Advertisement Tenders

Details: The U.s. Army Corps Of Engineers, Japan District (poj) Is Providing A Pre-solicitation Notice Pursuant To Far 36.213-2 For An Upcoming Invitation For Bid (ifb). This Is Not A Solicitation. project Information project Title: Fy25 Znre224305p2 Improve Military Family Housing Paip 9 Phase 2 project Location: Yokota Air Base, Japan project Naics: 236220 Commercial And Industrial Building Construction project Magnitude: Between ¥2,500,000,000 And ¥10,000,000,000 (japanese Yen) project Description: provides Whole House Interior And Exterior Modernization, Renovation And Repair Of Thirty-two (32) Housing Units At Yokota Air Base (o-1 To O-5 Three-bedroom Military Family Housing Townhouse Units). anticipated Construction Performance Period: 18 Months solicitation Information: 1. Procurement Method: The Government Will Issue An Invitation For Bid (ifb) Solicitation. 2. The Government Anticipates Issuing The Solicitation February 2025. The Solicitation When Issued, Will Identify The Site Visit Date, Rfi And Bid Submission Due Date. All Final Ready To Advertise Solicitation Documents, Specifications And Drawings Will Be Posted On The Procurement Integrated Enterprise Environment (piee) At Piee.eb.mil When Issued. It Is The Responsibility Of Interested Vendors To Monitor Piee For Issuance Of The Solicitation And/or Amendments. 3. The Government Intends To Award A Firm-fixed-price Construction Contract As A Result Of This Ifb No Later Than 4q Fy2025. all Interested Companies Shall Be Actively Registered In The System For Award Management (sam) Database In Order To Be Eligible For Award Of Government Contracts. Information On Registration And Annual Confirmation Requirements May Be Found At Http://www.sam.gov. For A Joint Venture, The Joint Venture As An Independent Entity Must Be Registered In Sam As Such. bidder Eligibility. this Contract Will Be Performed In Its Entirety In The Country Of Japan And Is Intended Only For Local Sources. Only Local Sources Will Be Considered Under This Solicitation. Local Sources Are Sources (e.g. Corporations, Partnerships, Or Joint Ventures [for A Joint Venture, The Joint Venture As An Independent Entity Must Satisfy The Local Source Requirements Or, In The Alternative, Each Member Of The Joint Venture Must Individually Satisfy The Local Source Requirements]) That Are Physically Located In Japan And Authorized (i.e. Licensed And Registered) To Perform In Japan, The Type Of Construction Work Specific In This Solicitation. Specifically, A Prospective Bidder Must Be Duly Authorized To Operate And Conduct Business In Japan And Must Fully Comply With All Applicable Laws, Decrees, Labor Standards, And Regulations Of Japan During The Performance Of The Resulting Contracts. Bidders Must Be Registered With The Government Of Japan To Do Construction Work In Japan And Possess Necessary Construction Licenses And Permits To Perform Work Required Under This Solicitation At The Time A Bid Is Submitted. Failure To Comply With This Requirement Will Be Cause For Rejection Of Your Bid. Construction License May Be Verified Through The Government Of Japan – Ministry Of Land, Infrastructure, Transport, And Tourism (milt) Https://etsuran2.mlit.go.jp/takken The U.s. Government Will Not Offer “united States Official Contractor” Status Under Article Xiv Of The Us-japan Status Of Forces Agreement (sofa) To U.s. Contractors Normally Resident In The United States; Nor Will The U.s. Government Certify Employees Of Such Contractors As “members Of The Civilian Component” Under Article I(b) Of The Sofa. u.s. Army Corps Of Engineers, Japan District, Camp Zama, Japan contracting Office Address: usace District, Japan attn: Cect-poj unit 45010

Details: Rfq Type Goods Goods Tools & Machinery Reference Number Gd12500664 Title Cordless Grinder With Battery & Charger Description 2 Each X Cordless Grinder With Battery & Charger 2 Each X Sds Drill Bits And Chisel Set 2 Each X Bench Vice 3 Each X Collapsible Ladder Specification* Cordless Angle Grinder With Battery <(>&<)> Charger As Per Specifications Attached And Below. Specification For Cordless Angle Grinder Required Features # Excellent Performance As Powerful As Ac Model With Highly Enhanced Brushless Dc Motor. # Outperforming Performance And Effi¬ciency For Heavy-duty Grinding Applications. # Automatic Speed Control Adjusts Speed And Torque During Operation For Optimum Performance. # Electric Brake For Maximum Productivity And Increased Operator Safety. # Easy-to-hold Grip With Rubber For Anti-skid. # Kickback User Protection Turns The Motor O If Rotation Speed Suddenly Slows Or Wheel Is Forced To Stop. # Battery Fuel Gauge. # Extreme Protection Technology, Electric Brake, Soft Start And Carry Case. # Battery And Charger Sold Separately. General Specifications Application Cutting In The Field Where There Is No Power. Colour Black <(>&<)> Teal Specifications Brushless Power Source Battery Battery Type Li-ion Battery 18v Battery Capacity 6 Ah Charger Type Dc18rc Weight 2.3kg Height 151 Mm Part Number Dga4546zj Included Accessories In Scope Of Supply Two Batteries, Battery Charger, Carry Case, And User Manual Material Metal <(>&<)> Plastic Notes Preferred Device Makita Dga456zj (plus Accessories Listed In Table Above) * Sds Drill Bits And Chisel Set Specs Attached And Below Sds Drill Bit Set No Of Drill Bits 12 No Of Chisels 5 Shank Type Sds Shank Diameter 10mm Bit Diameter 5, 6, 8, 10, 12, 14 Mm Flute Length 4, 4.5, 9, 9.5, 13, 13.3, 16.3, 17 Mm * Bench Vice See Specs Below And Attached. Bench Vice Jaw Width 6 Inch (150mm) Material Ductile Iron (not Cast Iron) Base Swivel Base * Collapsible Ladder See Specs Attached And Below Collapsible Telescopic A Frame Ladder Minimum Length When Extended In Linear Form 5.6m Minimum Length When Extended In A-frame 2.8m Maximum Length When Collapsed 1.05m Delivery Date2025/03/31 Delivery Towater Services Water Services Delivery Address12 Hertzog Boulevard, Cape Town Contact Personmichael Wright Telephone Number0835567954 Cell Number Closing Date2025/03/04 Closing Time12 00 Pm Rfq Submission Fax0000000000 Rfq Submission Fax 2 Buyer Email Addressgd1.quotations@capetown.gov.za Buyer Detailsa.filby Buyer Phone0214009269 Attachments No Attachments Note This Commodity Has Gone Live For Only Quoting On The E-procurement Portal. No Manual Submissions Will Be Accepted For This Commodities. Suppliers Will Need Must Log In To E-services Portal To Access Rfqs. Bids Must Be Compliant With The Preferential Procurement Regulations, 2017 Including But Not Limited To Local Content, Functionality, Price And Preference, Eligibility Criteria And Relevant Statutory Criteria. The Details Of This Are Contained In The Rfq Document And/or The Specification Advertised Via E-procurement. Only Locally Produced Goods Or Locally Manufactured Goods, Meeting The Stipulated Minimum Threshold For Local Production And Content, Will Be Considered, Where Applicable.

Details: Rfq Type Goods Goods Clothing, Ppe & Accessories Reference Number Ga12500340 Title Clothing Items Various Items Description 50 Pair X Boots Safety General Hiker Cstc Brown 4 600 Pair X Gloves Micro-foam Nitr 25cm Blk 11(xxl) Specification* Refer To Ga12500340 Boots - Type Safety Application General Style Type Hiker Toe Construction Type Wide Profile Carbon Steel 459 Toe Cap Must Withstand Impact Load Of 200 Joules Colour Brown Uk Size 4 Fastening Method Lace-up With Nickel-free D-rings Sole Temperature Maximum 90 Degrees Celsius,dual Density Poly Urethane,oil And Acid Resistant Pu/rubber,slip Resistance And Crack Resistance. Upper Material Full Grain Quality Buffalo Leather Lining Breathable And Abrasion Resistant Inner Sole 2mm Foam Removable Insole Board Specifications To Comply To European Norm Iso 20345,testedin Accordance To Satra Standards In Accordance To European Standard 20345 2004 Guideline Wherever Reference Is Made To Any Particular Trade Mark, Name, Patent, Design, Type, Specific Origin Or Producer, Such Reference Shall Be Deemed To Be Accompanied By The Words "or Equivalent". 1. Nb The Municipal Bidding Document 6.1 (mbd 6.1) Is Attached, In Order To Be Eligible For Preference Points Bidders Are Required To Submit A Duly Completed Mbd 6.1 Document With Supporting Documents With Each And Every Rfq Submission, Failure To Submit Will Result In Zero Point Allocation. * Refer To Ga12500340 Gloves - Type Palm And Finger Micro-foam Nitrile Coated Material Nitrile Length 25cm Colour Black Size 11(xxl) Specifications Lightweight, Knitted Wrist, Ultra Grip Surface Or Raised Micro Grip Dots To Increase Durability And Cushioning Breathable.thin Yet Offering High Level Of Mechanical Performance.class Leading Form. Good Fit And Feel, Reducing Hand Fatigue And Increasing Comfort Palm Dip. Standards En 388 4131 Guideline Wherever Reference Is Made To Any Particular Trade Mark, Name, Patent, Design, Type, Specific Origin Or Producer, Such Reference Shall Be Deemed To Be Accompanied By The Words "or Equivalent". Delivery Date2025/02/28 Delivery Tologistics - Ndabeni Store Clothing Ph 021 444 5453 Delivery Address1 25 Oude Molen Road, Ndabeni Contact Personabduraghmaan Gamieldien Telephone Number0214441548 Cell Number Closing Date2025/01/17 Closing Time03 00 Pm Rfq Submission Fax0000000000 Rfq Submission Fax 2 Buyer Email Addressga1.quotations@capetown.gov.za Buyer Detailsr.ross Buyer Phone0214009530 Attachments No Attachments Note On 1 November 2017 The City Of Cape Town Went Live With E-procurement Which Was Piloted With 3 Commodities Clothing, Building Hardware And Is&t. No Manual Submissions Will Be Accepted For These Commodities And Suppliers Must Log In To E-services Portal To Access Rfqs. Bids Must Be Compliant With The Preferential Procurement Regulations, 2017 Including But Not Limited To Local Content, Functionality, Price And Preference, Eligibility Criteria And Relevant Statutory Criteria. The Details Of This Are Contained In The Rfq Document And/or The Specification Advertised Via E-procurement. Only Locally Produced Goods Or Locally Manufactured Goods, Meeting The Stipulated Minimum Threshold For Local Production And Content, Will Be Considered, Where Applicable.

Details: Rfq Type Goods Goods Beverages & Refreshments Reference Number Gf12500365 Title Beverages And Refreshment Description 150 Each X Crinkle Chips 36g 150 Each X Peanuts & Raisins 50g 150 Each X Chocolate Bar 62g 150 Each X Origional Wine Gums 75g 150 Each X Energy Drink 500ml 300 Each X Plastic Clear Packaging 30cm Long Specification* Equivalent To Lay#s Wherever Reference Is Made To Any Particular Trade Mark, Name, Patent, Design, Type, Specific Origin Or Producer, Such Reference Shall Be Deemed To Be Accompanied By The Words "or Equivalent". Nb!!! Please Ensure That You Attach The Technical Data Sheets And Pictures Of The Item Quoted On, To Your Rfq Submission****failure To Adhere To This Requirement, Will Result In Your Offer Being Non-responsive**** Allocation Of Preference Points *nb The Municipal Bidding Document 6.1 (mbd 6.1) Has Been Amended, In Order To Be Eligible For Preference Points Bidders Are Required To Submit A Duly Completed Mbd 6.1 Document With Supporting Documents With Each And Every Rfq Submission. In Order To Qualify For Preference Points, It Is The Responsibility Of The Bidder To Submit A Duly Completed Mbd 6.1 Form (bidders Must Indicate How They Claim Points For Each Specific Goal). Submit Documentary Proof Of Updated Bbbee Certificate/sworn Affidavit And/or Cipc Certificate With Each Rfq Submission To Validate Specific Goals. (if A Bidder Is Registered And Active On The City#s Supplier Database And Has Submitted The Bbbee Certificate/ Sworn Affidavit/ Cipc Certificate, The Submission Of Said Documents Is Not Necessary). It Is Therefore Incumbent On Suppliers To Ensure That Documents Are Kept Updated. Failure To Comply With The Above Will Result In A Zero (0) Allocation For Preference Points. *** Please Ensure That All Required Insurances Such As Your Public Liability, Employers Liability Or Coida And Motor Vehicle Insurance Are Attached And That They Are Up-to-date. If You Utilise Couriers And Do Not Have Motor Vehicle Insurance, Then Please Mention This. Also Ensure That Your Updated Declaration Of Interest And Bbbee Is Attached At All Times** * Equivalent To Simba Peanuts 50g, Peanut/raisins * Chocolate Bar 62g Beacon All-in-one Chocolate Bar * Origional Wine Gums 75g * Energy Drink 500ml Equivalent To Powerade * Equivalent To The Fruit Plactic Packs Delivery Date2025/02/14 Delivery Tosport And Recreation - Maintenance Maintenance Planning Plant Delivery Address01 Cnr Military Road, Cape Town Contact Personrandall Benjamin Telephone Number0832844631 Cell Number Closing Date2025/01/24 Closing Time12 00 Pm Rfq Submission Fax0000000000 Rfq Submission Fax 2 Buyer Email Addressgf1.quotations@capetown.gov.za Buyer Detailsf.shaik Buyer Phone0214006761 Attachments No Attachments Note The Procurement Of The Goods In This Category Is Only Available For Online Quoting. The City Of Cape Town Has Embarked On An Online Quoting System, Via E-procurement, On The E-services Platform. No Manual Submissions Will Be Accepted For These Commodities And Suppliers Must Log In To E-services Portal To Access Rfq Information And To Submit A Quote. Bids Must Be Compliant With The Preferential Procurement Regulations, 2017 Including But Not Limited To Local Content, Functionality, Price And Preference, Eligibility Criteria And Relevant Statutory Criteria. The Details Of This Are Contained In The Rfq Document And/or The Specification Advertised Via E-procurement. Only Locally Produced Goods Or Locally Manufactured Goods, Meeting The Stipulated Minimum Threshold For Local Production And Content, Will Be Considered, Where Applicable.

Details: Dla Distribution Has Identified A Need For Global Rapid Deployment Capabilities To Support Contingency, Emergent, Surge, And Other Distribution/disposition Services, Such As Urgent Global Contingency Responses And Global Humanitarian And Disaster Relief Responses For Dla, Dod And Other Whole Of Government Customers, Which Will Be Advertised Under Solicitation Sp3300-25-r-5001.due To Significant Increases In Operational Requirements In Support Of Military, Contingency, Humanitarian Assistance/disaster Relief (ha/dr), Foreign Disaster Relief (fdr), Defense Support Of Civil Authorities (dsca), And Interagency Support Operations, Dla Distribution And Dla Disposition Services Require A Rapid Response Capable Contractor Work Force That Can Be Called Upon To Perform Dynamic Storage, Distribution, Disposition, And Reutilization Operations Support For Requirements Globally. The Requirements To Be Executed Under This Contract Will Often Be Mission-critical Storage And Distribution Services For The United States (u.s.) Military And Other U.s. Federal Agencies. Requirements Will Primarily Consist Of Contingency, Emergent, Urgent Global Contingency Response, Global Ha/dr Response, Urgent Surge Services At New And Existing Locations And At Locations Where A Government Workforce Is Concurrently Performing, And Other Routine Distribution/disposition Services. A Deployable Warm Contingency Of A Trained, Deployable Workforce With Deployable Mhe Will Be Required Throughout The Duration Of The Contract. The Deployable Warm Contingency Must Be Able To Deploy Globally Within Seven Days To Support Urgent Contingency/humanitarian Requirements. All Supervision And Personnel, Materials, Tools, Equipment, Transportation, And Any Other Items And Services Not Provided By The Government Must Be Provided. Task Orders May Require, But Are Not Limited To, Furnishing Facilities, Equipment, Materials, And Supplies Globally. Task Orders Will Be Performed Simultaneously And At Multiple Sites. Maintaining A Ready And Trained Workforce With The Appropriate Personnel Clearances, It Eligibilities, And Dod Common Access Card (cac), Is Required.the Requirement Is For An Indefinite Delivery Indefinite Quantity Contract With A Five-year Base Ordering Period And A Five-year Optional Ordering Period. The Estimated Ordering Periods Are Shown Below. Five-year Base Ordering Period: January 5, 2026 ? January 4, 2031*five-year Option Ordering Period: January 5, 2031 ? January 4, 2036*includes Three-month Phase-inthis Acquisition Will Be Solicited As An Unrestricted Procurement Under Far Part 15, Contracting By Negotiation. Contract Award Will Be Made On The Basis Of Competition. It Is Anticipated That Contract Award Will Be Made In November 2025.the Naics Code And Size Standard Are 561210 And $47 Million, Respectively. All Documents Related To This Notice Will Be Posted To The Sam.gov Website. Prospective Offerors Are Cautioned Concerning Their Responsibility To Access The Website For Any Amendments/modifications And/or Solicitation Postings Related To This Pre-solicitation Notice. There Will Be No Advance Notification Of Amendment/modification/solicitation Issuance. Prospective Offerors Are Advised To Consult The Website Frequently To Check For The Issuance Of Amendments/modifications And/or Solicitations.the Tentative Timeframe For Issuance Of The Request For Proposal For The Above Stated Requirement Is On Or About February 4, 2025. Any Questions Concerning This Notice Shall Be Directed To The Acquisition Specialist, Scott Lesh At Scott.lesh@dla.mil And Contracting Officer David R. Gilson Jr. At David.gilson@dla.mil. All Questions Should Be Submitted In Writing Via Email To The Above Points Of Contact. Contracting Office Address:5430 Mifflin Ave, Suite 3102a New Cumberland, Pennsylvania 17070-5008united Statesplace Of Performance: Unknownprimary Point Of Contact: Scott Leshscott.lesh@dla.milphone: 717-770-4245alternate Point Of Contact: David R. Gilson Jr.david.gilson@dla.milphone: 717-770-4496

Details: Rfq Type Goods Goods Kitchen Appliances & Accessories Reference Number Gl12500506 Title Unimat Rubber Runner 0.9 M X 10m Description 10 Meter X Unimat Rubber Runner 0.9 M X 10m Specification* Ref Gl12500506 Please Supply And Deliver A Unimat Drainable Rubber Runner. 0.9m X 10m Technical Specification Material Natural Rubber Surface Finish Raised Anti-slip Textured Surface With Holes To Allow Drainage Product Height 10mm Product Weight 4kg +/- 3% Roll Length 10m Operating Temperature -20°c To +160°c Resistance To Chemicals Resistant To Water And Most Mild Acids Environmental Resistance Suitable For Wet And Dry Indoor Environments Installation Method Loose Lay Cleaning Method Hose Down Or Pressure Wash Using A Mild Detergent. Product Performance Impact Resistant Up To 3kg/cm2 Please See Attached Sample Picture. For More Information, Please Contact Trevor Farmer. Trevorwilliam.farmer@capetown.gov.za 0218141874 X 238 Clause - 2.14.1 <(>&<)> 2.15 Provide, On Request By The Cct, Any Other Material That Has A Bearing On The Quotation Offer, The Supplier#s Commercial Position (including Joint Venture Agreements), Preferencing Arrangements, Or Samples Of Materials, Considered Necessary By The Cct For The Purpose Of The Evaluation Of The Quotation. If The Specifications Require The Supplier To Provide Samples/technical Data Sheets, These Shall Be Provided Strictly In Accordance With The Instructions Set Out In The Specification. If Such Samples /technical Data Sheets Are Not Submitted As Required In The Bid Documents Or Within Any Further Time Stipulated By The Cct In Writing, Then The Bid Concerned May Be Declared Non-responsive. #wherever Reference Is Made To Any Particular Trade Mark, Name, Patent, Design, Type, Specific Origin Or Producer, Such Reference Shall Be Deemed To Be Accompanied By The Words "or Equivalent" #nb The Municipal Bidding Document 6.1 (mbd 6.1) Is Attached, In Order To Be Eligible For Preference Points Bidders Are Required To Submit A Duly Completed, Current Dated Mbd 6.1 Document With Supporting Documents With Each And Every Rfq Submission, Failure To Submit Will Result In Zero Point Allocation. Delivery Date2025/03/31 Delivery Toelectricity - Steenbras P S Red1 Plant / Ph 840 4102 Delivery Address0 Hydro Road, Off Sir Lowry's Pass ,gordon's Bay Contact Persontrevor Farmer Telephone Number0218141874 Cell Number Closing Date2025/02/17 Closing Time04 00 Pm Rfq Submission Fax0000000000 Rfq Submission Fax 2 Buyer Email Addressgl1.quotations@capetown.gov.za Buyer Detailsc.williams Buyer Phone0214001789 Attachments No Attachments Note This Commodity Has Gone On E-procurement On 1 August 2018. No Manual Submissions Will Be Accepted For This Commodities. Suppliers Will Need Must Log In To E-services Portal To Access Rfqs. Bids Must Be Compliant With The Preferential Procurement Regulations, 2017 Including But Not Limited To Local Content, Functionality, Price And Preference, Eligibility Criteria And Relevant Statutory Criteria. The Details Of This Are Contained In The Rfq Document And/or The Specification Advertised Via E-procurement. Only Locally Produced Goods Or Locally Manufactured Goods, Meeting The Stipulated Minimum Threshold For Local Production And Content, Will Be Considered, Where Applicable.

Details: Rfq Type Goods Goods Chemicals Reference Number Gc12500350 Title Agriculture Description 10 Pack X Tnt 832 Ammonia 10 Pack X Tnt 830 10 Milligram/liter X Tnt 866 Chlorine Free Tnt 10 Pack X Tnt 835, Nitrate 1 Milligram/liter X Tnt845 Aa Phosphorus 1 Pack X 2125818 Aarr Cod Digestionvial 1 Pack X 2125915 Aa Hr Hw 1 Milligram/liter X Tnt 844 Aa Phosphorus Tnt Specification* Tnt 832 Ammmonia Tnt+, Hr (2-47mg/l)pk/25 Or Equivalent * Ammonia Tnt+, Ulr, .02-2.5ml/l Pk/25 Or Equivalent * Chlorine, Free Tnt+, (0.05-2.00mg/l) Or Equivalent * Nitrate, Tnt+ Uhr Pk/25(2-20mg/l) Or Equivalent * Aa Phosphorus Tnt+uhr Pk/25(2-20mg/l P04-p) Or Equivalent * Aa Rr Cod Digestion Vial,lr Hw Pk/150 * Aa Rr Cod Digestion Vial, Hw Pk/150 Or Equivalent * Phosphorus Tnt + Hr Pk/25(0.5-5mg/l P04-p) Or Equivalent Quotation Conditions Clause - 2.14.1 <(>&<)> 2.15 Provide, On Request By The Cct, Any Other Material That Has A Bearing On The Quotation Offer, The Supplier#s Commercial Position (including Joint Venture Agreements), Preferencing Arrangements, Or Samples Of Materials, Considered Necessary By The Cct For The Purpose Of The Evaluation Of The Quotation. If The Specifications Require The Supplier To Provide Samples/technical Data Sheets, These Shall Be Provided Strictly In Accordance With The Instructions Set Out In The Specification. If Such Samples /technical Data Sheets Are Not Submitted As Required In The Bid Documents Or Within Any Further Time Stipulated By The Cct In Writing, Then The Bid Concerned May Be Declared Non-responsive. · Wherever Reference Is Made To Any Particular Trade Mark, Name, Patent, Design, Type, Specific Origin Or Producer, Such Reference Shall Be Deemed To Be Accompanied By The Words "or Equivalent" · Nb The Municipal Bidding Document 6.1 (mbd 6.1) Is Attached, In Order To Be Eligible For Preference Points Bidders Are Required To Submit A Duly Completed, Current Dated Mbd 6.1 Document With Supporting Documents With Each And Every Rfq Submission, Failure To Submit Will Result In Zero Point Allocation. Nb!!! Please Provide Sample Pictures And Specifications With Your Submission. Delivery Date2025/06/30 Delivery Towater Services - Bulk Waste Water Maintenance Planning Plant Delivery Address31 Wale Street, Cape Town Contact Personshaheed Isaacs Telephone Number0214002979 Cell Number Closing Date2025/02/21 Closing Time04 00 Pm Rfq Submission Fax0000000000 Rfq Submission Fax 2 Buyer Email Addressgc1.quotations@capetown.gov.za Buyer Detailsa.february Buyer Phone0214006745 Attachments No Attachments Note This Commodity Has Gone On E-procurement Online Bidding. No Manual Submissions Will Be Accepted For This Commodities. Suppliers Will Need Must Log In To E-services Portal To Access Rfqs. Bids Must Be Compliant With The Preferential Procurement Regulations, 2017 Including But Not Limited To Local Content, Functionality, Price And Preference, Eligibility Criteria And Relevant Statutory Criteria. The Details Of This Are Contained In The Rfq Document And/or The Specification Advertised Via E-procurement. Only Locally Produced Goods Or Locally Manufactured Goods, Meeting The Stipulated Minimum Threshold For Local Production And Content, Will Be Considered, Where Applicable.

Details: Rfq Type Goods Goods Electrical Equipment & Components Reference Number Gh12500511 Title Pole Mounting Box Lv Uv Stable Pp Description 360 Each X Pole Mounting Box Lv Uv Stable Pp Specification* Pole Mounting Box - Voltage Low Voltage Material Uv Stable Polypropylene Size Oval Design Minimum Bottom Opening Dimensions 1 45mm Long Curve, 100mm Short Curve, 210mm Inside Height Specification Must Be Able To Accept Upto Three Single Pole Mcb's With Maximum Dimentions 26 X 110 X 75mm (depth), Or 1 X 3-pole Mcb Under 100a, 78 X 110 X 75mm (depth), Three External Operating Slides For Each Of The Single Pole Mcb's, Re-configrable To 1 Or 2 Depending On The Mcb Configuration, Operating Slides To Be Operated From Ground Level By Means Of A Hooked Linkstick, Cord Securing The Lid To The Base When Lid Is Removed For Maintenance / Installation, Base To To Include Din Rail Mounting For The Mcb's Mounting Mounting Bracket To Allow For Horizontal Or Vertical Mounting, Manufactured From Non-ferous Metal, With 2 X Self Tapping Screws To Secure Bracket To The Box Base, Guidline Wherever Reference Is Made To Any Particular Trade Mark, Name, Patent, Design, Type, Specific Origin Or Producer, Such Reference Shall Be Deemed To Be Accompanied By The Words "or Equivalent. ******************** Clause - 2.14.1 <(>&<)> 2.15 Provide, On Request By The Cct, Any Other Material That Has A Bearing On The Quotation Offer, The Supplier#s Commercial Position (including Joint Venture Agreements), Preferencing Arrangements, Or Samples Of Materials, Considered Necessary By The Cct For The Purpose Of The Evaluation Of The Quotation. If The Specifications Require The Supplier To Provide Samples/technical Data Sheets, These Shall Be Provided Strictly In Accordance With The Instructions Set Out In The Specification. If Such Samples /technical Data Sheets Are Not Submitted As Required In The Bid Documents Or Within Any Further Time Stipulated By The Cct In Writing, Then The Bid Concerned May Be Declared Non-responsive. ******************** Nb The Municipal Bidding Document 6.1 (mbd 6.1) Is Attached, In Order To Be Eligible For Preference Points Bidders Are Required To Submit A Duly Completed, Current Dated Mbd 6.1 Document With Supporting Documents With Each And Every Rfq Submission, Failure To Submit Will Result In Zero Point Allocation. Delivery Date2025/04/08 Delivery Toelectricity - Vanguard Red1 Plant/ Ph 637 1240 Delivery Address01 Klipfontein Road, Vanguard Contact Personsamkelo Lisa Telephone Number0214441380 Cell Number Closing Date2025/02/06 Closing Time12 00 Pm Rfq Submission Fax0000000000 Rfq Submission Fax 2 Buyer Email Addressmonja.davids@capetown.gov.za Buyer Detailsm.thorpe Buyer Phone0214006752 Attachments No Attachments Note On 3 April 2018 The City Of Cape Town Went Live With E-procurement Which Was Piloted With 3 Commodities Civil, Hardware, Electrical. No Manual Submissions Will Be Accepted For These Commodities And Suppliers Must Log In To E-services Portal To Access Rfqs. Bids Must Be Compliant With The Preferential Procurement Regulations, 2017 Including But Not Limited To Local Content, Functionality, Price And Preference, Eligibility Criteria And Relevant Statutory Criteria. The Details Of This Are Contained In The Rfq Document And/or The Specification Advertised Via E-procurement. Only Locally Produced Goods Or Locally Manufactured Goods, Meeting The Stipulated Minimum Threshold For Local Production And Content, Will Be Considered, Where Applicable.

Details: Rfq Type Goods Goods Beverages & Refreshments Reference Number Gf12500404 Title Beverages And Refreshment Description 400 Each X Apples 400 Each X Bananas 400 Each X Muffins - Assorted Vacuum Packed 400 Each X Energy Bar Choclate - Various Flavours 400 Each X Energy Drinks Various Flavours 5 Each X 5l Pure Juice Various Flavours 400 Each X Ziplock Bag For Refreshments Specification* Supply And Deliver Refreshments For Ward 40 Sports Tournament (snack Pack For Participants) Delivery Date 18.04.2024 Apples X 400 Delivery Address Fezeka Municipal Building Corner Of Lansdown Road And Ny 1 Gugulethu. Delivery Date 18.04.2025 Delivery Time 08h00 Contact Person Thabo Bidla Tel. No. 021 444 1589 / 076 843 2612 Email Thabo.bidlacapetown.gov.za Clause - 2.14.1 <(>&<)> 2.15 Provide, On Request By The Cct, Any Other Material That Has A Bearing On The Quotation Offer, The Supplier#s Commercial Position (including Joint Venture Agreements), Preferencing Arrangements, Or Samples Of Materials, Considered Necessary By The Cct For The Purpose Of The Evaluation Of The Quotation. If The Specifications Require The Supplier To Provide Samples/technical Data Sheets, These Shall Be Provided Strictly In Accordance With The Instructions Set Out In The Specification. If Such Samples /technical Data Sheets Are Not Submitted As Required In The Bid Documents Or Within Any Further Time Stipulated By The Cct In Writing, Then The Bid Concerned May Be Declared Non-responsive. #wherever Reference Is Made To Any Particular Trade Mark, Name, Patent, Design, Type, Specific Origin Or Producer, Such Reference Shall Be Deemed To Be Accompanied By The Words "or Equivalent" #nb The Municipal Bidding Document 6.1 (mbd 6.1) Is Attached, In Order To Be Eligible For Preference Points Bidders Are Required To Submit A Duly Completed, Current Dated Mbd 6.1 Document With Supporting Documents With Each And Every Rfq Submission, Failure To Submit Will Result In Zero Point Allocation. * Bananas X 400 * Muffins - Assorted Vacuum Packed X 400 * Energy Bar Choclate - Various Flavours X 400 * Energy Drinks Various Flavours X 400 * 5l Pure Juice Various Flavours * Ziplock Bag For Refreshments X 400 Delivery Date2025/04/18 Delivery Tocs - Amenities And Recreation Cses Delivery Address01 Fezeka Municipal Building Corner Landsown, Ny 1 Gugulethu Contact Personthabo Bidla Telephone Number0214441589 Cell Number0768432612 Closing Date2025/02/05 Closing Time12 00 Pm Rfq Submission Fax0000000000 Rfq Submission Fax 2 Buyer Email Addressgf1.quotations@capetown.gov.za Buyer Detailsf.shaik Buyer Phone0214006761 Attachments No Attachments Note The Procurement Of The Goods In This Category Is Only Available For Online Quoting. The City Of Cape Town Has Embarked On An Online Quoting System, Via E-procurement, On The E-services Platform. No Manual Submissions Will Be Accepted For These Commodities And Suppliers Must Log In To E-services Portal To Access Rfq Information And To Submit A Quote. Bids Must Be Compliant With The Preferential Procurement Regulations, 2017 Including But Not Limited To Local Content, Functionality, Price And Preference, Eligibility Criteria And Relevant Statutory Criteria. The Details Of This Are Contained In The Rfq Document And/or The Specification Advertised Via E-procurement. Only Locally Produced Goods Or Locally Manufactured Goods, Meeting The Stipulated Minimum Threshold For Local Production And Content, Will Be Considered, Where Applicable.

Details: Rfq Type Goods Goods Kitchen Appliances & Accessories Reference Number Gl12500498 Title Kitchen Appliances & Accessories Description 3 Each X Bar Fridge 92 Ml 1 Each X Microwave 40 L Specification* Po For 3 Bar Fridges 3 X 92l Bar Fridges Or Equivalent Specifications B Energy Efficiency Static Auto Defrost 93 Litre Total Net Volume Interior Light Antibacterial Door Seal Variable Thermostat Antibacterial Door Seal New Sleek Design Reversible Door Adjustable Leveling Feet Adjustable, Removable Shelves Sealed Crisper Icebox Flush-back Design Work Surface Top Cap Dimensions (h X W X D) 850 X 475 X 445 Mm Contact Person Nomgcobo Zizipho Manitshana - Thoko Sitshi-0214004380 Clause - 2.14.1 <(>&<)> 2.15 Provide, On Request By The Cct, Any Other Material That Has A Bearing On The Quotation Offer, The Supplier#s Commercial Position (including Joint Venture Agreements), Preferencing Arrangements, Or Samples Of Materials, Considered Necessary By The Cct For The Purpose Of The Evaluation Of The Quotation. If The Specifications Require The Supplier To Provide Samples/technical Data Sheets, These Shall Be Provided Strictly In Accordance With The Instructions Set Out In The Specification. If Such Samples /technical Data Sheets Are Not Submitted As Required In The Bid Documents Or Within Any Further Time Stipulated By The Cct In Writing, Then The Bid Concerned May Be Declared Non-responsive. # Wherever Reference Is Made To Any Particular Trade Mark, Name, Patent, Design, Type, Specific Origin Or Producer, Such Reference Shall Be Deemed To Be Accompanied By The Words "or Equivalent" # Nb The Municipal Bidding Document 6.1 (mbd 6.1) Is Attached, In Order To Be Eligible For Preference Points Bidders Are Required To Submit A Duly Completed, Current Dated Mbd 6.1 Document With Supporting Documents With Each And Every Rfq Submission, Failure To Submit Will Result In Zero Point Allocation. * Po For 1x Microwave 1 X Lg Electronics 40 Litre Model No Ms4042gm\00 Or Equivalent Required For New Office At Ism North Region General Specification Dimension (w*h*d) 556*320*426 Capacity - 40 Power Output 1000w Color Black / Silver Contact Person Thoko Sitshi 0214004380 Nomgcobo Zizipho Manitshana Delivery Date2025/02/28 Delivery Tosupport Services Informal Settlements Delivery Address12 Hertzog Boulevard, Cape Town Contact Personnomgcobo Zizipho Manitshana Telephone Number0214004380 Cell Number Closing Date2025/02/06 Closing Time04 00 Pm Rfq Submission Fax0000000000 Rfq Submission Fax 2 Buyer Email Addressgl1.quotations@capetown.gov.za Buyer Detailsc.williams Buyer Phone0214001789 Attachments No Attachments Note This Commodity Has Gone On E-procurement On 1 August 2018. No Manual Submissions Will Be Accepted For This Commodities. Suppliers Will Need Must Log In To E-services Portal To Access Rfqs. Bids Must Be Compliant With The Preferential Procurement Regulations, 2017 Including But Not Limited To Local Content, Functionality, Price And Preference, Eligibility Criteria And Relevant Statutory Criteria. The Details Of This Are Contained In The Rfq Document And/or The Specification Advertised Via E-procurement. Only Locally Produced Goods Or Locally Manufactured Goods, Meeting The Stipulated Minimum Threshold For Local Production And Content, Will Be Considered, Where Applicable.