Advertisement Tenders

Details: The London Borough Of Enfield (the ‘contracting Authority’) Is Seeking To Appoint Up To Five (5) Suitably Qualified Providers To Deliver Its Prevention And Early Intervention Services. The Aim Of The Prevention And Early Intervention Services Is To Support Enfield Residents To Access The Right Information And Support, At The Right Time. This Means That People Are Enabled To Live Independently For Longer, With Good Outcomes And Without The Need For More Intensive Support From Health Or Social Care. The Service Is Divided Into Five Lots With Each Lot Envisaged To Have A Separate Contract. The 5 Individual Lots Are As Follows: Lot 1: Supporting Unpaid Carers Lot 2: Supporting Independence Through Information & Advice Digital Inclusion & Assistive Technology Lot 3: Supporting Independence Through Advocacy & Inclusion Lot 4: Supporting Independence & Inclusion Through Early Intervention Lot 5: Home From Hospital, Supporting Recovery & Maintaining Independence The Proposed Contracts Are For An Initial Term Of 3 Years. The Contracting Authority, At Its Absolute Sole Discretion, May Exercise An Option To Extend The Contracts At The End Of The Initial Term For Two Further Period Or Periods Of Up To 3 Years Each, Up To 9 Years In Total Subject To Contract And Satisfactory Performance. The Services Advertised In This Notice Fall Under The Services Listed In Chapter 3 And Schedule 3 (social And Other Specific Services) Of The Public Contracts Regulations 2015. The Procurement Process That Will Apply To The Services Is Specified In The Procurement Documents Accordingly. The Procurement Is Being Run As A Two-stage Process With A Pre-selection Stage Using The Core Elements Of The Standard Selection Questionnaire, And Then A Second Stage, Where Shortlisted Candidates Will Be Invited To Tender. Therefore, Candidates Ranked Within The Top 5 (for The Lot They Are Applying For) For Total Scores In Technical And Professional Ability And Service Specific Questions Of The Ssq Will Be Shortlisted For The Second Stage Of The Process, I.e., Invitation To Tender. If Two Candidates Achieve The Same Score In The Scored Questions Of The Ssq, A Candidate That Scores High In Technical And Professional Ability Question Will Be Chosen Over The Other. If They Still Score The Same In The Technical And Professional Ability Question, Then A Candidate That Scores High In Both Technical And Professional Ability And One Of The Service Specific Questions (delivering Previous Services) Will Be Selected. So, The Contracting Authority Is Inviting Interested Organisations For Expression Of Interest Via Submission Of A Selection Questionnaire To Participate In This Procurement. Interested Organisations Must Submit The Selection Questionnaire And Relevant Financial Information Documents Via The Contracting Authority’s E-tendering Portal: London Tenders Portal Www.londontenders.org By The Return Deadline Which Is 12:00 Noon On 18 November 2024. Instructions For Completing The Selection Questionnaire (ssq Appendix 2) And The Ssq Evaluation Method (ssq Appendix 3) Are Uploaded On To The E-tendering Portal. Following The Completion Of The First Stage Supplier Selection/sq Process, The Contracting Authority Will Invite Pre-qualified Candidates To Submit Their Tender(s) Applicable To The Lot(s) That Have Been Applied For. Please Refer To The Procurement Documents Uploaded On To The Portal For Further Information.

Details: Description Invitation To Bid The Nueva Ecija University Of Science And Technology (neust) Through The Bids And Awards Committee (bac), Hereby Invites All Interested Entities Registered With The Philippine Government Electronic Procurement System (philgeps) To Bid For The Hereunder Project, Subject To The General Conditions Stated Herein. Name Of Project: Purchase Of Additional Ict, Software And Other Equipment And Machinery For College Of Architecture (re-bid) Location: Neust- Cabanatuan City Approved Budget For The Contract: Php4,215,000.00 Contract Duration: 60 Calendar Days Source Of Fund: Mds/gaa 2024 Cost Of Bidding Documents: Php5,000.00 Project Description: 1lot Item No. Unit Item Description Quantity 1 Pc Smart Interactive Board 65" ( 13th Gen Android -13 Os, 32g Flash Memory Size, 3,840 X 2,160 Resolution, 400 Nit, 8ms Response Time, 16/7, Ir Touch Technology, Ads Panel Type, 25% Glass Maze Ttf15-68fw 3yrs Warranty (brateck-ttf 15-68fw) Fit Screen Size 50"-86" Vesa Compatible) 4k Camera /ptz Camera /116° Viewing Angle Camera Resolution ( 4k30fps/1080p30fps/720p30fps) Hi-fi Speaker/ Aec Technology / Automatic Gain Control / Noise Reduction Built-in 4 Microphones / Voice Pickup Range Up To Radius 5 Meters /acoustic Echo Cancellation/automatic Noise Suppression 1yr Warranty 2 2 Pc Smart Full Hd Projector Full Hd Resolution Large Screen Projection Up To 391" 3000 Lumens Of Colour And White Brightness1 Comes With Android Tv™2 Dongle And Chromecast Built-in™ 5w Speaker (with Enclosure) 2 3 Set 2d And 3d Computer Aided Drafting Software Single Including 3yrs Maintenance (perpetual) 15 4 Set 3d Modeling And Rendering Software Single - 3 Years Subscription 15 5 Set Pro High Speed 3d Printer 600mm/s ~ Ds Maximum Speed20,000mm/s Maximum Acceleration Fully Supports High-speed Pla/petg. Internal Circulation + External Circulation (hepa+ Activated Carbon) Low Noise Mode 1 6 Unit A3 Printer With A3 Scanner Print Speed Of Up To 25.0 Ipm Prints Up To A3+ (for Pcs Simplex) Automatic Duplex Printing Ultrahigh Page Yield Of 7,500 Pages (black)and 6,000 Pages (colour) Vvi-fi, Vvi-fi Direct, Ethernet 2 7 Set 3d Lidar Building Scanner With Carrying Case, Tripod. Charging Kit, Phone Tablet, And 3 Years Professional Subscription Of 5 Users With 1 Year Warranty. With 2 Days Or 16 Hours Training For 5-10 Pax W/ Study Materials 1 8 Pc Gimbal Stabilizer 2nd-gen Native Vertical Shooting 4.5kg (10lbs) Payload Capacity With A 20% Increase In Motor Torque Supports Dual Focus & Zoom Motors Pc With Remote Control Lidar Focusing: 76,800 Ranging Points, 20-meter Subject Focusing Lidar & Transmission Interconnectivity Approx. 2.4x Battery Runtime, All-scenario Solutions 1 Item No. Unit Item Description Quantity 9 Pc Drone Intelligent Flight Battery Capacity: 5880 Mah Voltage: 44. 76 V Type: Li-ion Energy: 263.2 Wh Weight: Approx. 1.35 Kg 2 10 Pc Ultra-fast Charging Portable Power Station 2048wh Capacity With 220w Solar Panel 1 11 Pc 600x400mm 60w Laser Cutting And Engraving Machine With Rotary Jig 1 12 Unit All-in-one Desktop Intel Core I7 12th Gen Intel Iris Xe Graphics Eligible Shared Memory 16 Gb, Ddr4 Sdram 1 Tb Ssd Pcie Nvme M.2 Ssd 23.8inch Fhd (1920x 1080) Touch Windows 11 Home 64-bit 1 13 Unit Laptop M3 Chip 8-core Cpu 10-core Gpu 16-core Neural Engine 8gb Unified Memory 512gb Ssd Storage Footnote 15.3-inch Liquid Retina Display With True Tone" 1080p Facetime Hd Camera Magsafe 3 Charging Port Two Thunderbolt I Usb 4 Ports Support For Up To Two External Displays (with Laptop Lid Closed) Magic Keyboard With Touch Id Force Touch Trackpad 35w Dual Usb-c Port Compact Power Adapter 1 The Summary Of The Bidding Activities Is As Follows: Activities Schedule 1. Advertisement October 23-30, 2024 2. Issuance Of Bid Documents October 31-november 12, 2024 3. Pre-bid Conference October 31, 2024, 9:00am (via Zoom) 4. Deadline For Submission Of Bids (manual Submission) November 12, 2024, Until 5:00pm Bac Conference Room, Gen. Tinio (st.) Campus, Cabanatuan City 5. Opening Of Bids (face To Face) November 13, 2024, 9:00 Am Bac Conference Room, Gen. Tinio (st.) Campus, Cabanatuan City General Conditions: All Particulars To The Eligibility Statement And Screening, Bid Security, Performance Security, Pre-bidding Conference, Evaluation Of Bids, Post Qualification And Award Of Contract Shall Be Governed By The Pertinent Provisions Of R.a. 9184 And Its Implementing Rules And Regulations. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act”. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Business Organizations With At Least Sixty Percent (60%) Interest Or Ownership Of At Least 60% Of The Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Business Organizations Of A Country Where The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders From October 31-november 12, 2024 Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb. It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps) And The Website Of The Procuring Entity, Provided That Bidders Pay The Applicable Fee For The Bidding Documents Not Later Than The Deadline For Submission Of Bids. Bids Must Be Duly Received By The Bac Secretariat At The Address Below On Or Before November 12, 2024, Until 4:00pm. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In The Pbd. Late Bids Shall Not Be Accepted. On The Last Day For The Submission Of Bids And No Prospective Bidder/s Submitted Its Bid Documents Or Only One (1) Bid Was Submitted For The Above-mentioned Project, The Same Is Deemed Extended Until November 19, 2024, 5:00 Pm. This Is To Protect The Interest Of The University And Full Opportunity For A Competitive Bidding May Be Achieved. The University Likewise Reserves The Right To Cause Extension Or Postponement Of The Filing Of Bids Should Similar Situation Arises. Bid Opening Shall Be On November 13, 2024, 9:00 Am At The Bac Conference Room, Gen. Tinio (st.) Campus, Cabanatuan City Unless Extended. Bids Will Be Opened In The Presence Of The Bidder Or His/her/its Duly Authorized Representative/s. Failure To Attend During The Opening Of Bids Shall Be Considered A Waiver On The Part Of The Bidder Who Likewise Waives His/her/its Right To Raise Questions During The Bidding Procedures. The Nueva Ecija University Of Science And Technology Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. For More Information Concerning This Bidding, Please Contact The Following: Engr. Joel G. De Mesa Head, Bac Secretariat For Goods And Services Neust Gen. Tinio St., Cabanatuan City Email Address: Neust.bacsec@gmail.com Approved By: Dr. Honorato P. Panahon Bac Chairperson

Details: Description Invitation To Bid Purchase Of Sporting Goods To Be Used During The Conduct Of Provincial Meet On November 20-23, 2024 To Be Held In Naujan, Oriental Mindoro Ib No. Gsa 2024-11-072 1. The Provincial Government Of Oriental Mindoro, Through The General Fund Intends To Apply The Sum Of One Million Two Hundred Sixty One Thousand Seven Hundred Forty Pesos Only (php 1,261,740.00) Being The Abc To Payments Under The Contract For Purchase Of Sporting Goods To Be Used During The Conduct Of Provincial Meet On November 20-23, 2024 To Be Held In Naujan, Oriental Mindoro. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Provincial Government Of Oriental Mindoro – Procurement Division Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required Within Seven (7) Calendar Days Upon Signing Of The Notice To Proceed. Bidders Should Have Completed, Within Two (2) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). Item No. Item Description Qty./unit 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 Sports Materials 1. Archery 80 Cm Target Face Printed On String-reinforced Heavy Paper. Fita Specification 122 Cm Target Face Printed On String-reinforced Heavy Paper. Fita Specification Carbon Arrow (spine 700) Finger Tab Arm Guard Archery Sight Aluminum String (68 Inches) String (66 Inches) Bees Wax Brass String Nocking Point Archery Straw Target Butt Square (125 Cm By 125cm By 12cm) Limbs ( 34 Pounds) Limbs ( 36 Pounds) Chest Guard Straw Archery Straw Target Butt Square (125 Cm By 125cm By 12cm) 2. Athletics Upholstery Of Landing Foam 3. Badminton Shuttle Cocks 4. Baseball Rubber Bases (with Double Base) Continuation On Next Page Rubber Pitching Plate Rubber Home Plate Helmet With Face Guard Baseball Balls Catchers Mask With Helmet Body Protector Groin Protector (elementary) Groin Protector (secondary) 5. Basketball Gg6 Bg45006 Gg7 B64 Basketball Net Possession Arrow 6. Boxing 16oz Red Head Guards - Per Iaba Specs, Abap Approved 16oz Blue Head Guards Per Iaba Specs, Abap Approved 12oz Red Gloves Competition Gloves, Per Iaba Specs, Abap Approved 12oz Blue Gloves Competition Gloves, Per Iaba Specs, Abap Approved Red Groin Protector - Per Iaba Specs, Abap Approved Blue Groin Protector - Per Iaba Specs, Abap Approved Bandages Electronic Watches Gauze Bandage 7. Football Football Size 5 Football Size 4 8. Futsal Futsal Ball Size 4 Horn Buzzer With Switch 9. Sepak Takraw Sepak Rubberized Balls For Girls (red) - 170-180 Grams Istaf Standard Sepak Rubberized Balls For Boys (brown) - 170-180 Grams Istaf Standard Sepak Rubberized Balls For Junior (red) - 170-180 Grams Istaf Standard Score Indicator With Match Score Sepak Takraw’s Umpire’s Chairs 10. Softball Rubber Bases (with Double Base) Rubber Pitching Plate Rubber Home Plate Helmet With Face Guard Softball Balls Fingers Gloves Catchers Mask With Helmet Continuation On Next Page Body Protector Shin/knee Guard Marble Dust (apog) 11. Swimming Professional Stopwatch Starting Gun 12. Table Tennis Ball 40+ Mm (preferably White 3star) 13. Taekwondo Arm Guard Shin Guard Gloves Size 4 Gloves Size 5 Gloves Size 6 Groin Guard Sensing Socks (lpss) 3 Small 3 Medium 3 Large 3 Extra Large 14. Tennis Tennis Bails (24 X 3 Ball/can) Professional Stopwatch 15. Volleyball Volleyball Net Line Judge Flag Volleyball Antenna Manual Table Score Board With Match Score Volleyball Umpire’s Stands X-x-x 30 Pcs 20 Pcs 4 Dozen 4 Pcs 4 Pcs 4 Set 8 Pcs 8 Pcs 1 Tube 8 Pcs 2 Pcs 2 Pair 2 Pair 4 Pcs 5 Roll 2 Pcs 1 Pc 60 Tubes 2 Sets 2 Pcs 2 Pcs 8 Pcs 4 Boxes 2 Pcs 2 Pcs 2 Pcs 2 Pcs 4 Pcs 2 Pcs 3 Sets 3 Pcs 2 Pcs 2 Pcs 2 Pcs 2 Pcs 2 Pcs 2 Pcs 3 Set 2 Pcs 1 Set 4 Pcs 4 Pcs 2 Pcs 1 Pc 5 Pcs 5 Pcs 5 Pcs 4 Pcs 4 Pcs 2 Sets 2 Pcs 2 Pcs 8 Pcs 48 Pcs 22 Pcs 2 Pcs 2 Pcs 2 Pairs/sets 12 Sacks 6 Pcs 2 Set 20 Box 2 Prs 2 Pcs 2 Prs 2 Prs 2 Prs 1 Pc 3 Prs 3 Prs 3 Prs 3 Prs 3 Box 2 Pcs 4 Pcs 4 Pair 4 Pair 4 Pcs 3 Pcs 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. Activities Schedule Advertisement/posting Of Ib October 23, 2024  Bulletin Board Of The Pgom October 23, 2024  Pgom Website – Www.ormindoro.gov.ph October 23, 2024  Geps Website – Www.philgeps.net October 23, 2024 Issuance Of Bidding Documents October 23, 2024 To November 12, 2024 Pre-bid Conference October 30, 2024 At 10:00 Am Ppeso Conference Room Deadline Of Submission Of Bids November 12, 2024 At 9:30 Am At Procurement Division Opening Of Bids In Sealed Envelope November 12, 2024 At 10:00 Am At Ppeso Conference Room A) Eligibility Requirements And Technical Proposal November 12, 2024 At 10:00 Am At Ppeso Conference Room B) Financial Proposal November 12, 2024 At 10:00 Am At Ppeso Conference Room 4. Prospective Bidders May Obtain Further Information From Provincial Government Of Oriental Mindoro-procurement Division And Inspect The Bidding Documents At The Address Given Below During 8:00 Am To 5:00 Pm. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On October 23, 2024 To November 12, 2024 From The Given Address And Website(s) Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Five Thousand Pesos Only (php 5,000.00). The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person. 6. The Provincial Government Of Oriental Mindoro-procurement Division Will Hold A Pre-bid Conference On October 30, 2024 At 10:00 Am At Ppeso Conference Room, Provincial Capitol Complex, Camilmil Calapan City, Oriental Mindoro Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Procurement Division, On Or Before November 12, 2024 At 9:30 Am. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On November 12, 2024 At 10:00 Am At Ppeso Conference Room, Provincial Capitol Complex, Camilmil Calapan City Oriental Mindoro. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. The Pgom – Procurement Division Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11. For Further Information, Please Refer To: Marissa O. Acuzar Procurement Division – Goods And Services Provincial Capitol Complex Camilmil, Calapan City Oriental Mindoro 5200 Antonio M. Magnaye, Jr. Bac Chairperson

Details: Description Invitation To Bid General Merchandise For Use In Management Of Cvris Web Application And For Use In The Implementation Of Drrm Information, Education And Communication Campaign Ib No. Gsb 2024-10-055-a 1. The Provincial Government Of Oriental Mindoro, Through The Special Purpose Appropriation Intends To Apply The Sum Of Three Hundred Fifteen Thousand Four Hundred Fifty Pesos Only (php 315,450.00) Being The Abc To Payment Under The Contract For General Merchandise For Use In Management Of Cvris Web Application And For Use In The Implementation Of Drrm Information, Education And Communication Campaign. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Provincial Government Of Oriental Mindoro – Procurement Division For Goods & Services Now Invites Bids For The Above-mentioned Procurement Project. Delivery Of The Goods Is Required Within Seven (7) Calendar Days Upon Receipt Of Approved Notice To Proceed. Bidders Should Have Completed, Within Two (2) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). Item No. Item Description Qty./unit 1 2 3 4 5 Mini Handheld Video Camera Specifications: 1” Cmos Sensor 2” Rotatable Screen Smart Horizontal-vertical Shooting D-log M 10-bit 4k 120fps Full-pixel Fast Focus Active Track 6.0 3-microphone Array (stereo Recording) Spin Shot Supports High-definition Live-streaming Accessories: Type-c To Type-c Pd Cable Protective Cover Wrist Strap Handle With ¼” Thread Wide-angle Lens Mic Transmitter (shadow Black) Mic Windscreen Mic Clip Magnet Battery Handle Mini Tripod Carrying Bag 8k Waterproof 360 Action Camera Specifications: 4k Wide Angle Video Removable Lens Guard 135 Min Battery Life Ai Editing Stabilization Standard Lens Guard 114 Cm Invisible Selfie Stick Invisible Dive Case Floating Hand Grip Selfie Stick Wrist Strap Lens Cap 256 Gb Micro Sd Video Resolution 360” Mode: 8k: 7680x3840@30/25/24fps 5.7k+: 5760x2880@30/25/24fps 5.7k: 5760x2880@60/50/30/25/24fps 4k: 3840x1920@100/60/50/30/25/24fps Single Lens Mode: 4k: 3840x2160@60/50/30/25/24fps 2.7k: 2720x1536@60/50/30/25/24fps 1080p: 1920x1080@60/50/30/25/24fps Me Mode: 4k: 3840x2160@30/25/24fps 2.7k: 2720x1536@120/100/60/50fps 1080p: 1920x1080@120/100/60/50fps Photo Resolution: Approx. 72m (11904x5952) Approx. 18mp (5888x2944) Video Modes: Video, Active Hdr, Time Lapse, Time Shift, Bullet Time, Loop Recording Pre-recording Battery Capacity: 2290mah Charging Time: Charge To 80% In 38 Minutes (9v 2a) Charge To 100% In 55 Minutes (9v 2a) Operating Temperature: -4f To 104f (-20 To 40) Waterproof: 10m Sensor Size: % Aperture: F1.9; 35mm Equivalent Focal Length Video Format: Single-lens Mode: Mp4 360 Insv Photo Format: Insp (can Export Via Mobile App Or Studio Desktop Software) Dng Color Profiles: Standard, Vivid, Flat Video Coding: H.264, H.265 Max Video Bitrate: 200mbps Exposure Value: -4ev; Iso Range: 100-6400 Microsd Card Uhs-i V30 Speed Class, Exfat Format Sd Cards With Max Storage Of 1tb Are Recommended. Mics: 4 Bluetooth: Ble 5.2 Wi-fi: 2.4ghz, 5ghz 802.11a/b/g/n/ac Usb: Type-c Usb 3.0; Gyroscope: 6-axis Gyroscope; Color: Black All-in-one Printer Ink Tank Printer (print, Scan, Copy, Fax With Adf) Specifications: Print Speed Up To 17.0 Ipm Prints Up To A3+ (for Simplex) Automatic Duplex Printing Ultra-high Page Yield Of 7,500 Pages (black) And 6,000 Pages (colored) Wi-fi, Wi-fi Direct Flatbed, Scan And Copy Up To Legal All-in-one Printer Ink Tank Printer (print, Scan, Copy, Fax With Adf) Specifications: Print Speed Up To 17.0 Ipm Prints Up To A3+ (for Simplex) Automatic Duplex Printing Ultra-high Page Yield Of 7,500 Pages (black) And 6,000 Pages (colored) Wi-fi, Wi-fi Direct Flatbed, Scan And Copy Up To Legal Laptop Specifications: 15.6 Inches Intel Core I5 12th Generation Windows 11 Home 16gb Ddr 4gb Ram 512gb Nvme Pcle 5 Ssd Intel Iris Xe Accessories: W/ Laptop Bag, Wireless Mouse, Headphone X-x-x 2 Sets 1 Set 2 Units 1 Unit 1 Unit 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. A. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. Activities Schedule Advertisement/posting Of Ib October 31, 2024  Bulletin Board Of The Pgom October 31, 2024  Pgom Website-www.ormindoro.gov.ph October 31, 2024  Geps Website – Www.philgeps.net October 31, 2024 Issuance Of Bidding Documents October 31, 2024 To November 07, 2024 Deadline Of Submission Of Bids November 07, 2024 At 1:30pm At Bac Conference Room Opening Of Bids In Sealed Envelope November 07, 2024 At 2:00pm At Bac Conference Room A) Eligibility Requirements And Technical Proposal November 07, 2024 At 2:00pm At Bac Conference Room B) Financial Proposal November 07, 2024 At 2:00pm At Bac Conference Room 4. Prospective Bidders May Obtain Further Information From Provincial Government Of Oriental Mindoro - Procurement Division And Inspect The Bidding Documents At The Address Given Below During 8:00 Am To 5:00 Pm. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On October 31, 2024 To November 07, 2024 From The Given Address And Website(s) Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Five Hundred Pesos Only (php 500.00). The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person. 6. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Procurement Division, On Or Before November 07, 2024 At 1:30 Pm. Late Bids Shall Not Be Accepted. 7. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 8. Bid Opening Shall Be On November 07, 2024 At 2:00 Pm At Bac Conference Room, Provincial Capitol Complex, Camilmil Calapan City Oriental Mindoro. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 9. The Pgom – Procurement Division Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 10. For Further Information, Please Refer To: Niño John D. Hernandez Administrative Officer Ii Pgo-procurement Division Provincial Capitol Complex Camilmil, Calapan City Oriental Mindoro, 5200 09474066849 October 31, 2024 [date Of Issue] May Anne Joy M. Ylagan Bac Chairperson For Goods & Services

Details: Description Republic Of The Philippines Province Of Zamboanga Del Norte Bids And Awards Committee Provincial Capitol, Estaka, Dipolog City Email Add: Bidsandawards22@gmail.com September 27, 2024 Invitation To Bid The Provincial Government Of Zamboanga Del Norte Through The Bids And Awards Committee (bac) Is Inviting Interested Parties/ Bidders To Bid For The Following Contract: Contract Id: Pr#300(01)24-09-374(o) Contract Name: Repair/improvement Of 1 Unit 1 Classroom School Building At Pian Elementary School, Barangay Pian, Municipality Of Polanco, Zamboanga Del Norte Location/purpose: For The Use In The Repair/improvement Of 1 Unit 1 Classroom School Building At Pian Elementary School, Barangay Pian, Municipality Of Polanco, Zamboanga Del Norte Approved Budget For The Contract (abc): P1,700,000.00 (inclusive Of All Applicable Taxes) Bidders/ Contractors Must Have An Expertise In Undertaking A Similar Project, Completed At Least Two Similar Contracts Which The Equivalent Amount Is At Least 50% Of The Proposed Project For Bidding Within The Last Three Years. Required Number Of Days To Complete The Project Is 136 Calendar Days Upon Receipt Of Notice To Proceed. Bidders/ Contractors Shall Submit Their One (1) Copy Sealed Envelope Containing Their Technical And Financial Documents Documents Submitted Must Be In Accordance With The Checklist Provided And Must Have A Corresponding Label Or Name Plates. The Eligibility Check/ Screening As Well As The Preliminary Examination Of Bids Shall Use The Non- Discretionary "pass/ Fail" Criteria. Post Qualification Of The Lowest/ Single Bids Shall Be Conducted. All Particulars Relative To Eligibility Statement And Screening, Bid Security, Performance Security, Evaluation Of Bids, Post Qualification And Award Of The Contract Shall Be Governed By The Pertinent Provision Of Ra 9184 And Its Implementing Rules And Regulations (irr). All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms In The Amount Stated In Itb Clause 14. Bidding Is Restricted To Filipino Citizens/ Sole Proprietorships, Partnerships Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. The Schedules Of Activities Are Listed As Follows: Bac Activities Schedule Advertisement / Posting September 28, 2024 – October 04, 2024 Pre-bid Conference October 07, 2024 @09:00am Availability And Issuance Of Bidding Documents September 28, 2024 – October 21, 2024 @ 08:30am Deadline For The Submission Of Bids October 21, 2024 @ 08:30am Bid Opening And Evaluation October 21, 2024 @ 09:00am Payment For Bidding Documents Is A Non- Refundable Amount Of Five Thousand Pesos Only (php5,000.00) Payable To The Office Of The Provincial Treasurer, Provincial Capitol Building, Dipolog City. Prospective Bidders May Obtain Further Information From The Office Of The Bids And Awards Committee, Provincial Capitol Building During Office Hours @ 8:00am - 5:00pm. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Address Stated Above. The Provincial Government Of Zamboanga Del Norte Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. Bidding Documents Will Be Electronically Uploaded To The Philgeps Website Of The Provincial Office Of Zamboanga Del Norte At Bidsandawards22@gmail.com. Atty. Rafael R. Osabel, Jr. Bac Chairman Annex: Repair/ Improvement Of 1 Unit 1 Classroom School Building At Pian Elementary School, Barangay Pian, Municipality Of Polanco, Zamboanga Del Norte Pr# 300(01)24-09-374(o) Abc: P1,700,000.00 Item Activity Description Unit Qty Part A Other General Requirements A.1.1(3) Provision Of Field Office For The Engineers (bunkhouse) L.s 5.00 A.1.4(1) Provision Of Progress Photographs Ea 116 Part B General Requirements B.3 Permits And Clearances L.s 1.00 B.5 Project Billboard / Signboard Ea 1.00 B7(2) Occupational Safety And Health Program Ea 1.00 B.9 Mobilization/demobilization L.s 1.00 Part C Civil Works 801(1) Removal Of Structures And Obstruction L.s 1.00 803(1)a Structure Excavation (common Soil) Cu.m 24.71 804(4) Gravel Bedding Cu.m 8.85 804(1)b Embankment From Common Borrow By Equipment Cu.m 16.65 900(1)c2 Structural Concrete For Footing And Slab On Fill (class A, 28 Days) Cu.m 9.64 900(1) Structural Concrete For Column, Girder/beam (class A, 28 Days) Cu.m 3.63 902(1) Reinforcing Steel Of Reinforced Concrete Structures For One-storey, Grade 40 Cu.m 948.96 903(2) Formworks And Falseworks (for One-storey Building) Sq.m 179.91 Part D Plumbing Works 1001(1)a 50 Mm ∅ - 100 Mm ∅ Pvc Pipe, Series 1000 M 12.00 1001(1)a 50 Mm ∅ - 100 Mm ∅ Pvc Pipe, Series 1000 M 12.00 1002(4)a 13 Mm ∅ - 50 Mm ∅ Polyvinyl Chloride (pvc) Pipe, Blue Pc 74.00 1002(5) Water Closet/ Urinal With Complete Accessories Set 1.00 1002(5) Wall Hung/countertop/under Counter Lavatory With Complete Accessories Set 1.00 1002(5) Floor Drain Plates Set 1.00 1002(5)h Soap Holder (toilet Soap / Liquid Soap) Pc 1.00 1002(5) Toilet Tissue Holder/ Dispenser Pc 1.00 1002(5) Faucet Pc 1.00 Part E Steel Works 1047(2)c Structural Steel Purlins Kg 586.31 1047(2)b Metal Structure Accessories (sagrods) Pc 26.00 1047(3)c Metal Structure Accessories (turnbuckle) Pc 8.00 1047(3)c Metal Structure Accessories (crossbracing) Pc 4.00 1014 Prepainted Metal Sheets (rib Type, Long Span, Below 0.427thk) Sq.m 104.79 1013(2) Fabricated Metal Roofing Accessory (ridge Roll) M 9.60 1013(2)b Fabricated Metal Roofing (flashing – 0.60mm) M 19.20 1002(2)a 13 Mm ∅ - 50 Mm ∅ Galvanized Iron Pipe Pc 2.00 Part F Architectural Works 1003(1) 6mm Ordinary Plywood On Metal Frame Ceiling Sq.m 50.25 1003(1) 4.5mm Fiber Cement Board On Metal Frame Ceiling Sq.m 37.37 1046 100 Mm Chb Non Load Bearing (including Reinforcing Steel) Sq.m 91.58 1027(1) Cement Plaster Finish Sq.m 170.85 1018(1) Glazed Tiles And Trims Sq.m 8.10 1018 Unglazed Tiles Sq.m 2.25 1009(1)a Jalousie Window (glass) Sq.m 9.48 1005 Grille Window Sq.m 9.48 1010(1) Frames (jambs) Set 1.00 1010(2)b Wooden Panel Door Sq.m 3.78 1043(1) Pvc Doors And Frames (set) Sq.m 1.26 1032(1)a Painting Works (masonry Painting) Sq.m 156.58 1032(1)b Painting Works (wood Painting) Sq.m 95.18 1032(1)c Painting Works (metal Painting) Sq.m 417.46 1004(2) Finishing Hardware Set 2.00 Part G Electrical Works 1100(6) 15mm∅ – 32mm∅ Polyvinyl Chloride (pvc) Pipes Length 30.00 1100 Junction/ Utility/ Square Box Pc 16.00 1100(30) Conduit Works, Boxes And Fittings L.s 1.00 1101(2) 1.6mm2 – 5.5 Mm2 Electric Wire (tw/thhn/twhn2) M 300.00 1101(2) 8.00mm2 – 22 Mm2 Electric Wire (tw/thhn/twhn2) M 30.00 1101 Switches Set 1.00 1101 Duplex Convenience Outlet Set 3.00 1103(1) Lighting Fixtures L.s 1.00 1102 Panel Board With Main Breaker / Branches, 3 Wires, 1 Neutral, 50 Amp – 200 Amp Set 1.00 ***nothing Follows***

Details: Requirement: The Agriculture And Agri-food Canada, Lethbridge Research Centre In Lethbridge, Ab Requires An Upgrade To The Site’s Greenhouse Controls. Argus Controls Are Required In Order To Maintain Compatibility With The Existing System. Argus Controls Is The Original Equipment Manufacturer Of Argus Controllers And Thus A Sole Source Contract Is Required. Scope Of Work: The Work Will Include All Parts And Labour To Upgrade Greenhouse Range F To The Newest Argus Controllers As Follows: • Replacement Of Hardware: Swap Obsolete Argus Classic Components For New Argus Titan Components In Two Zones (f Range). • Software Upgrade: Transition The Control Software To The Titan Platform For Enhanced Plant Environment Management. • Reuse Of Existing Components: Existing Sensors, Line Voltage Relays, Breakers, Etc., Will Be Used To Repair Malfunctioning Controllers (range C/d). • Installation Of Additional Sensors: Integrate New Sensors With The Existing Weather Mast. • Communication Setup: Ensure Seamless Communication Between Old And New Controllers And The Central Greenhouse Computer. • Training: Provide Comprehensive Training For Greenhouse Staff On The New Software And Controllers. • Includes As-built Drawings And Installation Manuals. • Includes Warranty Coverage On New Hardware And Software Components From Defective Material And Workmanship For A Period Of One Year. Contract Period: From Date Of Award And Shall Be Completed Prior To March 31, 2025. Contract Value: Estimated Value: $109,446.75 (including Gst). Pre-identified Contractor: Argus Controls 19900 84 Avenue Langley, Bc V2y 3c2 Sole Source Justification: Argus Controls Is The Original Equipment Manufacturer And Have Developed And Own All Related Ip. They Hold Exclusive Ownership Of The Intellectual Property For Their Equipment And Do Not Authorize Any Value-added Resellers Or Distributors For Their Equipment. Acan Notice: You Are Hereby Notified That The Government Intends To Negotiate With One Firm Only As Identified Above. Should You Have Any Questions Concerning This Requirement, Contact The Contracting Authority. An Advance Contract Award Notice (acan) Allows Departments And Agencies To Post A Notice, For No Less Than Fifteen (15) Calendar Days, Indicating To The Supplier Community That It Intends To Award A Good, Service Or Construction Contract To A Pre-identified Contractor. If No Other Supplier Submits, On Or Before The Closing Date, A "statement Of Capabilities" That Meets The Requirements Set Out In The Acan, The Contracting Authority May Then Proceed With The Award. However, Should A Statement Of Capabilities Be Found To Meet The Requirements Set Out In The Acan, Then The Contracting Authority Will Proceed To A Full Tendering Process. Submission Of Statement Of Capabilities: Suppliers Who Consider Themselves Fully Qualified And Available To Provide The Services/goods Described Herein, May Submit A Statement Of Capabilities In Writing, Either Via Letter, Facsimile Or Email To The Contact Person Identified In This Notice On Or Before The Closing Date Of This Notice. The Statement Of Capabilities Must Clearly Demonstrate How The Supplier Meets The Advertised Requirements. The Solicitation Number, Name Of Contracting Authority And Closing Date Of The Acan Must Appear Within Your Statement Of Capabilities In Block Letters. The Crown Retains The Right To Negotiate With Suppliers On Any Procurement. Contracting Authority: Melissa Smith, Contracting Specialist Agriculture And Agri-food Canada Western Service Centre 300 – 2010 12th Avenue Regina, Sk S4p 0m3 Phone: 306-515-4796; Fax: 306-780-5018 Email: Melissa.smith3@agr.gc.ca

Details: Rfq Type Goods Goods Civil, Road, Sewer, Plumbing & Eng Suppl Reference Number Ge12500306 Title Civil , Road, Sewer , Plumbing & Eng Sup Description 100 Each X Kerb Concrete Inlet Bk4 150mm 300mm 1m Specification* Kerb - Material Concrete Type Inlet Size 150mmx300mmx1m Specification Bk4 Standard To Comply With Sabs 927 Guideline Wher Ever Reference Is Made To Any Particular Trade Mark, Name, Patent, Design, Type, Specific Origin Or Producer, Such Reference Shall Be Deemed To Be Accompanied By The Words "or Equivalent". Nb!!! Please Ensure That You Attach The Technical Data Sheets And Pictures Of The Item Quoted On, To Your Rfq Submission****failure To Adhere To This Requirement, May Result In Your Offer Being Non-responsive**** Allocation Of Preference Points *nb The Municipal Bidding Document 6.1 (mbd 6.1) Has Been Amended, In Order To Be Eligible For Preference Points Bidders Are Required To Submit A Duly Completed Mbd 6.1 Document With Supporting Documents With Each And Every Rfq Submission. In Order To Qualify For Preference Points, It Is The Responsibility Of The Bidder To Submit A Duly Completed Mbd 6.1 Form (bidders Must Indicate How They Claim Points For Each Specific Goal). Submit Documentary Proof Of Updated Bbbee Certificate/sworn Affidavit And/or Cipc Certificate With Each Rfq Submission To Validate Specific Goals. (if A Bidder Is Registered And Active On The City#s Supplier Database And Has Submitted The Bbbee Certificate/ Sworn Affidavit/ Cipc Certificate, The Submission Of Said Documents Is Not Necessary). It Is Therefore Incumbent On Suppliers To Ensure That Documents Are Kept Updated. Failure To Comply With The Above Will Result In A Zero (0) Allocation For Preference Points. *** Please Ensure That All Required Insurances Such As Your Public Liability, Employers Liability Or Coida And Motor Vehicle Insurance Are Attached And That They Are Up-to-date. If You Utilise Couriers And Do Not Have Motor Vehicle Insurance, Then Please Mention This. Also Ensure That Your Updated Declaration Of Interest And Bbbee Is Attached At All Times*** Delivery Date2024/12/02 Delivery Tologistics - Killarney Store Materials Store / Ph 550 7784 Delivery Address00 Koeberg Road, Milnerton Contact Personpeter Vlok Telephone Number0214004485 Cell Number Closing Date2024/11/04 Closing Time04 00 Pm Rfq Submission Fax0000000000 Rfq Submission Fax 2 Buyer Email Addressge1.quotations@capetown.gov.za Buyer Detailsj.esterhuize3 Buyer Phone0214003413 Attachments No Attachments Note This Commodity Has Gone On E-procurement On 1 August 2018. No Manual Submissions Will Be Accepted For This Commodities. Suppliers Will Need Must Log In To E-services Portal To Access Rfqs. Bids Must Be Compliant With The Preferential Procurement Regulations, 2017 Including But Not Limited To Local Content, Functionality, Price And Preference, Eligibility Criteria And Relevant Statutory Criteria. The Details Of This Are Contained In The Rfq Document And/or The Specification Advertised Via E-procurement. Only Locally Produced Goods Or Locally Manufactured Goods, Meeting The Stipulated Minimum Threshold For Local Production And Content, Will Be Considered, Where Applicable.

Details: Addendum No. 1 Add To Move Bid Opening Date To 11-07-24 Notice To Bidders Electronic Or Sealed Bids Will Be Received By The City Of Baton Rouge And Parish Of East Baton Rouge, Purchasing Division, City Hall Building, Room 826, 222 Saint Louis Street, 8th Floor, Baton Rouge, La. Until 11:00 A.m. November 8, 2024, For The Following: A24-91039-3 Emergency Call-outs For Bio-hazardous Cleaning And Disposal A Mandatory Pre-bid Conference And A Mandatory Job Site Shall Be Held On October 29, 2024 At 9:00 A.m., At The City Of Baton Rouge Police Headquarters Lobby, 9000 Airline Highway, Baton Rouge, La 70815. Only Vendors Participating In The Mandatory Pre-bid Conference And Mandatory Job Site Visit Will Be Eligible For Award. Official Bid Documents Are Available At Central Bidding (https://www.centralauctionhouse.com/rfpc10656-city-of-baton-rouge.html) Or By Request From The City Of Baton Rouge At Dsstewart@brla.gov. Bids Shall Be Submitted Electronically Via Www.centralbidding.com Or On The Solicitation Bid Forms Furnished By The City Of Baton Rouge And Parish Of East Baton Rouge Prior To The Bidding Deadline. Electronic Bids For The Solicitation Will Be Downloaded By The City Of Baton Rouge And Parish Of East Baton Rouge, Purchasing Division. Beginning As Soon As Feasible After The Bid Closing Time All Electronic Bids Will Be Downloaded And Publicly Read Aloud Along With All Paper Bids Received, If Any, In Room 806 Immediately After The 11:00 A.m. Bid Closing. Bidders Or Their Authorized Representatives Are Invited To Be Present. Note: The City-parish Has Elected To Use Lapac, The State's Online Electronic Bid Posting And Notification System, In Addition To Its Standard Means Of Advertising This Requirement. This Invitation To Bid Is Available In Electronic Form At The Lapac Website Https://wwwcfprd.doa.louisiana.gov/osp/lapac/dspbid.cfm?search=department&term=102. Bids, Amendments To Bids Or Request For Withdrawal Of Bids Received After Time Specified For Bid Openings Shall Not Be Considered For Any Cause Whatsoever. Inquiries Will Be Received Up Until 5 Pm On November 1, 2024. Full Information May Be Obtained Upon Request From The Above Address Or By Telephoning Dexter Stewart At (225) 389-3259, Ext. 3264, Or Via Email Dsstewart@brla.gov. Any Vendor Who Would Like To Listen To The Opening Of This Bid Can Access The Following Link, At The Date And Time Of This Bid Opening: Join By Phone +1-408-418-9388 United States Toll Access Code: 263 373 080 (followed By The # Button) Alternate Numbers To Call If Number Above Is Not Available, Which May Occur Due To Network Traffic (use The Same Access Code, Followed By The # Button): United States Toll (boston) +1-617-315-0704 United States Toll (chicago) +1-312-535-8110 United States Toll (dallas) +1-469-210-7159 United States Toll (denver) +1-720-650-7664 United States Toll (jacksonville) +1-904-900-2303 United States Toll (los Angeles) +1-213-306-3065 These Numbers Will Provide You With Live Audio Access To This Bid Opening.

Details: The Department For Infrastructure And Transport (the Department) Utilises A Prequalification System To Ensure That Only Appropriately Skilled And Experienced Companies Are Permitted To Submit Tenders To The Department In Certain Categories Of Contract Associated With The Delivery Of Social Infrastructure By The Building Projects Directorate. Companies Wishing To Respond To Building Project Listed Tenders Must First Be Prequalified With The Department For Infrastructure And Transport. A Limited Number Of Appropriately Prequalified Companies Will Be Invited To Participate In Procurements For Projects Valued At Under $50 Million. A Selection Committee Is Responsible For Selecting Tender Fields For Professional Services Contractors (psc's) And General Building Contractors (gbc's) Appropriate To The Value And Complexity Of The Project. The Tender Fields Will Typically Consist Of 3-5 Tenderers. Expressions Of Interest May Be Called For Services Required To Deliver Projects Valued At Over $50 Million And Only Submissions From Appropriately Prequalified Companies Will Be Considered. Where A Category Does Not Exist, The Department May Use Other Methods To Ensure That Tenderers Are Appropriately Qualified To Perform The Services Required. A Company May Apply For Prequalification In Any Category At Any Time. Prequalification Is Available At Various Levels That Reflect The Complexity And Value Of Contracts That A Company Will Be Permitted To Tender For. When A Tender Is Advertised, The Request For Tender Will Specify The Level Of Prequalification Required. Prequalification For Building Projects Contractors Is Open To All Applicants Of The Following Categories: 1. General Builders 2. Cost Managers 3. Professional Services Contractors (psc): Lead Psc: * Architecture * Engineering Discipline Psc: * Vertical Transportation Engineer * Structural Engineer * Mechanical Engineer * Landscape Architect * Interior Designer * Hydraulic Engineer * Heritage Architect * Fire Engineer * Electronic Engineering * Electrical Engineer * Civil Engineer * Architect 4. Asbestos Management Services Site Inspectors Air Monitoring And Compliance 5. Trade/ Subcontractors Air Conditioning And Mechanical Electrical Plumbing Fire Protection Demolition And Asbestos Removal More Information On The Specific Requirements Of Each Category And Application Forms Can Be Downloaded At: Https://dit.sa.gov.au/contractor_documents/prequalification Key Prequalification Information Prequalification Is For A Notional 3 Year Period. However, If A Company, In The View Of The Department, Is Considered To Have Performed Below Industry Standard, Undergoes A Restructure Or Its Competency Is Materially Reduced, Dit May Request A New Application. At Any Time, Dit May Seek Confirmation That The Information Submitted With An Application Remains Relevant Or Request An Update Of The Information. Dit Will Monitor And Assess The Ongoing Performance Of Each Prequalified Company. A Company’s Ongoing Prequalification Is Subject To It Maintaining A Satisfactory Level Of Performance In Its Delivery Of Contracts. A Failure To Comply With The Requirements For Maintenance Of Prequalification May Result In The Prequalification Being Withdrawn Or The Level Downgraded In Accordance With The Dit Building Conditions Of Prequalification. Terms And Conditions Of The Prequalification Process Can Be Downloaded At: Https://dit.sa.gov.au/__data/assets/pdf_file/0006/254436/dit_conditions_of_prequalification_update_september_2023.pdf *** Applications From New Companies Are Now Being Accepted. *** (existing Approved Prequalified Suppliers Need Not Re-apply.) Please Note, Successful Applications To The Prequalification System Will Be Required To Adhere To South Australia Industry Participation Rules Of Engagement. More Information Can Be Found At The Following Link: Https://www.industryadvocate.sa.gov.au Please Email Your Completed Application To: Dit.buildingprequal@sa.gov.au **please Note: Applications Will Not Be Accepted Via This Site.** (the Department Reserves The Right To Cancel This Arrangement At Any Time.)

Details: Rfq Type Goods Goods Tools & Machinery Reference Number Gd12500386 Title Ladder Step Fibreglass 2.4m 8 Steps Description 15 Each X Ladder Step Fibreglass 2.4m 8 Steps Specification* Ladder - Type Step Material Fibreglass Height 2.4m Steps 8 Steps Standards Sabs Or Alternative Approval Authority Approved And In Accordance With Cct Standard Cee 041 Tolerance A Tolerance Of 10% Of The Specified Dimensions Will Be Accepted. Wherever Reference Is Made To Any Particular Trade Mark, Name, Patent, Design, Type, Specific Origin Or Producer, Such Reference Shall Be Deemed To Be Accompanied By The Words "or Equivalent". Nb!!! Please Ensure That You Attach The Technical Data Sheets And Pictures Of The Item Quoted On, To Your Rfq Submission****failure To Adhere To This Requirement, May Result In Your Offer Being Non-responsive**** Allocation Of Preference Points *nb The Municipal Bidding Document 6.1 (mbd 6.1) Has Been Amended, In Order To Be Eligible For Preference Points Bidders Are Required To Submit A Duly Completed Mbd 6.1 Document With Supporting Documents With Each And Every Rfq Submission. In Order To Qualify For Preference Points, It Is The Responsibility Of The Bidder To Submit A Duly Completed Mbd 6.1 Form (bidders Must Indicate How They Claim Points For Each Specific Goal). Submit Documentary Proof Of Updated Bbbee Certificate/sworn Affidavit And/or Cipc Certificate With Each Rfq Submission To Validate Specific Goals. (if A Bidder Is Registered And Active On The City#s Supplier Database And Has Submitted The Bbbee Certificate/ Sworn Affidavit/ Cipc Certificate, The Submission Of Said Documents Is Not Necessary). It Is Therefore Incumbent On Suppliers To Ensure That Documents Are Kept Updated. Failure To Comply With The Above Will Result In A Zero (0) Allocation For Preference Points. *** Please Ensure That All Required Insurances Such As Your Public Liability, Employers Liability Or Coida And Motor Vehicle Insurance Are Attached And That They Are Up-to-date. If You Utilise Couriers And Do Not Have Motor Vehicle Insurance, Then Please Mention This. Also Ensure That Your Updated Declaration Of Interest And Bbbee Is Attached At All Times*** Delivery Date2024/12/23 Delivery Toelectricity - Ndabeni Red1 Plant / Ph 511 0410 Delivery Address0000 Melck Street, Ndabeni Contact Personn.mtati Telephone Number0214006739 Cell Number Closing Date2024/11/05 Closing Time12 00 Pm Rfq Submission Fax0000000000 Rfq Submission Fax 2 Buyer Email Addressgd1.quotations@capetown.gov.za Buyer Detailsn.mtati Buyer Phone0214006739 Attachments No Attachments Note This Commodity Has Gone Live For Only Quoting On The E-procurement Portal. No Manual Submissions Will Be Accepted For This Commodities. Suppliers Will Need Must Log In To E-services Portal To Access Rfqs. Bids Must Be Compliant With The Preferential Procurement Regulations, 2017 Including But Not Limited To Local Content, Functionality, Price And Preference, Eligibility Criteria And Relevant Statutory Criteria. The Details Of This Are Contained In The Rfq Document And/or The Specification Advertised Via E-procurement. Only Locally Produced Goods Or Locally Manufactured Goods, Meeting The Stipulated Minimum Threshold For Local Production And Content, Will Be Considered, Where Applicable.