Drawer Tenders

Details: Description :supply Of Smps Based Ips System Suitable For Auto Hut/ Midsection Interlocked Lc Gate in Re Area And Conforming To Rdso Specn. No. Rdso/spn/165/2023 Version 4.0 With Amendment-1, along With Remote Indication Panel. The Total Number Of Supplies And Their Modules Rating/capacity Of each Type Of Supply Shall Be As Per Attached Drawing Of Nwr. This Item Also Includes Supply Of 2 V/300 ah Lmla Batteries (55 Nos+5 Nos.) It Covers Supply Of Tool Kit Containing All Type Of Tools Required For maintenance Of Ips And Set Of Spare As Recommended/ Mentioned In Rdso Specn. No.rdso/spn/165/ 2023 Version 4.0 With Amendment-1. It Includes Supply Of Proper Hard Wood Stand For Keeping Batter ies As Per Sample Approved By Engineer At Site. The Length Of Cables To Be Supplied With Each Ips Syst em Will Be As (a) Cable From Ips System To Battery Bank - 25 Mtrs. (25 Sq Mm) (b) Cable From Ips Syste m To Asm Box - 35 Mtrs. (12 C X 1.5 Sq Mm). The Technical Specification Of These Above Said Cables Will be As Per Rdso's Letter Sts/e/ips/genl Dated 03.04.18 Installation And Commissioning Is Not Required. ]

Details: Creation of 63 KVA Electric Sub Station Moh. Makhna Ward No. 7 Pyt. Bhatidhar, 25 KVA Transformer at Ward No. 1 Panchayat Karmara Mohalla Bakarwala, Providing of Electricity by way of uncovered areas in village Gagrian Sawjian, Kanari Upper, Sib Loran, Balnoi Top, Chamrar, Doba Mora and Salani Top by way of Providing of 2x63 KVA S/Stn +3x25 KV Sub Statin alongwith HT/LT Line and Poles, Creation of 63 KVA Sub Station at Mohalla Domallan Keri Near Mohd Javir Panchyat Gulhotta Kangra, 63 KVA Transformer Mohalla Tand Ward No. 8 Pyt. (Chhungan Choudhrain), 63 KVA Transformer Nr. Pervaiz Khan Mohalla Marg Pyt. Sangoite, Creation of 63 KVA Transformer at Mohalla Sayidan Near Zarayat Ralian, Laying of LT Line at Danna Doyian Mohalla Kumaran Ward No. 1 Panchyat Timbra, Laying of LT at Qazi Mhra ward No. 1 and Creation of 63 KVA Sub Station alongwith Poles at Moh. Sheikh Maglanu Nar Mankote Nr. Mir Mohd under SSY & APDP Grant 2024-25 (All the items should be as per latest specifications and drawing adopted/Approved by Department)

Details: CATEGORY: WATER JUG 2 ltr , Hand Towel Big size , Hand Towel Small size , All out machine with RIFFIL , NIP power- , Dettol Handwash Liquid refill , HARPIK 500g , HIT , LIFEBUOY TOTAL SOAP 125gm , Phenyl 5 LTR , Fena , Gala Dust control Mop , Plastic Dust pan , Cobweb brush , All out RIFFIL , Pedal Dustbin , Dustbin large plastic , DURACELL BATTERY FOR WATCH , DURACELL BATTARY FOR REMOTE , File cover , HIGH LITER PEN , Drinking water Glass or Tumblers 275 ML , Permanent MARKER PEN LUXOR , White board marker , PEN Blue , PEN BLUE , Pen Black Cello , Pen Red Cello , PLASTIC FOLDER WHITE PKT , Register 240 pages , Register 360 Pages , Stapler HD 45 Kangaro , Stapler HD 10 Kangaro , Photo copy paper Rim , Photo copy paper Rim legal , Fevi Stick 15gm , FLAG SMALL pkt , CELLO TAP BIG , CELLO TAP SMALL 18mm , SLIP PAD , SLIP PAD SPILAR , white fluid Pen , All pin Box pkt , Scissors , INDEX FILE , Pencil , Eraser , Envelop A4 size , Envelop Normal , Paper weight , Coasters , Drawing Pin , File Board , Noting Paper , U CLIP

Details: Notice Inviting E-tender Punjab & Sind Bank, Guwahati Zonal Office Invites E- Tenders Under 2 Bids System I.e. Technical Bid & Financial Bid, From Reputed, Bona Fide And Intending Contractors In The Prescribed Format For Proposed Interior Furnishing, Electrical, Lan Cabling, Ac Works, Cctv, Fire Alarm & Civil Work For Interior Renovation & Re-furnishing Of Model Branch At R.g.barua Road, Chandmari, Guwahati, Assam. The Tender Is To Be Submitted Only By Eligible Furnisher Through Online Mode Only. Tender Documents, Technical Specification, Drawing, Bill Of Quantities Uploaded On Specific Interface Which Will Be On The Bank’s E-procurement Site. Furnisher May View The Tender Notice On Bank’s Website Https://punjabandsindbank.co.in And Download & Upload The Same From/on Bank’s E-procure Website Https://psb.eproc.in The Tender Should Be Uploaded On The Above Website Up To 17.02.2025 By 03.00pm. Technical Bid Will Be Opened On 17.02.2025 At 3.30pm. As Mentioned In The Tender Documents. The Bank Reserves Right To Cancel Any Or All Tenders And Stop The Process At Any Point Of Time Without Assigning Any Reason Or Notice Whatsoever. For Any Further Clarification/query Contact-+91-7896536440 During Office Hours From 10.00 Am To 5.00 Pm Over Phone Or In Person. Zonal Manager Click Here

Details: Description:- "metal Beam Crash Barrier Double W Single Side :providing And Erecting "w" Metal beam 02 Nos Barrier Comprising Of 2mm Thick Corrugated Sheet Metal Beam Rail On 1.50 M High channel Post (150 X 75 X 4mm)above Ground Level And 1.20m Below Ground Level, Spaced At 2m centre To Centre, All Steel Parts, All Fittings And Fitments To Be Galvanized By Hot Dip Processcon Firm to Is 4759, Metal Beam To Be Fixed On The Vertical Post Complete. Work Will Be Carried Out As Per The railway Approved Drawing And As Per Specification And Special Condition Of Contract.the Post Should be Placed Below Gl By Driven Mechanism Or Auger Mechanism As Directed By Engineer In Charge As per The Site Conditions. The Concrete And Shuttering As And When Require Will Be Paid Under The relevant Items. Note : The Item Rate Includes With Materials, Labour, Lead, Lift, Loading, Unloading, tools And Plants All Taxes, Site Cleaning,bush Cutting, Preparation Of Approach Path, Manual Carting Of materialsduetounavoidablesiterequirementetc.,withcontractor'sownmaterialandlabour neccessaryfordoingalltheworksinvolvedinconsturcutingthemetalbeamrailingbarrier completein Place In All Respects As Per The Specifications. Work Will Be Carried Out As Per Direction and Instruction Of Engineer In Charge Of Work /engineer's Representative (no Any Extra Payment Shall be Paid By Railway)"

Details: Description :supply Of Automatic Change Over Control And Distribution Panels For Cls As Per Latest Rdso specificationno.ti/spc/psi/cls/0020 With A&c Slip 1 To 4. Core Approved Drawing No.:ascos/core/2005/0 1 Rev.02 Or Latest.the Interior Of Cls Panel Shall Be Adequately Lighted By 60 Watt, 240 V Ac Lamp With A D oor Operated Switch. The Wiring Shall Be Capable To On/off The Lamp Through Door Operated Switch If Any O ne Power Supply Is Available On The Panel. The Supporting Frame And Panel Shall Be Properly Treated And Th en Under Coated Suitably To Serve As Base And Binder For The Finishing Coat Applied. The Exterior & Interior S urface And The Supporting Frame Of The Panel Shall Be Epoxy Powder Coated Of Vellum Colour In A Shade No . 365 Of Is:5. If Any Painting Surface Gets Damaged During Transit, The Surface Finish Shall Be Restored At Site after Erection. (1) 150 Amp. Capacity 240 Volts, 3 Supply, 50 Hz. For 25 Kva At(make: Isi Approved) [ Warr anty Period: 30 Months After The Date Of Delivery ] [quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total Po Value Variation Permitted: max 8 Lacs ] ]

Details: Construction Of Rcc Ghat (a) Construction Of Ghat Between old Bridge And Gau-mukh Ghat At Omkareshwar, Tehsil- Punasa, Districtkhandwa Minimum Area 600 Sqm. (b) Construction Of Ghat Between Old bridge And Nagar Ghat At Omkareshwar, Tehsil- Punasa, District- Khandwa minimum Area 10850 Sqm. (c) Construction Of Ghat Between Naveen Ghat and Abhay Ghat At Omkareshwar, Tehsil- Punasa, District- Khandwa minimum Area 8350 Sqm. (d) Construction Of Ghat At Sangam Of Narmada and Kaveri River At Omkareshwar, Tehsil- Punasa, District- Khandwa minimum Area 18350 Sqm. Including Detailed Survey, Investigations, Design, drawing With Expert Suggestions For All Essential Protection Works Such As construction Of Retaining Wall, Providing & Fixing Anchorage Arrangements, safety Railings, Slope Protection, Guide Walls, Providing And Errection Of High mast, Making Arrangements Of Foundation & Inauguration Ceremony, constructions Of Murals Including Aesthetic View, Complete Painting Work Of ghat, Construction & Redevelopment Including Widening Of Existing Approach road & Existing Stair Case From Main Road To Ghat, Supplying And Fixing Of All miscellaneous Work And As Directed By Engineer-in-charge Requires To complete Entire Work In 11 Months Including Rainy Season, Works Includes The maintenance Of Ghat For 3 Years After Completion Of Work With 3 Years Defect liability Period Both Are Running Simultaneously.

Description: 829921690010 srph346350-vacutainer Needle With Visibility Of Blood Entry 21g For Multi-sample Colle ction Should Have The Following Specifications: 1). The Designing Of The Needles Should Be Such Th at It Can Able To Minimize The Pre- Analytical Variability Throughout The Specimen Collection And H andling Process To Ensure Reliable Results And Should Be Suitable For Faster Procedures. 2). The needles Should Be Suitable For Closed- System Blood Collection I.e Drawing Blood Directly From T he Vein Into Vacuum Collection Tubes To Prevent Exposure Of Atmosphere. 3). The Needles Should B e Suitable For Multi- Sample Collection.4). Needles Should Be Sterile, Double-ended With A Sleeve C overed Safety Valve For Use With Vacutainer Tube Holder And Vacuum Blood Collection Tubes. 5). S ize Of The Needle Should Be 21g X 1 Inch (gauge: 21g, Length: 1 Inch./25 Mm).6) Needle Design Should provide Instant Confirmation Of Needle Placement, Through Visual Flashback Indication.7). There S hould Be A Chamber Or Similar Arrangement At The Needle Junction For Easy Visual Confirmation Of blood Flow Entry.8). Needle Should Have Low-angle Bevel Design And Should Be Coated With Silico ne/ Similar Low Friction Lubricant Coating To Ensure Gentle And Smooth Vein Entry (for Smooth Pai nless Pricking To The Patients 9). The Firm Should Provide Certificate Of Compliance Report For Eve ry Batch And Material Used For Making The Needle And Sterilization Of The Needle Should Comply W ith Iso Standards.10). The Product Should Be Bis/iso/ce/us Fda Certified And Should Produce The Ce rtificate While Quoting In The Tender.11). The Firm Should Supply Suitable Needle Holders Along Wit h The Needle Supply And Also Should Submit Adequate Sampling Material For Checking Suitability & for Validation, Verification Of Productunit:no ] consignee Acms/drug Stores/rh/pgt, Sr Kerala 1000.00 Numbers

Description: 829921690010 srph346350-vacutainer Needle With Visibility Of Blood Entry 21g For Multi-sample Colle ction Should Have The Following Specifications: 1). The Designing Of The Needles Should Be Such Th at It Can Able To Minimize The Pre- Analytical Variability Throughout The Specimen Collection And H andling Process To Ensure Reliable Results And Should Be Suitable For Faster Procedures. 2). The needles Should Be Suitable For Closed- System Blood Collection I.e Drawing Blood Directly From T he Vein Into Vacuum Collection Tubes To Prevent Exposure Of Atmosphere. 3). The Needles Should B e Suitable For Multi- Sample Collection.4). Needles Should Be Sterile, Double-ended With A Sleeve C overed Safety Valve For Use With Vacutainer Tube Holder And Vacuum Blood Collection Tubes. 5). S ize Of The Needle Should Be 21g X 1 Inch (gauge: 21g, Length: 1 Inch./25 Mm).6) Needle Design Should provide Instant Confirmation Of Needle Placement, Through Visual Flashback Indication.7). There S hould Be A Chamber Or Similar Arrangement At The Needle Junction For Easy Visual Confirmation Of blood Flow Entry.8). Needle Should Have Low-angle Bevel Design And Should Be Coated With Silico ne/ Similar Low Friction Lubricant Coating To Ensure Gentle And Smooth Vein Entry (for Smooth Pai nless Pricking To The Patients 9). The Firm Should Provide Certificate Of Compliance Report For Eve ry Batch And Material Used For Making The Needle And Sterilization Of The Needle Should Comply W ith Iso Standards.10). The Product Should Be Bis/iso/ce/us Fda Certified And Should Produce The Ce rtificate While Quoting In The Tender.11). The Firm Should Supply Suitable Needle Holders Along Wit h The Needle Supply And Also Should Submit Adequate Sampling Material For Checking Suitability & for Validation, Verification Of Productunit:no ] consignee Acms/drug Stores/rh/pgt, Sr Kerala 1000.00 Numbers

Details: CATEGORY: 1. SWG Gasket With OR, As Per ASME B16.20 SIZE 0.5 Inch X 150- , 2. SWG Gasket With OR, As Per ASME B16.20 SIZE 0.75 Inch X 150- , 3. SWG Gasket With OR, As Per ASME B16.20 SIZE 1 Inch X 150- , 4. SWG Gasket With OR, As Per ASME B16.20 SIZE 1.5 Inch X 150- , 5. SWG Gasket With OR, As Per ASME B16.20 SIZE 2 Inch X 150- , 6. SWG Gasket With OR, As Per ASME B16.20 SIZE 2.5 Inch X 150- , 7. SWG Gasket With OR, As Per ASME B16.20 SIZE 3 Inch X 150- , 8. SWG Gasket With OR, As Per ASME B16.20 SIZE 4 Inch X 150- , 9. SWG Gasket With OR, As Per ASME B16.20 SIZE 6 Inch X 150- , 10. SWG Gasket With OR, As Per ASME B16.20 SIZE 10 InchX 150- , 11. SWG Gasket With OR, As Per ASME B16.20 SIZE 12 Inch X 150- , 12. SWG Gasket With OR, As Per ASME B16.20 SIZE 14 Inch X 150- , 13. SWG Gasket With OR, As Per ASME B16.20 SIZE 18 Inch X 150- , 14. SWG Gasket With OR, As Per ASME B16.20 SIZE 0.5 Inch X 300- , 15. SWG Gasket With OR, As Per ASME B16.20 SIZE 0.75 Inch X 300- , 16. SWG Gasket With OR, As Per ASME B16.20 SIZE 1 Inch X 300- , 17. SWG Gasket With OR, As Per ASME B16.20 SIZE 2 Inch X 300- , 18. SWG Gasket With OR, Winding Material SS 316, As Per ASME B16.20 SIZE 2.5 Inch X 300- , 19. SWG Gasket With OR, As Per ASME B16.20 SIZE 3 Inch X 600- , 20. SWG Gasket With OR, As Per ASME B16.20 SIZE 18 Inch X 600- , 21. SWG Gasket Without Ring, Size- Gsk OD 475 mm X Gsk ID - 377 mm X Gsk Thk- 3.5 mm , 22. SWG Gasket With OR, As Per ASME B16.20 SIZE 4 Inch X 150- , 23. SWG Gasket With Ring, Size- OR OD 336mm x Gsk OD 315 mm X Gsk ID - 285 mm X IR ID - 265 x Gsk Thk- 4.5 mm x Ring Thk -3.2mm , 24. SWG Ring, Size- OR OD 400mm x Gsk OD 373 mm X Gsk ID 340 mm X IR ID - 303 x Gsk Thk- 4.5 mm x Ring Thk -3.2mm , 25. SWG Gasket Without Ring, Size- Gsk OD 50 mm X Gsk ID - 40 mm X Gsk Thk- 3.2 mm , 26. SWG Gasket Without Ring, Size- Gsk OD 330 mm X Gsk ID - 306 mm X Gsk Thk- 3.2 mm , 27. SWG Gasket Without Ring, Size- Gsk OD 100 mm X Gsk ID - 75 mm X Gsk Thk- 3.2 mm , 28. SWG Gasket Without Ring, Size- Gsk OD 405 mm X Gsk ID - 385 mm X Gsk Thk- 4.5 mm , 29. SWG Gasket Without Ring, Winding Material SS 316, Filler Material Expanded Graphite Size- Gsk OD 200 mm X Gsk ID - 160 mm X Gsk Thk- 4.5 mm , 30. SWG Gasket Without Ring, Size- Gsk OD 130 mm X Gsk ID - 100 mm X Gsk Thk- 4.5 mm , 31. SWG Gasket Without Ring, Size- Gsk OD 108 mm X Gsk ID - 91 mm X Gsk Thk- 4 mm , 32. SWG Gasket Without Ring, Size- Gsk OD 165 mm X Gsk ID - 150 mm X Gsk Thk- 4 mm , 33. SWG Gasket Without Ring, Size- Gsk OD 102 mm X Gsk ID - 92 mm X Gsk Thk- 4.5 mm. , 34. SWG Gasket Without Ring, valve size 80. Size- M-82-N-62-O-114,P-134,W-3.5 Drawing attached. , 35. SWG Gasket Without Ring, valve size 100. Size- M-87-N-67-O- 142,P-162,W-3.5 Drawing attached. , 36. SWG Gasket Without Ring, valve size 150. Size- M-114-N-89-O-205,P- 230,W-3.5 Drawing attached. , 37. SWG Gasket Without Ring, size 350. Size- M-195-N-135-O-415,P-475,W-3.5 Drawing attached. , 38. SWG Gasket Without Ring, Size- Gsk OD 220 mm X Gsk ID - 185 mm X Gsk Thk- 4.5 mm. , 39. SWG Gasket Without Ring, Size- Gsk OD 405 mm X Gsk ID 385 mm X Gsk Thk 4.5 mm , 40. SWG Gasket With OR, As Per ASME B16.20 SIZE 1 Inch X 1500- , 41. SWG Gasket With OR, As Per ASME B16.20 SIZE 2.5 Inch X 600-