Fire Tenders

Description: Rails- 27.537 Mt-delivery On Sectional Weighment Basis. Lot No. 6436 24 09 06 Gtl Tpty-cgi R Ap. Available With Sse P W Pak Scrap Cond And U/s Released 75r,50 Bh,41 1/4r,60r,50r, And 80bh Rails Consisting Of:- 1)60r Classiii Rails -- - 45 Nos--- 132.550 Rm--- 03.945 Mts (approx) 2)50 Bh Classiii Rails--- 12 Nos--- 50.290 Rm--- 01.824 Mts (approx) 3)50r Classiii Rails -- - 102 Nos--- 318.85 Rm--- 07.908 Mts (approx) 4)41 1/4 Classiii Rails -- 84 Nos---- 229.320 Rm¿ 04.692 Mts (approx) 5)80bh Classiii Rails --- 59nos---- 139.690 Rm¿ 05.542 Mts (approx) 6)75r Classiii Rails ¿ 29 Nos---- 97.660 Rm¿ 03.626 Mts (approx) Total Qty: 27.537 Mt. Approx. Available At Km 92/17-19 (lh) At Chandragiri Yard,km 92/23-25(lh) At Chandragiri Iyard,km 92/11-13 (lh) At Tirupati Yard,km 92/17-19(lh) At Chandragiri Yard,km 92/23-25(lh) At Chandragiri Yard,km 103/39-93/17 Rh At Tirupati Yard,km 92/11-13 (lh) At Tirupati Yard,km 92/23-25(lh) At Chandragiri Yard,km 103/39-93/17 Rh Tirupati Yard,km 92/11-13 (lh) At Tirupati Yard,km 92/23-25(lh) At Chandragiri Yard,km 103/39- 93/17 Rh Tirupati Yard,km 92/11-13 (lh) Tirupati Yard,km 92/11-13 (lh) Tirupati Yard,km 92/23-25(lh) At Chandragiri Yard,km 92/25-27(rh) At Chandragiri Yard,km 103/39-93/17 Rh Tirupati Yard,km 92/11-13 (lh) Tirupati Yard,km 92/23-25(lh) At Chandragiri Yard,km 92/17-19 (lh) At Chandragiri Yard,km 92/23-25(lh) At Chandragiri Yard,km 92/23-25(lh) At Chandragiri Yard,km 92/11-13 (lh) Tirupati Yard. Ss No. G/w/gtl/r/pak/2024-25/131, Dt.03.09.24. Sl.no.01 To 20, St No. 1 To2,1,1,2,1,2,1,1,2,3,1,2,1,2,1,1,2,3,1. Hsn Code: 730210 - Gst 18%. Note To The Bidders 1) Successful Bidder Is Advised To Pay Bsv At The Earliest And Approach All The Concerned Witnessing Officials Immediately Along With Delivery Point Fixation Letter For Taking Loading To Avoid Last Minute Rush And Unforeseen Circumstances 2) Bidders May Visit The Site Of The Material For Physical Inspection Of The Material And Loading Spot Also, In All Aspects Before Bidding In E Auction.3) Post Auction No Representation Shall Be Entertained.4) For Photos Of This Lot, Kindly Click On View Lot Image On Bottom Left Side. 5) Gas/chisel Cutting Is Permitted, If Required, For Easy Loading And Transportation Purpose, Only After Ensuring Sufficient Safety Measures Against Fire Hazards Etc To Avoid Any Mishap To Any Person, Railway Material Etc. Witnessing Officials To Ensure That The Lot Is Delivered As Per Lot Description. 6) In Case Purchasers Require Usage Of Any Railway Assets/materials Such As Electricity/ Forklift Truck Etc. During The Process Of Delivery, They Are Required To Pay, The Prescribed Amount To Railways, As Directed By The Respective Custodian Of The Lot. 7) It Is The Responsibility Of The Purchaser/bidder To Return Excess Material, If Found During Gross Weighment, To The Nominated Premises Of The Custodian. 8) Clubbing Of The Lots, What So Ever, Is Not Permitted For Loading 9) Request For Fixation Of Delivery Point Should Be Invariably Raised In Ireps Online Only. Purchasers Are Requested To Make Use Of This Facility. No Representative Should Be Sent To The Office Of Sr.dmm/gtl For Collection Of Delivery Fixation Letter. As Soon As The Balance Sale Value Is Received By Railways Online, Delivery Order Will Be Issued Immediately, To Facilitate The Purchaser To Raise An Online Request For Fixation Of Delivery Point. 10 Railways Does Not Guarantee For Quality, Quantity Description Etc.

Description: 98090800 Released From Scrap M.s. Light Junk Kachra Related Scrap I.e. Coach Toilet Doors , Seat Frames , Bearth/seat Frames, Train Lighting Fittings, Side Lamps Lamp Hand Signal, Fittings, Tail Lamp Fittings, Ms /ci Signal Base Unit , Loc, Nut Bolts And Other Hardwares, Heavily Damaged And Corroded Steel Furniture Such As Locker, Cupboard, Chairs Etc. Ms Measuring Cans, Tins, Racks, Brake Dust Bin, Ms Pipe And Cut Pcs. Of Ms Pipes, Rods , Ms Bars Released From Broken Construction, Compressor Spring, Wire /coil Springs, Misc. Rubber Pieces Attached With Minor Metal, Air Brake Assly With Or Without Rubber Attachment, Broken - Damaged Pieces For Air Brake Assly, Ms Rope Wire, .rubber Attached Sandwich Assly For Emu, Air Spring Assly Plates, Damaged Ms Angles, Racks/laders Ms Brackets , Dust Bin Stand , Tin Fuse Box, Fire Extinguisher, Empty Electrical Pannel, Ms Stand, Oven, Earthing Patti, Empty Cable Tray, Fly Catcher, Wire Coil, Collapsible Doors, Shuters, Grills , Chain, Channel Grills, Compound /bridge Jali With Or Without Frame, Iron Table, Iron Cot , Book Case Doore Type, Rack, Shadowless Lamp, Pad Lock, Hyd. O.t., Foot Step, Mc Incubutor, Hematology, Centrifuge Mc, Skeltal, Boyls, Plyer Stand, Medical Care Accesories, Battery Stand, File Plat Smooth, Drill Machines, Angle Grinder, Saw Mc, Indicator Board, Welding Equpments, Five Line Signal Face Indicator, Basket , Wire Rope, Rail Dolly, Shovel Steel, Bend Pipe, Pressure Tank, Mould Cover, Goods Neck Univerasl Mounting, Pan Or Ghamela, Powrah, Bar Crow, Axe-pick, Rack Hand Balast, Torch Banners, Hyd. Rail Sensor, Mc Rail Cutting, Hand Operated Mcs, Tamping Tools, Frames,wire Mesh, G.i./ms Pipes And Tubes , Tubes And Their Cut Pcs, Junction Box, Switch Boxes, Empty Convertor, Payary (steps), Filters, Rings, Nut Bolts, U Clips, Pipe Pin, Gate M/c Dismentled, Liquid Container, , Location Boxes , Jumper Box,ground Connections , Basket Steel, Water Cane/ Material Carring Trolley,steel Baskets, Containers, Trays, Frames, Stretchers, Nets/ Jali, Halogen, Panto Pans, Compressor Spares, Dust Guard, Air Filters , Filters And Filter Covers, Ms/gi Duct And Its Parts,insulating Armature Of Signal Cable, Ci/ms Signal Base Unit, Hand Lamps, Side Lamps, Signal Lamps, Petromax, Hs Lamp, Heavily Rusted/damaged/pressed Drums Of Various Sizes And Their Cut Pcs. Partially Filled Or Coated With Grease, Paint Other Oil /chemical From Inside, Paint/varnish Tins Empty/partially Filled With Paint And Tins 5, 20 Liters And Other Drums Of Various Capacity, Hospital Misc. Items, Stretcher, Stretcher Bar, Broken Umbrella, Damaged, Cattle Guard And Its Pcs., Helmets, Hot Plate Empty Body, Clamps, Signal Post,signal Platform, Signal Base, Ms/ Gi Wire/ Coil, Jali, Funnels, Wall Protectors, Boxes, Rusted And Damaged Iron Bar Pcs Released From Broken Construction , Shadowless Lamp With Glass Atteched, Chares Steel, Revolving Chair, Electric Welding Machines, Scrap Machines, Wheels, Desmantelled Weighing Machines Parts/covers Etc. Ms Pipe With Or Without Ci Attachment, Electrodes, Broken Parts Of Brake Pad, Rubber Pad, Rubber With Or Without Ferrous Non Ferrous Attachment,bins, Plates, Rings, Spares/parts /body Of Weighing Machine , Platform Weighing Machine And Its Parts, Pressure Switches And Other Switches , Signal Parts, Location Boxes And Their Cut Parts And Other Ferrous Misc. Scrap Items With Or Without Minor Nf/ss/wooden/rubber/rexine Attachments Of Sorts And Sizes, Broken And Damaged, Pipes - Ms, Gi, Ci, Broken And Damaged, M.s. Bracket For Transformer Smaal/big,with Or Without Rubber,wood,minor N/f Attachment , St Sleepers And Other Nf Items, Damaged Chucker Plate, M.s- Door, Drain Skimmer, Alluminium Insulated Cable, With Or Without N/f Attachment. With Or Without Grease & Oil . Loading By Purchaser. (custodian: Dms/scrap/pardi). Note : Mechanised Loading Permited. Mud, Rust And All Such Remains Is Part Of Lot. Cutting Allowed.

Description: Ms Scrap - 78.300 Mts- Delivery On Actual Weightment Basis. Lot No 5405 24 09 54 Gtl Gtl Ms Ap. Available With Sse P Way Bg Gtl. Scrap. Cond. & U/s. Released Ms Scrap Consisting Of (1)(a)60kg Gj Pieces- 144nos- Adopted Weight (120kgs)-17.280mts (b)52kg Gj Pieces- 29nos-- Adopted Weight (104kgs)-3.016mts, (2)gas Cut Check Rails- 42.03metres-- Adopted Weight (42kgs)-1.765mts, (3)slide Chairs- 600nos-- Adopted Weight (19.5kgs)-11.700mts (4)(a)60kg Rail Cut Pieces- 352nos-- Adopted Weight (60.34kgs)-21.240mts, (b)52kg Rail Cut Pieces- 50nos-- Adopted Weight (51.89kgs)-2.595mts, (5)60kg Sej Cut Check Rails- 21nos-- Adopted Weight(140kgs)-2.940mts (6)52kg Sej Cut Pieces-32nos-- Adopted Weight(40kgs)-1.280mts, (7)guage Tie Plate- 20nos- Adopted Weight(80.400kgs)-1.608mts, (8)bearing Plates- 167nos-- Adopted Weight(58.500kgs)-9.770mts, (9)bolts & Nuts Off Size- 380nos-- Adopted Weight(1.195kgs)-0.454mts, (10)plate Screws- 1198nos-- Adopted Weight(0.475kgs)-0.569mts, (11)single Coil Spring Washer- 658nos-- Adopted Weight(0.056kgs)-0.087mts (12)52kg Cut Check Rail- 72nos-- Adopted Weight(42kgs)-3.024mts, (13)ms Bracket T-4181-26nos Adopted Weight(7.75kgs)-0.202mts, (14) Ms Bracket T-4182-20nos- Adopted Weight(11.875kgs)-0.238mts (15) Ms Brackets-10nos--- Adopted Weight(8kgs)-0.080mts, (16) Ms Tie Angle For Sej-14nos Adopted Weight(36kgs)-0.504mts.total Qty- 78.300 Mts. (approx). Available At Inside Sse/p.way/bg/gtl Office Compound, Guntakal . S.s. No. G/w/gtl/ms/bg-gtl/2024-25/114 Dt.02/09/2024, . Sl No 19, And St No. 16. Hsn Code: 720429/gst18%) Note To The Bidders 1) Successful Bidder Is Advised To Pay Bsv At The Earliest And Approach All The Concerned Witnessing Officials Immediately Along With Delivery Point Fixation Letter For Taking Loading To Avoid Last Minute Rush And Unforeseen Circumstances 2) Bidders May Visit The Site Of The Material For Physical Inspection Of The Material And Loading Spot Also, In All Aspects Before Bidding In E Auction.3) Post Auction No Representation Shall Be Entertained.4) For Photos Of This Lot, Kindly Click On View Lot Image On Bottom Left Side. 5) Gas/chisel Cutting Is Permitted, If Required, For Easy Loading And Transportation Purpose, Only After Ensuring Sufficient Safety Measures Against Fire Hazards Etc To Avoid Any Mishap To Any Person, Railway Material Etc. Witnessing Officials To Ensure That The Lot Is Delivered As Per Lot Description. 6) In Case Purchasers Require Usage Of Any Railway Assets/materials Such As Electricity/ Forklift Truck Etc. During The Process Of Delivery, They Are Required To Pay, The Prescribed Amount To Railways, As Directed By The Respective Custodian Of The Lot. 7) It Is The Responsibility Of The Purchaser/bidder To Return Excess Material, If Found During Gross Weighment, To The Nominated Premises Of The Custodian. 8) Clubbing Of The Lots, What So Ever, Is Not Permitted For Loading 9) Request For Fixation Of Delivery Point Should Be Invariably Raised In Ireps Online Only. Purchasers Are Requested To Make Use Of This Facility. No Representative Should Be Sent To The Office Of Sr.dmm/gtl For Collection Of Delivery Fixation Letter. As Soon As The Balance Sale Value Is Received By Railways Online, Delivery Order Will Be Issued Immediately, To Facilitate The Purchaser To Raise An Online Request For Fixation Of Delivery Point. 10 Railways Does Not Guarantee For Quality, Quantity Description Etc.

Description: Cond. And U/s Ferrous Fabricated Materials Of Ms/ci Scrap In Nature Such As Weld Mesh, Profile Cutting Machine, Band Saw W/o Motor &name Plate, Ms Duct, Anti Slip Arrangement, Earthen Bond, Galvanized (gi) Sheet, Ms Sheet Of Various Sorts And Sizes, Blower Rotary Forging, Liner, Guide Fixtures, Side Frame Fixtures, Trolley Of Various Sorts And Sizes, Trolley Wheel & Frame, Battery Fixing Iron Tray, Ms Pipe, Coach/wagon Stand, Conveyor Belt, Ferrous Body Of Auto Change Over Panel, Wire Mesh, Emu Coach Cut Parts, Ferrous Portion Of Cab Window Assembly, Sign On Iron Stand, Salary Bin, Cupboard, Structural Items, Different Type Of Packing Channels, Ms Benches, Hydralic Rail Bender,ferrous Portion Of Window Ac Plant & Water Coolers, Hand Trolley, Centrifuge For Car Body,car Body Filter, Undersling Water Tank, Sand Box, Aduppu, Flat, Trough Sheet, Coach Cut Up Parts, Ms Tank, Grill Gate, Rolling Shutter, Bench Test, Wheel With Plate, Bins, Roller Of Shutter, Regulator Empty Box, Sliding Doors, Dolley,platform Shelter, Engine Base Rail Of Demu, Collapsible Gate, Fob Fencing, Corrugated Sheets, Rectangular Square Tube &galvanised Sheets, Bogie Mounted Brake Beam With Composite Brake Blocks, Gi Sheets, Pipe 8"(ductile)inside Thin Layer Of Concrete In Full Pipe&negligible Quantity Of Rubber Beeding, Square &rectangular Tubes & Galvanised Sheets, Ms Grill Gate,grill Window &stair Case Handle,ferrous Body Of Various Types Of Motor, Angle And Channel Fabricated With Nut, Bolt,ladder,plate,grill, Barricade, Bolts, Nuts, Tray Under Frame, Trailer Frame, Frame, Empty Bin, Pipe Bending Machine, Hydraulic Extractor, Ci Pipes, Hume Pipe, Doors, Side Walls, Platform Pedestal, Light Post, Boxes, Front Load Buckets, Cut Rod, Rails Of Various Sorts And Sizes With/without Concrete/brick/mud Adhering, Enclosures, Tank In Full/cut Pieces, Battery Tray, Ladder, All Types Of Trolley Wheels With Minor Nfs Attachments, Screens, Channel Post, Sheets, Stand, Track Machine Cut Up Parts, Ms Pipes Covered With Or Without Rope &with Or Without Parts Of Rubber, Dome, Vrla Rack, Vcb In Dismantled Condition, Vrla Battery Box & Clamp, Stand, Dtmf Way Station Equipment Box, Led Line Display Board, Hydraulic Lifting Table With Available Fittings, Vrla Battery Empty Container, Bed/base Plate, Fabricated Cut Rods,gi Pipes, Angle, Plate, Platform Bench, Spring Plank, Clamps, Cabinet, Ms Grill, Sheets, Ladder, Steel Gate, Trolley,ms Water Tank, Fire Tender Tank,roof Truss Supporting Columns,purlins, Sand Box, Fencing, Tl Rod, Vcb Panel, Train Display Board, Battery Stand, Boards, Tools Box, Empty Regulator &empty Battery Container, Cut Rod, Ticket Punching Cut Parts, Hand Rail, Fabricated Post/pipe/rod, Strips, Hoods, Impellor, Base Plates, Meshes, Battery Box Frame, Grs Box, Control Panel, Fan Down Rod, Ac Window Covers ,angle / Channels With/without Rails, Angle Of Tld, Rack, S&t Panels, Main Switch Panel Board W/o Nfs Attachments, Ebc & Rbc Frame &enclosure,emu Sliding Door, High Beam, Silencer, , Garden Light Post, Tap Changer Cover With Fiber Attachments, Empty Battery Container, Stretcher, Cupboard, Dust Bin, Iron Step, Empty Rotary Junction Box, Empty Regulator Box, Iron Metal Box, Garden Light Post, Stand, Mdb W/o Non Ferrous Attachments, St Light Tubular Post, Gi/ms Window, Luggage Rack, Cut Pieces Of Angles & Channels, Channel, Ms Pipe, Fabricated Rod & Ferrous Nature Items(item To Be Segregated), Casnub Bogie Side Frame, Bed Portion Of Weighing Scale L With Or Without Any Minor Non-ferrous Attachments And All Other Scrap Excluding Ms Hand Hold In Fabricated Nature Of Sorts And Sizes Full/broken With/without Other Fs/ci/gi Fittings In As Is Where Is Condition.pl No 98050126. Note:(1) Cutting Is Permitted To Loadable Size And For Heavy Nature Items Only. 2) During Delivery If Any Major Non Ferrous Items Found The Same May Be Handed Over To Custodian. 3) Crane/jcb Loading Permitted.

Description: CATEGORY: 14 4320 000007 43 4320 00007 WASHER THRUST WASHER THRUST OLITE Drg No IMPD 1144 A Spec No CQAE 4320 1327 d , 43 5305 015936 SCREW CH HD 4 point 75 MM 3 16 BSW 11MM LONG , 43 4320 000014 GLAND TOP BOTTOM PACKLESS Drg No IMPD 1151 D Spec No CQAE 4320 1327 d , W1 4320 000025 43 4320 000025 CAP SPIGOT TERMINAL Drg No IMPD 1162 B Spec No CQAE 4320 1327 d , 43 4320 000022 BUSH OILITE BOTTOM Drg No IMPD 1159B IMGA 0092 H and ccnnected drgs Spec No CQAE 4320 1327 d , X3 IXC GL SK 1477 TOMMY BAR 9 point 5 X 125MM LONG STEEL ST 58 , X3 IXC GL 500 4055 18 X3 4320 000414 STARTING ROPE 7 point 5X1150MM LONG NYLON CORD , X3 IXC GL SK 2241 X3 IXC GL SK 2211 SPANNER TUBULAR 17 AF 115 MM LONG , X3 3020 001210 INSERT FLEXIBLE COUPLING , 4930000458 SK 6946 X3 IXC GL SK 6946 GUN GREASE PUSH TYPE CAPACITY 150 CC , 43 4320 000028 WASHER LEATHER Drg No IMPD 1165 Spec No CQAE 4320 1392 e , W1 4320 000893 43 4320 000893 SPANNER FOR SPINDLE NUT , 5315000191 X3 5315 005791 PIN COTTER SPLIT 3 point 2MM DIA X 25MM LONG , 43 3040 000027 TERMINAL SPIGOT FOR 22 MM Drg No IMPD 0970 D Spec No CQAE 3040 1479 b , 43 4320 000028 TERMINAL SOCKET FOR 22MM Drg No IMPD 0972 A Spec No CQAE 3040 1479 b , 43 3040 000014 SHAFT ASSEMBLY FLEXIBLE 22X2440MM 8 FT Drg No IMSA 0161 E and connected drawings Spec No CQAE 3040 1479 b , 43 3040 000008 SHAFT ASSEMBLY FLEXIBLE 17 point 5MM X 7320MM 24FT Drg No IMSA 0161 E and connected drawings Spec No CQAE 3040 1478 b , 43 3040 000006 SHAFT ASSEMBLY FLEXIBLE 17 point 5MM X 2440MM 8 FT Drg No IMSA 0161 E and connected drawings Spec No CQAE 3040 1478 b , WA 6645 43 WA 6645 EXTRACTOR FDE BALL BEARING OUTER Drg No IMSA 0163 A , LV MT7 3110 000111 LV6 MT7 3110 000111 BEARING BALL SKF 6205 Spec No CQAE 4320 1392 e , W1 4820 008739 43 4820 003739 VALVE STOP LIFT CHECK 50 point 8 2 INCH FULL WAY Drg No IMSA 0431 IM 0625 A and connected drawings , 4730005837 43 4730 005837 STAINER SUCTION HOSE FRAME TYPE Drg No IM 0624 , W1 4720 000114 43 4720 000114 NOZZLE BRANCH PIPE FIRE HOSE 31 point 75MM 11 by 4 IN Drg No lM 0256 D connected drawings , W1 4320 000887 43 4320 000887 BRANCH PIPE 50 point 8MM 2 Inch Drg No lM 0256 D connected drawings , 43 4730 005838 ADOPTOR STRAIGHT PIPE TO HOSE ROD ANTI TWISTER , 5140000145 X3 5140 000145 TOOL BOX PRTABE SIZE 257 X 115 X 300 MM HEIGHT X 1MM THICK , 43 3040 000007 SHAFT ASSEMBLY FLEXIBLE 17 point 5X4880MM 16 FT , 43 4320 000003 Pump Water Centrifugal 38 pt 1mm 10920 LPH 15 pt 2M Head 1 1 by 2 in 2400 GPH 50ft Head Flexible Shaft Driven Drg No IMGA 0092 G IMGA 0092 H Spec No CQAE 4320 1327 d , 5310015548 X3 5310 015548 NUT PLAIN HEXAGON STEEL 5.5M 16X1 point 5 ZINC PLATED , 432000026 43 4320 000026 NUT COUPLING CASING END Drg No IMGA 0092 H IMPD 1163 A and connected drgs Spec No CQAE 4320 1327 d , 4320 00027 43 4320 000027 NIPPLE COUPLING CASING END Drg No IMPD1164 A , 5340009268 X3 5340 009268 MOUNT RESILIENT DUNLOP 31 406 1 MN 40 , W1 WA 1534 HOSE UNION FEMALE 2 IN BSP Spec No IND GS 1201IND TC 2462 e , 43 2815 004330 ASSEMBLY PACKING BOX Drg No IMSA 0309

Description: Points And Crossing Rails-52.550 Mt-delivery On Actual Weighment Basis. Lot No. 5405 24 10 31 Gtl Gtl-tim P And C Ap. Available With Sse P Way Bg Gtl Scrap Cond. And U/s Released Points And Crossing Rails Consisting Of 1) Tongue Rail 60 Kg 1 In 12(12.37 Mtrs) ¿ 3 Nos-600kgs-1.800mt. 2) Tongue Rail 60 Kg 1 In 12 ¿ 12.500mtrs-3 Nos-611 Kgs-1.833mts. 3) Tongue Rail 60 Kg 1 In 8.5 ¿ 7.65 Mtrs-04 Nos-500kgs-02.000mts. 4) Tongue Rail 60 Kg 1 In 8.5-11.74 Mtrs-02 Nos-621kgs-1.242mts. 5) Tongue Rail 60 Kg 1 In 8.5-11.07 Mtrs-01 Nos-615kgs-0.615mts. 6) Tongue Rail 60 Kg 1 In 8.5-12.10 Mtrs-02 Nos-640kgs-1.242mts. 7) Tongue Rail 52 Kg 1 In 8.5-11.80 Mtrs-01 Nos-534kgs-0.534mts. 8) Tongue Rail 52kg 1 In 8.5-11.91 Mtrs-1 Nos-540 Kgs-0.540mts. 9) Tongue Rails Of Cutting Pieces Of Different Sizes Of Weight ¿ 11046 Kgs-11.046mts. 10) Check Rail 60 Kg -4.34 Mtrs-11 Nos¿241kgs-2.651mts. 11). Tongue Rails 52 Kg 1 In 8.5-11.90 Mtrs-02 Nos-510 Kgs-1.020mts. 12). Tongue Rails 60 Kg 1 In 12-12.36 Mtrs-1 Nos-600 Kgs-0.600mts. 13) Tongue Rails 60 Kg 1 In 16-12.90 Mtrs-04 Nos-650 Kgs-2.600mts. 14) Tongue Rails 60 Kg 1 In 12-12.50 Mtrs-02 Nos-610 Kgs-1.220mts. 15). Check Rails 60 Kg ¿ 4.34mtrs-04 Nos ¿ 241kgs-0.964mts. 16) Tongue Rails 60 Kg 1 In 8.5-11.80 Mtrs-06 Nos-621 Kgs-3.726mts. 17) Check Rail 60 Kg ¿ 4.340mtrs-03 Nos 241 Kgs-0.723mts. 18) Check Rails 52 Kg ¿ 4.340 Mtrs-12 Nos-212 Kgs-2.544mts. 19) Check Rail 60 Kg ¿ 4.34mtrs-28 Nos-241kgs-6.748mts. 20) Check Rail 60 Kg ¿ 4.340mtrs-24 Nos-241kgs-5.784mts. 21) 1 In 12 Head Treated Welding Crossing ¿ 4 Nos-770kgs-3.080mts. Total Qty:118 Nos-52.550mt Mt. Approx. Available At Km Tim/fci1-fci 2 Near Auto Stand, Km 438/34-439/02 Dn Line And Inside Of The Office Compound, In Front Of New Rpf Barracks, Km 443/39-41 Near Lc 183, Km 443/53-54a Near Pt No. 90a, Km 364/24-26, Inside To The Office Compound, Km Ts/17-ts/16, Guntakal . S S No G W Gtl P And C /bg-gtl/24-25/153, Dt. 17.10.24. Sl No 1-21, And St No. 1 To 13. Hsn Code: 730210 - Gst 18%. Note To The Bidders 1) Bidders May Visit The Site Of The Material For Physical Inspection Of The Material And Loading Spot Also, In All Aspects Before Bidding In E Auction.2) Post Auction No Representation Shall Be Entertained.3) For Photos Of This Lot, Kindly Click On View Lot Image On Bottom Left Side.4) Gas/chisel Cutting Is Permitted ,if Required, For Easy Loading And Transportation Purpose, Only After Ensuring Sufficient Safety Measures Against Fire Hazards Etc To Avoid Any Mishap To Any Person, Railway Material Etc. Witnessing Officials To Ensure That The Lot Is Delivered As Per Lot Description 5) In Case Purchasers Require Usage Of Any Railway Assets/materials Such As Electricity/ Forklift Truck Etc. During The Process Of Delivery, They Are Required To Pay, The Prescribed Amount To Railways, As Directed By The Respective Custodian Of The Lot. 6) It Is The Responsibility Of The Purchaser/bidder To Return Excess Material, If Found During Gross Weighment, To The Nominated Premises Of The Custodian. 7)clubbing Of The Lots, What So Ever, Is Not Permitted For Loading 8) Request For Fixation Of Delivery Point Should Be Invariably Raised In Ireps Online Only. Purchasers Are Requested To Make Use Of This Facility. No Representative Should Be Sent To The Office Of Sr.dmm/gtl For Collection Of Delivery Fixation Letter. As Soon As The Balance Sale Value Is Received By Railways Online, Delivery Order Will Be Issued Immediately, To Facilitate The Purchaser To Raise An Online Request For Fixation Of Delivery Point. 9) Railways Does Not Guarantee For Quality ,quantity Description Etc.

Details: :seats For Lhb Non Ac Chair Car Coaches (108 Seater). Follow Cushioning Ma Terial Either Pu Foam To Rdso Spec. Rdso/2007/cg-04 Rev. 01 Or Silicon Foam To Rdso Spec . Rdso/2013/cg-13 Rev. 01 With Fire Properties Compliant To R21 Hl-3 Of En45545 Standard And Upholstery To Rdso Spec. Rdso/2008/cg-07 Rev-nil With Amendment Slip No-5 And Cor Rigendum 1 Of May 2015, As Per Drawing: Mdts-219 Rev.03 With Corrigendum No.1 Issued Vid E Letter No Md35131 Dt.31/01/22, Packing Instruction: Chair Car Seat( Ac & Nac ) : I. All Protr Uding Portions Of The Chair Car Seat Should Be Protected With Plastic Cover. 2.then Co Mplete Seat And Its Corners / Hand Rest/ Foot Rest Should Be Properly Wrapped With Bio Degradable Air Bubble Sheet Of Thickness 30 Micron And Bubble Diameter 10mm. 3. The Fu Ll Seat Should Be Further Wrapped With 3 Ply Corrugated Paper Sheet. 4. Each Individual Chair Should Be Covered All Around With Transparent, Plain, Biodegradable, Polythene Sheet To Prevent Ingress Of Dust/water. 5. The Seat Bottom Frame Portion Sh Ould Be Fitted With M.s Supports For Its Balancing, So That The Chair Can Rest On The Fl Oor Without Tilting On Any Side. 6. The Overall Packing Should Be Such That It Is Not Da Maged During Transportation Of The Material, The Seats Should Be Tied Up In Pairs Only. 7. All Hardware/accessories/loose Items In One Coach Set Should Be Separately Packed I N Wooden Box Having Sufficient Strength. 8. A List Should Be Pasted On Each Box Showi Ng Purchase Order No., Pl No., Description Of Item, Drg. No., Quantity, Firm Name, Addres S & Date Of Dispatch And Its Contents. Note : Qr Code Is To Be Affixed " Near Manufactur Er Name Plate On Each Seat " On Top Of Packed Seat As Per Pi Mentioned Above " On Top O F Wooden Box For Sr.no.7 Qr Code Having Details As Listed Below : 1 Name Of The Manufa Cturer 2 Purchase Order Number 3 Purchase Order Date 4 Unique Serial Number (or Lot Number For Bulk Items) Of The Manufacturer O R 5 Date Of Manufacture 6 Delivery Challan No. 7 Delivery Challan Date The Qr Code Shall Be As Per Iso/iec18004 Model2 And The Data Shall Be Available As Xml Using The Tags Detailed Above. Incase The Above Deta Ils Are Not Available, Or The Qr Codes Are Not Readable, The Supplied Material Is Liable To Be Rejected. [ Warranty Period: 84 Months After The Date Of Delivery ] ]

Description: BOQ ITEMS: Procurement of D Type rubber Fender (85X70mm) as per scope of work TA, Procurement of Fire extinguisher 5kg CO2 as per scope of work TA, Procurement of Dog Hatch Polished AISI SS 316 cast Stainless Steel 3-3/8 inch X 2-5/8 inch Cut-Out, Stainless Rectangular T-Handle as per scope of work TA, Procurement of SS 316 Gas spring for hatch cover cum door along with end fitting Size Open 380 mm, closed 240 mm, stroke 140 mm, end fitting SS 316 of 10 mm as per scope of work TA, Procurement of Hinges for hatch cover Polished AISI SS 316 Size- 160 mm length X 60mm Width, hole size- 8mm,Thickness-4mm as per scope of work TA, Procurement of Battery box latch 85mm X 25mm as per scope of work TA, Title 10 Rubber gasket , Procurement of Rubber gasket 35X50mm as per scope of work TA, Title 11 Rubber gasket , Procurement of Rubber gasket 12X50mm as per scope of work TA, Title 12 Rubber gasket , Procurement of Rubber gasket 10X50mm as per scope of work TA, Procurement of Deck filter 11/2 inch (Chromium plated filler cap Fuel for 38mm hose connection, with chain & pull ring, cover 85mm with key) Osculati make Code-20.366.24 reputed make as per scope of work TA, Procurement of 3/8 inch Ball valve Brass ISO 228/1-G as per scope of work TA, Procurement of 3/8 inch Hose nipple Brass Art 1004 as per scope of work TA, Procurement of 1 1/2 inch Non return valve Brass ISO 228/1-G (Valve swing check 1-1/2 inch) as per scope of work TA, Procurement of 2 inch Ball Valve Brass ISO 228/1-G as per scope of work TA, Procurement of 2 inch Male adapter Brass Art 0280 as per scope of work TA, Procurement of Hose nipple for DG fuel line (M 3/8 inchx 10mm) Brass ISO 228/1-G as per scope of work TA, Procurement of Hose nipple for DG water cooling line (M 3/4 inch) Brass ISO 228/1-G as per scope of work TA, Procurement of 1 inch pipe (Hose Fresh/Grey water ID 25 mm) as per scope of work TA, Procurement of 2 1/2 inch Rubber hose pipe (Hose exhaust ID 65 mm) as per scope of work TA, Procurement of VETUS exhaust hose ID 152 mm 6inch R2 certified as per scope of work TA, Procurement of SS hose clamp 11/2inch as per scope of work TA, Procurement of SS hose clamp 11/4 inch as per scope of work TA, Procurement of SS hose clamp 1 inch as per scope of work TA, Procurement of SS M8x75 CSK head bolt as per scope of work TA, Procurement of SS M8x25 hex bolt as per scope of work TA, Procurement of SS M8x65 hex bolt as per scope of work TA, Procurement of SS M8x65 Machine screw as per scope of work TA, Procurement of SS M10x25 hex bolt as per scope of work TA, Procurement of SS M10x65 hex bolt as per scope of work TA, Procurement of SS M12x75 hex bolt as per scope of work TA, Procurement of SS M16x75 hex bolt as per scope of work TA, Procurement of SS M16x125 hex bolt as per scope of work TA, Procurement of SS M6x25 Csk M/c screw as per scope of work TA, Procurement of SS M6x25 hex bolt as per scope of work TA, Procurement of SS M6x80 hex bolt as per scope of work TA, Procurement of SS M6x65 hex bolt as per scope of work TA, Procurement of SS M6x100 hex bolt as per scope of work TA, Procurement of SS M5x65 hex bolt as per scope of work TA, Procurement of SS M5x25 M/c screw as per scope of work TA, Procurement of SS No.8x25 pan head screw as per scope of work TA, Procurement of SS No.8x25 CSK screw as per scope of work TA, Procurement of SS No.8x12 pan head screw as per scope of work TA, Procurement of SS No.6x12 pan head screw as per scope of work TA, Procurement of SS No.8x16 pan head screw as per scope of work TA, Procurement of SS M8 Nylock nutas per scope of work TA, Procurement of SS M10 Nylock nutas per scope of work TA, Procurement of SS M12 Nylock nut as per scope of work TA, Procurement of SS M6 Dome nut as per scope of work TA, Procurement of SS M5 Nylock nut as per scope of work TA, Procurement of PU Sealant White Multifunctional adhesive sealant for marine applications Highly elastic Sika /Reputed make as per scope of work TA, Procurement of Boat cover with double tarpaulin (14 m x 3 m x 3m) as per annexure A as per scope of work TA, Procurement of Canvas bag for coir fender tarpaulin (size dia 1200mm, length 1200mm) as per scope of work TA

Details: In East (Varachha) Zone-A area (1) T.P. Scheme No. 34 (Magob-Dumbhal), F.Plot No. 54 at Magob Health Center, (2) T.P. Scheme No. 11 (Pune), F.Plot No. 99/A at Pune Health Center and (3) E.V.M. Storage at Central Store, fire safety work including fire alarm system and sprinkler system has been done as per the prevailing norms for fire safety, in which only the work of obtaining fire NOC. is concerned.

Purchaser Name: Fire Services Department | CATEGORY: Bee Protective Suit Dress (Q3)