Fabrication Tenders

Details: Running Contract For 10125 Mm Over-riding Curved Switches For 60 Kg 1 In 12 T/out As Per Rdso Drg .no. T-4219, Alt-9 And Conforming To Irs Specification No.t-10-2023, Fabricated Switches Should Be Complete Along With Parts/fittings As Per Rdso Drawing No. T-4218 (alt-8) &t-4219 (alt-9) , Parts/fittings List Attached As Annexure- C (latest Alteration To Rdso Drawing And Latest Alteration/revision/corrigendum/amendment To Irs Specification/technical Specification As Applicable )

Details: CATEGORY: Masonry Work for Concealing All Wiring and ReLocating All Switch , Extension Of New Concealed Wiring laying in PVC concealed , Fitments Of new modular Switch Boards , Fitment Of New LED Power Saver Light , Fitment of Floor Tiles , Closing Of Existing Entrance Door , Acoustic Board , Wall And Ceiling Painting Work , Fitment of New Glass Door , Wall Acoustic Panelling , Customized fabricated serving counter , Working desk with seating cum storage , Toughen glass , Wooden or Marble Top Dining Table , Wooden Heavy Duty Ergonomic Seating Arrangements

Details: Description:- Supply Installation Testing & Commissioning Of Fabricated Container To Be Delivered To site To Suite The Complete Pump Room Facility. It Is Capable To Accommodate Atleast Two Sets Pumps, (1 Set Means Pump Having Capacity 40 Hp Including 3 Nos Of Motor) Electrical Control Panels And Allied fittings With Forced Air Circulating By Exhaust Fans & Electrical Fittings . Size Of Container Required Is 8 mtr X 3.5 Mtr X 3 Mtrs. All Electrical Points, Wiring And Switch Board Will Also Be Fitted By The contractor.

Description: Pl No.98050126] Scrap Cond./released/unserviceable Ms Scrap Such As Cbc Coupler Bodies, Angels Channels, Signal Rods, Dash Pot, Yokes, Draft Gears Sets, Ms Sheets, Winch For Lc Gate, Lever Lock, Lever Rods, Pull Rods, Suspension Tube, Housing Axle Bearing, Chequered Plates, Cbc Operating Handle, Rel Hook, Anti Roll Bracket, Dradger Drum, Ms Stool, Centring Disc, Ms Liners, Center Pivot Washer, Brake Shoe Head, Center Pivot Ring, Side Frame Key, Adopter Narrow Jaw, Anti Roll Bar, Bolts & Nuts, Wear Plate, Adopter Wide Jaw, Suspension Rods ,equalizing Stay, Erc Clips, Wagon Doors, Rail Flange, Chain Hook,hydraulic Motor, Pipe Fittings, Rotary Shield With Bearings, Sab Parts, Ls Beam, Hangers, Brake Levers, Brake Hangers, Ms Plates Of Elastomeric Pad, Adapter Broken, Center Pivot Top, Anvil, Workdout Sab, Gib Crane, Bracket, Plate Screws, Knuckle, Fabricated Test Rig, Gear Wheel, Anchor Link, Brake Beam, Axle Box Housing, Bearing Plates, Rivette, Chirr Plate, Ms Bed Plate, Ms Guage Tie Plate, Structure Bar, Ms Tie Plates, Slide Chaires, Brake Shoe Head, Locking Plate, Long Pull Rod, Operating Handle, Cbc Lock, Cbc Yoke, Lower Spring Sheet Beam, Center Beams, Center Pivot Washer, Screw Couplings, Pipes, Buffer Plungers, Buffer Casings, Draw Gear Hooks, Silent Blocks, Cut Off Sheets, Iron Rods, Face Plate, Base Bench Wise,savueesing Cylinder, Lifting Bcm Roll, Tamping Arm, And Other Items Coming Under Ms Scrap On As Is Where Is Condition Available Under The Custody Of Cdms 08 Ward Ap.note: Pick And Choose Of The Material Are Not Allowed. Loading To Be Started From One End And To Be Ended On Other End Only. (loc:bin No 0119 At Scrap Yard

Details: Annual contract for deployment of three numbers un-skilled labour and one number sweeper for up-keeping, daily cleaning, , watch & ward water supply arrangement, cleaning of utensils, bed sheet, pillow cover & blanket including all consumable and T&P etc. in pre-fabricated accommodation buildings near plant area Outside plant) at SSTPP, Dongalia Distt.-Khandwa (M.P.) Note- (1) Quoted rates shall be excluding GST. The evaluation of prices shall be done on least of the total landed cost to MPPGCL i.e. after considering GST rate quoted in the bid.

Details: Description:- 041390--supplying Fabricating And Erecting Welded And/or Bolted And/or Riveted Steel work In Built Up Sections, Trusses And Framed Work, Staging, Racks Etc.for Steel Structures Other Than bridge Girders, Using Rsj, Tees, Angles And Channels/flats, Plates, Gussets, Round Or Square Bars, cleats,boltsetc.,withcontractorsownsteelincludingcutting,bending,straightening,drilling, riveting, Hoisting, Fixing, Erecting, Welding, Bolting Etc., With Providing Stiffeners Wherever Required As perapproveddrawingincludingapplyingaprimingcoatofaapprovedsteelprimerwithall contractors Materials, Labour, Tools & Plants, Lead & Lift Including Crossing Of Tracks If Required Etc., complete As Per Specification And As Directed By Engineer-in-charge.

Details: Description:- Ms Container To Be Delivered To Site With Complete Pump Room Facility Pre-packaged steel Enclose Ready To Install At Site Package Pump House. It Is To Accommodate The Three No's Pump, electrical Control Panels And Allied Fittings With Forced Air Circulating By Exhaust Fans & Electrical fittings. Size Of Container Required Is 8x3.5x3 Mtrs. All Electrical Wiring Switch Board Will Be Fitted. this Will Be Designed Or May Be Fabricated As Per Site Availability Spaces And Location & Layout Of pump House As Per Site Condition Or Construction Of Prefabricated Pump House As Per Site Condition

Details: Description:- Supply, Transportation, Installation, Wiring, Testing And Commissioning Of Multi Section digital Axle Counter(msdac) For Mentioned Detection Point By The Purchased & Track Section As Per sip, Complete With All Accessories, Cable Required With Each Track Device & Card Viz. Axle Detectors, track Side Electronics/dac Field Units, Central Evaluator (central Evaluator Unit Should Be Housed In A pre-fabricated Rack To Be Supplied Along With The System), Reset Unit, Relay Unit, Event Logger & diagnostic Terminals, Etc. Required For Different Detection Points & Track Sections As Per Rdso specifications No. Rdso/spn/176/2013, Ver.3 Or Latest.

Details: Description :high Pressure Multistage Pump With Motor, Horse Power: 7.5 Hp, Inlet / Outlet Size: 40 X 32 Mm,rpm: 2850-3100 Approx, Pressure: 6 To 8 Kg / S q.cm, Flow: 15 To 20 Cubic Meter/ Hour Aprrox, Moc: Ci Gland Type, Base Frame: Ms Fabricated And Coupling (ci Love Joy Type) Coupling, Electric Motor Specifica tion: 7.5 Hp, 3000 Rpm Approx, 415 +/- 10 % Volts, 3 Phase, 50 Hz, Make: Crompton Greaves Or Abb Or Bbl [ Warranty Period: 30 Months After The Date Of delivery ] ]

Details: Description:- Ms Container To Be Delivered To Site With Complete Pump Room Facility Pre-packaged steel Enclose Ready To Install At Site Package Pump House. It Is To Accommodate The Three No's Pump, electrical Control Panels And Allied Fittings With Forced Air Circulating By Exhaust Fans & Electrical fittings. Size Of Container Required Is 8x3.5x3 Mtrs. All Electrical Wiring Switch Board Will Be Fitted. this Will Be Designed Or May Be Fabricated As Per Site Availability Spaces And Location & Layout Of pump House As Per Site Condition Or Construction Of Prefabricated Pump House As Per Site Condition.