Electrical Tenders

Description: Ubl-ubl-7027-coach-24-h [pl No 98111048] Condemned & Unserviceable Bg Coach 8 Wheeler Over Aged 4 Coaches 1)swr/wgaccn/041379/ab/rcf, 2)swr/wgaccn/031122/ab/ Rcf 3) Swr/wgaccw/001173/ab/icf, 4) Swr/wgaccn/041398/ab/icf, With Complete Coach For Sale With All Ferrous, Ss Trough Floor Sheet, Aluminum, Copper, Wooden/electrical Fittings, Berths. Stainless Steel Items, Bio Toilet ( Ss) 8 Nos And 20 Ltrs Capacity Water Tanks (ss) 12 Nos . Under Sludge Water Tank ( Ss)10 Nos. Doors 16 Nos. But The Rc Items Of The Following Coaches Are To Be Returned To Railways Before Effecting The Delivery A) Bogie Complete With Brake Gear Components & Shock Absorber With Primary & Secondary Coil Springs 8 Sets (each 2 Sets) B) Wheel Sets, Axle Boxes With Bearings 16 Sets (each 4 Sets) C) Bronze Wearing-16 Piece Nos, (each 4 Nos), D) Bogie Mounted Brake Cylinders 16nos, (each 4 Nos), E) Distributor Valve 4nos (each 1 No). F) 15mm Ms Pipe For Bmbc 8nos (each 2 Nos). I .e.rc Items Are To Be Returned Railway. Centre Pivot 02 Nos Returned To Railways Coach No 1)swr/wgaccn-041379/ab/rcf (each 02 Nos).note: Cutting Permitted By Gas/manual. Location;-: Hubli Yard Between Electric Tower No.8 And Old Hbq Cabin, Approximately 50-100 Meters Kachha Road Available Near To The Lot. Custodian: Sse/carriage Shop/ubls. The Purchaser Has To Remove / Clear The Muck, Mud And Zero Value Items Released From The Condemned Coaches At The Location Before Taking Final Delivery Of The Lot And Should Ensure By The Custodian On Final Delivery. (a)purchaser Will Have To Employee His Own Labourers For The Cutting Work. (b) The Workers Employed By Him Will Be Permitted To Enter And Work In The Railway Premises During Ordinary Working Hours. (c) During The Course Of Cutting And Breaking, If Any Damage Or Loss Is Caused To Permanent Way Tracks & Railways Property The Purchasers Will Be Liable To Compensate The Railways To The Extent Of Damages Done. (d) The Purchasers Has To Remove/clear The Muck, Mud And Zero Value Items Released From The Condemned Coaches At The Location Before Taking Final Delivery Of The Lot. And Should Be Ensured By The Custodian On Final Delivery. Note: 1) Contractor As Well As The Officials Witnessing The Delivery Of Condemned Coaches Should Give A Declaration That No Waste Material Has Been Dumped In The Railway Land.

Details: Description:- Lubrication Of Curves Using Contractor's Own Track-based Lubricator (electronic Type) conforming To Rdso Technical Specification No.irs-t48, March 2022 Version 2.0 Up To Correction Slip no.2 Or Latest (as On Date Of Opening Of The Tender) With Comprehensive Maintenance With Repairs And replacement Of All Its Parts And Spares For Period Of Five Years Complete. Payment Will Be Made Per month Of Successful Lubrication. Grease Will Be Paid Separately Under Ns/2 Subject To Successful lubrication Of The Curve/s. The Lubrication Should Be Done Successfully For Carry Down Effect Of Up To 1 km In The Intended Direction As Per Para.6 Of Special Conditions Of Contract. Intended Direction Will Be direction Of Traffic In Case Of Double Line And Heaviest Traffic Direction In Single Line In Terms Of Annual gmt Of The Section. Application System Should Be Designed To Operate Either With Direct Electrical connection To Ac Power Source Or Independently Using A Solar Panel And Battery As Per Availability Of power In The Area. The Contractor Has To Arrange For Power For The Equipment At His Own Cost. If railway Provides Source Of Ac Power, The Cost Of Getting The Connection And Cost Of Power Has To Be borne By The Contractor Under Separate Term And Conditions. After Completion Of Work. Contractor shall Remove The Lubricator And All Its Assemblies As Provided By The Contractor Orginally. The Rate includes All Tools, Plants, Parts, Labour, Taxes, Transportation, Royalty Etc Complete Job. (note: Unit For payment Is Per Month Per Lubricator (every 30 Days Will Constitute One Month)

Details: Description:- Drilling And Sinking Of Deep Tubewell Of Size 250x200mm, Dia In All Classes Of Soil including Supplying And Sinking Of Standard High Density Polytheylene (upvc) Casin Pipe Of Per Is 4985 Of Sige 200mm Internal Dia In Loose Starta Extended Minimum 1m (one ) Metre Inside Hard Rock to Prevent Collapsing Of Bore. The Bottom Bore Hole Should Be Of Size 200,mm Dia Clear Internal Dia for A Minimum Defth Of 100m Below Ground Level. The Rate Shall Include Supplying And Fixing M.s.cap at Top Of Bore Well, Labour, Machinery, Materials, Consumable Item, Eading, Loading, Unloading, Lead, lift, In All Respect Complete. The Rate Shall Also Include Development Of Bore By Compressor And testing Of Yield 03 Consecutive Days For A Minimum 07 Hrs. On Each Day Continuously With Minimum 3000gph The Pump Will Be Supplied By Contractor For Testing The Yield. Note Payment Shall Be Made onlyforsuccessfulboresofanassuredwatersupplyofminimum3000gallonsperhours.for unsuccessful Bores No Payment Shall Be Made I.e. No Water No Payment Hence, While Quoting The rate. It Should Be Kept In Mind And Rate Should Include The Cost Of Sub Soil Water By Electrical resistivity Method Or Any Suitable Method Including Testing Bore Of 4.5 Inches Dia If Required. The detail Of Bore Log Should Also Be Given To The Engineer At Site.

Details: Description:- Supply, Installation And Commissioning Of Track Based Rail Lubricator ( Electronic Type) with Dual Applicator/wiper Bar Complete System As Per Rdso's Technical Specification No. Irs-t-48 along With Advanced Correction Slip No.1 With Carry Down Effect Of 1 Km & Supply Of Solar Panel And its Accessories Including Battery And Mast (or Rechargeable Battery System) For Successful Operation of Lubricator . The Firm Has To Inspect Each Location Regularly For Operation And Maintenance Not Less than 15 Days For Each Curve. Power Supply : Application System Should Be Designed To Accommodate both Direct Electrical Connection To An Ac Power Source And To Operate Independently Using A Solar panel And Battery As Per Para 7.2 Of Rdso Technical Specification For Track Based Lubricator (alternate powersourcebyrechargeablebatterycanbeprovided).therateincludesall tools,plants,parts,labour, Taxes,transportation,royalty Etc Complete Job. The Rate Also Inlcudes The Cost of Parts And Amc For 5 Years. The Machine And The Solar Panel Assembly Will Be The Property Of contractor Which Will Be Taken Back By Contractor After Successful Completion Of Job (i.e After 5 Years.) the Rate Also Includes The Testing Of Grease For Its Suitability As Per Rdso Specification (i.e Testing The grease For Its Coeffiecient Of Friction Which Should Be Less Than 0.25μ) Shall Be Done By Tenderer At A frequency Of 1 Month Or More. ( Note:- (1) If The Coefficient Of Friction In Above Test Is Found Above 0.25μ Then No Payment For That Month Will Be Done By Railway.)

Details: Providing and installing new Tubewell of size 200mm i /d straight upto 150mtr. depth BGL with Hand Boring Rig, Providing, Laying, fixing & jointing of P.V.C. Pipes 110 mm o/d pipe of 10kg/cm2 ,P/F C.I Tee A/F4"x4"x4" with cutting and Jointing with existing 100 mm i/d C.I pipe,Providing & installing,testing & commisioning of one no electrically driven Submersible Pump set capable of delivering 240 LPM against a head of 66 mtr,Providing and Fixing Electric panel board, Providing and Fixing G.I. Column Pipe of IS 1239-2004 medium class size 65 mm ,Supply and erection of PVC insulated PVC sheathed (3 core) round flexible wire with copper conductor (FR) cable (ISI marked) Overall size 2.5sq.mm (50/0.25mm), 3Core,Construction of Gravel Pit outside the Pump Chamber. (0.90m Dia.) ,Providing and installing 100 mm dia delivery main and Providing, installing, testing and commissioning one no. electrically actuated diaphragm operated, metering system, chemical dosing chlorinator complete in respect Aug. of W/S Scheme for village Barwa (1 No.) in Block Nawanshahr, Distt. SB.S. Nagar” (Under ACA Project)

Description: Hyderabad Division: (1) Replacement Of Mechanically Operated Lifting Barrier (molb) With Electrically Operated Lifting Barrier (eolb) At 9 Nos. Of Lc Gate Nos.190a, 191, 193, 219, 228, 60, 60a,61 & 127. (2) Sc-dhne Section: Elimination Of Manned Lc Gate No. 68 At Km No. 126/500-600 By Providing Rub Between Mbnr-mqn Stations, (3) Sc-dhne Section: Elimination Of Manned Lc Gate No. 138 At Km No. 253/100-200 By Providing Rub Between Krnt-duu Stations, (4) Sc-mue Section: Proposal For Construction Of Ancillary Work Like Cover Over Approaches, Humps At Approaches And Rcc Wall/lhs At Existing Rub Bridge No. 19/a, Lc No. 6 Jb, (5) Sc-mue Section : Rub Bridge No. 85/a, Lc No.18, (6) Sc-mue Section : Rub Bridge No. 127/a, Lc No.26, (7) Sc-mue Section : Rub Bridge No. 201/a, Lc No. 49, (8) Sc-mue Section : Rub Bridge No. 252a, Lc No. 62, (9) Sc-mue Section : Rub Bridge No. 260a, Lc No. 63, (10) Sc-mue Section : Rub Bridge No. 382/a, Lc No. 163, (11 Sc-mue Section : Rub Bridge No. 422/a, Lc No. 177, (12) Sc-mue Section : Rub Bridge No.435/b2, Lc No. 119, (13) Sc-mue Section : Rub Bridge No. 482/1a, Lc No. 192a, (14) Sc-mue Section : Rub Bridge No. 483, Lc No. 194, (15) Sc-mue Section: Rub Bridge No. 500/a, Lc No. 157 & (16) Sc-mue Section: Rub Bridge No. 695/a, Lc No. 242 - Signal & Telecom Arrangements

Tender Id: EL-LM-24-25-22-LUMDING DIVISION-ELECTRICAL/N F RLY | Details: Description:- Supply, Assembly, Alignment, Setup, And Startup Of 3 Kwp Solar Power Plant For A Grid power Plant. Contents: 1. Solar Power Conditioning Device With 3kwp Mono Perc Half Cut Solar Panel pv & Solar Power Conditioning Unit Mppt Based (single/ 3 Phase Wherever Applicable )2. Mounting structure For Gi Modules. 3. Earthing, Lighting Arrestors, Etc. 4. Connecting Wires, Mcbs, Cashingpipes, and Other Parts As Needed. 5. Civil Works, Such As Sand, Gravel, Cement, Etc., Are Needed To Install The module Mounting Structure. 6. Electrical Work For Pcu Load Distribution. 7- Traveling To The Final destination. 8-commissioning And Installation Are Included. 9- The Rooftop Solar Should Be Enabled with Real-time Monitoring System : Rtus Enable Real-time Monitoring Of Various Parameters Such As power Output, Energy Production, System Efficiency, Units Generated And Environmental Conditions. this Allows For Immediate Detection Of Issues And Performance Tracking Remote Control: So That The operators Can Remotely Control The Solar System, Including Starting Or Stopping Inverters, Adjusting settings, And Responding To Faults Without Needing To Be Physically Present At The Site.10-five Year amc/camc And Insurance. 11- Trim Branches That Directly Shade The Solar Panels During Peak Sunlight hours As Per Instruction Of Site Engineer. The Work To Be Executed As Per Direction Of Engineer In charge At Site. If Any Other Items Have Been Omitted But Required For Efficient Working Of Solar Power plant It Would Be Responsibility Of Contractor To Supply And Provide Such Items. However The Quoted rate Shall Be Inclusive Of Those Items.

Tender Id: EL-LM-24-25-22-RT-LUMDING DIVISION-ELECTRICAL/N F RLY | Details: Supply, Assembly, Alignment, Setup, And Startup Of 3 Kwp Solar Power Plant For A Grid power Plant. Contents: 1. Solar Power Conditioning Device With 3kwp Mono Perc Half Cut Solar Panel pv & Solar Power Conditioning Unit Mppt Based (single/ 3 Phase Wherever Applicable )2. Mounting structure For Gi Modules. 3. Earthing, Lighting Arrestors, Etc. 4. Connecting Wires, Mcbs, Cashingpipes, and Other Parts As Needed. 5. Civil Works, Such As Sand, Gravel, Cement, Etc., Are Needed To Install The module Mounting Structure. 6. Electrical Work For Pcu Load Distribution. 7- Traveling To The Final destination. 8-commissioning And Installation Are Included. 9- The Rooftop Solar Should Be Enabled with Real-time Monitoring System : Rtus Enable Real-time Monitoring Of Various Parameters Such As power Output, Energy Production, System Efficiency, Units Generated And Environmental Conditions. this Allows For Immediate Detection Of Issues And Performance Tracking Remote Control: So That The operators Can Remotely Control The Solar System, Including Starting Or Stopping Inverters, Adjusting settings, And Responding To Faults Without Needing To Be Physically Present At The Site.10-five Year amc/camc And Insurance. 11- Trim Branches That Directly Shade The Solar Panels During Peak Sunlight hours As Per Instruction Of Site Engineer. The Work To Be Executed As Per Direction Of Engineer In charge At Site. If Any Other Items Have Been Omitted But Required For Efficient Working Of Solar Power plant It Would Be Responsibility Of Contractor To Supply And Provide Such Items. However The Quoted rate Shall Be Inclusive Of Those Items.

Description: CATEGORY: LED Bulb 07 Oblique 09 Watt , LED tube light 18 Watt assy 2 feet , LED tube light 18 Watt assy 4 feet , Electronic Fan regulator dimmer type , Exhaust fan single phase 230 Oblique 240 Volts AC 1350 RPM Size 6 inch , Switch P type 5A Oblique 6A 240 V , Switch with socket combination with PVC box 5A Oblique 6A Comma 240 V comma 05 Pin , Switch with socket combination with PVC box 15A Oblique 16A Oblique 20A comma 240 V comma 05 Pin , PVC electric wire copper 1 point 0 sqmm RED , PVC electric wire copper 1 point 0 sqmm Black , PVC electric wire copper 2 point 5 sqmm Black , MCB SP 10 Oblique 16 Amp , MCB SP 32 Amp , MCB DP 32 Amp , Insulation Tape , PVC conduit pipe , Long bend for PVC conduit pipe , PVC Straight coupler , PVC pipe junction box , Switch Two way 5A Oblique 6A 240 V , SS Nails 25 mm long , Ceiling rose , PVC electric wire copper 1 point 0 sqmm Green , PVC insulated copper conductor wire , PVC electric wire copper 4 point 0 sqmm Red , PVC electric wire copper 4 point 0 sqmm Black , MCB DBs modular Type double door SPN 8 way , MCB SP 06 - 25 Amp , Screw different 35 X 8 mm wood , Angle Holder , Batten Holder , P type Bell push switch 6A , PVC Square box 3 inch X 3 inch , Rawl plug 6mm , PVC round plate 4 Inch , Call Bell Ding Dong Single phase 230 Volts , PVC round plate 7 Inch , Bosch concrete steel GBH 220 corded electric professional rotary hammer GWS 2200 , White Hylam sheet , 10mm X 7 point 5 mm dia flexible corrugated conduit pipe 12 point 5 m , CMT JT 119BO-5 Jig saw Blades , 3 mm HSS Twist drill bit , 8 mm HSS Twist drill bit , Bosch concrete comma Steel GBH 220 corded Electric Professional rotary hammer , Inditrust NA 2PC hammer bit set chisel , Stanley STA 47702L-IN7 , Hammer drill bit , Aluminium 2 core armoured 6 sqmm PVC Cable , MCB Box Metal 2 way Oblique pole , Spring wire for Electrical wiring

Description: 12316abj23d, 98050175, Quantity- 10.000 Mts. Scrap Condemned Unserviceable Ms Bazaar Scrap Consisting Of All Types Of Corroded, Rusted, Dusted Sheets, Diesel Loco Parts, Loco Filters, Mounting Pads, Rubber Pads, Brake Shoes, Broken Paint Drums, Oil Drums, Grease Drums, Packing Stripes, Gi Ducts, Tmt Bars, Hose Pipes With Ci Attachments, Boxes, Pipes, Footsteps, Wires, Rings, Strips, Filters, Nuts, Bolts, Pins, Rivets, Links, Rods, Angle Cut Pieces, Structural Frames, Brackets, Iron Boxes, C And W Items, Drums, Cocks, Basins, Wire Meshes, Wire Ropes, Wagon-coach-water Tank Cut Up Parts, Casings, Corrugated Sheets, Electrical Ft Fittings, Sockets, Filter Top And Bottom Caps, Clamps, Fuel Turbo Oil Filter, Spin On Filter, Compressor Filter, Corroded And Bent Building Rods, Washer Plates, Stands, Frames, Doors Of All Types, Sheet Cutting, Plate Cutting, Joists, Angles, Channels, Bases, Plates, Flat Cut Pieces, Vestibule Frames, All Types Of Window And Door Shutters, Racks, Deteriorated Brake Heads, Compensating Rings, Gi Sheet Pieces, Bindings, Frames, Rusted And Damaged Half Cut Drums, Wire Rope Casings, Dust Bins, Chains, Berth Strips, Tie Clamps, Gate Frames, Light Wheel Rods, Dry Paint Waste, Filter Papers, Burnt Furniture, Berth Frames, Filter Covers, Air Cooler Empty Bodies, Cylinders, Ms Mixed Scrap And Other Similar Material With Or Without Attachments Of Wood, Rubber, Foam, Rexene, Cloth, Fiber And Plastic. Note - 1.nf Material, Axles, Wheel Discs, And Rails Or Any Other Material Not Mentioned In The Description, If Found During The Delivery Are To Be Returned To Railways. 2. Excluding Lavatory Chutes, Stainless Steel Materials. 3. Track And Track Fittings Running Through This Area Are Excluded. 4. Material Is Lying Inside The Bushes, It Is The Responsibility Of The Purchaser To Collect The Material By Removing The Bushes. 5. Jcb Is Allowed For Segregating And Loading Of Material. This Being An Area Lot, There Is No Guarantee Either For Quantity Or Quality Of Material. 6. Gas Cutting Is Permitted Only To Release The Entangled Materials And Others Upto Loadable Sizes Only. 7. Material Has To Be Cleared Starting From One End. Location - At Three Locations, [bin No- 316, Right Side Of Link Road No- 2, While Approaching From Road No-1 To Road No-2, Leaving Bin Nos- 317,232,170,171 And 171a] And [bin No- 320, Left Side Of Link Road No- 3, While Approaching From Road No-1 To Road No-2, Leaving Bin No- 232] And [bin No- 174a, Left Side Of Road No- 1], Hsn Code- 72044900. Gst- 18 Percent.