Tender Results of National Physical Laboratory

Amc Of Ftir Spectrophotometer Nicolet Is50 Sr. No. Aup2010769

Repair And Service Ax64004 Mass Comparator Make Mettle Toledo Modal No. Ax64004 Sr. No. 1129423373 Spare Parts As Per Requirement

Preamplifier With Cable For 6430 Sub Femto Ampere Meter

Display Control Unit Omni Control 400 For Tmp Hipace 700 With Power Supply

External Repair And Painting Of Staff Qtrs. Block Dii, E, Box Type, Old C And Msb At Npl Colony

External Painting And Misc. Repair Work Of Advanced Metrology Building At Npl Campus

Annual Renovation Contract On The Basis Of Percentage Bidding On Civil

CAN: Multi-Species Laboratory ATD/GC/MS system-NPL require to replace existing Automatic Thermal Desorption (ATD) instrument which is linked to a Gas Chromatograph (GC) fitted with both a Flame Ionisation Detector (FID) and a Mass Spectrometer. The replacement system will need to have the capacity to automatically analyse up to 50 industry standard Thermal desorption tubes (Perkin-Elmer type) at one time, plus to have the ability to analyse samples captured within canisters, both methods being able to measure concentrations down to parts-...

sSNOM Upgrade for University of Manchester-Upgrade enabling time-resolved pump-probe spectroscopy for cryogenic THz-TDS near-field measurements. The pump laser must be synchronized with the existing THz-TDS spectroscopy and cryogenic near-field systems. The upgrade includes a laser amplifier unit with free-space coupled optical output at 780nm, 100MHz rep rate, pulse energy >1.3nJ, >140mW output power, and customized fiber patch cord for temporal overlap of pump-probe pulses. Additionally, a transmission module enables static pump-probe ...

VEAT_129092-External Beam Gamma Teletherapy System-The NPL requirement is for an External Beam Gamma Teletherapy System using Cobalt-60 source. This is to replace our current unit which is and failing due to the obsolescence of the device making replacement parts difficult to source. The device must be able to move the Cobalt-60 source to its exposed position consistently within 0.1 seconds as well as the position being reproducible within 0.1mm. After a thorough look at the market only one supplier capable of achieving the required specifica...