Compactor Tenders

Details: Description:- Launching Of Precast Rcc Box Segments Of Any Size And Barrel Length For Single/double line As Per Approved Drawings To The Correct Alignment And Position In Electrified / Non-electrified sectionssafeguarding Allutilities(s&tcable,powercable,ohe,pipelinesetc.)including transportation Of Box Segments From Casting Yard To Site Of Launching, Dismantling Of The Existing track, Removing & Stacking Of Ballast, Removing Surcharge, Dismantling Of Existing Bridge Built With stone Masonry / Cement Concrete Including Cutting Of Formation, Placing Of Box Segments In Position either On Base Slab Or Prepared Foundation, Backfilling After Launching Of Precast Box Segment And compaction Of Earth In Surcharge, Ballasting & Re-laying Of Track To Correct Alignment And Geometry, packing And Further Maintenance Till Allowing Non-stop 20 Kmph Over The Re-laid Track, Complete In All respect As Per Approved Drawing To The Satisfaction Of Engineer-in-charge. The Rate Is All Inclusive except The Cost Of Rcc Box Segments, Base Slabs (if Required) And Backfill Material Which Shall Either be Supplied By Railway Or Paid Extra Under Relevant Item.note: Unit Of 'each' Here Means Bridge Of span(s) With A Total Linear Waterway Up To 3m. Double Line Note: Minimum Equipment Required Shall be (i) Crawler Mounted Hydraulic Excavator Of Min 200 Hp And Bucket Capacity 2.5 Cum - 3 Numbers (ii) Cranes Minimum 200 T Capacity - 3 Nos., (iii) Stone Breaker - 1 No., (iv) Road Trailer Of 20 Mt capacity - 1 No., (v)tippers - 2 Nos. And (vi) Tractors - 2 Nos. (vii) Slope Vibratory Compactor - 2 Nos. and Other Required Machineries Etc. In Good Working Condition At Site Of Work.

Details: Launching Of Precast Rcc Box Segments Of Any Size And Barrel Length For Single/double Line As Per approved Drawings To The Correct Alignment And Position In Electrified / Non-electrified Sections Safeguarding All utilities ( S&t Cable, Power Cable, Ohe, Pipelines Etc.) Including Transportation Of Box Segments From Casting Yard tositeoflaunching,dismantlingoftheexistingtrack,removing&stackingofballast,removingsurcharge, dismantling Of Existing Bridge Built With Stone Masonry / Cement Concrete Including Cutting Of Formation, Placing Of box Segments In Position Either On Base Slab Or Prepared Foundation, Backfilling After Launching Of Precast Box segment And Compaction Of Earth In Surcharge, Ballasting & Re-laying Of Track To Correct Alignment And Geometry, packing And Further Maintenance Till Allowing Non-stop 20 Kmph Over The Re-laid Track, Complete In All Respect As per Approved Drawing To The Satisfaction Of Engineer-in-charge. The Rate Is All Inclusive Except The Cost Of Rcc box Segments, Base Slabs (if Required) And Backfill Material Which Shall Either Be Supplied By Railway Or Paid Extra under Relevant Item.note: Unit Of 'each' Here Means Bridge Of Span(s) With A Total Linear Waterway Up To 3m. double Line Note: Minimum Equipment Required Shall Be (i) Crawler Mounted Hydraulic Excavator Of Min 200 Hp and Bucket Capacity 2.5 Cum - 3 Numbers (ii) Cranes Minimum 200 T Capacity - 3 Nos., (iii) Stone Breaker - 1 No., (iv) Road Trailer Of 20 Mt Capacity - 1 No., (v)tippers - 2 Nos. And (vi) Tractors - 2 Nos. (vii) Slope Vibratory compactor - 2 Nos. And Other Required Machineries Etc. In Good Working Condition At Site Of Work.

Details: Description:- Cess Repair/widening Work As Per Rdso Specifications And Guidelines Rdso/2020/ge: Irs-0004 or Latest In Running Line With Suitable Soil To The Designed Profile The Work Shall Include Uprooting And Disposing Of all The Vegetation, Benching At Every 30 Cm Vertical Height, Earthwork In Benching Portion And Compaction Using suitable Slope Vibratory Rollers/compactors Etc. To Achieve Prescribed Mdd. Note: 1. Payment Of Cess Repairs shall Be Based On The Quantities Worked Out From The Cross Sectional Calculations Only And Worked Out From The initial Ground Levels Before Doing Benching And Final Levels As Done For New Embankment. The Earth Work In benching Portion Shall Not Be Paid Extra As The Same Has Been Included In The Rate. 2. The Earth Work Shall Be started Only After Completing Of The Benching And Certified. 3. The Benching Work Shall Be Done For A Maximum height Of 1.50 M At Any Time Based On The Progress Of Earthwork Starting From Toe Of The Embankment.

Details: Description:- Sboq itemno. 1001-earthworkinfillinginformationincludingtrolleyrefugesetcusing contractor's Earth Of Approved Quality Procured From Outside Railway Land Including Site Clearances, Setting Out and Demarcation, Benching, Initial Compaction Of Subsoil After Levelling The Surface After Site Clearance, Spreading loose Earth In 30 Cm Layers Using Grader Up To Extra Width Of 0.5 M Beyond Designed Profile, Compaction Using vibratory Compactors So As To Achieve Minimum In Situ Dry Density Of 98% Of Mdd , Top And Side Dressing And removal Of Extra Earth From Sides To Provide Final Formation As Per Designed Profile As Per Rdso Guidelines. The rate Shall Include Cutting Of Trees With Girth Up To 60 Cm, Making Good The Pockets And Depressions Left In Soil during Clearing And Uprooting Of Jungle/trees At Site And One Round Of Heavy Rolling Of Sub-soil Thereafter. The Rate shall Not Include Cutting Of Trees Of Girth Beyond 60 Cm And Compaction Which Shall Be Paid Separately.

Details: Description:- Cess Repair/widening Work As Per Rdso Specifications And Guidelines Rdso/2020/ge: Irs-0004 or Latest In Running Line With Suitable Soil To The Designed Profile The Work Shall Include Uprooting And Disposing Of all The Vegetation, Benching At Every 30 Cm Vertical Height, Earthwork In Benching Portion And Compaction Using suitable Slope Vibratory Rollers/compactors Etc. To Achieve Prescribed Mdd. Note: 1. Payment Of Cess Repairs shall Be Based On The Quantities Worked Out From The Cross Sectional Calculations Only And Worked Out From The initial Ground Levels Before Doing Benching And Final Levels As Done For New Embankment. The Earth Work In benching Portion Shall Not Be Paid Extra As The Same Has Been Included In The Rate. 2. The Earth Work Shall Be started Only After Completing Of The Benching And Certified. 3. The Benching Work Shall Be Done For A Maximum height Of 1.50 M At Any Time Based On The Progress Of Earthwork Starting From Toe Of The Embankment.

Details: Description:- Cess Repair/widening Work As Per Rdso Specifications And Guidelines Rdso/2020/ge: Irs-0004 or Latest In Running Line With Suitable Soil To The Designed Profile The Work Shall Include Uprooting And Disposing Of all The Vegetation, Benching At Every 30 Cm Vertical Height, Earthwork In Benching Portion And Compaction Using suitable Slope Vibratory Rollers/compactors Etc. To Achieve Prescribed Mdd. Note: 1. Payment Of Cess Repairs shall Be Based On The Quantities Worked Out From The Cross Sectional Calculations Only And Worked Out From The initial Ground Levels Before Doing Benching And Final Levels As Done For New Embankment. The Earth Work In benching Portion Shall Not Be Paid Extra As The Same Has Been Included In The Rate. 2. The Earth Work Shall Be started Only After Completing Of The Benching And Certified. 3. The Benching Work Shall Be Done For A Maximum height Of 1.50 M At Any Time Based On The Progress Of Earthwork Starting From Toe Of The Embankment.

Details: Description:- Cess Repair/widening Work As Per Rdso Specifications And Guidelines Rdso/2020/ge: Irs-0004 or Latest In Running Line With Suitable Soil To The Designed Profile The Work Shall Include Uprooting And Disposing Of all The Vegetation, Benching At Every 30 Cm Vertical Height, Earthwork In Benching Portion And Compaction Using suitable Slope Vibratory Rollers/compactors Etc. To Achieve Prescribed Mdd. Note: 1. Payment Of Cess Repairs shall Be Based On The Quantities Worked Out From The Cross Sectional Calculations Only And Worked Out From The initial Ground Levels Before Doing Benching And Final Levels As Done For New Embankment. The Earth Work In benching Portion Shall Not Be Paid Extra As The Same Has Been Included In The Rate. 2. The Earth Work Shall Be started Only After Completing Of The Benching And Certified. 3. The Benching Work Shall Be Done For A Maximum height Of 1.50 M At Any Time Based On The Progress Of Earthwork Starting From Toe Of The Embankment.

Details: Description:- Cess Repair/widening Work As Per Rdso Specifications And Guidelines Rdso/2020/ge: Irs-0004 or Latest In Running Line With Suitable Soil To The Designed Profile The Work Shall Include Uprooting And Disposing Of all The Vegetation, Benching At Every 30 Cm Vertical Height, Earthwork In Benching Portion And Compaction Using suitable Slope Vibratory Rollers/compactors Etc. To Achieve Prescribed Mdd. Note: 1. Payment Of Cess Repairs shall Be Based On The Quantities Worked Out From The Cross Sectional Calculations Only And Worked Out From The initial Ground Levels Before Doing Benching And Final Levels As Done For New Embankment. The Earth Work In benching Portion Shall Not Be Paid Extra As The Same Has Been Included In The Rate. 2. The Earth Work Shall Be started Only After Completing Of The Benching And Certified. 3. The Benching Work Shall Be Done For A Maximum height Of 1.50 M At Any Time Based On The Progress Of Earthwork Starting From Toe Of The Embankment.

Details: Description:- Cess Repair/widening Work As Per Rdso Specifications And Guidelines Rdso/2020/ge: Irs-0004 or Latest In Running Line With Suitable Soil To The Designed Profile The Work Shall Include Uprooting And Disposing Of all The Vegetation, Benching At Every 30 Cm Vertical Height, Earthwork In Benching Portion And Compaction Using suitable Slope Vibratory Rollers/compactors Etc. To Achieve Prescribed Mdd. Note: 1. Payment Of Cess Repairs shall Be Based On The Quantities Worked Out From The Cross Sectional Calculations Only And Worked Out From The initial Ground Levels Before Doing Benching And Final Levels As Done For New Embankment. The Earth Work In benching Portion Shall Not Be Paid Extra As The Same Has Been Included In The Rate. 2. The Earth Work Shall Be started Only After Completing Of The Benching And Certified. 3. The Benching Work Shall Be Done For A Maximum height Of 1.50 M At Any Time Based On The Progress Of Earthwork Starting From Toe Of The Embankment.

Details: Description:- Cess Repair/widening Work As Per Rdso Specifications And Guidelines Rdso/2020/ge: Irs-0004 Or Latest In Running Line With Suitable Soil To The Designed Profile The Work Shall Include Uprooting And Disposing Of all The Vegetation, Benching At Every 30 Cm Vertical Height, Earthwork In Benching Portion And Compaction Using suitable Slope Vibratory Rollers/compactors Etc. To Achieve Prescribed Mdd. Note: 1. Payment Of Cess Repairs shall Be Based On The Quantities Worked Out From The Cross Sectional Calculations Only And Worked Out From The initial Ground Levels Before Doing Benching And Final Levels As Done For New Embankment. The Earth Work In benching Portion Shall Not Be Paid Extra As The Same Has Been Included In The Rate. 2. The Earth Work Shall Be started Only After Completing Of The Benching And Certified. 3. The Benching Work Shall Be Done For A Maximum height Of 1.50 M At Any Time Based On The Progress Of Earthwork Starting From Toe Of The Embankment.