Cleaning Tenders

Description: Condemned Civil Structure Consisting Of 1] Cond. Qtr No. 66, 6 Unit, 2] Cond. Qtr No. 67, 6 Unit, 3] Cond. Qtr No. 68, 5 Unit, 4] Cond. Qtr No. 69, 6 Unit, 5] Cond. Qtr No. 70, 2 Unit, 6] Cond. Qtr No. 82, 1 Unit, 7] Cond. Qtr No. 88, 3 Unit, 8] Cond. Qtr No. 89, 2 Unit, 9] Cond. Qtr No. 90, 3 Unit, 10] Cond. Qtr No. 113, 1 Unit, 11] Cond. Qtr No. 118, 8 Unit, 12] Cond. Qtr No. 138, 8 Unit, 13] Cond. Qtr No. 139, 3 Unit, 14] Cond. Qtr No. 140, 3 Unit, 15] Cond. Qtr No. 141, 3 Unit, 16] Cond. Qtr No. 142, 3 Unit, 17] Cond. Qtr No. 143, 3 Unit, 18] Cond. Qtr No. 144, 2 Unit, 19] Cond. Qtr No. 145, 3 Unit, 20] Cond. Qtr No. 119, 1 Unit, 21] Cond. Qtr No. 180, 4 Unit, 22] Cond. Qtr No. 181, 2 Unit, 23] Cond. Qtr No. 182, 2 Unit, 24] Cond. Qtr No. 183, 2 Unit, 25] Cond. Qtr No. 30a, 3 Unit, 26] Cond. Qtr No. 30b, 3 Unit, 27] Cond. Qtr No. 30c, 3 Unit, 28] Cond. Qtr No. 30d, 3 Unit, 29] Cond. Qtr No. 30e, 5 Unit, Total 99 Units, Total Qty- 01 By Lot. Free Delivery Period [fdp] For This Lot Has Been Fixed As 80 [eighty] Days.above Mentioned Condemned Structure Are Offered Excluding Common Wall Of Adjacent Another Unit And Boundary Wall If Any Which Has Not Been Offered Or Sold . Therefore Such Type Of Cases Should Be Dealt With Proper Care During Dismantling So That Adjacent Unoffered And Unsold Unit Are Not Damage Or Broken In Any Way. Condition-1] Before Bidding Purchaser Are Invariably Advised To See The Lot And Also Check Whether Any Unit Of The Offered Lot Is Occupied In Any Way. If Found Occupied , In That Case It Is Required To Be Brought To The Notice Of The Custodian As Well As To This Office [ I.e. Sr.dmm/hwh ] In Writting At Least 24 Hours Prior To The Start Of Auction For Taking Further Necessary Action. 2] No Complaints/claim By The Purchaser Will Be Entertained In This Regard After E Auction Sale Is Completed. 3] The Sold Lot Will Be Handed Over To The Purchaser In Presence Of Concerned Custodian , Isa-sv, Rpf, Cdms And Other Personnel As The Case May Be , 4] Dismantling Work Of Sold Structure Is To Be Done By The Purchaser On His Own Arrangement By Providing Tools, Safety Gears, Machinery And Labour Required For The Purpose. 5] Purchaser Should Ensure To Keep A Safety Banner Around The Work Spot. 6] Any Loss / Damage That May Arise During Dismantling Work Due To Accident Etc, Shall Be The Sole Responsibility Of The Purchaser And No Claim On This Account Will Be Entertained By The Railways Under Any Circumstances, 7] Dismantling Of The Sold Lot Is Allowed Only Up To The Ground Level Of The Condemned Structures. 8] Dismantling Of The Condemned Structures [sold Lot] Will Take Place In Presence Of Engg. Officials. 9] Purchaser Shall Ensure That Dismantling Work Does Not Affect Or Endanger Safety Of Life And Railway Property In Near Vicinity.10] No Explosives Can Be Used For Demolishing, 11] Custodian / Engg. Official Has To Ensure That Debris Arisen Out Of Dismantling To Be Cleared By Purchaser In Proportion Of Delivery Of Released Materials And He Will Invariably Certify In Sale Completion Report That All Debris/waste Etc. Generated Has Been Cleared By Purchaser And The Land Is Made Clean, Clear And Level For Further Use.

Description: Scrap Condemned Diesel Loco No.13187 Wdg3a/udl Diesel Shed [qty. 01 No. 118 Mt Approximately].i.e 1. Chassis With Driver Cab Long Hood And Radiator Room With All Accessories, -01 Nos;2. Ht Cbc Coupler - 02 Nos;3. Air Brake Pipe- 01 Loco Set;4. Truck Frame Finished Casting With All Fitting - 01 Loco Set 5. Main Reservoir - 02 Nos 6. Power Pack Complete With Tg Assembly - 01 Loco Set;7. Radiator Cores - 01 Loco Sets 8. Radiator Fan Assembly And Complete Drive Units- 01 Loco Sets 9. Traction Motors- 06 Nos (01 Loco Set) ,10. Rectifier Units Complete - 01 Loco Set ,11. All Small Rotating Equipment Intact - 01 Loco Set, 12. Power Cable & Control Cable- 01 Loco Set,13. E. Power Contactor -01 Loco Set, 14. Battery- 08 Nos (01 Loco Set) Condition - [1]as Is Where Is Basis[2]cutting Allowed. [3] Wheel Sets 06 Sets, Axle Box 06 Pair & Bull Gear 06 Nos. Are Excluded From Sale. Excluded Item To Be Returned To The Custodian In Good Condition By The Purchaser At The Time Of Delivery. 4.the Purchaser Should Visit The Condemned Loco As Well As Its Actual Location Before Bidding, 5. The Scrap Loco Is Sold On As Is Where Is Basis Therefore Railways Does Not Guarantee For Quality Or Quantity As Per Description Etc. And Railways Is Not Responsible For Any Type Of Shortage During Delivery, 6.dismantling And Cutting Is Permitted For Loading And Delivery Purpose, 7. The Purchaser Has To Make His Own Arrangements Such As Tools, Lifting Tackles/vehicle And Necessary Trained Men For Cutting And Dismantling The Components Of The Condemned Loco As Per Requirements, 8. The Purchaser Is Required To Stack All The Reclaimable/excluded Items At One Location Well Away From The Cut Up Parts Of The Locos And It Is Required To Be Returned To The Custodian Before Affecting The Delivery. Purchaser Should Take Adequate Precaution During Dismantling Of Excluded Fittings Item So That The Same Can Be Return Over To The Custodian In A Sound, Undamaged And Intact Condition Otherwise Railway Reserve The Right To Recover The Amount Against Damaged Item Prior To The Delivery, 9. The Purchaser Is Required To Take Adequate Safety Measures So That No Railway Property In The Near Vicinity Of Cutting Spot Are Damaged In Any Way. The Purchaser Will Be Held Responsible For Any Damage/fire Accident To The Railway Property Caused During Cutting Operation Or Delivery, 10. It Is The Responsibility Of The Purchaser To Segregate And Remove The Unwanted And Leftover Scrap Before Completion Of Delivery Of Loco. Purchaser Has Also To Keep The Cutting And Loading Spot Neat And Clean, Otherwise He May Be Penalized By The Railway, 11. The Purchaser Has To Comply All The Rules And Regulation Of Pollution Control Board Prevailing/existing In The Cutting Spot During Cutting And Dismantling Operation Of Condemned Loco, 12. The Purchaser Should Be Aware Of The Fact That Total Wt. Shown Against Heading [lot Wt. In Mt] In Lot Details Page Under Ireps Portal Is Indicative Only Against This Lot And Purchaser Should Note That During Delivery Of The Lot, The Above [lot Wt. In Mt] In Lot Details Page Is Not To Be Taken Into Consideration, 13. Bidders Are Required To Check The Detailed Conditions And Amendments / Modifications If Any, In Special Condition And In Depot Condition Against Each Lot Online For The Lot/catalogue Published For E-auction Purpose Before Bidding. Before Bidding Bidders Are Also Advised To Inspect And Tally Every Details Of The Lot Including Description, Location, Quantity, State, Hsn Code, Gst Percentage Etc With The Actual Material On Ground As Per Offer Kept With The Custodian And If Any Discrepancies Is Found, It Is Required To Be Brought To The Notice Of The Custodian As Well As To This Office For Further Action. No Complaints/claim By The Purchaser Will Be Entertained In This Regard After E Auction Sale, 14.gst, Actual Tcs And Other Taxes Will Be Calculated At The Time Of Preparation Of Challan For Final Deposition Of Bsv.

Description: Scrap Condemned Diesel Loco No.13188 Wdg3a/udl Diesel Shed [qty. 01 No. 118 Mt Approximately].i.e 1. Chassis With Driver Cab Long Hood And Radiator Room With All Accessories, -01 Nos;2. Ht Cbc Coupler - 02 Nos;3. Air Brake Pipe- 01 Loco Set;4. Truck Frame Finished Casting With All Fitting - 01 Loco Set 5. Main Reservoir - 02 Nos 6. Power Pack Complete With Tg Assembly - 01 Loco Set;7. Radiator Cores - 01 Loco Sets 8. Radiator Fan Assembly And Complete Drive Units- 01 Loco Sets 9. Traction Motors- 06 Nos (01 Loco Set),10. Rectifier Units Complete - 01 Loco Set ,11. All Small Rotating Equipment Intact - 01 Loco Set, 12. Power Cable & Control Cable- 01 Loco Set,13. E. Power Contactor -01 Loco Set, 14. Battery- 08 Nos (01 Loco Set) Condition - [1]as Is Where Is Basis[2]cutting Allowed. [3] Wheel Sets 06 Sets, Axle Box 06 Pair & Bull Gear 06 Nos. Are Excluded From Sale. Excluded Item To Be Returned To The Custodian In Good Condition By The Purchaser At The Time Of Delivery. 4.the Purchaser Should Visit The Condemned Loco As Well As Its Actual Location Before Bidding, 5. The Scrap Loco Is Sold On As Is Where Is Basis Therefore Railways Does Not Guarantee For Quality Or Quantity As Per Description Etc. And Railways Is Not Responsible For Any Type Of Shortage During Delivery, 6.dismantling And Cutting Is Permitted For Loading And Delivery Purpose, 7. The Purchaser Has To Make His Own Arrangements Such As Tools, Lifting Tackles/vehicle And Necessary Trained Men For Cutting And Dismantling The Components Of The Condemned Loco As Per Requirements, 8. The Purchaser Is Required To Stack All The Reclaimable/excluded Items At One Location Well Away From The Cut Up Parts Of The Locos And It Is Required To Be Returned To The Custodian Before Affecting The Delivery. Purchaser Should Take Adequate Precaution During Dismantling Of Excluded Fittings Item So That The Same Can Be Return Over To The Custodian In A Sound, Undamaged And Intact Condition Otherwise Railway Reserve The Right To Recover The Amount Against Damaged Item Prior To The Delivery, 9. The Purchaser Is Required To Take Adequate Safety Measures So That No Railway Property In The Near Vicinity Of Cutting Spot Are Damaged In Any Way. The Purchaser Will Be Held Responsible For Any Damage/fire Accident To The Railway Property Caused During Cutting Operation Or Delivery, 10. It Is The Responsibility Of The Purchaser To Segregate And Remove The Unwanted And Leftover Scrap Before Completion Of Delivery Of Loco. Purchaser Has Also To Keep The Cutting And Loading Spot Neat And Clean, Otherwise He May Be Penalized By The Railway, 11. The Purchaser Has To Comply All The Rules And Regulation Of Pollution Control Board Prevailing/existing In The Cutting Spot During Cutting And Dismantling Operation Of Condemned Loco, 12. The Purchaser Should Be Aware Of The Fact That Total Wt. Shown Against Heading [lot Wt. In Mt] In Lot Details Page Under Ireps Portal Is Indicative Only Against This Lot And Purchaser Should Note That During Delivery Of The Lot, The Above [lot Wt. In Mt] In Lot Details Page Is Not To Be Taken Into Consideration, 13. Bidders Are Required To Check The Detailed Conditions And Amendments / Modifications If Any, In Special Condition And In Depot Condition Against Each Lot Online For The Lot/catalogue Published For E-auction Purpose Before Bidding. Before Bidding Bidders Are Also Advised To Inspect And Tally Every Details Of The Lot Including Description, Location, Quantity, State, Hsn Code, Gst Percentage Etc With The Actual Material On Ground As Per Offer Kept With The Custodian And If Any Discrepancies Is Found, It Is Required To Be Brought To The Notice Of The Custodian As Well As To This Office For Further Action. No Complaints/claim By The Purchaser Will Be Entertained In This Regard After E Auction Sale, 14.gst, Actual Tcs And Other Taxes Will Be Calculated At The Time Of Preparation Of Challan For Final Deposition Of Bsv.

Details: Remotely Controlled Automatic Latching Crane Hook , 1 By 4 inch Drive Microlithium Cordless Long-neck Ratchet , 3 By 8 inch Drive Microlithium Cordless Long-neck Ratchet Kit , cordless Impact Driver And Cordless Combi Drill , Industrial lithium Cordless Vacuum , Industrial Cordless Jigsaw , industrial Circular Saw , Industrial Cordless Biturbo Mitre Saw , Lithium Cordless Reciprocating Saw Kit , Microlithium cordless 360 Degree Angle Head Mini Drill Kit , Cordless screw Gun With Pistol Grip Handle , Cordless Angle Grinder cutoff Tool Kit With Safety Switch , Lithium Half Inch Cordless drill Kit , Industrial Screw Gun , Lithium Cordless In-line Die grinder Kit , Industrial Cordless Planner , Industrial Cordless multi Cutter , Industrial Cordless Orbital Sander , Lithium cordless Blower , Lithium 800 Lumen Cordless Work Light , industrial Two Gear Hand Drill , Screw Gun With Collated screw Magazine Upto 5mm , Industrial Angle Grinder Dia 230mm , Lithium Cordless Large Straight Die Grinder , industrial Angle Polisher , Industrial Hot Air Heat Gun , industrial Blower And Dust Extractor , Industrial Compound slide Mitre Saw , Industrial Self Drilling Screw Driver , Two speed Industrial Magnetic Core Drill , Industrial Nibbler , industrial Metal Sheet Shear , Industrial Drill Stand , industrial Wet And Dry Heavy Duty Vacuum Cleaner , industrial Electrical Spray Paint Gun , Industrial Metal Printer , Guide Rail , Track Connector , Industrial Tables Saw , Track saw With Plunge Action And L-box Carrying Case , Industrial jigsaw

Description: CATEGORY: AMC OF CO2 FLOODING SYSTEM SV1 , AMC OF CO2 FLOODING SYSTEM SV2 , AMC OF CO2 FLOODING SYSTEM SV3 , REFILLING OF CO2 CYL , REFILLING 4.5 KG N2 CYLINDER , GAUGES FOR N2 CYLINDERS , HYDROTESTING 45KG CO2 CYLINDER , HYDROTESTING OF N2 CYLINDER , CONNECTING HOSE FOR 45 KG CO2 , Servicing of 75 KG DCP Fire Extinguisher , Servicing of 10 KG DCP Fire Extinguisher , Servicing of 9 KG DCP Fire Extinguisher , Servicing of 6.5 KG Co2 Fire Extinguisher , Servicing of 4.5 KG CO2 Fire Extinguisher , Servicing of 2 KG Clean Agent Fire Extinguisher , Servicing of 2.0 KG CO2 Fire Extinguisher , REFILLING OF FE CO2 4.5KG , REFILLING OF FE CO2 6.8KG , REFILLING CARTRIDGE DCP 10KG , REFILLING OF CARTRIDGE DCP 9KG , LARGE SIPHON TUBE FOR 9 KG DCP , SMALL SIPHON TUBE FOR 9 KG DCP , REFILLING OF FE CO2 2KG , SUPPLY DISCHARGE HOSE PIPE 6.8 , SUPPLY DISCHARGE HOSE PIPE 4.5 , HYDROTESTING OF FE DCP 10KG 9K , HYDROTESTING OF FE CO2 4.5KG , HYDROTESTING OF FE CO2 2 KG , HYDROTESTING OF FE CO2 6.8 KG , SUPPLY OF WIND SOCK , WIND SOCKS STAND 24X96IN , REFILLING and HYDROTEST FE CA 2K , PAINTING OF FE DCP 10KG 9KG , PAINTING OF FE CO2 4.5KG , PAINTING OF FE CO2 2 KG , PAINTING OF FE CO2 6.8 KG , 10 KG DCP SAFETY LOCK CLIP , DCP and CO2 FE SAFETY LEAD SEAL , 3 INCHES CAPS FOR 10 KG DCP FE , 2KG CO2 HORNS , 4.5 KG CO2 HORNS , 6.5 KG CO2 HORNS , 2 KG CO2 FE VALVES , 4.5 KG CO2 FE VALVES , 6.8 KG CO2 FE VALVES , CO2 FE LABELS , DCP FE LABELS , CO2 GRIP HANDLES , CO2 FE SAFETY PINS , CO2 FE WASHERS , 10KG DCP HOSE PIPE WITH DISCHA , 9KG DCP HOSE PIPE , FIRE HYDRANT CAPS , HYDRANT COUPLING WASHER , RUBBER BEADING FOR HOSE BOXES , SUPPLY DISCHARGE HORN CO2 , REFILLING OF CO2 CARTRIDGES 9K , CAP WASHER FOR 10 KG DCP , CAP WASHER FOR 9 KG DCP , 10 KG DCP HOSE and GUN , 9 KG DCP HOSE and GUN , 25 KG DCP CAP , 2.5 4.5 KG CO2 FE LABELS , 9KG 10KG DCP FE LABELS , LABELS FOR 25 KG DCP , LABELS FOR 75 KG DCP , CONNECTING PIPE and HOSE FOR 25 K , CONNECTING PIPE and HOSE FOR 75 K , 9 KG DCP SAFETY LOCK CLIP , PAINTING OF FE DCP 25KG , PAINTING OF FE DCP 75KG , UT THICKNESS TESTING FE 10KG , UT THICKNESS TESTING OF FE 75K9 , UT THICKNESS TESTING OF FE 10KG 9KG , UT THICKNESS TESTING OF FE 4.5 , UT THICKNESS TESTING OF FE 2 K , REFILLING and HYDROTESTING SCBA , WATER GEL BLANKET , DCP POWDER , PRESSURE GAUGE , DCP 75 KG CAP , REFILLING and HYDROTESTING OF CA , 10KG DCP DISCHARGE HOSE PIPE , CO2 4.5 KG CO2 GRIP HANDLES , CAPS FOR 9 KG DCP FE , CAPS FOR 10 KG DCP FE , BEND PIPE CO2 2 KG , CO2 2 KG CO2 GRIP HANDLES , 2 KG CO2 SAFETY LOCK CLIP AND , INNER CONTAINER 10 KG DCP , PLUNGER FOR DCP 9 KG , CONNECTING PIPE and HOSE FOR 75 KG , AFFF 3 percent FOAM , UT THICKNESS TESTING OF FE 75K , UT THICKNESS TESTING OF FE 25K

Description: CATEGORY: Abgel for Hemostatic sponge box of 2 , Adult Diaper Size Large Pkt of 10 , Arterial Leadercath 3Fr , Bakri Balloon Size , Central Venous Catheter Line Dressing , Continuous Glucose Monitoring System Sensor with freestyle libre , Cotton cast padding orthoroll 10cm 3mtr , Disposable HIV HbsAg protection surgical kit , Dressing Medicated Gauze Paraffin 10 cm 10 cm tin of 10 dressing , Dressing Post-OP medicated 10cm 25cm , H2O2 sol with stabilizer IP 500 ml bott , Indicator Sodalime jar of 5kg , Kellys Pad , Knife Bard parker, blade size 1 fitting commercial No 11 packet of 6 , Knife Bard parker, blade size 1 fitting commercial No 15 packet of 6 , Ligating Clip Cartridges LT300 , Ligating Clip Cartridges LT400 , Lower Segment Caesarean Section Pack , Monopersulphate Compund surface cleaners 500gm , Mucous Sucker , OT Gown disposable , OT Pack , Peracetic acid 0 point 25 perc High Level disinfectant bott of 810gm , Plain Sterile Drape Sheet Size 120 x 210cm , Plastic Apron Sterile Single pack , Romo Vac Suction drain of set size 16 , Romo Vac Suction drain of set size 18 , Romo Vac Suction drain set of size 08 , Ryles Tube S 10 , Ryles Tube S 12 , Silicon Scar Sheets 1point 6in into 120inc Roll , Silk Braided Size 1 70 76cm Reverse cutting 45mm , Skin Grafting Blade Carbon Steel Sterile , Skin Stapler , Spinal Needle Size 24 , Spinal Needle Size 25 , Spinal Needle Size 26 , Spinal Needle Size 27 , Sterilised Suture Catgut Chromic Pre Knotted Loop 50cm 1 5 metric pack of 6 , Supraglottic device with non inflatable cuff gastric drain port 1 point 5 , Supraglottic device with non inflatable cuff gastric drain port 2 point 0 , Supraglottic device with non inflatable cuff gastric drain port 2 point 5 , Supraglottic device with non inflatable cuff gastric drain port Size 1 , Surgical Skin Marker Sterile , Suture cutting 3 by 8 circle 16mm 4 0 monofil non abs 70cm polyamide , Suture Silk Braided Size 2 70 76cm Reverse cutting 45mm , Three way silicon Foleys Catheter S 16 , Three way silicon Foleys Catheter S 18 , Three way stock cock with Extension Tube Length 10cm , Three way stock cock with Extension Tube Length 50cm , Triple Lumen CVC Catheter 5FR , Tube Endo tracheal Reinforced PVC size 2 point 5 micro cuff , Tube Endo tracheal Reinforced PVC size 3 point 0 micro cuff , Tube Endo tracheal Reinforced PVC size 3 point 5 micro cuff , Tube Endo-tracheal Reinforced PVC size 4 point 0 micro cuff , Tube Endo tracheal Reinforced PVC size 4 point 5 micro cuff , Tube Endo tracheal Reinforced PVC size 5 point 0 micro cuff , Tube Endo-tracheal Reinforced PVC size 5 point 5 micro cuff , Tube Endo tracheal Reinforced PVC size 6 point 0 micro cuff , Tube Endo tracheal Reinforced PVC size 6 point 5 micro cuff , Tube Endo tracheal Reinforced PVC size 7 point 0 micro cuff , Tube Endo tracheal Reinforced PVC size 7 point 5 micro cuff , Tube Endo tracheal Reinforced PVC size 8 point 0 micro cuff , Tube Endo-tracheal Reinforced PVC size 8 point 5 micro cuff , Urine bag with volume meter , Urine culture bottle

Description: CATEGORY: Hu CD3 Horizon V450 UCHT1 120Tst , CD45 V500-C RUO , Hu CD5 BV605 UCHT2 100Tst , Hu CD117 BV605 104D2 50Tst , Anti-MPO FITC 5B8 50 Tests RUO-GMP , CD79a PE HM47 50 Tests RUO-GMP , CD34 PerCP-Cy5point5 8G12 50 Tests RUO-GMP , CD19 PE-Cy7 SJ25C1 100 Tests RUO-GMP , Hu CD22 APC HIB22 100Tst , CD7 APC-R700 -M-T701- RUO , CD3 APC-H7 SK7 100 Tests RUO-GMP , CD20 V450 L27 100 Tests RUO-GMP , CD10 APC HI10a 100 Tests RUO-GMP , CD38 APC-H7 -HB7- RUO , Hu CD1a BV605 SK9 50ug , CD8 PerCP-Cy5point5 SK1 50 Tests RUO-GMP , CD2 PE-Cy7 L303point1 100 Tests RUO-GMP , Anti-TdT APC E17-1519 100 Tests RUO-GMP , CD56 APC-R700 NCAM16point2 RUO , Anti-HLA-DR V450 100 Tests RUO-GMP , CD15 FITC MMA 100 Tests RUO-GMP , CD13 PE L138 100 Tests RUO-GMP , CD117 PE-Cy7 104D2 100 Tests RUO-GMP , CD33 APC P67point6 100 Tests RUO-GMP , CD64 APC-R700 MD22 RUO , CD14 APC-H7 MphiP9 100 Tests RUO-GMP , CD41a FITC HIP8 50 Tests RUO-GMP , Hu CD105 PE 266 100Tst , CD123 APC -9F5- RUO , CD71 APC-H7 M-A712 RUO , BD FACS Lysing Solution 10X 100ML IVD , BD FACSFlow Sheath Fluid 20L , BD FACS Clean Solution 5L , BD IntraSure Kit RUO , Hu CD10 BV605 HI10A 100Tst , CD4 V450 -SK3- RUO , Hu CD200 PE MRC OX-104 100Tst , CD79b PerCP-Cy5point5 SN8 RUO , CD43 APC-H7 -1G10- RUO , CD56 PE MY31 100 Tests RUO-GMP , CD16 PE-Cy tm7 , CD235a FITC Mouse anti-human , PE Mouse Anti-Human CB1 TCR , TCR-C B1-PE- Cyanine7 , PE Mouse Anti-Human CB2 TCR , CD8 FITC SK1 100 Tests RUO-GMP , CD5 PerCP-Cy5point5 L17F12 50 Tests RUO-GMP , TCR gamma-delta-1 PE-Cy7 -11F2- RUO , Hu CD11b-MAC-1 BV605 ICRF44 100Tst , Anti-Lambda FITC 1- 155-2 50Tst RUO-GMP , Anti-Kappa PE TB28-2 50 Tests RUO-GMP , Hu CD36 BV605 CB38 100Tst , CD23 FITC EBVCS-5 RUO , BD FC Beads 5-color kit , BD FC Beads 7- color kit

Description: CATEGORY: WORK LAMP 24V,PART NO-ZC00000097 , BOLT,PART NO- J900825 , FAN,PART NO-263J210601 , MOTOR OIL,PART NO- YA00011207 , GAS SPRING,PART NO-YA00004389 , SEAL RUBBER,PART NO-YA00040963 , SEAL RUBBER,PART NO- YA00040962 , SEAL RUBBER,PART NO-YA00040965 , SEAL RUBBER,PART NO-YA00040964 , TRIM SEAL,PART NO- YA00031323 , GRILLE,PART NO-TA66013 , TAIL PIPE,PART NO-YA40042296 , REAR GLASS,PART NO-TE29749 , REAR WIPER ASSY,PART NO-TC22426 , FRONT GLASS,PART NO- TE29753 , RIM,PART NO-TC66042 , VALVE AIR,PART NO- TD66094 , AFTER-TREATMENT SYSTEM,PART NO-TB66071 , COVER,PART NO-YA00038689 , BRACKET,PART NO- YA40025100 , BOLT M10 X 25,PART NO-J901025 , BOLT,PART NO-J901016 , WASHER PLAIN,PART NO-4711782 , FRONT FENDER RH,PART NO-TC66020 , COVER RH,PART NO-YA00004380 , SCREW,PART NO-J650820 , WASHER SPRG M8,PART NO-A590908 , WASHER M10,PART NO- J222010 , HARNESS,PART NO-TC22543 , WASHER PLANE,PART NO-A590104 , SPR WASHER,PART NO-A590904 , SCREW SEMS M4X16,PART NO-J460416 , PIPE AND BRAKET ASY,PART NO-TE66157 , BRACKET BEACON LAMP 24V,PART NO-TD60503 , PLUG,PART NO-TE68099 , O RING,PART NO- TE68062 , BLOCK MANIFOLD,PART NO-TD66244 , PRESS SWITCH 25 BAR NO,PART NO-TD66507 , MIRROR ASSY RH,PART NO-TE09090 , MIRROR ASSY LH,PART NO-TE09089 , CAP ASSEMBLY,PART NO-TE11119 , REDUCER HOSE,PART NO-TE66150 , CLAMP BOLT,PART NO-WD01222 , PRE CLEANER,PART NO-TD13207 , BUSHING,PART NO-3060476 , TOOTH POINT,PART NO-TB00822 , PIN,PART NO-TE04412 , WASHER,PART NO-TE03584 , FILTER OIL,PART NO-4658521 , FILTER,PART NO-4616544 , FUEL FILTER,PART NO-4616864 , COUPLING,PART NO-4067834 , SUPER COOL 30 COOLANT,PART NO-TL05210 , ROLLER UPPER,PART NO- 9099140 , SEAL OIL,PART NO-4359550 , BUSHING,PART NO- 4359549 , O RING,PART NO-A810125 , SEAL KIT ARMARM CYL SEAL KIT,PART NO-4465647 , SWITCH START,PART NO- 4448303 , KIT SEAL BUCKET CYLINDER,PART NO-4438681 , ELEMENT INNER,PART NO-4466268 , ELEMENT OUTER,PART NO-4466269 , BEARING,PART NO-4274541 , 991725 RETANR,PART NO-991725 , PIN SPRING SPRING STOPPER,PART NO-4288767 , PLATE THRUST,PART NO- 4269295 , BEARING NEEDLE,PART NO-4452480 , SPACER,PART NO-4263905 , HOSE,PART NO-4451914 , PIN SPRING,PART NO-4222030 , PLATE THRUST,PART NO- 4219595 , BEARING NEEDLE,PART NO-4452484 , HOSE,PART NO-4451915 , PIN SPRING,PART NO-4207947 , PLATE THRUST,PART NO-4201968 , BEARING NEEDLE,PART NO- 4452483 , CAP,PART NO-4466044 , PIN SPRING,PART NO- 4203180 , O RING,PART NO-4203187 , BALL BEARING,PART NO-4200411 , O RING,PART NO-4271596 , BUSHING,PART NO-3079233 , BUSHING,PART NO-3026075 , BUSHING,PART NO-420102 , BUSHING,PART NO-4205109 , PIN,PART NO- 3055219 , PIN,PART NO-3060475 , PIN,PART NO-3093215 , PIN,PART NO-3079232 , O RING,PART NO-A811085 , O RING,PART NO-4153544 , O RING,PART NO-Z966993 , CLAMP HOSECLAMP PIPE,PART NO-4242347 , BOLT,PART NO-J271285 , RUBBER,PART NO-4439299 , BAND,PART NO- 4441140 , LOCK,PART NO-4426044 , WIPER-MOTOR,PART NO-4453690 , WIPER ARM,PART NO-4453687 , WIPER BLADE,PART NO-4453686

Description: CATEGORY: Cap Hyd for SSL BOB CAT with Cat Part No 6727475 , Filter Oil for SSL BOB CAT with Cat Part No 6675517 , Fuel Filter for SSL BOB CAT with Cat Part No 6667352 , Hyd Element for SSL BOB CAT with Cat Part No 7024037 , Hose for Size IV Dozer With Cat Part No 67185H , Hose Water for Size IV Dozer With Cat Part No 505062 , Hose Water Seprator for Size IV Dozer With Cat Part No HS1011200SS , Hose water Seprator To Filter Fuel for Size IV Dozer With Cat Part No HS1002100SS , Toogal Swich for Size IV Dozer With Cat Part No 500278 , Indicator Light for Size IV Dozer With Cat Part No 501115 , Pressuer Gauge Fuel for Size IV Dozer With Cat Part No 500419 , Hose for Size IV Dozer With Cat Part No HS0400900MS , Negative Terminal for Size IV Dozer With Cat Part No 26101337 , Belt Alternator for Size IV Dozer With Cat Part No , Positive Terminal for Size IV Dozer With Cat Part No 26101327 , Positive Brush Connector for Size IV Dozer With Cat Part No 9030101 , Negative Brush Connector for Size IV Dozer With Cat Part No 903071 , Brush for Size IV Dozer With Cat Part No 9030644A , Split Pin for Size IV Dozer With Cat Part No 9030837 , Key Swich for Size IV Dozer With Cat Part No 070502000000 , Warming Lamp for Size IV Dozer With Cat Part No 610300030001 , Dash Lamp for Size IV Dozer With Cat Part No 070G03000000 , Rear Lamp for Size IV Dozer With Cat Part No 310800021400 , Front Head Lamp for Size IV Dozer With Cat Part No 310800021400 , Light Unit for Size IV Dozer With Cat Part No 26570021 , Cable and Bulb Holder for Size IV Dozer With Cat Part No 26840069 , Ammeter for Size IV Dozer With Cat Part No 071001502020 , Stainer for Size IV Dozer With Cat Part No 1300411120 , Hose for Size IV Dozer With Cat Part No HS0406000SS , Hose for Size IV Dozer With Cat Part No HS0402000SS , O Ring for Size IV Dozer With Cat Part No 0700003135 , Filter Oil for Size IV Dozer With Cat Part No 1301045111 , Hose Oil Pump to main Clutch Case for Size IV Dozer With Cat Part No 0726003216 , Stainer for Size IV Dozer With Cat Part No 1306013260 , Hose for Size IV Dozer With Cat Part No 0726003210 , Hyd Filter for JCB with Cat Part No 40 or 300893 , Throtal Cable for JCB with Cat Part No 332 or Y3852 , Fuel Filter for JCB with Cat Part No 02 or 910930 , Water Separator for JCB with Cat Part No 33 or Y2490 , Oil Filter for JCB with Cat Part No 02 or 910140A , Hyd Filter for JCB with Cat Part No 02 or 910155A , Hose Hyd for JCB with Cat Part No 625 or 80002 , Air Filter for JCB with Cat Part No 335 or Y2811 , Fuel Stainer for JCB with Cat Part No 332 or Y3299 , Side Cutter L for JCB with Cat Part No 40 or 303376 , Washer for JCB with Cat Part No 980 or 84768 , Hyd Filter 2nd for JCB with Cat Part No 335 or C7872 , Air Cleaner for JCB with Cat Part No 334 or Y2810 , Belt for JCB with Cat Part No 6009 or 3827Z , Nut for JCB with Cat Part No 173R020V2 , Belt for JCB with Cat Part No 6009 or 38262 , Cap Radiator for JCB with Cat Part No 332 or Y4005 , Climp Hose for JCB with Cat Part No 332 or Y3292 , Head Lub Oil Filter for JCB with Cat Part No 2910985 , Side Cutter R for JCB with Cat Part No 40 or 303377 , Tooth Bocket for JCB with Cat Part No 40 or 303603 , Bolt for JCB with Cat Part No 13050 or 0716Z , Nut for JCB with Cat Part No 1340 or 0701Z , Air Filter Outer for JCB with Cat Part No 32 or 915802 , Air Filer Inner for JCB with Cat Part No 32 or 915801 , Engine Oil Filter for JCB with Cat Part No 320 or 04134 , Fuel Filter for JCB with Cat Part No 320 or 070394

Description: CATEGORY: Gasket for Size IV Dozer With Cat Part No 21710 , O Ring for Size IV Dozer With Cat Part No 178937 , Screen Filter or Stainer for Size IV Dozer With Cat Part 20622 No 21710 , Plug Drain for Size IV Dozer With Cat Part No 501390 , Gasket for Size IV Dozer With Cat Part No 121907 , Spring for Size IV Dozer With Cat Part No 68274 , O Ring for Size IV Dozer With Cat Part No 173368 , Gasket for Size IV Dozer With Cat Part No 8265 , Element Filter Lub Oil for Size IV Dozer With Cat Part No 3228067 , Gasket for Size IV Dozer With Cat Part No 173161 , Gasket Cover Lub Oil Cooler for Size IV Dozer With Cat Part No 68210 , Ring O Rubber for Size IV Dozer With Cat Part No 3019116 , Retainer O Ring for Size IV Dozer With Cat Part No 110827 , Gasket Housing to Block for Size IV Dozer With Cat Part No 121779 , Hose for Size IV Dozer With Cat Part No 63495 , Clamp for Size IV Dozer With Cat Part No 43828D , Pipe Water Bypass for Size IV Dozer With Cat Part No 32374667 , Hose for Size IV Dozer With Cat Part No HS0802400SS , Gasket Techometer Housing for Size IV Dozer With Cat Part No 70732 , Seal Technometer Drive for Size IV Dozer With Cat Part No 70809 , Seal Cap Filter for Size IV Dozer With Cat Part No 147901 , Screen filter For Size IV Dozer With Cap Part No 3234051 , Element or Service AR 3245217 for Size IV Dozer With Cat Part No 256834 , Gasket for Size IV Dozer With Cat Part No 151881 , Ring Rubber O for Size IV Dozer With Cat Part No 134736 , Elbow Connector for Size IV Dozer With Cat Part No129859 , O Ring for Size IV Dozer With Cat Part No129858 , Hose Fuel Filter To Pump for Size IV Dozer With Cat Part No HS1001500SS , Gasket Copper for Size IV Dozer With Cat Part No 94262 , Gasket Fuel Connection for Size IV Dozer With Cat Part No 70854 , Hose Drain To Tank for Size IV Dozer With Cat Part No HS08009300SS , Ring Sealing for Size IV Dozer With Cat Part No 160196 , Ring Rubber O for Size IV Dozer With Cat Part No 70624 , Gasket for Size IV Dozer With Cat Part No 70441 , Gasket for Size IV Dozer With Cat Part No 132730 , Spring for Size IV Dozer With Cat Part No 132721 , Element Corrosion Resister for Size IV Dozer With Cat Part AR95679 , Clamp Hose for Size IV Dozer With Cat Part No 43828 , Hose for Size IV Dozer With Cat Part No 63411 , Hose for Size IV Dozer With Cat Part No 64998H , Gasket for Size IV Dozer With Cat Part No 66258 , Clamp Hose for Size IV Dozer With Cat Part No 43828D , Hose Water By Pass for Size IV Dozer With Cat Part No632411 , Gsket Manofold To Cylinder Head for Size IV Dozer With Cat Part No142234 , Gasket for Size IV Dozer With Cat Part No 63575 , Gasket for Size IV Dozer With Cat Part No 3008591 , Gasket for Size IV Dozer With Cat Part No 501924 , Gasket for Size IV Dozer With Cat Part No 67946 , Elbow for Size IV Dozer With Cat Part No 68139 , Gasket for Size IV Dozer With Cat Part No 118273 , Gasket for Size IV Dozer With Cat Part No 501671 , Assy Element Inner for Size IV Dozer With Cat Part No 504209 , Assy Element Outer for Size IV Dozer With Cat Part No 504210 , Washer Rubber for Size IV Dozer With Cat Part No 504218 , Ring Rubber for Size IV Dozer With Cat Part No 504322 , Assy Pre Cleaner for Size IV Dozer With Cat Part No AR3246288 , Belt Fan for Size IV Dozer With Cat Part No 178622 , Clamp Hose for Size IV Dozer With Cat Part No 43828A , Clamp Hose for Size IV Dozer With Cat Part No 438223D , Hose for Size IV Dozer With Cat Part No 67185