Drawer Tenders

Details: 33551996 shell Kit Items For Lws (752) Coaches A) One Coach Set Of Roof, 2 Mm Sidewall And En d Wall 1)roof Assembly To Drg No 75216001, Alt 'nil' - 1 No. 2)end Roof Assembly To Drg No 58116066, alt 'g' - 2 Nos. 3)sidewall To Drg No 75214001, Alt 'nil' - 1 No. Welding Pin To Be Assembled As Per Drg no 58110037 (with Latest Sub Drawing 49516008 Alt 'a)' 4)end Wall To Drg No 74115001, Alt 'd' - 2 Nos . The Firm Shall Fulfil The Requirement As Per Icf//md/specn.200, Issue Status 01, Rev 04 With Amen dment No. 01. B) Partition Frames And Body Shell Items. 1) 75210012, Alt 'nil' - 1 No. 2) 752100 02, Alt 'nil' - 1 No. 3) 58210036, Alt 'a' - 2 Nos. 4) 75210003, Alt 'nil' - 1 No. 5) 67010011, Alt 'a' - 2 Nos . 6) Aaa10488, Alt 'c' - 6 Nos. 7) 58110017, Alt 'b' - 2 Nos. 8) 58110015, Alt 'a' - 6 Nos. 9) 58110016, Al t 'a' - 3 Nos. 10)aab10338, Alt 'nil' - 16 Nos. C) Under Frame Complete To Drg.no.67011001, Alt 'l' - 1 No. The Manufacturing Facility As Per Icf/md/spec-147, Issue Status-01 Rev.02 With Amen dment No.01 Special Condition : Packing For Roof And Side Wall As Per Schedule A- (to Be Deli vered To Shell) Complete Roof And Sidewall To Be Supplied With Welding Pins Welded To Ro of Assembly As Per Drawing. Schedule B- (to Be Delivered To Fur) Cap To Drg No 49516008002 alt 'a' And Serrated Spring Washer To Drg No 49516008003 Alt 'a' Of Required Quantity As Per Dra wing Are To Be Packed In Suitable Polythene Bags Of 100 Microns Thickness With Printed Label With Com plete Details Kept Inside The Polythene Bags. (complete Details: 1. Item Description, 2. Qty In The Pac king, 3. Date Of Packing, 4. Po No., 5. Type Of Coach, 6. Vendors Name & Address) "polythene Bags to Be Sealed Properly To Prevent Moisture And Water Entry". A0 I) Packing For Roof And side Wall As Per Icf/j&t/misc-2201, Alt 'e' Safety Instruction As Per Icf/j&t/sk-1867, Alt 'nil' I i) Sl.no 16#b Of Note To Drawing No 582-1-6-002 Alt 'j' To Be Strictly Followed. Packing For End Wall as Per Drg.icf/j&t/sk-1809, Alt'a' Packing For Body Shell Items & Partition Frames.icf/j&t/sk -1865, Alt "nil" Packing Condition For Underframe As Per Icf/j&t/misc/2487, Alt 'b' The Under frame Should Be Supplied As Normal Side Up And Side Bearer Side Down. All The Items Are to Be Supplied In Coach Sets. [safety Item] [ Warranty Period: 30 Months After The Date Of Deliv ery ] [quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total Po Value Variation permitted: Max 8 Lacs ] ] consignee Shell Depot/icf,chennai, Icf Tamil Nadu 212.00 Set inspection details Stage Inspection Not Required

Details: Description:- Design,manufacture,supply(atsite)of20metrehighmastsystemofhottip galvanized Complete With Head Frame Assembly, Lantern Carriage, Double Drum Winch, Stainless Steel wire Rope, Suitable Control Panel, Timer Switch, Twin Dome Aviation Obstructing Fittings Suitable For high Mast Including Lamps, Electrical Cable, 9 Nos Of 220w High Efficient Led Flood Light Fittings Etc, and Other Standard Accessories Lighting Finial And Winch Gear Box For Simultaneous & Reversible operation Double Drum Winch As Per Specification Enclosed Including Integrated Power Tool With reversibleelectricmotorandfoundationboltsmanufacturesfromspecialsteelalongwithnuts, washers Of Suitable Size Of Anchor Plate And Template And Erection, Testing And Commissioning Of The above High Mast As Per Specification And Drawing Enclosed On The Rcc Foundation By Using Modern engineering Practice By Crane/derrick System Complete In A Manner As Directed By Section Engineer in Charge At Site. Note: 200w Flood Light Fittings Accessories Shall Be As Per Plw Specification

Details: Self-priming Mono Block Pump Assembly With Controller To Rcf Specification No.edts-18 6, Rev.a, Am-l & 2, Corr.1 With Icf Drg, No. Icf/sk3-7-1-089 (latest). The Drg. No. Cc71325, Alt''c'' For P Ump Mounting Frame Where Ever Mentioned In The Specification/ Drawing Shall Be Read As Icf/sk3-7-1- 089 (latest). Note : The Mounting Frame To Drg. No.icf/sk3-7-1-089 (latest) Material Shall Be Conformi Ng To Ss-304 And Shall Be Powder Coated To Specn. Icf/md/spec-091 With Minimum Thickness Of 50 Mi Crons Of Colour Black Pure Epoxy Matt Finish To Shade Card No. Ral9004 (signal Black). Packing Instructi On Pi 146 ,ver 2.0. [ Warranty Period: 30 Months After The Date Of Delivery ] ]

Details: Description :supply And Installation Of 1 No Of Minimum 10gm Aerosol Based Fire Detection A nd Suppression System For Low Onboard Panel Of Lhb Eog/hog Type Non Ac Type Coaches, In L ine With Technical Parameters As Per Annexure-g1 Of Rdso Specn. No. Rdso/pe/spec/ac/0192 20 18(rev.1) Or Latest. Approved Makes As Per Rdso Specification No. Rdso/pe/spec/ac/0184-2015(r ev.01) And Rdso Letter No. El/7.1.108/ms/sbc Date 17.09.21. The Layout Drawing No. Cc72081 De mercatting Fitment For Same The Same Is Enclosed. All Necessary Modification, Clamping Arr angement And Accessories Required For Installation Of This Item Shall Be With The Scope Of this Supplier. Oem And Their Authorized Dealers Shall Only Be Considered. [ Warranty Period: 120 Months After The Date Of Delivery ] ]

Details: Provn Of External Services At Certain Places At Af Stn Nagpur (ph-i)- Construction Of Block Of Pump House Complete All As Specified And As Shown In Drawings, M&l For Laying And Compacting 250 Mm Thick (compacted Thickness) Granular Sub Base Course (gsb) Grading As Per Grade Ii As Specified Table 400-1 Of Marth Specifications For Road And Bridge Works, 2013, In Two Layers Of Each 125mm Over Compacted Subgrade With Natural Sand, Crushed Gravel, Crushed Stone, Crushed Slag Or Combination Thereof As Per The Grading Required The Materials Are Mechanically Mixed, Spread And Leveling On The Subgrade By Using Motor Grader Of Adequate Capacity, And Rolling With Vibratory Roller Of Capacity 80-100 Kn Static Weight For Achieving Required Compaction Density Of Atleast 98% Of The Maximum Dry Density. Consolidating To Required Gradient And Camber Complete All As Specified And Directed With Finished Surface Tolerances As Per Table 900-1 Of Morth Specifications For Road And Bridge Works, 2013. Complete All As Specified & Directed.

Details: Description:- Supplyandfabrication Of Any Steel Bridge Members For Repairing/strengthening Or modification Of Bridge Girders By Providing Plate Etc Or Any Other Steel Member For Provision Of inspectionfacilitiessuchasplatformetcmadeupofmsplate,angle,channelsofdifferent dimensions Including Painting With One Coat Of Ready Mixed Zinc Chromate Conforming To Is: 104 followed By One Coat Of Ready Mixed Zinc Chromate Red Oxide Conforming To Is: 2074 On The Contact surface Of New Members And One Thick Coat Of Ready Mixed Zinc Chromate On The Contact Surface Of existing Members. All Ms Section Shoud Confrm To Is: 2062 E 250b0 . Fabrication To Be Done As Per existing Or As Per Approved Drawing Or As Per Instruction Of Engineer In Charge. The Rate Shall Include supply And Cutting Of New Steel Section, Drilling For Rivetting/bolting, Assembling/fixing Of Members initially By Service Bolts & Nuts And Finally By Rivetting/hsfg Bolts & Nuts With Dti Washer Etc Or By welding Or As Directed By Engg. In Charge With All Tools, Plants, Labour, Consumables, Machineries And accessories Etc. The Work Will Be Executed As Per Irs: B1-2001 And Irbm With Latest Corrigendum.

Details: Design (only sub-structure i.e. foundation part after soil investigation) & Construction of RCC Elevated Over Head Reservoir (Intze type) of capacity 850 cum of staging height 20 meter with pile foundation including pipe connection for head works, Guard Room with sanitary arrangement, Land Development, Approach Road, Boundary Wall with Gate & Masonry drain, Internal electrification & yard lighting at premises as per Departmental design (Super-structure of OHR with other ancillary works), drawing & specification etc. Including supply of all materials as required in ward no. 06 & Supplying & Laying of distribution pipeline with different diameter D.I. (K-7) Pipes, HDPE Pipes & M.S. Pipes including all D.I. and HDPE Specials, Valves, Valve chambers including filling, Cleaning, Disinfection, Hydraulic pressure testing, temporary road restoration for vehicular movement etc. complete in all respect complete in all respect of proposed Water Supply Scheme under AMRUT 2.0 at Zone-II, Baduria Municipality under Proposed Water Supply Scheme.

Details: Design (only sub-structure i.e. foundation part after soil investigation) & Construction of RCC Elevated Over Head Reservoir (Intze type) of capacity 850 cum of staging height 20 meter with pile foundation including pipe connection for head works, Guard Room with sanitary arrangement, Land Development, Approach Road, Boundary Wall with Gate & Masonry drain, Internal electrification & yard lighting at premises as per Departmental design (Super-structure of OHR with other ancillary works), drawing & specification etc. Including supply of all materials as required in ward no. 09 & Supplying & Laying of distribution pipeline with different diameter D.I. (K-7) Pipes, HDPE Pipes & M.S. Pipes including all D.I. and HDPE Specials, Valves, Valve chambers including filling, Cleaning, Disinfection, Hydraulic pressure testing, temporary road restoration for vehicular movement etc. complete in all respect complete in all respect of proposed Water Supply Scheme under AMRUT 2.0 at Zone-III, Baduria Municipality under Proposed Water Supply Scheme

Details: Design (only sub-structure i.e. foundation part after soil investigation) & Construction of RCC Elevated Over Head Reservoir (Intze type) of capacity 1000 cum of staging height 20 meter with pile foundation including pipe connection for head works, Guard Room with sanitary arrangement, Land Development, Approach Road, Boundary Wall with Gate & Masonry drain, Internal electrification & yard lighting at premises as per Departmental design (Super-structure of OHR with other ancillary works), drawing & specification etc. Including supply of all materials as required in ward no. 14 & Supplying & Laying of distribution pipeline with different diameter D.I. (K-7) Pipes, HDPE Pipes & M.S. Pipes including all D.I. and HDPE Specials, Valves, Valve chambers including filling, Cleaning, Disinfection, Hydraulic pressure testing, temporary road restoration for vehicular movement etc. complete in all respect complete in all respect of proposed Water Supply Scheme under AMRUT 2.0 at Zone-IV, Baduria Municipality under Proposed Water Supply Scheme.

Details: Design (only sub-structure i.e. foundation part after soil investigation) & Construction of RCC Elevated Over Head Reservoir (Intze type) of capacity 800 cum of staging height 20 meter with pile foundation including pipe connection for head works, Guard Room with sanitary arrangement, Land Development, Approach Road, Boundary Wall with Gate & Masonry drain, Internal electrification & yard lighting at premises as per Departmental design (Super-structure of OHR with other ancillary works), drawing & specification etc. Including supply of all materials as required in ward no. 04 & Supplying & Laying of distribution pipeline with different diameter D.I. (K-7) Pipes, HDPE Pipes & M.S. Pipes including all D.I. and HDPE Specials, Valves, Valve chambers including filling, Cleaning, Disinfection, Hydraulic pressure testing, temporary road restoration for vehicular movement etc. complete in all respect complete in all respect of proposed Water Supply Scheme under AMRUT 2.0 at Zone-V, Baduria Municipality under Proposed Water Supply Scheme.