Advertisement Tenders

Details: Description Republic Of The Philippines Province Of Zamboanga Del Norte Bids And Awards Committee Provincial Capitol, Estaka, Dipolog City Email Add: Bidsandawards22@gmail.com December 04, 2024 Invitation To Bid The Provincial Government Of Zamboanga Del Norte Through The Bids And Awards Committee (bac) Is Inviting Interested Parties/ Bidders To Bid For The Following Contract: Contract Id: Pr#300/200 - 24-12-485(o) Contract Name: Construction Of Nala Elementary School Outdoor Stage And Dressing Room (phase 1), Municipality Of Sibuco, Zamboanga Del Norte Location/purpose: For The Use In The Construction Of Nala Elementary School Outdoor Stage And Dressing Room (phase 1), Municipality Of Sibuco, Zamboanga Del Norte Approved Budget For The Contract (abc): P1,499,999.73 (inclusive Of All Applicable Taxes)  Bidders/ Contractors Must Have An Expertise In Undertaking A Similar Project, Completed At Least Two Similar Contracts Which The Equivalent Amount Is At Least 50% Of The Proposed Project For Bidding Within The Last Three Years.  Bidders Are Inform That The Delivery Term Is 75 Calendar Days Upon Receipt Of Notice To Proceed.  Bidders/ Contractors Shall Submit Their One (1) Copy Sealed Envelope Containing Their Technical And Financial Documents  Documents Submitted Must Be In Accordance With The Checklist Provided And Must Have A Corresponding Label Or Name Plates.  The Eligibility Check/ Screening As Well As The Preliminary Examination Of Bids Shall Use The Non- Discretionary "pass/ Fail" Criteria.  Post Qualification Of The Lowest/ Single Bids Shall Be Conducted.  All Particulars Relative To Eligibility Statement And Screening, Bid Security, Performance Security, Evaluation Of Bids, Post Qualification And Award Of The Contract Shall Be Governed By The Pertinent Provision Of Ra 9184 And Its Implementing Rules And Regulations (irr).  All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms In The Amount Stated In Itb Clause 14.  Bidding Is Restricted To Filipino Citizens/ Sole Proprietorships, Partnerships Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. The Schedules Of Activities Are Listed As Follows: Bac Activities Schedule Advertisement / Posting December 05 - 11, 2024 Pre-bid Conference December 12, 2024 @09:00am Availability And Issuance Of Bidding Documents December 05 - 27, 2024 @ 08:30am Deadline For The Submission Of Bids December 27, 2024 @ 08:30am Bid Opening And Evaluation December 27, 2024 @ 09:00am  Payment For Bidding Documents Is A Non- Refundable Amount Of Five Thousand Pesos Only (php5,000.00) Payable To The Office Of The Provincial Treasurer, Provincial Capitol Building, Dipolog City.  Prospective Bidders May Obtain Further Information From The Office Of The Bids And Awards Committee, Provincial Capitol Building During Office Hours @ 8:00am - 5:00pm.  Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Address Stated Above.  The Provincial Government Of Zamboanga Del Norte Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders.  Bidding Documents Will Be Electronically Uploaded To The Philgeps Website Of The Provincial Office Of Zamboanga Del Norte At Bidsandawards22@gmail.com. Atty. Rafael R. Osabel, Jr. Bac Chairman Annex: Construction Of Nala Elementary School Outdoor Stage And Dressing Room (phase 1), Municipality Of Sibuco, Zamboanga Del Norte Pr#300/200-24-12-485(o) Abc: P1,499,999.73 Item Activity Description Unit Qty Part A Other General Requirements A.1.4(1) Provision Of Progress Photograps Ea 63.00 A.1.1(3) Provision Of Field Office For The Engineers L.s 1.00 Part B General Requirements B.3 Permits And Clearances L.s 1.00 B.5 Project Billboard/signboard Ea 1.00 B7(2) Occupational Safety And Health Program L.s 1.00 B.9 Mobilization/demobilization L.s 1.00 Part C Civil, Structural, Architectural & Metal Works 803(1)a Structure Excavation (common Soil) M3 41.54 804(4) Gravel Bedding M3 11.43 804(1)b Embankment From Common Borrow M3 45.00 900(1)c2 Structural Concrete For Footing And Slab On Fill (class A, 28 Days) M3 12.45 900(1) Structural Concrete For Footing Tie Beam, Column, Suspended Slab, Girder/beam (class A, 28 Days) M3 9.57 902(1) Reinforcing Steel Of Reinforced Concrete Structures For One-storey, Grade 40/grade 60 Kg 1,644.96 903(2) Formworks And Falseworks (for One-storey Building) Sq.m 69.06 Part D Architectural / Finishing Works 1008 Aluminum Glass Window (sliding/casement/awning/fixed Type) M2 9.96 1010(1) Frames (jambs, Still, Head, Transoms And Mullions) Set 6.00 1010(2)b Wooden Panel Door M2 3.78 1043(1) Pvc Doors And Frames M2 2.52 1004(2) Finishing Hardware Set 4.00 1013(2) Fabricated Metal Roofing Accessory (ridge/hip Rolls/flashing/counter Flashing/valley Roll) M 7.40 1014 Prepainted Metal Sheets (rib Type, Long Span, Below .427 Thk/above .427 Thk) M2 136.90 1027(1) Cement Plaster M2 293.03 1046 100mm Chb Non-load Bearing/load Bearing (including Reinforcing Steel) M2 189.36 1047(2)b Structural Steel Roof Truss Kg 2,021.12 1047(2)c Structural Steel Purlins Kg 360.75 1047(3)b Metal Structure Accessories (sagrods) Pc 33.00 1047(3)c Metal Structure Accessories (turnbuckles) Pc 4.00 Part E Electrical Works 1100 Junction/utility/pull/square Box L.s 1.00 1100(30) Conduit Works, Boxes And Fittings L.s 1.00 1100(6)a 15mmø – 32mmø Polyvinyl Chloride (pvc) Pipes Length 32.00 1100(6)b 15mmø – 32mmø Polyvinyl Chloride (pvc) Pipes Length 5.00 1101 Switches Set 3.00 1101 Switches Set 3.00 1101 Duplex Convenience Outlet Set 10.00 1101(2) 1.60mm2 – 5.5mm2 Electric Wire (tw/thhn/twhn2) M 140.00 1101(2) 8.00mm2 – 22mm2 Electric Wire (tw/thhn/twhn2) M 30.00 1102 Panel Board With Main Breaker/branches, 3 Wires, 1 Neutral, 50amp – 200amp Set 1.00 1103(5) Downlight/pinlight Fixture With One-compact Fluorescent Lamp(cfl) Or Led Bulb, 1 Bulb Set 20.00 Part F Plumbing Works 1001(8) Sewer Line Works L.s 1.00 1002(4)a 65mmø-100mmø Polyvinyl Chloride (pvc) Pipe, Blue Pc 12.00 1001(1)a 50mmø-100mmø Pvc Pipe, Series 600/series 1000 M 9.00 1002(5) Water Closet/urinal With Complete Accessories Set 1.00 1002(5) Wall Hung Lavatory With Complete Accessories Set 1.00 1002(5) Faucet Pc 1.00 1002(5)h Floor Drain Plates Set 1.00 ***nothing Follows***

Details: Swindon Borough Council Invites Expressions Of Interest From Suitably Qualified And Experienced Service Providers For The Provision Of Refurbishment And Repairs To Vacant Properties (voids) From The Council's Housing Stock As Properties Are Vacated. Vacant Properties May Require Refurbishment, General Maintenance, Repair And Or Improvements To Return Them For Re-letting In Line With Swindon's Re-let Standard. The Works Can Range From Minor Repairs To Major Capital Works Requiring Full Property Renovation, Depending On The Age Of The Property And Condition Upon Return. The Estimated Number Of Properties Included In This Contract Will Be 390 To 480 Per Year, Divided Between Two Lots, With One Contractor Appointed To Each Lot. Lot Details Are Summarised Here, With Additional Details Provided In The Tender Documents: Lot 1: Provision Of The Services Described To Properties In North (excluding Stratton Area) And West Swindon (sn5 Postcode). Approximately 4,602 In-scope Properties Are Located In The Lot 1 Area, And The Council Estimates That Approximately 200 To 250 Properties Will Be Included In This Lot Per Annum. The Volume Is Expected To Increase Year On Year, As Described In The Procurement Documents. The Estimated Value Of Lot 1 Over Four Years Is £9,249,458, Based On Estimated Values Of £1.7m To £2.4m Per Year. Lot 2: Provision Of The Services Described To Properties In South Swindon And The Stratton Area. Approximately 4,195 In-scope Properties Are Located In The Lot 2 Area, And The Council Estimates That Approximately 187 To 230 Properties Will Be Included In This Lot Per Annum. The Volume Is Expected To Increase Year On Year, As Described In The Procurement Documents. The Estimated Value Of Lot 2 Over Four Years Is £8.537,961, Based On Estimated Values Of £1.6m To £2.2m Per Year. The Contract Form Will Be The Jct Measured Term Contract (2016). The Nhf Schedule Of Rates Will Be Used. The Initial Contract Term Will Be Three Years, With An Optional One Year Extension. Full Details Relating To The Requirements Are Provided In The Tender Documents. To Participate, Suppliers Will Need To Register As A Supplier With Procontract, Www.supplyingthesouthwest.org.uk, Then Register An Interest Before Obtaining Access To The Tender Documents. In The Event Of Difficulties Registering As A Supplier, Please Refer To The System Administrator Proactis Support Team Procontractsuppliers@proactis.com Tender Clarifications To Be Submitted In Writing Via Messaging In Procontract Tender Portal By Friday 20th December 2024, 1200 Hrs Uk Local Time. The Council’s Responses To These Clarification Questions Will Be Issued Periodically On The Procontract Tender Portal. Tender Responses Are Required To Be Submitted No Later Than Tuesday 7th January, 1200 Hrs Uk Local Time Via Procontract Tender Portal - Https://www.supplyingthesouthwest.org.uk/ Please Note That This Project Has Been Advertised On Find A Tender Service (fts) Contract Notice/contracts Finder/ Other Web Portals, However, Supplying The South West Portal, Http://www.supplyingthesouthwest.org.uk/ Is The Only Portal That Includes All The Relevant Documents Required To Respond To This Opportunity, Bearing Project Id: Dn753779. No Tender Submissions Will Be Considered Without Completing The Tender Documents In Full Including Attachments And Returning Them In Alignment With The Instructions Within The Tender Documents.

Details: Rfq Type Goods Goods Electrical Equipment & Components Reference Number Gh12500512 Title Insulator Strain Stay Mv/lv Porcelain Description 66 Each X Insulator Strain Stay Mv/lv Porcelain Specification* Insulator - Used For Strain Stay Mv/lv Type Porcelain Dimensions Length 140mm X Width 85mm Dry 60 Sec Power Frequency Withstand Level Greater Than 38kv Wet 60 Sec Power Frequency Withstand Level Greater Than 22kv Total Creapage Distance Greater Than 76mm Tensile Strength 96kn Reference Drawing Sk 5306 Sheet 1 Standard Nrs 022 Tested To Sans 60383-1 Guideline Wherever Reference Is Made To Any Particular Trade Mark, Name, Patent, Design, Type, Specific Origin Or Producer, Such Reference Shall Be Deemed To Be Accompanied By The Words "or Equivalent". ******************** Clause - 2.14.1 <(>&<)> 2.15 Provide, On Request By The Cct, Any Other Material That Has A Bearing On The Quotation Offer, The Supplier#s Commercial Position (including Joint Venture Agreements), Preferencing Arrangements, Or Samples Of Materials, Considered Necessary By The Cct For The Purpose Of The Evaluation Of The Quotation. If The Specifications Require The Supplier To Provide Samples/technical Data Sheets, These Shall Be Provided Strictly In Accordance With The Instructions Set Out In The Specification. If Such Samples /technical Data Sheets Are Not Submitted As Required In The Bid Documents Or Within Any Further Time Stipulated By The Cct In Writing, Then The Bid Concerned May Be Declared Non-responsive. ******************** Nb The Municipal Bidding Document 6.1 (mbd 6.1) Is Attached, In Order To Be Eligible For Preference Points Bidders Are Required To Submit A Duly Completed, Current Dated Mbd 6.1 Document With Supporting Documents With Each And Every Rfq Submission, Failure To Submit Will Result In Zero Point Allocation. Delivery Date2025/03/31 Delivery Toelectricity - Bloemhof Materials Store / Ph 444 1859 Delivery Address01 Bloemhof Road, Bellville Contact Personzane Willemse Telephone Number0214441859 Cell Number Closing Date2025/01/30 Closing Time12 00 Pm Rfq Submission Fax0000000000 Rfq Submission Fax 2 Buyer Email Addressmonja.davids@capetown.gov.za Buyer Detailsm.thorpe Buyer Phone0214006752 Attachments No Attachments Note On 3 April 2018 The City Of Cape Town Went Live With E-procurement Which Was Piloted With 3 Commodities Civil, Hardware, Electrical. No Manual Submissions Will Be Accepted For These Commodities And Suppliers Must Log In To E-services Portal To Access Rfqs. Bids Must Be Compliant With The Preferential Procurement Regulations, 2017 Including But Not Limited To Local Content, Functionality, Price And Preference, Eligibility Criteria And Relevant Statutory Criteria. The Details Of This Are Contained In The Rfq Document And/or The Specification Advertised Via E-procurement. Only Locally Produced Goods Or Locally Manufactured Goods, Meeting The Stipulated Minimum Threshold For Local Production And Content, Will Be Considered, Where Applicable.

Details: Rfq Type Goods Goods Beverages & Refreshments Reference Number Gf12500391 Title Beverages And Refreshment Description 160 Each X Energade 500ml 160 Each X Bananas 160 Each X Wine Gums Specification* Delivery Address Andrew Foster Street,bloubergstrand Hall Contact Nombongo Maseti 021.4443928 * Delivery Address Andrew Foster Street,bloubergstrand Hall Contact Nombongo Maseti 021.4443928 * Delivery Address Andrew Foster Street,bloubergstrand Hall Contact Nombongo Maseti 021.4443928 Clause - 2.14.1 <(>&<)> 2.15 Provide, On Request By The Cct, Any Other Material That Has A Bearing On The Quotation Offer, The Supplier#s Commercial Position (including Joint Venture Agreements), Preferencing Arrangements, Or Samples Of Materials, Considered Necessary By The Cct For The Purpose Of The Evaluation Of The Quotation. If The Specifications Require The Supplier To Provide Samples/technical Data Sheets, These Shall Be Provided Strictly In Accordance With The Instructions Set Out In The Specification. If Such Samples /technical Data Sheets Are Not Submitted As Required In The Bid Documents Or Within Any Further Time Stipulated By The Cct In Writing, Then The Bid Concerned May Be Declared Non-responsive. #wherever Reference Is Made To Any Particular Trade Mark, Name, Patent, Design, Type, Specific Origin Or Producer, Such Reference Shall Be Deemed To Be Accompanied By The Words "or Equivalent" #nb The Municipal Bidding Document 6.1 (mbd 6.1) Is Attached, In Order To Be Eligible For Preference Points Bidders Are Required To Submit A Duly Completed, Current Dated Mbd 6.1 Document With Supporting Documents With Each And Every Rfq Submission, Failure To Submit Will Result In Zero Point Allocation. Delivery Date2025/02/06 Delivery Tocs - Amenities And Recreation Cses Delivery Address02 Andrew Foster Street, Bloubergstrand Hall Contact Personnombongo Maseti Telephone Number0214443928 Cell Number Closing Date2025/01/29 Closing Time12 00 Pm Rfq Submission Fax0000000000 Rfq Submission Fax 2 Buyer Email Addressgf1.quotations@capetown.gov.za Buyer Detailsf.shaik Buyer Phone0214006761 Attachments No Attachments Note The Procurement Of The Goods In This Category Is Only Available For Online Quoting. The City Of Cape Town Has Embarked On An Online Quoting System, Via E-procurement, On The E-services Platform. No Manual Submissions Will Be Accepted For These Commodities And Suppliers Must Log In To E-services Portal To Access Rfq Information And To Submit A Quote. Bids Must Be Compliant With The Preferential Procurement Regulations, 2017 Including But Not Limited To Local Content, Functionality, Price And Preference, Eligibility Criteria And Relevant Statutory Criteria. The Details Of This Are Contained In The Rfq Document And/or The Specification Advertised Via E-procurement. Only Locally Produced Goods Or Locally Manufactured Goods, Meeting The Stipulated Minimum Threshold For Local Production And Content, Will Be Considered, Where Applicable.

Details: Rfq Type Goods Goods Stationery & Office Acc Reference Number Gf12500407 Title Pre-printed Stationery Description 300 Each X Form E-labs Dispatch Slip Wht A5 Specification* Form - Type E-labs Dispatch Slip Colour White Size A5 Unit Packaging 100 Sheets Per Pad Specifications Print Single Sided On A5 Paper With Cct Logo. As Per Cct Specifications, E-labs Dispatch Form Version September 2024. Artwork Tamara.dekeda@capetown.gov.za Supplier To Email Zachary.rudolph@capetown.gov.za For The Latest Artwork Prior To Delivery To Ensure Correct Version Is Being Printed And Supplied. Clause - 2.14.1 <(>&<)> 2.15 Provide, On Request By The Cct, Any Other Material That Has A Bearing On The Quotation Offer, The Supplier#s Commercial Position (including Joint Venture Agreements), Preferencing Arrangements, Or Samples Of Materials, Considered Necessary By The Cct For The Purpose Of The Evaluation Of The Quotation. If The Specifications Require The Supplier To Provide Samples/technical Data Sheets, These Shall Be Provided Strictly In Accordance With The Instructions Set Out In The Specification. If Such Samples /technical Data Sheets Are Not Submitted As Required In The Bid Documents Or Within Any Further Time Stipulated By The Cct In Writing, Then The Bid Concerned May Be Declared Non-responsive. #wherever Reference Is Made To Any Particular Trade Mark, Name, Patent, Design, Type, Specific Origin Or Producer, Such Reference Shall Be Deemed To Be Accompanied By The Words "or Equivalent" #nb The Municipal Bidding Document 6.1 (mbd 6.1) Is Attached, In Order To Be Eligible For Preference Points Bidders Are Required To Submit A Duly Completed, Current Dated Mbd 6.1 Document With Supporting Documents With Each And Every Rfq Submission, Failure To Submit Will Result In Zero Point Allocation. Delivery Date2025/02/12 Delivery Toelectricity - Brackenfell Materials Store/ Ph 444 9907 Delivery Address02 Kruisfontein Road, Brackenfell Contact Persongrant Klaasen Telephone Number0214449907 Cell Number Closing Date2025/02/05 Closing Time12 00 Pm Rfq Submission Fax0000000000 Rfq Submission Fax 2 Buyer Email Addressgf1.quotations@capetown.gov.za Buyer Detailsf.shaik Buyer Phone0214006761 Attachments No Attachments Note This Commodity Has Gone On E-procurement On 1 August 2018. No Manual Submissions Will Be Accepted For This Commodities. Suppliers Will Need Must Log In To E-services Portal To Access Rfqs. Bids Must Be Compliant With The Preferential Procurement Regulations, 2017 Including But Not Limited To Local Content, Functionality, Price And Preference, Eligibility Criteria And Relevant Statutory Criteria. The Details Of This Are Contained In The Rfq Document And/or The Specification Advertised Via E-procurement. Only Locally Produced Goods Or Locally Manufactured Goods, Meeting The Stipulated Minimum Threshold For Local Production And Content, Will Be Considered, Where Applicable.

Details: Rfq Type Goods Goods Stationery & Office Acc Reference Number Gf12500411 Title Pre-printed Station Description 216 Role X Label Shake The Bottle 75mm X 50mm White Specification* Label - Type Shake The Bottle Size 75mm X 50mm Colour White Packaging 1000 Labels Per Roll Specifications Black Printing On White Back Ground. As Per Cct Specifications - 1920gd_labelsticker_75mmwx50mmh_bottlelabel_artwork_crops (002) (200016158) Guideline Wherever Reference Is Made To Any Particular Trade Mark, Name, Patent, Design, Type, Specific Origin Or Producer, Such Reference Shall Be Deemed To Be Accompanied By The Words "or Equivalent". Clause - 2.14.1 <(>&<)> 2.15 Provide, On Request By The Cct, Any Other Material That Has A Bearing On The Quotation Offer, The Supplier#s Commercial Position (including Joint Venture Agreements), Preferencing Arrangements, Or Samples Of Materials, Considered Necessary By The Cct For The Purpose Of The Evaluation Of The Quotation. If The Specifications Require The Supplier To Provide Samples/technical Data Sheets, These Shall Be Provided Strictly In Accordance With The Instructions Set Out In The Specification. If Such Samples /technical Data Sheets Are Not Submitted As Required In The Bid Documents Or Within Any Further Time Stipulated By The Cct In Writing, Then The Bid Concerned May Be Declared Non-responsive. #wherever Reference Is Made To Any Particular Trade Mark, Name, Patent, Design, Type, Specific Origin Or Producer, Such Reference Shall Be Deemed To Be Accompanied By The Words "or Equivalent" #nb The Municipal Bidding Document 6.1 (mbd 6.1) Is Attached, In Order To Be Eligible For Preference Points Bidders Are Required To Submit A Duly Completed, Current Dated Mbd 6.1 Document With Supporting Documents With Each And Every Rfq Submission, Failure To Submit Will Result In Zero Point Allocation. Delivery Date2025/03/10 Delivery Tomedical - Ndabeni Store Materials Store / Ph 400 6123 Delivery Address01 Oude Molen Road, Ndabeni Contact Personnorman Baaitjies Telephone Number0214445886 Cell Number Closing Date2025/02/06 Closing Time12 00 Pm Rfq Submission Fax0000000000 Rfq Submission Fax 2 Buyer Email Addressgf1.quotations@capetown.gov.za Buyer Detailsf.shaik Buyer Phone0214006761 Attachments No Attachments Note This Commodity Has Gone On E-procurement On 1 August 2018. No Manual Submissions Will Be Accepted For This Commodities. Suppliers Will Need Must Log In To E-services Portal To Access Rfqs. Bids Must Be Compliant With The Preferential Procurement Regulations, 2017 Including But Not Limited To Local Content, Functionality, Price And Preference, Eligibility Criteria And Relevant Statutory Criteria. The Details Of This Are Contained In The Rfq Document And/or The Specification Advertised Via E-procurement. Only Locally Produced Goods Or Locally Manufactured Goods, Meeting The Stipulated Minimum Threshold For Local Production And Content, Will Be Considered, Where Applicable.

Details: Rfq Type Goods Goods Medical Equipment, Accessories & Supplie Reference Number Gn12500351 Title Medical Equipment, Accessories & Supplie Description 1 Set X Stablcal Primary Standards Set Of 3 1 Set X Stablcal Turbidity Standard Kit Of 5 Specification* Stablcal Primary Standards - Set Of 3 Without Frid Standards For The Calibrations Of: Tu500; Tu5300sc And Tu5400sc Laser Turbidimeters Set Consists Of: 1 X 10 Ntu 1 X 20 Ntu 1 X 600 Ntu Clause - 2.14.1 <(>&<)> 2.15 Provide, On Request By The Cct, Any Other Material That Has A Bearing On The Quotation Offer, The Supplier#s Commercial Position (including Joint Venture Agreements), Preferencing Arrangements, Or Samples Of Materials, Considered Necessary By The Cct For The Purpose Of The Evaluation Of The Quotation. If The Specifications Require The Supplier To Provide Samples/technical Data Sheets, These Shall Be Provided Strictly In Accordance With The Instructions Set Out In The Specification. If Such Samples /technical Data Sheets Are Not Submitted As Required In The Bid Documents Or Within Any Further Time Stipulated By The Cct In Writing, Then The Bid Concerned May Be Declared Non-responsive. # Wherever Reference Is Made To Any Particular Trade Mark, Name, Patent, Design, Type, Specific Origin Or Producer, Such Reference Shall Be Deemed To Be Accompanied By The Words "or Equivalent" # Nb: The Municipal Bidding Document 6.1 (mbd 6.1) Is Attached, In Order To Be Eligible For Preference Points Bidders Are Required To Submit A Duly Completed, Current Dated Mbd 6.1 Document With Supporting Documents With Each And Every Rfq Submission, Failure To Submit Will Result In Zero Point Allocation. * Stablcal Turbidity Standers Calibration Kit - 4000 Ntu(5 Standards) Kit For The Calibrations Of 2100n; 2100n Is; Tl2300 <(>&<)> Tl2310 Is Turbidity Meters Delivery Date2025/04/30 Delivery Towater Services - Faure Wtp Maintenance Plant Delivery Address0 Off Somerset Main Road, Firgrove Contact Personsandra Mortlock Telephone Number0214447043 Cell Number Closing Date2025/02/06 Closing Time04:00 Pm Rfq Submission Fax0000000000 Rfq Submission Fax 2 Buyer Email Addressgn1.quotations@capetown.gov.za Buyer Detailsn.mtati Buyer Phone0214006739 Attachments No Attachments Note This Commodity Has Gone On E-procurement Which Means That No Manual Submissions Will Be Accepted For This Commodity, Only Online Bids Will Be Accepted. Suppliers Will Need Must Log In To E-services Portal To Access Rfqs. Bids Must Be Compliant With The Preferential Procurement Regulations, 2017 Including But Not Limited To Local Content, Functionality, Price And Preference, Eligibility Criteria And Relevant Statutory Criteria. The Details Of This Are Contained In The Rfq Document And/or The Specification Advertised Via E-procurement. Only Locally Produced Goods Or Locally Manufactured Goods, Meeting The Stipulated Minimum Threshold For Local Production And Content, Will Be Considered, Where Applicable.

Details: Rfq Type Goods Goods Tools & Machinery Reference Number Gd12500544 Title Socket ½ 32mm Double Insulated Description 30 Each X Cable Cutter Plier H/h 60mm 200mm Length 10 Each X Socket ½ 32mm Double Insulated Specification* Quotation Conditions Clause - 2.14.1 <(>&<)> 2.15 Provide, On Request By The Cct, Any Other Material That Has A Bearing On The Quotation Offer, The Supplier#s Commercial Position (including Joint Venture Agreements), Preferencing Arrangements, Or Samples Of Materials, Considered Necessary By The Cct For The Purpose Of The Evaluation Of The Quotation. If The Specifications Require The Supplier To Provide Samples/technical Data Sheets, These Shall Be Provided Strictly In Accordance With The Instructions Set Out In The Specification. If Such Samples /technical Data Sheets Are Not Submitted As Required In The Bid Documents Or Within Any Further Time Stipulated By The Cct In Writing, Then The Bid Concerned May Be Declared Non-responsive. # Wherever Reference Is Made To Any Particular Trade Mark, Name, Patent, Design, Type, Specific Origin Or Producer, Such Reference Shall Be Deemed To Be Accompanied By The Words "or Equivalent" # Nb The Municipal Bidding Document 6.1 (mbd 6.1) Is Attached, In Order To Be Eligible For Preference Points Bidders Are Required To Submit A Duly Completed, Current Dated Mbd 6.1 Document With Supporting Documents With Each And Every Rfq Submission, Failure To Submit Will Result In Zero Point Allocation. Cable Cutter - Type Plier (hand Held) Cable Size 60mm Size 200mm In Length Specifications Heavy Duty, Pvc Grip, Cut Copper And Aluminium Cables Standards In Accordance To Sans 1120 And/or Sabs Approved Tolerance A Tolerance Of 10% Of The Specified Dimensions Will Be Accepted. * Socket - Size ½,32mm Type Double Insulated Specification 1000v Ac Standard Must Conform To Vde 0680/201,iec 900,bs En 60900. Delivery Date2025/03/18 Delivery Toelectricity - Ndabeni Red1 Plant / Ph 511 0410 Delivery Address0000 Melck Street, Ndabeni Contact Persona.filby Telephone Number0214009269 Cell Number Closing Date2025/02/06 Closing Time12 00 Pm Rfq Submission Fax0000000000 Rfq Submission Fax 2 Buyer Email Addressgd1.quotations@capetown.gov.za Buyer Detailsa.filby Buyer Phone0214009269 Attachments No Attachments Note This Commodity Has Gone Live For Only Quoting On The E-procurement Portal. No Manual Submissions Will Be Accepted For This Commodities. Suppliers Will Need Must Log In To E-services Portal To Access Rfqs. Bids Must Be Compliant With The Preferential Procurement Regulations, 2017 Including But Not Limited To Local Content, Functionality, Price And Preference, Eligibility Criteria And Relevant Statutory Criteria. The Details Of This Are Contained In The Rfq Document And/or The Specification Advertised Via E-procurement. Only Locally Produced Goods Or Locally Manufactured Goods, Meeting The Stipulated Minimum Threshold For Local Production And Content, Will Be Considered, Where Applicable.

Details: Rfq Type Goods Goods Kitchen Appliances & Accessories Reference Number Gl12500499 Title Kettle Cordless Glass Black 1.8l 2200w Description 5 Each X Kettle Cordless Glass Black 1.8l 2200w Specification* Quantity=5 Technical Specification Kettle Cordless Glass Black 1.8l 2200w Capacity 1,8 Litres Power Rating 2200w Material Glass Colour Black Special Feature Automatic Shut Off 202 Concealed Heating Element Boil Dry And Overheat Protection Clause - 2.14.1 <(>&<)> 2.15 Provide, On Request By The Cct, Any Other Material That Has A Bearing On The Quotation Offer, The Supplier#s Commercial Position (including Joint Venture Agreements), Preferencing Arrangements, Or Samples Of Materials, Considered Necessary By The Cct For The Purpose Of The Evaluation Of The Quotation. If The Specifications Require The Supplier To Provide Samples/technical Data Sheets, These Shall Be Provided Strictly In Accordance With The Instructions Set Out In The Specification. If Such Samples /technical Data Sheets Are Not Submitted As Required In The Bid Documents Or Within Any Further Time Stipulated By The Cct In Writing, Then The Bid Concerned May Be Declared Non-responsive. # Wherever Reference Is Made To Any Particular Trade Mark, Name, Patent, Design, Type, Specific Origin Or Producer, Such Reference Shall Be Deemed To Be Accompanied By The Words "or Equivalent" # Nb The Municipal Bidding Document 6.1 (mbd 6.1) Is Attached, In Order To Be Eligible For Preference Points Bidders Are Required To Submit A Duly Completed, Current Dated Mbd 6.1 Document With Supporting Documents With Each And Every Rfq Submission, Failure To Submit Will Result In Zero Point Allocation. Contact Person Saltiel Tabane Senior Superintendent Tel 021 444 1364 | Cell 084 508 0405 | Saltiel.tabane@capetown.gov.za Water <(>&<)> Waste Directorate | Water And Sanitation Department E<(>&<)>am Mechanical Waste Water | 1st Floor Eam Killarney Depot Koeberg Road | Milnerton Delivery Date2025/04/30 Delivery Towater Services - E&am Maintenance Plant Delivery Address0 Koeberg Road, Milnerton Contact Personsaltiel Tabane Telephone Number0214441364 Cell Number Closing Date2025/02/06 Closing Time04 00 Pm Rfq Submission Fax0000000000 Rfq Submission Fax 2 Buyer Email Addressgl1.quotations@capetown.gov.za Buyer Detailsc.williams Buyer Phone0214001789 Attachments No Attachments Note This Commodity Has Gone On E-procurement On 1 August 2018. No Manual Submissions Will Be Accepted For This Commodities. Suppliers Will Need Must Log In To E-services Portal To Access Rfqs. Bids Must Be Compliant With The Preferential Procurement Regulations, 2017 Including But Not Limited To Local Content, Functionality, Price And Preference, Eligibility Criteria And Relevant Statutory Criteria. The Details Of This Are Contained In The Rfq Document And/or The Specification Advertised Via E-procurement. Only Locally Produced Goods Or Locally Manufactured Goods, Meeting The Stipulated Minimum Threshold For Local Production And Content, Will Be Considered, Where Applicable.

Details: Rfq Type Goods Goods Tools & Machinery Reference Number Gd12500541 Title Earthing Kit For Hv Power Lines Description 4 Each X Earthing Kit For Hv Power Lines Specification* Quotation Conditions Clause - 2.14.1 <(>&<)> 2.15 Provide, On Request By The Cct, Any Other Material That Has A Bearing On The Quotation Offer, The Supplier#s Commercial Position (including Joint Venture Agreements), Preferencing Arrangements, Or Samples Of Materials, Considered Necessary By The Cct For The Purpose Of The Evaluation Of The Quotation. If The Specifications Require The Supplier To Provide Samples/technical Data Sheets, These Shall Be Provided Strictly In Accordance With The Instructions Set Out In The Specification. If Such Samples /technical Data Sheets Are Not Submitted As Required In The Bid Documents Or Within Any Further Time Stipulated By The Cct In Writing, Then The Bid Concerned May Be Declared Non-responsive. # Wherever Reference Is Made To Any Particular Trade Mark, Name, Patent, Design, Type, Specific Origin Or Producer, Such Reference Shall Be Deemed To Be Accompanied By The Words "or Equivalent" # Nb The Municipal Bidding Document 6.1 (mbd 6.1) Is Attached, In Order To Be Eligible For Preference Points Bidders Are Required To Submit A Duly Completed, Current Dated Mbd 6.1 Document With Supporting Documents With Each And Every Rfq Submission, Failure To Submit Will Result In Zero Point Allocation. Specs For Eathing Kit Consist Of 3 Aluminium Conductor Clamps 3 Flexible Copper Cables With Transparent Insulation, Cross Section 50mm Square Length 6m Or 8m (cross Section 95mm Square Other Length On Request) 3 Grounding Clamps For Steel Radius 33mm Insulating Fireglass Stick,decomposable, Length 4-6m Insulating Fibreglass Stick Model 77-4010 For Conduct Diameter 5bis 60mm Fibreglass Stick 3x1,5m Copper Cable 6m Dimensioned For Voltage Up To 150kv For More Information You Can Contact Gcobisa On 0214441853 Delivery Date2025/02/28 Delivery Toelectricity - Ndabeni Red1 Plant / Ph 511 0410 Delivery Address0000 Melck Street, Ndabeni Contact Persongcobisa Telephone Number0214441853 Cell Number Closing Date2025/02/07 Closing Time12 00 Pm Rfq Submission Fax0000000000 Rfq Submission Fax 2 Buyer Email Addressgd1.quotations@capetown.gov.za Buyer Detailsa.filby Buyer Phone0214009269 Attachments No Attachments Note This Commodity Has Gone Live For Only Quoting On The E-procurement Portal. No Manual Submissions Will Be Accepted For This Commodities. Suppliers Will Need Must Log In To E-services Portal To Access Rfqs. Bids Must Be Compliant With The Preferential Procurement Regulations, 2017 Including But Not Limited To Local Content, Functionality, Price And Preference, Eligibility Criteria And Relevant Statutory Criteria. The Details Of This Are Contained In The Rfq Document And/or The Specification Advertised Via E-procurement. Only Locally Produced Goods Or Locally Manufactured Goods, Meeting The Stipulated Minimum Threshold For Local Production And Content, Will Be Considered, Where Applicable.