Water Tender Results

CATEGORY: Cement 43 Grade OPC packed in HDPE bag each 50 kg wt Conform to IS 8112 1989 Make Birla Gold or Ambuja or Ultratech or ACC or JK or Dalmia , Coarse Sand free from vegetation , Coarse aggregate 20mm graded , Coarse aggregate 40mm graded , Coarse Aggregate 40 to 63 mm graded , Stone Boulders 9 inch to 12 inch , Mild Steel Bars of size 8 mm dia Conform to IS 432 Part 1 1982 TMT Bar Make TATA or SAIL or JSW , Water Proofing Compound Conform to IS 2645 2003 Make Pidilite or Dr Fixit or Fevicol , PBS Roll 20m Long Width of 0 point 9Mtr ISI Marked with Min weight of 34 Kgs Roll , GI binding wire TATA SAIL JSW , Cement base paint Scowcem Make Berger or Asian or Nerolac , Slack Lime , Painting brush 4 inch ISI Marked , HDPE sand bag of size15 inch x 30 inch , Anti corrosive red oxide zinc chromate primer confirming to IS 5 2004 Make Berger or Asian or Nerolac , Synthetic Paint enamelled OG confirming to IS 5 2004 Make Berger or Asian or Nerolac , Thinner Make Nerolac or Berger or Asian , SRT 2440 x 613 x 180 2 mm thick MS Sheet Hot Rolled Steel with nuts and bolts incl One coat of Red Oxide Make TATA or SAIL or JSW , SRT 1840 x 613 x 180 2 mm thick MS Sheet Hot Rolled Steel with nuts and bolts incl One coat of Red Oxide Make TATA or SAIL or JSW , ISMB hot rolled MS 200 x 100x 4M Make TATA or SAIL JSW , Prefeb Mild Door Steel of size 750x 1800mm double shutter outer frame ISA 40x40x6mm and door shutter ISA 35x35x5mm ISA 30x30x3mm 0 point 75 M x 1 point 8 M Double Shutter TATA SAIL JSW , Mild Steel Bars of size 10 mm and above dia conforming to IS 432 Part I 1982 Make TATA or SAIL or JSW , Loop Holes 780 x 300 mm Make TATA or SAIL or JSW , Loop Holes 1000 x 300 mm Make TATA or SAIL or JSW , Loop Holes 1250 x 350 mm Make TATA or SAIL or JSW , Ventilator steel 600x450 mm ISA 30x30x3mmand 1 mm isa 35x35x6mm and tower bolt 8mm dia 75 mm long make TATA Sail JSW , Wooden plank for shuttering II class wood of size 3 x0 Point 3 x0 point 026 m , Wooden Scantling various size , Nails various sizes , Air terminatoin single pointed aluminium rod 12mm dia and 300mm long. , Testing point terminal block made of gun metal and phosphorus bronze size 75x75x25mm drilled and screwed including 3 Nos 8mm dia 25mm long hexagonal head screw , Aluminium strips 25x3mm , Galvanised iron strip 32x6mm , Funnel fitted with 20mm dia GI Pipe 1 point 5m long Make Jindal or Tata or Kalinga , Earthing Plate 600x600x6mm GI steel suitable for GI strip fittings drilled with two nos holes for 6 mm dia near one side , CI earth pit cover of size 300x300x6mm with angle of size 20x20x3mm thick with MS frame , Charcoal , Salt , Insulating PVC block 75x75x30 mm with insulating clamp nut and bolt Make Presto or Polycab or Finolex

CATEGORY: Cement 43 Grade OPC packed in HDPE bag each 50 kg wt Conform to IS 8112 1989 Make Birla Gold or Ambuja or Ultratech or ACC or JK or Dalmia , Coarse Sand free from vegetation , Coarse aggregate 20mm graded , Coarse aggregate 40mm graded , Coarse Aggregate 40 to 63 mm graded , Stone Boulders 9 inch to 12 inch , Mild Steel Bars of size 8 mm dia Conform to IS 432 Part 1 1982 TMT Bar Make TATA or SAIL or JSW , Water Proofing Compound Conform to IS 2645 2003 Make Pidilite or Dr Fixit or Fevicol , PBS Roll 20m Long Width of 0 point 9Mtr ISI Marked with Min weight of 34 Kgs Roll , GI binding wire TATA SAIL JSW , Cement base paint Scowcem Make Berger or Asian or Nerolac , Slack Lime , Painting brush 4 inch ISI Marked , HDPE sand bag of size15 inch x 30 inch , Anti corrosive red oxide zinc chromate primer confirming to IS 5 2004 Make Berger or Asian or Nerolac , Synthetic Paint enamelled OG confirming to IS 5 2004 Make Berger or Asian or Nerolac , Thinner Make Nerolac or Berger or Asian , SRT 2440 x 613 x 180 2 mm thick MS Sheet Hot Rolled Steel with nuts and bolts incl One coat of Red Oxide Make TATA or SAIL or JSW , SRT 1840 x 613 x 180 2 mm thick MS Sheet Hot Rolled Steel with nuts and bolts incl One coat of Red Oxide Make TATA or SAIL or JSW , ISMB hot rolled MS 200 x 100x 4M Make TATA or SAIL JSW , Prefeb Mild Door Steel of size 750x 1800mm double shutter outer frame ISA 40x40x6mm and door shutter ISA 35x35x5mm ISA 30x30x3mm 0 point 75 M x 1 point 8 M Double Shutter TATA SAIL JSW , Mild Steel Bars of size 10 mm and above dia conforming to IS 432 Part I 1982 Make TATA or SAIL or JSW , Loop Holes 780 x 300 mm Make TATA or SAIL or JSW , Loop Holes 1000 x 300 mm Make TATA or SAIL or JSW , Loop Holes 1250 x 350 mm Make TATA or SAIL or JSW , Ventilator steel 600x450 mm ISA 30x30x3mmand 1 mm isa 35x35x6mm and tower bolt 8mm dia 75 mm long make TATA Sail JSW , Wooden plank for shuttering II class wood of size 3 x0 Point 3 x0 point 026 m , Wooden Scantling various size , Nails various sizes , Air terminatoin single pointed aluminium rod 12mm dia and 300mm long. , Testing point terminal block made of gun metal and phosphorus bronze size 75x75x25mm drilled and screwed including 3 Nos 8mm dia 25mm long hexagonal head screw , Aluminium strips 25x3mm , Galvanised iron strip 32x6mm , Funnel fitted with 20mm dia GI Pipe 1 point 5m long Make Jindal or Tata or Kalinga , Earthing Plate 600x600x6mm GI steel suitable for GI strip fittings drilled with two nos holes for 6 mm dia near one side , CI earth pit cover of size 300x300x6mm with angle of size 20x20x3mm thick with MS frame , Charcoal , Salt , Insulating PVC block 75x75x30 mm with insulating clamp nut and bolt Make Presto or Polycab or Finolex

CATEGORY: Cement OPC 43 Grade packed in HDPE bag each 50 Kg wt conforming to IS 8112 1989 Make Birla Gold or Ambuja or Ultratech or ACC or JKJ Dalmia , Stone boulder 9inch to 12inch , Coarse Aggregate 40 to 63mm , Coarse sand free from vegetation , Coarse Aggregate 20mm graded . , Coarse Aggregate 40mm graded , Water proofing compund conforming to IS 2645 2003 Make Pidilite or Dr Fixit or Fevicol , PBS Roll 20m Long Width of 0 point 9Mtr ISI Marked with Min weight of 34 Kgs per Roll , Cement based paint Snowcem Make Berger or Asian or Nerolac , Synthetic paint enamelled OG conforming to IS 5 Ur 2004 Make Asian or Berqer or Nerolac , Synthetic Paint enamelled Brown confirming to IS 5 2004 Make Berger or Asian or Nerolac , Anti corrosive Red Oxide zinc chromate primer conforming to IS 5 2004 Make Asian or Berger or Nerolac , Loop Holes 1000 x 300 mm Make Tata or Sail or JSW , Ventilator Steel 300 x 450 mm will be fabricated using ISA 35 x 35 x 5mm for outer frame and ISA 30 x 30x 3mm for shutter frame with blace sheet as per TS , MS Binding Wire , ISMB hot rolled MS 125 4000 mm long Make Tata or Sail or JSW , ISMS hot rolled MS 125 1200 mm long Make Tata or Sail or JSW , SRT 1840 x 613x 180 mm 2 mm thick MS Sheet Hot rolled steel with nuts bolt incl one coat of Red Oxide Make Tata or Sail or JSW , Prefeb mild steel door of size 900x 1700mm outer frame made out of ISA 40x 40x6mm and door shutter frame of ISA 35x35x5mm and all stiffner as per TS , HDPE sand Bags khaki colour of size 30 inchx15inch inside laminated interlocking stiched weight of the each bag should not be less then 42 45 gms per Bag , Mild steel Bar of size 6 to 8 mm dia conforming to IS 432 Part ll 1982 Make Tata or Sail or JSW , Prefeb folding double sleeping bunks madeof MS columns 65x 65x6mm and ms plate form made of ISA 40x40x6mm hold fast 65x65x6mm 230mm long 12mm as per TS , Polythene sheet colour less and weight of sheet shall be not less than 70gm or Sqm , Wooden planks for shuttering llnd class wood of size 3 point 0 x 0 point 30 X 0 point 026m , Wooden Scantling various sizes , Nails various size , Earthing Plate 600x600x6mm GI steel suitable for GI strip fittings drilled with two nos holes for 6 mm dia near one side , Air termination single pointed aluminium rod 12mm dia and 300mm long , GI pipe 20 mm dia light grade Make Jindal or Tata or Kalinga , GI pipe 40 mm dia light grade Make Jindal or Tata or Kalinga , Insulating PVC block 75x75x30 mm with insulating clamp nut and bolt Make Presto or Polycab or Finolex , Testing point terminal block made of gun metal phosphorus bronze size 75x75x25mm drilled and screwed including 3 Nos 8mm dia 25mm long hexagonal head screw , Aluminium strips 25x3mm , Nut and bolts 6 mm dia 30mm long with check nut and washer , Charcoal , Salt normal , CI earth pit cover of size 300x300x6mm with angle iron of size 20x20x3mm thick with MS frame , Funnel fitted with 20 mm diameter GI Pipe 1 point 5 m Long Pipe Make Jindal or Tata or Kalinga , Galvanised iron strip 32x6mm

Description: OJLS Living shelter 12.00 M X 7.60 MX 4.75 M,Water Storage tank triple layer 1000 Ltrs,Staging of w

CATEGORY: Cement OPC 43 Grade packed in HDPE bag each 50 Kg wt conforming to IS 8112-1989 Make-Birla Gold,Ambuja,Ultratech, ACC,JK or Dalmia under Job No 2504 AGS PD as per store list att , Stone boulder 9 inch to 12 inch , Coarse Aggregate 40 to 63mm , Coarse sand free from vegetation , Coarse Aggregate 20mm graded , Coarse Aggregate 40mm graded , Mild steel Bar of size 6 to 8 mm dia conforming to IS 432 Part I 1982 Make- Tata,Sail,JSW , Water proofing compund conforming to IS 2645-2003 Make- Pidilite,Dr Fixit,Fevicol , Quick setting compound Make- Pidiite,Quick Fix,Fevicol , PBS Roll 20m Long , Width of 0.9Mtr ISI Marked with Min weight of 34 Kgs oblique Roll , GI binding wire TATA,Sail,JSW , Cement based paint Snowcem Make-Berger,Asian,Nerolac , Slack lime , Painting brush 4 inch ISI Marked , HDPE sand Bags khaki colour of size 30inch x 15inch inside laminated interlocking stiched, weight of the each bag should not be less then 42-45 gms oblique Bag , Anti corrosive Red Oxide zinc chromate primer conforming to IS-5-2004 Make-Asian,Berger,Neroloc , Synthetic paint enamelled OG conforming to IS 5-2004 Make- Asian,Berger,Nerolac , Thinner Make-Nerolac,Berger,Asian , SRT 2440 x 613 x 180 , 2 mm thick MS Sheet Hot Rolled Steel with nuts and bolts incl One coat of Red Oxide Make- TATA, SAIL,JSW , ISMB hot rolled 200x100mm and 4 mtr long Make-TATA,SAIL,JSW , Prefeb mild steel door of size 750x 1800mm double shutter, outer frame made out of ISA 40x 40x6mm and door shutter frame of Make-Tata,Sail,JSW as per store list , Mild steel Bar of size 6 to 8 mm dia conforming to IS 432 Part I 1982 Make-Tata,Sail,JSW , Loop Holes 780 x 300 mm Make-TATA, SAIL,JSW , Loop Holes 1000 x 300 mm Make-TATA, SAIL,JSW , Loop Holes 1250 x 300 mm Make-TATA, SAIL,JSW , Ventilator Steel 600x450 mm will be fabricated using ISA 35x35x6mm for outer frame and ISA 30x30x3mm Make-TATA, SAIL,JSW as per store list , Wooden planks for shuttering IInd class wood of size 3.0 x 0.30 x 0.026m , Wooden scantling various size , Nails various size , Air terminal single pointed aluminium rod 12mm dia and 300mm long , Testing point terminal block make of Gun metal and phosphorus bronze size 75x75x25mm drilled and screwed including 3 Nos 8mm dia 25mmas per store list , Aluminium strips 25x3mm. , Galvanised iron strip 32x6mm. , Funnel fitted with 20mm dia GI Pipe 1.5m long Make-Jindal, Tata, Kalinga , Earthing Plate 600x600x6mm GI steel suitable for GI strip fittings, drilled with two nos holes for 6 mm dia near one side , CI earth pit cover of size 300x300x6mm with angle iron of size 20x20x3mm thick with MS frame , Insulating PVC block 75x75x30mm with insulating clamp nut and bolt Make- Presto,Polycab, Finolex , Charcoal , Salt

Description: Custom Bid for Services - Operation and Maintenance of Water Treatment Plant of Thin Slab Caster, T

Description: Goods Transport Service – Per Trip based Service - Open Water; Water Tank Truck; Medium Tanker

G-02(a) (rebid) Supply Of Geo-bags Type-c And Sewing Thread For Palashbari And Gumi Subproject.

Description: RO Water Treatment System Above 50 LPH Filtration Capacity

Description: RO Water Treatment System Above 50 LPH Filtration Capacity