Fabrication Tenders

Description: 98090800: Cond. & U/s. Dinged/damaged Ms/gi Scrap Of 200/210 Oil Barrels/paint Drums 20/25 Liters, Tar Barrels, Crushed Barrels With Or Without Cap/lid/bunks And With Or Without Sediments And Residues , Ms/gi Sheets, Ms Strip, Punched Strips, Ms Tube, Fan Guard, Half Barrel, Loc Box, Lamp Cover, Battrey Box, Ct Box, Ups Body, Panel Board, Relay Rack, Fire Bucket, Level Crosing Gate Parts, Ms Trolly, Ms Rusted Parts, Boiler Tube, Ladder, Pipe, Switch Box Of Various Type, Ms Rope, Ms Electrical Parts, Various Type Of Tube Light Fitting, Ms Foot Path , Ms Electrical Borad, Signal Lamp, Windows, Rusted Door, Gate,coach Guide Line Board, Name Board, Drum Bolts, Nuts, Water Tight Fittings, Sign Board , Display Board,led Fittings, Rusted Universal Axle Counter Body, Transformer Body,fencing, Cycle Parts, Filter, Corroded Pipes, Fabricated Gate, Collapsible Gate,packing Strips, Reinforcement Rod, Mesh, Grill, Bent Sheets, Galvaleum Sheets, Roofing Sheets,rolling Shutters, Ms Box, Automobile Spares, Disk, Oilfilter, Mesh, Nails, End Rods, Shovel, Power Arm , Clamps, And Such Other Similar Scrap As Is Where Is Condition With Or Without Minor Non Ferrous Attachment. Note :(1)if Any Nonferrous/stainless Steel Materials Found In Loose, Should Be Returned To The Custodian (2) Delivery Should Be Made Location Wise. Purchaser Should Be Permitted To Take The Materials From The Next Location After Clearing The Materials Of One Location. Location:bin No-w 41 &b7 Of Scrap Yard/ssd/ptj.

Description: Fabricated Ms Scrap Released From Fob Consisting Of Materials Such As Angles, Channels, Ismc, Hollow Section, Plates, Ms Rods, Ms Flat, Welded Rail Parts Of Different Sizes Released From Platform Shelter - Total Qty - 9.284 Mt As Is Where Is Basis, [condemned, Unserviceable, Released], Custodian : Sr. Section Engineer/works/kollam., S.1539 No.593249 Dtd.09.09.2024, Location : Kept At Alleppey Station Platform No.1 Kyj End Near Trd Office. Note- 1] Delivery To Be Made On Actual Weighment Basis., 2] Segregation Of The Material Is Strictly Not Permitted., 3] Concrete Parts Found Attached To The Lot Items Shall Be Permitted For Breaking, If Necessary., Special Conditions : 1) Jurisdiction- The Courts In Chennai Alone Shall Have Exclusive Jurisdiction In The Matters/disputes Arising Out Of The Contract/ Arbitration / Conciliation Proceedings And The Place Of Arbitration/ Conciliation, If Any, Shall Be In Chennai Only. 2) Forfeiture Of Bsv Payment Along With Emd.-in Southern Railway Bsv Partly Paid Along With Emd Will Be Forfeited, If Full Payment Is Not Received In Stipulated Time, With Interest If Any Applicable. 3) Part Delivery-part Delivery Is Not Permitted Against Part Payment On Southern Railway, Nfs/side Assets : 1] Cst9 Sleeper Plate (1 No.) Found Near The Lot Is Taken As Nfs., 2]. Any Nfs Or Non Ferrous Items Found During The Delivery To Be Handed Over To Custodian., 3]. Any Fresh Arising After Lot Formation To Be Treated As Nfs., [pl No. 98057054, Hsn Code : 720429, Gst : 18 % On Rcm], Item : Actual Weighment Ms. [image Attached].

Description: Mixed Scrap : Actual Lot No. 03122501 0522. Pl No.98050047 (15) (hsn Code 72044900-gst18% On Fcm Basis) Scrap Of Cond. & Unserviceable Mixed Scrap Of Ms, Cs, Ci, Gi, Ss Contains Pipes End Body Pcs. Horizontal Levers Hand Brake Wheels Angle And Channel Pcs, Rod Pcs Stands Valves Levers Bolts And Nuts Rivets Washers Pins Foot Steps Cut Bits Side Barer Housings Pipe Pcs Straps Liners Sheets Pipe Pcs Pins Throwers Locks Races Collars Axle Box Covers, Air Brake Pipes, Guard Seats, Ms End Body Pcs, Ms Sheets, Ms Cut Bits, Ms Rod Pcs, Sab Parts, Gi Wire, Ms Ladders, Ms Channels, Door Hangers, Tool Box, Ms Meshes, Bp Fp Hose Pipes, Knuckles, Crushed Paint Drums, Grease Seals, Yoke Support Plates, Yoke Pins, Sheet Strips, Ms Pipes And Pcs, Rubber Pads, Chairs, Roof Sheets, Grease Drum, Auxiliary Reservoirs, Cone Bearing, Hoop Iron. Wedges Hyd. Hoses Fabricating Scrap And Other Misc Items Of Wagons Sorts & Sizes Full Or Broken With Or Without Attachments Location: Road No.3 (single Cut Permitted For Loading Purpose Only) (note: 1. If Any Ss/ Corten Steel & Non-ferrous Items Found During Loading / Delivery Shall Be Return To The Railways By The Purchaser 2. In Case Of Clubbed Lots, Purchaser Has To Clear The Lots In The Sequence As Mentioned In The Lot Description And No Deviation Is Accepted. 3. No Picking And Choosing Of Material Is Permitted While Taking Delivery )

Description: CATEGORY: Transportation of dismantled 3No. to 5 No. AC units Upto 20 KM with all accessories incl. hiring of vehicle, manpower etc , Transportation of dismantled 2 No. AC units From 21 KM to 50 KM with all accessories incl. hiring of vehicle, manpower etc , Transportation of dismantled 3No. to 5 No. AC units From 21 KM to 50 KM with all accessories incl. hiring of vehicle, manpower etc , Transportation of dismantled 2 No. AC units From 51 KM to 100 KM with all accessories incl. hiring of vehicle, manpower etc , Transportation of dismantled 3No. to 5 No. AC units From 51 KM to 100 KM with all accessories incl. hiring of vehicle, manpower etc , Transportation of dismantled 3No. to 5 No. AC units From 100 KM Upto 200 KM with all accessories incl. hiring of vehicle, manpower etc , ITC of 1.5 or 2TR Window AC unit with properly finshing and minor civil work , ITC of wall mounting type 1.5 or 2TR Split AC unit with properly finishing and minor civil work , ITC of 2x1.5 TR High Sensible AC unit with properly finishing and minor civil work , S and F of 1 by 4 inch Copper refrigeration pipe , S and F of 3 by 8 inch Copper refrigeration pipe , S and F of 1 by 2 inch Copper refrigeration pipe , S and F of 5 by 8 inch Copper refrigeration pipe , P and W of expanded polyethylene foam tube insulation for 1 by 4 inch Copper refrigeration pipe , P and W of expanded polyethylene foam tube insulation for 3 by 8 inch Copper refrigeration pipe , P and W of expanded polyethylene foam tube insulation for 1 by 2 inch Copper refrigeration pipe , P and W of expanded polyethylene foam tube insulation for 5 by 8 inch Copper refrigeration pipe , S and F of prefabricated powder coated heavy duty iron stand having projection arm minimum 600 MM , S and fabrication of M.S. frame made out of various M.S. Sections incl. hardwares finishing, painting, minor civil work etc , P and F of 12mm thick prelaminated particle board with decorative lamination on both side flat pressed 3 layer or graded wood particle board , S and L of 4 X 1.5 Sq mm copper conductor unarmoured cable of 1.1 KV grade ISI mark , S and L of 3 X 2.5 Sq mm copper conductor unarmoured cable of 1.1 KV grade ISI mark , S and F of 20 mm Dia heavy gauge rigid UPVC pipe of ISI mark , S and F of 25 mm Dia heavy gauge rigid UPVC pipe of ISI mark , S and L of 3 X 2.5 Sq mm copper conductor armoured cable of 1.1 KV grade ISI mark , S and M end termination with brass compression gland for 3 X 2.5 Sq mm size of PVC insulated PVC sheathed or XLPE CU condr armd cable , S and F of 2 way SPN MCB DB , S and F of 5A to 32A 10KA C curve SP MCB , S and F of 5A to 32A 10KA C curve SPN MCB , S and F microprocessor based energy saver unit for controlling the operation of 2 A.C. unit having safety protection, disply, auto, manual mode , Repairing of faulty AC controller of AC unit , Sand F of electronic AC voltage stabilizer suitable for operation on 130Volt to 290 Volt for 1.5TR AC unit , Installation of SPN or TPN MCB DB , Fixing of SP or SPN or DP or TP or TPN or FP MCB , Fixing of outdoor condensor Stand , Fixing of both size of refregerent piping but Without heatlone tube , Laying of 2 or 3 or 4 core copper conductor armoured or unrmoured cable up to size 4 sq mm. , Fixing of Cyclic timer , Fixing of 20mm or 25mm dia drain water PVC pipe.

Description: CATEGORY: Aluminium_LM_6_Fan Blades_10Nos_set or 8 Nos_Set_Part No_8002_AF_80 , Fan Pulley_Part No_8004_MMM VENTILATION FAN MODEL AF_80 , Jack Shaft_Part No_8005_MMM VENTILATION FAN MODEL AF_80 , Drive Pack Belt Guard_Part No_8012_MMM VENTILATION FAN MODEL AF_80 , Drive Pack belt_Part No_8017_MMM VENTILATION FAN MODEL AF_80 , Coupling_Part No_8020_MMM VENTILATION FAN MODEL AF_80 , Aluminium_LM_6_ Fan Hub_Part No_8001_AL_MMM VENTILATION FAN MODEL AF_80 , Aluminium_LM_6_Fab blades with studs_Nuts_washer_8Nos_Set_Part_No_65002AF_65 , Fan Shaft with 2 Nos Plummer Block with 2 Nos Bearing_Part_No_65003AF_65 , Fan Pulley_Part_No_65004MMM VENTILATION FAN MODEL AF_65 , Motor Pulley_Part_No_65005_MMM VENTILATION FAN MODEL AF_65 , Drive Pack belt_Part_No_65010_MMM VENTILATION FAN MODEL AF_65 , M.S. Fabricated Fan Hub_Part_No_65001_MMM VENTILATION FAN MODEL AF_65 , Coupling_Part_No_65012_MMM VENTILATION FAN MODEL AF_65 , Coupling_Part_No_G10009_MMM VENTILATION FAN MODEL AF_100_G , Jack shaft pully_Part_No_G10007_MMM VENTILATION FAN MODEL AF_100_G , Drive Pack Belt_Part No_G10011_MMM VENTILATION FAN MODEL AF_100_G

Details: Description:- Supplying, Fabricating And Fixing Access Ladders, Inspection Platforms, Trolley Refuges etc.,onbridgeswithstructuralsteelconformingtois:2062includingwelding/bolting,priming painting With One Coat Of Ready Mixed Paint Of Zinc Chromate (is:104) With Dft Of 25-30 Microns followed By One Coat Of Zinc Chrome Red Oxide (is:2074) With Dft Of 25 Microns With All Material, labour, T&p As A Complete Job. Note: Painting Shall Be Paid Separately Under Relevant Item.

Details: Description:- Supplying, Fabricating And Fixing Access Ladders, Inspection Platforms, Trolley Refuges etc., On Bridges With Structural Steel Conforming To Is:2062 Including Welding / Bolting, Priming painting With One Coat Of Ready Mixed Paint Of Zinc Chromate (is:104) With Dft Of 25-30 Microns followed By One Coat Of Zinc Chrome Red Oxide (is:2074) With Dft Of 25 Microns With All Material, labour, T&p As A Complete Job. Note: Painting Shall Be Paid Separately Under Relevant Item.

Details: Running Contract For 10125 Mm Over-riding Curved Switches For 60 Kg 1 In 12 T/out As Per Rdso Drg .no. T-4219, Alt-9 And Conforming To Irs Specification No.t-10-2023, Fabricated Switches Should Be Complete Along With Parts/fittings As Per Rdso Drawing No. T-4218 (alt-8) &t-4219 (alt-9) , Parts/fittings List Attached As Annexure- C (latest Alteration To Rdso Drawing And Latest Alteration/revision/corrigendum/amendment To Irs Specification/technical Specification As Applicable )

Description: CATEGORY: Excavation in trenches not exceeding 1 point 5 m wide and not exc 1 point 5m deep , Excavation in trenches exceeding 1 point 5 m depth but not exceeding 3 mtr and 1 point 5 m wide , Returing filling in trenches including spreading leveling watering and well ramming in layers not exceeding 25 cm , Removing excavated material not exc 50 m and depositing where directed , Material and labour for sand filling with clean dry find sand unwashed including gently punning around cables in trenches , Material and Labour PCC 1 2 4 type B1 using 20mm graded stone aggregate as in coping of poles , Material and Labour PCC 1 3 6 type C1 using 20 mm graded black trap oblique granite oblique basalt stone , Material and Labour well burnt bricks sub class B as in protection of cable laid dry flat abutting , Providing platform for transformer of size 2point 5 into 2 point 5 into 1 point 5m high from GL including , Supply erecting and fixing in true vertical position steel tubular swaged pole 410 SP 55 11 mtr long complete with cast iron , Supply fixing commissioning and testing of outdoor gang operated switch GOD single throw single break off load , Disconnecting Taking Out and shifting of the any make of transformer rating 100 KVA mounted on plinth , Supply lay connect test and commissioning of 3 core 95 Sqmm 11000 Volts grade Earthed XLPE , Material and Labour for Cable jointing kit for 11 KV Earthed grade cable for indoor termination , Supply laying and testing cable XLPE Insulated Earthed screened PVC bedded galvanized , Supply install commissioning and testing factory made Design verified as per IS IEC61439 1 , Supply and fixing cross arms bracing supports clamps and back plates fabricated from , Pin type porcela in vitreous white brown or green insulator including , Single disc assembly for tension with tension clamps , Aluminium conductor steel reinforced , Material and Labour for earthing complete with galvanized steel earth plate

Description: CATEGORY: 5MP Lowlight IR IP H 265 Vandal Resistance Motorised VF Bullet Camera , 5MP Lowlight IR IP H 265 Vandal Resistance Compact Bullet Camera , SITC OF 2MP IR IP H 265 Vandal Resistance Compact Dome Camera , SITC OF 5MP H265 Network Vandal Resistance PTZ Dome Camera , SITC OF 128GB Surveillance class SD card , Supply and Fixing of Pole Mount for PTZ Camera , SITC OF 32ch NVR with 4 Sata HDD Support , Supply and Fixing OF Surveillance Hard Disk 08 TB , SITC OF 55INCH 4K UHD LED Surveillance grade Monitor , SITC OF 10 Port Unmanaged Gigabit Switch with 8 Port PoE , SITC OF Aggregation L2 L2 switch with SFP ports for control ROOM , Supply Drawing and Testing stranded Single mode 6 Core glass optic fiber cable , Supply Drawing and Testing 4 pair 23 AWG Solid Bare Copper wire , Supply Grouting and Fixing of Pole OEM fabricated MS GI PIPE 100 MM DIA With RCC 1Mtr depth , Manual Moling HDD depth 1 Mtr , Supply and Drawing 40 mm HDPE Pipe , Supply and fixing Weather proof Pole Mount Box , Supply and fixing of Network Rack 4U , Supply and fixing Industry standard Small form factor pluggable SFP , Supply Installation Testing of 12 Port 19 1U Rack Mounted surface mounted aluminum CRCA , Supply Installation Testing and Comissioning of 18 U Floor standing rack , Supply Drawing and Testing of 3 Core copper cable , Supply Installation Testing and Commissioning of Optical Fiber Cable Patch Cord 1 Mr , Supply Installation Testing and Commissioning of Cat 6 U UTP , Supply Installation OTDR Testing and Fusion Splicing of Fiber Single mode Pigtail , Supply and Laying of medium duty PVC Conduit 25mm , Comprehensive Maintenance Charges for 3rd Year , Comprehensive Maintenance Charges for 4th Year , Comprehensive Maintenance Charges for 5th Year