Drawer Tenders

Details: Description :manufacture And Supply Of 11200 Mm Curved Switches With Zu1 -60 /60e1a1 Thick Web Tongue Rail For 1 In 16 Turnout Bg(1673 Mm) F or 60kg (uic)/60e1 On Psc Sleepers To Rdso Drg No. T- 7076(alt-3) Or Latest Alteration If Any With All Fittings As Per Attached Annexure-a And Conformi ng To Irs-t-10-2023. (the Alt. In Drawings & Specification Issued By Rdso Up To Ten Days Prior To Tender Opening Date Shall Be Applicable In This Tende r) [ Warranty Period: 30 Months After The Date Of Delivery ] ]

Details: CATEGORY: Pre filter pump Assembly complete with motor , Starter or control Panel , Gauge assembly board with suction and discharge pressure gauge pipes isolation cocks etc , Loose fittings and instrumentation as applicable , Shock mounts with center and side holding down fasteners , Flexible pipes or bellows for all equipments interfaces with external or loose supplied system , Electrical items for connectorisation termination lugs glands etc , First submission on binding drawing , Documentation hard copy , Documentation softy copy , IETM documentation , Service of service engineer , Preservation and De preservation , Commissioning spares , On boards spares , Standard and Special Tools , Training and Training material

Details: Description :supply Installation And Commissioning Of Complete Lt Driving Wheel Assembly For Eot Crane No. 475/87 Capacity 35 t/10t. Wheel Od: 680mm X Thick 160mm. Axle Od: 150mm X 520mm Lg. Bearing Housing, Cover & Bearing No. 22226. Liquid Dye pentrant Test, Dimension Report, Chemical And Mechanical Report With Inspection Certificate From Govt. Approved Test House Or Na bl Accredited Lab Must Accompany With Supply. Details As Per The Annexure And Drawing Attached. [ Warranty Period: 12 Mont hs After The Date Of Delivery ] ]

Details: Supply And Installation Of One Coach Set Of Seats And Berths With Hardwar Es For Lwscn Pp Coach To Drawing 755-6-1-004, Col-1, Alt-b, (except Items 19,20,24,25,26 An D Their Respective Hardwares Required For Fitting) Cushioning Material Shall Be Of Pu F Oam Conforming To Rdso Specification Rdso/2007/cg-04, Rev.01 Or Latest. Note: Firm Has T He Option For Offering Seats And Berths Cushion With Lower Density Of 65 Plus Or Minus 5 Kg/m3 Conforming To Spec.rdso/2007/cg-04,rev-01 Or Latest Also. Requirements And Col Our Of Upholstery Shall Be As Per Letter No.md/d/ss/103b Dated-16.07.2024 And Letter No. Md/ss/lhb/ac/103/f Dated-15.07.2024 & Md/d/ss/103b Dt.10.08.2024 Respectively. Colour Of T He Aluminium Tub And Aluminium Moulding Shall Be As Per Letter No.md/ss/lhb/ac/103/f Da Ted-12.09.2024 Upholstery Sample To Be Submitted To Icf Design For Approval Along With Test Certificates. Please Visit Icf Vendor Portal For Downloading Drawing Https://vp.icf.gov.in/vendt Endordetnew.php Using Key: 0725gid0tof1829 [ Warranty Period: 120 Months After The Date Of Deli Very ] ]

Details: Description :direct On Line Starter With 2 Sets Of 3 Pole / 4 Pole Contactors (2 Sets Ac Contactor Coils, 25 A mp Each), Each Set Controlled Separately By 415v. 50hz Ac Contactor Coils. One Set Of Contactor Coil Is To B e Controlled By The Forward Direction Of Rotation Through An Inching Type Push Button And The Other Set Thro ugh Another Inching Button To Control The Reverse Direction Of 7.5 Hp, 3phase, 50hz, 415volts, Ac Motor. Th ere Must Be Electrical Interlocking Contact To Prevent Both Set Of Contactors To Close Simultaneously. Each of Above Push Buttons Should Have One Normally Closed Auxiliary Contact And One Stop Push Buttons Are Re quired. The Starter Shall Be Complete With Over Load, Shall Be Wired And Shall Be Provided With Power Plug and Socket With Locking Arrangement As Shown In Schematic Drawing No. 1736/23 And 1737/23 Alt.-1. Each starter Is To Be Provided With 2 Nos. Power Plug And Sockets And 2 Nos. Of Control Plug And Sockets. Maxim um Dimension Of The Starter Should Not Excessed 280mm (b) X 360mm (l) X 162mm (t) Irrespective Of Di mension Given In Drawing. Material Specification: Is: 13947 Pt.-4 Sec.-1, 1993, Make: Bch Or Siemens Or H avells Or Jeevan Or Schneider Or L&t. [ Warranty Period: 30 Months After The Date Of Delivery ] ]

Description: CATEGORY: HT STORAGE UNIT FINISHED IN LAMINATE , PROVIDING AND STORAGE UNIT FINISHED IN LAMINATE , PROVIDING AND FIXING TV UNIT WALL PANELING FINISHED IN LAMINATE AS PER DESIGN , PROVIDING AND MAKING OF STAFF WORKING DESK FINSHED IN LAMINATE FINISHED , PROVIDING AND MAKING OF SIDE RUNNER STORAGE WITH SET OF DRAWERS FINISHED IN LAMINATE , PROVIDING AND FIXING FILE STOTAGE UNIT FINISHED IN LAMINATE , PROVIDING AND FIXING FIXED PARTITION WALL FINISHED IN LAMINATE AS PER DESIGN , PROVIDING AND FIXING OF PANELING FINISHED IN LAMINATE , PROVIDING AND FIXING OF WALL PANELING BEHIND STAFF WORKING DESIGN FINISHED IN LAMINATE , PROVIDING AND MAKING BRANDING WALL PANELING FOR LIGHT FINISHED IN PAINT , PROVIDING AND MAKING FILE PRINTER AND DISPLAY STORGAE UNIT FINISHED IN LAMINATE , PROVIDING AND MAKING CONFERENCE TV UNIT WALL PANELING WITH LOW HT STORAGE UNIT FINISHED IN LAMINATE AS PER DESIGN , PROVIDING AND MAKING OF STAFF WORKSTATION AND INDOOR PLANT UNIT FINISHED IN LAMINATE , PROVIDING AND FIXING CURTAIN PELMET FINISHED IN PAINT , PROVIDING AND FIXING MODEL DISPLAY LOW HT FINISHED IN LAMINATE , PROVIDING AND FIXING PANELING ON WOODEN CEILING FINISHED IN LAMINATE , PROVIDING AND MAKING OF FIXED PARTITION WALL WITH SLIDING DOOR FINISHED IN LAMINATE , PROVIDING AND FIXING WALLPAPER AS PER DESIGN , PROVIDING AND MAKING DIRECTORS TV UNIT WALL PANELING WITH LOW HT STORAGE UNIT FINISHED IN LAMINATE AS PER DESIGN , PROVIDING AND FIXING OF DISPLAY STORAGE UNIT FINISHED IN LAMINATE AS PER DESIGN , PROVIDING AND FIXING OF PROFILE GLASS PARTITION , PROVIDING AND FIXING CONFERENCE TABLE FINISHED IN MARBLE AND METAL AS PER DESIGN , PROVIDING AND FIXING TV FIXED PARTITION WALL WITH DOOR FINISHED IN LAMINATE , PROVIDING AND FIXING OF FILE STORAGE SHELF FINISHED IN LAMINATE , PROVIDING AND FIXING LIFT DUCT DOOR FINISHED IN LAMINATE , PROVIDING AND FIXING CEILING RAFTERS FINISHED IN LAMINATE , PROVIDING AND FIXING FIXED PARTITION WALL WITH DOOR FINISHED IN LAMINATE , PROVIDING AND FIXING FILE STORAGE UNIT FINISHED IN LAMINATE , PROVIDING AND FIXING PIPE COVERING FINISHED IN ACP , PROVIDING AND FIXING NEW DOOR FINSIHED IN LAMIANTE , PROVIDING AND FIXING VANITY COUNTER STORAGE FINISHED IN LAMINATE , PROVIDING AND FIXING DUCT PIPE COVERING FINISHED IN ACP SHEET , PROVIDING AND FIXING MIRROR , BLINDS FOR ALL AREAS , HARDWARE FITTINGS HANDLE_KNOBS_LOCKS_DOOR STOPPERS_AUTOCLOSER

Details: Supply Of Roof Mounted Ac Package Unit Rmpu Type-ii For Lhb Power Car, Con sisting Of Rmpu With R407-c Refrigerant -01 No. To The Rdso Specification No. Rdso/pe/spe c/ac/0061-2005 Rev-1 And Microprocessor Controller Unit- 01 No. To The Rdso specification No.rdso/pe/ Spec/ Ac/0139-2009 Rev.1, Type - I Complete With Accessories As Pe r Scope Of Supply As Envisaged In The Rdso Specifications And Without Air Bellows (suppl y Air, Fresh Air And Return Air). Note: 1. Rdso Drawing No Rdso/pe/sk/ac/0069-2004, Rev-3 O r Latest Shall Be Followed. 2. Standardisation Of Location Of Ntc, Ohp & Esti Sensors Sh all Be As Per Rdso Modification Sheet No Rdso/pe/ms/ac/0087 (rev-0)-2022. 3. Mounting Det ails For Rmpu Switch Panel Shall Be Provided As Per Drawing No.icf/sk3-7-2-062 Alt- A. 4. Dif ferential Pressure Switch (dps) Based Heater Protection System For Rmpu Shall Be Provided As Per Rds o Modification Sheet No. Rdso/pe/ms/ac/0089 (rev-0)-2022. 5. Packing Instruction As Per Pi-026 ver.1.0 [ Warranty Period: 30 Months After The Date Of Delivery ] ]

Details: Description :direct On Line Starter With 2 Sets Of 3 Pole / 4 Pole Contactors (2 Sets Ac Contactor Coils, 25 A mp Each), Each Set Controlled Separately By 415v. 50hz Ac Contactor Coils. One Set Of Contactor Coil Is To B e Controlled By The Forward Direction Of Rotation Through An Inching Type Push Button And The Other Set Thro ugh Another Inching Button To Control The Reverse Direction Of 7.5 Hp, 3phase, 50hz, 415volts, Ac Motor. Th ere Must Be Electrical Interlocking Contact To Prevent Both Set Of Contactors To Close Simultaneously. Each of Above Push Buttons Should Have One Normally Closed Auxiliary Contact And One Stop Push Buttons Are Re quired. The Starter Shall Be Complete With Over Load, Shall Be Wired And Shall Be Provided With Power Plug and Socket With Locking Arrangement As Shown In Schematic Drawing No. 1736/23 And 1737/23 Alt.-1. Each starter Is To Be Provided With 2 Nos. Power Plug And Sockets And 2 Nos. Of Control Plug And Sockets. Maxim um Dimension Of The Starter Should Not Excessed 280mm (b) X 360mm (l) X 162mm (t) Irrespective Of Di mension Given In Drawing. Material Specification: Is: 13947 Pt.-4 Sec.-1, 1993, Make: Bch Or Siemens Or H avells Or Jeevan Or Schneider Or L&t. [ Warranty Period: 30 Months After The Date Of Delivery ] ]

Details: One Coach Set Of Roof Assembly Complete For Amrit Bharat Lws Pp2.0 Shells To Drg No.75416001, Alt 'nil', Col-i -1 No, Along With Welding Pin Assembly To Drg No 58110037, Alt 'nil ' Col-i -1 No And End Roof Assembly To Drg No.97216008, Alt 'a' Col-i-2 Nos. The Firm Shall Fulfil The Re Quirement As Per Icf//md/specn. 200, Issue Status 01, Rev 04 With Amendment No 01 Special Con Dition : This Is A New Build And There Will Be Minor Changes In Drawing. Firm Shall Obtain F Inal Drawings From Icf Before Start Of Manufacturing. Packing As Per Drg. No. Icf/j&t/misc-2627 Alt 'b' Safety Instruction As Per Icf/j&t/sk-1867 Alt 'nil'.[safety Item] [ War Ranty Period: 30 Months After The Date Of Delivery ] [quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total Po Value Variation Permitted: Max 8 Lacs ] ] Consignee Shell Depot/icf,chennai, Icf Tamil Nadu 113.00 Set Uvam Item Ref. ( Item Id :- 2400026 - Set Of Side Wall Assembly, Lavatory Side Wall And Roof For Lhb Coaches , Sub Item Id:-2400026001 - Set Of Side Wall Assembly, Lavatory Side Wall And Roof For Lhb Coaches ) Inspection Details Stage Inspection Not Required

Details: Description:- Modification /alteration In Existing Electronic Interlocking (ei) System (medha) As Per latest Rdso Guidelines/tan At Adjacent Stations Of Lc Gates In Connection Closure Of Lc Gates No. 51 (spl) At Sitapur City Yard In Lieu Of Lhs/rob/rub. It Includes Design And Modification In Existing interface And Interlocking Circuits And Logic Of Ei System As Per Approved St Including Modification In thevdu(videodisplayunit)/lcp(localcontrolpanel)/ccip(controlcumindicationpanel). maiontenance Terminal, Data Logger, Relay Rack Wiring. The Complete Work Should Comply With The latest Rdso Specifiation And Guidelines And As Per Approved Sip And Circuit Diagrams. All The Material (interfacecards/relays/wiringmaterial/connectors/fuses/communiationsdevicesetc.)shallbe provided By The Contractor. The Work Also Includes The Supply Of Modified Selection Table, Interface circuits, Vdu/lcp/ccip Diagram Etc. To Suit The Modified Sip. It Also Includes The Carrying Out Of Fat, sat (as Applicable) Jointly With Railways And Satisfactory Commissioning. Inspection By Rdso For Ei related Supply. All Plans/drawings/circuits Etc. Should Be Prepared On Autocad, Softcopy To Be supplied On Pen Drive And 06 Sets Of Hard Copies Also To Be Supplied. (i) Supply Of 6 Copies Of completionsetofsuperiorqualitypaper,laminated,properlyboundinsteelclipjawfilewith cushioned Cover.(ii) Software Back Up Of Complete Set In The Form Of Cds. (iii) One Complete Set Of tracings.(iv) Design Through Cad(v) Drawings In A3 & Plans In Bigger Size. (six Sets). Inspection: sse/c/d&d.