Drawer Tenders

Details: Construction Of Rcc Ghat (a) Construction Of Ghat Between old Bridge And Gau-mukh Ghat At Omkareshwar, Tehsil- Punasa, Districtkhandwa Minimum Area 600 Sqm. (b) Construction Of Ghat Between Old bridge And Nagar Ghat At Omkareshwar, Tehsil- Punasa, District- Khandwa minimum Area 10850 Sqm. (c) Construction Of Ghat Between Naveen Ghat and Abhay Ghat At Omkareshwar, Tehsil- Punasa, District- Khandwa minimum Area 8350 Sqm. (d) Construction Of Ghat At Sangam Of Narmada and Kaveri River At Omkareshwar, Tehsil- Punasa, District- Khandwa minimum Area 18350 Sqm. Including Detailed Survey, Investigations, Design, drawing With Expert Suggestions For All Essential Protection Works Such As construction Of Retaining Wall, Providing & Fixing Anchorage Arrangements, safety Railings, Slope Protection, Guide Walls, Providing And Errection Of High mast, Making Arrangements Of Foundation & Inauguration Ceremony, constructions Of Murals Including Aesthetic View, Complete Painting Work Of ghat, Construction & Redevelopment Including Widening Of Existing Approach road & Existing Stair Case From Main Road To Ghat, Supplying And Fixing Of All miscellaneous Work And As Directed By Engineer-in-charge Requires To complete Entire Work In 11 Months Including Rainy Season, Works Includes The maintenance Of Ghat For 3 Years After Completion Of Work With 3 Years Defect liability Period Both Are Running Simultaneously.

Details: SET OF SEATS & BERTHS FOR LHB GS COACHES. FOLLOW CUSHIONING MATERIAL PU F OAM TO RDSO SPEC. RDSO/2007/CG-04 REV.-01 AND UPHOLSTERY TO RDSO SPEC.RDSO/2008/CG-07 REV.-01 WITHOUT FIRE BARRIER. FOLLOW COLOUR SHADE ALNAC-03 FOR UPHOLSTERY. FOR PAINTIN G OF THE VISIBLE METALLIC PORTIONS OF SEATS & BERTHS COLOUR SHADE RAL-9006 TO BE FOLLO WED., as per Drawing: MPLSEATGS VERSION 0, Packing Instruction: ALL PROTRUDING PORTIONS OF S EAT/BERTH SHOULD BE PROTECTED WITH ENVIRONMENT FRIENDLY PRE MOULDED THERMOCOL CAP OF REQUISITE STRENGTH OR SILICON RUBBER CAP AS AN ALTERNATE OPTION. EACH INDIVIDUAL SEA T/BERTH SHOULD BE COVERED WITH BIODEGRADABLE BUBBLE SHEET OF DIAMETER 10MM AND THIC KNESS 30 MICRON ALL ROUND. FLAP OF BERTH SHOULD BE OUTSIDE THE BUBBLE SHEET PACKING LE AVING SEAT & BERTH MOUNTING UNCOVERED. THEN IT SHOULD BE WRAPPED ALL ROUND IN THICK L AMINATED JUTE FABRIC OF SUFFICIENT STRENGTH. THE ASSEMBLY SHOULD BE TIED WITH NYLON STR IPS. IT IS FURTHER WRAPPED WITH BIODEGRADABLE POLYTHENE ALL ROUND TO PREVENT INGRESS O F DUST/WATER. FOR THE FOLLOWING ITEMS (IF COVERED UNDER S&B SET) THE ITEM-WISE PI (LATEST VER.) WILL B

Details: Supplying, Fabrication, Erection on suitable RCC foundation and Commissioning including 3 (three) months Trial Run and 5 (five) years Operation and Maintenance including cost of routine testing of water sample for performance evaluation of Pressure Type Iron Removal Plant (Cumulative Capacity of 420 cum /hr)as per design norms of the P.H.E. Dte. with necessary accessories viz. MS fabricated shell with minimum 10 mm thick MS plate with 2 (two) coats of anticorrosive paint minimum 12 mm thick MS media supporting plate fitted with required no. of pot strainer, MS fabricated oxidation chamber with minimum 10 mm thick plate with necessary pipe connection, valves, Gauges & other instruments as required including preparation of detailed design & drawings duly vetted from IIT/NIT/JU/IIEST and the same is approved from the Deptt. including cost of filter media, Air Compressor & Air blower with motor, starter, main switch etc. of required capacity & approved specification including power connection from main line etc. all complete and construction of Blower Room, concrete platform & drain...etc. with common manifold connection for the water supply scheme within Buniadpur Municipality (Zone -1 to 7) under AMRUT 2.0.

Details: Description :mch Lock Assembly With 2 Key As Per Specification. Size: As Per Drawing No- B8/rs/72 57 Material: Main Body Lock - Free Cutting Brass (c3604bd) Cylinder-c3604bd, Cr-plate Latch-stainle ss Steel Bar (sus304) Finish Main Body: Nickel Plating (mbni) Lock: Chrom Plating (mbcr) Key Turn 9 00 Hardness: Ss Material - 70 Hrb Brass Material - 22-133 Hrb Uts (ultimate Tensile Strength ): 50 0-700 Mpa Endurance Test: 40,000 Cycles Operation Material Composition: Copper - 56.69%, Zinc - 3 8.67%, Tin - 0.600%, Lead - 2.28%, Iron - 0.620%, Aluminium - 0.510%, Nickel - 0.520%, Manganese - 0.038%, Arsenic - 0.012%, Phosporus - 0.013% And Silicon - 0.038% Hardness: 22-133 Hrb Uts (ult imate Tensile Strength ): 124-1030 Mpa Endurance Test: 40,000 Cycles Operation Note: All The Test C ertificates Should Be From Nabl Accredited Labs And Duly Signed And Sealed By A Signatory Authority of The Supplier. Make: Melco/takigen/amar Trading. ]

Details: Notice Inviting E-tender Punjab & Sind Bank, Guwahati Zonal Office Invites E- Tenders Under 2 Bids System I.e. Technical Bid & Financial Bid, From Reputed, Bona Fide And Intending Contractors In The Prescribed Format For Interior Furnishing (allied Works) Of Zonal Office Guwahati On 4th Floor Of Sethi Trust Building At Bhangaghar, G.s. Road, Guwahati, Assam. The Tender Is To Be Submitted Only By Eligible Furnisher Through Online Mode Only. Tender Documents, Technical Specification, Drawing, Bill Of Quantities Uploaded On Specific Interface Which Will Be On The Bank’s E-procurement Site. Furnisher May View The Tender Notice On Bank’s Website Https://punjabandsindbank.co.in And Download & Upload The Same From/on Bank’s E-procure Website Https://psb.eproc.in The Tender Should Be Uploaded On The Above Website Up To 24.02.2025 By 03.00pm. Technical Bid Will Be Opened On 24.02.2025 At 3.30 Pm. As Mentioned In The Tender Documents. The Bank Reserves Right To Cancel Any Or All Tenders And Stop The Process At Any Point Of Time Without Assigning Any Reason Or Notice Whatsoever. For Any Further Clarification/query Contact-+91-7896536440 During Office Hours From 10.00 Am To 5.00 Pm Over Phone Or In Person. Zonal Manager Click Here

Details: Notice Inviting E-tender Punjab & Sind Bank, Guwahati Zonal Office Invites E- Tenders Under 2 Bids System I.e. Technical Bid & Financial Bid, From Reputed, Bona Fide And Intending Contractors In The Prescribed Format For Proposed Interior Furnishing, Electrical, Lan Cabling, Ac Works, Cctv, Fire Alarm & Civil Work For Interior Renovation & Re-furnishing Of Model Branch At Deulahland, Imphal, Manipur. The Tender Is To Be Submitted Only By Eligible Furnisher Through Online Mode Only. Tender Documents, Technical Specification, Drawing, Bill Of Quantities Uploaded On Specific Interface Which Will Be On The Bank’s E-procurement Site. Furnisher May View The Tender Notice On Bank’s Website Https://punjabandsindbank.co.in And Download & Upload The Same From/on Bank’s E-procure Website Https://psb.eproc.in The Tender Should Be Uploaded On The Above Website Up To 26.02.2025 By 03.00pm. Technical Bid Will Be Opened On 26.02.2025 At 3.30pm. As Mentioned In The Tender Documents. The Bank Reserves Right To Cancel Any Or All Tenders And Stop The Process At Any Point Of Time Without Assigning Any Reason Or Notice Whatsoever. For Any Further Clarification/query Contact-+91-7896536440 During Office Hours From 10.00 Am To 5.00 Pm Over Phone Or In Person. Zonal Manager Click Here

Details: CATEGORY: Pencil HB Platinum, 10 Nos. in each packet , U Clip 28 mm Plastic , U Clip 35 mm MS Vikram , Stapler No. 10 Kangaroo , Clip Board Plastic Omega , Pilot Pen V5 , Highlighter Set Luxor , OHP Pen Set Fabre Castle , Stapler Pin for No. 10 , Correcting Fluid Pen UNI German , Permanent Marker Reynold , White Board Marker Reynold , Paper Pin assorted 100 Gm Vikram Pkt , Paper Cutter L , Lamination Pouch A4 Size, 100 Nos. per Packet , Stapler Pin, 24 by 6 , Signature Folder Clip file and Lever File , Eraser Non Dust, Apsara Jumbo, Pack of 20 Nos. , Laminated Colour Sheets for covering of registers , Divisional Folders Display book 60 Pkts with colour Paper , Duster Magnetic for White Board , Patti Folders, Pack of 10 Nos. , Drawing Pin 1.9 cms, 50 Nos per packet , Flat Ruler 12 in , Ruler Plastic 18 in , Bull dog clip, Pack of 12 Nos. , Tag cotton small, 100 nos. in each bundle , Twine Jute , Registers Ruled 4 Qrs , Registers Ruled 2 Qrs , Exercise book SQ Ruled , Pack of 10 Nos. , Short Hand Book

Description: 829921690010 srph346350-vacutainer Needle With Visibility Of Blood Entry 21g For Multi-sample Colle ction Should Have The Following Specifications: 1). The Designing Of The Needles Should Be Such Th at It Can Able To Minimize The Pre- Analytical Variability Throughout The Specimen Collection And H andling Process To Ensure Reliable Results And Should Be Suitable For Faster Procedures. 2). The needles Should Be Suitable For Closed- System Blood Collection I.e Drawing Blood Directly From T he Vein Into Vacuum Collection Tubes To Prevent Exposure Of Atmosphere. 3). The Needles Should B e Suitable For Multi- Sample Collection.4). Needles Should Be Sterile, Double-ended With A Sleeve C overed Safety Valve For Use With Vacutainer Tube Holder And Vacuum Blood Collection Tubes. 5). S ize Of The Needle Should Be 21g X 1 Inch (gauge: 21g, Length: 1 Inch./25 Mm).6) Needle Design Should provide Instant Confirmation Of Needle Placement, Through Visual Flashback Indication.7). There S hould Be A Chamber Or Similar Arrangement At The Needle Junction For Easy Visual Confirmation Of blood Flow Entry.8). Needle Should Have Low-angle Bevel Design And Should Be Coated With Silico ne/ Similar Low Friction Lubricant Coating To Ensure Gentle And Smooth Vein Entry (for Smooth Pai nless Pricking To The Patients 9). The Firm Should Provide Certificate Of Compliance Report For Eve ry Batch And Material Used For Making The Needle And Sterilization Of The Needle Should Comply W ith Iso Standards.10). The Product Should Be Bis/iso/ce/us Fda Certified And Should Produce The Ce rtificate While Quoting In The Tender.11). The Firm Should Supply Suitable Needle Holders Along Wit h The Needle Supply And Also Should Submit Adequate Sampling Material For Checking Suitability & for Validation, Verification Of Productunit:no ] consignee Acms/drug Stores/rh/pgt, Sr Kerala 1000.00 Numbers

Description: 829921690010 srph346350-vacutainer Needle With Visibility Of Blood Entry 21g For Multi-sample Colle ction Should Have The Following Specifications: 1). The Designing Of The Needles Should Be Such Th at It Can Able To Minimize The Pre- Analytical Variability Throughout The Specimen Collection And H andling Process To Ensure Reliable Results And Should Be Suitable For Faster Procedures. 2). The needles Should Be Suitable For Closed- System Blood Collection I.e Drawing Blood Directly From T he Vein Into Vacuum Collection Tubes To Prevent Exposure Of Atmosphere. 3). The Needles Should B e Suitable For Multi- Sample Collection.4). Needles Should Be Sterile, Double-ended With A Sleeve C overed Safety Valve For Use With Vacutainer Tube Holder And Vacuum Blood Collection Tubes. 5). S ize Of The Needle Should Be 21g X 1 Inch (gauge: 21g, Length: 1 Inch./25 Mm).6) Needle Design Should provide Instant Confirmation Of Needle Placement, Through Visual Flashback Indication.7). There S hould Be A Chamber Or Similar Arrangement At The Needle Junction For Easy Visual Confirmation Of blood Flow Entry.8). Needle Should Have Low-angle Bevel Design And Should Be Coated With Silico ne/ Similar Low Friction Lubricant Coating To Ensure Gentle And Smooth Vein Entry (for Smooth Pai nless Pricking To The Patients 9). The Firm Should Provide Certificate Of Compliance Report For Eve ry Batch And Material Used For Making The Needle And Sterilization Of The Needle Should Comply W ith Iso Standards.10). The Product Should Be Bis/iso/ce/us Fda Certified And Should Produce The Ce rtificate While Quoting In The Tender.11). The Firm Should Supply Suitable Needle Holders Along Wit h The Needle Supply And Also Should Submit Adequate Sampling Material For Checking Suitability & for Validation, Verification Of Productunit:no ] consignee Acms/drug Stores/rh/pgt, Sr Kerala 1000.00 Numbers

Details: CATEGORY: 1. SWG Gasket With OR, As Per ASME B16.20 SIZE 0.5 Inch X 150- , 2. SWG Gasket With OR, As Per ASME B16.20 SIZE 0.75 Inch X 150- , 3. SWG Gasket With OR, As Per ASME B16.20 SIZE 1 Inch X 150- , 4. SWG Gasket With OR, As Per ASME B16.20 SIZE 1.5 Inch X 150- , 5. SWG Gasket With OR, As Per ASME B16.20 SIZE 2 Inch X 150- , 6. SWG Gasket With OR, As Per ASME B16.20 SIZE 2.5 Inch X 150- , 7. SWG Gasket With OR, As Per ASME B16.20 SIZE 3 Inch X 150- , 8. SWG Gasket With OR, As Per ASME B16.20 SIZE 4 Inch X 150- , 9. SWG Gasket With OR, As Per ASME B16.20 SIZE 6 Inch X 150- , 10. SWG Gasket With OR, As Per ASME B16.20 SIZE 10 InchX 150- , 11. SWG Gasket With OR, As Per ASME B16.20 SIZE 12 Inch X 150- , 12. SWG Gasket With OR, As Per ASME B16.20 SIZE 14 Inch X 150- , 13. SWG Gasket With OR, As Per ASME B16.20 SIZE 18 Inch X 150- , 14. SWG Gasket With OR, As Per ASME B16.20 SIZE 0.5 Inch X 300- , 15. SWG Gasket With OR, As Per ASME B16.20 SIZE 0.75 Inch X 300- , 16. SWG Gasket With OR, As Per ASME B16.20 SIZE 1 Inch X 300- , 17. SWG Gasket With OR, As Per ASME B16.20 SIZE 2 Inch X 300- , 18. SWG Gasket With OR, Winding Material SS 316, As Per ASME B16.20 SIZE 2.5 Inch X 300- , 19. SWG Gasket With OR, As Per ASME B16.20 SIZE 3 Inch X 600- , 20. SWG Gasket With OR, As Per ASME B16.20 SIZE 18 Inch X 600- , 21. SWG Gasket Without Ring, Size- Gsk OD 475 mm X Gsk ID - 377 mm X Gsk Thk- 3.5 mm , 22. SWG Gasket With OR, As Per ASME B16.20 SIZE 4 Inch X 150- , 23. SWG Gasket With Ring, Size- OR OD 336mm x Gsk OD 315 mm X Gsk ID - 285 mm X IR ID - 265 x Gsk Thk- 4.5 mm x Ring Thk -3.2mm , 24. SWG Ring, Size- OR OD 400mm x Gsk OD 373 mm X Gsk ID 340 mm X IR ID - 303 x Gsk Thk- 4.5 mm x Ring Thk -3.2mm , 25. SWG Gasket Without Ring, Size- Gsk OD 50 mm X Gsk ID - 40 mm X Gsk Thk- 3.2 mm , 26. SWG Gasket Without Ring, Size- Gsk OD 330 mm X Gsk ID - 306 mm X Gsk Thk- 3.2 mm , 27. SWG Gasket Without Ring, Size- Gsk OD 100 mm X Gsk ID - 75 mm X Gsk Thk- 3.2 mm , 28. SWG Gasket Without Ring, Size- Gsk OD 405 mm X Gsk ID - 385 mm X Gsk Thk- 4.5 mm , 29. SWG Gasket Without Ring, Winding Material SS 316, Filler Material Expanded Graphite Size- Gsk OD 200 mm X Gsk ID - 160 mm X Gsk Thk- 4.5 mm , 30. SWG Gasket Without Ring, Size- Gsk OD 130 mm X Gsk ID - 100 mm X Gsk Thk- 4.5 mm , 31. SWG Gasket Without Ring, Size- Gsk OD 108 mm X Gsk ID - 91 mm X Gsk Thk- 4 mm , 32. SWG Gasket Without Ring, Size- Gsk OD 165 mm X Gsk ID - 150 mm X Gsk Thk- 4 mm , 33. SWG Gasket Without Ring, Size- Gsk OD 102 mm X Gsk ID - 92 mm X Gsk Thk- 4.5 mm. , 34. SWG Gasket Without Ring, valve size 80. Size- M-82-N-62-O-114,P-134,W-3.5 Drawing attached. , 35. SWG Gasket Without Ring, valve size 100. Size- M-87-N-67-O- 142,P-162,W-3.5 Drawing attached. , 36. SWG Gasket Without Ring, valve size 150. Size- M-114-N-89-O-205,P- 230,W-3.5 Drawing attached. , 37. SWG Gasket Without Ring, size 350. Size- M-195-N-135-O-415,P-475,W-3.5 Drawing attached. , 38. SWG Gasket Without Ring, Size- Gsk OD 220 mm X Gsk ID - 185 mm X Gsk Thk- 4.5 mm. , 39. SWG Gasket Without Ring, Size- Gsk OD 405 mm X Gsk ID 385 mm X Gsk Thk 4.5 mm , 40. SWG Gasket With OR, As Per ASME B16.20 SIZE 1 Inch X 1500- , 41. SWG Gasket With OR, As Per ASME B16.20 SIZE 2.5 Inch X 600-