Hvac Tender Results

1. BACKGROUND / RATIONALE UNICEF office in Delhi is currently undergoing an energy efficient retrofit of the existing HVAC system in the building, with a goal to significantly boost the energy efficiency and environmental performance. This modernization effort is geared towards meeting stringent energy conservation targets and supporting the office's journey towards carbon neutrality. This retrofit encompasses conducting civil and electrical works related to implementation of the chiller plant, with minimal impact on daily operations. To complete the retrofit within the fixed timelines, UNICEF India has developed specifications for civil and electrical works for this project. The TOR aims to identify a suitable service provider for supply, civil and electrical works, testing, and commissioning of civil and electrical works related to the Chiller Plantroom to the installation site in the building. 2. PURPOSE OF ASSIGNMENT The main purpose of the assignment is to conduct civil and electrical works related to implementation of energy efficient chiller plantroom in the UNICEF India office building in New Delhi. 3. OBJECTIVE/S The primary objective is to conduct civil and electrical works for the chiller plantroom implementation, ensuring it meets operational requirements and industry standards. The other goals under this assignment include: • Dismantling: Safely relocate and dismantle civil and electrical components in the existing HVAC equipment (as per BOQ), ensuring the proper relocation of components to the ground floor and the removal of electrical panels. • Civil Works: Execute comprehensive civil tasks, including setting up temporary partitions, demolishing existing structures, constructing new walls and lintels, installing waterproofing layers, laying new floor tiles, and installing fire-resistant doors, followed by finishing touches like painting and anti-termite treatment. . Electrical Works: Install new power cables and grounding strips, integrate new equipment with electrical panels, and set up and connect cable trays and terminations to ensure a fully operational electrical system. 4. MAJOR TASKS TO BE ACCOMPLISHED • Supply: o Electrical Substation: 11kV-1000 KVA Compact Substation, including HT VCB Breaker (630A VCB), Distribution Transformer, and LT Distribution (2000A ACB). o LT Panel: LT Panel with 2000A FP ACB (EDO) with MPR, 800A FP ACB, 2000A TPN AL.BUS BAR, and various outgoing feeders (630A FP MCCB, 400A FP MCCB, 250A FP MCCB, 200A FP MCCB, 125A FP MCCB, 100A FP MCCB, 63A FP MCCB, 630A FP ATS). o HVAC Panel: HVAC Panel with 630A, 4P MCCB (50 KA), digital voltmeter, 2Amps MCBs, 0-630 Amps digital Ammeter, 40/5A, 10VA, CL-1 CTs, selector switch, phase indicating lamps, 630A TPN AL.BUS BAR, and various outgoing feeders (250A FP MCCB, 125A FP MCCB, 63A FP MPCB, 32A FP MPCB, 63A FP MCB). o Hot dip galvanized cable tray: 14G gauge, wire mesh or perforated type, in specified dimensions, complete with ceiling suspenders, tee sections, flat sections, nuts and bolts, and earthing components. o XLPE ARM CU/AL Cables (11KV E, & L.T. CABLE): Supply of 11KV E & L.T. cables with XLPE insulation, PVC outer sheath, and armored construction. o Cable termination kit: Includes double compression glands, AL/CU crimping type sockets, and a hydraulic crimping tool. o Earthing grid kit: Includes copper/G.I. strips, spacers, brass bolts and nuts, washers, G.I. pipe (if required), welding materials, black bitumen paint, and cotton tape. • Installation: o Compact Substation Installation: This includes the setup of an 11kV-1000 KVA Compact Substation, incorporating an HT VCB Breaker (630A VCB), a Distribution Transformer, and an LT Distribution panel (2000A ACB). Proper alignment and secure mounting will be ensured as per project specifications. o HVAC and LT Panel Installation: Installation of an HVAC panel and an LT panel will be carried out according to specified dimensions and features, ensuring all electrical connections are secure and compliant with safety standards. o Cable Tray and Support Installation: Hot dip galvanized cable trays (14G, wire mesh or perforated) will be installed for effective cable management. This will be complemented by the installation of ceiling suspenders, tee sections, and flat sections, along with necessary nuts and bolts to provide structural support. o Earthing Components Installation: The installation will also include all required earthing components, ensuring proper grounding to enhance safety and protect the system from electrical faults. o Complete installation of the new HVAC Plantroom system, including necessary infrastructure modifications. • Testing and Commissioning: o The testing and commissioning phase will encompass several key components, including the 11kV-1000 KVA Compact Substation, which features an HT VCB Breaker (630A VCB), a Distribution Transformer, and an LT Distribution panel (2000A ACB), each will be verified for proper alignment and secure operation as per project specifications. o Additionally, the HVAC panel and LT panel will undergo testing to ensure all electrical connections are secure and compliant with safety standards. Hot dip galvanized cable trays (14G, wire mesh or perforated) will be assessed for effective cable management, alongside the installation of ceiling suspenders, tee sections, and flat sections, with all necessary nuts and bolts for structural integrity. o Furthermore, the testing and commissioning of earthing components will ensure proper grounding to enhance safety and protect the system from electrical faults. Post the award of the contract, the following tasks shall be accomplished for civil works as described in the RFP: • Supply: o The civil works items to be supplied include temporary partitions made of particle board with aluminium channels for support, brick walls, reinforced concrete lintels, waterproofing systems, vitrified floor tiles, gypsum partitions and ceilings. During the execution of the mentioned tasks, the contractor should ensure minimum shut-down time & arrangement of standby equipment for smooth operation of the building. 5. DELIVERABLES AND DEADLINES - Workplan report 1st week - Delivery Challan and Storage Receipt 4th week - Commissioning report 6th week - Workplan and final installation report with handover documents Up to 14th week 6. DUTY STATION: New Delhi, India 7. CONTRACT /PROJECT MANAGEMENT: Deepak Gera, Admin Specialist, A&F Section Rajat Shuvra Roy, Admin Officer, A&F Section 8. OFFICIAL TRAVEL INVOLVED (ITINERARY AND DURATION): Not Applicable 9. ESTIMATED DURATION OF CONTRACT: 14 weeks for the execution works 10. OVERALL VALUE OF CONTRACT: - Dismantling Cost = INR 1,336,545.00 - Civil Works =INR 5,187,870.00 - Electrical Works = INR 7,199,645.00 Total Price = INR 13,724,060.00 / USD 162,511.07 11.PAYMENT SCHEDULE: -Dismantling & Submission of Good for Construction drawings and execution schedule 20% =INR 2,744,812.00 - Delivery of equipment/ material 30% =INR 4,117,218.00 - Completion of all site execution works 30% = INR 4,117,218.00 - Submission of the Testing, Commissioning and Performance Verification Report, post execution drawings and handover documents 20% = INR 2,744,812.00

This Amendment Is To Inform All Interested Parties That This Requirement Is Being Canceled. A New Requirement Will Be Posted At A Later Date And Time. All Interested Parties Must Reply To The New Requirement Once Posted. The Department Of Veterans Affairs, Network Contracting Office (nco) 2 Intends To Release A Commercial Sdvosb Set Aside For Water Treatment Of Hvac And Potable Water Systems At The James J. Peters Va Medical Center, Bronx Campus. The Request For Quote (rfq)/solicitation Number Is 36c24221q0291. All Other Contract Details Including Full Specification Will Be Included In The Rfq Which Will Be Release On Or Before December 16, 2020. The Closing Date For The Solicitation Will Be January 29, 2021 At 10:00am Est. The North American Industry Classification Systems (naics) Is 561210 (facilities Support Services) And The Standard Size Is $41.5 Million.

CATEGORY: COVER ASSY , GEAR LEVER KIT , POLY V BELT , RUBBER HOSE PRIMING PUMP TO FILTER , ASSY SUCTION LINE , ASSY HVAC CONTROL , BRAKE SHOE WITH LINING STD , SEAL OIL FOR CRANK SHAFT FRT , OIL FILTER , GAUGE ASSY FUEL LEVEL , BRAKE SHOE , BRAKE PAD SET , RETAINER KICK STARTER SPRING , STAND COMP MAIN , SPARK PLUG M 10 BOSCH , SPARK PLUG M14W5DC , OIL SEAL KICK STARTER G20X27X5 DOUUBLE , CARBURETOR BS 29 , REAR HUB SPROCKET 38 TEETH , SPROCKET DRIVE 16T , MAIN CABLE HARNESS , FUEL TAP , BALL BEARING , GRIP COMPLETE THROTTLE RH , PISTON RING SET , MASTER CYL POWER UNIT , ASSY POWER TAKE OFF

CATEGORY: Welding Magnet Set , Drill machine heavy duty 900 watt , Stanley STG9125 900W 125mm small angle grinder yellow and black , Stanley STDH8013 800W 13mm reversible percussion drill yellow and black , Grinding wheel 5 inch BOSCH , Oil Filter Clamp , Digital Hydrometer , HVAC Leak Detector , AC refilling system with accessories , Clamp meter Freq Hz , Cutting piler set DC Neers , Electric engraving machine 230V , Tool Bag Stanley , Screw Driver set stanley , Nose piler set 6 inch Stanley set of 3 , Stanley LN Key Set Set of 12 , Stanley Nose piler 7 inch Set of 3 , Trolley Caplliper , Heavy Duty hand pallet Truck 5 Ton , Winter Tool Kit EE Mech

HVAC (climatizare) la Cinematograful Victoria - Sala Unirii” Cod principal CPV: 39717000-1 Ventilatoare şi aparate de aer condiţionat (Rev.2); ii. Service în perioada de garanţie, Cod secundar CPV 45331000-6 Lucrări de instalare de echipamente de încălzire, de ventilare şi de aer condiţionat avand inclusa si operatiunea de instalare, punere in functiune si efectuare a unui training de 3 zile Conform art. 3 alin. 14 lit. n din Legea nr. 98/2016.umărul de zile până la care se pot solicita clarificări înainte de data limită de depunere a ofertelor: 12 zile. Autoritatea contractantă va răspunde solicitărilor de clarificări înainte cu pana la 6 zile de data limită de depunere a ofertelor.

Infrastructure Development For Smart Township Of Hal Helicopter Factory At Biderahalla Kaval, Gubbi(t) Tumakuru(d) Phase-1: Sh Planning, Designing And Construction Of Various Rcc Buildings For Staff Qtr (b&c) With Basement Parking, Senior Officers Qtr, Transit Accommodations For Officers And Workmen And Guest House With Stilt Parking, Club House, Primary School, Health Center, Market Complex, Township Maintenance Office, Electrical Substation, Gate Complex, Oat, Supply Of Furniture, Indoor Gym Equipment Etc. I/c Internal Water Supply, Drainage, Sanitary Installation, 100kld Stp, Rwh, And All E&m Service Like Iei, Fa, Ff, Lifts, Dg, Ups, Cctv,hvac,lan,ip And Their Integration, Making The Entire Smart Township Fit For Occupation All Complete On Epc Basis Including Development Of Building Information Models.

CATEGORY: Operation and Maintenance Of Electrical Systems/Electrical Installations - Providing Operation Maintenance of Electrical SystemSubStationBMS Solar System DG Sets HVAC system and Elevators at Neer Shakti Sadan Office Complex Sector33 NHPC Limited Se.. , Operation and Maintenance Of Electrical Systems/Electrical Installations - Providing Operation Maintenance of Electrical and Mechanical Installations and operation of DG Sets Chillers Elevators at Jyoti Sadan of NHPC Limited Corporate Office Secto.. , Operation and Maintenance Of Electrical Systems/Electrical Installations - Providing Operation Maintenance of Electrical Mechanical Installations at NHPC Residential Complex Sector 41 Faridabad for Two years as per SOW SCC in ATC of Bid , Operation and Maintenance Of Electrical Systems/Electrical Installations - Providing PPE TOOLS CONSUMABLE TP for Operation Maintenance of Electrical Mechanical Installations at NHPC Limited Office ComplexSector33 and Residential Complex Sector41 Fa..

EEEF as TA contractor is searching for consultants/Consortium to provide legal, technical and financial advice to the Barcelona Metropolitan Area ( AMB) in Spain to support the preparation of the investment programme "Energy Efficiency and Maintenance Service for Public Buildings and Street Lighting." The objective is to increase energy efficiency levels in 15 municipalities by (I) upgrading 77 buildings (i.e., installation of remote management systems, replacement of gas/diesel boilers for HVAC system and/or biomass DH, lighting systems in buildings, and electrical switch off, installation of PV systems in 16 building to create energy communities,), (ii) installing 12 new biomass DH, and (iii) street lighting retrofit. Please note, this refers to a single contract in total, where two tenders will be published (2 lots). Please see ToR at: https://www.eeef.lu/eeef-ta-facility.html?file=files/downloads/technical_assistance/2023-06/AMB-TA_eeef_ToR_15-August-2023.pdf&cid=712

6/7/2023 The Following Document Is Uploaded. final Questions And Answers - Part 2 2023 06 07 6/1/2023 The Following Documents  Are Uploaded  amendment 0001 questions And Answers pre-conference Site Visit And Attendence  ----------------------------------------------------------------------------------------------------------------------------------------- construction Contractor Shall Perform All Required Actions In accordance With The Design Criteria And Supporting Documents. The interior Renovation/fit-out Includes Demolition, Wall Assembly changes, Reflective Ceiling Plan And Sprinkler Layout, electrical/data, Hvac Modifications, Finishes, Audio Visual Design, entry Card Reader Access, Life Safety, And Phasing To Maintain occupancy Throughout Construction. the Contractor Will Perform A Wide Range Of Activities, Such As: constructability Reviews, Cost Estimating, Work Phasing Reviews, scheduling And General Construction Services. The Contractor Is At risk And Is Responsible For Involvement In The Project Development and Administration Of The Construction. The Contractor Shall Have complete Responsibility For All Construction Related To The Project scope.

Cette affaire consiste à fournir environ 183 conteneurs aménagés issus de conteneurs maritimes en vue du stockage de matériels de Moyens Locaux de Crise (MLC) de manière pérenne en prenant en compte les exigences minimales d'un Centre Nucléaire de Production d'Electricité: • Résistance au séisme SMS et à l’inondation en cas d’atteinte de la côte majorée de sécurité. (PT ECS 30.III de l’ASN) • Résistance aux agressions prévues dans le cadre du rapport de sûreté de chaque site (prescription n°4 de la DI115) Les aménagements permettent de garantir la robustesse aux agressions: équipements de conditionnement (HVAC), de clapets coupe-feu, d'isolation et de renforcement d'épaisseur notamment.