Drawer Tenders

Details: Construction of Drill Shed cum Darbar Shed at BSF Campus of 55 Bn BSF under SHQ BSF Abohar (Sh Consultancy services for complete soil investigation, Architectural & Structural design and plan, elevation & Sectional elevation mentioning full details, detailed calculation & Drawing as per latest I.S. Code (vetting from any Govt. college or University) and Detailed Estimate for Construction of Drill shed cum Darbar Shed on basis of DSR 2023 & upto date correction slips and Market rate analysis. Submission of detailed estimate including Measurement sheet, Rate of Analysis as per latest DSR 2023 in 03 Copies (Soft & Hard)

Details: Construction of Drill Shed cum Darbar Shed at BSF Campus of 66 Bn BSF under SHQ BSF Abohar (Sh Consultancy services for complete soil investigation, Architectural & Structural design and plan, elevation & Sectional elevation mentioning full details, detailed calculation & Drawing as per latest I.S. Code (vetting from any Govt. college or University) and Detailed Estimate for Construction of Drill shed cum Darbar Shed on basis of DSR 2023 & upto date correction slips and Market rate analysis. Submission of detailed estimate including Measurement sheet, Rate of Analysis as per latest DSR 2023 in 03 Copies (Soft & Hard)

Details: Geo-Technical investingtion, Design (Sub-structure) & Construction of RCC Elevated Over Head Reservoir (Intze type) of capacity 950 cum of staging height 20 meter with pile foundation including pipe connection for head works, Guard Room with sanitary arrangement, Land Development, Approach Road, Boundary Wall with Gate & Masonry drain at premises as per Departmental design, drawing & specification etc. Including supply of all materials as required complete in all respect of proposed Water Supply Scheme under AMRUT 2.0 at Zone-VI in ward no. 10 within Chakdaha Municipality under Proposed Water Supply Scheme.

Details: Description:- Modification/alteration In Interface Circuit, Application Logic, Vdu Software And Wiring, installation, Testing (including Fat,sat) And Commissioning Of Existing Electronic Interlocking System (make: M/s Kyosan At Ks Station) For Elimination Of Interlocked Lc Gates In Lucknow Division Of northern Railway. This Includes All Related Wiring, Relays, Card And Any Other Accessories If Required for This Alteration And Modification Work Of Ei System. All Plans/drawings/circuits Etc. Should Be prepared On Autocad, Soft Copy To Be Supplied On Pen Drive And 06 Sets Of Hardcopies Also To Be supplied. Supply Of Ei Related Items If Any, Should Be Inspected By Rdso.

Details: Construction of 45 Suites SO’s Mess at C A Wala Campus of Bn HQ 160 Bn BSF under SHQ BSF Abohar (Sh Consultancy services for complete soil investigation, Architectural & Structural design and plan, elevation & Sectional elevation mentioning full details, detailed calculation & Drawing as per latest I.S. Code (vetting from any Govt. college or University) and Detailed Estimate for Construction of 45 Suites SO’s Mess on basis of DSR 2023 & upto date correction slips and Market rate analysis. Submission of detailed estimate including Measurement sheet, Rate of Analysis as per latest DSR 2023 in 03 Copies (Soft & Hard)

Details: Construction of 120 Men Jawan Barrack at Bn HQ Campus Fazilka of 52 Bn BSF under SHQ BSF Abohar (Sh Consultancy services for complete soil investigation, Architectural & Structural design and plan, elevation & Sectional elevation mentioning full details, detailed calculation & Drawing as per latest I.S. Code (vetting from any Govt. college or University) and Detailed Estimate for construction of 120 Men Barrack on basis of DSR 2023 & upto date correction slips and Market rate analysis. Submission of detailed estimate including Measurement sheet, Rate of Analysis as per latest DSR 2023 in 03 Copies (Soft & Hard)

Details: Description :set Of Cage Clamp Terminals For Doorway For Hybrid Non Ac Coaches., As Pe r Drawing: Cc72070,alt-'c' Of M/s Wago Or Phoenix Or Elmex Make Or Rcf Approved., Packing I nstruction: As Per Standard Packing. It Should Be Ensured That Item Should Not Rub Durin g Transportation. The Item Should Be Packed With Adequate Strength. Transit Damage , if Any , Shall Be At The Cost Of Supplier. [ Warranty Period: 30 Months After The Date Of Deliver y ] [quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total Po Value Variation Permitt ed: Max 8 Lacs ] ]

Details: Supply Of Roof Mounted Ac Package Unit Rmpu Type-ii For Lhb Power Car, Con sisting Of Rmpu With R407-c Refrigerant -01 No. To The Rdso Specification No. Rdso/pe/spe c/ac/0061-2005 Rev-1 And Microprocessor Controller Unit- 01 No. To The Rdso specification No.rdso/pe/ Spec/ Ac/0139-2009 Rev.1, Type - I Complete With Accessories As Pe r Scope Of Supply As Envisaged In The Rdso Specifications And Without Air Bellows (suppl y Air, Fresh Air And Return Air). Note: 1. Rdso Drawing No Rdso/pe/sk/ac/0069-2004, Rev-3 O r Latest Shall Be Followed. 2. Standardisation Of Location Of Ntc, Ohp & Esti Sensors Sh all Be As Per Rdso Modification Sheet No Rdso/pe/ms/ac/0087 (rev-0)-2022. 3. Mounting Det ails For Rmpu Switch Panel Shall Be Provided As Per Drawing No.icf/sk3-7-2-062 Alt- A. 4. Dif ferential Pressure Switch (dps) Based Heater Protection System For Rmpu Shall Be Provided As Per Rds o Modification Sheet No. Rdso/pe/ms/ac/0089 (rev-0)-2022. 5. Packing Instruction As Per Pi-026 ver.1.0 [ Warranty Period: 30 Months After The Date Of Delivery ] ]

Description: Cond. And U/s Melting Scrap Such As Cond. End Shield, Anchors, Connecting Rod, Elbow, Centre Pivot, Bss Hanger, Narrow Jaw Adapter, Screw Coupling, Tie Bar, Draw Bar Hook, Welding Test In Full/cut/single/fabricated Pieces, Push Rod, Lever, Cut Parts Of Cattle Guard, End Shield, Stator W/o Coil, Knuckle, Adapter, Axle Guide, Cut Brake Beam, Brake Wheel Lever, Side Pillar, Anti Falling Atd Rod, Pull Rod, Shaft, Toothed Segment, Tamping Tool, Racer, Portable Drilling Machine Chucks, Air Brake Components, Wagon/coach Cut Up Parts, Supporting Plate, Cbc Pin, Bogie Frame Cut Ups, Sleeves, Brake Head With/without Brake Block Attachments, Adjustable Pull Rod & Safety Chain, Slack Adjuster, Crow Bar, Adapter, Angle, Channel, Plate, Rod, Different Types Of Cocks, Pipe, Rings, Brake Anchor, Anchor Block, Buckle, Box, Pin, Rivet, Bolt, Back Bush, Anvil Smith, Pedal Switch & Base, Stay Plate, Inner & Outer Rings Of Bearing, Air Dryer, Connecting Rod, Brake Gear Components, Screw Coupling,spring Holder Plate Assembly, Crank Shaft Assembly, Cylinder Linear Centering Disc, Double Hook Chain, Chain Of Various Sorts And Sizes, Alternator End Shield, Modified Hanger, Weighing Machine Weights, Test Bar & Hardness Table, Parking Brake Link, Axle Box Inner Cover, Tension Rod, Tensioning Rod Gauge Plate, Pin Punches, Pinch Bar, Nut, Wide Jaw Adapter, Narrow Jaw Adapter, Top Housing, Door Chainless Cotter, Cc Pad, Control Rod, Fabricated Side, Cut Off Angle Cock And All Released M.s. Components Of Rolling Stock/carriage/wagon/loco. All The Above Items Are Of All Sorts, Shapes And Sizes In Full/broken/cut/dismantled In As Is Where Is Condition. Pl.no. 98050126. Custodian: Cdms-rsf-gsd-per. Location: Bin G Note: 1) During Delivery Any Major Non Ferrous Items Found The Same May Be Handed Over To Custodian.

Details: Construction of Bina Refinery Betwa Barrage Project on Betwa River having approximate minimum gross capacity of 42.94 MCM on turnkey basis with maximum total submergence of 647 Ha land (0 Ha Forest, 79.32 Ha Private land, 567.68 Ha Government land) comprising of preparation of Construction drawings & design, obtaining approval of all construction drawings & design from the competent authority including construction of all civil, mechanical and electrical works involved in the construction of Barrage for flood discharge 22890 Cumecs. The work includes survey of Head Work and Submergence with Fixing of Chainage cum Boundary Stone, geological investigations, hydrology approval, preparation and submission of complete Land Acquisition (LA) cases to competent authority for land acquisition of Barrage seat and submergence area and perusing LA cases for award, forest clearance, environmental clearance and all other clearances which are required for Barrage construction. Construction of permanent BT/WMM road for Barrage approaches to BPCL Bina refinery Factory and Malhargadh Road respectively , Construction of Concrete Overflow block, drilling grouting, Non-over flow blocks including RCC T beam Deck slab bridge with minimum 6.6 meter width, Energy Dissipation arrangement, earthen dam , river training and construction of coffer dam, environmental sluice including design, drawing and erection of Vertical gates with hoisting arrangements, automatic lifting beam, Electrically operated hoist with foot bridge and 2 no. set Stop log arrangements, Mono rail arrangement including all related components and hoist supporting structures including painting with primer and anti-corrosive treatment as per Latest relevant IS CODE and departmental circulars for all component of Barrage structure involved in construction including model study of the project Construction, Planning & Design of control room and chaukidar quarter Building , all lighting and maintenance of all components, including dam break analysis, Emergency action plan(EAP) preparation, gate operation & O/M manual, instrumentation in dam including RTDAS (Real time Data Acquisition System),AWS,ARS,AWLR etc. for monitoring and any other work as directed by the Engineer-in-Charge as per details given in scope of work with removal of defect in defect liability period for 60 months after completion of the project.