Fire Tenders

Description: CATEGORY: Z6 R72 172-74-303-5 OR 273003510169 INSTRUCTION PLATE , Z6 R72 165-30-10SB 1 SHOCK ABSORBER , Z6 R72 5340-176220 BAND RETAINING DRG NO 432-24-064-1 , Z6 R72 MISC-GOST-6402-70 H-1012 WASHER 4.65G.06 , Z6 R72 5999-006714 CONTACTOR TKD -501-DOD , Z6 R72 1290-000682 OH SWITCH BOARD FIRE CONTROLE 902A , LV1 R72 175-70-024SB FAN , LV1 R72 GB-301-380- 2600MSB SHAFT FLEXIBLE MODEL GB-301-M-01 , LV1 R72 432-17-009-1 DRUM OUTER , LV1 R72 172-32-610 SHIELD REAR MIDDLE , LV1 R72 165-35-108 OR 165-35-108A WING NUT , LV1 R72 172-15-021SB-2 BRACKET , LV1 R72 175-37- 007SB-1 SWITCH ELECTRIC SMOKE GENERATING EQPT , LV1 R72 520-10-009-03 GASKET , LV1 R72 176-34-023 PACKING SHEET , LV1 R72 172-62-123 SPRING , LV1 R72 GOST 9650- 80 6-6D11X22 SPINDLE 6-6D11X22.38XC.2.35.5.45-5TS6XP , LV1 R72 172-31-129 GASKET , LV1 R72 432-40-199-1 GASKET , LV1 R72 432-40-089-1 GASKET , LV1 R72 5306- 056776 BOLT M6 X 16 DRG NO 520-01-008-03 , N1 R72 3040-023428 1 UPPER HOUSING ROTARY CONVEYR MANULDRIVE , LV1 R72 172-66-040-1 COUPLING , N1 R72 1015-004040 COVER FOR RAMMER , LV1 R72 ETU 500 40 BEARING 941 15 , LV1 R72 175.56.009SB NECK , Z6 R72 5930-028720 BUTTON 172-74-330 , N1 R72 5330-008526 GASKET FOR CARTRIDGE BASE DISPOSAL MECH DRG NO 165-17-205 , LV1 R72 5315050953 PIN HINGE DRG NO 172- 02-067-1 , N1 R72 5315-008523 PIN 4U8X18 OST-3-2234-80 , LV1 R72 175.04.045A STRAP , LV1 R72 GOST 17473-80 SCREW BM5X30-46-016 , LV1 R72 TU32-TSTBP-04-89 SEAL 10 6,5 , N1 R72 1015-004216 OR 1015-004130 GUIDE POST 1250 172-25-095 , LV1 R72 54-101-77SB A BOX , LV1 R72 172-62-038-2 LEAVER RIGHT HAND , LV1 R72 172-62-115-1 BUSHING , LV1 R72 432-95-333SB-1 APPLC PRESSING BUSG OF FINALDRIVECARRIER , LV1 R72 9GB-330-026 RMS 339 HAND WHEEL KNOB , LV1 R72 172-32-634 CAP , LV1 R72 5305099876 SCREW, BM4-6GX8.46.016 , Z6 R72 RSG-10M- 030 BOLT , LV1 R72 172-65-077 SUPPORT

Description: 14 Coaches--lot No 5624105026 At Crs/tpty Scrap Depot, Ap [andhra Pradesh] Available With Cdms/sd/crs/tpty Scrap Depot.desc: Cond.& U/s 8 Wheeler Bg Coaches, Memu Trailer Coaches Without Bogie Complete, Wheel Sets And Rc Items. Coach Nos (1)ys 410033 (2)scwgaccn 997102 (3)scwgaccn 007129 (4)scwgaccn 007113 (5)wgscn 017285 (6)wgscn 017323 (7)wgscn 017283 (8)sc Gs 017478 (9)ys410044 (10)ys410039 (11)wgscz 017619 (12)wgscn 007263 (13)sc Gs 007403 (14)sc Gs 007472. Make:icf/rcf. Net Saleable Weight : 318.4169 Mts Approx.(including Ms Items Weight : 291.84919 Mts Approx. ; App Wt. Of Rexine, Foam, Pvc, Compreg Wood/sheets & Limpet Sheets: 15.87 Mts Approx.; App Wt Of S.s Lavatory Pans: 1.11 Mts Approx.; App Wt Of S.s Under Slung Tanks :1.65 Mts Approx.; App Wt Of Aluminium Hat Racks : 0.0348 Mts Approx.; App Wt Of Aluminium Window Filments With Pipe : 0.0792 Mts Approx. ; App Wt Of Aluminium : 0.88 Mts Approx.; App Wt Of Aluminium Beadings : 0.28 Mts Approx.; App Wt Of Aluminium Hydraulic Doors : 0.06 Mts Approx.; App Wt Of Aluminium Window Frames With Sill Plates Big: 0.73 Mts Approx.; App Wt Of Aluminium Window Frames With Sill Plates Small: 0.098 Mts Approx.; App Wt Of Aluminium Vention Shutters: 0.021 Mts Approx.; App Wt Of Uic Rubber :1.8 Mts Approx.; App Wt Of Aluminium Chequered Sheets: 0.94 Mts Approx.; App Wt Of Pvc Copper Cables: 1.3075 Mts Approx.; App. Wt. Of Al. Ac Roof Vents: 0.03008 Mts Approx.; App. Wt. Of Al. Bcb Patches: 0.01008 Mts Approx.; App Wt. Of Rubber, Woods, Wooden Seats With Back Rest, Fibre Shutter, Window Glasses: 0.617 Mts Approx.; App. Wt. Of Roof Alu. Weight:1.05 Mts Approx.). Note:-(1) Cutting Is Permitted To Loadable Sizes.(2)rc Items Mentioned In The Excluded/reclaimed Items List To Be Returned To Railways. The Quantity Of Rc Items Mentioned Below Will Be Arrived As Per The Joint Handing Over Memo Issued By The Railway Authorities To The Successful Bidder At The Time Of Cutting/handing Over Of The Lot And The Same List Of Rc Items Should Be Returned To Railways By The Purchaser.(3)railways Does Not Guarantee For Quality, Quantity, Description, Etc. Purchasers Are Advised To Physically Inspect The Lot And Satisfy Themselves Before Bidding As No Communication/complaints Will Be Entertained Under Any Circumstances Regarding Shortage Of Material. (4)any Non-ferrous Items, Electrical Items, Rc Items Found In Excess To The List Mentioned Below & Not Appearing In The List Of Saleable Items To Be Returned To Railways.(5)successful Bidders Must Ensure The Rc Items At The Time Of Taking Over And Same Should Be Returned To Custodian Before Effecting Delivery. In Case If Item Cannot Be Seen/count/weigh Before Dismantling, Then The Same Will Be Jointly Inspected Soon After Dismantling For Inclusion In Joint Collection List Of Rc Items.(6) The Purchaser Is Responsible For Providing Adequate Safety Firefighting Equipment Such As Fire Extinguishers Etc., On The Spot At The Time Of Cutting And Delivery. (7)free Delivery Period(fdp) For The Lot Is 60 Days. (8)in Addition To The Above, Purchasers Must Comply With The Special Conditions Mentioned Below. Location: Line No.03 Of Mrs Cutting Yard. Delivery On Number Basis Only.total Qty 14 Numbers.pl No 98111048(01) Hsn Code:72042990. Gst @18% On Forward Charge Basis.

Description: Scrap And Unserviceable Condemned Mix M.s. Coach Cutting Items Such As Body Side Door M.s., P.o.h. Coaches Realised Corroded Pieces,air Brake,clamp,pipe Pin,m.s. Door Of Battery Box ,m.s.ventilation Door,foot Plate,ice Box,m.s. Spring,m.s. Angle,and M.s. Lader With Rubber Coating,coach Cuttings, Coach Doors , Seat Frames , Bearth/seat Frames, Light Head Stock Cuttings, Train Lighting Fittings, Train Lighting Fittings, Side Lamps Lamp Hand Signal, Fittings, Tail Lamp Fittings, Cft/tl Light Fittings, Ictp/ Icfp Empty Swich Boxes Tail Lamps, Tube Light Fittings, Tube Light Jali, Fan Blades, Fan Jali, Fan Guards Fan Ribs, Fan Rings, Empty Power Pannels, Signal Platform, Destination Board, Valley Board, Letter Board,ms Signal Base, Loc, Inercooler, Nut Bolts And Other Hardwares, M S Furniture. Ms Measuring Cans, Tins, Racks, Break Pipes, Silencer Of Tower Wagon, Dust Bin, Ms Pipe And Cut Pcs. Of Ms Pipes, Rods, Ms Bars Released From Broken Constructin, Compressor Spring, Wire /coil Springs, Ms Rope Wire, Pcs. Of Brake Beam Pipes, Stands, M S Ferrous Light Junk Kachra Related Scrap I.e Ms Angles, Chanels, Flats Pcs. Of Cable Racks/laders Ms Brackets , Dust Bin Stand , Tin Fuse Box, Fire Extinguisher, Empty Glow Sign Boards, Empty Electrical Pannel, Ms Stand, Oven, Earthing Patti, Empty Cable Tray, Fly Catcher, Galvanized Patra /sheet And Their Cut Offs , Plain/corrugated / Toughened Sheets And Its Cut Pcs. Such As Strips, Patties, Patties, Patra, Rings, Coils, Boxes, Ms Brake Control Cover, Patra, Angle, Small Springs, Pins, Wire Coil, Collapsible Doors And Shutters And Their Parts/ Cut Offs, Grills , Channel Grills, Compound /bridge Jali With Or Without Frame, Ms Fencing And Their Parts, Fencing Patties, Angle Pcs., Frames,wire Mesh, G.i./ms Pipes And Tubes , Tubes And Their Cut Pcs, Damaged Gi/ Ms Pipes/rods/tubes And Their Pcs. , Ms/galvanised Boxes, Junction Box, Switch Boxes, Empty Convertor, Payary (steps), Filters, Rings, Nut Bolts, U Clips, Pipe Pin, Gate M/c Dismentled, Liquid Container, Damaged Video Boxes And Their Cut Offs, Crt Cabinet, Location Boxes , Jumper, Jumper Box,ground Connections , Basket Steel, Water Cane/ Material Carring Trolley,steel Baskets, Containers, Trays, Frames, Stretchers, Nets/ Jali , Released Ground Connection, Halogen, Panto Pans, Compressor Spares, Dust Guard, Air , Filters And Filter Covers, Ms/gi Duct And Its Parts,insulating Armature Of Signal Cable, Hand Lamps, Side Lamps, Signal Lamps, Petromax, Hs Lamp, Clamps, Signal Post,signal Platform, Signal Base, Ms/ Gi Wire/ Coil, Funnels, Wall Protectors, Boxes, Iron Bar Pcs Released From Broken Construction , Desmantelled Weighing Machines Parts/covers Etc. Ms Pipe With Or Without Ci Attachment, Bins, Plates, Rings, Spares/parts /body Of Weighing Machine , Platform Weighing Machine And Its Parts, Pressure Switches And Other Switches , Signal Parts, Location Boxes And Their Cut Parts And Other Ferrous Misc. Scrap Items With Or Without Nf/ss/wooden /rubber /rexine Attachments Of Sorts And Sizes, Broken And Damaged, U/s For Rly. Use, Excluding Items: Rail And Rail Pcs., Axles And Axle Pcs., Wheel Tyre And Pcs., Cam Shafts, Helical Springs, Bolster Springs, Buffer Plungers, Face Plates, Axle Box Housings/ Casings, Brake Beams, Fish Plates, Screw Couplings/draw Bar Hooks, Break Beams, Reservoir Tanks, St Sleepers And Other Nf Items, Lbp.. Note: Hammering/pressing/ Cutting Is Permitted For Easy Loading Only.( Qty Approx)

Description: Ms Scrap ¿ 27.370 Mts- Delivery On Actual Weightment Basis. Lot No 5405 24 10 36 Gtl Gtl Ms Ap. Available With Sse P Way Bg Gtl. Scrap. Cond. And U/s. Released Ms Scrap Consisting Of (1)ms Liners T-3740-40000nos- Adopted Weight (0.230kgs) - 9.200mts (2)bolts And Nuts Off Size ¿ 98nos - Adopted Weight (1.195kgs) - 0.117mts. (3)glued Joints 60kg Pieces U/s ¿ 3nos - Adopted Weight (120kgs) - 0.360mts. (4)m.s.bracket Drg.no.t/4180 ¿ 37nos - Adopted Weight (8.000kgs) - 0.296mts. (5)m.s.bracket For Sej ¿ 52kg Drg.no.t/4181 ¿ 76nos - Adopted Weight (7.760kgs) ¿ 0.590mts. (6) M.s.bracket For Sej ¿ 52kg Drg.no.t/4182 ¿ 37nos - Adopted Weight (11.875kgs) ¿ 0.439mts. (7) Plate Screws T-3915 ¿ 144nos - Adopted Weight (0.475kgs) ¿ 0.068mts (8)gauge Tie Plates - 34nos- Adopted Weight (80.400kgs) - 2.734mts. (9) Ms Scrap(tonne) - 4.000mts. (10) Broken /crack 90r/52 Kg( C Fish Plates) ¿ 80nos- Adopted Weight (11.400kgs) - 0.912mts. (11) 90r Bend Fish Plates ¿ 344nos - Adopted Weight (12.400kgs) ¿4.266mts. (12) 90r Fish Plates ¿ 50nos - Adopted Weight (9.760kgs) ¿ 0.488mts. (13) Slide Chairs ¿ 200nos - Adopted Weight (19.5kgs) ¿ 3.900mts. Total Qty- 27.370 Mts. (approx). Available At Inside Of The Sse/p.way/bg/gtl Office Compound, Guntakal. S.s. No. G/w/gtl/ms/bg-gtl/2024-25/152 Dt.17/10/2024, . Sl No And St No. 1-13. Hsn Code: 720429/gst18%) Note To The Bidders 1) Successful Bidder Is Advised To Pay Bsv At The Earliest And Approach All The Concerned Witnessing Officials Immediately Along With Delivery Point Fixation Letter For Taking Loading To Avoid Last Minute Rush And Unforeseen Circumstances 2) Bidders May Visit The Site Of The Material For Physical Inspection Of The Material And Loading Spot Also, In All Aspects Before Bidding In E Auction.3) Post Auction No Representation Shall Be Entertained.4) For Photos Of This Lot, Kindly Click On View Lot Image On Bottom Left Side. 5) Gas/chisel Cutting Is Permitted, If Required, For Easy Loading And Transportation Purpose, Only After Ensuring Sufficient Safety Measures Against Fire Hazards Etc To Avoid Any Mishap To Any Person, Railway Material Etc. Witnessing Officials To Ensure That The Lot Is Delivered As Per Lot Description. 6) In Case Purchasers Require Usage Of Any Railway Assets/materials Such As Electricity/ Forklift Truck Etc. During The Process Of Delivery, They Are Required To Pay, The Prescribed Amount To Railways, As Directed By The Respective Custodian Of The Lot. 7) It Is The Responsibility Of The Purchaser/bidder To Return Excess Material, If Found During Gross Weighment, To The Nominated Premises Of The Custodian. 8) Clubbing Of The Lots, What So Ever, Is Not Permitted For Loading 9) Request For Fixation Of Delivery Point Should Be Invariably Raised In Ireps Online Only. Purchasers Are Requested To Make Use Of This Facility. No Representative Should Be Sent To The Office Of Sr.dmm/gtl For Collection Of Delivery Fixation Letter. As Soon As The Balance Sale Value Is Received By Railways Online, Delivery Order Will Be Issued Immediately, To Facilitate The Purchaser To Raise An Online Request For Fixation Of Delivery Point. 10 Railways Does Not Guarantee For Quality, Quantity Description Etc.

Description: Rails- 27.537 Mt-delivery On Sectional Weighment Basis. Lot No. 6436 24 09 06 Gtl Tpty-cgi R Ap. Available With Sse P W Pak Scrap Cond And U/s Released 75r,50 Bh,41 1/4r,60r,50r, And 80bh Rails Consisting Of:- 1)60r Classiii Rails -- - 45 Nos--- 132.550 Rm--- 03.945 Mts (approx) 2)50 Bh Classiii Rails--- 12 Nos--- 50.290 Rm--- 01.824 Mts (approx) 3)50r Classiii Rails -- - 102 Nos--- 318.85 Rm--- 07.908 Mts (approx) 4)41 1/4 Classiii Rails -- 84 Nos---- 229.320 Rm¿ 04.692 Mts (approx) 5)80bh Classiii Rails --- 59nos---- 139.690 Rm¿ 05.542 Mts (approx) 6)75r Classiii Rails ¿ 29 Nos---- 97.660 Rm¿ 03.626 Mts (approx) Total Qty: 27.537 Mt. Approx. Available At Km 92/17-19 (lh) At Chandragiri Yard,km 92/23-25(lh) At Chandragiri Iyard,km 92/11-13 (lh) At Tirupati Yard,km 92/17-19(lh) At Chandragiri Yard,km 92/23-25(lh) At Chandragiri Yard,km 103/39-93/17 Rh At Tirupati Yard,km 92/11-13 (lh) At Tirupati Yard,km 92/23-25(lh) At Chandragiri Yard,km 103/39-93/17 Rh Tirupati Yard,km 92/11-13 (lh) At Tirupati Yard,km 92/23-25(lh) At Chandragiri Yard,km 103/39- 93/17 Rh Tirupati Yard,km 92/11-13 (lh) Tirupati Yard,km 92/11-13 (lh) Tirupati Yard,km 92/23-25(lh) At Chandragiri Yard,km 92/25-27(rh) At Chandragiri Yard,km 103/39-93/17 Rh Tirupati Yard,km 92/11-13 (lh) Tirupati Yard,km 92/23-25(lh) At Chandragiri Yard,km 92/17-19 (lh) At Chandragiri Yard,km 92/23-25(lh) At Chandragiri Yard,km 92/23-25(lh) At Chandragiri Yard,km 92/11-13 (lh) Tirupati Yard. Ss No. G/w/gtl/r/pak/2024-25/131, Dt.03.09.24. Sl.no.01 To 20, St No. 1 To2,1,1,2,1,2,1,1,2,3,1,2,1,2,1,1,2,3,1. Hsn Code: 730210 - Gst 18%. Note To The Bidders 1) Successful Bidder Is Advised To Pay Bsv At The Earliest And Approach All The Concerned Witnessing Officials Immediately Along With Delivery Point Fixation Letter For Taking Loading To Avoid Last Minute Rush And Unforeseen Circumstances 2) Bidders May Visit The Site Of The Material For Physical Inspection Of The Material And Loading Spot Also, In All Aspects Before Bidding In E Auction.3) Post Auction No Representation Shall Be Entertained.4) For Photos Of This Lot, Kindly Click On View Lot Image On Bottom Left Side. 5) Gas/chisel Cutting Is Permitted, If Required, For Easy Loading And Transportation Purpose, Only After Ensuring Sufficient Safety Measures Against Fire Hazards Etc To Avoid Any Mishap To Any Person, Railway Material Etc. Witnessing Officials To Ensure That The Lot Is Delivered As Per Lot Description. 6) In Case Purchasers Require Usage Of Any Railway Assets/materials Such As Electricity/ Forklift Truck Etc. During The Process Of Delivery, They Are Required To Pay, The Prescribed Amount To Railways, As Directed By The Respective Custodian Of The Lot. 7) It Is The Responsibility Of The Purchaser/bidder To Return Excess Material, If Found During Gross Weighment, To The Nominated Premises Of The Custodian. 8) Clubbing Of The Lots, What So Ever, Is Not Permitted For Loading 9) Request For Fixation Of Delivery Point Should Be Invariably Raised In Ireps Online Only. Purchasers Are Requested To Make Use Of This Facility. No Representative Should Be Sent To The Office Of Sr.dmm/gtl For Collection Of Delivery Fixation Letter. As Soon As The Balance Sale Value Is Received By Railways Online, Delivery Order Will Be Issued Immediately, To Facilitate The Purchaser To Raise An Online Request For Fixation Of Delivery Point. 10 Railways Does Not Guarantee For Quality, Quantity Description Etc.

Details: SET OF SEATS FOR L.H.B GS AMRIT BHARAT COACHES. FOLLOW CUSHIONING MATERIAL EITHER PU FOAM TO RDSO SPEC. RDSO/2007/CG-04 REV. 01 OR SILICON FOAM TO RDSO SPEC.RSDO/ 2013/CG-13 REV. 01 WITH FIRE PROPERTIES COMPLIANT TO R21 HL-3 OF EN45545 STANDARD AND U PHOLSTERY TO RDSO SPEC.RDSO/2008/CG-07 REV-NIL WITH AMENDMENT SLIP NO-5 WITH CORRIGEN DUM 1 OF MAY 2015. COLOUR SHADE TO BE FOLLOWED AS PER DESIGN LNO.MD46271 DATED 30.09. 24, as per Drawing: MPLSLSDD VERSION 1, Packing Instruction: ALL PROTRUDING PORTIONS OF SEAT/ BERTH SHOULD BE PROTECTED WITH ENVIRONMENT FRIENDLY PRE MOULDED THERMOCOL CAP OF R EQUISITE STRENGTH OR SILICON RUBBER CAP AS AN ALTERNATE OPTION. EACH INDIVIDUAL SEAT/BE RTH SHOULD BE COVERED WITH BIODEGRADABLE BUBBLE SHEET OF DIAMETER 10MM AND THICKNES S 30 MICRON ALL ROUND. FLAP OF BERTH SHOULD BE OUTSIDE THE BUBBLE SHEET PACKING LEAVIN G SEAT & BERTH MOUNTING UNCOVERED. THEN IT SHOULD BE WRAPPED ALL ROUND IN THICK LAMIN ATED JUTE FABRIC OF SUFFICIENT STRENGTH. THE ASSEMBLY SHOULD BE TIED WITH NYLON STRIPS. I T IS FURTHER WRAPPED WITH BIODEGRADABLE POLYTHENE ALL ROUND TO PREVENT INGRESS OF DU ST/WATER. FOR THE FOLLOWING ITEMS (IF COVERED UNDER S&B SET) THE ITEM-WISE PI (LATEST VER .) WILL BE AS UNDER : 1. CHAIR ANGLES, EXPANDED METAL PARTITION FRAME,SUSPENSION STRAPS, SUPPORTS AND MTG. BKT PI004 2. HARDWARE ITEMS PI019 3. ITEMS LIKE BEARING BKT, CHAIN BKT, C ATCH ARGGT, HINGE BKT AND SLEEVES ETC. PI020 4. LADDERS PI031, LUGGAGE RACKS PI042 A LIST SHOULD BE PASTED ON EACH BOX SHOWING PO NO, PL NO, DESCRIPTION, DRG NO, QTY, FIRM NAME & ADDRESS, DATE OF DISPATCH ETC NOTE : FIRMS HAVE OPTION TO PROVIDE QR CODE . THE ITEM S HELL CARRY A QR CODE ON CARDBOARD BOX NEAR THE MANUFACTURER NAME STICKER CONTAININ G THE DETAILS AS LISTED BELOW: " NAME OF THE MANUFACTURER " PURCHASE ORD ER NUMBER " PURCHASE ORDER DATE " UNIQUE SERIAL NUMBER (OR LOT NUMBE R FOR BULK ITEMS) OF THE MANUFACTURER OR " DATE OF MANUFACTUR E " DELIVERY CHALLAN NO. " DELIVERY CHALLAN DATE THE QR CODE SHALL BE AS PER ISO/IEC18004 MODEL2 AND THE DATA SHALL BE AVAILABLE AS XM L USING THE TAGS DETAILED ABOVE

Description: CATEGORY: 14 4320 000007 43 4320 00007 WASHER THRUST WASHER THRUST OLITE Drg No IMPD 1144 A Spec No CQAE 4320 1327 d , 43 5305 015936 SCREW CH HD 4 point 75 MM 3 16 BSW 11MM LONG , 43 4320 000014 GLAND TOP BOTTOM PACKLESS Drg No IMPD 1151 D Spec No CQAE 4320 1327 d , W1 4320 000025 43 4320 000025 CAP SPIGOT TERMINAL Drg No IMPD 1162 B Spec No CQAE 4320 1327 d , 43 4320 000022 BUSH OILITE BOTTOM Drg No IMPD 1159B IMGA 0092 H and ccnnected drgs Spec No CQAE 4320 1327 d , X3 IXC GL SK 1477 TOMMY BAR 9 point 5 X 125MM LONG STEEL ST 58 , X3 IXC GL 500 4055 18 X3 4320 000414 STARTING ROPE 7 point 5X1150MM LONG NYLON CORD , X3 IXC GL SK 2241 X3 IXC GL SK 2211 SPANNER TUBULAR 17 AF 115 MM LONG , X3 3020 001210 INSERT FLEXIBLE COUPLING , 4930000458 SK 6946 X3 IXC GL SK 6946 GUN GREASE PUSH TYPE CAPACITY 150 CC , 43 4320 000028 WASHER LEATHER Drg No IMPD 1165 Spec No CQAE 4320 1392 e , W1 4320 000893 43 4320 000893 SPANNER FOR SPINDLE NUT , 5315000191 X3 5315 005791 PIN COTTER SPLIT 3 point 2MM DIA X 25MM LONG , 43 3040 000027 TERMINAL SPIGOT FOR 22 MM Drg No IMPD 0970 D Spec No CQAE 3040 1479 b , 43 4320 000028 TERMINAL SOCKET FOR 22MM Drg No IMPD 0972 A Spec No CQAE 3040 1479 b , 43 3040 000014 SHAFT ASSEMBLY FLEXIBLE 22X2440MM 8 FT Drg No IMSA 0161 E and connected drawings Spec No CQAE 3040 1479 b , 43 3040 000008 SHAFT ASSEMBLY FLEXIBLE 17 point 5MM X 7320MM 24FT Drg No IMSA 0161 E and connected drawings Spec No CQAE 3040 1478 b , 43 3040 000006 SHAFT ASSEMBLY FLEXIBLE 17 point 5MM X 2440MM 8 FT Drg No IMSA 0161 E and connected drawings Spec No CQAE 3040 1478 b , WA 6645 43 WA 6645 EXTRACTOR FDE BALL BEARING OUTER Drg No IMSA 0163 A , LV MT7 3110 000111 LV6 MT7 3110 000111 BEARING BALL SKF 6205 Spec No CQAE 4320 1392 e , W1 4820 008739 43 4820 003739 VALVE STOP LIFT CHECK 50 point 8 2 INCH FULL WAY Drg No IMSA 0431 IM 0625 A and connected drawings , 4730005837 43 4730 005837 STAINER SUCTION HOSE FRAME TYPE Drg No IM 0624 , W1 4720 000114 43 4720 000114 NOZZLE BRANCH PIPE FIRE HOSE 31 point 75MM 11 by 4 IN Drg No lM 0256 D connected drawings , W1 4320 000887 43 4320 000887 BRANCH PIPE 50 point 8MM 2 Inch Drg No lM 0256 D connected drawings , 43 4730 005838 ADOPTOR STRAIGHT PIPE TO HOSE ROD ANTI TWISTER , 5140000145 X3 5140 000145 TOOL BOX PRTABE SIZE 257 X 115 X 300 MM HEIGHT X 1MM THICK , 43 3040 000007 SHAFT ASSEMBLY FLEXIBLE 17 point 5X4880MM 16 FT , 43 4320 000003 Pump Water Centrifugal 38 pt 1mm 10920 LPH 15 pt 2M Head 1 1 by 2 in 2400 GPH 50ft Head Flexible Shaft Driven Drg No IMGA 0092 G IMGA 0092 H Spec No CQAE 4320 1327 d , 5310015548 X3 5310 015548 NUT PLAIN HEXAGON STEEL 5.5M 16X1 point 5 ZINC PLATED , 432000026 43 4320 000026 NUT COUPLING CASING END Drg No IMGA 0092 H IMPD 1163 A and connected drgs Spec No CQAE 4320 1327 d , 4320 00027 43 4320 000027 NIPPLE COUPLING CASING END Drg No IMPD1164 A , 5340009268 X3 5340 009268 MOUNT RESILIENT DUNLOP 31 406 1 MN 40 , W1 WA 1534 HOSE UNION FEMALE 2 IN BSP Spec No IND GS 1201IND TC 2462 e , 43 2815 004330 ASSEMBLY PACKING BOX Drg No IMSA 0309

Description: Points And Crossing Rails-52.550 Mt-delivery On Actual Weighment Basis. Lot No. 5405 24 10 31 Gtl Gtl-tim P And C Ap. Available With Sse P Way Bg Gtl Scrap Cond. And U/s Released Points And Crossing Rails Consisting Of 1) Tongue Rail 60 Kg 1 In 12(12.37 Mtrs) ¿ 3 Nos-600kgs-1.800mt. 2) Tongue Rail 60 Kg 1 In 12 ¿ 12.500mtrs-3 Nos-611 Kgs-1.833mts. 3) Tongue Rail 60 Kg 1 In 8.5 ¿ 7.65 Mtrs-04 Nos-500kgs-02.000mts. 4) Tongue Rail 60 Kg 1 In 8.5-11.74 Mtrs-02 Nos-621kgs-1.242mts. 5) Tongue Rail 60 Kg 1 In 8.5-11.07 Mtrs-01 Nos-615kgs-0.615mts. 6) Tongue Rail 60 Kg 1 In 8.5-12.10 Mtrs-02 Nos-640kgs-1.242mts. 7) Tongue Rail 52 Kg 1 In 8.5-11.80 Mtrs-01 Nos-534kgs-0.534mts. 8) Tongue Rail 52kg 1 In 8.5-11.91 Mtrs-1 Nos-540 Kgs-0.540mts. 9) Tongue Rails Of Cutting Pieces Of Different Sizes Of Weight ¿ 11046 Kgs-11.046mts. 10) Check Rail 60 Kg -4.34 Mtrs-11 Nos¿241kgs-2.651mts. 11). Tongue Rails 52 Kg 1 In 8.5-11.90 Mtrs-02 Nos-510 Kgs-1.020mts. 12). Tongue Rails 60 Kg 1 In 12-12.36 Mtrs-1 Nos-600 Kgs-0.600mts. 13) Tongue Rails 60 Kg 1 In 16-12.90 Mtrs-04 Nos-650 Kgs-2.600mts. 14) Tongue Rails 60 Kg 1 In 12-12.50 Mtrs-02 Nos-610 Kgs-1.220mts. 15). Check Rails 60 Kg ¿ 4.34mtrs-04 Nos ¿ 241kgs-0.964mts. 16) Tongue Rails 60 Kg 1 In 8.5-11.80 Mtrs-06 Nos-621 Kgs-3.726mts. 17) Check Rail 60 Kg ¿ 4.340mtrs-03 Nos 241 Kgs-0.723mts. 18) Check Rails 52 Kg ¿ 4.340 Mtrs-12 Nos-212 Kgs-2.544mts. 19) Check Rail 60 Kg ¿ 4.34mtrs-28 Nos-241kgs-6.748mts. 20) Check Rail 60 Kg ¿ 4.340mtrs-24 Nos-241kgs-5.784mts. 21) 1 In 12 Head Treated Welding Crossing ¿ 4 Nos-770kgs-3.080mts. Total Qty:118 Nos-52.550mt Mt. Approx. Available At Km Tim/fci1-fci 2 Near Auto Stand, Km 438/34-439/02 Dn Line And Inside Of The Office Compound, In Front Of New Rpf Barracks, Km 443/39-41 Near Lc 183, Km 443/53-54a Near Pt No. 90a, Km 364/24-26, Inside To The Office Compound, Km Ts/17-ts/16, Guntakal . S S No G W Gtl P And C /bg-gtl/24-25/153, Dt. 17.10.24. Sl No 1-21, And St No. 1 To 13. Hsn Code: 730210 - Gst 18%. Note To The Bidders 1) Bidders May Visit The Site Of The Material For Physical Inspection Of The Material And Loading Spot Also, In All Aspects Before Bidding In E Auction.2) Post Auction No Representation Shall Be Entertained.3) For Photos Of This Lot, Kindly Click On View Lot Image On Bottom Left Side.4) Gas/chisel Cutting Is Permitted ,if Required, For Easy Loading And Transportation Purpose, Only After Ensuring Sufficient Safety Measures Against Fire Hazards Etc To Avoid Any Mishap To Any Person, Railway Material Etc. Witnessing Officials To Ensure That The Lot Is Delivered As Per Lot Description 5) In Case Purchasers Require Usage Of Any Railway Assets/materials Such As Electricity/ Forklift Truck Etc. During The Process Of Delivery, They Are Required To Pay, The Prescribed Amount To Railways, As Directed By The Respective Custodian Of The Lot. 6) It Is The Responsibility Of The Purchaser/bidder To Return Excess Material, If Found During Gross Weighment, To The Nominated Premises Of The Custodian. 7)clubbing Of The Lots, What So Ever, Is Not Permitted For Loading 8) Request For Fixation Of Delivery Point Should Be Invariably Raised In Ireps Online Only. Purchasers Are Requested To Make Use Of This Facility. No Representative Should Be Sent To The Office Of Sr.dmm/gtl For Collection Of Delivery Fixation Letter. As Soon As The Balance Sale Value Is Received By Railways Online, Delivery Order Will Be Issued Immediately, To Facilitate The Purchaser To Raise An Online Request For Fixation Of Delivery Point. 9) Railways Does Not Guarantee For Quality ,quantity Description Etc.

Details: Description :supply, Installation And Commissioning Of Hsd Oil Firingsystem Of X Class Steam Locomotive X-37392 To Meet The Heat Generation Of Steam Press ure 14.06 Kg/square Centimeter With Super Heated Temperature Of 296 Degree C (saturationtemperature -198 Degree C + Super Heated Temperature - 98 D egree C) In Horizontal Multi Tubular Fire Tube All Welded X-class Steam Locomotive Boiler Of Steam Producing Capacity 5 Tons / Hour Having Heating Surface Are a Of 96 Square Meter And Furnace Volume Of (1763 Mm X 1052 Mm X 1168 Mm ) Utilizing Hsd As Per Is Specification 1460-2005( 5th Revisionor Latest) Amen dment No-3,sept ,12. With Gross Calorificvalue (gcv) 10600-11300 Kcal/kg & Net Calorific Value (ncv)10100-10300 Kcal/kg As Per The Following Thirteen Spe cifications. (1) Goc-spec-x-040- Part 1 Of 12 Ver 02 Issue 01 (2) Goc-spec X-040- Part 2 Of 12 Ver 01 Issue 02 (3) Goc-spec X-040- Part 3 Of 12 Ver 02 Issue 01 (4) Goc-spec X-040- Part 4 Of 12 Ver 01 Issue 02 (5) Goc-spec X-040- Part 5 Of 12 Ver 01 Issue 02 (6) Goc-spec X-040- Part 6 Of 12 Ve r 02 Issue 01 (7) Goc-spec X-040- Part 7 Of 12 Ver 01 Issue 02 (8) Goc-spec X-040- Part 8 Of 12 Ver 01 Issue 02 (9) Goc-spec X-040- Part 9 Of 12 V er 01 Issue 02 (10) Goc-spec X-040- Part 10 Of 12 Ver 01 Issue 02 (11) Goc-spec X-040- Part 11 Of 12 Ver 01 Issue 02 (12) Goc-spec X-040- Part 1 2 Of 12 Ver 01 Issue 02 (13) Goc-spec-x-041- Ver 01 Issue 02 Note: Works To Be Carried Out At Erecting Shop/central Workshops, Sr, Golden Rock And Co mmissioning After Load Trials To Be Carried Out At Mettupalayam (mtp) Elevation Of 325.22 Meters- Coonoor (onr) Elevation Of 1711 Meters Section Of Altitude F rom Mean Sea Level (msl) Distance Of 28 Km Including 21 Km Of Rack Section From Kallar (qlr) To Coonoor (onr) Of Nilgirimountain Railway (nmr). Refer De tailed Specifications And Drawings Attached Alongwith Tender. Performance Warranty: The Supplier Should Provide A Warranty Of One Year Fro m The Date Of Commissioning At Mettupalayam (mtp) Elevation Of 325.22 Meters - Coonoor (onr) Elevation Of 1711 Meters Section Of Altitude From Mean Sea level (msl) For The Satisfactory Working Of The Supplied Items. Any Equipment/component/subassembly Which Fails During Warranty Period Shall Be Replaced/r ectified Free Of Cost By The Supplier Within 24 Hrs From The Reporting Time. [ Warranty Period: 12 Months After The Date Of Delivery ] ]

Details: Inches Make Taparia, Stanley, Spartan, Tata Agrico , Bolt cutter 30 Inches Make Taparia, Stanley, Spartan, Tata agrico , Chisel For Concrete 1 By 2 Inch Make Taparia, stanley, Spartan, Tata Agrico , Chisel For Concrete 1 By 2 inch To 1 Inch Make Taparia, Stanley, Spartan, Tata Agrico , framing Square 22 Inches Make Taparia, Stanley, Spartan, tata Agrico , Screw Driver Set Make Taparia, Stanley, spartan, Tata Agrico , Hacksaw 12 Inch Tubular Make taparia, Stanley, Spartan, Tata Agrico , Hacksaw replacement Blades 12 Inch Long Make Taparia, Stanley, spartan, Tata Agrico , Tin Snip 12 Inch Make Taparia, stanley, Spartan, Tata Agrico , Claw Hammer Make Taparia, stanley, Spartan, Tata Agrico , Sledge Hammer 7kg. Make taparia, Stanley, Spartan, Tata Agrico , Sledge Hammer 10 kg. Make Taparia, Stanley, Spartan, Tata Agrico , Carpenter hammer 3 Inches Make Taparia, Stanley, Spartan, Tata agrico , Level 12 Inch Make Taparia, Stanley, Spartan, Tata agrico , File Flat 12 Inches Make Taparia, Stanley, Spartan, tata Agrico , Carpenter Pencil Packets Make Apsara, Natraj, navneet , Paint Bursh 3 By 4 Inch Make Amber Or Equivalent , Shovels Round 8 Inch Make Taparia, Stanley, Spartan, Tata agrico , Spade Shovels 12inch X 10inch Make Taparia, stanley, Spartan, Tata Agrico , Spades Make Taparia, stanley, Spartan, Tata Agrico , Fire Axe 2.5 Feet Make taparia, Stanley, Spartan, Tata Agrico , Crow Bar 2 Feet make Taparia, Stanley, Spartan, Tata Agrico , Crow Bar 3 feet Make Taparia, Stanley, Spartan, Tata Agrico , Pick mattock 3kg Make Taparia, Stanley, Spartan, Tata Agrico , pry Bar 6 Feet Make Taparia, Stanley, Spartan, Tata Agrico , ventilator And Air Tube 7 Meters Long , Extension Cord 8mm dia 25meters Long , Working Lamps With 50m Lead , Fuel containers 20 Liters , Reflective Jackets Water Proof Make 3m, Udyogi, Karam, Champion, Sure Safety , Safety Helmets make 3m, Udyogi, Karam, Champion, Sure Safety , Boots, hard Toe Steel Shank Make 3m, Udyogi, Karam, Champion, sure Safety , Tarpaulin 4m X 4m , Tarpaulin 6m X 6m , mega Phone Battery Operated Load Speakers Make Ahuja or Equivalent , Rope Manila 100m Rolls , Rope Nylon 100m rolls , Traffic Cones Make 3m, Udyogi, Karam, Champion, sure Safety , Wooden Planks 5m X 100mm X 100mm , wooden Planks 3m X 100mm X 50mm , Safety Vest fluorescent Make 3m, Udyogi, Karam, Champion, Sure safety , Heavy Duty Work Gloves Make 3m, Udyogi, Karam, champion, Sure Safety, Venus , Face Shield Make 3m, udyogi, Karam, Champion, Sure Safety, Venus , Safety goggles Make 3m, Udyogi, Karam, Champion, Sure Safety, venus , Head Light Pelican Heads Up 2780 Or Equivalent , nose Mask Make 3m Make 3m, Udyogi, Karam, Champion, sure Safety, Venus , Dust Mask Make 3m, Udyogi, Karam, champion, Sure Safety, Venus