Drawer Tenders

Details: Construction of 40 Bedded Mahila Barrack at Bn HQ Campus Rampura of Bn HQ 66 Bn BSF under SHQ BSF Abohar (Sh Consultancy services for complete soil investigation, Architectural & Structural design and plan, elevation & Sectional elevation mentioning full details, detailed calculation & Drawing as per latest I.S. Code (vetting from any Govt. college or University) and Detailed Estimate for Construction of 40 Bedded Mahila Barrack on basis of DSR 2023 & upto date correction slips and Market rate analysis. Submission of detailed estimate including Measurement sheet, Rate of Analysis as per latest DSR 2023 in 03 Copies (Soft & Hard)

Details: Description :set Of 03 Fasteners For Cattle Guard And Rail Guard Mounting: (1) Bolt Hex Head 3/4-10 X 2- 1/2 To Emd Part No. 271773 As Per Drg. No. 27177 3 Alt B Or Latest, Qty - 10 Nos. (2) Washer Flat 3/4 To Em D Part No. 131017 As Per Drg. No. 131017 Alt-a Or Latest, Qty - 6 Nos. (3) Nut Lock 3/4-10 To Emd Pa rt No. 9416541 As Per Drg. No. 9416541 Or Latest, Qty - 6 Nos. Drawing Attached [ Warranty Period: 30 Months After The Date Of Delivery ] ]

Details: Description :set Of Gasket For Intervehicular Coupler For 3-phase Locos Equipped With 500 Kva Hog Converter As Per Rdso/pe/spec /ac/01 77-2013 (rev. 01). Each Set Consists Of 02 Items In 03 Nos. 1) Foundation Rubber Gasket (sealstrip Rcf Drg No-lw71332) For Iv Coupler Sock et Assembly. Qty - 01 Nos. 2) Sealing Ring Gasket ( Rsdo Drawing No. Rdso/pe/sk/ac/0235-2021 Rev.-0 ) Of Coupler Body And Cover For Iv Co upler Socket Assembly Qty- 02 Nos. [ Warranty Period: 30 Months After The Date Of Delivery ] ]

Details: One Coach Set Of Pu Foam Cushion Material For Lscn/eog Coaches To Drg . Icf /sk3/6-1-097, Col-i , Alt -f . Cushioning Material Shall Be Of Pu Foam Conforming To Rdso Sp Ecification Rdso/2007/cg-04 Rev.01 Or Latest. Note: Firm Has The Option For Offering Seat S And Berths Cushion With Lower Density Conforming To Spec.rdso/2007/cg-04, Rev-01 Or Latest Also. Please Visit Icf Vendor Portal For Downloading Drawing Https://vp.icf.gov.in/vendtendor Detnew.php Using Key: 07241syfxkc3539 [ Warranty Period: 120 Months After The Date Of Delivery ] ]

Details: Endwall Door Complete., As Per Drawing: Lw56350 Alt I, Packing Instruction: Lhb doors (body Side Door And Saloon Sliding Door ) : Lhb Doors To Be Wrapped In Biodegra dable Bubble Sheet And To Be Packed In Wooden Box Made Of Planks Of Minimum 20mm Thi ck. The Wooden Boxes To Be Strengthened Along The Length At Four Places With Woode n Strips Of 40x100mm Suitable Length All Around The Box. A List Should Be Pasted On Ea ch Wooden Crate Showing Order No,pl No, Description Of Item,drg No/spec No/set List N o With Version,qty,firm's Name & Address,date Of Despatch Etc.

Details: Description :s No 89 Of Rsp 2023-24, Supply Of12.7 Mm Dia Lock Bolt With Collar With Required G rip Range 12.7 Mm To 19.05 Mm Conforming To Rdso Specn. No. Is/rdso-wd/ 0001: 2022. (one Set consisting Of 1 No. Lock Bolt & 1 No. Collar As Per Rdso Drg. Wd-11036-s-01, And Wd-11036-s-02 Alt. Mater ial & Specification As Per Drawing. The Head Of The Lock Bolts Necessarily Be Marked With Manufactures Ide ntification. The Marking On Collar Should Be Done On Lower Bottom Surface. ) [ Warranty Period: 30 Month s After The Date Of Delivery ] ]

Details: Set Of Crash Buffers For Vande Bharat Rake (crashworthy Design) Note:-fir m Shall Collect All Latest/final Specification/drawings Before Manufacturing. There M ay Be Minor Modification In Design., As Per Drawing: Mp24cbvb Version 0, Packing Instruction: set Of Side Buffer Assly. (helical Spring Type) (lh&rh) For Lhb Coach 1. The Packing Fixtu re/frame To Be Fabricated Having Sufficient Strength To Bear Approximate Weight Of Ei ght Nos. Of Side Buffer Assly. (helical Spring Type, Lh&rh). 2. The Supplier Shall Pack The set Of Side Buffer Assly. (helical Spring Type, Lh&rh) In Such A Way That This Set Should not Get Scratched, Damaged, Twisted During Transportation, Storage And Lifting. To Av oid Scratches On Outer Surface, It Should Be Wrapped With Environment Friendly Mater ial. 3. The Fixture/frame/pallet Should Be Designed So That The Packed Side Buffer Assly. (helical Spring Type, Lh&rh) Remains Preferably In Vertical Condition To Minimize Surfac e Area. 4. First Returnable Pallet Along With Set Of Side Buffer Assly. (helical Spring Typ e, Lh&rh) Will Be Retained By Rcf & This Pallet Shall Be Exchanged In The Next Lots Of Su pply. 5. It Should Be Suitable For Storage Of Side Buffer Assly. (helical Spring Type, Lh&r h) Under Open Sky. Firm's Identification Mark Should Be On The Packing Fixture/frame. Al ong With Complete Details Of Items I.e Description & Drg. No. And Plnos. ]

Details: Description:- Signallingexecutionsor(includinggst)-scopeofworkincludestrenching, transportation And Laying Of S&t Cable, Mechanised Drilling/ Micro Tunnelling Under Important/ Busy metal/concreteroad/railwaytrackandlayinggipipe,boringandpullingcable,supply, transportation And Fixing Of Galvanised Iron Pipe And Drawing Of Cables Inside The Pipe, Hiring Of jcb/hydra/poclainmachine(ingoodworkingcondition)forlevelling&dressingofground/ dismantlingstructures,erectionoffulllocationbox,alteration/modificationinexistinglocation boxes, Painting Of Location Box, Lettering / Numbering Termination Particulars, Equipments Names etc. Inside Location Box, Transportation, Installation Of Signal Post For Macls (2-aspect And 3/4 - aspect), Transportation, Installation And Painting With Retro Reflective Tape Of Slb/bslb/legend/stop board Etc., Painting Of Two Coats Of Synthetic Enamel Paint Over One Coat Of Primer On Main Signal post With Signal Units, Surface Base And Complete Fittings & Shunt Signal Post With Signal Unit, surface Base, Lettering / Numbering Termination Particulars, Equipments Names Etc On Signals/track lead Junction Box, Transportation, Installation And Charging Of Secondary Cell 2 V ( 2 Volt 80 Ah/ 2 volt 200 Ah/ 2 Volt 300 Ah), Transportation And Installation Of Electric Point Machine, Painting & lettering Of Point Machine With Ground Connections Complete And Point Junction Box, Painting & lettering Of Electric Lifting Barriers (elb), Installation Of Maintenance Free Earthing And Conventional earthing, Routing And Connecting All The Equipment In The Equipment/relay Room To Seeb With 10 Sq. mm Copper Cable, Provision Of Cement Concrete Enclosure For Earth Electrode, Provision Of Cement concrete Enclosure For Earth Electrode As Per Approved Drawing, Cement Concrete For Miscellaneous items.

Details: Description:- Supply, Installation, Testing And Commissioning Of 1000kva Package Type Substation comprising With11 Kv Ht Three-way Rmu (2ika.3sec)with 2 Nos. Load Breakswitch & 1 No Sf6 Vcb With ctr-5d/1a.cl-5p10.2.5 Va With Inbuilt Idmt Protection. 1000 Kva 11/433 Kv Dry Type Transformer withoffloadtaplink+5%to-10%instepsof2.5%completewithallaccessories.1600afp electrically Draw Out Type Acb 50 Ka O/l, S/c. Microprocessor Based. 800 A Fp Electrically Draw Out type Acb 50ka O/l.s/c. Microprocessor Based, 3x400a Tp Manually Fixed Type Mccb 36 Ka O/l ,s/c thermal Magnetic Based 3x250a Tp Manually Fixed Type Mccb 36 Ka O/l, S/c Thermal Magnetic based. Interconnection Between Ht Section. Transformer & Lt Section Through Ai Bus Bar & Copper cable. Css Enclosemade Out Of Gi Sheet Complete With Standard Fitting And Suitable For Outdoor installation With Our Innovative Complete With Exhaust Fan. Thermostat. Internal Illumination Door limits Witches Etc S O/l.s/c.e/f Protection, Complete With Indication Lamps With Protection Mcb With accessories Complete As Per Is/ie Rules And Site Requirement.

Details: Set Of Crash Buffers For Vande Bharat Rake (crashworthy Design) Note:-fir M Shall Collect All Latest/final Specification/drawings Before Manufacturing. There M Ay Be Minor Modification In Design., As Per Drawing: Mp24cbvb Version 0, Packing Instruction: Set Of Side Buffer Assly. (helical Spring Type) (lh&rh) For Lhb Coach 1. The Packing Fixtu Re/frame To Be Fabricated Having Sufficient Strength To Bear Approximate Weight Of Ei Ght Nos. Of Side Buffer Assly. (helical Spring Type, Lh&rh). 2. The Supplier Shall Pack The Set Of Side Buffer Assly. (helical Spring Type, Lh&rh) In Such A Way That This Set Should Not Get Scratched, Damaged, Twisted During Transportation, Storage And Lifting. To Av Oid Scratches On Outer Surface, It Should Be Wrapped With Environment Friendly Mater Ial. 3. The Fixture/frame/pallet Should Be Designed So That The Packed Side Buffer Assly. (helical Spring Type, Lh&rh) Remains Preferably In Vertical Condition To Minimize Surfac E Area. 4. First Returnable Pallet Along With Set Of Side Buffer Assly. (helical Spring Typ E, Lh&rh) Will Be Retained By Rcf & This Pallet Shall Be Exchanged In The Next Lots Of Su Pply. 5. It Should Be Suitable For Storage Of Side Buffer Assly. (helical Spring Type, Lh&r H) Under Open Sky. Firm's Identification Mark Should Be On The Packing Fixture/frame. Al Ong With Complete Details Of Items I.e Description & Drg. No. And Plnos. [ Warranty Perio D: 30 Months After The Date Of Delivery ] ]