted In A Request For A Proposal Are Hereby Considered Closed-out And No Further Action Will Be Taken On Them. Unsuccessful Offerors Under N00024-10-r- 4215 Are Encouraged To Review This Baa For Relevance And Resubmit If The Technology Proposed Meets The Criteria Below. Contract Awards Made Under N00024-10-r-4215 And Under This Baa Will Be Announced Following The Announcement Criteria Set Forth In The Far. ii. General Information 1. Agency Name naval Sea Systems Command (navsea) 1333 Isaac Hull Ave Se washington, Dc 20376 2. Research Opportunity Title research And Development Of Naval Power And Energy Systems 3. Response Date this Announcement Will Remain Open Through The Response Date Indicated Or Until Extended Or Replaced By A Successor Baa. White Papers May Be Submitted Any Time During This Period. 4. Research Opportunity Description 4.1 Summary navsea, On Behalf Of The Electric Ships Office (pms 460, Organizationally A Part Of The Program Executive Office Ships) Is Interested In White Papers For Long And Short Term Research And Development (r&d) Projects That Offer Potential For Advancement And Improvements In Current And Future Shipboard Electric Power And Energy Systems At The Major Component, Subsystem And System Level. The Mission Of Pms 460 Is To Develop And Provide Smaller, Simpler, More Affordable, And More Capable Ship Power Systems To The Navy By Defining Open Architectures, Developing Common Components, And Focusing Navy, Industry, And Academia Investments. Pms 460 Will Provide Leadership Of The Developments Identified As Part Of This Baa, Will Direct The Transition Of Associated Technologies Developed By The Office Of Naval Research (onr), And Will Manage The Technology Portfolio Represented By Program Element (pe) 0603573n (advanced Surface Machinery Systems) For Transition Into Existing And Future Navy Ships. 4.2 Naval Power And Energy Systems Technology Development Roadmap naval Power And Energy Systems Are Described In Detail In The 2019 Naval Power And Energy Systems Technology Development Roadmap (npes Tdr). The Npes Tdr Focuses And Aligns The Power System Investments For The Navy, Defense Department, Industry And Academia To Guide Future Research And Development Investments To Enable The Navy To Leverage These Investments To Meet Its Future Needs More Affordably. Included In The Npes Tdr Are Specific Recommendations And Opportunities For Near, Mid And Long Term Investments, With A Renewed Focus On Energy Management. These Opportunities Range From An Energy Magazine To Support Advanced Weapons And Sensors To The Development Of An Integrated Power And Energy System (ipes). The Npes Tdr Aligns Electric Power System Developments With War Fighter Needs And Enables Capability-based Budgeting. The Npes Tdr Is Responding To The Emerging Needs Of The Navy, And While The Plan Is Specific In Its Recommendations, It Is Inherently Flexible Enough To Adapt To The Changing Requirements And Threats That May Influence The 30-year Ship Acquisition Plan. The First Section Of The Roadmap Establishes Why Npes Are A Critical Part Of The Kill Chain Based On The Capabilities Desired By The Navy In The Near Term, As Well As Supporting Future Platforms In The Navys 30-year Shipbuilding Plan. The Second Section Of The Roadmap Presents Power And Energy Requirements That Are Derived From Mission Systems Necessary To Support Future Warfighting Needs. The Third Section Describes Required Initiatives Based On Capabilities And The Projected Electrical Requirements Of The Future Ships. 4.3 Focus Areas the Areas Of Focus For This Baa Include, But Are Not Limited To, The "fydp/near-term" Activities As Described Throughout The Npes Tdr; The Analysis, Development, Risk Reduction And Demonstration Of Future Shipboard (both Manned And Unmanned) Electric Power Systems And Components, Emphasizing Shipboard Power Generation, Electric Propulsion, Power Conversion, Energy Storage, Distribution And Control; Power Quality, Continuity, And System Stability; Electric Power System And Component Level Modeling And Simulation; Energy Storage Technologies; Electrical System Survivability; And Power System Simplicity, Upgradeability, Flexibility, And Ruggedness. The Integrated Power And Energy System (ipes) Architecture Provides The Framework For Partitioning The Equipment And Software Into Modules And Defines Functional Elements And The Power/control And Information Relationships Between Them. For Power Generation, High Power Distribution, Propulsion, And Large Loads, The Architecture Includes Medium Voltage Ac Power (with Emphasis On Affordability), And Medium Voltage Dc Power (with Emphasis On Power Density And Fault Management). For Ship Service Electrical Loads, The Architecture Includes Zonal Electrical Distribution Which May Be Either Ac Or Dc, Depending Upon The Specific Application. Also Of Particular Interest Are Technologies That Result In Significant Energy Efficiency, Power Density Improvements And/or Carbon Footprint Improvements Over Existing Propulsion And Power System Technologies. The Npes Tdr Partitions The Power System In To Functional Areas That Include The Following. 4.3.1 Energy Storage energy Storage Modules May Support Short Duration To Long Duration Energy Storage Applications, Which Utilize A Combination Of Technologies To Minimize Power Quality And Continuity Impacts Across The System. For The Short Duration Energy Storage Applications, The Module Should Provide Hold-up Power To Uninterruptible Loads For Fault Clearing And Transient Isolation, As Well As Load Leveling For Pulse Power Loads. For The Mid Duration, The Module Should Provide Up To Approximately 3mw (100 - 150 Kw-hr) Of Standby Power For Pulse Power Loads While Also Providing Continuity Of Operations For A Subset Of Equipment Between Uninterruptible And Full Ships Load (including Emergency Power Generation Starting In A Dark Ship Condition). For Long Duration Applications, Energy Storage Modules Should Provide The Required Power As An Emergency Backup System Or To Provide Increased Stealth For Specialty Equipment. The Required Duration For This Type Of Application May Extend Up To Days Or Longer, And May Be Intermittent Or Continuous. A Number Of Energy Storage Technologies For Future Ship Applications Are Of Interest To The Navy, Including Various Electrochemical, Capacitor-based, Or Rotating Discussed Below: a. Capacitor: Electrochemical Capacitor Improvements Continue To Focus On Improving Energy Density While Maintaining Inherently High-power Density. Design Improvements Include Development And Integration Of Higher Temperature Films, Advanced Electrolytes, Advanced Electrode Materials, And Minimizing Equivalent Series Resistance (esr). b. Rotating: The Navy Has Interest In The Investment From The Transportation Industry In Flywheel Systems That Can Handle Gyroscopic Forces Continues To Support Flywheel Usage In Commercial Rail And Ground Transportation. Additional Factors Of Interest To The Navy Include Safety, Recharge/discharge Rates, Ship Motion Impacts, Environmental Impacts And Control. c. Electrochemical: Factors Of Interest To The Navy With Respect To Electrochemical Energy Storage Include The Ability To Maintain State Of Charge When Not In Use; Change In Voltage Versus State Of Charge; Charge And Discharge Capability; The Temporary Or Permanent Loss Of Capacity Due To Repeated Shallow Discharges; The Ability To Shallow Charge And Discharge Or Partially Charge Intermittently During A Discharge; Battery Life Considerations Such As Service-life, Cycle Life, And Shelf-life; Off-gas Properties That Affect The Level Of Ventilation And Associated Auxiliary Systems; And Safety Enhancements To Support Qualification For Use Onboard Us Navy Ships. near Term Navy Interests Are In The Area Of Common And Scalable Hardware And Software Elements Which Enable Advanced Weapons And Sensors And In Understanding The Sizing Algorithms For How To Optimize Energy Storage Sizing Against Various Competing System Requirements (short Duration/high Power Vs. Long Duration/low Power, For Example. The Specific Design Issues To Be Considered Include Reliability, Volumetric And Gravimetric Power And Energy Densities, Differentiating Between High Levels Of Stored Energy And High Energy Density. The Relevant Information Required For Characterizing Technology Performance Include: Technology Readiness Level (trl) Of Components And Systems; Production Capability; Safety Evaluation And Qualifications Performed On Relevant Subsystems Or Components (any Hazard Analyses Of Systems Designs As Relevant To Notional Applications); Other Military Application Of The Devices; Energy Storage Management System Approach; Thermal Characteristics, Constraints, And Cooling Requirements; Auxiliary Requirements (load); Device Impedance (heat Generation Characteristics); And Device Efficiency (discharge/recharge). 4.3.2 Power Conversion industry Continues To Drive Towards Increased Power Density, Increased Efficiency, Higher Switching Frequencies, And Refined Topologies With Associated Control Schemes. Innovation In Power Conversion From The Development And Implementation Of Wide-bandgap Devices, Such As Silicon Carbide (sic), Promise Reduction In Losses Many Times Over Silicon. The Use Of High Frequency Transformers Can Provide Galvanic Isolation With Reduced Size And Weight Compared To Traditional Transformers. Advances In Cooling Methods Will Be Required To Handle Larger Heat Loads Associated With Higher Power Operation. a Typical Navy Power Conversion Module Might Consist Of A Solid State Power Converter And/or A Transformer. Advanced Topologies And Technologies, Such As The Application Of Wide Band Gap Devices, Are Of Particular Interest. Navy Interests Are In The Area Of Innovative Approaches To Address Converting High Voltage Ac/dc To 1000 Vdc With Power Levels On The Order Of 3mw Or Larger. The Specific Design Issues To Be Considered Include Modularity, Open Architecture (focusing On Future Power System Flexibility And The Ability Of A Conversion Module Within A Ships Power System To Be Replaced/ Upgraded In Support Of Lifecycle Mission System Upgrades), Reliability, Cost, And Conversion Efficiency. Areas Of Interest Include More Power-dense Converters Supporting Advanced Mission Systems And Prototyping Of Full Scale Conversion Based On Second Generation Wide-bandgap Devices. 4.3.3 Power Distribution power Distribution Typically Consists Of Bus Duct/ Bus Pipe, Cables, Connections, Switchgear And Fault Protection Equipment, Load Centers, And Other Hardware Necessary To Deliver Power From Generators To Loads. Industry Has Used Medium Voltage Dc (mvdc) Transmission As A Method To Reduce Losses Across Long Distances. Complementarily, Industry Is Developing Mvdc Circuit Protection For Use In Mvdc Transmission Variants Of Approximately 50, 100, And 150 Megawatts (mw) At Transmission Voltages Of 20 To 50 Kvdc. Analysis Includes Modeling And Simulation To Determine Methods For Assessing The Benefits Of Dc Vs Ac Undersea Transmission And Distribution Systems For Offshore Oil And Gas. Industry And Academia Continue To Invest Resources In Advanced Conductors That Have Applications In Power Distribution, Power Generation, And Propulsion. Research Is Focused On Using Carbon Nanotubes. The Development Of A Room Temperature, Lightweight, Low Resistance Conductor Is Of Great Interest To The Navy. areas Of Interest Include Development Of An Mvdc Distribution System Up To 12 Kvdc To Meet Maximum Load Demands; Design Of An Appropriate In-zone Distribution System Architecture; Development Of High Speed 1 Kvdc And 12 Kvdc Solid State Circuit Protection Devices That Are Ship Ready, And Advanced Conductors Capable Of Supporting Power Distribution. 4.3.4 Prime Movers (including Power Generation) power Generation Converts Fuel Into Electrical Power. A Typical Power Generation Module Might Consist Of A Gas Turbine Or Diesel Engine (prime Mover), A Generator (see Rotating Machine Discussion Below), A Rectifier (either Active Or Passive), Auxiliary Support Sub-modules And Module Controls. Other Possible Power Generation Technologies Include Propulsion Derived Ship Service (pdss), Fuel Cells, Or Other Direct Energy Conversion Concepts. Power Generation Concepts Include 60 Hz Wound Rotor Synchronous Generator Driven Directly By A Marine Gas Turbine (up To 30 Mva Rating); Commercially Derived Or Militarized Design Variants Of The Above; And Higher Speed, Higher Frequency, High Power Density Variants Of The Above With High Speed Or Geared Turbine Drive. Npes Dc Technologies Permit Prime Movers And Other Electrical Sources (such As Energy Storage) To Operate At Different, Non-60hz Electrical Frequency Speeds, Improving Survivability, Resiliency, And Operational Availability. Energy Storage That Is Fully Integrated With The Power Generation Can Enable Uninterrupted Power To High Priority Loads, Mission Systems That Reduce Susceptibility, And Damage Control Systems To Enable Enhanced Recoverability. the Specific Design Issues To Be Considered Include Fuel Efficiency, Module Level Power Density, Machine Insulation System Characteristics, Size, Weight, Cost, Maintainability, Availability, Harmonic Loading, Voltage, Power, System Grounding Approaches, Fault Protection, Response To Large Dynamic (step) Or Pulse Type Loading Originated From Ship Propulsion Or Directed Energy/electromagnetic Weapons, Interface To Main Or Ship Service Bus, Autonomy, Limited Maintenance, And Commercial Availability. Navy Interests Are In The Area Of Innovative Approaches To Power Generation In The 5 To 30 Mw Range, Utilizing Gas Turbines, Diesel Engines And Other Emerging Power Technologies That Address Challenges Associated With Achieving Reduced Fuel Consumption, Decreased Life Cycle And Acquisition Cost, Support Of Ship Integration, Enable Flexibility, Enable Power Upgrades, And Improved Environmental Compliance. Near Term Navy Interest Includes 10-30 Mw (nominally 25 Mw) Output Power Rating And The Power Generation Source Able To Supply Two Independent Electrical Buses (where Abnormal Conditions, Including Pulsed/stochastic Loads, On One Bus Do Not Impact The Other Bus) At 12 Kvdc (while Also Considering 6kvdc, 18kvdc, And 1 Kvdc). Enhanced Fuel Injection, Higher Operating Temperatures And Pressures, And Optimized Thermal Management Are Critical For Future Prime Movers. Advanced Controls For Increased Efficiency, Reduced Maintenance, And Increased Reliability Include Implementation Of Digital Controls; Autonomous And Unmanned Power Control; Enhanced Engine Monitoring, Diagnostics, And Prognostics; And Distributed Controls. Advanced Designs For Increased Efficiency Include New Applications Of Thermodynamic Cycles Such As Humphrey/atkinson Cycle For Gas Turbines And Diesels And Miller Cycle For Diesel. the Navy Is Interested In Developing A Knowledge Bank Of Information On Potential Generator Sets, Generator Electrical Interface Requirements, And The Impacts Of Those Requirements On Generator Set Performance And Size, As A Logical Next Step From The Request For Information Released Under Announcement N00024-16-r-4205. A Long-term Goal For This Effort Is To Maximize Military Effectiveness Through Design Choice And Configuration Option Flexibility When Developing Next-generation Distribution Plants. The Power Generation Source Should Fit Within The Length Of A Typical Engine Room (46 Feet, Including Allowances For Any Needed Maintenance And Component Removal). The Power Generation Source Is Expected To Have The Ability To: Control Steady-state Voltage-current Characteristic For Its Interface; To Maintain Stability; And To Adjust Control Set-points From System Level Controllers. For Any Proposed Design Approach, Initial Efforts Would Include Conceptual Design Trade Studies That Inform The Performance Level That Can Be Achieved. Trade Studies May Address Pulsed Load Capability (generator/rectifier Design To Increase Pulse Load Capability, Engine Speed Variation Limits, And Impact Of Cyclic Pulse Load On Component Life); Power Density (cost Vs. Benefits Of High Speed Or High Frequency, Mounting On Common Skid, And Advanced Cooling Concepts); Single Vs. Dual Outputs (continuous Vs. Pulse Rating For Each Output, Voltage Regulation With Shared Field, And Control Of Load Sharing); Efficiency (part Load Vs. Full Load Optimization, Flexible Speed Regulation, Impact Of Intake And Exhaust Duct Size/pressure Drop On Engine Efficiency); Power Quality (voltage Transient, Voltage Modulation For Step, Pulse Loads, Impact Of Voltage And Current Ripple Requirements, And Common Mode Current); Pgm Controls (prime Mover Speed Vs. Generator Field Vs. Rectifier Active Phase Angle Control, And Pulse Anticipation); Stability When Operating In Parallel With Other Sources; Short Circuit Requirements; And Dark Ship Start Capability (self-contained Support Auxiliaries). Trade Studies May Also Address How Rotational Energy Storage Can Be Built Into The Design Of The Generator Or Added To The Generator And What Parameters Need To Be Defined In Order To Exploit This Capability. Development Of Advanced Coatings And Materials That Support High Temperature Operations Of A Gas Turbine Is Also Of Interest. Energy Harvesting To Convert Heat Energy And Specifically Low Quality Heat Energy To Electricity Using Solid State Components Is Also Of Interest To The Navy. 4.3.5 Rotating Machines (including Generators And Propulsion Motors) recent Trends In Electrical Machines Include Neural Networks; Artificial Intelligence; Expert System; Fiber Communications And Integrated Electronics; New Ceramic Conducting And Dielectric Materials; And Magnetic Levitation. High Temperature Superconducting Rotors Have Higher Power Density Than Their Induction And Synchronous Rotor Counterparts. Wind Power Generators Eliminate Excitation Losses Which Can Account For 30% Of Total Generator Losses. The Offshore Wind Power Industry Is Moving To Larger Power Wind Tower Generators In The 10mw Class. Advanced Low Resistance Room Temperature Wire And Hts Shows Promise For These Higher Power Levels Because Of Low Excitation Losses And Low Weight Due To Reduction In Stator And Rotor Iron. Hts Motors May Be Up To 50% Smaller And Lighter Than Traditional Iron-core And Copper Machines. They Have Reduced Harmonic Vibrations Due To Minimization Of Flux Path Iron And Have Mitigated Thermal Cycling Failures Due To Precision Control Of Temperature. propulsion Motor Concepts Of Interest To The Navy Include Permanent Magnet Motors (radial Air Gap, Axial Air Gap, Or Transverse Flux), Induction Motors (wound Rotor Or Squirrel Cage), Superconducting Field Type (homopolar Dc Or Synchronous Ac). The Drivers And Issues Associated With These Designs Include Acoustic Signature, Noise (requirements, Limitations, Modeling, Sources, And Mitigation Methods), Shock, Vibration, Thermal Management, Manufacturing Infrastructure, Machine Insulation System Characteristics, Commercial Commonality, Platform Commonality, Cost, Torque, Power, Weight, Diameter, Length, Voltage, Motor Configuration, And Ship Arrangements Constraints. Motor Drives That May Be Explored Include Cyclo-converter (with Variations In Control And Power Device Types), Pulse Width Modulated Converter/inverter (with Many Variations In Topology), Switching (hard Switched, Soft Switched), And Matrix Converter (with Variations In Control, Topology, Cooling, Power Device Type). Technologies For Drives And Rotating Machines Which Allow The Ability To Operate As A Motor And A Generator To Facilitate A Pdss Installation Or On A Fully Integrated Power System To Leverage The Inherent Energy Storage In The Ship's Motion May Be Explored. Integrated Motor/propulsor Concepts May Be Considered Either As Aft-mounted Main Propulsion Or As A Forward Propulsor Capable Of Propelling A Ship At A Tactically Useful Speed. Areas Of Interest For Future Rotating Machines Include Increased Magnetic Material Flux Carrying Or Flux Generation Capacity; Improved Electrical Insulation Material And Insulation System Dielectric Strength; Increased Mechanical Strength, Increased Thermal Conductivity, And Reduced Sensitivity To Temperature; Improved Structural Materials And Design Concepts That Accept Higher Torsional And Electromagnetically Induced Stress; Innovative And Aggressive Cooling To Allow Improved Thermal Management And Increased Current Loading; Increased Electrical Conductor Current Carrying Capacity And Loss Reduction. 4.3.6 Cooling And Thermal Management as The Demand And Complexity Of High Energy Loads Increases, So Does The Demand And Complexity Of Thermal Management Solutions. Assessing And Optimizing The Effectiveness Of A Thermal Management System Requires The Analysis Of Thermal Energy Acquisition, Thermal Energy Transport, And Thermal Energy Rejection, Storage, And Conversion. The Design Of The Thermal Management System Aims To Transfer The Thermal Energy Loads At The Sources To The Sinks In The Most Efficient Manner. areas Of Interest To The Navy With Respect To Cooling And Thermal Management Include The Application Of Two Phased Cooling And Other Advanced Cooling Techniques To Power Electronics And Other Npes Components And Innovative Approaches To Manage Overall Ship Thermal Management Issues Including Advanced Thermal Architectures, Thermal Energy Storage Systems, Increases In Efficiency, And Advanced Control Philosophies. 4.3.7 Power Controls controls Manage Power And Energy Flow Within The Ship To Ensure Delivery To The Right Load In The Right Form At The Right Time. Supervisory Power System Control Typically Resides On An External Distributed Computer System And Therefore Does Not Include Hardware Elements Unless Specialized Hardware Is Required. The Challenge To Implement Tactical Energy Management (tem) Is To Integrate Energy Storage, Power Generation, And Interfaces With Advanced Warfighting Systems And Controls. Tem Is Critical To Enabling Full Utilization Of The Capabilities Possible From Technologies Under Development. The State Complexity And Combat Engagement Timelines For Notional Future Warfighting Scenarios Are Expected To Exceed The Cognitive Capacity And Response Times Of Human Operators To Effectively Manage The Electric Plant Via Existing Control System Schema In Support Of Executing Ship Missions. The Survivability Requirements For Military Ships Combined With The Higher Dynamic Power Characterisitics (pulse Load) Characteristics Of Some Mission Systems Will Require More Sophisticated Control Interfaces, Power Management Approaches, And Algorithms Than Are Commercially Available. The Navy Is Pursuing A Long Term Strategy To Create A Unified, Cyber Secure Architecture For Machinery Control Systems That Feature A Common, Reusable, Cyber Hardened Machinery Control Domain Specific Infrastructure Elements; A Mechanism For Transitioning New Technology From A Variety Of Sources In An Efficient And Consistent Manner; And A Mechanism To Provide Life Cycle Updates And Support In A Cost Effective And Timely Manner.tem Controls Will Be Expected To Maintain Awareness Of The Electric Plant Operating State (real Time Modeling); Interface With Ship Mission Planning (external To The Electric Plant Control Systems) For Energy Resource Prioritization, Planning, And Coordination Towards The Identification Of Resource Allocation States That Dynamically Optimize Mission Effectiveness; Identify And Select Optimal Trajectories To Achieving Those Optimal Resource Allocation States; And Actuate The Relevant Electric Plant Components To Move The Electric Plant State Along Those Optimized Trajectories Towards The Optimal Resource Allocation State. Tem Controls Would Enable Reduced Power And Energy System Resource Requirements For A Given Capability (or Improved Capability For A Given Set Of Resources); Increased Adaptability Of The Navy’s Power And Energy System Design To Keep Pace With An Evolving Threat Environment; And Maximized Abilities To Execute The Ship’s Mission. the Navy Is Interested In Potential Applications Of Distributed Control Architectures That Have Led To The Development Of Intelligent Agents That Have Some Autonomous Ability To Reason About System State And Enact Appropriate Control Policies. A Simple Example Of These Agents In A Control System Is The Use Of Autonomous Software Coupled With Smart Meters In A Smart Grid Implementation. The Agents, Smart Meters In This Example, Can Temporarily Shut Off Air Conditioning But Not The Refrigerator In Residences During Grid Peak Power Usage Times When The Cost Per Watt Is Highest On Hot Days. The Agent Software Acts Autonomously Within Its Authority To Comply With Programmed Customer Desires. The Navy Is Interested In Tem Controls Within A Modular Open Systems Architecture Framework Such That They Are Agnostic Of, But Affordably Customizable To, Specific Ship Platforms And Power System Architectures. Tem Controls May Reside Between (i.e. Interface With) Embedded Layers Within Individual Power System Components, Ships’ Supervisory Machinery Control Systems, And Ships’ Mission Planning Systems. Initial Or Further Development Or Modification Of These Interfaces May Be Required To Achieve Desired Performance Behaviors And Characteristics. Tem Controls Are Expected To Develop Within A Model-based System Engineering And Digital Engineering Environment And Will Be Initially Evaluated In A Purely Computational Environment, Representing Navy-developed Shipboard-representative Power And Energy System Architecture(s), But Will Be Progressively Evaluated On Systems With Increasing Levels Of Physical Instantiation (i.e., Controller-hardware-in-loop And Power-hardware-in-loop With Progressive Levels Of Representative Power System Components Physically Instantiated). When Implementing A Tem Based Control Scheme, The Overall Power System Should Increase Installed Power Generation Available To Mission And Auxiliary Loads; Reduce Power System Design Margins; Hone The Installed Stored Energy Required For Mission Critical Capability; And Allow Higher Power Transients (ramp Rates And Step Loads). Other Areas Of Interest To The Navy With Respect To Controls Include Improvements To Traditional Machinery Control And Automation, Advanced Power Management, Cyber Security, And Advanced Controls For Distributed Shared Energy Storage And Maintaining Electrical System Stability. The Navy Is Also Interested In Non-intrusive Load Monitoring, Power System Data Analytics, Real Time System Monitoring And Onboard Analysis And Diagnostics Capabilities. 4.3.8 System Interplay, Interfacing, And Integration increasingly, The Navy Is Recognizing The Need For Incorporating Flexibility And Adaptability Into Initial Ship Designs And Recognizing That The Integration Of New Systems And The Ability To Rapidly Reconfigure Them Will Be An Ongoing Challenge Throughout A Platform's Life Cycle In Order To Maintain Warfighting Relevancy. The Ability To Support Advanced Electrical Payload Warfighting Technologies Requires Not Only Power And Energy Systems Delivered With The Flexibility And Adaptability To Accommodate Them, But A Npes Engineering Enterprise With The Capability And Capacity (knowledge, Labor, And Capital) For Continuous Systems Integration. The Navy Can More Affordably Meet This Challenge By Shifting As Much Effort As Possible Into The Computational Modeling And Simulation Regime. an Integrated Power System (ips) Provides Total Ship Electric Power Including Electric Propulsion, Power Conversion And Distribution, Energy Storage, Combat System Support And Ship Mission Load Interfaces To The Electric Power System. Adding Energy Storage And Advanced Controls To Ips Results In An Integrated Power And Energy System (ipes) In Order To Accommodate Future High Energy Weapons And Sensors. The Ipes Energy Magazine Is Available To Multiple Users, And Provides Enhanced Power Continuity To The Power Distribution System. The Flexibility Of Electric Power Transmission Allows Power Generating Modules With Various Power Ratings To Be Connected To Propulsion Loads And Ship Service In Any Arrangement That Supports The Ships Mission At The Lowest Total Ownership Cost (toc). systems Engineering In Ips/ipes Is Focused On Increasing The Commonality Of Components Used Across Ship Types (both Manned And Unmanned) And In Developing Modules That Will Be Integral To Standardization, Zonal System Architectures, And Generic Shipbuilding Strategies With Standard Interfaces That Are Navy-controlled. Ipes Offers The Potential To Reduce Signatures By Changing The Frequency And Amplitude Of Acoustic And Electromagnetic Emissions. Integrated Energy Storage Can Reduce Observability By Enabling The Reduction And Elimination Of Prime Movers, Thereby Reducing Thermal And Acoustic Signatures. The Modules Or Components Developed Will Be Assessed For Applicability Both To New Construction And To Back-fit Opportunities That Improve The Energy Efficiency And Mission Effectiveness. areas Of Navy Interest Are To Continuously Improve Ips/ipes By Performing Analysis, Modeling And Simulation, Life Cycle Cost Analysis, Producibility Studies, Module Development, Ship Integration Studies, Architecture Design, Ship Electric Architectures And Support For High Power Weapons Systems Requirements, And Related Efforts. High Level Power System Architectures Are Based On Mvac And Mvdc Power With Attributes Of Power Density, Fault Management, Capability And Affordability. For Ship Service Electrical Loads, The Architecture Includes Zonal Electrical Distribution Which May Be Either Ac Or Dc, Depending Upon The Specific Application. In Addition To A Full Ipes Or Ips Implementation, Hybrid Electric Drive (hed) Where Mechanical Propulsion Is Augmented By Rotating Electric Machinery, Or Additional Power Generation Or Energy Storage May Be Of Interest. The Navy Desires To Understand The Performance And Cost Trade Space That Is Available For The Various Options Of Architecture; Component, System And Controls Technologies; Functional Allocations; And Interfaces. Also Of Interest Are Technologies That Result In Significant Energy Efficiency, Thermal Improvements, Power Density Improvements And/or Carbon Footprint Improvements Over Existing Propulsion And Power System Technologies. Another Area Of Interest For The Navy Is The Interface Definition Between Unique Electrical Loads And The Power System, And The Provision Of Specialty Power To Optimize That Load Interface. Among The Special Load Interfaces That Might Require Development Are Support For Pulsed Power Weapons And Sensors Such As Radar Power Supplies, Electromagnetic Launchers (for Example Electromagnetic Railgun), And Advanced Laser Systems, All Of Which Would Benefit From Optimized Integration With The Shipboard Power System. the Approach To Prototype Hardware Developed Under This Baa Is That It Fosters Modularity And Scalability (so That Families Of Products May Be Leveraged To Multiple Potential Applications) And Shall Accommodate An Open System Architecture Where Interfaces Are Well Defined And Mutually Accepted. The Navy Is Interested In Both Near Term Solutions That Have The Potential For Rapid Transition To A High Technology Readiness Level (trl) As Well As Longer Term Technology Pushes That Advance The Science And Would Enable A Future Compact Shipboard System. Risk Reducing Technology Prototype Demonstrations In The Near Term Are Encouraged. An Evaluation Of Emerging Technologies For Ship Applications (such As Energy Storage, Support For High Energy Weapons, Support For High Power Radars, High-speed Generators, And Advanced Power Electronics) To Determine Future Feasibility And Development Requirements Is Also Of Great Interest. Development Of Advanced Design Tools And Power System Specifications And Standards Is Also Key To Ensuring New Power Systems Will Integrate Aboard Ship. The Navy Is Interested In A Model-based Approach To Power System Engineering, From Early Concept System Architecture Trade Studies And Trade-space Exploration, To Production-ready Performance Specifications For Component And Systems Acquisitions. Particular Technologies And System Concepts Will Need To Be Evaluated In A Common Set Of Modeling Contexts And Environments Standardized Across The Navy Power System Engineering Enterprise. Modeling-enabled Evaluation Of Technology Alternatives And Performance Of System-level Trade Studies Requires That Models Be Delivered With A Sufficient Pedigree Supported By Analysis, Verification, And Validation (e.g., By Subscale Hardware Demonstrations) To Prove The Applicability Of The Models For The Standardized Modeling Contexts And Environments (model Based System Engineering). 5. Point(s) Of Contact all White Papers Shall Be Submitted To All Parties Identified Below: pms 460 Technical Poc: Josh Cushenette joshua.j.cushenette.civ@us.navy.mil navsea 0241 Poc: ms. Sakeena Siddiqi, Procuring Contracting Officer sakeena.s.siddiqi@us.navy.mil mr. Tyler Pacak, Contracting Specialist tyler.pacak@navy.mil iii. Award Information the Amount And Period Of Performance Of Each Selected Proposal Will Vary Depending On The Research Area And The Technical Approach To Be Pursued By The Selected Offeror. iv. Eligibility Information all Responsible Sources From Academia And Industry May Submit White Papers Under This Baa. Awards Under This Baa Will Likely Be Cost Plus Fixed Fee (cpff) And Thus Offerors Are Required To Have A Defense Contract Management Agency (dcma) / Defense Contract Audit Agency (dcaa) Approved Accounting System To Be Eligible For Award Or Evidence That A Pre-award Survey Has Been Initiated With Dcma/dcaa. v. Application And Submission Information 1. Application And Submission Process "white Papers" Are Desired By Navsea In Response To This Solicitation.all White Papers Shall Be Submitted Tonavseavia Email To The Following Address: Joshua.j.cushenette.civ@us.navy.mil. Hard Copy Submissions Are Not Accepted. Those Offerors With White Papers Considered To Have Merit Will Be Requested To Prepare Full Proposals For The Planned Effort As Specified Below. Receipt Of All White Papers Will Be Acknowledged By The Technical Point Of Contact Listed Above. White Papers Will Be Retained By The Navy And, Should An Application And Associated Funding Be Identified For The Concept Proposed, Additional Responses Will Be Requested Of The Offeror. 2. General Information For White Papers/full Proposals the White Papers And Proposals Submitted Under This Baa Are Expected To Be Unclassified. White Paper And Proposal Submissions Will Be Protected From Unauthorized Disclosure In Accordance With Far 15.207, Applicable Law, And Department Of Defense (dod)/department Of Navy (don) Regulations. Offerors Are Expected To Appropriately Mark Each Page Of Their Submission That Contains Proprietary Information. 2.1. White Papers 2.1.1 White Paper Format paper Size Shall Be No Larger Than 8.5" X 11" Paper With No Less Than 1" Margins On All Sides. The Font Shall Not Be Less Than 12 Point. The Format Of The Submission Shall Be One Electronic Copy In Microsoftword Or Excel Compatible Or .pdf Format. The Page Limit For White Papers Shall Be No Longer Than Twenty-five (25) Pages And Only Contain Information Necessary To Describe The Proposed Technical Concept And Comply With Content Requirements For The White Papers Stated Herein. 2.1.2 White Paper Content 2.1.2.1 Cover Page the Cover Page Shall Be Labeled "white Paper," And Shall Include The Baa Number, Proposed Title, Thecompany Technical/administrative Points Of Contact With Telephone Numbers And E-mail Addresses, The Company Commercial And Government Entity (cage) Code, Which Module Or Modules The White Paper Is Relevant To From The Research Opportunity Section Above (section Ii Paragraph 4), And The Names And Contact Information (if Known) Of The Assigned Dcma Administrative Contracting Officer (aco). 2.1.2.2 Technical Concept/naval Relevance the Technical Concept Shall Include A Description Of The Technology Innovation And Associated Technical Risk Areas. This Section Also Includes A Description Of The Potential Naval Relevance And Contributions Of The Proposed Effort To Improvement In The Performance Of Npes As Defined In The Npes Tdr. This Section May Include A Plan For Demonstrating And Evaluating The Operational Effectiveness Of The Offeror's Proposed Products Or Processes In Field Experiments And/or Tests In A Simulated Environment. 2.1.2.3 Capabilities; Related Experience And Past Performance, And Facilities the Capabilities Section Shall Describe Past Experience And Facilities That Demonstrate Yourcompany Ability To Complete The Scope Identified In The White Paper. This Section Shall Include Evidence Of The Company's Capabilities To Demonstrate The Technology Innovation Proposed. Offerors Shall Provide All Relevant Past Performance For Similar Or Related Work Under Contracts Currently Being Performed Or Completed During The Last Three (3) Years. The Offeror May Include Federal, State And Local Government And Private Sector Contracts. Offerors That Represent Newly Formed Entities, Without Prior Contract Experience, Should Identify Previous Contract And Subcontract Experience For All Principal Investigators Identified In The Proposal. This Section Will Not Be Counted Against The Page Limits Noted In Paragraph 2.1.1 Above. The Following Information For Each Such Contract Shall Be Provided: a. Contract Number b. Customer/agency c. Contracting Officer And Technical Point Of Contact (names And Phone Numbers) d. Brief Description Of Scope Of Work And Deliverables e. Contract Type f. Award Price/final Price g. Period Of Performance 2.1.2.4 Cost And Development Schedule the White Paper Should Identify The Total Estimated Cost And The Notional Development Timeline Of The Effort Proposed In The White Paper And A Brief Rational For How You Established This Rough Order Of Magnitude (rom) Cost Estimate. The Page Limit For The Estimated Cost And Schedule Information Shall Not Exceed One (1) Page; No Larger Than 8.5" X 11" When Printed On Paper With No Less Than 1" Margins On All Sides; And The Font Shall Not Be Less Than 12 Point. The Estimated Cost And Schedule Section Will Not Be Counted Against The Page Limits Noted In Paragraph 2.1.1 Above. For Planning Purposes, Depending Upon The Nature Of The Technology Being Proposed, A Contract That May Result From The White Paper Could Be Staged Using Multiple Phases, Starting With Concept Exploration And Technology Characterization. Should The Concept Prove Meritorious, Options May Be Included To Take The Technology/approach Through A Design And Prototype/software Build. The Total Potential Contract Period Of Performance Cannot Exceed Five (5) Years. 2.1.2.5 Assertion Of Data Rights include Here A Summary Of Any Proprietary Rights (limited/restricted) To Pre-existing Results, Prototypes, Or Systems Supporting And/or Necessary For The Use Of The Research, Results, And/or Prototype. If There Are Proprietary Rights, The Offeror Must Explain How These Affect Its Ability To Deliver Subsystems For Integration. Additionally, Offerors Must Explain How The Program Goals Are Achievable In Light Of These Proprietary And/or Restrictive Limitations. If There Are No Claims Of Proprietary Rights In Pre-existing Data, This Section Shall Consist Of A Statement To That Effect. In Order For A Data Rights Assertions List To Be Accepted By The Government And Included As An Attachment To A Contract, The Dfars (252.227-7013 And 252.227-7014) Requires That The Information Be Listed In A Table Having Four Columns. In The First Column, Technical Data To Be Furnished With Restrictions, For Non-commercial Technical Data Items, Both The Item And The Technical Data Pertaining To That Item Must Be Listed. Also, The Assertion Must Be Made At The Lowest Component Level. And Since Technical Data Is Defined As "recorded Information Of A Scientific Or Technical Nature", A Document Where The Technical Data Is Recorded Must Also Be Listed. This Is Usually, But Not Always, A Drawing Number. Non-commercial Computer Software Items Should Similarly Be Listed At The Lowest Practicable Subroutine Level And Should Also List A Version Number. 2.1.2.6 Accounting System Documentation the White Paper Shall Include Evidence Of An Approved Accounting System Or Evidence That A Pre-award Survey Has Been Initiated With Dcma/dcaa For An Approved Accounting System. 2.2 Full Proposals Format And Content once A White Paper Topic Has Been Selected To Proceed To The Next Step, The Contracting Officer Will Issue A Request For Proposal (rfp) Letter With Additional Detail On The Required Content Of The Proposal, Page Limitations, And Due Dates. The Rfp Letter Will Also Provide Details Of The Notional Statement Of Work For The Effort, Including A Level Of Effort For Related Engineering Services As Described Above; Any Optional Phases; A Description Of The Required Deliverable Data; And The Required Contents And Details Of The Cost Volume. 2.2.1 Associated Engineering Services the Potential Contract, At The Option Of The Government, May Also Include The Services Of Qualified Engineers/technicians And Management Functions To Perform Engineering Support For Follow-on Investigations, Additional Trade Studies, Participation In Navy Directed Interface Working Groups (iwg) To Assess The Technology Implementation In Shipboard Applications, And Hardware Evaluations To Determine The Effectiveness Of The New Technologies Developed Under The Basic Effort. This Level Of Effort Shall Not Be Included In The White Paper Submission, But May, At The Option Of The Government, Be Included In Any Resultant Contract. The Nature Of The Services To Be Performed Shall Be Integrally Related To The Core Scope Of The Contract, Shall Form A Logical Extension Of The Work Otherwise Performed (such As Completion Of Testing Of Articles Developed Or Extending The Performance Capability Of The Articles Developed), Or Shall Provide Amplifying Details Of The Articles Or Technologies Beyond That Otherwise Required And Shall Result In A Specific End-product, Such As A Report. Funding For Engineering Services May Be From R&d, Ship Construction, Operation & Maintenance; Or Other Procurement Sources As May Be Appropriate For The Follow-on Activity Required, But Shall Not Be Used For Production Of Any Technology Proposed. vi. Evaluation Information 1. Evaluation Criteria 1.1 White Papers evaluation Of The "white Papers" Will Be Based On A Competitive Selection Resulting From A Scientific Review Using The Following Evaluation Criteria: criteria 1: Overall Scientific And Technical Merits Of The Concept Proposed And The Potential Naval Relevance And Contributions Of The Effort To The Improved Performance Of Npes Modules And Architectures Within A Reasonable Development Schedule. criteria 2: Potential Risks To The Development And Future Acquisition Associated With The Assertion Of Data Rights. criteria 3: Capabilities; Related Experience And Past Performance; And Facilities criteria 4: Potential Risks To The Development Associated With The Length Of The Development Schedule And The Availability Of Funds To Complete All Proposed Tasks. selection Of The Offeror(s) From Which Rfps Will Be Issued Will Be Based Upon Thegovernments Assessment Of The Criteria Above And The Availability Of Funds To Accomplish The Proposed Effort. White Papers Submitted Under This Baa Will Be Protected From Unauthorized Disclosure In Accordance With Far 3.104-5 And 15.207. The Cognizant Government Experts Will Perform The Evaluation Of Technical Proposals. 1.2 Ratings Used For Scientific Review 1.2.1 Criteria 1 overall Scientific And Technical Merits And Potential Naval Relevance Of The Concept. rating = Excellent: Research Proposal Demonstrates High Potential For Providing Technological Advancement Relative To The Baselines Described In The 2019 Npes Tdr With A Reasonable Amount Of Developmental Risk. Research Proposal Demonstrates High Potential For Direct Application To A Future Npes Ship And/or Will Significantly Improve The Performance Of Npes Modules And/or Architectures. rating = Good: Research Proposal Demonstrates Moderate Potential For Providing Technological Advancement Relative To The Baselines Described In The 2019 Npes Tdr With A Reasonable Amount Of Development Risk. Research Proposal Demonstrates Moderate Potential For Direct Application To A Future Npes Ship And/or Will Probably Improve The Performance Of Npes Modules And/or Architectures. rating = Poor: Research Proposal Demonstrates Low Potential For Providing Technological Advancement Relative To The Baselines Described In The 2019 Npes Tdr With A Reasonable Amount Of Development Risk And/or Have An Unreasonable Amount Of Development Risk. Research Proposal Demonstrates Low Potential For Direct Application Of A Future Npes Ship And/or Will Not Significantly Improve The Performance Of Npes Modules And/or Architectures. 1.2.2. Criteria 2 potential Risks To The Development And Future Acquisition Associated With The Assertion Of Data Rights. rating = Excellent: There Is Low Or No Risk That The Level Of Data Rights Proposed Would Limit Thegovernments Ability To Use The Technical Data Generated During The Performance Of The Contract As Part Of A Technical Data Package For Future Competitive Development Or Production Efforts. rating = Good: There Is Moderate Risk That The Level Of Data Rights Proposed Would Limit Thegovernments Ability To Use The Technical Data Generated During The Performance Of The Contract As Part Of A Technical Data Package For Future Competitive Development Or Production Efforts. rating = Poor: There Is High Risk That The Level Of Data Rights Proposed Would Limit Thegovernments Ability To Use The Technical Data Generated During The Performance Of The Contract As Part Of A Technical Data Package For Future Competitive Development Or Production Efforts. 1.2.3 Criteria 3 capabilities; Related Experience And Past Performance; Facilities; Techniques; And Qualifications, Capabilities And Experience Of The Proposed Principal Investigator / Team Leader. rating = Acceptable: Based On The Offerors Performance Record, The Government Has A Reasonable Expectation That The Offeror Will Successfully Perform The Required Effort, Or The Offeror's Performance Record Is Unknown. In The Case Of An Offeror Without A Record Of Relevant Past Performance Or For Whom Information On Past Performance Is Not Available Or So Sparse That No Meaningful Past Performance Rating Can Be Reasonably Assigned, The Offeror May Not Be Evaluated Favorably Or Unfavorably On Past Performance (see Far 15.305 (a)(2)(iv)). Therefore, The Offeror Shall Be Determined To Have Unknown (or "neutral") Past Performance. In The Context Of Acceptability/unacceptability, A Neutral Rating Shall Be Considered "acceptable." rating = Unacceptable: Based On The Offerors Performance Record, The Government Does Not Have A Reasonable Expectation That The Offeror Will Be Able To Successfully Perform The Required Effort. 1.2.4. Criteria 4 potential Risks To The Development Associated With The Length Of The Development Schedule And The Availability Of Funds To Complete All Proposed Tasks. rating = Excellent: There Is Low Or No Risk That The Technology Development Timelines And The Availability Of Funds Necessary To Conduct The Development Would Not Support The Governments Ability To Transition The Technology Development For Future Competitive Development Or Production Efforts. rating = Good: There Is Moderate Risk That The Technology Development Timelines And The Availability Of Funds Necessary To Conduct The Development Would Not Support The Governments Ability To Transition The Technology Development For Future Competitive Development Or Production Efforts. rating = Poor: There Is High Risk That The Technology Development Timelines And The Availability Of Funds Necessary To Conduct The Development Would Not Support The Governments Ability To Transition The Technology Development For Future Competitive Development Or Production Efforts. vii. Security Classification in Order To Facilitate Intra-program Collaboration And Technology Transfer, The Government Will Attempt To Enable Technology Developers To Work At The Unclassified Level To The Maximum Extent Possible. If Access To Classified Material Will Be Required At Any Point During Performance, The Offeror Must Clearly Identify Such Need Prominently In Their Proposal. If Offerors Use Unclassified Data In Their Deliveries And Demonstrations Regarding A Potential Classified Project, They Should Use Methods And Conventions Consistent With Those Used In Classified Environments. Such Conventions Will Permit The Various Subsystems And The Final System To Be More Adaptable In Accommodating Classified Data In The Transition System. contracting Office Address: n00024 Naval Sea Systems Command, Dc 1333 Isaac Hull Avenue S.e. Washington Navy Yard, Dc contracting Office Address: sea 02 1333 Isaac Hull Avenue Se washington Navy Yard, District Of Columbia 20376 United States place Of Performance: tbd united States primary Point Of Contact: ms. Sakeena Siddiqi, Procuring Contracting Officer sakeena.s.siddiqi.civ@us.navy.mil secondary Point Of Contact: mr. Tyler Pacak, Contract Specialist tyler.pacak@navy.mil

Details: 24 Apr 2024 Call 005, Call Sensors &cyber Electro Magnetic Activities Baa 19 Mar 2024call 003 Amendment 5minor Administrative Changes (owning Organization Updated From Air Force Life Cycle Management Center Architecture And Integration Directorate (aflcmc/xa) To Command, Control, Communication For Battle Management (aflcmc/c3)); Updated Contact Information In Section 1; Additional Proposal Due Dates Added In Section 5. 19 Dec 2023 Request For Information Battlespace Command & Control Center (bc3) Software Acquisition (see Attachments). 9 Aug 2023request For Information Content Delivery Network (see Attachments). 8 April 2023 Call 002 Request For Information (see Attachments). 10 February 2022 Call 001 / Call 002 Amendment 5as Of This Date, The Government Is No Longer Accepting New Proposals / Concept Papers In Response To These Calls. The Government Will Issue A Further Amendment To These Calls Or A Separate Call If It Desires To Request Additional Proposals / Concept Papers In The Future. 3 June 2021call 001 Amendment 4 Primary And Alternate Contacts Updated. 3 June 2021call 002 Amendment 4 Minor Administrative Changes (owning Organization Updated From Chief Architect’s Integration Office Or Caio To The Air Force Life Cycle Management Center Architecture And Integration Directorate Or Aflcmc/xa), Abms Changed To Jadc2, Alternate Contact Updated, Reference To Baa Guide For Industry Deleted, Basic Nist Sp 800-171 Dod Assessment Requirements Included, Due Dates Updated, On-ramp Exercise Paragraph Deleted. 3 June 2021call 003 Amendment 4 Minor Administrative Changes (owning Organization Updated From Chief Architect’s Integration Office Or Caio To The Air Force Life Cycle Management Center Architecture And Integration Directorate Or Aflcmc/xa), Abms Changed To Jadc2, Alternate Contact Updated, Due Dates Updated, On-ramp Exercise Paragraph Deleted. 15 April 2021 Call 001 Amendment 3: Minor Administrative Changes (owning Organization Updated From Chief Architect’s Integration Office Or Caio To The Air Force Life Cycle Management Center Architecture And Integration Directorate Or Aflmcm/xa), Abms Changed To Jadc2, Reference To Baa Guide For Industry Deleted, Basic Nist Sp 800-171 Dod Assessment Requirements Included, Due Dates Updated, On-ramp Exercise Paragraph Deleted 20 November 2020 Call 003:attachments Added 20 November 2020 Broad Agency Announcement Guide: Updated To Attachments/links 10 November 2020 Broad Agency Announcement Guide: Added To Attachments/links 10 November 2020call 003:section 3 Updated To Include On-ramp Exercise #4 Paragraph 10 November 2020call 002:broad Agency Announcement (baa) Guide For Industry Is Included In The Attachments/links Section; Section 4 Updated To Include On-ramp Exercise #4 Paragraph 10 November 2020call 001:no Updates. Reattached Amendment 2 As Posted 30 September 2020. 30 September 2020:call 001:updated Contact Information For “primary” In Section 1; Basis Of Proposal Evaluation, Technical Criteria And Past Experience Criteria Updated In Section 3; Proposal Due Dates And Award Notices Updated In Section 3; Planned Demonstrations/exercises/on-ramp Events Updated In Section 4 30 September 2020:call 002:proposal Due Dates And Award Notices Updated In Section 3; Planned Demonstrations/exercises/on-ramp Events Updated In Section 4 30 September 2020:call 003:updated Contact Information For “primary” In Section 1; Planned Demonstrations/exercises/on-ramp Events Updated In Section 3; Proposal Due Dates Updated In Section 5 30 September 2020:frequently Asked Questionswere Updated 10 June 2020: Model Idiq Contract Added To Attachments And Links. 08 June 2020: : Call 001:updated Contact Information For “alternate” In Section 1; Added Not-to-exceed Amount In Section 3, Volume 2 Paragraph; Added “section 4: Planned Demonstrations/exercises/on-ramp Events”; Model Id/iq Contract Added As An Attachment 08 June 2020: : Call 002:updated Contact Information For “alternate” In Section 1 And “section 4: Planned Demonstrations/exercises/on-ramp Events” Added 08 June 2020: : Call 003:updated Contact Information For “alternate” In Section 1 03 June 2020: Administrative Update To The Include 'fa8612 Aflcmc Caio' As The Issuing Office. 24 April 2020: Amendment 003 Issued To Publish Call 003 Requesting Responses For Technologies And Solutions To Support Future Abms Technology Demonstrations At No Cost Via A Cooperative Research And Development Agreement (crada.) 10 March 2020: Amendment 002 Issued To Publish A Frequently Asked Questions (faq) Documentto Address Questions Received On Calls 001 And 002. 03 March 2020: Amendment 001 Issued To Publish Call 002 Requesting Responses For Ideas, Technologies And Solutions To Support The Abms. 28 February 2020: Original Announcement Issued To Publish The Baa And Call 001 Requesting Responses To Participate On The Abms/id/iq Contract. the Air Force Lifecycle Management Center, Advanced Battle Management Systems (abms) Chief Architect Integration Office (caio) Releases The Broad Agency Announcement For Advanced Battle Management Systems (abms) announcement Number: Baa-aflcmc_caio-2020-0001 issue Date: 28 February 2020 note this Is Only An Announcement; Please Do Not Submit Proposals In Response. Subsequent Calls Will Be Issued Under This Announcement To Solicit Proposals For Specific Efforts. Please Refer To The Attachment Section Of This Announcement For The Calls. publication Of This Announcement Does Not Obligate The Dod To Review Any White Papers Submission Beyond An Initial Administrative Review, Or To Award Any Specific Project, Or To Obligate Any Available Funds. executive Summary in Order To Effectively Engage Peer And Near-peer Adversaries, The U.s. Air Force Needs To Develop, Acquire And Operate Systems As A Unified Force Across All Domains (air, Land, Sea, Space, Cyber, And Electromagnetic Spectrum). The Department Of The Air Force Rapid Capabilities Office (dafrco) In Partnership With The Air Force Life Cycle Management Center Command, Control, Communication For Battle Management (aflcmc/c3)seeks To Develop A Cross-cutter Portfolio Of Complimentary/ Linked Projects And Programs To Support Joint All-domain Command & Control (jadc2) And The Advanced Battle Management System (abms). The Air Force Intends To Facilitate The Rapid Exploration And Maturation Of Innovativetechnologies. The Air Force Will Support Future Operations By Providing The Critical Surveillance, Tactical Edge Communications, Processing, Networking, And Battle Management Command And Control Capabilities To The Joint Warfighting Force. Abms Is Not Envisioned As A Single Program Of Record, But Rather An Open Architecture Family Of Systems That Enables Capabilities Via Multiple Integrated Platforms. Abms Will Realize The Vision Of Jadc2 To Enhance And Expand Capabilities By Enabling Any Sensor To Inform Any Shooter In Any Domain—land, Sea, Air, Space, And Cyberspace. In An Interview With Air Force Magazine In April 2019, General Goldfein Stated, “it Is A Significant Move For The Air Force To Shift From A Platform Solution On Command And Control And Battle Management To A Network Solution Going Forward, And Our Future In The Business Of Joint Warfighting Is To Ensure That We’re Taking Every Sensor And Every Shooter And Connecting Them Together To Overwhelm An Adversary”. Our Aim Is To Have Intelligence And Targeting Data Transformed Into Timely And Actionable Information Through Trusted Networks And Intelligent Algorithms That Enable Our People To Focus On Decisions. In This Construct, Information Is A Service, Rather Than A Platform, And The Layers Of Sensing And The Communication Pathways Will Provide Reliability And Assurance In Contested Environments. general Information federal Agency Name: Aflcmc/c3 broad Agency Announcement Title:advanced Battle Management System broad Agency Announcement Type: This Is The Initial Announcement. broad Agency Announcement Number: Baa-aflcmc_caio-2020-0001 closing Date:this Baa Will Remain Open Until 31 December 2026, Unless Superseded, Amended, Or Cancelled. Periodically, But No Less Than Annually, The Baa Will Be Assessed And Updates Will Be Issued Via Amendment. baa Calls:as Applicable, Individual Calls For White Papers Or Proposals For Specific Technology Areas Of Interest Will Be Issued Under This Baa Announcement. Baa Calls May Utilize The 1-step Or 2-step Process For Propsals. Each Call Will Identify: the Process Being Used; specific Details Regarding The Call Technical Topic Area; submission Instructions, To Include Due Dates; review, Evaluation And Selection Criteria; And any Other Relevant Information Specific To The Call. address Contracting Questions To The Contracting Poc: ms. Katie Rasmussen kathleen.rasmussen.2@us.af.mil phone Number: (937) 255-8421 type Of Contract/instrument: The Air Force Reserves The Right To Award The Instrument Best Suited To The Nature Of Research Proposed. Accordingly, The Government May Award Any Appropriate Contract Type Under The Far Or Other Transaction (ot) For Prototype. rights In Technical Data, Computer Software And Computer Software Documentation:it Is The Government's Intention To Acquire Only The Delivery Of Technical Data And Computer Software And The Rights In That Technical Data And Computer Software That Is Necessary To Satisfy Agency Needs, And This Will Be Negotiated On A Case-by-case Basis. industry Classification And Business Size Standards:the North American Industry Classification System (naics) Code For This Announcement Is 541715 - Research And Development Physical, Engineering, And Life Sciences With A Small Business Size Standard Of 1000 Employees. eligibility Information:although Participation Is Encouraged, No Portion Of This Baa Is Set-aside For Small Businesses, To Include Veteran-owned, Service-disabled Veteran-owned, Historically Underutilized Business Zone (hubzone) Program, Small Disadvantaged, Women-owned, And Historically Black Colleges And Universities And Minority Institutions. Foreign Or Foreign-owned Contractors Are Advised That Their Participation, While Not Precluded, Is Subject To Foreign Disclosure Review Procedures. Foreign Contractors Should Contact The Primary Contracting Poc Identified In Each Specific Call If They Contemplate Responding To This Baa. disclaimers/notifications:the U.s. Air Force Reserves The Right To Select All, Some, Partial White Paper Content, Or None Of The White Papers Received In Response To This Baa Throughout Its Term. The U.s. Air Force Reserves The Right To Initiate Clarification Of White Papers And Other Material Submitted In Response To This Baa With Offerors When Deemed Necessary. All Awards Are Subject To The Availability Of Funds. Offerors Will Not Be Reimbursed For White Paper Development Costs. There Shall Be No Basis For Claims Against The Government As A Result Of Any Information Submitted In Response To This Baa. White Papers And Other Material Submitted With The White Paper For Review Purposes Under This Baa Will Not Be Returned.