Fabrication Tenders

Description: CATEGORY: Cement OPC 43 Grade packed in HDPE bag each 50 Kg wt conforming to IS 8112-1989 Make-Birla Gold,Ambuja,Ultratech,ACC,JK or Dalmiya under Job No 2502 MMG BKR as per store list , Stone Boulder 9 inch to 12 inch , Coarse aggregate 40-63 mm graded , Coarse sand free from vegetation , Coarse aggregate 20mm graded , Coarse aggregate 40 mm graded , Water Proofing compound confirming to IS 2645-2003 Make-Pidilite,Dr fixit, Fevicol , PBS Roll 20m Long , Width of 0.9 Mtr ISI Marked with Min weight of 34 Kgs oblique Roll , Cement based paint Snowcem Make-Berger,Asian,Nerolac , Synthetic Paint enamelled OG confirming to IS 5-2004 Make- Berger,Asian,Nerolac , Synthetic Paint enamelled Brown confirming to IS 5-2004 Make-Berger,Asian,Nerolac , Anti corrosive red oxide zinc chromate primer confirming to IS 5- 2004 Make-Berger,Asian,Nerolac , Loop Holes 1000 x 300 mm Make-TATA,SAIL,JSW , Ventilator Steel 300 x450 mm wiil be fabricated using ISA 35x35x5mm for outer frame and ISA 30x30x3mm for shutter frame with blace sheet Make- TATA, SAIL,JSW as per store list att , MS binding wire TATA, SAIL,JSW , ISMB hot rolled MS 125, 4000mm long Make- TATA,SAIL,JSW , ISMB hot rolled MS 125, 1200mm long Make-TATA, SAIL,JSW , SRT 1840 x 613 x 180 , 2 mm thick MS Sheet Hot Rolled Steel with nuts and bolts incl One coat of Red Oxide Make-TATA,SAIL,JSW , Prefab mild steel door of size 900x1700, outer frame made out of ISA 40x40x6mm and door shutter frmae of ISA 35x35x5mm and all stiffner ISA 30x30x3mm. Steel shall conform to IS-800 Make- TATA,SAIL,JSW , HDPE sand bag OG colour of size 34 inch x 14 inch , Mild Steel Bars of size 6 to 8mm dia conforming to IS 432 Part I 1982 Make-TATA,SAIL,JSW , Preferb folding double sleeping sleeping bunks made of MS columns 65x65x6 mm and ms plate from made of ISA 40x40x6mm, hold fast Make-Tata,Sail,Jsw as per store list attached , Wooden planks for shuttering IInd class wood of size 3.0 x 0.30 x 0.026m , Wooden Scantling various sizes , Nails various size , Earthing plate 600 x 600 x 6 mm Galvanised steel suitable for GI strip fittings, drilled with 2 Nos holes for 6 mm dia near one side , Air termination single pointed aluminium rod 12 mm dia and 300 mm long , GI pipe 40 mm dia light grade Make-Jindal,Tata,Kalinga , GI pipe 20 mm dia light grade Make-Jindal,Tata, Kalinga , Insulating PVC block 75x75x30 mm with insulating clamp nut and bolt Make-Presto,Polycab,Finolex , Testing point terminal block make of gun metal and phosphorus bronze size 75 x 75 x 25 mm drilled and screwed including 3 Nos 8 mm dia 25 mm long hexagonal head screw , Aluminium strips 25 x 3.0 mm , Nut and bolts 6 mm dia 30mm long with check nut and washer , Charcoal , Salt Normal , CI earth pit cover of size 300 x 300 x 6 mm with Angle iron of size 20x20mm, 3 mm thick with MS frame , Funnel fitted with 20 mm diameter GI Pipe 1.5 m Long Pipe Make-Jindal,Tata,Kalinga , Galvanized Iron strip 32 x 6 mm

Description: CATEGORY: HDPE laminated Sand Bag of size 75x40 cm Sand colour and each bag having weight not less than 60 gms , SHS 6 mm thick size 120x120mm x 2.4m long for column with holes as per tech spec , ISMB 150 RSJ 150 x 75 mm 1.85 mtr long for beam conforming to relevant IS as per tech spec att , ISMB 150 RSJ 150 x 75 mm 60 Cm mtr long for beam conforming to relevant IS as per tech spec att , ISMB 125 RSJ 125 x 70mm 3.0m long for beam conforming to relevant IS as per tech spec att , SHS 6 mm thick size 70x70mm x 1.85m long for with conforming to IS as per tech spec att , 6mm thick MS plate 75x150mm welded with G1 beam connected with nut and bolts , 6mm thick MS plate 100mm x 100mm with a gap of 75mm as per tech spec att , 12mm dia nut bolt 75mm long inserted in 12mm dia eight nos hole in each column , 6mm thick MS base plate of size 150 x150 mm for SHS column as per tech spec att , Steel Roofing Trough of size 1630 mm x 613 mm x 180 mm made out of 2 mm thick as per tech spec att , MS hexagonal nuts Bolts and washers 12 mm dia 40 mm long. , LDPE sheet 3 m wide weighing 1.00 Kg per RM black in colour and shall contain as per tech spec att , Red Oxide primer conforming to relevant IS , Synthetic Enamel Paint Colour Green Ist quality conforming to relevant IS as per tech spec att , Thinner as per as per tech spec att . Sample to be approved before supply. , Dry distemper as per tech spec att. Sample to be approved before supply , Chalk whiting as per tech spec attSample to be approved before supply , Paint Brush 4 inch Make Amar or Lucky Sample to be approved before supply , Pre fabricated steel door of size 0.90m x 1.80m made out of 2mm thick MS black carbon sheet as per tech spec att , Supply of Swivel Bullet proof glass glass 750mm x500mm size 72 mm thick as per tech spec att , Silicone Gel sealent of 01 pack of 400 gms including aplicator gun , Ply wood 10 mm thick as per requirement for flat surface , Foundation bolts of 16 mm dia and 250 m long with nut bolts washer etc. , Stone Aggregate to be crushed rock or gravel 20mm graded confirming to relevant IS , Natural sand confirming to relevant IS as per tech spec att , Stone Aggregate to be crushed rock or gravel 40mm graded confirming to relevant IS as per tech spec att , Rapidite quick setting liquid. , Integrated water proofing compound. , Drilling machine portable type, electrically driven , Aluminimum straight edge 50mm squre 2mm thick 1800mm long , wooden Flat Gurmala , Water leveling pipe PVC 100 mtr , Hand Rivet Gun machine , Drill bit 6mm dia , Drill bit 8mm dia , Drill bit 10mm dia , Tape measuring metallic 30 M , Mason trowel Karchi , Tasla Iron 18 inch , Shovel with wooden handle , Axe Picks with wooden handle , Fawda with wooden handle , Crobar 5 feet long , Rammer with wooden handle of WT 5 AND 10 KG , Sieve for sieving fine and crose AGG 900 x 1500mm made of angle iron frame with stand , Brick Hammer 1,2 Kgs , Cutting plier Insulate 6 inch , Screw Driver 12 INCH with insulated plastic , Digital Clamp Meter , Pipe Wrench 12 inch , Pipe Wrench 18 inch , Adjustable spanner 12 inch , Hacksaw frame with 2 Blade , Hand Gloves Canvas with ISI Mark , Aluminium Sprit level 6 inch , Brick Line , Plumbob

Description: 12231ms25a,98050175, Quantity- 120.250 Mts. Scrap Condemned Unserviceable Ms-gi-ci Rusted, Corroded,dusted Mixed Scrap Of C And W,loco,p. Way,signal Interlocking Material Consisting Of All Type Of Sheets,boxes,ms High Gauge,pipes,footsteps,rings,strips,filters,trusses,patch Cut Parts,gutters,drum Clocks,distribution Boards,u Rack,boring Rod,ms Panel Body,ms Battery Charger Covers,hand Cuffs,driver Seat,hand Cart,push Trolley,packing Strips,ms Body Of Block Instrument,ms Boiler Coil Cut Pieces,42 U Rack Ms Body,ms Collapsible Gate,ms Termination Box,ms Bathroom Ventilator,ms Body Of Data Logger,ms Heater Coil,screen Guard,nuts,bolts,lavatory Doors,ms Carriage Doors,pins,rivets,links,rods,angle Cut Pieces,structural Frames,brackets,drums,cocks,basins,wire Meshes,wire Ropes,water Tank Cut Up Parts,casings,corrugated Sheets,filter Top And Bottom Caps,clamps,washer Plates,stands,frames,sheet Cuts,plate Cuts,joists,channels,bases,plates,flats Cut Pieces,vestibule Frames,window,door,shutters,head Stocks Cut Up Parts,broken T And P Items,racks,compensating Rings,bindings,washers,dust Bins,chains,berth Strips,gate Frames,iron Furniture,motor Bodies,screw Rods,levers,flats,rod Cut Pieces,trolley Wheels,gi Ducts,glow Sign Boards,ms Electrical Scrap,building Rods,packing Strips,ms Body Of Rru,air Cooler Empty Bodies,cbf Filter,corrugated Sheets,drums,blower Motor Frames,ucb Packing Frames,under Frame Cut Up Parts,berth Frames,supports,cylinder Blower Covers,valves,end Shield Covers,traction Motor Yokes,shafts,piston Rings,gears,brake Shoe Heads,brake Gear Items,straps,cotters,springs,equalizing Stays,fan Hub,end Shield,pinions,ms Covers,signal Arms,lc Gate Pipes,ladders,angles,signal Booms,rounds,signal Buckets,pulleys,fabricated Posts,signal Lamp Structures,liners,screws,spikes,air Brake Cylinders,brake Hangers,bss Hangers,battery Boxes,battery Containers,junction And Location Boxes,sleepers Cut Pieces,axle Counter Empty Box,dc-dp Ips Empty Rack ,sge Block Instrument Empty Box ,reset Counter Box,gps Clock ,42 V Rack,transformer Bay,ms Chain Pulley Blocks,beam Scale Parts,idly Cooker With Steam Generator Body,wheel Barrow,fry Pan Single Burner,ms Floor Stand,ms Sliders,ms Body Wet Grinder,fry Pan,jara,ms Ips Rack Rifle Safety Chain,ms Air Pump,foot Spray,antenna,spiral Binding Machine,ms Man Drill,trbc Covers,hand Cart Push Trolley,expresser Fan Guard,ms First Aid Box,hacksaw Frame,tool Box,tie Bars,ci Brake Blocks,composite Brake Blocks,ci Pulleys,buckets,ms Gear Wheels,gym Equipment,roti Maker,bicycle Parts,axle Box,bfr Cut Up Parts,grills,mesh,gate Wheels,girders Cut Pieces,collars,trolleys,foot Plates,signal Point Rods And Any Other Ms-gi-ci Material Present In The Lot With Or Without Attachments Of Nf,ss,rubber,nylon And Plastic. Ms Pan Mortars,wire Claws,wire Baskets,crow Bars,jim Crow,dip Lorry,weld Filling Body,sleeper Hooks,rail Dollies,rail Cutting Frames,augers,pick Axe,tongue For Rails,spades,beaters,ballast Rake,powrahs,rail Cum Road Mono Trolley,case Tin,h.s.lamps,rail Dolly Clips,shovels,trolley Wheels And Similar Gang Man Items Of Sorts And Sizes,with Or Without Attachments.fiber,glass,windows,frp Glass Windows,window Frames Of Sorts And Sizes,broken Or Unbroken,with Or Without Attachments Of Nf Window Shutters. [aluminium - 2 Percent] Note- 1. Nf Material,axles,wheel Discs,and Rails Or Material Not Mentioned In The Description,if Found During The Delivery Are To Be Returned To Railways. 2. Track And Track Fittings Running Through This Area Are Excluded. 3. Nf And Stainless-steel Attachments Are Approximately 0.1 Percent Of The Lot Quantity. 4. Gas Cutting Permitted To Facilitate Loading. Location- Bin No- 231, Right Side Of Road No- 2.hsn Code- 72044900. Gst- 18 Percent. Note- Delivery On Actual Weighment Basis Only. Special Note: Overload Of The Carrying Capacity Of The Vehicle Will Not Be Permitted At The Time Of Taking Delivery

Description: CATEGORY: Steel loop hole of size 610 mm x 330 mm fabricated with U channel , Pre prefabricated Steel door confirming to IS 1038 1938 of size 900mm x1800mm , Door Window Loop hole lintel made out of ISA 50 x 50 x 6mm 910mm length will be provided over door and loop holes , Prefab steel Jali made up of ISA 30x30x3mm frame and 25x25x3mm , Mild steel Angle double shelf corner made out all parts of MS Angle 35x35x5mm with hold fast 130mm , Pre cast RCC beams 110x110x1420mm minimum M 25 Grade , Steel beam ISMB 125mm RSJ 125 X 70mm , Bitumen 80 20 VG 10 grade , Quick setting compound , Water proofing compound confirming , Load bearing concrete PCC Soild Blocks of size 400mm x 200 mm x 200 mm , APP Membrane for water proofing conforming to IS 1322 198 of size 20m x 0 90m , HDPE Sand Bag laminated , Oil Bound Distemper 1st quality of IVORY shade , Paint Synthetic Enamel 1st quality OG , 110mm dia UPVC SWR pipe single socketed pipe Type A , HDPE sheet for PCC , Interlocking Tiles , Aggregate 20mm , Aggregate 40mm , Manufactured sand , Thinner , Cement base paint , Cable PVC insulated and un sheathed single core size 2.5 sqmm , Cable PVC insulated and PVC sheathed 1100V grade twin core size 10sq mm , Flexible wire PVC insulated twin core twisted size 22 0.0076 , PVC casing caping pipe 25mmx16mm , PVC casing caping L bend 25mm , PVC casing caping T 25 x 16mm , PVC casing caping Elbow 25 x 16mm , PVC casing caping square box 4 x 4 , CP Screw 20 mm , MS Screw 35 mm , MCB single pole 230V AC 50 Hz 6 Amps , Modular Switch one way 6 AMPs , Modular socket 6A 2 3 pin , White cover plate , Metal flush box , LED Tube light fitting 1 x 18W and 4 feet long , PVC ceiling rose 2 3 Terminal , Insulation tape 2 cm , Main switch 16 Amps , MCB distribution board in sheet metal , Modular socket 16A 2 3 , MCB single pole 230V AC 50 Hz 16 Amps , PVC Rawal Plug , PVC Body Exhaust fan 250mm , Two Tier Sleeping Bunks Two tier sleeping bunks as per drawing attached as Appx J , Waste Bin 60 Ltr Dia 240 X 275 Top , Looking Mirror 1200X750X3.5mm thick , Hanger stand 450mm , Brick Trowel Steel 305 mm , Brick Hammer , Aluminium straight edge 50mm , Plaster Trowel with hard , Galvanised Iron Pan Mortar Tasla , Fish line , Plumb Bob Iron , Rammer Earth with 6 long , Picks Axes with Chiesel and Point ends , Showel Square Nose 14 Gauge TATA , Phowrah with hard wooden , Painting Brush 100 mm , Multipurpose No Slip Rubber Reusable Gloves , Aluminium Spirit level 12 inch , Water Leveling pipe PVC 50 mtr , Cutting plier insulates 6 inch , Measuring Tape 15 Mtr , Heating Device Kerosene Based , Fire extinguisher 2 Kgs capacity AB MAP 90 , Earthing Electrode Prefabricated gel Earthing electrode of pipe in pipe technology. , GI Pipe 100 mm dia , Back filled compound , MS earth pit cover of , Aluminium strip of , Iron spikes 16 inch long complete , GI strip of size 32 x 6mm 3.00m long , GI nipple 20mm dia , GI reducer socket 40x20mm , Lightning air terminal A copper tube 150 cm long x 25 mm dia with five copper prongs of length 15cm each fixed to copper ball of dia 50mm and 4mm thick , MS clamp 40x2mm , GI wire 12 gauge , Earth Augur , PVC Pipe 3m , User manual , Tester set Meger , GI Pipe medium grade of 40mm dia 6 mtr long and one equal socket of 40mm dia , Natural sand conforming to IS 383 1970 Specifications for coarse and fine aggregates , GI Pipe 40 mm bore , 50 mm bore GI Pipes sleeve , Crystaline Condcutive Mixture CCM

Description: CATEGORY: Cement bag 43 grade OPC in polythene bags weighing 50 Kgs , Sand Coarse , Crushed stone aggregate 40mm graded , Crushed stone aggregate 20mm graded , RR stone , Hard core of broken stone aggregate of size 45 to 63 mm , Foundation bolts MS galvanised alongwith nuts and washer 450mm long and 12mm dia , Foundation brackets MS 210 x 150 x 100mm , Bolt MS galvanised M10 x 50mm with nuts and double washer 2mm , Bolt MS galvanised M10 x 120mm with nuts and double washer 2mm , Bolt MS galvanised M10 x 100mm with nuts and double washer 2mm , Bolt MS galvanised M10 x 75mm with nuts and double washer 2mm , Bolt MS galvanised M10 x 125mm with nuts and double washer 2mm , Double Bunk of size 1800mm x 900mm , Mattress 1800mm x 900mm with two layers each 50mm thick , Fire extinguisher 06 Kgs ABC Dry powder stored pressure type , Automatic ignition Kero Room Heater Fuel tank capacity 18 Ltr with fuel indication gauge , Large steel almirah Half Hanging of size 1985 x 920 x 485mm 1 point 0 mm steel body , Water dispenser Hot cold and normal water 20 Ltr capacity with Jar of 20 Ltr , Detachable Rack 400mm x 125mm , Tarpaulin Plastic film water proof cover Size 30 x 30 Colour OG , Solar hand held Lantern light , Lightning Conductor and earthing made of copper tube150cm x 25mm dia with five copper prongs of length 15cm , Fd Water Heating Eqpt Solar or K Oil Based with 500 ltr tank capacity , Solar Street Light 25W including pole having length 5 mtr long , Complete set of Repair kit packed in one steel box with lock and key , 20W LED tube light fitting 230v , Bulk head fitting with 9 Watt LED Bulb , Moduar Switch Socket combine 15 Amp , Moduar Switch Socket combine 5 Amp , PVC casing and capping of size 25 mm , PVC casing and capping of size 25 mm TEE , PVC casing and capping of size 25 mm Elbow , PVC casing and capping of size 25 mm Common for Joints , Wire Single Core Copper Conductor 1 Point 5Sqmm , Star Headed screws 1 inch , MCB 10 32 Amp SP , Elect Wire two Core copper Conductor 6 Sqmm , Elect Wire 2 Point 5 Core copper Conductor , Ceiling Rose 2 to 3 terminals , Change over switch 32 Amp , PVC Pipe 110 MM Dia x 20 long , CGI Sheet 3000mm x 900mm x 22 , GI pipe 50mm dia and 2400mm , FRP IWC with foot rest and S or P trap , PVC Bend 110 MM dia , PVC Tee 110 MM dia , PVC P Trap 110mm , PVC Socket 100MM dia , PPR Gate valve 32mm outer dia , PPR Tank connector inner dia 32 mm , PPR Elbow 32mm dia , PPR TEE 32mm dia , Sealing thread , PPR Tee reducer 15x 25 mm inner dia , PPR pipe PN 16 SDR 7 Point 4 and 3 Layer 20mm , PPR pipe PN 16 SDR 7 Point 4 and 3 Layer 32 mm dia , PPR Union 32mm dia , PPR Socket 32mm dia , PPR Elbow 20mm , PPR Socket 20mm , PPR Reducer socket 32mm x 20mm , Long body Bib cock chromium plated 15mm dia , PPR Wall Clamp dia 25mm , HDPE PVC water Tank 1000Ltrs , Pre fabricated Tank staging MS angle iron frame of size 1 Point 50 x 1 Point 50 x 2 Point 50 Mtr , Silicon Gun Machine for applying silicon tube with ISI mark , Silicon tube 200gm , Reinforced Nyloguard 9 Point 00 x 9 Point 00 Mtr , Adhesive SR 998 , Drilling Machine , Mason thread nylon 3mm dia x 100 Mtr long Roll , Adjustable spanner 10 , Screw Driver Make , Screw driving machine Make , Self supporting aluminium step ladder 6 height , Trawal Brick 250mm , Plier side cutting , Phawarh 915mm with wooden handle , Shovel hand GS 12 1 Point 6 Kg with fibre handle , Measuring tape 5mtr retractable

Description: CATEGORY: Steel loop hole of size 610 mm x 330 mm fabricated with U channel , Pre prefabricated Steel door confirming to IS 1038 1938 of size 900mm x1800mm , Door Window Loop hole lintel made out of ISA 50 x 50 x 6mm 910mm length will be provided over door and loop holes , Prefab steel Jali made up of ISA 30x30x3mm frame and 25x25x3mm , Mild steel Angle double shelf corner made out all parts of MS Angle 35x35x5mm with hold fast 130mm , Pre cast RCC beams 110x110x1420mm minimum M 25 Grade , Steel beam ISMB 125mm RSJ 125 X 70mm , Bitumen 80 20 VG 10 grade , Quick setting compound , Water proofing compound confirming , Load bearing concrete PCC Soild Blocks of size 400mm x 200 mm x 200 mm , APP Membrane for water proofing conforming to IS 1322 198 of size 20m x 0 90m , HDPE Sand Bag laminated , Oil Bound Distemper 1st quality of IVORY shade , Paint Synthetic Enamel 1st quality OG , 110mm dia UPVC SWR pipe single socketed pipe Type A , HDPE sheet for PCC , Interlocking Tiles , Aggregate 20mm , Aggregate 40mm , Manufactured sand , Thinner , Cement base paint , Cable PVC insulated and un sheathed single core size 2.5 sqmm , Cable PVC insulated and PVC sheathed 1100V grade twin core size 10sq mm , Flexible wire PVC insulated twin core twisted size 22 0.0076 , PVC casing caping pipe 25mmx16mm , PVC casing caping L bend 25mm , PVC casing caping T 25 x 16mm , PVC casing caping Elbow 25 x 16mm , PVC casing caping square box 4 x 4 , CP Screw 20 mm , MS Screw 35 mm , MCB single pole 230V AC 50 Hz 6 Amps , Modular Switch one way 6 AMPs , Modular socket 6A 2 3 pin , White cover plate , Metal flush box , LED Tube light fitting 1 x 18W and 4 feet long , PVC ceiling rose 2 3 Terminal , Insulation tape 2 cm , Main switch 16 Amps , MCB distribution board in sheet metal , Modular socket 16A 2 3 , MCB single pole 230V AC 50 Hz 16 Amps , PVC Rawal Plug , PVC Body Exhaust fan 250mm , Two Tier Sleeping Bunks Two tier sleeping bunks as per drawing attached as Appx J , Waste Bin 60 Ltr Dia 240 X 275 Top , Looking Mirror 1200X750X3.5mm thick , Hanger stand 450mm , Brick Trowel Steel 305 mm , Brick Hammer , Aluminium straight edge 50mm , Plaster Trowel with hard , Galvanised Iron Pan Mortar Tasla , Fish line , Plumb Bob Iron , Rammer Earth with 6 long , Picks Axes with Chiesel and Point ends , Showel Square Nose 14 Gauge TATA , Phowrah with hard wooden , Painting Brush 100 mm , Multipurpose No Slip Rubber Reusable Gloves , Aluminium Spirit level 12 inch , Water Leveling pipe PVC 50 mtr , Cutting plier insulates 6 inch , Measuring Tape 15 Mtr , Heating Device Kerosene Based , Fire extinguisher 2 Kgs capacity AB MAP 90 , Earthing Electrode Prefabricated gel Earthing electrode of pipe in pipe technology. , GI Pipe 100 mm dia , Back filled compound , MS earth pit cover of , Aluminium strip of , Iron spikes 16 inch long complete , GI strip of size 32 x 6mm 3.00m long , GI nipple 20mm dia , GI reducer socket 40x20mm , Lightning air terminal A copper tube 150 cm long x 25 mm dia with five copper prongs of length 15cm each fixed to copper ball of dia 50mm and 4mm thick , MS clamp 40x2mm , GI wire 12 gauge , Earth Augur , PVC Pipe 3m , User manual , Tester set Meger , GI Pipe medium grade of 40mm dia 6 mtr long and one equal socket of 40mm dia , Natural sand conforming to IS 383 1970 Specifications for coarse and fine aggregates , GI Pipe 40 mm bore , 50 mm bore GI Pipes sleeve , Crystaline Condcutive Mixture CCM

Description: 12274ms25b, 98050175, Quantity- 103.540 Mts Scrap Condemned Unserviceable Ms-gi-ci Rusted,corroded,dusted Mixed Scrap Of C And W,loco,p. Way,signal Interlocking Material Consisting Of All Type Of Sheets,boxes,ms High Gauge,pipes,footsteps,rings,strips,filters,trusses,patch Cut Parts,gutters,drum Clocks,distribution Boards,u Rack,boring Rod,ms Panel Body,ms Battery Charger Covers,hand Cuffs,driver Seat,hand Cart,push Trolley,packing Strips,ms Body Of Block Instrument,ms Boiler Coil Cut Pieces,42 U Rack Ms Body,ms Collapsible Gate,ms Termination Box,ms Bathroom Ventilator,ms Body Of Data Logger,ms Heater Coil,screen Guard,nuts,bolts,lavatory Doors,ms Carriage Doors,pins,rivets,links,rods,angle Cut Pieces,structural Frames,brackets,drums,cocks,basins,wire Meshes,wire Ropes,water Tank Cut Up Parts,casings,corrugated Sheets,filter Top And Bottom Caps,clamps,washer Plates,stands,frames,sheet Cuts,plate Cuts,joists,channels,bases,plates,flats Cut Pieces,vestibule Frames,window,door,shutters,head Stocks Cut Up Parts,broken T And P Items,racks,compensating Rings,bindings,washers,dust Bins,chains,berth Strips,gate Frames,iron Furniture,motor Bodies,screw Rods,levers,flats,rod Cut Pieces,trolley Wheels,gi Ducts,glow Sign Boards,ms Electrical Scrap,building Rods,packing Strips,ms Body Of Rru,air Cooler Empty Bodies,cbf Filter,corrugated Sheets,drums,blower Motor Frames,ucb Packing Frames,under Frame Cut Up Parts,berth Frames,supports,cylinder Blower Covers,valves,end Shield Covers,traction Motor Yokes,shafts,piston Rings,gears,brake Shoe Heads,brake Gear Items,straps,cotters,springs,equalizing Stays,fan Hub,end Shield,pinions,ms Covers,signal Arms,lc Gate Pipes,ladders,angles,signal Booms,rounds,signal Buckets,pulleys,fabricated Posts,signal Lamp Structures,liners,screws,spikes,air Brake Cylinders,brake Hangers,bss Hangers,battery Boxes,battery Containers,junction And Location Boxes,sleepers Cut Pieces,axle Counter Empty Box,dc-dp Ips Empty Rack ,sge Block Instrument Empty Box ,reset Counter Box,gps Clock ,42 V Rack,transformer Bay,ms Chain Pulley Blocks,beam Scale Parts,idly Cooker With Steam Generator Body,wheel Barrow,fry Pan Single Burner,ms Floor Stand,ms Sliders,ms Body Wet Grinder,fry Pan,jara,ms Ips Rack Rifle Safety Chain,ms Air Pump,foot Spray,antenna,spiral Binding Machine,ms Man Drill,trbc Covers,hand Cart Push Trolley,expresser Fan Guard,ms First Aid Box,hacksaw Frame,tool Box,tie Bars,ci Brake Blocks,composite Brake Blocks,ci Pulleys,buckets,ms Gear Wheels,gym Equipment,roti Maker,bicycle Parts,axle Box,bfr Cut Up Parts,grills,mesh,gate Wheels,girders Cut Pieces,collars,trolleys,foot Plates,signal Point Rods And Any Other Ms-gi-ci Material Present In The Lot With Or Without Attachments Of Nf,ss,rubber,nylon And Plastic. Ms Pan Mortars,wire Claws,wire Baskets,crow Bars,jim Crow,dip Lorry,weld Filling Body,sleeper Hooks,rail Dollies,rail Cutting Frames,augers,pick Axe,tongue For Rails,spades,beaters,ballast Rake,powrahs,rail Cum Road Mono Trolley,case Tin,h.s.lamps,rail Dolly Clips,shovels,trolley Wheels And Similar Gang Man Items Of Sorts And Sizes,with Or Without Attachments.fiber,glass,windows,frp Glass Windows,window Frames Of Sorts And Sizes,broken Or Unbroken,with Or Without Attachments Of Nf Window Shutters. [aluminium - 2 Percent] Note- 1. Nf Material,axles,wheel Discs,and Rails Or Material Not Mentioned In The Description,if Found During The Delivery Are To Be Returned To Railways. 2. Track And Track Fittings Running Through This Area Are Excluded. 3. Nf And Stainless-steel Attachments Are Approximately 0.1 Percent Of The Lot Quantity. 4. Gas Cutting Permitted To Facilitate Loading. Location- Bin No- 273 To 276, Left Side Of Road No- 2 Hsn Code- 72044900. Gst- 18 Percent. Note- Delivery On Actual Weighment Basis Only Special Note: Overload Of The Carrying Capacity Of The Vehicle Will Not Be Permitted At The Time Of Taking Delivery, As Per Motor Vehicle Act 1988

Description: 12274ms24j, 98050175, Quantity- 85.660 Mts Scrap Condemned Unserviceable Ms-gi-ci Rusted,corroded,dusted Mixed Scrap Of C And W,loco,p. Way,signal Interlocking Material Consisting Of All Type Of Sheets,boxes,ms High Gauge,pipes,footsteps,rings,strips,filters,trusses,patch Cut Parts,gutters,drum Clocks,distribution Boards,u Rack,boring Rod,ms Panel Body,ms Battery Charger Covers,hand Cuffs,driver Seat,hand Cart,push Trolley,packing Strips,ms Body Of Block Instrument,ms Boiler Coil Cut Pieces,42 U Rack Ms Body,ms Collapsible Gate,ms Termination Box,ms Bathroom Ventilator,ms Body Of Data Logger,ms Heater Coil,screen Guard,nuts,bolts,lavatory Doors,ms Carriage Doors,pins,rivets,links,rods,angle Cut Pieces,structural Frames,brackets,drums,cocks,basins,wire Meshes,wire Ropes,water Tank Cut Up Parts,casings,corrugated Sheets,filter Top And Bottom Caps,clamps,washer Plates,stands,frames,sheet Cuts,plate Cuts,joists,channels,bases,plates,flats Cut Pieces,vestibule Frames,window,door,shutters,head Stocks Cut Up Parts,broken T And P Items,racks,compensating Rings,bindings,washers,dust Bins,chains,berth Strips,gate Frames,iron Furniture,motor Bodies,screw Rods,levers,flats,rod Cut Pieces,trolley Wheels,gi Ducts,glow Sign Boards,ms Electrical Scrap,building Rods,packing Strips,ms Body Of Rru,air Cooler Empty Bodies,cbf Filter,corrugated Sheets,drums,blower Motor Frames,ucb Packing Frames,under Frame Cut Up Parts,berth Frames,supports,cylinder Blower Covers,valves,end Shield Covers,traction Motor Yokes,shafts,piston Rings,gears,brake Shoe Heads,brake Gear Items,straps,cotters,springs,equalizing Stays,fan Hub,end Shield,pinions,ms Covers,signal Arms,lc Gate Pipes,ladders,angles,signal Booms,rounds,signal Buckets,pulleys,fabricated Posts,signal Lamp Structures,liners,screws,spikes,air Brake Cylinders,brake Hangers,bss Hangers,battery Boxes,battery Containers,junction And Location Boxes,sleepers Cut Pieces,axle Counter Empty Box,dc-dp Ips Empty Rack ,sge Block Instrument Empty Box ,reset Counter Box,gps Clock ,42 V Rack,transformer Bay,ms Chain Pulley Blocks,beam Scale Parts,idly Cooker With Steam Generator Body,wheel Barrow,fry Pan Single Burner,ms Floor Stand,ms Sliders,ms Body Wet Grinder,fry Pan,jara,ms Ips Rack Rifle Safety Chain,ms Air Pump,foot Spray,antenna,spiral Binding Machine,ms Man Drill,trbc Covers,hand Cart Push Trolley,expresser Fan Guard,ms First Aid Box,hacksaw Frame,tool Box,tie Bars,ci Brake Blocks,composite Brake Blocks,ci Pulleys,buckets,ms Gear Wheels,gym Equipment,roti Maker,bicycle Parts,axle Box,bfr Cut Up Parts,grills,mesh,gate Wheels,girders Cut Pieces,collars,trolleys,foot Plates,signal Point Rods And Any Other Ms-gi-ci Material Present In The Lot With Or Without Attachments Of Nf,ss,rubber,nylon And Plastic. Ms Pan Mortars,wire Claws,wire Baskets,crow Bars,jim Crow,dip Lorry,weld Filling Body,sleeper Hooks,rail Dollies,rail Cutting Frames,augers,pick Axe,tongue For Rails,spades,beaters,ballast Rake,powrahs,rail Cum Road Mono Trolley,case Tin,h.s.lamps,rail Dolly Clips,shovels,trolley Wheels And Similar Gang Man Items Of Sorts And Sizes,with Or Without Attachments.fiber,glass,windows,frp Glass Windows,window Frames Of Sorts And Sizes,broken Or Unbroken,with Or Without Attachments Of Nf Window Shutters. [aluminium - 2 Percent] Note- 1. Nf Material,axles,wheel Discs,and Rails Or Material Not Mentioned In The Description,if Found During The Delivery Are To Be Returned To Railways. 2. Track And Track Fittings Running Through This Area Are Excluded. 3. Nf And Stainless-steel Attachments Are Approximately 0.1 Percent Of The Lot Quantity. 4. Gas Cutting Permitted To Facilitate Loading. At Two Locations- Bin No- 273 To 276 And Bin No 244, Left Side Of Road No- 2 Hsn Code- 72044900. Gst- 18 Percent. Note- Delivery On Actual Weighment Basis Only Special Note: Overload Of The Carrying Capacity Of The Vehicle Will Not Be Permitted At The Time Of Taking Delivery, As Per Motor Vehicle Act 1988

Details: CATEGORY: BOF N16-7-0 HOSE CLAMPS JUBILEE , BOF N5-9-14X43 PLATE LOCKING METRIC SIZES , BOF B6S-6X8 N2-18 SCREW HEXAGONAL , BOF N9-14-90-120-13 SEALING RING ROTATING SHAFTS WITH EXTERNAL CAPS , BOF 6111023-2 NUT , BOF 61C1908 NUT FABRICATED , BOF N5-14-MB6 WASHER SHAKE PROOF EXTERNAL TYPE MB METRIC SIZES N5-14-MB6 , BOF 6125372-2 CHAIN , BOF 6107526 , BOF 6186250 CLIP DOUBLE BRAKE HOSE FRONT , BOF N9-14-15- 30-10 RING SEALING , BOF 6146252 WINDOW , BOF 6112185 PAWL , BOF 6164944 PIN , BOF 6002333 HANDLE CLAMPING SEAT PILLER , BOF 5054251 BAR ANCHOR CHAIN , BOF 6141499 BRAKE INSTALLATION SOCKET WWELDING , BOF 6108646 SHAFT , BOF 6148329 SPRING , BOF 6186251 CLIP DOUBLE BRAKE HOSE REAR , BOF 6108624 SPRING , BOF 6126916 ROD , BOF N15-28-13 T-COUPLING , BOF 6135096 5360-040856 SPRING RAMMER , BOF 5049698-2 DOG , BOF 6343514 SPRING , BOF 6103127 SPRING , BOF 6135336 SPRING , BOF 5048790 SPAINER , BOF 6116587 COVER , BOF 6110070 SPRING PAWL , BOF 6115945 SPACER , BOF 6115425 5360-007169 SPRING STRIKER INNER , BOF N5-14-MB5 WASHER SHAKE PROOF , BOF 6116629 WASHER HAND PUMP , BOF 6096697 PLATE RIGHT , BOF 6110070-2 SPRING PAWL , BOF 6131947 NUT , BOF 6096698 PLATE LEFT , BOF 6115659 CLIP , BOF 6112141 SPRING RAMMER STOP PAWL PLUNGER , BOF 6101594 CLIP , BOF 6181673 SIGN , BOF 6108621 SHIM , BOF 6108161 KNOB , BOF 6168234 PLUNGER , BOF 6046763 HANDLE , BOF 6118824 BOLT SECURING , BOF 6038322 PLUG , BOF N5-22-94 CLIP SPRING N5-22-94

Details: 1)Imp Estimate for newly proposed 25 KVA DT ( kandarvilagam V ) in vaniagudi # due to improve the tail end voltage in vaniagudi area and to reduce the kandarvilagam ss1 250 KVA DT load and LT length under chemponvilai section. 2)Imp Estimate for newly proposed 25 KVA DT ( kandarvilagam V1 ) in vaniagudi # due to improve the tail end voltage in kandarvilagam area and to reduce the kandarvilagam ss1 250 KVA DT load and LT length under chemponvilai section. 3)Imp Estimate for newly proposed 25 KVA DT ( kuttithoppu ss ) in vaniagudi # due to improve the tail end voltage in kuttithoppu area and to reduce the irumpuli ss V1 100 KVA DT load and LT length under chemponvilai section. 4) Imp Estimate for newly proposed 25 KVA DT ( saralvilai ss ) in vaniagudi # due to improve the tail end voltage in saralvilai area and to reduce the paansilai ss 63 KVA DT load and LT length under chemponvilai section. 5)Imp Estimate for newly proposed 1 no 63 KVA DT in pandaravilai charode feeder due to improving tail end voltage in pandaravilai area reduce the overload existing pandaravilai ss1 /100 KVA under Eraniel section. 6)Imp Estimate for providing 1 no 63 KVA DT in the existing pillaiyarkovil ss V1 /100 KVA to avoid LT low voltage at location of periyavilai ss 111 under manavalakurichy section. 7)Imp Estimate for providing 1 no 11 KV AB switch into centre rotating AB switch in 11 KV Eraniel feeder at vattam under Eraniel section. 8)Imp Estimate for 12 nos 8m deteriorated pole into 9m psc pole in 11 KV vellichandai feeder and 11 KV kadiapattnam feeder location at Asarimar street under manavalakurichy section. 9)Imp Estimate for provision of 1 no AB switch and strengthening of conductor in 11 KV vellichandai feeder to provide backfeeding arrangement between 11 KV vellichandai feeder and 11 KV kadiapattnam feeder at Asarimar street under manavalakurichy section. 10)Imp Estimate for deteriorated 1 no 11 KV cheramangalam AB switch into 11 KVcentre rotating AB switch in 11 KV mondaikadu feeder under manavalakurichy section. 11)Imp Estimate for 16 nos 8m RCC poles into 9m PSC poles in 11 KV colachel feeder in various location under colachel section. 12)Imp Estimate for 1 no 63 KVA DT an improving tail end voltage at kandanvilai RC church under Eraniel section. 13)Imp Estimate for 1 no 63 KVA DT in the existing thingalchanthai ss 250 KVA to improving tail end voltage at sunaparai under Eraniel section. 14)Imp Estimate for replacement of corrded 3 nos teak wood poles into 9m psc poles and 9 nos 9m insertion psc poles insertion in various locations under vellichandai section. 15)Imp Estimate for replacement of corrded 3 nos 9m psc poles and 9 nos corrded 8m poles and 6 nos 8m psc poles insertion in various locations under vellichandai section. 16)Imp Estimate for newly proposed 25 KVA DT asad nager ss 111 in asad nager area to reduce the asad nager ss 11 100 KVA DTs load and LT length under colachel section. 17)Imp Estimate for 1 no 63 KVA DT in the existing chekkala street ss 250 KVA overloading voltage at location chekkala street area under Eraniel section. 18)Imp Estimate for strengthening of aged conductor 7/3.35 into 7/4.09 in 11 KV colachel feeder from sasthankarai ss 1V 100 KVA to poolankarai ss 100 KVA under colachel section. 19)Imp Estimate for newly proposed 11 KV centre rotating AB switch in 11 KV thickanamcode feeder for backfeeding arrangement under chemponvilai section. 20)Imp Estimate for deteriorated 1 no 11 KV kootumangalam AB s into centre rotating AB switch in 11 KV IRE feeder under manavalakurichy section. 21)Imp Estimate for deteriorated 1 no 11 KV padarnilam AB s into centre rotating AB switch in 11 KV kadiapattinam feeder under manavalakurichy section. 22)Imp Estimate for 1 no 9m PSC pole into fabricated RSJ pole in loc F11/9 Alwarcoil ss1 under Eraniel section. 23)Imp Estimate for 1 no 9m PSC pole into fabricated RSJ pole in loc F11/11 mylode ss under Eraniel section. 24)Imp Estimate for 1 no 9m PSC pole into 40’ fabricated RSJ pole in loc F1/9 sundavilai ss1 under Eraniel section. 25)Imp Estimate for strengthening of existing HT conductor ACSR 7/3.35 into ACSR 7/4.09 at kootumangalam AB s to EB office ABs in IRE feeder under manavalakurichy section. 26)Imp Estimate for newly proposed linkline of 11 KV lakshmipuram feeder and linkline between CPVI ss VCB AB switch in 11 KV colachel feeder under chemponvilai section. 27)Imp Estimate for newly proposed 2 nos 25 KVA DT mathavilai ss 1V and V in mathavilai area to avoid over load mathavilai ss 100 KVA DT load and LT length under manavalakurichy section. 28)Imp Estimate for replacement of deteriorated structure in kurumpani ss 111 /100 KVA in palapallam feeder under chemponvilai section. 29)Imp Estimate for the conductor strengthening of Thirunainarkurichy # from ammandivilai junction to mavilai ss 1 /63 KVA for improving tail end voltage reduce the load of vellichandai # under vellichandai section. 30)Imp Estimate for replacement of deteriorated structure in muttom ss V 100 KVA in muttom light house # under vellichandai section. 31)Imp Estimate for strengthening of existing 7/3.35 into 7/4.09 in location of kadiapattinam # under manavalakurichy section. 32)Imp Estimate for newly proposed 1 no 63KVA DT mathicode 11 in palapallam feeder under chemponvilai section. 33)Imp Estimate for the conductor strengthening of existing HT aged conductor ACSR 7/2.59 into ACSR 7/4.09 at west neyoor junction to periyapalli ss 1 /100 KVA in bethelpuram # under chemponvilai section. 34)Imp Estimate for replacement of deteriorated structure in pidagai ss 1 100 KVA in palapallam # under chemponvilai section. 35)Imp Estimate for newly proposed 1 no 63KVA DT pothayanvilai ss area in palapallam feeder under chemponvilai section.