Fire Tenders

Description: Ubl/gsd/0081/fire Extinguisher/24/k [pl No.98417216] Condemned And Un-serviceable Fire Extinguisher Scrap Consisting Of Different Types Of Dcp,abc Types, Fire Extinguisher-235 Nos With /with Out Ms/nfs. Steel, Attachment, Available Under The Custody Of Cdms/rs Ward/gsd/ubl. Note: Bidder Has To Physically Inspect The Lot Before Bidding. Location:- Road No 2, Gsd/ubl Rs Ward Godown Bin No- 0081. Remarks-. Delivery Should Be Start From One End. No Pick And Choose Allowed.

Description: Ubl/gsd/0257/motors/25/c [pl No.98411214] Condemned And Un- Serviceable Motors Scarp Consisting Of A)welding Machine Scrap.1) Welding Plant Oil Transformer 500/400 Amps-02nos. 2) Inverter Based Mig/mag Synergic Welding Set 400/450 Amps-03nos. 3) Thyristorised Welding Plant Co2,400amps-03 Nos. 4)welding Plant Thyristorised Rectifier Dc 400 Amps-02 Nos B)old Portable Dg Set 2kva-04 Nosc) Condemned Mobile Fire Fighting Pump Petrol Engine Pump-01 Nos. D)welding Generator/machine -02nos. All Above Machine With/without Ms/nfs Attachment. Available Under The Custody Of Cdms/rs Ward/gsd/ubl. Note: Bidder Has To Physically Inspect The Lot Before Bidding. Location: Road No 02 Gsd/ubl Bin No- 257.remarks-. Delivery Should Be Start From One End. No Pick And Choose Allowed.

Description: CATEGORY: Portable Fire Extinguishers (V2) as per IS 15683:2018 (Q2)

Description: Ec Com Stp Ii Igr Office Electrical Fire Fighting Hvac 2025 26 39

Description: CATEGORY: Arduino Uno or equivalent , Arduino Nano or equivalent , Arduino Mega or equivalent , Raspberry Pi 3 Model B Plus , Breadboards and Mini Breadboard , General Purpose solderable Board , Berg Strips , 16x2 LCD display , USB Cables , Battery , Resistor Kit , Capacitor Kit , Linear Voltage Regulator , Water Pump module , Piezoelectric Plate , 8 by 8 LED Matrix Module , Bluetooth module , 7 Segment Led Display , GSM , GPS , Laser Diode Emitter , LDR Module , Keypad , JoyStick , Active Buzzer , Motor driver Module , Sound Playback Module , DC Plastic Gear motor with wheel , Node MCU , WeMos D1 R2 , Vibrating Motor , Alligator Connectors , Battery clips with DC Jack , Hook-up Wires , Jumper Cable , RGB LEDs , LEDs Red , LEDs Green , LEDs Blue , LEDs Yellow , LEDs White , Timer IC LM 555 , Atmega16u2 , Diodes and Transistors Kit , Button Switch Set , Capacitative touch Module , Capacitative Touch Switch Module , IR Sensors, Obstacle avoider sensor module , Triple Axis Magnetometer , Humidity Sensor , MQ Series , IR transmitter or receiver , Ultrasonic Sensor Module HC SR 04 or compatible , Triple Axis accelerometer , PIR Motion Detector Module , Pulse Rate Heart Sensor , Relay Module , Big Sound microphone module , Soil Moisture Sensor module , Touch Sensor , Metal Touch Sensor Module , Rain Drop Sensor , Flex Sensor , Temperature Sensor , Temperature and humidity sensor module , Force Pressure Sensor , Colour Recognition Sensor , Water Flow Sensor , Sound Sensor , IR Sensors Array module for Line Following , Power Bank , RFID Reader Tags , RF Modules Tx and Rx 315 MHz ASK , Stepper motor with Driver board , DC motor , Servo motors , 150 RPM BO Motor , L298P Motor Driver , Servo Motor Tester , Robotics DIY Kit , Mechanical Modular Construction kit , Drone Kit , Aerospace Kit , Automobile Kit , Bio Medical Kit , Agri Tech Kit , Water Sanitation Kit , Bio Tech Kit , Other Potential STEM Application Kit , 3D Printer Kit and tools , Dedicated UPS or Power back up , Filament for 3D printer , Filament Storage Box , Set of Arts and Crafts Accessories e.g. stationary items , Hacksaw Frame , Hacksaw blades , Mini Hacksaw Frame , Mini Hacksaw blades , Pliers 4.5 inch size , Tweezer Set , Ball Pein Hammer , Steel Shaft Claw Hammer , C Clamp , Allen Key Set , Drill Machine Set , Drilling Workstation , Spanner Set , Vice Normal , Precision Screw Driver Set , Wrench , Wire Strippers , Screwdriver , Cordless Rotary Multitool Set , Air Blower , Drill Bit Set , File set , Mini File set , Flexible Cutting Mat , Plastic Storage Drawer or Organiser , Pegboard , Hot glue gun , Digital Oscilloscope , Soldering Kit , Adapters , Electric Screw Driver Set , Dual Temperature Heat Gun , Soldering Helping hand , Return measuring tape , Stainless Steel Rule , Digital Vernier Calliper , Spirit Level , Digital Pen electric Tester , Digital Multi Meter , DIY Paper Microscope , Telescope , Sewing Kit , Glue Sticks , Nuts and Bolts and screw , Cable Tie , Sand Paper , Power Strip Adaptors , Bulb Holders , Electric Wires , USB TO DC jack cable , First Aid Kit , Fire extinguisher handy units , Safety goggles with or without LED torch , Safety Gloves Pairs , Safety Mask

Description: Fms Loco / Non Loco Structural Items ( Partly Mix With Rusted) Such As Different Types Of Bin, Frame Structures, Fencing Grill, Covered Bin Box, Hospital Bed, Shutter, Fan Stand, And Other Similar Items Etc. With Minor Other Attachments. Wt Is In Approx. Gas Cutting Is Allowed For Loading Purpose Only Subjected To Following Conditions: Purchaser Should Ensure That Availability Of All Fire Extinguisher, Sand , Water Bucket Etc At Delivery Point. Witnessing Staff Should Be Present While Gas Cutting Is In Progress. Gas Cutting Should Be Done On Concrete Floor. If Any Non Similar Materials Is Found Will Be Separated And Segregated Which Is Ensured By Witnessing Staff And Same Will Not Be Delivered To The Purchaser. Note: The Delivery Should Be Completely Done From Bin No. 08 Along Platform 02, Then Go For The Left Side Of The Delivery Gate. Remark:- Photograph Available On Ireps.

Description: Fire Detection Equipments Along With Connector In Sb2

Description: CATEGORY: Portable Fire Extinguishers (V2) as per IS 15683:2018 (Q2)

Description: Supply Of Gi And Ms Fittings For Regular And Breakdown Maintenance Of The Equipment In Fire Protection System

Details: Carrying Out Various Miscellaneous Civil Works Of Fire Fighting Section, 210 Mw At Btps, Deepnagar.