Crane Tenders

Description: Descr.: Condemned And Unserviceable Bg Alco Loco No.wdm3d 11222 With Available Items [refer Enclosure For The Material Composition].location-diesel Loco Shed/erode, Custodian-sse/dsl/ed.re-claimable Items [1] Wheel Set Complete [axle, Wheel Disc, Bull Gear, Rsp Tube, Axle Boxes With Bearings]-6 Sets. S.1539 No.636457 Dt.28.12.2024.note-[1] Delivery To Be Made On As Is Where Is And Lot Basis.[2]the Location Indicated Is Only Tentative. Railway Reserves The Right To Change The Location Of Sold Loco, Based On The Availability Of Track, Cutting And Loading Space And Other Administrative Reason, As Deemed Fit By The Auction Conducting Officer.[3]gas/chisel Cutting Is Permitted Only To Sizes That Are Loadable With A Crane, Only After Ensuring Sufficient Safety Measures Against Fire Hazards Etc. To Avoid Any Mishap To Any Person, Railway Material Etc. And The Same Should Be Ensured By The Witnessing Officials.[4]in Case Purchasers Require Usage Of Any Railway Assets/materials Such As Electricity/ Forklift Truck Etc. During The Process Of Delivery, They Are Required To Pay, The Prescribed Amount To Railways, As Directed By The Respective Custodian Of The Lot. Special Condition-[1] Reclaimable Item As Said Above In Description Of The Lot, Should Be Returned To The Custodian Before Commencing Delivery.[2] In Order To Make The Assessment, The Purchaser May Visit The Locos Offered For Condemnation And The Site Conditions Before Quoting The Offer.[3]the Purchaser Has To Make His Own Arrangements Such As Tools, Lifting Tackles, Lifting Equipment, Gas Cutting Equipment.[4]the Weight And Quantities Were Taken Into Consideration As Advised By The Custodian [5]the Purchaser May Note That Some Of The Reclaimable Items Of Locos Are To Be Stripped Instead Of Gas Cutting To Avoid Damage To Rc Items And The Purchaser Should Make Such Arrangements.[6]the Purchaser Is Strictly Instructed To Transport/stack All The Reclaimable Items At One Location Well Away From The Cut Off Parts Of The Locos As Directed By The Custodian. [7]the Purchaser Will Be Held Responsible For Any Damage/fire Accident Caused To The Railway Property.[8] Railway Is Not Responsible For Any Shortage.[9] After Completion Of Delivery Purchaser Has To Keep The Cutting And Loading Spot Neat And Clean, Free Of Any Left Over Loco Scrap.[10]railways Does Not Guarantee For Quality, Quantity Description Etc.[11] Delivery Should Commence Immediately After Cutting Without Any Delay.[12]the Courts In Chennai Alone Shall Have Exclusive Jurisdiction In The Matters/disputes Arising Out Of The Contract/arbitration/conciliation Proceedings And The Place Of Arbitration/conciliation, If Any, Shall Be In Chennai Only. [13] Bsv Partly Paid Along With Emd Will Be Forfeited, If Full Payment Is Not Received In Stipulated Time, With Interest If Any Applicable. [14] Part Delivery Is Not Permitted Against Part Payment.[15]if Any Hsd Oil/lube Oil Available In Fuel Tank/oil Sump Of The Said Locos, The Same May Be Returned To The Custodian. (location: Diesel Loco Shed/erode)

Description: Descr.: Condemned And Unserviceable Bg Alco Loco No.wdm3d 11152 With Available Items [refer Enclosure For The Material Composition].location-diesel Loco Shed/erode, Custodian-sse/dsl/ed.re-claimable Items [1] Wheel Set Complete [axle, Wheel Disc, Bull Gear, Rsp Tube, Axle Boxes With Bearings]-6 Sets. S.1539 No.636453 Dt.28.12.2024.note-[1] Delivery To Be Made On As Is Where Is And Lot Basis.[2]the Location Indicated Is Only Tentative. Railway Reserves The Right To Change The Location Of Sold Loco, Based On The Availability Of Track, Cutting And Loading Space And Other Administrative Reason, As Deemed Fit By The Auction Conducting Officer.[3]gas/chisel Cutting Is Permitted Only To Sizes That Are Loadable With A Crane, Only After Ensuring Sufficient Safety Measures Against Fire Hazards Etc. To Avoid Any Mishap To Any Person, Railway Material Etc. And The Same Should Be Ensured By The Witnessing Officials.[4]in Case Purchasers Require Usage Of Any Railway Assets/materials Such As Electricity/ Forklift Truck Etc. During The Process Of Delivery, They Are Required To Pay, The Prescribed Amount To Railways, As Directed By The Respective Custodian Of The Lot. Special Condition-[1] Reclaimable Item As Said Above In Description Of The Lot, Should Be Returned To The Custodian Before Commencing Delivery.[2] In Order To Make The Assessment, The Purchaser May Visit The Locos Offered For Condemnation And The Site Conditions Before Quoting The Offer.[3]the Purchaser Has To Make His Own Arrangements Such As Tools, Lifting Tackles, Lifting Equipment, Gas Cutting Equipment.[4]the Weight And Quantities Were Taken Into Consideration As Advised By The Custodian [5]the Purchaser May Note That Some Of The Reclaimable Items Of Locos Are To Be Stripped Instead Of Gas Cutting To Avoid Damage To Rc Items And The Purchaser Should Make Such Arrangements.[6]the Purchaser Is Strictly Instructed To Transport/stack All The Reclaimable Items At One Location Well Away From The Cut Off Parts Of The Locos As Directed By The Custodian. [7]the Purchaser Will Be Held Responsible For Any Damage/fire Accident Caused To The Railway Property.[8] Railway Is Not Responsible For Any Shortage.[9] After Completion Of Delivery Purchaser Has To Keep The Cutting And Loading Spot Neat And Clean, Free Of Any Left Over Loco Scrap.[10]railways Does Not Guarantee For Quality, Quantity Description Etc.[11] Delivery Should Commence Immediately After Cutting Without Any Delay.[12]the Courts In Chennai Alone Shall Have Exclusive Jurisdiction In The Matters/disputes Arising Out Of The Contract/arbitration/conciliation Proceedings And The Place Of Arbitration/conciliation, If Any, Shall Be In Chennai Only. [13] Bsv Partly Paid Along With Emd Will Be Forfeited, If Full Payment Is Not Received In Stipulated Time, With Interest If Any Applicable. [14] Part Delivery Is Not Permitted Against Part Payment.[15]if Any Hsd Oil/lube Oil Available In Fuel Tank/oil Sump Of The Said Locos, The Same May Be Returned To The Custodian. (location: Diesel Loco Shed Erode)

Description: CATEGORY: Single plate clutch , Multi plate Clutch unit , Cut section of synchromesh gear box , Model of Mechanical Brake , Model of ABS Brake system , Model of hydraulic brake system , Ackerman steering gear mechanism , Davison steering gear mechanism , Model of power steering gear or recirculating Type or Worm and Wheel or other type of Steering gear , Model of AC pump , Model of SU pump , Lead Acid Battery , Battery Charger , Wheel Balancing Machine , Automobile Electric System , Brake Master cylinder , Cut section model of 4 cylinder 4 stroke petrol engine , AC Induction Motor with VFD for Motorizing already existing models in Lab , Pelton turbine Model , Francis turbine Model , CNC Milling Machine , CNC Turning Lathe , Bench grinding Machine , Digital Pyrometer , Metallurgical Microscope , Polishing Machine , Heat Treatement Furnace Muffle Surface , Spark Test Apparatus , Metallurgical cut off machine , Standard Prepared Readymade Samples or Specimen with Photographs , Apparatus for Verification of Law of Polygon of Forces , Simple Jib Crane Apparatus , Simply Supported beam apparatus , Screw Jack Apparatus , Inclined Plane and Friction Slide Apparatus , Worm and Worm Wheel Apparatus Single Start , Winch Crab single purchase apparatus , Apparatus for determining centre of gravity of regular and irregular lamina , Digital Vernier Callipar , Digital Micrometer , Height Gauge , GO and NO GO thread Plug Gauge , GO and NOGO Snap Gauge , GO and NOGO Ring Gauge , Cylinder rollers and spherical balls , Slip gauges set , Surface roughness tester , Vernier Bevel Protractor , Surface Plate , V block , Dial indicator with stand , Tool Maker Microscope , Auto Collimator with stand , Angle Deckor with set of angle gauges , Profile Projector , Cylindrical bore gauge , Screw thread micrometer , Sine Bar 125mm , Sine Bar 250mm , Feeler Gauge , Wire Gauge , Radius Gauge , Comparator Stand , Angle Plate , Mechanical comparator with stand , Clinometer , Gear Tooth Vernier , Try Square 6 inch , Try Square 12 inch , Thread Measuring Gauge , Electronic Weighing machine , Digital Tachometer , Tool kit , Ampere meter , Pressure gauge , Compound gauge , Ring spanner set , Thermometer with Case , Swaging tool set , Voltmeter , Valve Key , Leak dedector to detect CFC and HFCs , Thermostatic Switch, LP and HP Cut Out, Overload Protector, Filters, Strainers and filter driers , Model of Refrigeration Cycle , Model of Window Air Conditioner , Refrigeration Cycle Testing Rig , Digital Anemometer , Gas Charging Kit , Model of Open type Refrigerant Compressor , Thermocouple , Infrared Thermometer , Models of Safety valve, blow off cock, steam stop valve, Feed check valve, economizer , Model of air compressor , Model of Nestler Boiler , Model of Solex carburettor , Model of Amal carburettor , Model of Ignition System of an automobile , Model of Water Cooling System of an Automobile , Model of Lubrication System of IC Engine , Oxygen Regulator , Green moulding sand , Parting off sand , Crucible

Description: Descr.: Condemned And Unserviceable Bg Alco Loco No.wdm3a 16457 With Available Items [refer Enclosure For The Material Composition].location-diesel Loco Shed/ernakulam, Custodian-sse/dsl/ers.re-claimable Items [1]wheel Set Complete [axle,wheel Disc,bull Gear,rsp Tubes, Axle Boxes With Bearings]- 6 Sets.[2]locomotive Batteries- 8 Nos. S.1539 No.534322 Dt.07.12.2024.note-[1]delivery To Be Made On As Is Where Is And Lot Basis.[2]the Location Indicated Is Only Tentative. Railway Reserves The Right To Change The Location Of Sold Loco, Based On The Availability Of Track, Cutting And Loading Space And Other Administrative Reason, As Deemed Fit By The Auction Conducting Officer.[3]gas/chisel Cutting Is Permitted Only To Sizes That Are Loadable With A Crane, Only After Ensuring Sufficient Safety Measures Against Fire Hazards Etc. To Avoid Any Mishap To Any Person, Railway Material Etc. And The Same Should Be Ensured By The Witnessing Officials.[4]in Case Purchasers Require Usage Of Any Railway Assets/materials Such As Electricity/ Forklift Truck Etc. During The Process Of Delivery, They Are Required To Pay, The Prescribed Amount To Railways, As Directed By The Respective Custodian Of The Lot. Special Condition- [1] Reclaimable Item As Said Above In Description Of The Lot, Should Be Returned To The Custodian Before Commencing Delivery.[2] In Order To Make The Assessment, The Purchaser May Visit The Locos Offered For Condemnation And The Site Conditions Before Quoting The Offer.[3]the Purchaser Has To Make His Own Arrangements Such As Tools, Lifting Tackles, Lifting Equipment, Gas Cutting Equipment.[4]the Weight And Quantities Were Taken Into Consideration As Advised By The Custodian [5]the Purchaser May Note That Some Of The Reclaimable Items Of Locos Are To Be Stripped Instead Of Gas Cutting To Avoid Damage To Rc Items And The Purchaser Should Make Such Arrangements.[6]the Purchaser Is Strictly Instructed To Transport/stack All The Reclaimable Items At One Location Well Away From The Cut Off Parts Of The Locos As Directed By The Custodian. [7]the Purchaser Will Be Held Responsible For Any Damage/fire Accident Caused To The Railway Property.[8] Railway Is Not Responsible For Any Shortage.[9] After Completion Of Delivery Purchaser Has To Keep The Cutting And Loading Spot Neat And Clean, Free Of Any Left Over Loco Scrap.[10]railways Does Not Guarantee For Quality, Quantity Description Etc.[11] Delivery Should Commence Immediately After Cutting Without Any Delay. [12]further Stripping Of Sub Assemblies Such As Motors, Alternators, Turbo, Lube Oil Cooler, Compressor, Etc. Should Be Strictly Prohibited In Railway Premises To Prevent Unnecessary Delays And Pollution.[13]the Courts In Chennai Alone Shall Have Exclusive Jurisdiction In The Matters/disputes Arising Out Of The Contract/arbitration/conciliation Proceedings And The Place Of Arbitration/conciliation, If Any, Shall Be In Chennai Only. [14] Bsv Partly Paid Along With Emd Will Be Forfeited, If Full Payment Is Not Received In Stipulated Time, With Interest If Any Applicable. [15] Part Delivery Is Not Permitted Against Part Payment. (location: Diesel Loco Shed Ernakulam)

Description: Descr.: Condemned And Unserviceable Bg Alco Loco No.wdm3a 16405 With Available Items [refer Enclosure For The Material Composition].location-diesel Loco Shed/ernakulam, Custodian-sse/dsl/ers.re-claimable Items [1]wheel Set Complete [axle,wheel Disc,bull Gear,rsp Tubes, Axle Boxes With Bearings]- 6 Sets.[2]locomotive Batteries- 8 Nos. S.1539 No.534321 Dt.07.12.2024.note-[1]delivery To Be Made On As Is Where Is And Lot Basis.[2]the Location Indicated Is Only Tentative. Railway Reserves The Right To Change The Location Of Sold Loco, Based On The Availability Of Track, Cutting And Loading Space And Other Administrative Reason, As Deemed Fit By The Auction Conducting Officer.[3]gas/chisel Cutting Is Permitted Only To Sizes That Are Loadable With A Crane, Only After Ensuring Sufficient Safety Measures Against Fire Hazards Etc. To Avoid Any Mishap To Any Person, Railway Material Etc. And The Same Should Be Ensured By The Witnessing Officials.[4]in Case Purchasers Require Usage Of Any Railway Assets/materials Such As Electricity/ Forklift Truck Etc. During The Process Of Delivery, They Are Required To Pay, The Prescribed Amount To Railways, As Directed By The Respective Custodian Of The Lot. Special Condition- [1] Reclaimable Item As Said Above In Description Of The Lot, Should Be Returned To The Custodian Before Commencing Delivery.[2] In Order To Make The Assessment, The Purchaser May Visit The Locos Offered For Condemnation And The Site Conditions Before Quoting The Offer.[3]the Purchaser Has To Make His Own Arrangements Such As Tools, Lifting Tackles, Lifting Equipment, Gas Cutting Equipment.[4]the Weight And Quantities Were Taken Into Consideration As Advised By The Custodian [5]the Purchaser May Note That Some Of The Reclaimable Items Of Locos Are To Be Stripped Instead Of Gas Cutting To Avoid Damage To Rc Items And The Purchaser Should Make Such Arrangements.[6]the Purchaser Is Strictly Instructed To Transport/stack All The Reclaimable Items At One Location Well Away From The Cut Off Parts Of The Locos As Directed By The Custodian. [7]the Purchaser Will Be Held Responsible For Any Damage/fire Accident Caused To The Railway Property.[8] Railway Is Not Responsible For Any Shortage.[9] After Completion Of Delivery Purchaser Has To Keep The Cutting And Loading Spot Neat And Clean, Free Of Any Left Over Loco Scrap.[10]railways Does Not Guarantee For Quality, Quantity Description Etc.[11] Delivery Should Commence Immediately After Cutting Without Any Delay. [12]further Stripping Of Sub Assemblies Such As Motors, Alternators, Turbo, Lube Oil Cooler, Compressor, Etc. Should Be Strictly Prohibited In Railway Premises To Prevent Unnecessary Delays And Pollution.[13]the Courts In Chennai Alone Shall Have Exclusive Jurisdiction In The Matters/disputes Arising Out Of The Contract/arbitration/conciliation Proceedings And The Place Of Arbitration/conciliation, If Any, Shall Be In Chennai Only. [14] Bsv Partly Paid Along With Emd Will Be Forfeited, If Full Payment Is Not Received In Stipulated Time, With Interest If Any Applicable. [15] Part Delivery Is Not Permitted Against Part Payment. (location: Diesel Loco Shed Ernakulam)

Description: Descr.: Condemned And Unserviceable Bg Alco Loco No.wdm3d 11149 With Available Items [refer Enclosure For The Material Composition].location-diesel Loco Shed/erode, Custodian-sse/dsl/ed.re-claimable Items [1] Wheel Set Complete [axle, Wheel Disc, Bull Gear, Rsp Tube, Axle Boxes With Bearings]-6 Sets.[2]head Light -1 Nos S.1539 No.636452 Dt.28.12.2024.note-[1] Delivery To Be Made On As Is Where Is And Lot Basis.[2]the Location Indicated Is Only Tentative. Railway Reserves The Right To Change The Location Of Sold Loco, Based On The Availability Of Track, Cutting And Loading Space And Other Administrative Reason, As Deemed Fit By The Auction Conducting Officer.[3]gas/chisel Cutting Is Permitted Only To Sizes That Are Loadable With A Crane, Only After Ensuring Sufficient Safety Measures Against Fire Hazards Etc. To Avoid Any Mishap To Any Person, Railway Material Etc. And The Same Should Be Ensured By The Witnessing Officials.[4]in Case Purchasers Require Usage Of Any Railway Assets/materials Such As Electricity/ Forklift Truck Etc. During The Process Of Delivery, They Are Required To Pay, The Prescribed Amount To Railways, As Directed By The Respective Custodian Of The Lot. Special Condition-[1] Reclaimable Item As Said Above In Description Of The Lot, Should Be Returned To The Custodian Before Commencing Delivery.[2] In Order To Make The Assessment, The Purchaser May Visit The Locos Offered For Condemnation And The Site Conditions Before Quoting The Offer.[3]the Purchaser Has To Make His Own Arrangements Such As Tools, Lifting Tackles, Lifting Equipment, Gas Cutting Equipment.[4]the Weight And Quantities Were Taken Into Consideration As Advised By The Custodian [5]the Purchaser May Note That Some Of The Reclaimable Items Of Locos Are To Be Stripped Instead Of Gas Cutting To Avoid Damage To Rc Items And The Purchaser Should Make Such Arrangements.[6]the Purchaser Is Strictly Instructed To Transport/stack All The Reclaimable Items At One Location Well Away From The Cut Off Parts Of The Locos As Directed By The Custodian. [7]the Purchaser Will Be Held Responsible For Any Damage/fire Accident Caused To The Railway Property.[8] Railway Is Not Responsible For Any Shortage.[9] After Completion Of Delivery Purchaser Has To Keep The Cutting And Loading Spot Neat And Clean, Free Of Any Left Over Loco Scrap.[10]railways Does Not Guarantee For Quality, Quantity Description Etc.[11] Delivery Should Commence Immediately After Cutting Without Any Delay.[12]the Courts In Chennai Alone Shall Have Exclusive Jurisdiction In The Matters/disputes Arising Out Of The Contract/arbitration/conciliation Proceedings And The Place Of Arbitration/conciliation, If Any, Shall Be In Chennai Only. [13] Bsv Partly Paid Along With Emd Will Be Forfeited, If Full Payment Is Not Received In Stipulated Time, With Interest If Any Applicable. [14] Part Delivery Is Not Permitted Against Part Payment. [15]if Any Hsd Oil/lube Oil Available In Fuel Tank/oil Sump Of The Said Locos, The Same May Be Returned To The Custodian. (location: Diesel Loco Shed Erode)

Description: Descr.: Condemned And Unserviceable Bg Alco Loco No.wdm3d 11121 With Available Items [refer Enclosure For The Material Composition].location-diesel Loco Shed/erode, Custodian-sse/dsl/ed.re-claimable Items [1] Wheel Set Complete [axle, Wheel Disc, Bull Gear, Rsp Tube, Axle Boxes With Bearings]-6 Sets. S.1539 No.636451 Dt.28.12.2024.note-[1] Delivery To Be Made On As Is Where Is And Lot Basis.[2]the Location Indicated Is Only Tentative. Railway Reserves The Right To Change The Location Of Sold Loco, Based On The Availability Of Track, Cutting And Loading Space And Other Administrative Reason, As Deemed Fit By The Auction Conducting Officer.[3]gas/chisel Cutting Is Permitted Only To Sizes That Are Loadable With A Crane, Only After Ensuring Sufficient Safety Measures Against Fire Hazards Etc. To Avoid Any Mishap To Any Person, Railway Material Etc. And The Same Should Be Ensured By The Witnessing Officials.[4]in Case Purchasers Require Usage Of Any Railway Assets/materials Such As Electricity/ Forklift Truck Etc. During The Process Of Delivery, They Are Required To Pay, The Prescribed Amount To Railways, As Directed By The Respective Custodian Of The Lot. Special Condition-[1] Reclaimable Item As Said Above In Description Of The Lot, Should Be Returned To The Custodian Before Commencing Delivery.[2] In Order To Make The Assessment, The Purchaser May Visit The Locos Offered For Condemnation And The Site Conditions Before Quoting The Offer.[3]the Purchaser Has To Make His Own Arrangements Such As Tools, Lifting Tackles, Lifting Equipment, Gas Cutting Equipment.[4]the Weight And Quantities Were Taken Into Consideration As Advised By The Custodian [5]the Purchaser May Note That Some Of The Reclaimable Items Of Locos Are To Be Stripped Instead Of Gas Cutting To Avoid Damage To Rc Items And The Purchaser Should Make Such Arrangements.[6]the Purchaser Is Strictly Instructed To Transport/stack All The Reclaimable Items At One Location Well Away From The Cut Off Parts Of The Locos As Directed By The Custodian. [7]the Purchaser Will Be Held Responsible For Any Damage/fire Accident Caused To The Railway Property.[8] Railway Is Not Responsible For Any Shortage.[9] After Completion Of Delivery Purchaser Has To Keep The Cutting And Loading Spot Neat And Clean, Free Of Any Left Over Loco Scrap.[10]railways Does Not Guarantee For Quality, Quantity Description Etc.[11] Delivery Should Commence Immediately After Cutting Without Any Delay.[12]the Courts In Chennai Alone Shall Have Exclusive Jurisdiction In The Matters/disputes Arising Out Of The Contract/arbitration/conciliation Proceedings And The Place Of Arbitration/conciliation, If Any, Shall Be In Chennai Only. [13] Bsv Partly Paid Along With Emd Will Be Forfeited, If Full Payment Is Not Received In Stipulated Time, With Interest If Any Applicable. [14] Part Delivery Is Not Permitted Against Part Payment.[15]if Any Hsd Oil/lube Oil Available In Fuel Tank/oil Sump Of The Said Locos, The Same May Be Returned To The Custodian. (location: Diesel Loco Shed Erode)

Description: S&t Ms/ci Scrap - 98414653(15) Cond & U/s S&t Ms/ci Scrap Consisting Of Block Instruments, Ballast Rake, Pan Motors, Wire Claws, Rail Dollies, Trollies Bg, Iron Boards, Fire Buckets, Tibs, Led Based Sl,nr,cib Gps Clocks, Cib Poles, Signiage Boards, Rolling Light Boxes, Mould Shoes, Lc Boards, Ips, Data Logger, Station Master Panel, Ufsbi, Charge Overswitch Boxes, Iron Cot,bct Cum Fuse Boxes Ms Tpic Switches, Doc Startors,ball Bearing, Pipes Push Trolley With Body,dip Trolley,lc Gate Lifting Barriers, Pigeon Hole Cabinet Steel Comportment, Rusted Drums, Injectors Fip Repair Kit, Iron Junction Boxes,empty Gas Cylinders,ct Iron Boxes, Twin Fitting Boxes, Twin Tube T-5 Fitting Boxes, Bus Bars,shovels, Ms Pipes, Gi Wire, Ms Fire Extinguisher,eolb Pedastals,winch,point Tlds, Axle Counter Boards, Cable Junction Box ,lc Gate Booms,ms Flat,caution Boards,number Plates,gi Pipe,pump Starter Panels, Meeting Post Eolb, Shunt Signal Unit,first-aid Boxes, Signal Posts, Signal Ladders, Signal Cages, Ips Stands, Battery Stands, Point Clamps, Thick Web Point Clamps, Point Ground Gear Connecting Rods, Stn.master Operating Panels, Relay Racks, Ct Racks,eolb Meeting Posts, Molb Booms, Point Ctb, Tljb Shunt Signal Posts, Signal Hoots, Booms Operating Panels,train Lead Junction Boxes, Ms Channels,roneo Machine, Shovels,steel Rack Hydraulic Mobile Floor Crane,half G.r.s Boxes,vp/pr Boxes,relay Frames,offset Brackets,point Tld Boxes,health Monitor Unit,eolb Gate Boom,dip Trollies,rail Guard,mould Shoes, Hand Pallet Trucks,meter Boxes, Tommy Bars, Tubular Poles, Amf Panel,pressure Tank Toe Load Machine, Bus -bar Panels, Ahu, Lhb Wheel Stand, Cls 2-aspects Signal Units, Sms Alert System,fire Alarm Boxes, Stop Boards, Eolb Gate, Pan Motors, Values, X-ray Machine Spare Parts, Processing Tanks, Hot Air Oven, Ladder Trolley, Main Switches, Electrical Fittings, Signal Fused, Oh Projector,hs Lamps,hydraulic Trucks,palletes,pedestal Base,trolleys,3 Aspect S,channel,tie Bar,grill,angle,plates Tool Inserts, Iron Skids,fabricated Structures/items And Other Misc S&t Ms/ci Scrap Items Etc., With Or Without Wires & Other Attachments . Hsn Code: 72044900, Gst @18% On Forward Charge Basis. Note:1) Delivery On Actual Weighment Basis.2) Gas Cutting Permitted To Loadable Sizes. Location: Ferrous Yard, Bin Nos: F-1& F-2.

Description: Descr.: Condemned And Unserviceable Bg Alco Loco No.wdm3d 11206 With Available Items [refer Enclosure For The Material Composition].location-diesel Loco Shed/erode, Custodian-sse/dsl/ed.re-claimable Items [1] Wheel Set Complete [axle, Wheel Disc, Bull Gear, Rsp Tube, Axle Boxes With Bearings]-6 Sets. S.1539 No.636456 Dt.28.12.2024.note-[1] Delivery To Be Made On As Is Where Is And Lot Basis.[2]the Location Indicated Is Only Tentative. Railway Reserves The Right To Change The Location Of Sold Loco, Based On The Availability Of Track, Cutting And Loading Space And Other Administrative Reason, As Deemed Fit By The Auction Conducting Officer.[3]gas/chisel Cutting Is Permitted Only To Sizes That Are Loadable With A Crane, Only After Ensuring Sufficient Safety Measures Against Fire Hazards Etc. To Avoid Any Mishap To Any Person, Railway Material Etc. And The Same Should Be Ensured By The Witnessing Officials.[4]in Case Purchasers Require Usage Of Any Railway Assets/materials Such As Electricity/ Forklift Truck Etc. During The Process Of Delivery, They Are Required To Pay, The Prescribed Amount To Railways, As Directed By The Respective Custodian Of The Lot. Special Conditions -[1] Reclaimable Item As Said Above In Description Of The Lot, Should Be Returned To The Custodian Before Commencing Delivery.[2] In Order To Make The Assessment, The Purchaser May Visit The Locos Offered For Condemnation And The Site Conditions Before Quoting The Offer.[3]the Purchaser Has To Make His Own Arrangements Such As Tools, Lifting Tackles, Lifting Equipment, Gas Cutting Equipment.[4]the Weight And Quantities Were Taken Into Consideration As Advised By The Custodian [5]the Purchaser May Note That Some Of The Reclaimable Items Of Locos Are To Be Stripped Instead Of Gas Cutting To Avoid Damage To Rc Items And The Purchaser Should Make Such Arrangements.[6]the Purchaser Is Strictly Instructed To Transport/stack All The Reclaimable Items At One Location Well Away From The Cut Off Parts Of The Locos As Directed By The Custodian. [7]the Purchaser Will Be Held Responsible For Any Damage/fire Accident Caused To The Railway Property.[8] Railway Is Not Responsible For Any Shortage.[9] After Completion Of Delivery Purchaser Has To Keep The Cutting And Loading Spot Neat And Clean, Free Of Any Left Over Loco Scrap.[10]railways Does Not Guarantee For Quality, Quantity Description Etc.[11] Delivery Should Commence Immediately After Cutting Without Any Delay.[12]the Courts In Chennai Alone Shall Have Exclusive Jurisdiction In The Matters/disputes Arising Out Of The Contract/arbitration/conciliation Proceedings And The Place Of Arbitration/conciliation, If Any, Shall Be In Chennai Only. [13] Bsv Partly Paid Along With Emd Will Be Forfeited, If Full Payment Is Not Received In Stipulated Time, With Interest If Any Applicable. [14] Part Delivery Is Not Permitted Against Part Payment.[15]if Any Hsd Oil/lube Oil Available In Fuel Tank/oil Sump Of The Said Locos, The Same May Be Returned To The Custodian. (location: Diesel Loco Shed/erode)

Details: Description:- Launching Of Precast Rcc Box Segments For Rubs/limited Height Subways (lhs) Of any Size And Barrel Length For Single/double Line As Per Approved Drawings To The Correct Alignment and Position In Electrified /non-electrified Sections Safeguarding All Utilities (s&t Cable, Power Cable, ohe, Pipelines Etc.) Including Transportation Of Box Segments From Casting Yard To Site Of Launching, dismantling Of The Existing Track, Removing & Stacking Of Ballast, Cutting Of Formation And Approach road Below Or Above Bed Level, Placing Of Base Slabs & Box Segments In Position, Backfilling After launching Of Precast Box Segment, Ballasting & Re-laying Of Track To Correct Alignment And Geometry, packing And Further Maintenance Till Allowing Non-stop 20 Kmph Over The Re-laid Track, Complete In All respect To The Satisfaction Of Engineer-in-charge. The Rate Is All Inclusive Except The Cost Of Rcc Box segments, Base Slabs And Backfill Material Which Shall Either Be Supplied By Railway Or Paid Extra under Relevant Item. Note: Minimum Equipment Required During Block Shall Be (i) Crawler Mounted hydraulic Excavator Of Min 200 Hp And Bucket Capacity 2.5 Cum - 3 Numbers And (ii) 3 Cranes Of adequate Boom Length Suitable For Launching Box Segments In Position (min Capacity Of Each Crane - 200 Mt For Single Line And 300 Mt For Double Line) Apart From Other Equipments, Tools, Plants And machinery Required To Complete The Job Within The Allowed Block Period.