Fabrication Tenders

Description: CATEGORY: Cement OPC 43 Grade packed in HDPE bag each 50 Kg wt conforming to IS 8112-1989 Make-Birla Gold,Ambuja,Ultratech, ACC,JK or Dalmia under Job No 2504 AGS PD as per store list att , Stone boulder 9 inch to 12 inch , Coarse Aggregate 40 to 63mm , Coarse sand free from vegetation , Coarse Aggregate 20mm graded , Coarse Aggregate 40mm graded , Mild steel Bar of size 6 to 8 mm dia conforming to IS 432 Part I 1982 Make- Tata,Sail,JSW , Water proofing compund conforming to IS 2645-2003 Make- Pidilite,Dr Fixit,Fevicol , Quick setting compound Make- Pidiite,Quick Fix,Fevicol , PBS Roll 20m Long , Width of 0.9Mtr ISI Marked with Min weight of 34 Kgs oblique Roll , GI binding wire TATA,Sail,JSW , Cement based paint Snowcem Make-Berger,Asian,Nerolac , Slack lime , Painting brush 4 inch ISI Marked , HDPE sand Bags khaki colour of size 30inch x 15inch inside laminated interlocking stiched, weight of the each bag should not be less then 42-45 gms oblique Bag , Anti corrosive Red Oxide zinc chromate primer conforming to IS-5-2004 Make-Asian,Berger,Neroloc , Synthetic paint enamelled OG conforming to IS 5-2004 Make- Asian,Berger,Nerolac , Thinner Make-Nerolac,Berger,Asian , SRT 2440 x 613 x 180 , 2 mm thick MS Sheet Hot Rolled Steel with nuts and bolts incl One coat of Red Oxide Make- TATA, SAIL,JSW , ISMB hot rolled 200x100mm and 4 mtr long Make-TATA,SAIL,JSW , Prefeb mild steel door of size 750x 1800mm double shutter, outer frame made out of ISA 40x 40x6mm and door shutter frame of Make-Tata,Sail,JSW as per store list , Mild steel Bar of size 6 to 8 mm dia conforming to IS 432 Part I 1982 Make-Tata,Sail,JSW , Loop Holes 780 x 300 mm Make-TATA, SAIL,JSW , Loop Holes 1000 x 300 mm Make-TATA, SAIL,JSW , Loop Holes 1250 x 300 mm Make-TATA, SAIL,JSW , Ventilator Steel 600x450 mm will be fabricated using ISA 35x35x6mm for outer frame and ISA 30x30x3mm Make-TATA, SAIL,JSW as per store list , Wooden planks for shuttering IInd class wood of size 3.0 x 0.30 x 0.026m , Wooden scantling various size , Nails various size , Air terminal single pointed aluminium rod 12mm dia and 300mm long , Testing point terminal block make of Gun metal and phosphorus bronze size 75x75x25mm drilled and screwed including 3 Nos 8mm dia 25mmas per store list , Aluminium strips 25x3mm. , Galvanised iron strip 32x6mm. , Funnel fitted with 20mm dia GI Pipe 1.5m long Make-Jindal, Tata, Kalinga , Earthing Plate 600x600x6mm GI steel suitable for GI strip fittings, drilled with two nos holes for 6 mm dia near one side , CI earth pit cover of size 300x300x6mm with angle iron of size 20x20x3mm thick with MS frame , Insulating PVC block 75x75x30mm with insulating clamp nut and bolt Make- Presto,Polycab, Finolex , Charcoal , Salt

Description: CATEGORY: Cement OPC 43 Grade packed in HDPE bag each 50 Kg wt conforming to IS 8112 1989 Make Birla Gold or Ambuja or Ultratech or ACC or JKJ Dalmia , Stone boulder 9inch to 12inch , Coarse Aggregate 40 to 63mm , Coarse sand free from vegetation , Coarse Aggregate 20mm graded . , Coarse Aggregate 40mm graded , Mild Steel Bars of size 6 to 8 mm dia Conform to IS 432 Part 1 1982 TMT Bar Make TATA or SAIL or JSW , Water proofing compund conforming to IS 2645 2003 Make Pidilite or Dr Fixit or Fevicol , PBS Roll 20m Long Width of 0 point 9Mtr ISI Marked with Min weight of 34 Kgs per Roll , GI binding wire TATA or SAIL or JSW , Cement base paint Scowcem Make Berger or Asian or Nerolac , Slack Lime , Painting brush 4inch ISI Marked , HDPE Sand bags khaki colour of size 30inchx15inch inside laminated interlocking stiched weight of the each bag as per TS , Anti corrosive red oxide zinc chromate primer confirming to IS 5 2004 Make Berger or Asian or Nerolac , Synthetic Paint enamelled OG confirming to IS 5 2004 Make Berger or Asian or Nerolac , Thinner Make Nerolac or Berger or Asian , SRT 2440 x 613 x 180 2 mm thick MS Sheet Hot Rolled Steel with nuts and bolts incl One coat of Red Oxide Make TATA or SAIL or JSW , SRT 1840 x 613 x 180 2 mm thick MS Sheet Hot Rolled Steel with nuts bolts incl One coat of Red Oxide Make TATA or SAIL or JSW , ISMB hot rolled MS 200 x 100 4M Make TATA or SAIL or JSW , Prefab mild steel door of size 750x1800mm double shutter outer frame made out of ISA 40x40x6mm as per TS , Mild Steel Bars of size 6 to 10 mm and above dia conforming to IS 432 Part I 1982 Make TATA or SAIL or JSW , Loop Holes 780 x 300 mm Make TATA or SAIL or JSW , Loop Holes 1000 x 300 mm Make TATA or SAIL or JSW , Loop Holes 1250 x 350 mm Make TATA or SAIL or JSW , Ventilator steel 600x450mm will be fabricated using ISA 35x35x6mm for outer frame and ISA 30x30x3mm as per TS , Wooden plank for shuttering II class wood of size 3 point 0 x0 point 3 x0 point 026 m , Wooden Scantling various size , Nails various sizes , Air terminatoin single pointed aluminium rod 12mm dia and 300mm long , Testing point terminal block made of gun metal phosphorus bronze size 75x75x25mm drilled and screwed as per TS , Aluminium strips 25x3mm , Galvanised iron strip 32x6mm , Funnel fitted with 20mm dia GI Pipe 1 point 5m long Make Jindal or Tata or Kalinga , Earthing Plate 600x600x6mm GI steel suitable for GI strip fittings drilled with two nos holes for 6 mm dia near one side , CI earth pit cover of size 300x300x6mm with angle of size 20x20x3mm thick with MS frame , Insulating PVC block 75x75x30 mm with insulating clamp nut bolt Make Presto or Polycab or Finolex , Charcoal , Salt

Details: Material At Saswad Plant: Acr Project Division : Scrap Old Used Ms Material Consisting Various Sizes Seamless, Erw Pipes, Pipe Fittings, Valves, Hardware, Nut, Bolt, Stud, Brackets, Ms/gi Cable Trayes, Fabricated Ms Structure & Ms Pieces-8 Mt, Old Used Scrap Stainless Steel Pipes/tubes, Pipe Fittings, Manifold Valves, Gland, Ss Net (jali), Hardware And Miscellaneous Ss Spares Parts-3 Mt, Old Discarded Copper Cable Single Pvc Insulated 1.5 Mm2 (2 Bundles & Loose)=1 Lot, Process Gas System Division: Control Valves Dia Frame Emerson Make-21 Nos, Ache Lower (aluminium Jali)-1 Lot, Flexpro Flame Proof, Weatherproof, Aviation, Warning Light 1x24 Vdc Red Led Lamps With Fixtures (28 Nos)-1 Lot, Ms Fabricated Engin Stands-37 Nos, Basket Strainer 2x300 For Gas Service G-2552-10 Bst 001-39 Nos Etc.

Details: Description:- Supplying, Fabricating And Fixing Access Ladders, Inspection Platforms, Trolley Refuges etc., On Bridges With Structural Steel Conforming To Is:2062 Including Welding / Bolting, Priming painting With One Coat Of Ready Mixed Paint Of Zinc Chromate (is:104) With Dft Of 25-30 Microns followed By One Coat Of Zinc Chrome Red Oxide (is:2074) With Dft Of 25 Microns With All Material, labour, T&p As A Complete Job. Note: Painting Shall Be Paid Separately Under Relevant Item.

Details: Withdrawal, Renovation & Re-Installation of 3 Nos Flap Shutter Gate at the upstream of the main outfall of Fowl Water & 3 Nos of Draw Shutter Gate (Pen Stock) Gate at the downstream of the main outfall of Raw Water, Manufacture of Fabricate M. S. Gate Fitted with Channel Frame & “J” Rubber liner as “DUMMY” Gate for future maintenance at Lock Gate beside BSF Camp located at Ward No-4 under Baranagar Municipality Area (Under State Fund).

Details: Description:- Supplying, Fabricating And Fixing Access Ladders, Inspection Platforms, Trolley Refuges etc., On Bridges With Structural Steel Conforming To Is:2062 Including Welding / Bolting, Priming painting With One Coat Of Ready Mixed Paint Of Zinc Chromate (is:104) With Dft Of 25-30 Microns followed By One Coat Of Zinc Chrome Red Oxide (is:2074) With Dft Of 25 Microns With All Material, labour, T&p As A Complete Job. Note: Painting Shall Be Paid Separately Under Relevant Item.

Details: Description:- Supplying, Fabricating And Fixing Access Ladders, Inspection Platforms, Trolley Refuges etc., On Bridges With Structural Steel Conforming To Is:2062 Including Welding / Bolting, Priming painting With One Coat Of Ready Mixed Paint Of Zinc Chromate (is:104) With Dft Of 25-30 Microns followed By One Coat Of Zinc Chrome Red Oxide (is:2074) With Dft Of 25 Microns With All Material, labour, T&p As A Complete Job. Note: Painting Shall Be Paid Separately Under Relevant Item.

Details: Description:- Supplying, Fabricating And Fixing Access Ladders, Inspection Platforms, Trolley Refuges etc., On Bridges With Structural Steel Conforming To Is:2062 Including Welding / Bolting, Priming painting With One Coat Of Ready Mixed Paint Of Zinc Chromate (is:104) With Dft Of 25-30 Microns followed By One Coat Of Zinc Chrome Red Oxide (is:2074) With Dft Of 25 Microns With All Material, labour, T&p As A Complete Job. Note: Painting Shall Be Paid Separately Under Relevant Item.

Details: Description:- Supplying, Fabricating And Fixing Access Ladders, Inspection Platforms, Trolley Refuges etc., On Bridges With Structural Steel Conforming To Is:2062 Including Welding / Bolting, Priming painting With One Coat Of Ready Mixed Paint Of Zinc Chromate (is:104) With Dft Of 25-30 Microns followed By One Coat Of Zinc Chrome Red Oxide (is:2074) With Dft Of 25 Microns With All Material, labour, T&p As A Complete Job. Note: Painting Shall Be Paid Separately Under Relevant Item.

Details: Description:- Supplying, Fabricating And Fixing Access Ladders, Inspection Platforms, Trolley Refuges etc., On Bridges With Structural Steel Conforming To Is:2062 Including Welding / Bolting, Priming painting With One Coat Of Ready Mixed Paint Of Zinc Chromate (is:104) With Dft Of 25-30 Microns followed By One Coat Of Zinc Chrome Red Oxide (is:2074) With Dft Of 25 Microns With All Material, labour, T&p As A Complete Job. Note: Painting Shall Be Paid Separately Under Relevant Item.