Fabrication Tenders

Description: CATEGORY: Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - As per tender document; Sl No 1 Earth excavation by mechanical means Hydraulic excavator or manual means for foundation substructures plinth beam cess pits trenches all.. , Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - As per tender document; Sl No 2 Providing and laying plain cement concrete 1 is to 2 is to 4 using 20mm maximum size graded aggregates including mechanical mixing transp.. , Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - As per tender document; Sl No 3 Providing and laying Reinforced cement concrete M30 using 20mm maximum size graded aggregates including mechanical mixing transporting et.. , Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - As per tender document; Sl No 4 Providing straightening decoiling wherever necessary bending cutting binding and fixing in position steel reinforcement TMT bars of Fe 50.. , Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - As per tender document; Sl No 5 Supplying fabricating erecting and fixing in position at all levels centering and shuttering to correct line and levels including strutti.. , Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - As per tender document; Sl No 6 Providing and constructing 200mm thick precast concrete solid blocks masonry wall in cement mortar; As per tender document , Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - As per tender document; Sl No 7 Leveling the area to the required gradient in all types of soil including cutting the mounds wherever required for filling the low lying .. , Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - As per tender document; Sl No 8 Providing plastering to the external surfaces of brickwork concrete at all elevations in cement mortar; As per tender document , Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - As per tender document; Sl No 9 Dismantling of RCC works at all levels by manually by mechanical means including Cutting and stacking of steel reinforcement bars and dis.. , Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - As per tender document; Sl No 10 Demolishing Stone rubble masonry In cement mortar at all levels by manually by mechanical means carefully without damaging adjacent stru.. , Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - As per tender document; Sl No 11 Dismantling brick work In cement mortar at all levels by manually by mechanical means carefully without damaging adjacent structures inc..

Description: CATEGORY: Manufacturing and supply of Structural items of FOL shed of Size 4200 X 3200 X 3000 mm using mild Steel structure , Side walls stores using 0.60mm of PPGL sheets , Roofing Sheets as per TS , MS Doors as per TS , Self screw for fixing of roof size as reqd on site. , Star Screw full thread 25 mm ISI Mark , Nuts and Bolts 8mm dia 60mm to 120mm long with washer , GI J Hook 8mm with 1 nut 2 bitumin washer and limped washer , Rivit of 500 Nos , LED Tube light complete set 18W 4 feet long , Switch Piano flush type , PVC switch board 6 inch x4 inch , PVC casing and capping of size 25 mm , Wire Single Core Copper Conductor 2.5 Sqmm , MCB 10 Amp SP , Armoured Cable10 sqmm 4 Core copper , LT Panel Board Factory Fabricated , Shelves for storage 2100 mm x 450 mm x 750mm , Insulation tape 45 Mtr with ISI mark , Change over switch 100 Amp 04 pole , Ceiling Rose. , Service wire 10 sq mm flat 2 core aluminium connector cable , GI Wire 14SWG , Fire Extinguisher 6 Kgs ABC dry powder stored pressure type , Paint for touch up Green , Paint for touch up Black , Distemper , Plywood as per TS , Scantling teak wood size 140 to 160 inch , FRP Storage Tank Conforming to UL 1316 of Capacity 5KL with standard accessories , Wire Single Core Copper Conductor 2.5 Sq mm , PVC Pipe 100 MM Dia , GI Elbow 20mm , GI Gate valve connector , GI Socket 20mm with thread , GI Union 20mm , PVC flexible hose pipe 20 mm dia , Lightening Conductor made of copper Tube with five copper prongs of length 15 cm with complete stores , Industrial Fuel Transfer Pump Automation Grade , Provision of fire extinguisher 50 Kgs ABC Dry powder stored pressure type trolley mounted. , HDPE Tarpaulin of Size 30 feet x 30 feet , Ordinary Portland Cement grade 43 , Coarse Sand , Stone Aggregate 20 MM , Stone Aggregate 40 to 60 mm , 10 mm TMT Bar , RR Masionary stone , Connected stores as per final design

Description: 12229ms25c, 98050011, Quantity- 17.940 Mts. Scrap Condemned Unserviceable Ms Bed Plates, Water Tanks And Water Tank Cut Pieces, Ms Path Plates, Foot Path Plates, Sheets, Bin Cut Parts, Rack And Roller Path, Air Tank Cover Parts, Striker Casting Wear Plates, Sliding Doors, Swing Doors, Flap Doors, Ms Chequered Plates, Expansion Tank Parts, Ms Plates, Plate Cuttings, Wagon Doors, Dsl Engine Long Hood, Dummy Bogie Cut Parts, Cast Iron Surface Plates And Base Plates, Axle Counter Ms Frames, Baking Oven Cut Pieces, Ocb Duct, Welding Machine Outer Body, Inverter Empty Body, Tap Changer Ms Spares And Empty Body, Manipulator, Shaping Machine Ms Body, Ms Gates, Collapsible Gates, Base Plate, Short Hood Cabin Cut Parts, Tables, Racks, Lavatory Chute Brackets, Ms Travelling Base, Ms Danger Boards, Radiator Ms Spares, Ms Die Blocks, Ms Body Of Radiator Fan Motor, Capacitor Ms Body, Auxiliary Transformer Ms Empty Body, Ducts, Dust Bin Stand, Ht Load Brake Switch Body, Ms Transformer Body, Ventilator Motor Frames, Transformer Top Plate, Air Receiver, Storage Box Cut Parts, Coach Body Parts, Dust Bins, Lockers, Cattle Guard, Incinerator Chimney Parts, Incinerator Oven, Incinerator Cut Parts, Boxes, Wagon Doors Cut Pieces, Wagon Bfr End Plates And Cut Pieces, Ms Fuel Tanks [fire Prone], Boiler Tank Cut Pieces, Angles, Girder, Sheets Cut Pieces, Portable Stands, Channels ,fabricated Structures And Other Corroded Heavy Melting Scrap Of Different Thickness Of Sorts And Sizes, With Or Without Attachments. Note- 1. Gas Cutting Permitted For The Purpose Of Loading Only. 2. It Is The Responsibility Of The Purchaser To Ensure That Fuel Tanks To Be Filled With Water And Cleaned Thoroughly Free From Flammable Substances Before Cutting To Avoid Explosion Or Any Casualties. 3. Private Crane Permitted For Loading. Special Note- Gas Cutting For Fuel Tank Should Be Done In Open Area [cutting Must Be Kept Clear And Free Of Flammables] And Away From Bins [free From Recognized Hazards That Are Causing Or Are Likely To Cause Serious Harm] And Should Follow Fire-prevention And Fire-protection Measures. Location- [bin No- 229, Right Side Of Road No- 2]. Hsn Code- 72044900. Gst- 18 Percent. Note- Delivery On Actual Weighment Basis Only. Special Note: Overload Of The Carrying Capacity Of The Vehicle Will Not Be Permitted At The Time Of Taking Delivery

Description: CATEGORY: 50x50x6mm for the use of holdfast to fix rafter with baffle wall at roof and at rear to fix PPGI sheets , Self taping screw 80mm , Water proofing compound confirming to IS 4645- 1975 Make-Pidilite Dr fixit Acclerex Cico Fosroc. , Rapidite quick setting liquid. , Silicone Gel sealant of 01 pack of 400 gms including applicator gun , Bitumen for filling of expansion joint of PCC , HDPE sheet having weight 100 gm Sqm Black of width 5.50mm Confirming to IS 2508 1984 , Pre-fabricated steel window of size 600mm x450mm shall be provided with Arty Amn Bunker. , MS rack of size 1.22m x 0.61m x 1.65m will be supplied alongwith each Arty Amn Bunker. , Steel door confirming to IS 10381938 of size 900mm x1800mm. , Synthetic enamel paint colour OG Chocolate 1st quality , Oil Bound Distemper of approved Brand. , Thinner Make Asian Berge Shalimar. , Chalk white , Cement base paint. Make Duracem Snowcem and British xtracem , Brick Trowel Steel 305 mm with handle. , Brick Hammer with handle weight 1.2 Kg. , Aluminimum straight edge 50mm squre 2mm thick 1800mm long , Plaster Trowel with hard wooden Handle ISI marked. , Galvanised Iron Pan Mortar Tasla 16 Gauge16 inch dia minimum weight of 1.5 Kg , Fish line best quality. Brick Line , Plumb Bob Iron best quality with all accessories. , Rammer Earth with 6 feet long hard wooden Handle Minimum weight 5 Kg without handle , Picks Axes with Chiesel and Point ends Kudali 14 CP nominal weight 3.0 Kg , Showel Square Nose 14 Gauge TATA High Carbon Steel Product Code SVL 022 blade , Phowrah with hard wooden handles with min weight 2.00 Kgs , Painting Brush 100 mm best quality. , Multipurpose Non-Slip Rubber Reusable Gloves for scrubbing , Aluminium Spirit level 12 inch , Water Leveling pipe PVC 50 mtr , Cutting plier insulates 6 inch , Measuring Tape 15 Mtr , Fire Extinguisher 6 kg ABC MAP 90 along with its accessories confirming to IS 13849 2 Nos for one Amn PD shall be provided , Store list for Jelly Filled LC as per Appx C

Description: 12112ms25a, 98050011, Quantity- 61.945 Mts. Scrap Condemned Unserviceable Ms-ci Signal Interlocking Materials Consisting Of Levers, Rods, Ms Campus Rollers Of Molb, Molb Weights, Molb Booms, Signal Tubular Post, Roller Trestle, Stop Boards, 33 Mm Rods, Signal Arms, Gi And Ms Wires, Lc Gate Pipes, Gate Structures, Ladders, Angles, Channels, Joists, Roller Stands, Electric Poles, Cable Termination Box, Direct Type Lever Frame, Sa 1914 Type Trays, Sm Slides, Ssi Termination Rack, Control Panels, Signal Booms, Boom Locks, Cable Termination Rack, Adjustable Crank, E Type Lock, Cable Marker, Ground Connection Rods, Fuse Unit, Power Racks, Cam Path, Gear Box, Signal Reverser, Ground Lever Frame, Molb, Eolb Pedestal, Telecom Charger Body, Wire Adjustment Screws, Molb Compass Roller, Gate Weights, Cls Tubular Post, Surface Base, Nuts, Bolts, Rounds, Turnout Wheels, Eye Joints, Point Machine Covers, Clamps, Signal Buckets, Pulleys, D.w.diversion Wheel, Gate Control Panel, Calling On Unit, Gear Box Assembly With Clutch, Winch, Offset Brackets, H.p Lock, Chequered Plates, Ptb, Location Boxes, Rkt, Axle Counter Coil Fixing Plate, Shunt Signals, Route Arm, Route [1 Way, 2 Way, 3 Way And 4 Way], Ib Hut Cut Parts, Ms Electrical Point Detector, Junction Type Route Indicator, Route Indicators, Structures, Casing Structures, Ci Bases, Gear Wheels, Flats, Cable Termination Base, U- Brackets, Ci Weights Of Booms, Fabricated Posts, Cls 2, 3 And 4 Aspect Units, Trestle, Sge Block Instrument, Y-crank, Stands For Wheel Tension Measuring Devices Of D.w Clutch, Lock Bar Clips, Drum Clock, Ec Boxes, Relay Racks, Tlj Boxes, Foundation Shoe, Ekt, Pd Clamps, Galaxy Stand, Meeting Posts, Signal Lamp Structures, Point Rods And Other Similar Signal And Interlocking Scrap Material Of Sorts And Sizes, With Or Without Attachments Including Negligible Nf Attachments. Note- Nf Attachments Are Approximately 2 Percent Of Lot Quantity. Location- Bin No- 112, Right Side Of Road No- 1. Hsn Code- 72044900. Gst- 18 Percent Note: Private Crane Permitted For Loading Purpose. Note- Delivery On Actual Weighment Basis Only. Special Note: Overload Of The Carrying Capacity Of The Vehicle Will Not Be Permitted At The Time Of Taking Delivery As Per Motor Vehicle Act 1988.

Description: 12160ms25c, 98050011, Quantity- 48.665 Mts. Scrap Condemned Unserviceable Ms-ci Signal Interlocking Materials Consisting Of Levers, Rods, Ms Campus Rollers Of Molb, Molb Weights, Molb Booms, Signal Tubular Post, Roller Trestle, Stop Boards, 33 Mm Rods, Signal Arms, Gi And Ms Wires, Lc Gate Pipes, Gate Structures, Ladders, Angles, Channels, Joists, Roller Stands, Electric Poles, Cable Termination Box, Direct Type Lever Frame, Sa 1914 Type Trays, Sm Slides, Ssi Termination Rack, Control Panels, Signal Booms, Boom Locks, Cable Termination Rack, Adjustable Crank, E Type Lock, Cable Marker, Ground Connection Rods, Fuse Unit, Power Racks, Cam Path, Gear Box, Signal Reverser, Ground Lever Frame, Molb, Eolb Pedestal, Telecom Charger Body, Wire Adjustment Screws, Molb Compass Roller, Gate Weights, Cls Tubular Post, Surface Base, Nuts, Bolts, Rounds, Turnout Wheels, Eye Joints, Point Machine Covers, Clamps, Signal Buckets, Pulleys, D.w.diversion Wheel, Gate Control Panel, Calling On Unit, Gear Box Assembly With Clutch, Winch, Offset Brackets, H.p Lock, Chequered Plates, Ptb, Location Boxes, Rkt, Axle Counter Coil Fixing Plate, Shunt Signals, Route Arm, Route [1 Way, 2 Way, 3 Way And 4 Way], Ib Hut Cut Parts, Ms Electrical Point Detector, Junction Type Route Indicator, Route Indicators, Structures, Casing Structures, Ci Bases, Gear Wheels, Flats, Cable Termination Base, U- Brackets, Ci Weights Of Booms, Fabricated Posts, Cls 2, 3 And 4 Aspect Units, Trestle, Sge Block Instrument, Y-crank, Stands For Wheel Tension Measuring Devices Of D.w Clutch, Lock Bar Clips, Drum Clock, Ec Boxes, Relay Racks, Tlj Boxes, Foundation Shoe, Ekt, Pd Clamps, Galaxy Stand, Meeting Posts, Signal Lamp Structures, Point Rods And Other Similar Signal And Interlocking Scrap Material Of Sorts And Sizes, With Or Without Attachments Including Negligible Nf Attachments. Note: Private Crane Permitted For Loading. Note- Nf Attachments Are Approximately 2 Percent Of Lot Quantity. Location- Bin No- 160, Left Side Of Road No- 1. Hsn Code- 72044900. Gst- 18 Percent. Note- Delivery On Actual Weighment Basis Only. Special Note: Overload Of The Carrying Capacity Of The Vehicle Will Not Be Permitted At The Time Of Taking Delivery, As Per Mv Act 1988.

Description: CATEGORY: UPVC bend , 15mm Brass stop cock Conforming to IS-8934 1978 , 3 Layer of PP R Polypropylene random copolymer Pipes SDR 7.4 , 20mm elbow suitable for 20mm dia PPR pipe conforming to IS 1239 1989 , 20mm Socket suitable for 20mm dia PPR pipes Conforming to IS 1239 1989 , 20mm equal Tee suitable for 20mm dia PPR Pipe conforming to IS 1239 1989 , 20mm union suitable for 20mm PPR pipes Conforming to IS 12391989 , PPR End Plug 20mm conforming to IS 1239 1989 , PPR pipe clamp suitable for 20mm piping , Bib cock 20 mm with flange conforming to IS 8931 1978 , GI reducer socket 15 obliq 20mm , GI reducer elbow 15 obliq 20mm , Pre fabricated Man hole cover 6 feet x 4 feet made of ISA 40x40x6mm frame , Rotational moulded polyethylene water storage tank double layer , PPR tank connector 20mm with Check nut and washer , White lead safeda , Thread cotton ball 100 m long , Vitreous china wash Hand Basin WHB white flat back size 550x400 mm , 20mm dia pillar taps of PTMT of any colour high pressure screwed for iron pipe , 110mm dia UPVC SWR pipe single socketed pipe Type A in any length with rubber joint , 600x450mm size looking mirror mounted on PVC with PVC shelf assembly including all fittings all as specified , Drilling machine portable type electrically driven , Aluminum straight edge 50mm square 2mm thick 1800mm long , Wooden Flat Gurmala , Hand rivet gun machine , Tile cutter machine with 6 spare blades each , Tasla Iron 18 inch , Cutting plier insulate 6 inch , Screw driver 12 inch with insulated plastic handle , Adjustable spanner 12 inch , Hacksaw frame with 2 blade , Hand gloves insulated with 2 rubber , Drill bit 6mm dia , Drill bit 8mm dia , Drill bit 10mm dia , Tape measuring metallic 30m , Mason trowel Karchi , Axepicks with wooden handle , Fawda with wooden handle , Rammer with wooden handle of wt 5 Kg , Pipe wrench 12 inch , Pipe wrench 18 inch , Aluminum spirit level 6 inch , Brick Line Best quality , PPR Welding electrode 20 to 63mm , Plumbob 250gms , Tape measuring metallic 5m

Details: Description:- Manufacturing And Supply Of Alumino Thermic Welding Portions Of 52kg/60kg/60e1-r260 As Approved By Rdso for Welding Of Rails 52kg/60kg/60e1-r260 Kg For 25mm Gap By The Process Of At Welding Along With Complete Accessories confirming To The Specification Laid Down In Indian Railway Standard Specification No.irst-19-2020 Up To Date Correction Slips with Single Shot Crucible Fitted With Automatic Tapping Thimble, 3 Pieces Pre Fabricated Mould (zircon Washed) Manually pressed Using Compressed Air Petrol/lpg Pre Heating For Execution Of Welding Of Rail Joint As Directed By The Engineer In Charge at Site. Note: 1. The Accessories Along With Welding Portion Shall Be Supplied As Per Annexure-i Of The Irussor-2021. 2. Rate Is inclusive Of Transportation Of Above To Sse/p.way Stores. For 60kg 90 Uts Rails

Details: Description:- Reinforced Cement Concrete Of Grade M-40/45 With Weigh Batching Plant In Prestressed concreteslab/girdercastinsituasperrdso'sdrawingwithhardcoarsecrushedaggregateof maximum Size 20mm Of Approved Quality And Grading Including Fabricating Errecting And Dismantling offormwork,shutteringmouldsetc.includingprovidingsheathingduets,scaffolding(complete arrangement Of Bottom Support From River Bed Is To Be Done By The Contracter At His Own Cost) With weigh Batching, Mechanical Mixing And Placing In Position Of Concrete. Vibrating, Tamping, Curing And finishing Etc. Complete With Contractor's Materials Including Plasticized But Excluding Supply Of Cement and Steel With All Necessary Construction Plants And Machinery, Labour Etc. Complete As Per Drawing, specification And As Directed By The Engineer, Plastcizer As Per Specification Shall Be Arrangerd By The contractor At His Own Cost. Reinforcement Cement And Prestressing Steel Work Shall Be Paid Separately. (approved Source Of Coarse Agreegate Is Dalla Range, Rewa Range & Kabarai Range. Any Modification In above Source Will Be Only After Prior Approval Of Engineer-in-charge.).

Details: Description :window Roller Blind For Vista Dome Coaches - Width 2200mm X 1450mm Pull Out Length - Fabric Of The Blind Confirming To Bs - 5867 - 2- 2008 / is 15590 - Shade Of The Fabric To Have Yellow Tone - Similar To Coach Interior Furnishing With Top Cover Either Aluminium Extruded Section Or Fabricated From A luminium Sheet With Suitable Mounting Clamps Arrangement Which Should Be One To One Replaceable With The Existing Ones With Suitable User Friendly Bottom hand Hold To Be Over The Full Width Of The Fabric Secured With Extruded Aluminium Section. The Up & Down Movement Of The Roller Blind Should Be Adjustable over The Entire Pull-out Length By Effortless Push Up Or Pull Down By Hand Only Without Any Stoppers & Without Any Automatic Spring Roll Back. Detail Drawing of Mounting Arrangement And Overall Drawing Is Not Available. Hence, 01 Sample To Be Approved For Practical Fitment Before Bulk Supply. [ Warranty Period: 30 Months After The Date Of Delivery ] ]