Fabrication Tenders

Description: CATEGORY: Steel door confirming to IS 1038 1938 of size 900mm x1800mm. , MS rack of size 1.22m x 0.61m x 1.65m will be supplied alongwith each PD Vertical legs and frame of the racks shall be fabricated out of MS slotted angle iron 65 x 45 x 5mm thick , Brick Trowel Steel 305 mm , Brick Hammer with handle , Aluminimum straight edge 50mm , Plaster Trowel , Galvanised Iron Pan Mortar Tasla , Fish line best quality , Plumb Bob Iron , Rammer Earth with 6 feet long hard wooden Handle , Picks Axes with Chiesel and Point ends Kudali 14 CP , Showel Square Nose 14 Gauge , Phowrah with hard wooden , Painting Brush 100 mm , Multipurpose Non Slip Rubber Reusable Gloves , Aluminium Spirit level 12 inch , Water Leveling pipe PVC 50 mtr , Cutting plier insulates 6 inch , Measuring Tape 15 Mtr , Earthing Electrode Prefabricated gel Earthing electrode of pipe in pipe technology. . , GI Pipe 100 mm dia med grade , Back filled compound , MS earth pit cover of size 30 cm x 30 cm with handle , Aluminium strip of size 25mm x 3mm 9.00m long , Iron spikes 16 inch long complete as directed and specified by buyer , GI strip of size 32 x 6mm 3.00m long , GI nipple 20mm dia and 10cm long IS 1879 , GI reducer socket 40x20mm ISI marked , Lightning air terminal A copper tube 150 cm long x 25 mm dia with five copper prongs of length , MS clamp 40x2mm with nut and bolt complete , GI wire 12 gauge conforming to IS 2062 1991 , Earth Augur one per five LC , PVC Pipe 3m long 6 inch dia , User manual , Tester set Meger for carrying out serviceability check , GI Pipe medium grade of 40mm dia 6 mtr long and one equal socket of 40mm dia welded with MS plate of size 100mm x 100mm x 4mm thick , Manufactured Sand M sand confirming to IS 383-2016 Specifications for coarse and fine aggregates , GI Pipe 40 mm bore 2M long as per IS 1239 , 50 mm bore GI Pipes sleeve , Crystaline Condcutive Mixture CCM , Fire Extinguisher 6 kg ABC MAP 90 along with its accessories

Description: 1] Sej 52 Kg Tongue Rail (three Nos.), 2] Sej 52 Kg Stock Rail ( Four Nos.), 3] Sej 60 Kg Tongue Rail (two Nos.), 4] 52 Kg Cms Crossing Check Rail 1 In 12 (ten Nos.), 5] Switch/ Tongue Rail 52 Kg 1 In 12 (8 Nos.), 6] Trap Switch Rail 52 Kg 1 In 8.5 (two Nos.),7] Attachment Rail 52 Kg Pieces - Ten Nos. (1.41 Metre.), 8] Check Flat (one No.), 9] Fabricated 90 R Check Rail For Lc - 15 Nos (54.51 Metres), Improved 52 Kg, 10] Single Gap Sej 80 Mm Tongue Rail (two Nos.) & 11] Stack Rail (two Nos.) 12] With Check Rail. ( Two Nos.) - Total Qty - 15.303 Mt As Is Where Is Basis, [condemned, Unserviceable, Released, Class - Iii], Custodian : Sr. Section Engineer/p.way/nagercoil Junction [ncj]., S.1539 No. 2024-25-593628 Dtd.22.01.2025, Location : Aralvaymoli [aay] Yard Km 304/000-200 Lhs Between Nagercoil Junction [ncj] - Tirunelveli [ten] Station., Note : 1] Delivery To Be Made On Actual Weighment Basis. 2] When Crane Loading Is Not Possible, The Purchase [by Engaging His Own Labourers] Is Permitted To Cut Rails To Loadable Sizes Of Not Less Than 150 Kgs., 3] In All Cases, I.e. Crane Loading/ Manual Loading, When The Length Of Rails Exceeds 5 Metres Length, The Purchaser [by Engaging His Own Labourers] Is Permitted To Cut Rails To Convenient Lengths Not Less Than 2.5 Meters., 4] Purchaser [by Engaging His Own Labourers] Is Permitted To Cut Rails And Hand Over The Non - Ferrous And Excess Quantity To The Custodian., Special Conditions : 1) Jurisdiction- The Courts In Chennai Alone Shall Have Exclusive Jurisdiction In The Matters/disputes Arising Out Of The Contract/ Arbitration/ Conciliation Proceedings And The Place Of Arbitration/ Conciliation, If Any, Shall Be In Chennai Only., 2) Forfeiture Of Bsv Payment Along With Emd.-in Southern Railway Bsv Partly Paid Along With Emd Will Be Forfeited, If Full Payment Is Not Received In Stipulated Time, With Interest If Any Applicable., 3) Part Delivery-part Delivery Is Not Permitted Against Part Payment On Southern Railway., Nfs/side Assets : 1] Nfs As Per Tms Jsos & Ds 8. [p.l. No. 98011224 [15], Hsn Code : 720429, Gst - 18 % On Fcm], Item : Weighment Rails.

Details: Description:- 1removal Of Gravity Rollers From Rim Quencher 1 To 6, Removal Of Pneumatic Cylinders & Accessories I.e, Manipulator, Centering & Hood.6 Unit 2removal Of Actuator Ball Valve, Water Hose, waterring,gearbox,sprocket,chain,hood&manipulatorassembly.6unit3removalofwater pipelines (inlet & Outlet), Water Pump & Air Pipelines.06 Unit 4repair / Replacement Of Damaged structures Like Channels & Angles, Replacement Of Defective Bearings, Bushes, Pins For Rim Quencher 1, 2 & 3.3 Unit 5fabrication & Replacement Of Complete Structure With New Bearings, Bushes, Pins For rim Quencher- 4, 5 & 6.03 Unit 6replacement Of New Manipulator Assembly With New Bearings Shafts &pins.6unit7replacementofserviced/newpneumaticcylindersformanipulator,hoodand centeringarmswithaccessories.24nos8repair/replacementofhood,bearings,shaft,counter weight, 'v' Groove Pulley & Wire Rope.6 Unit 9repair/ Replacement Of Water Ring Rotation Gear Box, sprockets, Chains, Bearings, Water Ring With Nozzles, Rotary Union, Actuator Valves For Water & Air purgingvalveswithhosesandfittings.6unit10repair/replacementofdefectivecenteringarm structural Supports, Bushes, Centering Rollers And Roller Bolts.6 Unit 11replacement Of Damaged 3" water Inlet Pipe And 3" Water Outlet Pipe , Water Filters,booster Tanks, Gate Valves & Outlet With 11⁄2" pipe For All Supply Lines.6 Unit 12replacement Of Serviced/new Water Booster Pumps Of All Quenchers and Connect With Outlet Water Pipeline.6 Unit 13replacement Of Gravity Conveyor Rollers, Bearings & shaft From Rim Quencher 1 To 6.6 Unit 14paint With One Coat Of Red Oxide And Two Coats Of Apple green Paint.6 Nos 15shifting Of All Removed Scrap Material To Earmarked Area.5 Mt (approx) Rates are Inclusive Of Gst

Description: CATEGORY: 50x50x6mm for the use of holdfast to fix rafter with baffle wall at roof and at rear to fix PPGI sheets , Self taping screw 80mm , Water proofing compound confirming to IS 4645- 1975 Make-Pidilite Dr fixit Acclerex Cico Fosroc. , Rapidite quick setting liquid. , Silicone Gel sealant of 01 pack of 400 gms including applicator gun , Bitumen for filling of expansion joint of PCC , HDPE sheet having weight 100 gm Sqm Black of width 5.50mm Confirming to IS 2508 1984 , Pre-fabricated steel window of size 600mm x450mm shall be provided with Arty Amn Bunker. , MS rack of size 1.22m x 0.61m x 1.65m will be supplied alongwith each Arty Amn Bunker. , Steel door confirming to IS 10381938 of size 900mm x1800mm. , Synthetic enamel paint colour OG Chocolate 1st quality , Oil Bound Distemper of approved Brand. , Thinner Make Asian Berge Shalimar. , Chalk white , Cement base paint. Make Duracem Snowcem and British xtracem , Brick Trowel Steel 305 mm with handle. , Brick Hammer with handle weight 1.2 Kg. , Aluminimum straight edge 50mm squre 2mm thick 1800mm long , Plaster Trowel with hard wooden Handle ISI marked. , Galvanised Iron Pan Mortar Tasla 16 Gauge16 inch dia minimum weight of 1.5 Kg , Fish line best quality. Brick Line , Plumb Bob Iron best quality with all accessories. , Rammer Earth with 6 feet long hard wooden Handle Minimum weight 5 Kg without handle , Picks Axes with Chiesel and Point ends Kudali 14 CP nominal weight 3.0 Kg , Showel Square Nose 14 Gauge TATA High Carbon Steel Product Code SVL 022 blade , Phowrah with hard wooden handles with min weight 2.00 Kgs , Painting Brush 100 mm best quality. , Multipurpose Non-Slip Rubber Reusable Gloves for scrubbing , Aluminium Spirit level 12 inch , Water Leveling pipe PVC 50 mtr , Cutting plier insulates 6 inch , Measuring Tape 15 Mtr , Fire Extinguisher 6 kg ABC MAP 90 along with its accessories confirming to IS 13849 2 Nos for one Amn PD shall be provided , Store list for Jelly Filled LC as per Appx C

Description: 12112ms25a, 98050011, Quantity- 61.945 Mts. Scrap Condemned Unserviceable Ms-ci Signal Interlocking Materials Consisting Of Levers, Rods, Ms Campus Rollers Of Molb, Molb Weights, Molb Booms, Signal Tubular Post, Roller Trestle, Stop Boards, 33 Mm Rods, Signal Arms, Gi And Ms Wires, Lc Gate Pipes, Gate Structures, Ladders, Angles, Channels, Joists, Roller Stands, Electric Poles, Cable Termination Box, Direct Type Lever Frame, Sa 1914 Type Trays, Sm Slides, Ssi Termination Rack, Control Panels, Signal Booms, Boom Locks, Cable Termination Rack, Adjustable Crank, E Type Lock, Cable Marker, Ground Connection Rods, Fuse Unit, Power Racks, Cam Path, Gear Box, Signal Reverser, Ground Lever Frame, Molb, Eolb Pedestal, Telecom Charger Body, Wire Adjustment Screws, Molb Compass Roller, Gate Weights, Cls Tubular Post, Surface Base, Nuts, Bolts, Rounds, Turnout Wheels, Eye Joints, Point Machine Covers, Clamps, Signal Buckets, Pulleys, D.w.diversion Wheel, Gate Control Panel, Calling On Unit, Gear Box Assembly With Clutch, Winch, Offset Brackets, H.p Lock, Chequered Plates, Ptb, Location Boxes, Rkt, Axle Counter Coil Fixing Plate, Shunt Signals, Route Arm, Route [1 Way, 2 Way, 3 Way And 4 Way], Ib Hut Cut Parts, Ms Electrical Point Detector, Junction Type Route Indicator, Route Indicators, Structures, Casing Structures, Ci Bases, Gear Wheels, Flats, Cable Termination Base, U- Brackets, Ci Weights Of Booms, Fabricated Posts, Cls 2, 3 And 4 Aspect Units, Trestle, Sge Block Instrument, Y-crank, Stands For Wheel Tension Measuring Devices Of D.w Clutch, Lock Bar Clips, Drum Clock, Ec Boxes, Relay Racks, Tlj Boxes, Foundation Shoe, Ekt, Pd Clamps, Galaxy Stand, Meeting Posts, Signal Lamp Structures, Point Rods And Other Similar Signal And Interlocking Scrap Material Of Sorts And Sizes, With Or Without Attachments Including Negligible Nf Attachments. Note- Nf Attachments Are Approximately 2 Percent Of Lot Quantity. Location- Bin No- 112, Right Side Of Road No- 1. Hsn Code- 72044900. Gst- 18 Percent Note: Private Crane Permitted For Loading Purpose. Note- Delivery On Actual Weighment Basis Only. Special Note: Overload Of The Carrying Capacity Of The Vehicle Will Not Be Permitted At The Time Of Taking Delivery As Per Motor Vehicle Act 1988.

Description: 12160ms25c, 98050011, Quantity- 48.665 Mts. Scrap Condemned Unserviceable Ms-ci Signal Interlocking Materials Consisting Of Levers, Rods, Ms Campus Rollers Of Molb, Molb Weights, Molb Booms, Signal Tubular Post, Roller Trestle, Stop Boards, 33 Mm Rods, Signal Arms, Gi And Ms Wires, Lc Gate Pipes, Gate Structures, Ladders, Angles, Channels, Joists, Roller Stands, Electric Poles, Cable Termination Box, Direct Type Lever Frame, Sa 1914 Type Trays, Sm Slides, Ssi Termination Rack, Control Panels, Signal Booms, Boom Locks, Cable Termination Rack, Adjustable Crank, E Type Lock, Cable Marker, Ground Connection Rods, Fuse Unit, Power Racks, Cam Path, Gear Box, Signal Reverser, Ground Lever Frame, Molb, Eolb Pedestal, Telecom Charger Body, Wire Adjustment Screws, Molb Compass Roller, Gate Weights, Cls Tubular Post, Surface Base, Nuts, Bolts, Rounds, Turnout Wheels, Eye Joints, Point Machine Covers, Clamps, Signal Buckets, Pulleys, D.w.diversion Wheel, Gate Control Panel, Calling On Unit, Gear Box Assembly With Clutch, Winch, Offset Brackets, H.p Lock, Chequered Plates, Ptb, Location Boxes, Rkt, Axle Counter Coil Fixing Plate, Shunt Signals, Route Arm, Route [1 Way, 2 Way, 3 Way And 4 Way], Ib Hut Cut Parts, Ms Electrical Point Detector, Junction Type Route Indicator, Route Indicators, Structures, Casing Structures, Ci Bases, Gear Wheels, Flats, Cable Termination Base, U- Brackets, Ci Weights Of Booms, Fabricated Posts, Cls 2, 3 And 4 Aspect Units, Trestle, Sge Block Instrument, Y-crank, Stands For Wheel Tension Measuring Devices Of D.w Clutch, Lock Bar Clips, Drum Clock, Ec Boxes, Relay Racks, Tlj Boxes, Foundation Shoe, Ekt, Pd Clamps, Galaxy Stand, Meeting Posts, Signal Lamp Structures, Point Rods And Other Similar Signal And Interlocking Scrap Material Of Sorts And Sizes, With Or Without Attachments Including Negligible Nf Attachments. Note: Private Crane Permitted For Loading. Note- Nf Attachments Are Approximately 2 Percent Of Lot Quantity. Location- Bin No- 160, Left Side Of Road No- 1. Hsn Code- 72044900. Gst- 18 Percent. Note- Delivery On Actual Weighment Basis Only. Special Note: Overload Of The Carrying Capacity Of The Vehicle Will Not Be Permitted At The Time Of Taking Delivery, As Per Mv Act 1988.

Details: Description:- Manufacturing And Supply Of Alumino Thermic Welding Portions Of 52kg/60kg/60e1-r260 As Approved By Rdso for Welding Of Rails 52kg/60kg/60e1-r260 Kg For 25mm Gap By The Process Of At Welding Along With Complete Accessories confirming To The Specification Laid Down In Indian Railway Standard Specification No.irst-19-2020 Up To Date Correction Slips with Single Shot Crucible Fitted With Automatic Tapping Thimble, 3 Pieces Pre Fabricated Mould (zircon Washed) Manually pressed Using Compressed Air Petrol/lpg Pre Heating For Execution Of Welding Of Rail Joint As Directed By The Engineer In Charge at Site. Note: 1. The Accessories Along With Welding Portion Shall Be Supplied As Per Annexure-i Of The Irussor-2021. 2. Rate Is inclusive Of Transportation Of Above To Sse/p.way Stores. For 60kg 90 Uts Rails

Details: Description:- "manufacturing And Supply Of Alumino Thermic Welding Portions Of 52kg/60 Kg/60ei-r260 As Approved By Rdso for Welding Of Rails 52kg/60kg/60ei-r260 Kg For 25mm Gap By The Process Of At Welding Along With Complete Accessories confirming To The Specification Laid Down In Indian Railway Standard Specification No.irst-19-2020 Up To Date Correction Slips with Single Shot Crucible Fitted With Automatic Tapping Thimble, 3 Pieces Pre Fabricated Mould (zircon Washed) Manually pressed Using Compressed Air Petrol/lpg Pre Heating For Execution Of Welding Of Rail Joint As Directed By The Engineer In Charge at Site. Note: 1. The Accessories Along With Welding Portion Shall Be Supplied As Per Annexure-i Of The Irussor - 2021. 2. Rate is Inclusive Of Transportation Of Above To Sse/p.way Stores. " For 60kg 90 Uts Rails

Details: Description:- Manufacturing And Supply Of Alumino Thermic Welding Portions Of 52kg/60 Kg/60ei- r260 As Approved By Rdso For Welding Of Rails 52kg/60kg/60ei-r260 Kg For 25mm Gap By The Process of At Welding Along With Complete Accessories Confirming To The Specification Laid Down In Indian railway Standard Specification No.irst-19-2020 Up To Date Correction Slips With Single Shot Crucible fittedwith Automatic Tapping Thimble, 3 Pieces Pre Fabricated Mould (zircon Washed) Manually pressed Using Compressed Air Petrol/lpg Pre Heating For Execution Of Welding Of Rail Joint As Directed by The Engineer In Charge At Site. Note: 1. The Accessories Along With Welding Portion Shall Be supplied As Per Annexure-i Of The Irussor - 2021. 2. Rate Is Inclusive Of Transportation Of Above To sse/p.way Stores. For 60kg 90 Uts Rails

Details: Description:- Manufacturing And Supply Of Alumino Thermit Welding Portions Of 52kg/60 Kg/60ei- r260 As Approved By Rdso For Welding Of Rails 52kg/60kg/60ei-r260 Kg For 25mm Gap By The process Of At Welding Along With Complete Accessories Confirming To The Specification Laid Down In indian Railway Standard Specification No.irs/t-19-2020 Up To Date Correction Slips With Single Shot crucible Fitted With Automatic Tapping Thimble, 3 Pieces Pre Fabricated Mould (zircon Washed) manually Pressed Using Compressed Air Petrol/lpg Pre Heating For Execution Of Welding Of Rail Joint as Directed By The Engineer In Charge At Site. Note: 1. The Accessories Along With Welding Portion shall Be Supplied As Per Annexure-i Of The Irussor - 2021. 2. Rate Is Inclusive Of Transportation Of above To Sse/p.way Stores.(i)- For 52kg 90 Uts Rails