Fabrication Tenders

Details: Repair, Maintenance, And Installation Of Plant/ Systems/equipments (version 2) - Icgs C-151; E 016 Sea Water Leakage Observed View Multiple Pin Holes From Ac System Pipe Line Pipe Line To Be Fabricated Renewed All Inway Job Include Removal Of Fitted .. , Repair, Maintenance, And Installation Of Plant/ Systems/equipments (version 2) - Icgs C-151; E 017 Black Water Leakage Observed Stp Pipe Line View Pipeline Material Deteriorated Perished Pipeline To Be Renewed Repaired As Per Sample Inway Jobs Includ.. , Repair, Maintenance, And Installation Of Plant/ Systems/equipments (version 2) - Icgs C-151; L 012 Navigation Communication Battery Cover For Protection From Rain Moisture On Flag Deck To Be Fabricated Mat Al Length 100 Cm Height 30cm; Service Provi.. , Repair, Maintenance, And Installation Of Plant/ Systems/equipments (version 2) - Icgs C-151; E 018 Stbd Gear Box Sea Water Cooling Line A Sea Water Leakage Observed From Pin Holes Of Stbd Gear Box Cooler Cooling Pipe Line Pipe Line To Be Chemically .. , Repair, Maintenance, And Installation Of Plant/ Systems/equipments (version 2) - Icgs C-151; L 013 Main Broadcast Not Producing Adequate Power Output From Speakers Suspect Amplifier Interface Module Malfunctioning Defect To Be Rectified And Proved Fo.. , Repair, Maintenance, And Installation Of Plant/ Systems/equipments (version 2) - Icgs C-151; H 023 Abnormal Sound And Vibration Observed Whilst Starting Ships Diving Air Compressor Diving Air Compressor To Be Overhauled Defect To Be Rectified And Pro.. , Repair, Maintenance, And Installation Of Plant/ Systems/equipments (version 2) - Icgs C-151; L 014 Wire-mess Fencing For Main Engine And Das Batteries Deteriorated Same To Be Repaired Mat Al Length 2m Height 1m; Service Provider

Details: Description:- Supplying, Installation, Testing And Commissioning Of Electric Driven Main Fire Pump compatible To Deliver 1620 Lpm At A Head Of 88 Mtr Suitable For Automatic Operation And Consisting Of following, Complete In All Respects, As Required : A. Horizontal Type, Multistage, Centrifugal, Split Casing pump Of Cast Iron Body & Bronze Impeller With Stainless Steel Shaft, Mechanical Seal Conforming To Is 1520. B. Suitable Hp Squirrel Cage Induction Motor, Tefc, Synchronous Speed 1500 Rpm, Suitable For operation On 415 Volts, 3 Phase 50 Hz, Ac Supply With Ip 55 Protection For Enclosure, Horizontal Foot mounted Type With Class-'f' Insulation, Conforming To Is-325. C. M.s. Fabricated Common Base Plate, coupling, Coupling Guard, Foundation Bolts Etc. As Required. D. Suitable Cement Concrete Foundation duly Plastered With Anti Vibration Pads.

Details: Description:- Manufacturing And Supply Of Alumino Thermic Welding Portions Of 52kg/60 Kg/60ei- r260 As Approved By Rdso For Welding Of Rails 52kg/60kg/60ei-r260 Kg For 25mm Gap By The process Of At Welding Along With Complete Accessories Confirming To The Specification Laid Down In indian Railway Standard Specification No.irst-19-2020 Up To Date Correction Slips With Single Shot crucible Fitted With Automatic Tapping Thimble, 3 Pieces Pre Fabricated Mould (zircon Washed) manually Pressed Using Compressed Air Petrol/lpg Pre Heating For Execution Of Welding Of Rail Joint as Directed By The Engineer In Charge At Site. Note: 1. The Accessories Along With Welding Portion shall Be Supplied As Per Annexure-i Of The Irussor - 2021. 2. Rate Is Inclusive Of Transportation Of above To Sse/p.way Stores.

Details: Supply Of Material And Execution Of Indoor & Outdoor Work For Provision Of Electronic Interlocking-msdac Based Automatic Block Signalling System Between Luni Jn And Bishangarh Station In Connection With Doubling Of Ln-smr-bldi Section Of Jodhpur Division Of North Western Railway. The Work Involves Provision Of New Electronic Interlocking At Satlana, Dudia, Dundara, Ajit, Bamsin,rakhi, Mokalsar, Balwara,bishangarh Stations And Samdari Jn. Along With Fifteen Numbers Of Auto Signalling Huts And Modification In Existing Medha Make Ei At Luni Jn. Provision Of Msdac Along With Associated Works Like Trenching & Laying Of Signalling And Telecom Cables In Pre-fabricated Ducts/dwc/gi Pipes, Supply-installation Of Point Machines, Apparatus Cases, Signals, Track Circuit Equipment, Earthing Material, Data Loggers, Eld, Fuse Alarms, Fire Alarms, Passenger Amenity Telecom Items Etc

Details: Description:- Css-1: Supply, Install, Test And Commission Of Css Substation Enclosure Non Walk- In type Fabricated By Gi Steel With Accessories (1) 11kv, 630a, 21ka/3sec. Ring Main Unit Consisting Of 1no. Incoming Fixed Vcb (manually Operated) & 2nos. Outgoings Fixed Vcb/sf-6 (manually Charging & closing) (2) 250kva, 11/0.415kv Crt Dry Type Transformer (3) On Load Changeover Switch Capacity 4- pole, 415v, 630a (4) Lt Panel Shall Consist Of 1no. Incoming Of 400a, 4pole, Mccb & Outgoings Of 4 nos. 4pole 100a Mccb And 1 Nos. 4pole, 250a Mccb (5) Apfc Panel Of 70kvar. Note: Foundation Of css Is Taken Separately. As Per Specification

Details: Description:- Manufacturing And Supply Of Alumino Thermic Welding Portions Of 52kg/60 Kg/60ei- r260 As Approved By Rdso For Welding Of Rails 52kg/60kg/60ei-r260 Kg For 25mm Gap By The process Of At Welding Along With Complete Accessories Confirming To The Specification Laid Down In indian Railway Standard Specification No.irst-19-2020 Up To Date Correction Slips With Single Shot cruciblefittedwith Automatic Tapping Thimble, 3 Pieces Pre Fabricated Mould (zircon Washed) manually Pressed Using Compressed Air Petrol/lpg Pre Heating For Execution Of Welding Of Rail Joint as Directed By The Engineer In Charge At Site. Note: 1. The Accessories Along With Welding Portion shall Be Supplied As Per Annexure-i Of The Irussor - 2021. 2. Rate Is Inclusive Of Transportation Of above To Sse/p.way Stores. For 60kg 90 Uts Rails

Description: 12261ms24i, 98050011, Quantity- 17.320 Mts. Scrap Condemned Unserviceable Ms Bed Plates, Water Tanks And Water Tank Cut Pieces, Ms Path Plates, Foot Path Plates, Sheets, Bin Cut Parts, Rack And Roller Path, Air Tank Cover Parts, Striker Casting Wear Plates, Sliding Doors, Swing Doors, Flap Doors, Ms Chequered Plates, Expansion Tank Parts, Ms Plates, Plate Cuttings, Wagon Doors, Dsl Engine Long Hood, Dummy Bogie Cut Parts, Cast Iron Surface Plates And Base Plates, Axle Counter Ms Frames, Baking Oven Cut Pieces, Ocb Duct, Welding Machine Outer Body, Inverter Empty Body, Tap Changer Ms Spares And Empty Body, Manipulator, Shaping Machine Ms Body, Ms Gates, Collapsible Gates, Base Plate, Short Hood Cabin Cut Parts, Tables, Racks, Lavatory Chute Brackets, Ms Travelling Base, Ms Danger Boards, Radiator Ms Spares, Ms Die Blocks, Ms Body Of Radiator Fan Motor, Capacitor Ms Body, Auxiliary Transformer Ms Empty Body, Ducts, Dust Bin Stand, Ht Load Brake Switch Body, Ms Transformer Body, Ventilator Motor Frames, Transformer Top Plate, Air Receiver, Storage Box Cut Parts, Coach Body Parts, Dust Bins, Lockers, Cattle Guard, Incinerator Chimney Parts, Incinerator Oven, Incinerator Cut Parts, Boxes, Wagon Doors Cut Pieces, Wagon Bfr End Plates And Cut Pieces, Ms Fuel Tanks [fire Prone], Boiler Tank Cut Pieces, Angles, Girder, Sheets Cut Pieces, Portable Stands, Channels ,fabricated Structures And Other Corroded Heavy Melting Scrap Of Different Thickness Of Sorts And Sizes, With Or Without Attachments. Note- 1. Gas Cutting Permitted For The Purpose Of Loading Only. 2. It Is The Responsibility Of The Purchaser To Ensure That Fuel Tanks To Be Filled With Water And Cleaned Thoroughly Free From Flammable Substances Before Cutting To Avoid Explosion Or Any Casualties. 3. Private Crane Permitted For Loading. Special Note- Gas Cutting For Fuel Tank Should Be Done In Open Area [cutting Must Be Kept Clear And Free Of Flammables] And Away From Bins [free From Recognized Hazards That Are Causing Or Are Likely To Cause Serious Harm] And Should Follow Fire-prevention And Fire-protection Measures. Location- [bin No- 261, Left Side Of Road No- 2]. Hsn Code- 72044900. Gst- 18 Percent. Note- Delivery On Actual Weighment Basis Only. Special Note: Overload Of The Carrying Capacity Of The Vehicle Will Not Be Permitted At The Time Of Taking Delivery As Per Mv Act 1988

Description: CATEGORY: Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - As per tender document; Sl No 1 Earth excavation by mechanical means Hydraulic excavator or manual means for foundation substructures plinth beam cess pits trenches all.. , Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - As per tender document; Sl No 2 Providing and laying plain cement concrete 1 is to 2 is to 4 using 20mm maximum size graded aggregates including mechanical mixing transp.. , Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - As per tender document; Sl No 3 Providing and laying Reinforced cement concrete M30 using 20mm maximum size graded aggregates including mechanical mixing transporting et.. , Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - As per tender document; Sl No 4 Providing straightening decoiling wherever necessary bending cutting binding and fixing in position steel reinforcement TMT bars of Fe 50.. , Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - As per tender document; Sl No 5 Supplying fabricating erecting and fixing in position at all levels centering and shuttering to correct line and levels including strutti.. , Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - As per tender document; Sl No 6 Providing and constructing 200mm thick precast concrete solid blocks masonry wall in cement mortar; As per tender document , Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - As per tender document; Sl No 7 Leveling the area to the required gradient in all types of soil including cutting the mounds wherever required for filling the low lying .. , Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - As per tender document; Sl No 8 Providing plastering to the external surfaces of brickwork concrete at all elevations in cement mortar; As per tender document , Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - As per tender document; Sl No 9 Dismantling of RCC works at all levels by manually by mechanical means including Cutting and stacking of steel reinforcement bars and dis.. , Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - As per tender document; Sl No 10 Demolishing Stone rubble masonry In cement mortar at all levels by manually by mechanical means carefully without damaging adjacent stru.. , Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - As per tender document; Sl No 11 Dismantling brick work In cement mortar at all levels by manually by mechanical means carefully without damaging adjacent structures inc..

Description: CATEGORY: Manufacturing and supply of Structural items of FOL shed of Size 4200 X 3200 X 3000 mm using mild Steel structure , Side walls stores using 0.60mm of PPGL sheets , Roofing Sheets as per TS , MS Doors as per TS , Self screw for fixing of roof size as reqd on site. , Star Screw full thread 25 mm ISI Mark , Nuts and Bolts 8mm dia 60mm to 120mm long with washer , GI J Hook 8mm with 1 nut 2 bitumin washer and limped washer , Rivit of 500 Nos , LED Tube light complete set 18W 4 feet long , Switch Piano flush type , PVC switch board 6 inch x4 inch , PVC casing and capping of size 25 mm , Wire Single Core Copper Conductor 2.5 Sqmm , MCB 10 Amp SP , Armoured Cable10 sqmm 4 Core copper , LT Panel Board Factory Fabricated , Shelves for storage 2100 mm x 450 mm x 750mm , Insulation tape 45 Mtr with ISI mark , Change over switch 100 Amp 04 pole , Ceiling Rose. , Service wire 10 sq mm flat 2 core aluminium connector cable , GI Wire 14SWG , Fire Extinguisher 6 Kgs ABC dry powder stored pressure type , Paint for touch up Green , Paint for touch up Black , Distemper , Plywood as per TS , Scantling teak wood size 140 to 160 inch , FRP Storage Tank Conforming to UL 1316 of Capacity 5KL with standard accessories , Wire Single Core Copper Conductor 2.5 Sq mm , PVC Pipe 100 MM Dia , GI Elbow 20mm , GI Gate valve connector , GI Socket 20mm with thread , GI Union 20mm , PVC flexible hose pipe 20 mm dia , Lightening Conductor made of copper Tube with five copper prongs of length 15 cm with complete stores , Industrial Fuel Transfer Pump Automation Grade , Provision of fire extinguisher 50 Kgs ABC Dry powder stored pressure type trolley mounted. , HDPE Tarpaulin of Size 30 feet x 30 feet , Ordinary Portland Cement grade 43 , Coarse Sand , Stone Aggregate 20 MM , Stone Aggregate 40 to 60 mm , 10 mm TMT Bar , RR Masionary stone , Connected stores as per final design

Description: 12229ms25c, 98050011, Quantity- 17.940 Mts. Scrap Condemned Unserviceable Ms Bed Plates, Water Tanks And Water Tank Cut Pieces, Ms Path Plates, Foot Path Plates, Sheets, Bin Cut Parts, Rack And Roller Path, Air Tank Cover Parts, Striker Casting Wear Plates, Sliding Doors, Swing Doors, Flap Doors, Ms Chequered Plates, Expansion Tank Parts, Ms Plates, Plate Cuttings, Wagon Doors, Dsl Engine Long Hood, Dummy Bogie Cut Parts, Cast Iron Surface Plates And Base Plates, Axle Counter Ms Frames, Baking Oven Cut Pieces, Ocb Duct, Welding Machine Outer Body, Inverter Empty Body, Tap Changer Ms Spares And Empty Body, Manipulator, Shaping Machine Ms Body, Ms Gates, Collapsible Gates, Base Plate, Short Hood Cabin Cut Parts, Tables, Racks, Lavatory Chute Brackets, Ms Travelling Base, Ms Danger Boards, Radiator Ms Spares, Ms Die Blocks, Ms Body Of Radiator Fan Motor, Capacitor Ms Body, Auxiliary Transformer Ms Empty Body, Ducts, Dust Bin Stand, Ht Load Brake Switch Body, Ms Transformer Body, Ventilator Motor Frames, Transformer Top Plate, Air Receiver, Storage Box Cut Parts, Coach Body Parts, Dust Bins, Lockers, Cattle Guard, Incinerator Chimney Parts, Incinerator Oven, Incinerator Cut Parts, Boxes, Wagon Doors Cut Pieces, Wagon Bfr End Plates And Cut Pieces, Ms Fuel Tanks [fire Prone], Boiler Tank Cut Pieces, Angles, Girder, Sheets Cut Pieces, Portable Stands, Channels ,fabricated Structures And Other Corroded Heavy Melting Scrap Of Different Thickness Of Sorts And Sizes, With Or Without Attachments. Note- 1. Gas Cutting Permitted For The Purpose Of Loading Only. 2. It Is The Responsibility Of The Purchaser To Ensure That Fuel Tanks To Be Filled With Water And Cleaned Thoroughly Free From Flammable Substances Before Cutting To Avoid Explosion Or Any Casualties. 3. Private Crane Permitted For Loading. Special Note- Gas Cutting For Fuel Tank Should Be Done In Open Area [cutting Must Be Kept Clear And Free Of Flammables] And Away From Bins [free From Recognized Hazards That Are Causing Or Are Likely To Cause Serious Harm] And Should Follow Fire-prevention And Fire-protection Measures. Location- [bin No- 229, Right Side Of Road No- 2]. Hsn Code- 72044900. Gst- 18 Percent. Note- Delivery On Actual Weighment Basis Only. Special Note: Overload Of The Carrying Capacity Of The Vehicle Will Not Be Permitted At The Time Of Taking Delivery