Fabrication Tenders

Description: CATEGORY: Aluminium_LM_6_Fan Blades_10Nos_set or 8 Nos_Set_Part No_8002_AF_80 , Fan Pulley_Part No_8004_MMM VENTILATION FAN MODEL AF_80 , Jack Shaft_Part No_8005_MMM VENTILATION FAN MODEL AF_80 , Drive Pack Belt Guard_Part No_8012_MMM VENTILATION FAN MODEL AF_80 , Drive Pack belt_Part No_8017_MMM VENTILATION FAN MODEL AF_80 , Coupling_Part No_8020_MMM VENTILATION FAN MODEL AF_80 , Aluminium_LM_6_ Fan Hub_Part No_8001_AL_MMM VENTILATION FAN MODEL AF_80 , Aluminium_LM_6_Fab blades with studs_Nuts_washer_8Nos_Set_Part_No_65002AF_65 , Fan Shaft with 2 Nos Plummer Block with 2 Nos Bearing_Part_No_65003AF_65 , Fan Pulley_Part_No_65004MMM VENTILATION FAN MODEL AF_65 , Motor Pulley_Part_No_65005_MMM VENTILATION FAN MODEL AF_65 , Drive Pack belt_Part_No_65010_MMM VENTILATION FAN MODEL AF_65 , M.S. Fabricated Fan Hub_Part_No_65001_MMM VENTILATION FAN MODEL AF_65 , Coupling_Part_No_65012_MMM VENTILATION FAN MODEL AF_65 , Coupling_Part_No_G10009_MMM VENTILATION FAN MODEL AF_100_G , Jack shaft pully_Part_No_G10007_MMM VENTILATION FAN MODEL AF_100_G , Drive Pack Belt_Part No_G10011_MMM VENTILATION FAN MODEL AF_100_G

Description: CATEGORY: Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - ICGS C-146; L 53 Ship wardroom refrigerator not getting enough cooled and abnormal noise observed from compressor Defect to be rectified and proved for satisfactory oper.. , Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - ICGS C-146; L 54 02 nos side clear view screen motor observed abnormal noise and motor showing zero insulation Make Ms Samyang marine 1 Phase 50 Hz motor to be overhaule.. , Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - ICGS C-146; L 55 Waterjet compartment ventilation motor showing low insulation suspect motor winding to worn-out motor to be overhauled and proved for satisfactory opera.. , Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - ICGS C-146; L 56 01 nos galley hotplate not getting enough heated showing zero insulation Abnormal noise observe from control panel and breaker frequently getting trip D.. , Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - ICGS C-146; L 57 03 in nos window wiper not working window wiper motor showing low insulation Window wiper motor to be rewinded and wiper blade to be renewed as per samp.. , Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - ICGS C-146; H 087 03 in numbers stanchions of STBD side at midship bent from centre deteriorated to be renewed fabricated as per sample Inway job includes cutting and we.. , Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - ICGS C-146; E 048 Gear teeth of OBM throttle handle broken resulting in inability to increase RPM and OBM fixing handle corroded deteriorated Same to be renewed as per s..

Description: CATEGORY: Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - ICGS C-424; L 53 Ship wardroom refrigerator not getting enough cooled and abnormal noise observed from compressor Defect to be rectified and proved for satisfactory ope.. , Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - ICGS C-424; L 54 02 nos side clear view screen motor observed abnormal noise and motor showing zero insulation Make Ms Samyang marine 1 Phase 50 Hz motor to be overhaule.. , Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - ICGS C-424; L 55 Waterjet compartment ventilation motor showing low insulation suspect motor winding to worn-out motor to be overhauled and proved for satisfactory opera.. , Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - ICGS C-424; L 56 01 nos galley hotplate not getting enough heated showing zero insulation Abnormal noise observe from control panel and breaker frequently getting trip D.. , Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - ICGS C-424; L 57 03 in nos window wiper not working window wiper motor showing low insulation Window wiper motor to be rewinded and wiper blade to be renewed as per sam.. , Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - ICGS C-424; H 087 03 in numbers stanchions of STBD side at midship bent from centre deteriorated to be renewed fabricated as per sample Inway job includes cutting and we.. , Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - ICGS C-424; E 048 Gear teeth of OBM throttle handle broken resulting in inability to increase RPM and OBM fixing handle corroded deteriorated Same to be renewed as per s..

Description: CATEGORY: Aluminium_LM_6_Fan Blades_10Nos_set or 8 Nos_Set_Part No_8002_AF_80 , Fan Pulley_Part No_8004_MMM VENTILATION FAN MODEL AF_80 , Jack Shaft_Part No_8005_MMM VENTILATION FAN MODEL AF_80 , Drive Pack Belt Guard_Part No_8012_MMM VENTILATION FAN MODEL AF_80 , Drive Pack belt_Part No_8017_MMM VENTILATION FAN MODEL AF_80 , Coupling_Part No_8020_MMM VENTILATION FAN MODEL AF_80 , Aluminium_LM_6_ Fan Hub_Part No_8001_AL_MMM VENTILATION FAN MODEL AF_80 , Aluminium_LM_6_Fab blades with studs_Nuts_washer_8Nos_Set_Part_No_65002AF_65 , Fan Shaft with 2 Nos Plummer Block with 2 Nos Bearing_Part_No_65003AF_65 , Fan Pulley_Part_No_MMM VENTILATION FAN MODEL AF_65 , Motor Pulley_Part_No_65005_MMM VENTILATION FAN MODEL AF_65 , Drive Pack belt_Part_No_65010_MMM VENTILATION FAN MODEL AF_65 , M.S. Fabricated Fan Hub_Part_No_65001_MMM VENTILATION FAN MODEL AF_65 , Coupling_Part_No_65012_MMM VENTILATION FAN MODEL AF_65 , Coupling_Part_No_G10009_MMM VENTILATION FAN MODEL AF_100_G , Jack shaft pully_Part_No_G10007_MMM VENTILATION FAN MODEL AF_100_G , Drive Pack Belt_Part No_G10011_MMM VENTILATION FAN MODEL AF_100_G

Description: CATEGORY: DE Spanner 12x13 , Adjustable Spanner8 , Cutting Plier , Tool Kit Bag Canvas , Screw Driver 12 300mm , Screw Driver 8 , First Aid Kit , Ring Spanner 10 x 11 , Ring Spanner 12 x 13 , Ring Spanner 18 x 19 , Phil Screw Driver 100mm long 6 Dia , Tube Hose Pump , Assy Wheel Nut M 20 x 2.5 , Screw Driver , Rubber Packing , Single Filament FHL 12V , Bush Engine Cleaning , Rubber Hose Radiator to Thermostate , Rubber Hose , Scabbard Dah Mk-3 , Bock Wooden for Jack , Chock Large , Tin Rectangular 5 Ltrs , MS Fabricated Parking Chock , Push Tap SS , Assy Pacer block Complete , Tyre Lever T L6 , Hand Lamp with Cable of lenth 10mm , Adjusting Screw , Fog Light 12V , Bulb F 15 W for Rear Indicator , Bulb 12V for Front Indicator , Block Jack , Box Tin Lamp Filament , Bulb 12 3 21 6 for Stop Lamp , Camp for Sheller Valcanizer 5 Minutes , Funnel Oil 152 mm Oval , Inserter and remover tyre valve , Philps Head Screwdriver 100mm Longtip , DE Spanner 5 8 x 9 16 SAE , DE Spanner 14 x 15mm , Tool Box , Bulb Turn Signal 12V and 21W , Jack with Handle 12Ton , Ruuber Hose Radiator to top cover water , PVC Hose Nipple , Sump Packing , Rubber Packing Main Hole Cover , DE Spanner 11 x 13 , Chocks Stoware Vehicle Timber , Inspection Lamp with 10 Mrs Long Table

Description: Scrap Ferrous Melting Consisting Of Coach - Cutting Parts, Window, Doors, Seat Bearth Frame, Shutters,silent Block, Wire & Wire Rope,m.s.& G.i.sheets ( Plane Or Corrugatted),m.s.& G.i.pipes Fabricated Structure, Follen Rod,pipe Fittings, Anchore Link,m.s. Cst-9,bmbc Cover,expended Metal Switch Boxes,hand Barrow,dust Cart,dust Shield Spring Gear Casing,brake Beam, Brake Shoe Head, Brake Shoe & Side Frame Key, Shuckle Stone, Lower Spring Seat, Protective Tube,pin, Nut, Bolt, Washer, Locking Plate,bond Strip, Rachet, Tirfor,pipe & Tie Bar Fencing, Pull Lift, Eq. Stay Shock Absorver, Slack Adjuster, Damper,gate, Helical Spring Up To 03 Coil,bucket, Battery Box, Fire Extinguisher,pan,rake Ballast, Wire Clawn, Brocken Helical Spring Up To Single Coil, Water Tank,dummy / Box, Empty Electric Panel, Foot Rest Plate, Foot Step,fan Blower, Empty Drums Cut Up & Damage Of Sorts,hooks With N.f., Nos Plate, Cut Pcs. Of Mast, Cut Pcs Of Location Box,pandrol Clip,crusible & Its Stand, Different Tipes Of Lid,& Other Various Released Melting Scrap From Loco, Carriage, Sig., Electric, Trd, Tmc, Of Sorts & Sizes With Steel ,c.i.,& Neg.n.f. Attachment If Any. Note- 1- L.b.p. 2- Cutting Allowed For Loading Purpose. 3- Digging Allowed If Required. 4- Other Than Melting Scrap If Found During Cutting ,loading & Digging Will Be Seperated & Not Delivered To Purchaser. Location - Lying At L/n-11 & Its Both Sides From Road To Tree Nos G-8 In Plot- G

Details: Running Contract For 10125 Mm Over-riding Curved Switches For 60 Kg 1 In 12 T/out As Per Rdso Drg .no. T-4219, Alt-9 And Conforming To Irs Specification No.t-10-2023, Fabricated Switches Should Be Complete Along With Parts/fittings As Per Rdso Drawing No. T-4218 (alt-8) &t-4219 (alt-9) , Parts/fittings List Attached As Annexure- C (latest Alteration To Rdso Drawing And Latest Alteration/revision/corrigendum/amendment To Irs Specification/technical Specification As Applicable )

Details: Description:- Supply And Installation Of Pre Fabricated Modular Operation Theatre With 50mm Thick ss Puff Panel Of 0.6mm Ss 304 Sheet On Both Sides. Filling Of All Joints And Cavities With Epoxy Filler and Sanded Flush To Provide A Seamless Finish. Applied With Minimum Three Coats Of Antibacterial & antifungal Paint, Wall Glaze Or Equivalent To A Minimum Dry Film Thickness Of 300 Microns Having overlap Floor Covering, Ceiling System And Door Frames By 25mm To Provide A Continuous Sealed surface.

Details: CATEGORY: customised executive high cushioned seating arrangement , customised executive works station with ERU unit and required accessories storage , wooden sculptured cap stand , leatherite cushioned visitor seating arrangement with ss base , Fabricated wardrobe with enclose and locking arrangement , customised display with glass shelves and transparent tuffened glass enclosure , devider with tuffened glass , weather proof customised roof with step design and aluminium fixture , tuffened glass enclosure with acidic works and required like , strechered weather proof coat for interior with fine emulsion finished

Details: Description:- Supply Installation Testing & Commissioning Of Fabricated Container To Be Delivered To site To Suite The Complete Pump Room Facility. It Is Capable To Accommodate Atleast Two Sets Pumps, (1 Set Means Pump Having Capacity 40 Hp Including 3 Nos Of Motor) Electrical Control Panels And Allied fittings With Forced Air Circulating By Exhaust Fans & Electrical Fittings . Size Of Container Required Is 8 mtr X 3.5 Mtr X 3 Mtrs. All Electrical Points, Wiring And Switch Board Will Also Be Fitted By The contractor.