Fabrication Tenders

Description: 29210010 clamps Cat No.s/9/0013 As Per Drg.no. 29210010 Alt D Specn: Clw Spec. No. Clw/ms/3/059 Alt- 6 [ Warranty Period: 30 Months After The Date Of Delivery ] [quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total Po Value Variation Permitted: Max 8 L acs ] ] consignee General Stores Depot, Blw Uttar Pradesh 54.00 Set uvam Item Ref. ( Item Id :- 2100644 - Ms Fabricated Items (small) / Category - Structural- group-iii-- Door Latch Assly, Channel Unistrut, Din Rails, Clips-pneumatic Items, Clamps- pneumatic Items, Protection Plate Assembly For Wag-9/wap-7 (set Of Protection Plate for Wag-9/wap-7), Shim And Pad (06 Items) , Set Of Accessory For Hand Brake arrangement For Wap-7 Loco. Hinge For Wag-9/wap-7 Loco )

Description: Condemned Stainless Steel Non Magnetic Grade Small Pieces Scrap Available In The Containers Consisting Of Off-cuts Of Sheets, Plates And Trough Floors, Remnants Of Punching Of All Sorts/sizes/shapes, Semi Finished Items, Trough Floor Pieces, Ss Fabricated Scrap, Strips, Small Pieces, Angles, Ss Utensils, Ss Channels Of All Sorts/sizes/shapes, Coach Components, Shop Rejected Items. Negligible Quantity Of Ss Magnetic Grade Items. Any Other Non-magnetic Ss Items Which Is Unusable To Icf With Or Without Small Ferrous/magnetic Grade Ss Attachments. Location: - 1). Bin No: 10. Note.- 1. There Is No Guarantee For Quality And Quantity Of The Material Available In The Lot. 2. Jcb/crane/flt Permitted For Loading. 3. Gst 18%, Any Variation In Tax Or Any Other Extra Charges As Imposed By Central Or State Government Will Be To Buyers Account. Ul No:- 09 9841 7551 1314 Hsn Code:720421.

Description: 29210010 clamps Cat No.s/9/0013 As Per Drg.no. 29210010 Alt D Specn: Clw Spec. No. Clw/ms/3/059 Alt- 6 [ Warranty Period: 30 Months After The Date Of Delivery ] [quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total Po Value Variation Permitted: Max 8 L acs ] ] consignee General Stores Depot, Blw Uttar Pradesh 96.00 Set uvam Item Ref. ( Item Id :- 2100644 - Ms Fabricated Items (small) / Category - Structural- group-iii-- Door Latch Assly, Channel Unistrut, Din Rails, Clips-pneumatic Items, Clamps- pneumatic Items, Protection Plate Assembly For Wag-9/wap-7 (set Of Protection Plate for Wag-9/wap-7), Shim And Pad (06 Items) , Set Of Accessory For Hand Brake arrangement For Wap-7 Loco. Hinge For Wag-9/wap-7 Loco )

Description: Ms Melting Scrap Consisting Of- Ms Plate Of Different Sizes & Thickness, Ms Jalli, Ms Angles/ Rod/channel/strip, Local Made Trolley With Wheels/bearing, Broken Ms Almirah, Local Made Ms Fabricated Items In Broken Condition, Broken Ss Scrap If Any, Cbc Items, Buffers, Operating Handle, Bracket, Released Scrap Loco Hood, Compressor Items, Released Domes, End Shields, Impellers Of Auxiliary Motors, Dbr Body, Base Frame Of Various Auxiliary Motors, Connecting Strip, Brake Hanger, Spring Seat, Axle Boxes, Spring Holder Plate Assly, Brake Cylinder, Brake Shoe, Tie Rod, Traction Link, Tbu/pbu Units, U Clamp, Released Nut, Bolt, Liners, Pins And Bushes, Washer, Liners, Wire Rope, Other Misc Ms Scrap Released From Electric Locomotives. Note- 1) Any Rail Or Other N/f Items Not Pertaining To Lot, Will Be Retained By Railways. 2) Cutting Will Be Allowed For Easy Loading.

Description: 29210136 clamp & Pad Cat No.s/9/0046 C&d No.t304/126 As Per Drg.no. 29210136 Alt B [ Warranty period: 30 Months After The Date Of Delivery ] [quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total Po Value Variation Permitted: Max 8 L acs ] ] consignee General Stores Depot, Blw Uttar Pradesh 76.00 Set uvam Item Ref. ( Item Id :- 2100644 - Ms Fabricated Items (small) / Category - Structural- group-iii-- Door Latch Assly, Channel Unistrut, Din Rails, Clips-pneumatic Items, Clamps- pneumatic Items, Protection Plate Assembly For Wag-9/wap-7 (set Of Protection Plate for Wag-9/wap-7), Shim And Pad (06 Items) , Set Of Accessory For Hand Brake arrangement For Wap-7 Loco. Hinge For Wag-9/wap-7 Loco )

Description: Scrap Ms Includes Condemned Surface Traverser (traversomet) Equipment, Made From Angle Iron, Channels, Girders, And Other Materials, In A Fabricated Frame, Formerly Used For Handling Railway Coaches. The Equipment Has A Capacity Of 80 Tonnes. It Is No Longer Fit For Railway Use. Conditions: - (1) The Lot Will Be Sold On An "as Is, Where Is" Basis, And The Lot Weight Is Estimated. (2) If The Quantity Of Material Exceeds The Estimated Weight, The Purchaser Must Take Delivery Of The Additional Material After Making The Required Payment As Per The Sold Lot Conditions. (3) Bidders Are Advised To Physically Inspect The Material Before Placing A Bid (4) The Actual Custodian Is Sse/millwright/mws. Remaks: - Cutting Is Allowed, But Any Damage Or Loss That Occurs During The Cutting Process Will Be Charged To The Purchaser. Location: - West Side Of Shell Shop In Mws Lbpl, Dbaw, Gst-18%, Tcs -1% , Hsn Code-72045000, Allocation-20714208

Description: Scrap Comp. Of Heavy Structure Including, Railway Pull Structure, Hospital -beds,different Type Of Door's,battery Box,gates,sheets,fabricated Tower Cut Pcs, Window Grill,panels, Vaccum Cylinder, Hand-wheel-barrow, Almirah, Tank,pipes,electrical Empty Panel,compressor,window-frame,cut Pcs Of Coach Door,angles,channels, Benches, Tie-bar,water Tank,bridge Cutting,coach Door,wheel Barrow, Almirah, Foot Steps, Boxes,wire Rope,pieces Of Furnance & Cutting Parts Of C&w With Or W/o Attachemnts, Us & Ur. Loc:- Lying At Near 40 Mt Weigh Bridge Sre Side In Scrap Yard Judw. Remarks:- [1] Loading By Purchaser. [2] Cutting Allowed For Loading Purpose. [3] Cutting Will Be Allowed After Following All The Fire Prevention Related Instructions Of Jagadhri Depot. Note:- [1].nfs Items Will Be Taken Back If Found In Lot.

Description: Scrap Loco Parts Consisting Of Misc Components /fittings Of Ms And Ci Like Cylindrical Heads, Pinion, Dummy Shaft, End Frame, Bhrr, End Shield, Inspection Cover, Deflector, Screw Coupling, Draft Gear, Buffer, Yoke, Servo Motor, Levers, Liners, Connecting Rods, , Gear Wheel, Gear Case Cover, Rods, Bearing Shells, Bearing, Ms Plate, Filter, Filter Body Cover, Nut-bolts, Cbc Knuckles, Pole Shoe, Spring Sheet, Brake Hanger, Comp. Beam, Link, Washer, , Axle Box, Buffer Plungers, Link Coil Spring, Suspension Tube, Fabricated Angle, Valves Released From Cylinder Head, Msu/axle Box Housing, Governors, Brackets, Master Controller Parts, Exhaust Manifold, Nozzle Rings (outer/ Inner), Wiper Motors Clips Etc. And Other Misc Components/fittings Of Various Locos In Mixed Up Condition With Or Without Nf And Ci And Other Attachments.

Description: Ms Fabricating Scrap : Actual Lot No. 03122504 1029 . Pl No. 98050047 (15) (hsn Code 72044900--gst 18%-on Fcm Basis) Scrap Of Cond. & Unserviceable Ms Fabricating Scrap Of Location Boxes, Different Sizes Bcm Screens Cut Pcs Of Sheets Eolb Hinges, Molb Boom Pcs, Tljbs, Eolb Pedestal Stands, Eolb Meeting Posts, Power Junction Boxes, Iron Stand, Tubs, Pallets, Assembled Boxes Earth Bonds Signal Ladders Rods, Steel Racks, Revolving Chair, Operator Seats, Junction Boxes, Cut Pcs Angles Channels Cls Panel, Ms Clamps, S Type Chair Cut Pcs Office S Type Chairs, Revolving Chairs, Conference Table, Lecturer Table, Office Table, Duel Desks, 3 Seated Platform Chairs Signal Ladders, Shutters With Flat Tube Light Frames J Hooks Different Sizes Of Sheets And Pipes Doors Shutters Seat Frames Chairs Eolb Pedestals, Tljb Boxes, Shutters, Monkey Climber Devices .cupboards Ms Fencings, Tool Boxes, Operator Seats, Panel Boards Mvmt Ducts Signal Ladders, Guard Seats, Cls Posts, Spring Planks, Meshes, Panto Cut Pcs, Stools, Cots, Structures And Other Misc. Items Of Wagon, S&t, Loco, Emu, Ttm And Electrical Full Or Broken With Or Without Attachments. This Material Available At Lot No. 1035 .location Road No.4(gas Cutting Should Be Minimum Depends On Material Size And Weight, Maximum 6 Cuts Permitted Only) (image Attached). (note: 1. If Any Ss/ Corten Steel & Non-ferrous Items Found During Cutting / Loading / Delivery Shall Be Return To The Railways By The Purchaser 2. In Case Of Clubbed Lots, Purchaser Has To Clear The Lots In The Sequence As Mentioned In The Lot Description And No Deviation Is Accepted. 3. No Picking And Choosing Of Material Is Permitted While Taking Delivery ).

Description: Ms Fabricating Scrap : Actual Lot No. 03122505 0638 . Pl No. 98050047 (15) (hsn Code 72044900--gst 18%-on Fcm Basis) Scrap Of Cond. & Unserviceable Ms Fabricating Scrap Of Location Boxes, Different Sizes Bcm Screens Cut Pcs Of Sheets Eolb Hinges, Molb Boom Pcs, Tljbs, Eolb Pedestal Stands, Eolb Meeting Posts, Power Junction Boxes, Rotary Ladder Trolley, Iron Stand, Tubs, Pallets, Assembled Boxes Earth Bonds Signal Ladders Rods, Steel Racks, Revolving Chair, Operator Seats, Junction Boxes, Cut Pcs Angles Channels Cls Panel, Ms Clamps, S Type Chair Cut Pcs Office S Type Chairs, Revolving Chairs, Conference Table, Lecturer Table, Office Table, Duel Desks, Cls Ladders Battery Stands, Meshes, Boxes J Hooks Different Sizes Of Sheets And Pipes Doors Shutters Seat Frames Chairs Eolb Pedestals, Tljb Boxes, Shutters, Cupboards Ms Fencings, Tool Boxes, Operator Seats, Guard Seats Panel Boards Mvmt Ducts Trolley Wheels S Iron Safe, Ttm Partition Wall Cut Pcs Doors Shutters, Ladders Guard Seats Krone Boxes Empty Touch Screen Kiosk, Krone Boxes And Other Misc. Items Of Wagon, S&t, Loco, Emu, Ttm And Electrical Full Or Broken With Or Without Attachments. This Material Available At Lot No. 636a .location Road No.3 (gas Cutting Should Be Minimum Depends On Material Size And Weight, Maximum 6 Cuts Permitted Only) (image Attached). (note: 1. If Any Ss Steel & Non-ferrous Items Found During Cutting / Loading / Delivery Shall Be Return To The Railways By The Purchaser 2. In Case Of Clubbed Lots, Purchaser Has To Clear The Lots In The Sequence As Mentioned In The Lot Description And No Deviation Is Accepted. 3. No Picking And Choosing Of Material Is Permitted While Taking Delivery