Fabrication Tender Results

Description: Supply, Fitting and providing of MS And SS Pati With Fabrication Related Works. At. Bhare, Tal.

Description: Design, Optimization, Fabrication and Qualification of Optical Periscope

Description: Fabricated rollers (50 DPRC)

Description: Fabrication, Erection of steel stand and providing overhead water tank for outdoor toilet at Pajifond

Description: 5698NS: SS AC Location box half (fabricated of 2.5 sq.mm SS sheet fixed type made of Special grade SS

Description: Y--Exhibit Planning, Design and Fabrication for Halea

Description: Supplying, Fabrication and fixing of openable type closure for cut out at terrace level of Additional

Digging Of Trenches Of Size 450 Mm X 600 Mm, 92mtr Starting From State Electricity Board Energy Met CATEGORY: Digging of trenches of size 450 mm x 600 mm, 92mtr starting from state electricity board energy meter to LT Panel inside the LT Panel room and to and from LT panel to DG set , Providing and grouting of 2 Nos of 3inch dia G I Pipes on the Cement concrete Flooring , Providing, grouting and fixing 2 Nos of 3inch dia G I Pipes along the MS stand of main MCCB at energy meter , Unwinding roll of 185sqmm 3 and half core cable two length of 78mtr each, 95sq mm 3 and half core two length 70mtr each, from their cable drum and laying the cable through the trenches and GI pipes , Reconstructing the CC flooring and repairing the area with cement concrete and stone aggregate mixer 1 ratio 2 ratio 4 and finishing the surface, Complete in all respect , Providing and making cable connection with Aluminum lugs of two length each of both cables of 185sqmm and 95sqmm of phase and neurtal and earthings at the both end of the cable , Providing and fixing of LT Cable route marker made up of 2 and half inch dia signage with 10mm x 2ft long MS rod , Installation of LT Panel at xtr. building by shifting the LT panel manually by labours from storing area to the work place and keeping the panel on angle iron stand by proper grouting on ground , Providing and fabricating of MS angle iron stand using 50mm x 50mm x 5mm angle iron with primering and painting the size of frame for LT panel Size 1800mm x 1800mm x 300mm , Installation and Testing of 62.5KVA Canopy type Diesel Generator set at FM transmitter AIR Maharajganj. Work is to be carried out as per scope of work and Annexure A attached

Description: 56--Fabricate and install barricades at Yellowstone National Park

Description: Fabrication supply installation commissioning of 1 set bearing coolers for 60 MW Generator Unit2and4