Fabrication Tenders

Details: Description:- Supplying, Fabricating And Fixing Access Ladders, Inspection Platforms, Trolley Refuges etc., On Bridges With Structural Steel Conforming To Is:2062 Including Welding / Bolting, Priming painting With One Coat Of Ready Mixed Paint Of Zinc Chromate (is:104) With Dft Of 25-30 Microns followed By One Coat Of Zinc Chrome Red Oxide (is:2074) With Dft Of 25 Microns With All Material, labour, T&p As A Complete Job. Note: Painting Shall Be Paid Separately Under Relevant Item.

Details: Description:- Supplying, Fabricating And Fixing Access Ladders, Inspection Platforms, Trolley Refuges etc., On Bridges With Structural Steel Conforming To Is:2062 Including Welding / Bolting, Priming painting With One Coat Of Ready Mixed Paint Of Zinc Chromate (is:104) With Dft Of 25-30 Microns followed By One Coat Of Zinc Chrome Red Oxide (is:2074) With Dft Of 25 Microns With All Material, labour, T&p As A Complete Job. Note: Painting Shall Be Paid Separately Under Relevant Item.

Details: Description:- Supplying, Fabricating And Fixing Access Ladders, Inspection Platforms, Trolley Refuges etc., On Bridges With Structural Steel Conforming To Is:2062 Including Welding / Bolting, Priming painting With One Coat Of Ready Mixed Paint Of Zinc Chromate (is:104) With Dft Of 25-30 Microns followed By One Coat Of Zinc Chrome Red Oxide (is:2074) With Dft Of 25 Microns With All Material, labour, T&p As A Complete Job. Note: Painting Shall Be Paid Separately Under Relevant Item.

Description: CATEGORY: Lignocaine HCl 2 percent without Adrenaline 30 ml Inj , Lidocaine or Lignocaine HCL 2 percent with Adrenaline 1 ratio 80000 2 ml cart , Collagen with medicaments pack of 1 gm , Syringe hypodermic cartridge type needle presterlised disposable pkt of 100 size 25 mm , Syringe hypodermic cartridge type needle 35 mm long presterlised disposable pkt of 100 , Cavity liner Calcium Hydroxide based self cure radiopaque two paste system tube of not less than 10 gm two component materials , Gel for root canal preparation containing water soluble lubricant 15 to 17 percent EDTA Tube of 3 to 5 gm for dental use only , Abrasive mounted diamond Bur FG round point 8 mm , Abrasive mounted diamond Bur FG cylindrical 1 point 2 mm , Abrasive mounted diamond Bur FG cylindrical 1 point 4 mm , Abrasive mounted diamond bur FG round 1 point 2 mm , Bur tungsten carbide Round 8 FG , Bur taper fissure cross cut tungsten carbide for straight hand piece 701 , Bur taper fissure cross cut tungsten carbide for straight hand piece 702 , Articulating paper , Shofu super snap mini kit CA finishing polishing disc , waldent protaper gold hand files pack of six files SX to F3 21mm length with corresponding GP and paperpoints complete kit , Set of six Rotary NiTi tapered files 25mm length with corresponding gutta percha points and paper points set complete kit , Dentsply endo Z tungsten carbide bur , Waldent lentulo spiral paste carrier 25 mm pack of 4 , RC Solve GP solvent liquid , Waldent 17 percent EDTA liquid solution 60ml , Calcium hydroxide with idoform root canal dressing and filling paste in syringe 2 to 4 gm , Gates Glidden drill sizes 1 to 6 length 29mm , 2 percent Chlorhexidine solution for root canal irrigation 100ml , Broach nerve canal barbed assorted size pkt of 12 , GIC Type 1 Powder and liq luting , GIC Type 2 Powder and liq Restorative , Root canal sealer paste for obturation containing two tubes oblique preloaded syringes , Disposable shoe covers for dispenser , Hand piece lubricant spray bott of 500 ml , GDC Mirror mouth top rhodium coated anti fog , Intraoral photographic mirror set of 3 with contraster , Patient bib plastic , Cheek retractor Plastic , Denture cleaner tablets pack of 30 to 40 tablets , Denture adhesive powder Bottle 10 to 15 Gm , Pre fabricated composite ready made veneers 0 point 3 mm to 0 point 5 mm assorted kit of 55065 veneers , Dental stone Pkt of 1 kg , Die Stone pkt of 1 kg , In Office Dental Bleaching kit complete , Heat cure Base acrylic resin powder pink shade bott of 450 gm and acrylic resin liquid bott of 227 point 3 ml , Heat cure Base acrylic resin powder clear shade bott of 450 gm and acrylic resin liquid bott of 227 point 3 ml , Self cure scrylic powder pink shade bottle of 110 gm with rapid repair liquid 110 ml , Self cure acrylic powder clear shade bottle of 110 gm with self cure acrylic liquid 110 ml , polishing Wheel wool large , Pumice powder superfine bag of 1 kg , Bur tungsten carbide HP Bur for acrylic resin cross cut length 52 mm diameter 6mm , Sticky Wax Box of 10 sticks , Modelling wax , Alginate impression material 300 to 500 gm Pkt , BIS Acrylic Resin Based provisional Kit for temporary crown work , Green Stick Pack of 10 , Shofu Crown preparation Kit containing 14 to 16 multilayered diamond burs , Base plate wax upper and lower pack of 12

Description: CATEGORY: with louver shutter , Pendent holder made of bakelite , LCs complete set with all accessories , Elect earthing set with complete set , Hot water boiler of capacity 500Ltrs , PUF Insulated 55mm thick water tank 1000 Ltrs with GI flange , Water staging platform made of MS Angle of size 40x40x6 mm , PPR Pipe 20mm dia , PPR Pipe 25mm , PPR Tee 20mm , PPR Tee 25mm , PPR Elbow 90 degree 20 mm , PPR Elbow 25mm , PPR Elbow 90 degree 25mm , PPR male threaded socket 20 to15 mm dia , PPR Female threaded socket 20 to15 mm dia , PPR Female threaded elbow 20 to15 mm dia , PPR Male threaded elbow 20 to15 mm dia , PPR socket 20mm dia , PPR socket 25mm dia , PPR Union 20mm , PPR Union 25mm , PPR reducer 25x20mm , PPR reducer Tee 25x20mm , Bib tap brass chromium plated sutable for 15mm PPR water supply line , PPR Balve Valve Light Weight Brass 25 mm , PPR Balve Valve Light Weight Brass 20 mm , PPR Balve Valve Light Weight Brass 15 mm , PVC Clip for PPR pipe 25mm dia , PVC Clip for PPR pipe 20mm dia , PPR reducer Elbow 25x20mm , PPR Male threaded Tee 25x20mm , Pillar cock brass chomium plated , Taeflon tape , PVC Float value heavy duty 25mm dia suitable for PPR pipe , 25mm PP to R Tank Connector , Pre fabricated septic tank of 2000 ltrs capacity and Septic tank shall be anchored with hold , Prefabricated soakage pit of 1000 ltr capacity and Soakge pit shall be anchored with hold fast , PVC Pipe 4 inch dia 6 mtr long heavy duty type A having 5 kg pressure oblique sqcm , PVC Socket 4 inch dia , PVC Elbow 4 inch , PVC Tee 4 inch , PVC Floor Trap 4 inch dia with grating 4 inch outlet , IWC stainless steel PVC P Trap inlet 4 inch dia with 4 inch outlet , PVC Flusing cistern 10 ltrs capacity with PVC Connection and waste pipe Angle and PVC pipe , Stop Cock CP 25 mm , Wash Hand Basin 500x400mm Steel with Waste pipe and Coupling alongwith 02 Nos CI Bracket with screw PVC Connection 450mm long , Vitreous China bowl Urinal flat back white of size 465x355x265 mm , Looking Mirror size 450 x 600 x 5 point 5 mm thick with 4 mm ply backing and aluminium L Section frame , Stainless steel peg stay contains 4 hooks fancy type , Soap dishes stainless steel size 10cmx12cm , Towel Rail CP 600mm , Plaster trowel with woodwen handle , Plumb bob iron , Galvanised Iron Pan Mortar Tasla 18 Gauge 16 inch dia minimum weight 1 Kg , Double end spanner for 16 mm dia nuts and bolts , Showel Square Nose 14 gauge TATA high carbon steel , Fish line , Hammer ball pine 1Kg , Electric Tile Cutting Machine with 5 Nos inter changeable blades , Measuring Tape 3 Mtr , GI Sheet cutter scissors , Transperant pipe 5 mm dia bore for water leveling , Multipurpose Non Slip Rubber Reusable Gloves for scrubbing cleaning brick work OG oblique Black , Full Body safety harness light weight , Gum boots for snow fall area , Screw driver , Portable drill machine with 06 Nos 8mm dia bits , Industrial Safety Helmet

Details: Description:- Supply And Installation Of Pre Fabricated Modular Operation Theatre With 50mm Thick ss Puff Panel Of 0.6mm Ss 304 Sheet On Both Sides. Filling Of All Joints And Cavities With Epoxy Filler and Sanded Flush To Provide A Seamless Finish. Applied With Minimum Three Coats Of Antibacterial & antifungal Paint, Wall Glaze Or Equivalent To A Minimum Dry Film Thickness Of 300 Microns Having overlap Floor Covering, Ceiling System And Door Frames By 25mm To Provide A Continuous Sealed surface.

Details: CATEGORY: customised executive high cushioned seating arrangement , customised executive works station with ERU unit and required accessories storage , wooden sculptured cap stand , leatherite cushioned visitor seating arrangement with ss base , Fabricated wardrobe with enclose and locking arrangement , customised display with glass shelves and transparent tuffened glass enclosure , devider with tuffened glass , weather proof customised roof with step design and aluminium fixture , tuffened glass enclosure with acidic works and required like , strechered weather proof coat for interior with fine emulsion finished

Details: Running Contract For 10125 Mm Over-riding Curved Switches For 60 Kg 1 In 12 T/out As Per Rdso Drg .no. T-4219, Alt-9 And Conforming To Irs Specification No.t-10-2023, Fabricated Switches Should Be Complete Along With Parts/fittings As Per Rdso Drawing No. T-4218 (alt-8) &t-4219 (alt-9) , Parts/fittings List Attached As Annexure- C (latest Alteration To Rdso Drawing And Latest Alteration/revision/corrigendum/amendment To Irs Specification/technical Specification As Applicable )

Details: CATEGORY: Masonry Work for Concealing All Wiring and ReLocating All Switch , Extension Of New Concealed Wiring laying in PVC concealed , Fitments Of new modular Switch Boards , Fitment Of New LED Power Saver Light , Fitment of Floor Tiles , Closing Of Existing Entrance Door , Acoustic Board , Wall And Ceiling Painting Work , Fitment of New Glass Door , Wall Acoustic Panelling , Customized fabricated serving counter , Working desk with seating cum storage , Toughen glass , Wooden or Marble Top Dining Table , Wooden Heavy Duty Ergonomic Seating Arrangements

Details: Description:- Supply Installation Testing & Commissioning Of Fabricated Container To Be Delivered To site To Suite The Complete Pump Room Facility. It Is Capable To Accommodate Atleast Two Sets Pumps, (1 Set Means Pump Having Capacity 40 Hp Including 3 Nos Of Motor) Electrical Control Panels And Allied fittings With Forced Air Circulating By Exhaust Fans & Electrical Fittings . Size Of Container Required Is 8 mtr X 3.5 Mtr X 3 Mtrs. All Electrical Points, Wiring And Switch Board Will Also Be Fitted By The contractor.