Tender Results of Department Of Electronics And Information Technology

CATEGORY: Firewall - NGFW (Q2) , Layer 2 Access Switch (V2) (Q2)

CATEGORY: Tungsten Probe Pins Diameter 0.15mm as per specifications attached , Tungsten Probe Pins Diameter 0.17mm as per specifications attached , Tungsten Probe Pins Diameter 0.25mm as per specifications attached , Insulation epoxy rated for regular temperature usage up to 60 C 1 lbs , Insulation epoxy rated for high temperature usage up to 300 C 2 lbs , 12 Inch long Kapton Sleeving for 0.15mm diameter needles , 12 inch long Kapton Sleeving for 0.17mm diameter needles , 12 inch long Kapton Sleeving for 0.25mm diameter needles

CATEGORY: 03 Cylinders each containing 170 Gram of PHOSPHENE (PH3) SDS2 Rev D (Q3) , 03 Cylinders each containing 440 gram (Total 1320 Gram) of Arsine AsH3 SDS (II) Rev B (Q3)

CATEGORY: Air handling unit of Modular construction , Pan type Humidifier , Three way, motorised flow control and mixing valve , Butterfly valve, size 3 inch , Butterfly valve, size 2 inch , Y Strainer having CI or MS body and SS or Brass mesh , Pipe MS C class, size 3 inch , Pipe MS C class, size 2 inch , Insulation using pipe sections of TF quality thermocole , Insulation of hot water line with miniral wool , Purge and drain points, size 1 inch , Pressure gauge, size 4 inch dial type , Temperature gauge, size 4 inch dial type , Temperature, Humidity, Dew point sensor cum transmitter , Temperature sensors cum transmitter at chilled water 3 inch and the hot water 2 inch pipe lines , GI duct, using 20 gauge or 1.00 mm GI sheet, 120 gsm, , GI duct, using 24 gaug or 0.63 mm GI sheet, 120 gsm, , Nitrile rubber insulation , 19 mm thick, , Fresh air box or plenum, floor mounted, Capacity-4000 CFM, , Automatic smoke dampers , SS 304, Ball valve, size half inch threaded type for humidifier. , SS 304L Pipe, size matching with steam outlet socket of the humidifier, , Insulation with miniral wool, , GI Pipe, Size- half inch, Class A complete with fittings. , M S supporting structure, nuts, bolts, gaskets etc. , Supply of 2 pair, 0.75 Sqmm or better solid or stranded annealed copper conductor, , Supply and making of end termination with brass double compression gland and Aluminium or Cu lugs for 2 pair, , Supplying and installing of 50 mm width X 50 mm depth X 1.6 mm thickness size of perforated Hot, Dipped Galvanised Iron cable tray , SITC of junction box , Dismantling of Air handling unit of Modular construction with PUF insulated double wall and air flow capacity of 14000 CFM Approx. , Dismantling of MS C class piping insulated with valves and fittings, size 3 inch , Dismantling of MS C class piping insulated with valves and fittings, size 2 inch , Dismantling of GI Ducting with Insulation

CATEGORY: Supply of Desiccant molecular Sieve for Air Drying Unit, Model- MSD 1920 M , Make-Ultrafilter Type -4 Angstrom, Form-Beads, Size- 2.5-5 mm Dia, Make- Zeochem, CECA, UOP. , Supply of Ceramic Balls for Air Drying Unit, Model- MSD 1920 M, Make-Ultrafilter . , Supply of Filters for Air Drying Unit, Model-MSD 1920 M, Make-Ultrafilter, Filter Media-Sintered Bronze, Rating-10 Microns, Model-SB 20 by 30. , Supply of Filters for Air Drying Unit, Model-MSD 1920 M, Make- Ultrafilter,Filter Media- Borosilicate Fibre Glass, Rating- 0.1 Micron, Model- MF 20 by 30. , Service Charges of servicing both Air Drying Unit including replacement of Dessicants, Ceramic Balls and Pre-Filters and After- Filters. Detailed Scope of work as per Annexure-A

CATEGORY: Supply of type tested TT MCC Panel , Installation, testing and commissioning of MCC Panel , Supply of 1.1 KV grade, XLPE insulated, and overall sheathed, 3.5C x 150 Sqmm , Supply of 1.1 KV grade, XLPE insulated, and overall sheathed, 3C x 16 sqmm , Laying and fixing of one number PVC 3.5C x 150 sqmm clamped with 25 40x3mm MS flat clamp , Laying and fixing of one number PVC 3C x 16 sqmm clamped with 1mm thick saddle , Laying and fixing of one number PVC insulated 3C x 25 sqmm clamped with 1mm thick saddle , Supply of 1.1 KV grade, XLPE insulated, and overall sheathed, 12Cx1.5.sq mm control cable , Supply of 1.1 KV grade, XLPE insulated, and overall sheathed, 2 Pair Instrumentation cable , Laying and fixing of one number PVC insulated 12Cx1.5.sq mm control cable , Laying and fixing of one number PVC insulated 2 Pair Instrumentation cable , Laying of one number PVC insulated and PVC sheathed , Laying of one number additional PVC insulated , Supply of following size indoor end termination 3.5C x 150 sqmm , Supply of following size indoor end termination 3C x 25 sqmm , Supply of following size indoor end termination 3C x 16 sqmm , Making of following Size indoor end termination 3.5C x 150 sqmm , Making of following Size indoor end termination 3C x 25 sqmm , Making of following Size indoor end termination 3C x 16 sqmm , Supply of following Size indoor end termination 3C x 2.5 sqmm , Supply of following Size indoor end termination 12Cx1.5.sq mm control cable , Supply of following Size indoor end termination 2 Pair Instrumentation cable , Making of following size indoor end termination 3C x 2.5 sqmm , Making of following size indoor end termination 12Cx1.5.sq mm control cable , Making of following size indoor end termination 2 Pair Instrumentation cable , Supply of followoing size of perforated pre galvanised finish 300mm Wx50 mm D x1.6 mm T , Supply of followoing size of perforated pre galvanised finish 100mm W x50 mm Dx1.6 mm T , Supply of followoing size of perforated pre galvanised finish 50mm W x50 mm Dx1.6 mm T , Installation of followoing size of perforated pre galvanised finish 300mm Wx50 mm D x1.6 mm T , Installation of followoing size of perforated pre galvanised finish 100mm W x50 mm Dx1.6 mm T , Installation of followoing size of perforated pre galvanised finish 50mm W x50 mm Dx1.6 mm T , Supplying of 300mm Wx 50 mm D x1.6 mm T size welded pre galvanised sheet Ladder , Installation of 300mm W x 50 mm D x1.6 mm T size welded pre galvanised sheet Ladder , Supply of Earthing with maintenance free copper coated Earth rod , Installtion of Maintenance free earth pit including necessary civil works , Supply of GI Strip of 25x5mm size with accessories including GI nut, , Laying of GI Strip of 25x5mm size , Supply of Local Push Button stations , Installation testing and commissioning of Local Push Button stations , Supply of Single phase 230V, 50Hz, 1HP, DOL starter , Installation testing and commissioning of Single phase , Supply of conductivity Level Limit-Switch along with required necessary accessories, , Installation, testing and comissioning of conductivity Level Limit-Switch

CATEGORY: Customized AMC/CMC for Pre-owned Products - AMC for Cadence Analog EDA Tools; Cadence; Annual Maintenance Contract (AMC); Six-Monthly; Yes

CATEGORY: Cadence (R) Pegasus (TM) Design Rule Check P/N PGSS100 Make: M/s Cadence Design Systems (Ireland) Li , Cadence (R) Pegasus (TM) Design Review Sign-Off Option, P/N PGSS630 Make: M/s Cadence Design Systems , Cadence Pegasus Mask Rule Check, P/N PGSS420 Make: M/s Cadence Design Systems (Ireland) Limited

CATEGORY: Toner Cartridges / Ink Cartridges / Consumables for Printers (Q2)

CATEGORY: Supply of three 03 Phase 415V, , Installation, testing and commissioning of IEC61439 compliant, , Supply of 3C x 50 Sq. mm, , Laying of 3C x 50 Sq. mm, Stranded Copper Conductor, , Supply of 3.5C x 150 Sq. mm, stranded Aluminium conductor, , Laying of 3.5C x 150 Sq. mm stranded Aluminium, , Supply of 12Cx1.5.sq mm, 1.1 KV grade, , Laying and fixing of single run 12Cx1.5Sqmm PVC insulated , Supply of indoor end termination with nickel coated , Making of indoor end termination with double compression gland , Supply of indoor end termination with nickel coated SS, , Making of indoor end termination with nickel coated brass , Supply of 12Cx1.5.sq mm Size indoor end termination , Making of 12Cx1.5Sqmm size indoor end termination , Making of indoor end termination with nickel coated , Rerouting of the 4Cx240Sqmm stranded Aluminium, , Supply of 300 mm W x 50 mm D x1.6 mm T size, , Installation of 300 mm W x 50 mm D x1.6 mm T size, , Supply of 50 mm X 6 mm GI strip along with accessories G.I. nut, , Fixing 50 mm X 6 mm GI strip for earthing on surface or in recess for connections etc. , Supply of Local Push Button stations , Installation testing and commissioning of Local Push Button stations , Supply of 12 core, Multi mode, , Laying of Fiber optic cable on existing cable tray , Supply of 10-port Ethernet Managed Switch , Installation, Testing and commissioning of 10-port Ethernet Managed Switch , Supply of 10-port Ethernet unmanaged Switch , Installation and commissioning of 10-port Ethernet unmanaged Switch , Integration of all Allen bradly make VFD Drives of MCC panel