ELI HU Nonprofit Kft Tender

Contract notice: Purchase of CNC machine tools and accessories Procurement of 1 CNC simultaneous 5-axis machining center and its accessories, the most important parameters of which are the following: TT160 with contact type fixed cable tool gauge or technically equivalent - high precision, low tactile power, wireless workpiece gauge, (+/- 1 µm) or technically equivalent - Simultaneous 5-axis machining capability - Turntable with a minimum size of 600x600mm or a minimum of Ø600mm, a minimum of 14 T-slots and a fixed min. With 800-1000x500-800 table and a minimum of 14 T-slots. - Fixed table and rotary table in one plane - DIN69871 with spindle SK40 - a minimum of 54 tool magazines - Strokes X / Y / Z: minimum 1500/500/450 - Cradle and rotary table with precision worm drive - Cradle range: minimum +/- 90 degrees - Chip removal system - Disc oil separator - Continuous C axis - X / Y / Z glass strip absolute measuring system, air overpressure protection on the slats - min. 14,000 rpm spindle, direct drive: in-line - Spindle Z-direction elongation thermal compensation (Eg: Oil cooling in the spindle with oil cooling unit or air cooling or water cooling with software compensation). The elongation is a maximum of 0.03 mm over the full speed range after 40 minutes of operation - with postprecessor and workspace 3 D model for Edgecam software. Accessories of the type, quality and quantity specified in the technical description published on the public interface of the EQF and operating in a manner compatible with the Device. The winning bidder is obliged to provide a training service for 4 people in a 2x8 hour time frame. As part of its training obligation, the seller is also obliged to present the operation of the postprocessor to 1 person in a time frame of 1x8 hours. Training tasks must be carried out after commissioning. Under the warranty obligation, the contractor is obliged to provide the necessary and complete maintenance service for the Asset during the warranty period - every six months, ie a total of 4 times during the performance period. The Device must be delivered calibrated as verified by acceptance tests (FAT and SAT) related to the on-site installation. EUROPEAN UNION (EU),