Drawer Tenders

Description: Description :set Of Wheel Floating Equipment For Wap4 Locomotives Consist Of- (1) Axle Box Movement Restriction Pads, As Per Drawing no. B/trs/4/641 Ref 1 To 7 - Qty 1 Set, Consist 07 Numbers. (2) Axle Box Floating Support, As Per Drawing No. B/trs/4/642 - Qty- 01 Number, (3) bogie To Body Packing Items, As Per Drawing No. B/trs/4/643 Ref 1 To 4 - Qty- 1 Set, Consist 07 Number. (in One Set) [ Warranty Period: 30 Mon ths After The Date Of Delivery ] ]

Description: Construction Of Training Center Cum Conference Hall , P.h.e.d, Manipur (consisting Of Design, Drawing And Construction Of Electrical, Plumbing Civil Works, Complete.)

Description: Set Of Wind Screen Wipers Complete, One Set Consists Of Lh And Rh Assembly, To Rdso Specification C-k306 [rev-01] And Icf Drawing No. Icf/std-3-5-042 Alt-c, Pneumatically Operated With Auto Parking Facility And Handle For Manual Operation. Note:1] Fasteners To Be Provided Along With Supply And Shall Be Sourced From Tvs [or] Unbrako [or] Lps Only.the Firm Shall Submit Drawing And Type Test Report As Per Clause 6.2.2 Of C-k306 For Onetime Approval Before Placement Of Order. Firm Should Be Approved By Icf. (drawing & Specification Attached)

Description: Set Of Wind Screen Wipers Complete, One Set Consists Of Lh And Rh Assembly, To Rdso Specification C-k306 [rev-01] And Icf Drawing No. Icf/std-3-5-042 Alt-c, Pneumatically Operated With Auto Parking Facility And Handle For Manual Operation. Note:1] Fasteners To Be Provided Along With Supply And Shall Be Sourced From Tvs [or] Unbrako [or] Lps Only.the Firm Shall Submit Drawing And Type Test Report As Per Clause 6.2.2 Of C-k306 For Onetime Approval Before Placement Of Order. Firm Should Be Approved By Icf. (drawing & Specification Attached)

Description: Set Of Flange Gaskets For Mph & Radiator Pipe Lines Of Ac Electric Locos, Each Set Consists Of 12 Gaskets As Follows.. 1.gasket As Per Ref No. 1 Of S.c.rly Drawing No. A3/el/conv/3/2698,alt-c Qty/set-3 Nos. 2.gasket As Per Ref No. 2 Of S.c.rly Drawing No. A3/el/conv/3/2698, Alt-c Qty/set-3 Nos. 3.gasket As Per Ref No. 3 Of S.c.rly Drawing No. A3/el/conv/3/2698, Alt-c Qty/set-4 Nos. 4.gasket As Per Ref No. 4 Of S.c. Rly Drawing No A3/el/conv/3/2698, Alt-c Qty/set-2 Nos

Description: 1) Carriage Bolt And Nyloc Nut (5/16-18) As Per Drawing No- dsl/ubl/he/1222-4. For Bolt, Material Grade - Gm-280m Steel And For Nut, Material grade - Gm-284m Steel. 2) Carriage Bolt And Nyloc Nut (1/4-20) As Per drawing No-dsl/ubl/he/1222-3. For Bolt, Material Grade - Gm-280m Steel And For nut, Material Grade - Gm-284m Steel. 3) Round Head Square Neck Bolt As Per drawing No-dsl/ubl/he/1018-6. Material Grade - Gm-280m Steel. 4) Nylock Nut (3/8-16) As Per Drawing No-dsl/ubl/he/1222-2. Material Grade - Gm-284m Steel. sample To Be Approved By Consignee Prior To Bulk Supply.

Description: CATEGORY: cello tape transparent 50 mm width , Clutch pencil 0 pt 5 mm , Colour pencil sets of 12 pcs , Correction fluid pen , Drawing pencil 2 H , Drawing pencil B , Drawing pencil HB , Drawing sheet coloured size 56 x 72 cm , Drawing sheet super white size 56 x 72 cm , Drawing sheet plastic coated 56 x 72 cm , Pencil HB , Drawing paper snow white , Edge binding tape 2 pt 5 cm differenct colour , Fevi quick 05 gms , Glue stick , Graph sheet size 75 x 53 cm , Hi tech pen ink Blue black red and green , J K bond paper 100 sheets per pkts , Photo paper 8 inch x 12 inch , OHP marker parmanent pen , GBC opeque back cover all cover all colour FS size each pkts 100 sheets , Cold laminated sheet size 3 pt 5 inch x 5 inch for I card 100 sheets per pkts , J K bond paper FS 100 sheets per pkt , Rotaring pen blue and black , Sketch pen sets , Snap cutter big size , snap cutter blade big size , Snap cutter 6 inch small size , Snap cutter blade 6 inch small size , Stapler small size No 10 , Stapler pin No 10 , Magnifying lens detechable handle , CD Marker Pen , Drawing board clip brass top , Pencil sharpner big size , Tape dispencer 12 mm ob 25 mm ob 50 mm , CD RW , White board marker blue black red green

Description: Tungsten Carbide Tip Tamping Tools Set For New Mpt Machines, Consisting Of 16 Tools: I) Plasser Part No. Cu30.2743-fri - 04 Nos. (rdso Drawing No. Rdso/tm/01b/16). Ii) Plasser Part No. Cu30.6840-fri - 04 Nos. (rdso Drawing No. Rdso/tm/01a/16) Iii) Plasser Part No. Cu30.10840-fri - 08 Nos. (rdso Drawing No.-rdso/tm/15a/16) And Rdso Specification No. Tm/hm/6/320 (rev-3) With Latest Amendments Up To Date.

Description: Set Of Wire Rope Sling For Lifting Wag9hc /wap7 Bogie As Per Drawing No. Els/vskp/2018/25. Note : Load Test Certificate From Nabllab Or Other Authorised Agency To Be Submitted Along With Material . Make/brand: Asian Chain Industries/ Oeci /asahi /felix Or Equivalent. Quantity: (1) Effective Length 2500(set -1)-2 Sets. As Per Drawing One Set Contains Two Ropes Each Effective Length 2500mm. , (2)effective Length 2625 ( Set- 2) -2 Sets. As Per Drawing One Set Contains Two Ropes Each Effective Length 2625 Mm.

Description: 38105433 spigot, Size 48 X 25 X 25 Mm For Inner Spring Of Spring Plank. Drawing No : Wx-03025, I tem-3, Alt-nil. Material Spec: As Per Drawing. [ Warranty Period: 30 Months After The Date Of Deliver y ] ] consignee Njp Gsd, Nfr West Bengal 7200.00 Numbers inspection details Stage Inspection Not Required