Drawer Tenders

Description: CATEGORY: Earth work in excavation by mechanical means Hydraulic excavator oblique manual means in foundation trenches or drains not exceeding 1 dot 5 m in width or 10 sqm on plan , Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering , Providing and laying in position specified grade of reinforced cement concrete , Brick work with burnt clay FPS non modular bricks of class designation 7 dot 5 in foundation and plinth in ratio Cement mortar 1 ratio 4 bracket 1 cement ratio 4 coarse sand , 12mm thick cement plaster 1ratio4 , Filling available excavated earth excluding rock in trenches plinth sides of foundations , Supplying and filling in plinth with Jamuna sand under floors including watering ramming consolidating and dressing complete , Steel reinforcement for RCC work including straightening cutting bending placing in position and binding all complete upto plinth level Thermo Mechanically Treated bars , Supplying of M S Bolts round holding down of Anchor boltds with nuts and washer plates complete , Structural steel work , Providing and fixing MS Chequered plate 5mm thick , Providing and fixing 0dot8mm thick colour coated sheet for shed , Designing Providing and fixing FRP 3D panel with minimum 6 mm thickness at center and 10 mm at flanges , PROVIDING AND FIXING SS Top Belay Bar , MOVABLE CLIMBING HOLDS , Providing Seat Harness , STATIC ROPE 10 MM , CARABINER , Providing bracket FdotOdot8 bracket , Providing MITTON , Gri Gri , Providing Quick Draw , 30mm Manila Rope

Description: Associated Component Of Machined Stator Assembly (11 Items) For Tm Type 6fra 6068, Specn/drg No:- As Per Clw Spec.-4tms.096.068, Rev-2 Alt.-1 With Latest, Str: Rdso/2007/el/str/0021 Rev-1 With Latest (full Specification And Drawing Is Attached With Annexure')

Description: CATEGORY: FILE COVER AS PER BUYER REQUIRMENT , FILE CLIP , STAMP PAD BIG , PLASTIC SCALE , STEEL SCALE , CD MARKET , STAMP PAD SMALL , TAG BIG , TAG SMALL , CELLO TAPE KHAKI BIG SIZE , REFILE REYNOLD BLUE RED , SUTTI ROLL , ERASER , SHARPNER , PILOT PEN V5 BLUE , STAPLER PIN SMALL , STAPLER PIN BIG , PEN BOX 20 , GLOSSY PAPER , U CLIP , REYNOLD PEN RED , REYNOLD PEN BLUE , DRAWING SHEET , WHITE BOARD MARKER PEN THREE COLOUR , GUM BOTTLE BIG SIZE , COLOUR FLAG , THUMB SPONG , ALPIN , PENCIL NATRAJ , ENVELEPE , CALCULATOR BIG SIZE , LUXER PEN , USE AND THROUGH PEN , DAK FOLDER AS PER BUYER REQUIRMENT , A4 SIZE PAPER TREDENT JK

Description: CATEGORY: Nails 2 inch , Nails 3 inch , Nails 6 inch , Sand Paper All types , Female Thread and Cap 1 2inch and 3 4 inch , Male Thread and Cap 1 2 inch and 3 4 inch , Self Screw 1 inch , Self Screw 1 5 inch , Self Screw 2 inch , Self Screw 2 5 inch , Welding Cable 25mm , M Seal , Circular Blade for Wood Cutting 4 inch , Wire Brush 4 inch , TST Saw Blade for Wood , Cutting Disc 5 inch , Cutting Disc 4 inch , Cutting Disc 8 inch , Grinding Disc 4 inch , Grinding Disc 5 inch , Wall Pludge 1 1 2 inch , Shoes Nails , Hand Stitching Needle Small and Big , Shoes Stitching Needle , Plywood 12mm 8X4 , Drawing Sheet Green , Drawing Sheet Pink , Drawing Sheet Red , Drawing Sheet White , Drawing Sheet Yellow , Fevicol 200 Ml , Fevicol 500 MI , Notepad , Paper Flags Coloured , Paper FS , Pencil , Photo Paper , Transparent Tape 1 inch width , Transparent Tape 1 2 inch width , White Board Marker Black and White , Pencil Cell , Talc Sheet , Pen Pilot V5 Green and Red , Pen Pilot V7 Green and Red , Transparent Tape 2 inch , Pen Pilot V5 Blue , Pen Pilot V7 Blue , Pen Reynold All Colour , Refill Reynold All Colour , Pen Highlighter Yellow Green Pink , Acrylic Colour , Stick Pads , Paper Pin , Push Pin Board , File Normal , File White UN Logo , Epson L 3250 Printer Cartridge Eco Tank Colour

Description: Supply, Demonstration And Training Of Air Drive Kit As Per Drawing No. sp02gm0044 Alt-nil For Crank Over Tool Of Hhp Locomotives. (detailed specification -1/2 Inch Squre Drive Engine Turning Angle Cranking Tool with A Precision Shutoff Clutch With Lever Start Actuation. Free Speed- 300 Rpm, Torque Range-0 To 111.5 Nm (0 To 68 Ft.lb.), Angle Head Side To centre-24.6 Mm, Approx. Length-455 Mm And Approx. Weight-3 To 5 Kg. features:-durable With A Precision Shutoff Clutch, Lube-free Air Motor, easy To Maintain, Convenient Push Botton Reverse, Torque Control through Pressure Regulation Or Operator Control, Recommended For soft Pull Applications Not Requiring Critical Torque Control). Suitable for Crank Over Tool Drawing No. Sp02gm0043 For Hhp Locomotive.

Description: CATEGORY: Custom Bid for Services - Service code 1046520 Charges towards the preparation of BOQ incl construction cost estimate as per scope and BOQ Lump sum price for qty of 70 nos including GST to be quoted , Custom Bid for Services - Service code 1046521 Charges towards initial site visits upto 3 site visits as per scope and BOQ Lump sum price for qty of 360 nos including GST to be quoted , Custom Bid for Services - Service code 1046522 Project Management Consultancy services for the construction of COCO CODO CFS as per scope and BOQ Lump sum price for qty of 70 nos including GST to be quoted , Custom Bid for Services - Service code 1046523 Project Management Consultancy services for the construction of DODO type Retail Outlets as per scope and BOQ Lump sum price for qty of 50 nos including GST to be quoted , Custom Bid for Services - Service code 1046525 Charges towards total station survey of the site per site upto 2025 SQM area as per scope and BOQ Lump sum price for qty of 5 nos including GST to be quoted , Custom Bid for Services - Service code 1033360 Charges towards ascertaining Safe Bearing Capacity SBC per pit as per scope and BOQ Lump sum price for qty of 360 nos including GST to be quoted , Custom Bid for Services - Service code 1033361 Charges towards ascertaining California Bearing Ratio CBR per sample as per scope and BOQ Lump sum price for qty of 120 nos including GST to be quoted , Custom Bid for Services - Service code 1033362 Charges towards conducting Procter density test PDT Per sample as per scope and BOQ Lump sum price for qty of 120 nos including GST to be quoted , Custom Bid for Services - Service code 1033363 Charges towards conducting Field Density Test FDT Per Sample as per scope and BOQ Lump sum price for qty of 240 nos including GST to be quoted , Custom Bid for Services - Service code 1038206 Charges towards Design & issuing construction drawings of each sales building as per scope and BOQ Lump sum price for qty of 5 nos including GST to be quoted , Custom Bid for Services - Service code 1046524 Charges towards engaging PESO competent inspector for obtaining certificates as per scope and BOQ Lump sum price for qty of 120 nos including GST to be quoted , Custom Bid for Services - Service code 1052309 Charges toward Auger boring test (per RO Mobilization & demobilization of necessary men and equipments as per scope and BOQ Lump sum price for qty of 120 nos including GST to be quoted

Description: 25970033 axle Box Assly. Complete With Roller Bearing For Wam4/wag5 Loco As Per Rdsos Drg. no. Sk.vl-603 [alt.- 07] To Specn. No. Mp-0.3600-01. Rev.01, Nov- 2020 [ Warranty Period: 30 Mont hs After The Date Of Delivery ] [quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total Po Value Variation Permitt ed: Max 8 Lacs ] ] consignee Dy Cmm/d/kanchrapara, Er West Bengal 12.00 Set uvam Item Ref. ( Item Id :- 2201266 - Item 1 To 7: Journal Axle Box Assembly With Normal* and Step Size** Roller Bearing And Conical Thrust Pad. (refer S. No. 1 & 2 Of drawing No. Sk.vl-603 (alt. 07); Specification No. Mp-0.3600-01, Nov.-1981, str No. Mp.str.bd. 01.02.03, Rev. 0, Sept.03) And Conical Thrust Pad (refer drawing No. Sk.dl-2308 (alt.01), Sk.dl-2309 (alt. Nil); Specification No. Irs R- 63-76). , Sub Item Id:-2201266006 - Axle Box Assembly Complete Kit With bearing Components For Wag7 Loco (01 Loco Kit Consists Of 12 Axle Box For 01 loco I.e, 08 For End Axle And 04 For Middle Axle). ) inspection stage Inspection Not Required details

Description: Auxiliary Reservoir Supporting Bracket As Per Rdso Drawing No.-wd-80007- S-16 Alt-13. Item No.-02.material And Specification As Per Drawing.

Description: 33690091 pillar, As Per Drawing: Lw14110 Alt. 'f', Packing Instruction: No Special Packing Re quired. The Protruding, Threaded Portion, Gauges And Loose Items Etc. If Any Are To Be protected With Suitable Covering To Prevent It From Damage. However Transit Damage I f Any Shall Be At The Cost Of Supplier., Proction Procedure: Na, Quality Plan: Na [ Warranty period: 30 Months After The Date Of Delivery ] ] consignee Shell Depot, Rcf Punjab 4098.00 Numbers inspection stage Inspection Not Required details

Description: CATEGORY: EXTENSION ASSEMBLY DRAWING TO DRG. NO. 188.70. 091CBCB