Fire Tenders

Description: Lot No.divn/nmp/28/09/24-25/bg/cond./8w/wgn. Description- Iron And Steel Scrap Cutup Parts Of Bg Cond./8w/wgn. Without Contents If Any. 1) Nf 30058961213 Bcnm1 (nlb) 2) Er 30028961885 Bcnm1 (nlb) 3) Ser 30078961798 Bcnm1 (nlb) 4) Cr 30018860198 Bcnm1 (nlb) 5)cr 30018863007 Bcnm1 (nlb) 6) Er 30028963452 Bcnm1 (nlb) 7) Er 30028967320 Bcnm1 (nlb) 8) Nf 30058962050 Bcnm1 (wm) 9) Er 30028864308 Bcnm1 (wm) 10) Er 30028962066 Bcnm1 (wm) Nb: (1): I) Wagons Are To Be Sold Without 14 Nos. Nlb Trolleys Against Srl. No. 01 To 07. Ii) Wagons Are To Be Sold With 06 Nos Wm Trolleys Against Srl No. 08 To 10. Iii) All Wagons To Be Sold Without 40 Nos. Wheel Sets With Ctrb, Brake Cylinder Complete, Brake Gear Complete, Hand Brake Set Complete With Connecting Link, Bush, Seam Less Pipe With Fitting For Air Brake Equipment, Distributor Valve, Apm Valve, Sab, Coupler Body With Shank Wear Plate, Knuckle, Knuckle Pivot Pin, Coupler Yoke, Yoke Pin, Yoke Pin Support With Wear Plate, High Capacity Draft Gear With Draft Gear Follower, Etc And Other Excluded Fitting As Per Latest Excluded Fitting List * *excluded Fitting List Letter No. M2/c-19/e.ftg/ 1302 Dt.25.10.2023, Nb(2): Special Condition For Rolling Stock- A) All Excluded Fitting With Nlb Trolleys Are To Be Handed Over By The Purchaser At The Nominated Location Suggested By The Concerned Sse And Wheel Sets To Sse/44/nws/kgp Respectively For Which They Have To Arrange Labour,tools & Equipment For Loading Of The Excluded Items From Cutting Site And Then Transport It To Nominated Location By Their Own Arrangement/vehicle. They Have To Unload And Stack The Excluded Materials By Their Own Arrangement Including Labour And Hand Over The Same To Concern Stock Holder With Clear Acknowledgement. (b) The Excluded Fittings Should Be Kept Away From The Cutting Lines And Adjacent Areas So That Future Grounding Of Rolling Stock Is Not Hampered In Any Way. The Delivery Of Cut Pieces Of Last 10 Percent Of Lot Size (subject To Minimum Of 01 No. Rolling Stock) Will Commence Only When All Excluded Fittings Arisen Out Of Sold Lot Has Been Successfully Handed Over To Custodian. (c) Delivery Witnessing Official Will Record Following Certificate On Sale Delivery Register. "purchaser Has Cleared All Nil Value Item Arisen After Cutting Of Sold Rolling Stock And There Is No Left Over Available At Cutting Site. (d) The Rolling Stock May Either Be On The Cutting Line Or Grounded And May Or May Not Have Trolleys/wheel Set Attached But The Purchaser Needs To Shift To Concerned Location As Advised By Concerned Sse. (e)the Purchaser Is Required To Take Adequate Safety Measures So That No Railway Property In Near Vicinity Of The Cutting Spot/ Loading Point And Unloading Point Is Damaged In Any Way. The Purchaser Will Be Responsible For Any Damage/fire Accident To The Railway Property Caused During Operation And Delivery, And Also He Will Be Solely Responsible Of Any Loss Applied (railway Employee Or Any Other Person) Caused Due To Any Activities Involved While Dismantling /cutting, Transportation Loading And Unloading Of All Excluded Fittings Of The Wagons. Including Wheel Sets And Trolleys. Nb: (3) Delivery Will Be Given In Numbers.

Description: BOQ ITEMS: Complete cosultancy services required of single storey bldg of approx plinth area 126.14 Sqm as per AE & single line plan attached for archetectural and structural drawing of the description are as follows, Following archetectural drawing shall be prepared and submitted by consultant, A Site plan B Floor plan elevation and enough number of sections to cover all details of building C Roof plan of building D Schedule of finishes plan & internal electrification plan E Joinery work Aluminium door & window , Following structural drawing based on soil report & data given under para 2.00 shall be prepared based on latest IS 456 code and submitted by consultant. It is also to be noted that while submitting the structural drawing consultant shall also mention data considered in designing for checking purpose, A RCC foundation plan and shedule of foundation & column B RCC roof beam & slab plan & shedule details of roof beam & slab C RCC lintel beam throughout perimeter of bldg plan & shedule details D Misc number of drawing like beam column connection etc required to cover all details for RCC work , Following documents and guidelines design parameters is hereby submiited to the consultant for designing purpose , A Soil report, B Approved Line Plan and Site Plan of Board Proceedings., C Copy of Adm Approval AEs Pt I & II , D Reinforced cement concrete shall be M 25 design mix using either OPC 43 grade cement, E Reinforcing shall be high strength deformed steel bars produced by thermo mechanical treatment process of Gde Fe 500 Fe 500d Fe 550 Fe 550d, F Bricks shall be fly ash bricks, H Dead loads The death load of the structure shall be taken as per IS 875 Part 1, I Imposed load The imposed load live loads on the structure shall be adopted in accordance with IS 875 part2 keeping consideration under public building, J Wind loads The project site is located at Amritsar Wind loads as per latest IS 875 code for local region at Amritsar shall be considered Consultant shall visit the site to decide terrain and topographical factors to be considered for working out the wind intensity, K Seismic loads The project site is located at Amritsar which is under seismic zone IV The importance factor for structure shall be taken as per IS Code The structure shall be analysed as per latest edition IS 1893 and IS 13920, L Misc load The structure shall be designed analysed for misc loads like temp impact erection accidental load etc as per IS 875 part 5, M Load combination The structure shall be designed for all the load combination as per latest IS codes like IS456 IS 875 part 5 and IS 1893 , N Joints and connections are critical to the stability of the structure. Details of all beam column joints should be made available by the consultant in accordance with the relevant IS codes., O The detais of rainwater pipe gutter pipe shall also be mentioned in roof plan., P Misc information like exposure condition & fire resistance etc shall be considered keeping consideration under local condion at Amritsar and public building., Q Software to be used STAAD Pro and STAAD advance foundation design SAFE, R Preparation of all archetecturalstructura drawings providing details of all structural elements using AutoCAD.

Description: Allocation No.21213304.on As Is Where Is Basis. Iron And Steel Cut-up Parts Of Condemned Conventional Coach Body With Condemned Bogies, Bearing No.[1]er/97560,type-gs,make-icf, [2]er/98520 ,type-gs, Make-rcf,[3]er/98501,type-gs, Make-beml,[4]er/97217,type-wgscn,make-rcf, [5]er/96276,type-wgscn, Make-icf,[6] Er/98210, Type-wgscn, Make-icf. Total Qty.-06nos. Location-c And W Extension Yard/kpa. To Be Sold With 02 Nos. Of Cond. Bogies (per Coach) Along With All Available Fittings Including Unserviceable Helical Spring But Without Excluded Fittings. Excluded Fittings/items Are 04 Nos. Of Wheel Sets (per Coach) With Its Fittings And Nonferrous Attachment If Any Are Excluded From Sale And Will Be Returned To The Custodian As Per Extent Procedure. Approx Saleable Weights Of Condemned Conventional Coaches Are Included With The Un-serviceable Items, Ferrous-iron, N- Ferrous/ Other¿s Items .i.e. Un-serviceable Aluminium Window Guide Frame- (01 No. In 5.5kg. Approx. For Coach Sl-1, 32 Nos. In 176kg. Approx. For Coach Sl-3, 30 No. In 165kg. Approx. For Coach Sl-4 & Nil For Coach Sl- 2,5 &6), Un-serviceable Aluminium Checker Plate-( 66kg. Approx. For Coach Sl-4, 33kg. Approx. For Sl-5, 49.5kg. Approx. For Sl-6 & Nil For Coach Sl-1,2&3), Un-serviceable Aluminium Cable-(35 Kg Approx. For Coach Sl-1,2,3 & 36.72 Kg. Approx. For Sl-4,5,6), S/s Wash Basin-( Nil For All Coaches), S/s Floor-(nil For Coach Sl-1,4 &6, 307 Kg. Approx. For Sl-2, 230 Kg. Approx. For Sl-3 & 384 Kg. Approx. For Sl-5), Un-serviceable Ss Sheet-(nil For All Coaches), Lp Sheet, Pvc Sheet, Compreg Sheet, Coir, Rexin, Frp Moulding, Glass, Wood, Unserviceable Bogie Fittings, Helical Springs Etc. Approx Weight Of Lp Sheet, Pvc Sheet, Compreg Sheet, Coir, Rexin, Frp Moulding, Glass, Wood Are Approx. 1.650mt For Sl-1, 1.875mt For Sl-2&3, 2.165mt For Sl-4&6, 2.125mt For Sl-5. Nb: Step Hanger-05nos. I.e. Approx. 100kg. From Sl-1&5, 02nos. I.e. Approx. 40kg. From Sl-2, 01no. I.e. Approx. 20kg. From Sl-4 And Approx. 225 Kg Lp Sheet From Coach Sl-1, 17 Nos Middle Birth I.e. Approx. 340 Kg. From Sl-4 & Approx. 40 Kg. Compreg Sheet From Coach Sl-5 Are Stripped Out. Condition- [1] After Sale, Coaches Will Be Handed Over To The Purchaser For Dismantling And Cutting At C&w Extension Yard/kpa. [2] Cutting And Dismantling Of Coaches Are To Be Made At C&w Extension Yard/kpa By Purchasers Own Arrangement After Ensuring Sufficient Safety Measures Against Fire Hazards. [3]excluded Fittings Available In The Said Coaches Are To Be Returned To The Custodian, Before Delivery.

Description: Lot No.divn/mn/27/09/24-25/bg/cond./8w/wgn, Description- Iron And Steel Scrap Cutup Parts Of Bg Cond./8w/wgn. Without Contents If Any. 1) Se 25079460463 Boxnr (nlb) Steel Body 2) Er 25029660196 Boxnr (nlb) Steel Body 3)er 25029760025 Boxnr (nlb) Steel Body 4) Se 25079763755 Boxnr (nlb) Steel Body 5) Se 30078961507 Bcnm1 (nlb) 6) Nf 30058966546 Bcnm1 (wm) 7) Cr 30018961925 Bcnm1 (wm) 8) Nf 30059260247 Bcnam1 (wm) 9) Se 30079365533 Bcnam1(wm) Nb: (1): I) Wagons Are To Be Sold Without 10 Nos. Nlb Trolleys And Nl Trolleys Against Srl. No. 01 To 05. Ii) Wagons Are To Be Sold With 08 Nos Wm Trolleys Against Srl No. 06 To 09. Iii) All Wagons To Be Sold Without 36 Nos. Wheel Sets With Ctrb, Brake Cylinder Complete, Brake Gear Complete, Hand Brake Set Complete With Connecting Link, Bush, Seam Less Pipe With Fitting For Air Brake Equipment, Distributor Valve, Apm Valve, Sab, Coupler Body With Shank Wear Plate, Knuckle, Knuckle Pivot Pin, Coupler Yoke, Yoke Pin, Yoke Pin Support With Wear Plate, High Capacity Draft Gear With Draft Gear Follower, Etc And Other Excluded Fitting As Per Latest Excluded Fitting List * *excluded Fitting List Letter No. M2/c-19/e.ftg/ 1302 Dt.25.10.2023, Nb(2): Special Condition For Rolling Stock- A) All Excluded Fittings Are To Be Handed Over To Sse/w-yard/nws, Trolleys To Sse/38/nws And Wheel Sets To Sse/44/nws Respectively For Which They Have To Arrange Labour,tools & Equipment For Loading Of The Excluded Fittings From Cutting Site And Then Transport It To Nominated Location By Their Own Arrangement/vehicle. They Have To Unload And Stack The Excluded Fittings By Their Own Arrangement Including Labour And Hand Over The Same To Concern Stock Holder With Clear Acknowledgement. (b) The Excluded Fittings Should Be Kept Away From The Cutting Lines And Adjacent Areas So That Future Grounding Of Rolling Stock Is Not Hampered In Any Way. The Delivery Of Cut Pieces Of Last 10 Persent Of Lot Size (subject To Minimum Of 01 No. Rolling Stock) Will Commence Only When All Excluded Fittings Arisen Out Of Sold Lot Has Been Successfully Handed Over To Custodian. (c) Delivery Witnessing Official Will Record Following Certificate On Sale Delivery Register. "purchaser Has Cleared All Nil Value Item Arisen After Cutting Of Sold Rolling Stock And There Is No Left Over Available At Cutting Site. (d) The Rolling Stock May Either Be On The Cutting Line Or Grounded And May Or May Not Have Trolleys/wheel Set Attached But The Purchaser Needs To Shift To Concerned Location As Advised By Concerned Sse. (e)the Purchaser Is Required To Take Adequate Safety Measures So That No Railway Property In Near Vicinity Of The Cutting Spot/ Loading Point And Unloading Point Is Damaged In Any Way. The Purchaser Will Be Responsible For Any Damage/fire Accident To The Railway Property Caused During Operation And Delivery, And Also He Will Be Solely Responsible Of Any Loss Applied (railway Employee Or Any Other Person) Caused Due To Any Activities Involved While Dismantling /cutting, Transportation Loading And Unloading Of All Excluded Fittings Of The Wagons. Including Wheel Sets And Trolleys. Nb: (3) Delivery Will Be Given In Numbers.

Description: Lot No.ws/s-yd/36/10/24-25/bg/cond./8w/wgn. Description- Iron And Steel Scrap Cutup Parts Of Bg Cond./8w/wgn. Without Contents If Any. 1) Cr 10019602027 Boxnm1 (nlb) 2) Se 10079661644 Boxnm1 (nlb) 3) Sc 25099661758 Boxnr (nlb) Steel Body 4) Er 10029460433 Boxnm1 (nlb) 5) Er 72029561657 Bobrnm1 (nlb) 6) Se 10079560763 Boxnm1 (wm) 7) Nr 10039460652 Boxnm1 (wm) Nb: (1): I) Wagons Are To Be Sold Without 10 Nos. Nlb Trolleys Against Srl. No. 01 To 05. Ii) Wagons Are To Be Sold With 04 Nos Wm Trolleys Against Srl No. 06 And 07. Iii) All Wagons To Be Sold Without 28 Nos. Wheel Sets With Ctrb, Brake Cylinder Complete, Brake Gear Complete, Hand Brake Set Complete With Connecting Link, Bush, Seam Less Pipe With Fitting For Air Brake Equipment, Distributor Valve, Apm Valve, Sab, Coupler Body With Shank Wear Plate, Knuckle, Knuckle Pivot Pin, Coupler Yoke, Yoke Pin, Yoke Pin Support With Wear Plate, High Capacity Draft Gear With Draft Gear Follower, Etc And Other Excluded Fitting As Per Latest Excluded Fitting List * *excluded Fitting List Letter No. M2/c-19/e.ftg/ 1302 Dt.25.10.2023, Nb(2): Special Condition For Rolling Stock- A) All Excluded Materials Including Wheel Sets And Nlb Trolleys Are To Be Handed Over By The Purchaser At The Nominated Location Suggested By The Concerned Sse For Which They Have To Arrange Labour, Tools & Equipment For Loading Of The Excluded Items From Cutting Site And Then Transport It To Nominated Location By Their Own Arrangement/vehicle. They Have To Unload And Stack The Excluded Materials By Their Own Arrangement Including Labour And Hand Over The Same To Concern Stock Holder With Clear Acknowledgement. (b) The Excluded Fittings Should Be Kept Away From The Cutting Lines And Adjacent Areas So That Future Grounding Of Rolling Stock Is Not Hampered In Any Way. The Delivery Of Cut Pieces Of Last 10 Present Of Lot Size (subject To Minimum Of 01 No. Rolling Stock) Will Commence Only When All Excluded Fittings Arisen Out Of Sold Lot Has Been Successfully Handed Over To Custodian. (c) Delivery Witnessing Official Will Record Following Certificate On Sale Delivery Register. "purchaser Has Cleared All Nil Value Item Arisen After Cutting Of Sold Rolling Stock And There Is No Left Over Available At Cutting Site. (d) The Rolling Stock May Either Be On The Cutting Line Or Grounded And May Or May Not Have Trolleys/wheel Set Attached But The Purchaser Needs To Shift To Concerned Location As Advised By Concerned Sse. (e)the Purchaser Is Required To Take Adequate Safety Measures So That No Railway Property In Near Vicinity Of The Cutting Spot/ Loading Point And Unloading Point Is Damaged In Any Way. The Purchaser Will Be Responsible For Any Damage/fire Accident To The Railway Property Caused During Operation And Delivery, And Also He Will Be Solely Responsible Of Any Loss Applied (railway Employee Or Any Other Person) Caused Due To Any Activities Involved While Dismantling /cutting, Transportation Loading And Unloading Of All Excluded Fittings Of The Wagons. Including Wheel Sets And Trolleys. Nb: (3). The Firm Shall Follow All Rules Regarding The Loading Of Vehicle As Per Rto /statuary Bodies Governed Time To Time. Railway Will Not Be Responsible Any Breach Of Rules During Loading / Transportation Done By The Purchaser. Nb: (4) Delivery Will Be Given In Numbers.

Description: 11 Coaches--lot No 5624115027 At Crs/tpty Scrap Depot, Ap [andhra Pradesh] Available With Cdms/sd/crs/tpty Scrap Depot. Desc: Cond. &u/s Bg & Mg Coaches Without Bogie Complete, Wheel Sets & Rc Items.. Coach Nos (1)scwgaccn 017137 (2)sc Gslr 001104(3)scwgaccn 001060 (4)sc Gs 007410(5)wgscn 001099 (6)wgscn 011026(7)wgscn 011040(8)sc Gs 017457(9)sc Gs 017477(10)sc Gslr 017708 (11)sc Gs 007473 Make:icf/rcf. Net Saleable Weight : 247.50773 Mts Approx.(including Ms Items Weight : 226.39555 Mts Approx; Uic Rubber Wt.:0.9mts Approx; Steel Panels Wt.:0.09mts Approx; Pvc Copper Cables Wt.:0.5155mts Approx; Aluminium Shutter Frames With Sill Plates Wt.:0.336mts Approx; App Wt. Of Rexine, Foam, Pvc, Compreg Wood/sheets & Limpet Sheets Wt.:15.37mts Approx; S.s Lavatory Pans Wt.:0.96mts Approx; S.s Under Slung Tanks Wt.:1.1mts Approx; Aluminium Hat Racks Wt.:0.232mts Approx; Aluminium Window Filments With Pipe Wt.:0.0264mts Approx; Aluminium Wt.:0.685mts Approx; Aluminium Beadings Wt.:0.1mts Approx; Aluminium Hydraulic Doors Wt.:0.03mts Approx; Aluminium Window Frames With Sill Plates Wt.:0.224mts Approx; Al. Ac Roof Vents Wt.:0.04888mts Approx; Al. Curtain Pipes Wt.:0.0032mts Approx; Roof Al. Weight Wt.:0.7mts Approx;) Note:-(1) Cutting Is Permitted To Loadable Sizes.(2)rc Items Mentioned In The Excluded/reclaimed Items List To Be Returned To Railways. The Quantity Of Rc Items Mentioned Below Will Be Arrived As Per The Joint Handing Over Memo Issued By The Railway Authorities To The Successful Bidder At The Time Of Cutting/handing Over Of The Lot And The Same List Of Rc Items Should Be Returned To Railways By The Purchaser.(3)railways Does Not Guarantee For Quality, Quantity, Description, Etc. Purchasers Are Advised To Physically Inspect The Lot And Satisfy Themselves Before Bidding As No Communication/complaints Will Be Entertained Under Any Circumstances Regarding Shortage Of Material. (4)any Non-ferrous Items, Electrical Items, Rc Items Found In Excess To The List Mentioned Below & Not Appearing In The List Of Saleable Items To Be Returned To Railways.(5)successful Bidders Must Ensure The Rc Items At The Time Of Taking Over And Same Should Be Returned To Custodian Before Effecting Delivery. In Case If Item Cannot Be Seen/count/weigh Before Dismantling, Then The Same Will Be Jointly Inspected Soon After Dismantling For Inclusion In Joint Collection List Of Rc Items.(6) The Purchaser Is Responsible For Providing Adequate Safety Firefighting Equipment Such As Fire Extinguishers Etc., On The Spot At The Time Of Cutting And Delivery. (7)free Delivery Period(fdp) For The Lot Is 60 Days. (8)in Addition To The Above, Purchasers Must Comply With The Special Conditions Mentioned Below. Location: Line No.04 Of Mrs Cutting Yard. Delivery On Number Basis Only. Total Qty 11 Numbers.pl No 98111048(01) Hsn Code:72042990. Gst 18% On Forward Charge Basis.

Description: Assorted Ferrous Scrap-28.000 Mt-delivery On Actual Weighment Basis. Lot No. 5364 24 10 73 Gtl Gy Af Ap. Available With Sse Dsl Gy. Scrap, Condemned, Released, Unserviceable Assorted Ferrous Scrap Consisting Of Scrap Cond. And U/s Released. Assorted Ferrous Scrap Consisting Of 21 Items 1) Cam Gears- 10 Nos/ 550 Kgs (approx) 2) Pistons - 10 Nos/ 320 Kgs (approx) 3) Buffers - 05 Nos/ 750 Kgs (approx) 4) Cbc Yoke - 06 Nos/ 900 Kgs (approx) 5) Bull Gears - 30 Nos/ 13500 Kgs (approx) 6) Hhp Liners - 30 Kgs/ 2088 Kgs (approx) 7) Hhp Pistons- 20 Nos/ 466 Kgs (approx) 8) Coil Springs - 50 Nos/ 1850 Kgs (approx) 9) Dampers - 50 Nos/1250 Kgs (approx) 10) Vibration Dampers - 01 No/ 125 Kgs (approx) 11) Gear Cases - 10 Nos/ 700 Kgs (approx) 12) Hhp Pull Rods Units - 05 Nos/ 225 Kgs (approx) 13) Hhp Compressor Liners - 05 Nos/ 232 Kgs (approx) 14) Alco Cam Shafts - 20 Nos/ 3000 Kgs (approx) 15) Brake Shoe Holders - 05 Nos/ 125 Kgs (approx) 16) Alco Fip Supporters - 10 Nos/ 300 Kgs (approx) 17) Blower Pulleys - 15 Nos/ 204 Kgs 18) Hhp Connecting Rods - 30 Nos/ 852 Kgs (approx) 19) Alco Lube Oil Pump Housing - 01 No/ 98 Kgs (approx) 20) Ecc Pulley - 02 Nos/ 90 Kgs (approx) 21) Traction Link - 05 Nos/ 375 Kgs (approx) Total Gross Weight - 28000 Kgs/ 28.000 Mts (approx). (delivery On Actual Weighment Basis). Available In New Scrap Yard Bin No. 4-7 Of Gooty Diesel Loco Shed. Ds-8 No. 0536482408199, Dated 28.10.24. Hsn Code: 720429 - Gst 18%. Note To The Bidders 1) Bidders May Visit The Site Of The Material For Physical Inspection Of The Material And Loading Spot Also, In All Aspects Before Bidding In E Auction.2) Post Auction No Representation Shall Be Entertained.3) For Photos Of This Lot, Kindly Click On View Lot Image On Bottom Left Side. 4) Gas/chisel Cutting Is Permitted, If Required, For Easy Loading And Transportation Purpose, Only After Ensuring Sufficient Safety Measures Against Fire Hazards Etc To Avoid Any Mishap To Any Person, Railway Material Etc. Witnessing Officials To Ensure That The Lot Is Delivered As Per Lot Description 5) In Case Purchasers Require Usage Of Any Railway Assets/materials Such As Electricity/ Forklift Truck Etc. During The Process Of Delivery, They Are Required To Pay, The Prescribed Amount To Railways, As Directed By The Respective Custodian Of The Lot. 6) It Is The Responsibility Of The Purchaser/bidder To Return Excess Material, If Found During Gross Weighment, To The Nominated Premises Of The Custodian. 7) Clubbing Of The Lots, What So Ever, Is Not Permitted For Loading 8) Request For Fixation Of Delivery Point Should Be Invariably Raised In Ireps Online Only. Purchasers Are Requested To Make Use Of This Facility. No Representative Should Be Sent To The Office Of Sr.dmm/gtl For Collection Of Delivery Fixation Letter. As Soon As The Balance Sale Value Is Received By Railways Online, Delivery Order Will Be Issued Immediately, To Facilitate The Purchaser To Raise An Online Request For Fixation Of Delivery Point. 9) Railways Does Not Guarantee For Quality, Quantity Description Etc.

Description: Lot No.ws/s-yd/39/10/24-25/bg/cond./8w/coaches. Description- Iron And Steel Scrap Cutup Parts Of Bg Cond./8w/coaches With N.f Attachment Without Contents If Any. 1) Se 018108 Wgaccn 2) Se 018154 Wgsczac 3) Se 028131 Wgaccn 4) Se 011179 Wgaccn Nb: [1]. (a) All Coaches Are To Be Sold Without 16 Nos. Wheel Sets Complete Alongwith Roller Bearing ,03 Nos.serviceable Bogie Against Srl No. (1-02 Bogie Number. Wtaccw 83/14 And Wtaccw 51/14) And (3-01bogie Number 133390/13) With Complete Fittings,bio Tanks And Other Excluded Fittings As Per Latest Excluded Fitting List No.m2/c-19/excluded Fittings/coach/1271 Dt.13.09.2018. (b) The Coaches Are To Be Sold With 05 Nos.unserviceable Bogies Without Excluded Fittings. Against Srl No: 2- 02 Nos, Srl 3- 01 No And Srl 4- 02nos. Nb[2]: Special Condition For Rolling Stock- A) All Excluded Fittings Including Wheel Sets And Bogie, If Any, Are To Be Handed Over By The Purchaser At The Specified Location For Which The Purchaser Have To Arrange Labour/tools/ Equipment For Loading Of The Excluded Fittings From Cutting Site And Then Transport It To Specified Location By Their Own Arrangement/vehicle. They Have To Unload And Stack The Excluded Fittings By Their Own Arrangement Including Labours And Hand Over The Same To: - (i) Sse 27-28 Bogies, Coil Spring, Screw Coupling, Buffer Sets Etc. (ii) Sse-19,wheel Sets. (iii) Sse-30, Dv, Aux Reservoir, Cr, Common Pipe Bracket,alu. Water Tank, Bmbc, Etc. (iv) Sse-29 Bio Tank. (v) Sse-51 Battery, Fan, Alternator, Etc. (vi) Sse-55 (all Ac Items) To Hand Over To Concern Stock Holder With Clear Acknowledgement. The Delivery Of Cut Pieces Of Last 10 Percent Of Lot Size (subject To Minimum Of 01 No. Rolling Stock) Will Commence Only When All Excluded Fittings Arisen Out Of Sold Lot Has Been Successfully Handed Over To Custodian. B). Delivery Witnessing Official Will Ensure That Such Nil Value Items Has Been Cleared By Purchaser Before Taking Cut Pieces Of Last 10 Percent Of Lot Size (subject To Minimum Of 01 No. Rolling Stock) Delivery Witnessing Official Will Record Following Certificate On Sale Delivery Register "purchaser Clear All Nil Value Items Arisen After Cutting Of Sold Rolling Stock And There Is No Left Over Available At Cutting Site (c) The Rolling Stock May Either Be On The Cutting Line Or Grounded And May Or May Not Have Trolley/wheel Set Attached But The Purchaser Needs To Shift To Concerned Location As Advised By Concerned Sse. Nb:-[3] Serviceable 03 Nos. Of Bogies With Complete Fittings And 16 Nos. Wheel Sets Complete Along With Roller Bearing, Bio Tanks And Other Excluded Fittings Are To Be Handed Over By The Purchaser At Specified Location As Advised By Concerned Sse. Nb:[4] The Firm Shall Follow All Rules Regarding The Loading Of Vehicle As Per Rto /statuary Bodies Governed Time To Time. Railway Will Not Be Responsible Any Breach Of Rules During Loading / Transportation Done By The Purchaser. Nb:[5] Delivery Will Be Given In Numbers. Nb: [6] The Purchaser Is Required To Take Adequate Safety Measures So That No Railway Property Is Near Vicinity Of The Cutting Spot Is Damaged In Any Way. The Purchaser Will Be Responsible For Any Damage/fire Accident To The Railway Property Caused During Operation And Delivery. And The Purchaser Will Be Solely Responsible Of Any Loss Applied ( Railway Employee Or Any Other Person) Caused Due To Any Activities Involved While Dismantling /cutting, Of The Coaches, Transportation Loading And Unloading Of All Excluded Fittings Of The Coaches . Including Wheel Sets And Trolleys.

Description: Lot No.divn/nmp/40/11/24-25/bg/cond./8w/wgn. Description- Iron And Steel Scrap Cutup Parts Of Bg Cond./8w/wgn. Without Contents If Any. 1) Se 10079462890 Boxnm1 (nlb) 2) Sc 30098962072 Bcnm1 (nlb) 3) Sr 30068861503 Bcnm1 (nlb) 4) Nf 30058962067 Bcnm1 (nlb) 5) Nf 30058963231 Bcnm1 (nlb) 6) Cr 30018867456 Bcnm1 (nlb) 7) Er 30028968075 Bcnm1 (nlb) 8) Nr 30038960182 Bcnm1 (nlb) 9) Se 30078960302 Bcnm1 (wm) 10) Nfr 30058962760 Bcnm1 (wm) Nb: (1): I) Wagons Are To Be Sold Without 16 Nos. Nlb Trolleys Against Srl. No. 01 And 08. Ii) Wagons Are To Be Sold With 04 Nos Wm Trolleys Against Srl No. 09 And 10. Iii) All Wagons To Be Sold Without 40 Nos. Wheel Sets With Ctrb, Brake Cylinder Complete, Brake Gear Complete, Hand Brake Set Complete With Connecting Link, Bush, Seam Less Pipe With Fitting For Air Brake Equipment, Distributor Valve, Apm Valve, Sab, Coupler Body With Shank Wear Plate, Knuckle, Knuckle Pivot Pin, Coupler Yoke, Yoke Pin, Yoke Pin Support With Wear Plate, High Capacity Draft Gear With Draft Gear Follower, Etc And Other Excluded Fitting As Per Latest Excluded Fitting List * *excluded Fitting List Letter No. M2/c-19/e.ftg/ 1302 Dt.25.10.2023, Nb(2): Special Condition For Rolling Stock- A) All Excluded Fitting Along With Nlb Trolleys Are To Be Handed Over By The Purchaser To Sse/c&w/nmp At (nimpura) And Wheel Sets To Sse/44/nws/kgp Respectively Nominated Location Suggested By The Concerned Sse Respectively For Which They Have To Arrange Labour,tools & Equipment For Loading Of The Excluded Items From Cutting Site And Then Transport It To Nominated Location By Their Own Arrangement/vehicle. They Have To Unload And Stack The Excluded Materials By Their Own Arrangement Including Labour And Hand Over The Same To Concern Stock Holder With Clear Acknowledgement. (b) The Excluded Fittings Should Be Kept Away From The Cutting Lines And Adjacent Areas So That Future Grounding Of Rolling Stock Is Not Hampered In Any Way. The Delivery Of Cut Pieces Of Last 10 Percent Of Lot Size (subject To Minimum Of 01 No. Rolling Stock) Will Commence Only When All Excluded Fittings Arisen Out Of Sold Lot Has Been Successfully Handed Over To Custodian. (c) Delivery Witnessing Official Will Record Following Certificate On Sale Delivery Register. "purchaser Has Cleared All Nil Value Item Arisen After Cutting Of Sold Rolling Stock And There Is No Left Over Available At Cutting Site. (d) The Rolling Stock May Either Be On The Cutting Line Or Grounded And May Or May Not Have Trolleys/wheel Set Attached But The Purchaser Needs To Shift To Concerned Location As Advised By Concerned Sse. (e)the Purchaser Is Required To Take Adequate Safety Measures So That No Railway Property In Near Vicinity Of The Cutting Spot/ Loading Point And Unloading Point Is Damaged In Any Way. The Purchaser Will Be Responsible For Any Damage/fire Accident To The Railway Property Caused During Operation And Delivery, And Also He Will Be Solely Responsible Of Any Loss Applied (railway Employee Or Any Other Person) Caused Due To Any Activities Involved While Dismantling /cutting, Transportation Loading And Unloading Of All Excluded Fittings Of The Wagons. Including Wheel Sets And Trolleys. Nb- (3) The Firm Shall Follow All Rules Regarding The Loading Of Vehicle As Per Rto/statuary Body Governed Time To Time. Railway Will Not Be Responsible Any Breach Of Rule During Loading /transportation Done By The Purchaser. Nb: (4) Delivery Will Be Given In Numbers.

Description: Lot No.divn/nmp/41/11/24-25/bg/cond./8w/wgn. Description- Iron And Steel Scrap Cutup Parts Of Bg Cond./8w/wgn. Without Contents If Any. 1) Scr 10099460494 Boxnm1 (nlb) 2) Nf 30058966430 Bcnm1 (nlb) 3) Er 30028901614 Bcnm1 (nlb) 4) Cr 30018962618 Bcnm1 (nlb) 5) Cr 30018763444 Bcnm1 (nlb) 6) Wr 30088962105 Bcnm1 (wm) 7) Scr 30098961891 Bcnm1 (wm) 8)sc 30098961822 Bcnm1 (wm) 9) Se 30078961965 Bcnm1 (wm) Nb: (1): I) Wagons Are To Be Sold Without 10 Nos. Nlb Trolleys Against Srl. No. 01 And 05. Ii) Wagons Are To Be Sold With 08 Nos Wm Trolleys Against Srl No. 06 To 09. Iii) All Wagons To Be Sold Without 36 Nos. Wheel Sets With Ctrb, Brake Cylinder Complete, Brake Gear Complete, Hand Brake Set Complete With Connecting Link, Bush, Seam Less Pipe With Fitting For Air Brake Equipment, Distributor Valve, Apm Valve, Sab, Coupler Body With Shank Wear Plate, Knuckle, Knuckle Pivot Pin, Coupler Yoke, Yoke Pin, Yoke Pin Support With Wear Plate, High Capacity Draft Gear With Draft Gear Follower, Etc And Other Excluded Fitting As Per Latest Excluded Fitting List * *excluded Fitting List Letter No. M2/c-19/e.ftg/ 1302 Dt.25.10.2023, Nb(2): Special Condition For Rolling Stock- A) All Excluded Fitting Along With Nlb Trolleys Are To Be Handed Over By The Purchaser To Sse/c&w/nmp At (nimpura) And Wheel Sets To Sse/44/nws/kgp Respectively Nominated Location Suggested By The Concerned Sse Respectively For Which They Have To Arrange Labour,tools & Equipment For Loading Of The Excluded Items From Cutting Site And Then Transport It To Nominated Location By Their Own Arrangement/vehicle. They Have To Unload And Stack The Excluded Materials By Their Own Arrangement Including Labour And Hand Over The Same To Concern Stock Holder With Clear Acknowledgement. (b) The Excluded Fittings Should Be Kept Away From The Cutting Lines And Adjacent Areas So That Future Grounding Of Rolling Stock Is Not Hampered In Any Way. The Delivery Of Cut Pieces Of Last 10 Percent Of Lot Size (subject To Minimum Of 01 No. Rolling Stock) Will Commence Only When All Excluded Fittings Arisen Out Of Sold Lot Has Been Successfully Handed Over To Custodian. (c) Delivery Witnessing Official Will Record Following Certificate On Sale Delivery Register. "purchaser Has Cleared All Nil Value Item Arisen After Cutting Of Sold Rolling Stock And There Is No Left Over Available At Cutting Site. (d) The Rolling Stock May Either Be On The Cutting Line Or Grounded And May Or May Not Have Trolleys/wheel Set Attached But The Purchaser Needs To Shift To Concerned Location As Advised By Concerned Sse. (e)the Purchaser Is Required To Take Adequate Safety Measures So That No Railway Property In Near Vicinity Of The Cutting Spot/ Loading Point And Unloading Point Is Damaged In Any Way. The Purchaser Will Be Responsible For Any Damage/fire Accident To The Railway Property Caused During Operation And Delivery, And Also He Will Be Solely Responsible Of Any Loss Applied (railway Employee Or Any Other Person) Caused Due To Any Activities Involved While Dismantling /cutting, Transportation Loading And Unloading Of All Excluded Fittings Of The Wagons. Including Wheel Sets And Trolleys. Nb: (3) The Firm Shall Follow All Rules Regarding The Loading Of Vehicle As Per Rto/statuary Body Governed Time To Time. Railway Will Not Be Responsible Any Breach Of Rule During Loading /transportation Done By The Purchaser. Nb: (4) Delivery Will Be Given In Numbers.