Dg Set Tenders

Details: Supply, Installation including Civil work and commissioning of 100KVA DG Set against Tender No. 11/2025

Description: CATEGORY: Repair and Overhauling Service - REPAIR OF 6KVA MLT DG SET; REPAIR OF 6KVA MLT DG SET; Yes; Buyer Premises

Description: CATEGORY: CMC of 5 Nos Cummins HT DGs and Spares and Consumables , CMC of 2 Nos Cummins Fire Engines and Spares and Consumables as per scope of work , Recommissioning of Automation Software for 5 Nos Cummins HT DG Sets as per scope of work , CMC of HT Panels, NGR Panels, C and R Panels, PLC SCADA System for 5 Nos HT DGs , one time rectification of 1x2250 KVA Cummins make HT DG set

Description: Providing Consultancy Services To Study And Designing The Power Distribution Scheme, Preparation Of Drawings For Extension Of Permanent Power Supply To The Proposed Ytps Township From Ytps Chp 11kv Boards, Arranging Of Street Lighting System And Providing Diesel Generator(dg) Sets For Extending Alternate Power Supply At Various Locations In Ytps Colony Township Including Residential And Non Residential Complexes And Preparation Of Detailed Estimate,tender Specification To Fix Up An Agency On Tendering Basis.vetting Of Vendor Drawings/documents During The Execution Of The Subject Work At Ytps(5x800mw), Veerlapalem(v),damercherla(m),nalgonda(dist)

Description: CATEGORY: Operation and Maintenance Services of Power Generator(DG-Set) - Package 2 - O&M Service with operational and semi comprehensive maintenance; 3; Upto 500 hours

Description: Scrap/condemned 02 Nos Dg Set, 1) Cap-1750 Kw, Alternator Type: D1db1401/6d, M/c No.-dg 02 Alternator No.-808256, Engine No-1.2007.11dg06. 2) Cap-1750 Kw, Alternator Type:d1db150/140h1/6,m/c No.-dg 03 Alternator No.-8509940, Engine No-1.2007.02.1167. Both Make-engine: Dlw, Varanasi, Alternator: M/s Avk, West Germany. Cutting/dismantling May Be Allowed If Required. Lot Is Formed As Is Where As Basis. Purchasers Are Advised To Inspect The Lot Before Bidding.

Description: CATEGORY: Attending fault at TE below 25 KM , Attending fault at TE 25 to 50 KM , Attending fault at TE more than 50 KM , Sf 12V 88Ah Battery , Sf 12V 130Ah Battery , Sf 10Amp 12V SMPS Battery charger , Repair SMPS Battery charger , Service of DG set 40 to 62.5KVA , Service of DG set 100 to 125KVA , Service of DG set 320 KVA , 320 KVADG set starter repair , Calibration of fuel pump and nozzle , Service radiator for EA set upto 125 KVA , Service radiator for EA set upto 160 TO 320 KVA , Rewinding 3 to 5 HP Mono water Pump , DOL starter for 5 HP Motor , Repalce Sreet light with 25 Watts LED lamp in Holder , Repalce Sreet light with 25 Watts LED lamp on pole , Repalce PVC Box , Sf 4 ft 20 W white LED TL , Sf 3 C 2.5 Sq mm Cu Cond cable , Sf 3 C 1.5 Sq mm Cu Cond cable , Laying XLPE cable upto 35 sq mm , End Termination for 4C 10 sq mm cable , Dismental AC unit incl all , shifting of 1.5 TR SAC unit incl all , ITC of 1.5 or 2 TR Split AC Units , Charging R 32 or R410 gas for SAC , Charging R 407 gas for SAC , Sf Add Copper pipe with cable for SAC , Sf25 mm PVC ISI Drain pipe , Disemntaling all EMS , Servicing MV and LT panels incl all , Repalce 400 A MCCB INCL Shift and itc

Description: CATEGORY: Power Generator - DG Set (up to 900 KVA) (Q2)

Description: Providing Two Numbers Of 250kva Dg Set To The Newly Constructed Yathri Nivas Building At Madurai.

Details: CATEGORY: Design, manufacturing, supply of DG Set of 500 KVA rating for site conditions as per annexure 1 , Supply of Emergency Switch Board as per Annexure - 2 , Supply of Lighting Distribution Board and Power Distribution Board as per Annexure - 3. , Supply and Installation of LED Lights , Supply of Structural Steel - MS Equal Angles, ISA 50 x 6mm , MS Plate-3.15 mm of either TATA Steel, Jindal Steel, RINL, SAIL make only. Supply of GI pipes etc , Charges towards Installation and Commissioning of DG Set as per the scope of work attached. , Supply and installation of auto changeover switch as per the scope of work attached herewith. , Fabrication of structural steel along with painting the structures as per scope of work , Shifting of cables from Central Stores and laying of cables over cable trays and binding the cables on the cable trays with cable tie as per scope of work , Shifting of AMF Panels, ESB,LDB and PDB panels and its accessories as per the scope of work