Fabrication Tenders

Details: Description :set Of End Construction For 3 Phase Memu/tc Medha Coaches, As Per Drawing: mp23end3ph Version 0, Packing Instruction: 1. The Supplier Shall Pack The End Wall In A Suit ably Designed Returnable Fixture In Such A Way That End Wall Shall Not Get Scratched, damaged, Twisted During Transportation, Storage And Lifting And To Avoid Scratches O n Outer Surface. It Should Be Seperated By Suitable Environment Friendly Blocks To Ava oid Rubbing Of Two Endwall Surfaces . It Should Have Standard Clamping /fastening Me chanism So That It Can Be Opened Easily. It Should Have Firm's Identification Mark. 2. Firs t Returanable Fixture Along With End Wall Be Retained By Rcf & This Fixture Shall Be Ex changed In The Second Lot Supply And So On. At The End Of The Contact, The Firm Shall C ollect The Remaining Returnable Packing Fixture From Rcf. 3. The Packing Fixture/frame to Be Fabricated Having Sufficient Strenght To Bear Approximate 2 Tonne Load In Static & Moving Condition Of Two Coach Sets Of End Wall. 4. The Fixture /frame/pallet Should be Designed So That The Packed End Wall Preferably Remain In Vertical Position To Minim ize Surface Area. 5. It Should Also Be Suitable For Storage Of End Wallunder Open Sky. [ warranty Period: 30 Months After The Date Of Delivery ] ]

Description: CATEGORY: HDPE laminated Sand Bag of size 75x40 cm Sand colour and each bag having weight not less than 60 gms , SHS 6 mm thick size 120x120mm x 2.1m long for column with holes as per tech spec , ISMB 150 RSJ 150 x 75 mm G1 3050mm long for beam conforming to relevant IS as per tech spec att , ISMB 150 RSJ 150 x 75 mm G3 400mm long for beam conforming to relevant IS as per tech spec att , ISMB 125 RSJ 125 x 70mm G2 3.0m long for beam conforming to relevant IS as per tech spec att , 6mm thick MS plate 150x150mm for SHS column incl welding and nuts and bolts , 12mm dia nut bolt 75mm long inserted in 12mm dia eight nos hole in each column , Steel Roofing Trough of size 1700 mm x 613 mm x 180 mm made out of 2 mm thick as per tech spec att , MS hexagonal nuts Bolts and washers 12 mm dia 40 mm long. , LDPE sheet 3 m wide weighing 1.00 Kg per RM black in colour and shall contain as per tech spec att , Red Oxide primer conforming to relevant IS , Synthetic Enamel Paint Colour Green Ist quality conforming to relevant IS as per tech spec att , Thinner as per as per tech spec att . Sample to be approved before supply. , Dry distemper as per tech spec att. Sample to be approved before supply , Chalk whiting as per tech spec attSample to be approved before supply , Paint Brush 4 inch Make Amar or Lucky Sample to be approved before supply , Pre fabricated double shutter steel door of size 1100mm x1950mm made out of 2mm thick MS black carbon sheet as per tech spec att , Supply of Swivel Bullet proof glass glass 610mm x300mm size 72 mm thick as per tech spec att , Silicone Gel sealent of 01 pack of 400 gms including aplicator gun , Ply wood 10 mm thick as per requirement for flat surface , Foundation bolts of 16 mm dia and 250 m long with nut bolts washer etc. , Stone Aggregate to be crushed rock or gravel 20mm graded confirming to relevant IS , Manufacturing sand confirming to relevant IS as per tech spec att , Stone Aggregate to be crushed rock or gravel 40mm graded confirming to relevant IS as per tech spec att , Rapidite quick setting liquid. , Integrated water proofing compound. , Aluminimum straight edge 50mm squre 2mm thick 1800mm long , wooden Flat Gurmala , Water leveling pipe PVC 100 mtr , Hand Rivet Gun machine , Drill bit 6mm dia , Drill bit 8mm dia , Tape measuring metallic 30 M , Mason trowel , Tasla Iron 18 inch , Shovel with wooden handle , Axe Picks with wooden handle , Fawda with wooden handle , Crobar 5 feet long , Rammer with wooden handle of WT 5 10 KG , Sieve for sieving fine and crose AGG 900 x 1500mm made of angle iron frame with stand , Brick Hammer 1 and 2 Kgs , Cutting plier Insulate 6 inch , Screw Driver 12 inch with insulated plastic , Pipe Wrench 12 inch , Pipe Wrench 18 inch , Adjustable spanner 12 inch , Hacksaw frame with 2 Blade , Hand Gloves Canvas with ISI Mark , Aluminium Sprit level 6 inch , Brick Line , Plumbob

Description: CATEGORY: Cement OPC 43 Grade packed in HDPE bag each 50 Kg wt conforming to IS 8112-1989 Make-Birla Gold,Ambuja,Ultratech, ACC,JK or Dalmia under Job No 2504 AGS PD as per store list att , Stone boulder 9 inch to 12 inch , Coarse Aggregate 40 to 63mm , Coarse sand free from vegetation , Coarse Aggregate 20mm graded , Coarse Aggregate 40mm graded , Mild steel Bar of size 6 to 8 mm dia conforming to IS 432 Part I 1982 Make- Tata,Sail,JSW , Water proofing compund conforming to IS 2645-2003 Make- Pidilite,Dr Fixit,Fevicol , Quick setting compound Make- Pidiite,Quick Fix,Fevicol , PBS Roll 20m Long , Width of 0.9Mtr ISI Marked with Min weight of 34 Kgs oblique Roll , GI binding wire TATA,Sail,JSW , Cement based paint Snowcem Make-Berger,Asian,Nerolac , Slack lime , Painting brush 4 inch ISI Marked , HDPE sand Bags khaki colour of size 30inch x 15inch inside laminated interlocking stiched, weight of the each bag should not be less then 42-45 gms oblique Bag , Anti corrosive Red Oxide zinc chromate primer conforming to IS-5-2004 Make-Asian,Berger,Neroloc , Synthetic paint enamelled OG conforming to IS 5-2004 Make- Asian,Berger,Nerolac , Thinner Make-Nerolac,Berger,Asian , SRT 2440 x 613 x 180 , 2 mm thick MS Sheet Hot Rolled Steel with nuts and bolts incl One coat of Red Oxide Make- TATA, SAIL,JSW , ISMB hot rolled 200x100mm and 4 mtr long Make-TATA,SAIL,JSW , Prefeb mild steel door of size 750x 1800mm double shutter, outer frame made out of ISA 40x 40x6mm and door shutter frame of Make-Tata,Sail,JSW as per store list , Mild steel Bar of size 6 to 8 mm dia conforming to IS 432 Part I 1982 Make-Tata,Sail,JSW , Loop Holes 780 x 300 mm Make-TATA, SAIL,JSW , Loop Holes 1000 x 300 mm Make-TATA, SAIL,JSW , Loop Holes 1250 x 300 mm Make-TATA, SAIL,JSW , Ventilator Steel 600x450 mm will be fabricated using ISA 35x35x6mm for outer frame and ISA 30x30x3mm Make-TATA, SAIL,JSW as per store list , Wooden planks for shuttering IInd class wood of size 3.0 x 0.30 x 0.026m , Wooden scantling various size , Nails various size , Air terminal single pointed aluminium rod 12mm dia and 300mm long , Testing point terminal block make of Gun metal and phosphorus bronze size 75x75x25mm drilled and screwed including 3 Nos 8mm dia 25mmas per store list , Aluminium strips 25x3mm. , Galvanised iron strip 32x6mm. , Funnel fitted with 20mm dia GI Pipe 1.5m long Make-Jindal, Tata, Kalinga , Earthing Plate 600x600x6mm GI steel suitable for GI strip fittings, drilled with two nos holes for 6 mm dia near one side , CI earth pit cover of size 300x300x6mm with angle iron of size 20x20x3mm thick with MS frame , Insulating PVC block 75x75x30mm with insulating clamp nut and bolt Make- Presto,Polycab, Finolex , Charcoal , Salt

Description: CATEGORY: Cement OPC 43 Grade packed in HDPE bag each 50 Kg wt conforming to IS 8112 1989 Make Birla Gold or Ambuja or Ultratech or ACC or JKJ Dalmia , Stone boulder 9inch to 12inch , Coarse Aggregate 40 to 63mm , Coarse sand free from vegetation , Coarse Aggregate 20mm graded . , Coarse Aggregate 40mm graded , Mild Steel Bars of size 6 to 8 mm dia Conform to IS 432 Part 1 1982 TMT Bar Make TATA or SAIL or JSW , Water proofing compund conforming to IS 2645 2003 Make Pidilite or Dr Fixit or Fevicol , PBS Roll 20m Long Width of 0 point 9Mtr ISI Marked with Min weight of 34 Kgs per Roll , GI binding wire TATA or SAIL or JSW , Cement base paint Scowcem Make Berger or Asian or Nerolac , Slack Lime , Painting brush 4inch ISI Marked , HDPE Sand bags khaki colour of size 30inchx15inch inside laminated interlocking stiched weight of the each bag as per TS , Anti corrosive red oxide zinc chromate primer confirming to IS 5 2004 Make Berger or Asian or Nerolac , Synthetic Paint enamelled OG confirming to IS 5 2004 Make Berger or Asian or Nerolac , Thinner Make Nerolac or Berger or Asian , SRT 2440 x 613 x 180 2 mm thick MS Sheet Hot Rolled Steel with nuts and bolts incl One coat of Red Oxide Make TATA or SAIL or JSW , SRT 1840 x 613 x 180 2 mm thick MS Sheet Hot Rolled Steel with nuts bolts incl One coat of Red Oxide Make TATA or SAIL or JSW , ISMB hot rolled MS 200 x 100 4M Make TATA or SAIL or JSW , Prefab mild steel door of size 750x1800mm double shutter outer frame made out of ISA 40x40x6mm as per TS , Mild Steel Bars of size 6 to 10 mm and above dia conforming to IS 432 Part I 1982 Make TATA or SAIL or JSW , Loop Holes 780 x 300 mm Make TATA or SAIL or JSW , Loop Holes 1000 x 300 mm Make TATA or SAIL or JSW , Loop Holes 1250 x 350 mm Make TATA or SAIL or JSW , Ventilator steel 600x450mm will be fabricated using ISA 35x35x6mm for outer frame and ISA 30x30x3mm as per TS , Wooden plank for shuttering II class wood of size 3 point 0 x0 point 3 x0 point 026 m , Wooden Scantling various size , Nails various sizes , Air terminatoin single pointed aluminium rod 12mm dia and 300mm long , Testing point terminal block made of gun metal phosphorus bronze size 75x75x25mm drilled and screwed as per TS , Aluminium strips 25x3mm , Galvanised iron strip 32x6mm , Funnel fitted with 20mm dia GI Pipe 1 point 5m long Make Jindal or Tata or Kalinga , Earthing Plate 600x600x6mm GI steel suitable for GI strip fittings drilled with two nos holes for 6 mm dia near one side , CI earth pit cover of size 300x300x6mm with angle of size 20x20x3mm thick with MS frame , Insulating PVC block 75x75x30 mm with insulating clamp nut bolt Make Presto or Polycab or Finolex , Charcoal , Salt

Details: Set Of Crash Buffers For Vande Bharat Rake (crashworthy Design) Note:-fir m Shall Collect All Latest/final Specification/drawings Before Manufacturing. There M ay Be Minor Modification In Design., As Per Drawing: Mp24cbvb Version 0, Packing Instruction: set Of Side Buffer Assly. (helical Spring Type) (lh&rh) For Lhb Coach 1. The Packing Fixtu re/frame To Be Fabricated Having Sufficient Strength To Bear Approximate Weight Of Ei ght Nos. Of Side Buffer Assly. (helical Spring Type, Lh&rh). 2. The Supplier Shall Pack The set Of Side Buffer Assly. (helical Spring Type, Lh&rh) In Such A Way That This Set Should not Get Scratched, Damaged, Twisted During Transportation, Storage And Lifting. To Av oid Scratches On Outer Surface, It Should Be Wrapped With Environment Friendly Mater ial. 3. The Fixture/frame/pallet Should Be Designed So That The Packed Side Buffer Assly. (helical Spring Type, Lh&rh) Remains Preferably In Vertical Condition To Minimize Surfac e Area. 4. First Returnable Pallet Along With Set Of Side Buffer Assly. (helical Spring Typ e, Lh&rh) Will Be Retained By Rcf & This Pallet Shall Be Exchanged In The Next Lots Of Su pply. 5. It Should Be Suitable For Storage Of Side Buffer Assly. (helical Spring Type, Lh&r h) Under Open Sky. Firm's Identification Mark Should Be On The Packing Fixture/frame. Al ong With Complete Details Of Items I.e Description & Drg. No. And Plnos. ]

Details: End Wall Assembly Not:-"mig Welding (131) Is To Be Read As Tig Welding (141) ", As Per Drawing: Lg15195alt'd' & Mdts 21332 Ver 0 Alongwith Shutter Complete /lock Asse Mbly To Drg.no. 2 10113.0.76.300.012 Alt'-r1' & Lw44318 Alt'c'., Packing Instruction: 1. The Sup Plier Shall Pack The End Wall In A Suitably Designed Returnable Fixture In Such A Way Th At End Wall Shall Not Get Scratched, Damaged, Twisted During Transportation, Storag E And Lifting And To Avoid Scratches On Outer Surface. It Should Be Wrapped With Envir Oment Friendly Material And It Should Have Standard Clamping /fastening Mechanism So That It Can Be Opened Easily. It Should Have Firm's Identification Mark. 2. First Returanable Fixture Along With End Wall Be Retained By Rcf & This Fixture Shall Be Exch Anged In The Second Lot Supply And So On. At The End Of The Contact, The Firm Shall Col Lect The Remaining Returnable Packing Fixture From Rcf. 3. The Packing Fixture/frame To Be Fabricated Having Sufficient Strenght To Bear Approximate 2 Tonne Load In Static & Moving Condition Of Two Coach Sets Of End Wall. 4. The Fixture /frame/pallet Should Be Designed So That The Packed End Wall Preferably Remain In Vertical Position To Minimize Surface Area. 5. It Should Also Be Suitable For Storage Of End Wallunder Open Sky. [ Wa Rranty Period: 30 Months After The Date Of Delivery ] ]

Details: Set Of Crash Buffers For Vande Bharat Rake (crashworthy Design) Note:-fir M Shall Collect All Latest/final Specification/drawings Before Manufacturing. There M Ay Be Minor Modification In Design., As Per Drawing: Mp24cbvb Version 0, Packing Instruction: Set Of Side Buffer Assly. (helical Spring Type) (lh&rh) For Lhb Coach 1. The Packing Fixtu Re/frame To Be Fabricated Having Sufficient Strength To Bear Approximate Weight Of Ei Ght Nos. Of Side Buffer Assly. (helical Spring Type, Lh&rh). 2. The Supplier Shall Pack The Set Of Side Buffer Assly. (helical Spring Type, Lh&rh) In Such A Way That This Set Should Not Get Scratched, Damaged, Twisted During Transportation, Storage And Lifting. To Av Oid Scratches On Outer Surface, It Should Be Wrapped With Environment Friendly Mater Ial. 3. The Fixture/frame/pallet Should Be Designed So That The Packed Side Buffer Assly. (helical Spring Type, Lh&rh) Remains Preferably In Vertical Condition To Minimize Surfac E Area. 4. First Returnable Pallet Along With Set Of Side Buffer Assly. (helical Spring Typ E, Lh&rh) Will Be Retained By Rcf & This Pallet Shall Be Exchanged In The Next Lots Of Su Pply. 5. It Should Be Suitable For Storage Of Side Buffer Assly. (helical Spring Type, Lh&r H) Under Open Sky. Firm's Identification Mark Should Be On The Packing Fixture/frame. Al Ong With Complete Details Of Items I.e Description & Drg. No. And Plnos. [ Warranty Perio D: 30 Months After The Date Of Delivery ] ]

Description: CATEGORY: with louver shutter , Pendent holder made of bakelite , LCs complete set with all accessories , Elect earthing set with complete set , Hot water boiler of capacity 500Ltrs , PUF Insulated 55mm thick water tank 1000 Ltrs with GI flange , Water staging platform made of MS Angle of size 40x40x6 mm , PPR Pipe 20mm dia , PPR Pipe 25mm , PPR Tee 20mm , PPR Tee 25mm , PPR Elbow 90 degree 20 mm , PPR Elbow 25mm , PPR Elbow 90 degree 25mm , PPR male threaded socket 20 to15 mm dia , PPR Female threaded socket 20 to15 mm dia , PPR Female threaded elbow 20 to15 mm dia , PPR Male threaded elbow 20 to15 mm dia , PPR socket 20mm dia , PPR socket 25mm dia , PPR Union 20mm , PPR Union 25mm , PPR reducer 25x20mm , PPR reducer Tee 25x20mm , Bib tap brass chromium plated sutable for 15mm PPR water supply line , PPR Balve Valve Light Weight Brass 25 mm , PPR Balve Valve Light Weight Brass 20 mm , PPR Balve Valve Light Weight Brass 15 mm , PVC Clip for PPR pipe 25mm dia , PVC Clip for PPR pipe 20mm dia , PPR reducer Elbow 25x20mm , PPR Male threaded Tee 25x20mm , Pillar cock brass chomium plated , Taeflon tape , PVC Float value heavy duty 25mm dia suitable for PPR pipe , 25mm PP to R Tank Connector , Pre fabricated septic tank of 2000 ltrs capacity and Septic tank shall be anchored with hold , Prefabricated soakage pit of 1000 ltr capacity and Soakge pit shall be anchored with hold fast , PVC Pipe 4 inch dia 6 mtr long heavy duty type A having 5 kg pressure oblique sqcm , PVC Socket 4 inch dia , PVC Elbow 4 inch , PVC Tee 4 inch , PVC Floor Trap 4 inch dia with grating 4 inch outlet , IWC stainless steel PVC P Trap inlet 4 inch dia with 4 inch outlet , PVC Flusing cistern 10 ltrs capacity with PVC Connection and waste pipe Angle and PVC pipe , Stop Cock CP 25 mm , Wash Hand Basin 500x400mm Steel with Waste pipe and Coupling alongwith 02 Nos CI Bracket with screw PVC Connection 450mm long , Vitreous China bowl Urinal flat back white of size 465x355x265 mm , Looking Mirror size 450 x 600 x 5 point 5 mm thick with 4 mm ply backing and aluminium L Section frame , Stainless steel peg stay contains 4 hooks fancy type , Soap dishes stainless steel size 10cmx12cm , Towel Rail CP 600mm , Plaster trowel with woodwen handle , Plumb bob iron , Galvanised Iron Pan Mortar Tasla 18 Gauge 16 inch dia minimum weight 1 Kg , Double end spanner for 16 mm dia nuts and bolts , Showel Square Nose 14 gauge TATA high carbon steel , Fish line , Hammer ball pine 1Kg , Electric Tile Cutting Machine with 5 Nos inter changeable blades , Measuring Tape 3 Mtr , GI Sheet cutter scissors , Transperant pipe 5 mm dia bore for water leveling , Multipurpose Non Slip Rubber Reusable Gloves for scrubbing cleaning brick work OG oblique Black , Full Body safety harness light weight , Gum boots for snow fall area , Screw driver , Portable drill machine with 06 Nos 8mm dia bits , Industrial Safety Helmet

Description: CATEGORY: Lignocaine HCl 2 percent without Adrenaline 30 ml Inj , Lidocaine or Lignocaine HCL 2 percent with Adrenaline 1 ratio 80000 2 ml cart , Collagen with medicaments pack of 1 gm , Syringe hypodermic cartridge type needle presterlised disposable pkt of 100 size 25 mm , Syringe hypodermic cartridge type needle 35 mm long presterlised disposable pkt of 100 , Cavity liner Calcium Hydroxide based self cure radiopaque two paste system tube of not less than 10 gm two component materials , Gel for root canal preparation containing water soluble lubricant 15 to 17 percent EDTA Tube of 3 to 5 gm for dental use only , Abrasive mounted diamond Bur FG round point 8 mm , Abrasive mounted diamond Bur FG cylindrical 1 point 2 mm , Abrasive mounted diamond Bur FG cylindrical 1 point 4 mm , Abrasive mounted diamond bur FG round 1 point 2 mm , Bur tungsten carbide Round 8 FG , Bur taper fissure cross cut tungsten carbide for straight hand piece 701 , Bur taper fissure cross cut tungsten carbide for straight hand piece 702 , Articulating paper , Shofu super snap mini kit CA finishing polishing disc , waldent protaper gold hand files pack of six files SX to F3 21mm length with corresponding GP and paperpoints complete kit , Set of six Rotary NiTi tapered files 25mm length with corresponding gutta percha points and paper points set complete kit , Dentsply endo Z tungsten carbide bur , Waldent lentulo spiral paste carrier 25 mm pack of 4 , RC Solve GP solvent liquid , Waldent 17 percent EDTA liquid solution 60ml , Calcium hydroxide with idoform root canal dressing and filling paste in syringe 2 to 4 gm , Gates Glidden drill sizes 1 to 6 length 29mm , 2 percent Chlorhexidine solution for root canal irrigation 100ml , Broach nerve canal barbed assorted size pkt of 12 , GIC Type 1 Powder and liq luting , GIC Type 2 Powder and liq Restorative , Root canal sealer paste for obturation containing two tubes oblique preloaded syringes , Disposable shoe covers for dispenser , Hand piece lubricant spray bott of 500 ml , GDC Mirror mouth top rhodium coated anti fog , Intraoral photographic mirror set of 3 with contraster , Patient bib plastic , Cheek retractor Plastic , Denture cleaner tablets pack of 30 to 40 tablets , Denture adhesive powder Bottle 10 to 15 Gm , Pre fabricated composite ready made veneers 0 point 3 mm to 0 point 5 mm assorted kit of 55065 veneers , Dental stone Pkt of 1 kg , Die Stone pkt of 1 kg , In Office Dental Bleaching kit complete , Heat cure Base acrylic resin powder pink shade bott of 450 gm and acrylic resin liquid bott of 227 point 3 ml , Heat cure Base acrylic resin powder clear shade bott of 450 gm and acrylic resin liquid bott of 227 point 3 ml , Self cure scrylic powder pink shade bottle of 110 gm with rapid repair liquid 110 ml , Self cure acrylic powder clear shade bottle of 110 gm with self cure acrylic liquid 110 ml , polishing Wheel wool large , Pumice powder superfine bag of 1 kg , Bur tungsten carbide HP Bur for acrylic resin cross cut length 52 mm diameter 6mm , Sticky Wax Box of 10 sticks , Modelling wax , Alginate impression material 300 to 500 gm Pkt , BIS Acrylic Resin Based provisional Kit for temporary crown work , Green Stick Pack of 10 , Shofu Crown preparation Kit containing 14 to 16 multilayered diamond burs , Base plate wax upper and lower pack of 12

Details: End Wall Assembly For Lhb Gs & Scn (amrit Bharat ) Coaches Note:-(1)in Dra Wings "mig Welding (131) Is To Be Read As Tig Welding (141)" As Per Design Letter No. Md4 6231 Dated 16.03.2024. (2)firm Shall Collect All Latest/final Drawings Before Manufactu Ring. There May Be Minor Modification In Design., As Per Drawing: 75415001 Alt. 'br1', Packing Instruction: 1. The Supplier Shall Pack The End Wall In A Suitably Designed Returnable Fixt Ure In Such A Way That End Wall Shall Not Get Scratched, Damaged, Twisted During Tra Nsportation, Storage And Lifting And To Avoid Scratches On Outer Surface. It Should B E Seperated By Suitable Environment Friendly Blocks To Avaoid Rubbing Of Two Endwall Surfaces . It Should Have Standard Clamping /fastening Mechanism So That It Can Be Ope Ned Easily. It Should Have Firm's Identification Mark. 2. First Returanable Fixture Along With End Wall Be Retained By Rcf & This Fixture Shall Be Exchanged In The Second Lot Su Pply And So On. At The End Of The Contact, The Firm Shall Collect The Remaining Returnable Packing Fixture From Rcf. 3. The Packing Fixture/frame To Be Fabricated Havi Ng Sufficient Strenght To Bear Approximate 2 Tonne Load In Static & Moving Condition O F Two Coach Sets Of End Wall. 4. The Fixture /frame/pallet Should Be Designed So That T He Packed End Wall Preferably Remain In Vertical Position To Minimize Surface Area. 5. It Should Also Be Suitable For Storage Of End Wallunder Open Sky. [ Warranty Period: 30 M Onths After The Date Of Delivery ] ]